Give the product expected when the following alcohol reacts with pyridinium chlorochromate (PCC). (Assume that PCC is present in excess.) The starting material is a 4 carbon ring where carbon 1 is bonded to O H and C H 3. Carbon 3 is bonded to C H 2 C H 2 O H. This reacts with P C C in C H 2 C L 2 to give the product. Draw the product.

Answer:

its b

Explanation:

just did the test on A P E X

If the isotope models are accurate, One shows 8 neutrons, and one shows 9. Therefore, the correct option is option B.

A chemical element's isotope is one of more than one species of atoms that share the same atomic number, spot on the periodic table, and almost identical chemical activity, but differ in atomic mass and physical characteristics. There are a number of isotopes for each chemical element.

The first step in identifying and labelling an atom is to count the protons within its nucleus. Usually, this nuclear number is denoted by the letter Z. The fact that all atoms possessing the same number of electrons have essentially equal chemical characteristics lends the atomic number its enormous significance. If the isotope models are accurate, One shows 8 neutrons, and one shows 9.

Therefore, the correct option is option B. If the isotope models are accurate, One shows 8 neutrons, and one shows 9.

To know more about isotope, here:

https://brainly.com/question/11680817

#SPJ5

Answer:

0.77 g

Explanation:

Step 1: Write the balanced equation

AgNO₃(aq) + NaCl(aq) → AgCl(s) + NaNO₃(aq)

Step 2: Calculate the moles corresponding to 0.91 g of AgNO₃

The molar mass of AgNO₃ is 169.87 g/mol.

0.91 g × 1 mol/169.87 g = 5.4 × 10⁻³ mol

Step 3: Calculate the moles of AgCl produced from 5.4 × 10⁻³ moles of AgNO₃

The molar ratio of AgNO₃ to AgCl is 1:1. The moles of AgCl produced are 1/1 × 5.4 × 10⁻³ mol = 5.4 × 10⁻³ mol.

Step 4: Calculate the mass corresponding to 5.4 × 10⁻³ moles of AgCl

The molar mass of AgCl is 143.32 g/mol.

5.4 × 10⁻³ mol × 143.32 g/mol = 0.77 g

Answer:

these elements do not have the same masses.

Answer:

20000 Mg

Explanation:

Answer:

B. physical property is the answer

Answer:

awdaef

Explanation:

Answer:

ruthless, my style as a juvenile

ran with a gang, slanged in the meanwhile

Explanation:

Answer:

Halogens

Explanation:

they they are never found free in nature.

Answer:

Coron, Palawan, El Nido, Palawan, Cebu, Boracay, Siargao.

Explanation:

I hope this helps.

coron,palawan,El nidu, Cebu and boracay are 5 island in Philippines.....

Answer:

The correct answer is - the number of moles of solute per liter of solution.

Explanation:

The molar concentration is also known as molarity which is the amount of concentration of a solute is in a chemical solution is the number of moles of solute per unit volume of solution. It is represented as M and can be calculated by:

M = n/v

Where n is the number of moles of the solute and,

v is the volume of solution (in liters normally)

It is worldwide used measurment for the concentration.

Answer:

Acidity

Explanation:

Answer:

1,2 di methyl 5 ene tri chloro hexane

Answer:

Temperature = 0.605°C

Total enthalpy at 300kpa = 545.2 kJ

Total enthalpy at 600kpa = 846.45 kJ.

Explanation:

Checking the table for 134a pressure table. It is given that the specific volume of saturated liquid and the specific volume of the saturated vapor of 280kpa is 0.0007699 m^3/kg and 0.072352 m^3/kg respectively.

Also, the specific volume of saturated liquid and the specific volume of the saturated vapor of 320kpa is 0.0007772 m^3/kg and 0.063604 m^3/kg respectively.

The first thing to do is to determine the value for the specific volume of saturated liquid.

At 300 kpa, the specific volume of saturated liquid,n is given below as;

300 - 280/ 320 - 280 = (n - 0.0007699)/ 0.0007772 - 0.0007699.

Therefore, n = specific volume of saturated liquid = 0.0007735 m^3/kg.

300 - 280/ 320 - 280 = n - 0.072352/ (0.063604 - 0.072352).

n = 0.0679 m^3/kg.

The second thing to do is to determine the value of the specific volume.

Specific volume = 14 × 10^-3/ 10 = 0.0014 m^3/kg.

Determine the enthalpy of the mixture,b(I). This is given below as;

300 - 280/ 320 - 280 = b(I) - 199.54/ (196.7 - 199.54).

b(I) = 198.125 kJ/Kg.

Hence, b = [ 300 - 280/ 320 - 280 = j - 50.18 / 55.16 - 50.18] + [ ( 0.0014 - 0.00077735) / 0.067978 - 0.00077735] × 198.125.

b = 54.517 KJ/Kg.

Total enthalpy = 10 × 54.517 = 545.17 kJ.

Temperature can be Determine as below;

300 - 280/ 320 - 280 = T + 1.25 / 2.46 - 1.25.

Temperature = 0.605°C.

Hence, at 600kpa, the total enthalpy = [81.51 + ( 0.0014 - 0.0008199/ 0.034295 - 0.0008199) × 180.90] × 10

Total enthalpy at 600kpa = 846.45 kJ.

Answer:

option A iis the right answer

Answer:

2,795 F

Explanation:

Answer:

92.8%

Explanation:

Step 1: Given data

Step 2: Calculate the total mass of the bullet

The total mass of the bullet is equal to the sum of the masses of the elements that form it.

m = mPb + mSn + mSb = 11.6 g + 0.5 g + 0.4 g = 12.5 g

Step 3: Calculate the mass percentage of Pb in the bullet

We will use the following expression.

%Pb = mPb / m × 100%

%Pb = 11.6 g / 12.5 g × 100% = 92.8%

Answer:

ions are deflected and the lighter the ions the more the deflection.

Placing magnetic field in the path of the ions cause them to move in a curved path.

Explanation:

This question is all about the way in which mass spectroscopy works. Mass spectroscopy Is one of the techniques in spectroscopy which is used in the identification of chemical compounds.

Mass spectroscopy works based on the principle of ionization. For a mass spectroscopy to start ionization must first occur that is to say this is the first step in the identification of compound in mass spectroscopy.

The following steps are involve in mass spectroscopy;

=> Ionization: the molecules of the sample are first ionized. The ions formed here are positive ions.

=> Acceleration: the ions in step one are accelerated.

=> Deflection: the smaller ions get deflected more than the bigger ions. The magnetic field is used in the deflection of this ions.

=> Detection: the ions are then detected.

Therefore, to answer the question, the ions are deflected and the lighter the ions the more the deflection.

Placing magnetic field in the path of the ions cause them to move in a curved path.

Answer:

the steady-state concentration of TCE in the treated water leaving the reactor is 5.88 mg/L  

Explanation:

Given that;

Tank volume v = 3250 liters

wastewater flows into the tank Q = 200 L/min

TCE concentration Co= 25 mg/L

reactor decays TCE at a reaction rate K = 0.20 min-1

mass balance

we know that;

Accumulation = inflow - outflow ± generation

⇒dc/dt = QCo - Qc ± rc.V

now at a steady state; dc/dt = 0

so

0 = QCo - Qc + rcV

where rc = -kc

0 = QCo - Qc - kcV

Qc + kcV = QCo

c(Q + kV) = QCo  

c = QCo / (Q + kV)

so we substitute

c = (200 × 25) / (200 + (0.2×3250))

c = 5000 / 850

c = 5.88 mg/L      

Therefore,  the steady-state concentration of TCE in the treated water leaving the reactor is 5.88 mg/L  

Answer:

Think 12 units

Explanation:

Because it represents the hands of the clock

Answer:5.3 grams AgNO3

Explanation:

To solve your problem, take a look at the definition of molality (m):

moles of solute/kg of solvent

You are given the grams of solvent (water) to find the grams of silver nitrate.

First, convert 250 grams to kg:

250 g * 1 kg / 1000g = 0.250 kg

Now that you have the kg of solvent, you can solve for the moles of solute:

kg of solvent * molality = moles of solute

0.250 kg * 0.125 m = 0.03125 mol AgNO3

You can convert the number of moles to grams using the molar mass of AgNO3, which is 169.872 g/mol:

moles of solute * molar mass of solute = grams of solute

0.03125 mol AgNO3 * 169.872 g/mol = 5.3085 g

Because your question provides two significant digits, you must round this number to get the final answer:

5.3 grams AgNO3

I hope this helps!

A (they are experimentally determined exponents)

Answer:

Explanation:

Slate is a fine-grained, foliated metamorphic rock that is created by the alteration of shale or mudstone by low-grade regional metamorphism. It is popular for a wide variety of uses such as roofing, flooring, and flagging because of its durability and attractive appearance.

Answer:

Deep within the Earth's crust rocks can be put under huge pressures and temperatures are very high. These conditions can cause the minerals in the rock to change. This process is called metamorphism. Limestone can change into marble, shale and mudstones into slate, and igneous rocks like granite can turn into gneiss.

Explanation:

Slate is a fine-grained, foliated metamorphic rock that is created by the alteration of shale or mudstone by low-grade regional metamorphism. It is popular for a wide variety of uses such as roofing, flooring, and flagging because of its durability and attractive appearance.

4.7 × 10²⁴ atoms Li

Math

Pre-Algebra

Order of Operations: BPEMDAS

Chemistry

Atomic Structure

Stoichiometry

Step 1: Define

7.8 mol Li

Step 2: Identify Conversions

Avogadro's Number

Step 3: Convert

Step 4: Check

We are told to round to 2 sig figs. Follow sig fig rules and round.

4.69716 × 10²⁴ atoms Li ≈ 4.7 × 10²⁴ atoms Li

Answer:

2 O atoms

hope it helps....

Answer:

2O is the correct answer

Answer:

A. It increase the concentration of OH in solutions.

Explanation:

Bases are substances that react with and neutralise acids, producing water. When dissolved, bases release hydroxide ions, OH-(aq) into solution.

When a base dissolves, it increases the concentration of OH⁻ ions in the solution. Therefore, option A is correct.

An acid can be described as a substance that is capable of donating a hydrogen ion to another substance.  A base can be described as a molecule or ion that is able to have a hydrogen ion from an acid.

Acidic materials are commonly identified by sour taste. An acid can be considered commonly a molecule that can donate an H⁺ ion and can be energetically favorable after a loss of H⁺ ion. Acids increase the concentration of H⁺ ions in solution.

Bases are described by a bitter taste and a slippery nature. A base or alkali increases the concentration of OH⁻ ions in the solution. When bases react with acids, they give salts and water as products.

The pH range on the pH scale of the acids lies between 0 to 7 and the pH range of the bases lies between 7 to 14.

Learn more about acids and bases, here:

brainly.com/question/3941445

#SPJ2

Answer:

[tex]V=5.2 mL=0.052L[/tex]

Explanation:

Hello!

In this case, since the chemical reaction between silver nitrate and sodium chloride is:

[tex]AgNO_3(aq)+NaCl(aq)\rightarrow AgCl(s)+NaNO_3(aq)[/tex]

We can see there is a 1:1 mole ratio between each solution; thus, we first compute the moles of each reactant considering their molar masses:

[tex]n_{AgNO_3}=14.77g*\frac{1mol}{169.87g}=0.087molAgNO_3\\\\ n_{NaCl}=0.2631g*\frac{1mol}{58.44}=0.0045molNaCl[/tex]

Now, since the concentration of the silver chloride solution is 0.087 M, we may assume that the concentration of the NaCl solution is the same, so we can compute the volume as shown below:

[tex]V=\frac{n_{NaCl}}{M}=\frac{0.0045mol}{0.087mol/L}\\\\V=0.052L[/tex]

Or:

[tex]V=5.2 mL[/tex]

Best regards!

The volume of solution needed to react with 0.2631 g of NaCl  is 0.052 L.

Volume of the solution will be calculated by using the below formula:

M = n/V, where

M = concentration in terms of molarity

n = no. of moles

V = volume

Given chemical reaction is:

AgNO₃(aq) + NaCl(aq) → AgCl(s) + NaNO₃(aq)

First we calculate the moles of given reactants by using the formula:

n = W/M , where

W = given mass

M = molar mass

Moles of AgNO₃ = 14.77g / 169.87g/mole = 0.087 mole

Moles of NaCl = 0.2631g / 58.44g/mole = 0.0045 mole

Concentration of AgNO₃ = 0.087 mole / 1L = 0.087M

From the stoichiometry of the reaction it is clear that mole ration of AgNO₃ & NaCl is 1:1. So, we take the concentration of NaCl is equal to the concentration of AgNO₃ and calculate the volume by using the above formula as:

Volume of NaCl = 0.0045mole / 0.087M = 0.052 L

Hence, 0.052 L is the required volume of NaCl.

To know more about moles, visit the below link:

https://brainly.com/question/17199947