Answer:
Adaptation 1 is an adaptation to life cycle, Adaptation 2 is an adaptation to physical characteristics.
Explanation:
Answer:
Adaptation 1: A hornwort is a nonflowering plant that produces a large number of spores instead of seeds
An antacid tablet weighs 2.10 grams. It requires 45.67 mL of 0.105 M of HCI solution to react completely with the carbonate present in the tablet. Determine the mass of CaCO3 present in the tablet?
Answer:
≅ 0.240 grams (3 sig. figs.)
Explanation:
Rxn: CaCO₃ + 2HCl => CaCl₂ + H₂O + CO₂
Given: ?g 45.67ml(0.105M)
= 0.04567L x 0.105 mole/L
= 0.0048 mole HCl
Rxn ratio for CaCO₃ to HCl is 1:2
∴ moles CaCO₃ consumed = 1/2 of moles HCl used
=> 1/2(0.0048)mole CaCO₃ used = 0.0024 mole CaCO₃
mass CaCO₃ = 0.0024 mole CaCO₃ x 100.09 grams CaCO₃/mole CaCO₃
= 0.23998 grams CaCO₃ (calculator answer)
≅ 0.240 grams (3 sig. figs.)
Using the following equation:
2 NaOH + H2SO4 à 2 H2O + Na2SO4
How many grams of sodium sulfate will be formed if you start with 200 grams of sodium hydroxide and you have an excess of sulfuric acid?
A balloon filled with helium has a volume of 30.0 L at a pressure of 100 kPa and a temperature of 15.0°C. What will the volume of the balloon be if the temperature is decreased to -80.0°C and the pressure remains constant?
Answer:
[tex]V_2=20.1L[/tex]
Explanation:
Hello there!
In this case, since this is a problem in which the pressure of the gas remains constant, we can use the Charles' law as a directly proportional relationship between temperature (in Kelvins) and volume given by:
[tex]\frac{V_2}{T_2} =\frac{V_1}{T_1}[/tex]
Thus, solving for the final volume as the temperature is decreased to -80.00 °C, we obtain:
[tex]V_2=\frac{V_1T_2}{T_1}[/tex]
[tex]V_2=\frac{30.0L*(-80+273)K}{(15+273)K} \\\\V_2=20.1L[/tex]
Best regards!
2.54 mL of ethanol to mol ethanol
An empty graduated cylinder has a mass of 42.91 g. When filled with 40.00 mL of an unknown liquid, it has a mass of 103.26 g. Calculate the density of the unknown liquidz
Answer:
1.511g/mL
Explanation:
To find density, we can use the equation
[tex]d=\frac{m}{V}[/tex]
We have V (40mL) To find m (mass), we must subtract as such:
[tex]103.36-42.91=60.45[/tex]
60.45 grams is the mass of the unknown liquid.
Now, we plug the values we have into the density equation.
[tex]d=\frac{60.45g}{40.00mL} \\\\ d=1.511\frac{g}{mL}[/tex]
The density of the unknown liquid is 1.51 g/mL
Density can be defined as the mass of an object per unit volume of the object.
[tex]Density = \frac{mass}{volume}[/tex]
To solve the question given above, we'll begin by calculating the mass of the unknown liquid. This can be obtained as follow:
Mass of empty cylinder = 42.91 g
Cylinder + unknown liquid = 103.26 g
Mass of unknown liquid =?Mass of unknown liquid = (Cylinder + unknown liquid) – (Mass of empty cylinder)
Mass of unknown liquid = 103.26 – 42.91
Mass of unknown liquid = 60.35 gFinally, we shall determine the density of the unknown liquid. This can be obtained as follow:
Mass of unknown liquid = 60.35 g
Volume of unknown liquid = 40 mL
Density of unknown liquid =?Density = mass / volume
Density = 60.35 / 40
Density of unknown liquid = 1.51 g/mLTherefore, the density of the unknown liquid is 1.51 g/mL
Learn more: https://brainly.com/question/17262276
What are the chemical symbols for the elements calcium, carbon, and chlorine respectively? es
A) CL, C, and Ce
B) C, Ca, and Co
C) Ca. C, and CL
D) Ca, Co, and CL
Answer:
C
Explanation:
Which group of reptiles is the largest in terms of body size?
Answer : if you have time for learning and is in 6th grade the anwser is crocodilians
Explanation: i got it right
Concentration is ? 
What do you call the reaction between magnesium hydroxide and hydrochloric acid?
Answer:
neutralization reaction
The neutralization reaction is the reaction between Mg(OH)2 (a weak base) and HCl (a strong acid).
Explanation:
Gallium (Ga, 69.723 g/mol) is a metalloid obtained from its salts during the smelting of ores of other elements, like Zinc, Ga has broad applicability in the electronics industry. It is also used as a safe replacement for mercury in thermometers as it melts at 29.8 oC and has a heat of fusion of 5.59 kJ/mol. What is the entropy change of of gallium in as it melts when placed on a surface at 29.8 oC?
Answer:
4.255 J/ K
Explanation:
Given data :
mass of Gallium = 16 gm
molar mass = 69.723 g/mol
hence no of moles = 16 / 69.723 = 0.23 moles --------- ( 1 )
Δh ( heat fusion ) = 5.59 KJ/mol
Temperature = 29.8°C = 302.8 k
Determine the entropy change of gallium
Δs ( entropy change ) = heat fusion / temperature
= ( 5.59 * 1000) J/mol / 302.8 = 18.46 J/k*mol
Hence entropy change of gallium
= Δs * no of Gallium moles
= 18.46 * 0.23 = 4.255 J/ K
3.00 g of a fuel (MW = 650.0 g/mol) is combusted in a bomb calorimeter. The temperature of the calorimeter increases by 25.0 degrees Celsius. The heat capacity for the calorimeter has been determined to be 9.001kJ/C. What is the heat of reaction (in kJ/mol)?
Answer:
-4.88 × 10⁴ kJ/mol
Explanation:
Step 1: Calculate the heat gained by the calorimeter (Qcal)
We will use the following expression.
Qcal = C × ΔT
where,
C: heat capacity of the calorimeterΔT: temperature changeQcal = 9.001 kJ/°C × 25.0°C = 225 kJ
Step 2: Calculate the heat released by the fuel
According to the law of conservation of energy, the sum of the heat released by the fuel (Qf) and the heat absorbed by the calorimeter is zero.
Qf + Qcal = 0
Qf = -Qcal = -225 kJ
Step 3: Calculate the heat of reaction in kJ/mol
3.00 g of a fuel (MW = 650.0 g/mol) released 225 kJ of heat. The heat of reaction is:
-225 kJ/3.00 g × 650.0 g/mol = -4.88 × 10⁴ kJ/mol
what part of the food chain is a lemming
a:producer
b:secondary consumer
c:primary consumer
d: predator
hmm...for your answer I think it would be D
Answer:
primary consumer
Explanation:
Lemmings are primary consumers.
what does an electromagnet create?
a. electricity
b. magnet
c. neutrons
Answer:
Electromagnet creates electricity.
Explanation:
How much NaCl would you dissolve and dilute to the 100.00 mL mark in a volumetric flask with DI H2O to prepare a 0.825 M sodium chloride solution?
Answer:
4.82 g
Explanation:
To solve this problem we'll use the definition of molarity:
Molarity = moles / litersWe are given the volume and concentration (keep in mind that 100mL=0.100L):
0.825 M = moles / 0.100 LNow we calculate the number of NaCl moles required:
moles = 0.0825 molThen we convert 0.0825 NaCl moles into grams, using its molar mass:
0.0825 mol * 58.44 g/mol = 4.82 ghelp out here plzzzzzzzzzzzzz
Answer:
Chromosomes are duplicated in the "s phase" of interphase.
Chlorination of phenol gives para product but bromination of phenol gives Ortho para product why
Answer:
here you go
Explanation:
The reaction of phenol with bromine is known as bromination of phenol. Solvent has great influence on the reaction. In different solvents, different products are obtained. The action of bromine on phenol can be explained as:
Reaction with bromine in water:—-
Reaction with bromine in water
Phenol reacts with bromine water to give 2,4,6-tribromophenol.
In water, ionisation is facilitated. Phenol gets ionised to form phenoxide ion, which is even better ortho,para-directing. Bromine also gets ionised to a larger extent to form a large number of bromonium ions. And Bromine ions are highly stabilized in ionic solvents. So the formation of strong o,p-directing group and stabilization of Br+ enhances the formation of tribromophenol.
Reaction with bromine in CS2:—-
Reaction with bromine in non-polar organic solvents
Phenol reacts with bromine in a presence of Carbon disulphide to form a mixture of o-bromophenol and p-bromophenol. Among which p-bromophenol predominates. In CS2 ionisation is not facilitated that much. As it is a non-polar solvent it doesn't the Br+ on. Also −OH group is moderately o,p-directing. So as usual para-product is more formed.
find the percentage of mass in each of the element Ca ( HCO3)2 (Ca= 40, H = 1, O = 16, C= 35)
Answer:
% Ca = 24.69%
% H = 1.2%
% C = 14.8%
% O = 59.25%
Explanation:
The percentage by mass of each element can be calculated by dividing the mass of each element in the compound by the molar mass of the compound.
Molar mass of Ca(HCO3)2
Where; (Ca= 40, H = 1, O = 16, C= 12)
= 40 + {1 + 12 + 16(3)}2
= 40 + {13 + 48}2
= 40 + {61}2
= 40 + 122
= 162g/mol
- % mass of Ca = 40/162 × 100
= 0.2469 × 100
= 24.69%
- % mass of H = 2/162 × 100
= 0.012 × 100
= 1.2%
- % mass of C = 24/162 × 100
= 0.148 × 100
= 14.8%
- % mass of O = 96/162 × 100
= 0.5925 × 100
= 59.25%
Whats molecular formula of 26,4% carbon , 3,3 % Hydrogen and 70,3% oxygen?
Explanation: Therefore the molecular formula is twice the empirical formula: C2H6O2. The compound dioxane contains only carbon, hydrogen, and oxygen. When 0.956 g dioxane is burned, 1.91 g carbon dioxide and 0.782 g water are formed. In another experiment, it was determined that 6.04x10-3 mol dioxane weighs 0.532 g.
What might happen if an endocrine hormone such as thyroid hormone was controlled by positive instead of negative feedback?
Answer:
cdg I will be a little late to the party but I have to go to the store and get ❤️❤️❤️❤️❤️❤️
What is the difference between global warming and climate change? *
1 point
There is no difference, we can use either term
Climate change happens because of humans, global warming happens naturally
Global warming focuses only on temperature increases, climate change only focuses on temperature decreases
Global warming focuses only on temperature increasing, climate changes is a broader term that refers to the range of changes happening on Earth in addition to temperature changes
Answer: D: Global warming focuses only on temperature increasing, climate changes is a broader term that refers to the range of changes happening on Earth in addition to temperature changes
Explanation:
Answer:
what he/she said
Explanation:
5 points! Please don’t guess if u don’t know!
Salts usually have a low melting point.
A. true
B. false
This is true. that's why we use it for snow
Answer:
false
Explanation:
ya thats why we use it for boiling water
help me brainly
A man washes clothes in a stream using a detergent that contains phosphorus. Which type of pollution is this?
Question 2 options:
toxic
sediment
nutrient
bacterial
Answer:
bacterial or toxic please
Ammonium phosphate is an important ingredient in many solid fertilizers. It can be made by reacting aqueous phosphoric acid with liquid ammonia. Calculate the moles of ammonium phosphate produced by the reaction of of ammonia. Be sure your answer has a unit symbol, if necessary, and round it to significant digits.
The given question is incomplete. The complete question is:
Ammonium phosphate [tex](NH_4)_3PO_4[/tex] is an important ingredient in many solid fertilizers. It can be made by reacting aqueous phosphoric acid [tex]H_3PO_4[/tex] with liquid ammonia. Calculate the moles of ammonium phosphate produced by the reaction of 1.7 mol of ammonia. Be sure your answer has a unit symbol, if necessary, and round it to the correct number of significant digits.
Answer: 0.57 moles of ammonium phosphate are produced by the reaction of 1.7 moles of liquid ammonia
Explanation:
The balanced chemical equation is:
[tex]H_3PO_4+3NH_4OH\rightarrow (NH_4)_3PO_4+3H_2O[/tex]
According to stoichiometry:
3 moles of liquid ammonia [tex](NH_4OH)[/tex] produces = 1 mole of ammonium phosphate [tex](NH_4)_3PO_4[/tex]
Thus 1.7 moles of liquid ammonia [tex](NH_4OH)[/tex] produces = [tex]\frac{1}{3}\times 1.7=0.57[/tex] mole of ammonium phosphate [tex](NH_4)_3PO_4[/tex]
Thus 0.57 moles of ammonium phosphate are produced by the reaction of 1.7 moles of liquid ammonia
Which statement best illustrates how mixtures and pure substances are different?
Mixtures have color; pure substances are colorless.
Mixtures have various odors; pure substances are odorless.
Mixtures are found on the periodic table; pure substances are not.
Mixtures are physically combined; pure substances are chemically combined.
Answer:
Mixtures are physically combined and pure substances are chemically combined.Listed below are characteristics that serve as evidence of shared ancestry between fish and reptiles. Select the option that applies only to embryos rather than adults (1 point)
Ogill slits that turn into gills
O hatch from and lay eggs
O scales as a form of skin
Ospines and tails
Answer:
Its option A
Explanation:
It cant be option B because the adults lay the eggs, option A is correct because they embryos gill slits turn into gills.
Predict the shape of the molecule.....
Answer:
bent
Explanation:
What is the key difference between a liquid and a gas?
Answer:
What is the key difference between gases and liquids? EZZZZZ. The particles in a liquid are attracted to one another; the particles in a gas *are not attracted *.
Explanation:
Rank the following carboxylic acids by acid strength, with the strongest at the top and the weakest at the bottom. It may help to draw each Lewis structure. Drag and drop options into correct order.For keyboard navigation...SHOW MORE Press space or enter to grab A. CF3CO2H B. CHF2CO2HC. CH2FCO2H D. CH3CO2H
Answer:
[tex]$CF_3CO_2H> CHF_2CO_2H>CH_2FCO_2H>CH_3CO_2H$[/tex]
Explanation:
Florine has the highest electronegativity and it thus pulls the element of [tex]$OH^-[/tex] groups in the COOH group towards itself, making it relatively easy to loose the proton of the carboxyl group.
F O
↑ ||
F← C ← C ← O - H , Here three Florine withdraw
↓
F
F O
↑ ||
F← C ← C - O H , Here two Florine withdraw
↓
H
F O
| ||
H - C - C - OH , Here one Florine withdraw
↓
H
H O
| ||
H - C - C - OH , Here no Florine withdraw
|
H
Those substances which release H+ ion when mixed in the solution is called acid.
The strength of the acid depends on the following:-
Concentration of H+
The lewis structure state and define the number of electrons in the outermost shell of the electrons and help us to find the valency.
According to the question, we have to find the weakest carboxylic acid. Therefore the sequence are in increasing order and it is as follows:-
[tex]CF_3Co_2H[/tex]>[tex]CHF_2CO_2H[/tex]>[tex]CH_2FCO_2H>CH_3CO_2H[/tex]
This is the increasing order of the compounds.
For more information, refer to the link:-
https://brainly.com/question/15804584
Two different bromide solutions are mixed with each other: Solution 1 is an aqueous solution of 4.85 g aluminum bromidein 150. ml water and solution 2 has a volume of 175 ml and contains 7.75 g of zinc bromide. You mix the two solutions together in a large beaker. What is the bromide concentration in moles/L in the mixture
Answer:
M=0.380 M.
Explanation:
Hello there!
In this case, given those two solutions of aluminum bromide and zinc bromide, it is firstly necessary to compute the moles of bromide ions in each solution as shown below:
[tex]n_{Br^-}^{in\ AlBr_3}=4.85 gAlBr_3*\frac{1molAlBr_3}{266.69gAlBr_3}*\frac{3molBr^-}{1molAlBr_3} =0.05456molBr^-\\\\n_{Br^-}^{in\ ZnBr_2}=7.75gZnBr_2*\frac{1molZnBr_2}{225.22gZnBr_2}*\frac{2molBr^-}{1molZnBr_2} =0.06882molBr^-[/tex]
Now, we compute the total moles of bromide:
[tex]n_{Br^-}=0.05456mol+0.06882mol\\\\n_{Br^-}=0.12338mol[/tex]
Then, the total volume in liters:
[tex]150mL+175mL=325mL*\frac{1L}{1000mL} \\\\=0.325L[/tex]
Therefore, the concentration of total bromide is:
[tex]M=\frac{0.12338mol}{0.325L}\\\\M=0.380M[/tex]
Best regards!
How are ocean waves formed? gravity energy transfer conduction radiation
Answer:
I apologize that I'm late and all But your answer is B. Energy Transfer.
Explanation:
The waves transfer energy to the sand for example.