You can download answer here
shorturl.at/ipxUY
What is the impulse (change in momentum) from a 2N force acting on an object for 2 seconds?
Answer:
Impulse = 4Ns
Explanation:
Given the following data;
Force = 2N
Time = 2 seconds
To find the impulse experienced by the object;
Impulse = force * time
Impulse = 2*2
Impulse = 4Ns
Therefore, the impulse experienced by the object is 4 Newton-seconds.
To increase an impulse:
A. increase the change in momentum.
B. decrease the change in velocity.
C. increase the distance.
D. decrease the mass.
Acceleration due to gravity is stated as a constant which is given 9.8 m/s2. Many scientists have planned and design experiments to investigate if this value is true or false, and most of the results have concluded that the values of acceleration due to gravity ranges from 9.8 m/s2 to 10 m/s2.
PLEASE HELP!!
16. Carol views a specimen under the microscope and notices that it has no nucleus. What
must she be looking at?
A. Animal cell
B. Plant cell
C. Bacteria
D. Protist
Answer:
C. Bacteria
Explanation:
Bacteria and archaea are the two domains which consist of organisms with prokaryotic cells. Prokaryotic cells are cells without nuclei or membrane-bound organelles.
A car of mass 800 kg goes round a corner of radius 65 m at a
speed of 10 m/s
b) Suggest how this force is likely to be obtained.
Answer:
Centrifugal force = 1230.77 Newton.
Explanation:
The force associated with the car is generally referred to as centrifugal force and it can be calculated using the formula;
Centrifugal force = mv²/r
Given the following data;
Mass = 800kg
Radius = 65m
Velocity = 10m/s
To find the force;
Centrifugal force = (800*10²)/65
Centrifugal force = (800*100)/65
Centrifugal force = 80000/65
Centrifugal force = 1230.77 Newton.
The speed of the 2 kg cart after 5 seconds is ? cm/s.
A thin beam of light of wavelength 625 nm goes through a thin slit and falls on a screen 3.00 m past the slit. You observe that the first completely dark fringes occur on the screen at distances of ±8.24 mm from the central bright fringe, and that the central bright fringe has an intensity of 2.00 W/m² at its center. What is the intensity of the light at a point on the screen that is one-quarter of the away from the central bright fringe to the first dark fringe?
Answer:
I = 1.62 w/m^2
Explanation:
wavelength = 625 nm
position of screen = 3.00 m past the slit
Determine the intensity of the light
I = [tex]I_{0} ( sin\frac{\beta }{2 } /\frac{\beta }{2} )^2[/tex]
β = 2π*Dsin∅ / л
[tex]I_{0}[/tex] = 2
Attached below is the remaining part of the solution
A projectile is fored vertically upward with an initial velocity of 190 m/s. Find the maximum height of the projectile.
Answer:
3683.67 m
Explanation:
Formula for maximum height of projectile is given by the equation;
h = u²/2g
Where u is initial velocity and g is acceleration due to gravity
We are given u = 190 m/s
Thus;
h = 190²/9.8
h = 36100/9.8
h = 3683.67 m
Which statement is the best interpretation of the ray diagram shown below?
A. A concave lens forming a larger, virtual image
B. A concave lens forming a larger, real image
C. A concave mirror forming a larger, virtual image
O D. A concave mirror forming a larger, real image
Answer:
a concave lens forms a smaller, real image. { a p e x :)) }
Explanation:
hey, friend! this is the answer, but make sure that, next time, you include the diagram to make it easier for us to help you, okay?
A concave lens forming a larger real or virtual image and Concave mirrors form both real and virtual images. therefore all statements are correct. Therefore these can be interpreted by using Ray diagram.
What is Ray diagram ?A ray diagram is a diagram that shows path taken by light in order to see a point on the image of an object. Ray diagram uses lines with arrows to show reflected and incident ray.
A concave lens is a lens that diverges a straight light beam from the source to a diminished, upright, virtual image. It can form both real and virtual images. concave lens has curve on both side. The lens having only one side plane and other is curved inside, the les is called as planoconcave lens.
Concave mirror can form both virtual and real image that depends on the distance between the mirror and object. We get virtual and magnified image When the object is placed very close to the mirror. when distance between the object and mirror is increased, image gets diminished and real.
Both concave lens and mirror form both real and virtual images that's depend on the distance.
Hence all statements are correct.
To know more about ray diagram click :
https://brainly.com/question/12013737
#SPJ7.
A long board is free to slide on a sheet of frictionless ice. As shown in the top view in the diagram, a skater skates to the board and hops onto one end, causing the board to slide and rotate. In this situation, which of the following occurs? Select two answers.
Answer:
A) rational kinetic energy is conserved
For the scenario painted below Rational kinetic energy is conserved
Option A is correct
What is Rational kinetic energy?Kinetic energy is simply defined as the energy that an item or particle has as a result of its movement.
In conclusion, For A longboard is free to slide on a sheet of frictionless ice. and a skater skates to the board and hops onto one end, causing the board to slide and rotate. In this situation Rational kinetic energy is conserved
Read more about Kinetic energy
https://brainly.com/question/999862
What would happen if you didn't have chemical energy in your body? Choose the best answer.
A You wouldn't be able to think.
B You wouldn't be able to move.
C You wouldn't be able to sleep.
D You wouldn't be able to sit.
ill give a thanks
Answer:B
Explanation:
Because chemical energy fuels your body with energy so without it u wont have enough energy to move.
580 nm light shines on a double slit
with d = 0.000125 m. What is the
angle of the third dark interference
minimum (m = 3)?
(Remember, nano means 10-9.)
(Unit = deg)
Explanation:
Given that,
The wavelength of light = 580 nm
Slit separation, d = 0.000125 m
We need to find the angle of the third dark interference. For the dark fringe,
[tex]d\sin\theta=(m+\dfrac{1}{2})\lambda[/tex]
Put m = 3 and other values also.
[tex]d\sin\theta=(3+\dfrac{1}{2})\lambda\\\\d\sin\theta=\dfrac{7\lambda}{2}\\\\\sin\theta=\dfrac{7\lambda}{2d}\\\\\theta=\sin^{-1}(\dfrac{7\lambda}{2d})\\\\\theta=\sin^{-1}(\dfrac{7\times 580\times 10^{-9}}{2\times 0.000125 })\\\\\theta=0.93^\circ}[/tex]
So, the angle is 0.93°.
Answer: 0.665 deg
Explanation:
m=3
lambda= 580
d (converted to nanometers)= 125000
Using the equation of angle=arcsine of m-1/2 times lambda divided by d, filled in it would be arcsine of 3-1/2 times 580 over 125000.
A student wants to design an investigation to determine if an object contains potential energy. What are some questions the student could ask to determine if the object contains potential energy?
Does the object have kinetic energy?
Does the object move when it is released from a rest position?
Does work have to be done to hold the object in place?
Does a force act on the object?
Answer:
does work have to be done to hold the object in place
Answer:
Does the object move when it is released from a rest position? and Does a force act on the object?
Explanation:
i had the same quiz today and the other 2 are wrong
HELP DUE IN 3 MINUTESSSSS
Answer:
roots
Explanation:
Radio waves travel at the speed of light. Marsha listen to radio station at 91.3 mHz, which is a frequency of 9.13*10^ 7 H2 What is the wavelength of this radio signal in a vacuum?
Answer:
3.29 meters
Explanation:
c = λ f
c = speed of light = 3 * 10^8 m/s
λ = wavelength
f = frequency
3 * 10^8 m/s = λ * (9.13 * 10^7 1/s)
λ = (3 * 10^8 m/s) / (9.13 * 10^7 1/s)
λ = 3.29 m
1) A plane whose airspeed is 220 km/h heads due
north. It suddenly encounters a 150 km/h cross wind
blowing due east. What is the resulting velocity of
the plane with respect to the ground?
Answer:
=(220^2 +150^2)
/
put this on a square root
for you to get 266.2705391
round it to a whole number =266km/h
Explanation:
p
How would we find bond length?
Someone please help I’m so confused
Explanation:
the switch and the battery
Una niña juega a saltar con la cuerda, realizando 40 saltos en un minuto. ¿Cuál de los siguientes conceptos se asocia de mejor manera con lo descrito en la situación?
Answer:
he angular velocity w = 4.19 rad / s
Explanation:
The girl is synchronized with the movement of the rope, therefore we can describe the movement of the girl with the angular velocity
w = θ/t
if we fear 40 jumps and each one is a revolution
θ = 40 2pi = 80π radiation
t = 1 min = 60 s
w = 80π / 60
w = 4.19 rad / s
this must be the same angular velocity of the rope
What process is used to make food safer for consumption by killing bacteria within the food ? A. freezing B. fermentation C.antibiotic treatment D. pasteurization
What is the coefficient for Magnesium Chloride?
Answer:
Magnesium Chloride =MgCl 2
Explanation:
Hope I helped✌
A
is done by lifting the ball without prior swing of the leg.
A. Dodge
B. Kick
C. Scoop
D. Remove up
I’ll give brainless
you can swing your leg so it can't be kick, and remove up doesn't make sense and dodging it won't get you anywhere, so scooping it
In the following graph, what is the slope?
Answer:
to find the slope you need to find the change in distance then you divide by the corresponding change in time
eg
( 4-2) ÷ (2-1)
= 2m/s
Please Help ASAP!!!
What/Where is the direction of wind during launch of a paper aeroplane? (Bernoulli's Principle)
Answer:
The Forces of Flight
At any given time, there are four forces acting upon an aircraft.
These forces are lift, weight (or gravity), drag and thrust. Lift is
the key aerodynamic force that keeps objects in the air. It is the
force that opposes weight; thus, lift helps to keep an aircraft in
the air. Weight is the force that works vertically by pulling all
objects, including aircraft, toward the center of the Earth. In order
to fly an aircraft, something (lift) needs to press it in the opposite
direction of gravity. The weight of an object controls how strong
the pressure (lift) will need to be. Lift is that pressure. Drag is a
mechanical force generated by the interaction and contract of a
solid body, such as an airplane, with a fluid (liquid or gas). Finally,
the thrust is the force that is generated by the engines of an
aircraft in order for the aircraft to move forward.
Explanation:
Please help me In this question
Answer:
50 N
Explanation:
We are given;
Force on larger piston; F2 = 5000 N
Ratio of diameter of smaller piston to larger piston = 1:10
Now, formula for force on smaller piston which we will denote with F1 is gotten from;
F1 = F2 × A1/A2
Now, A1 = π(d1)²/2
A2 = π(d2)²/2
Thus:
F1 = F2 × (π(d1)²/2)/(π(d2)²/2)
This gives;
F1 = F2 × (d1/d2)²
Plugging in the relevant values;
F1 = 5000 × (1/10)²
F1 = 50 N
what is the speed of the pulley A if pully D is moving at a speed of 8 km/h
Answer:
hey I know the answer for this
Explanation:
it will be reduce the speed of A
the answer is 7.
this is the exact answer.
if you don't like this answer means pls comment me
Why does eating less meat conserve more water than just eating plants?
Answer:
Studies show that eating fewer animal-based products could reduce water use since animal production uses more water than crops do. In addition, reducing the amount of food that's lost or wasted at various points in the food supply chain could feed about 1 billion extra people while simultaneously reducing water use.
Why concave lens is called diverging lens
When a parallel beam of light passes through a convex lens, the rays become farther from one another when the come out. This process of rays is called ''to diverge''. The concave lens makes rays of light diverge, so it is called diverging lens.
When a wool cloth is rubbed on the surface of a balloon, it tends to give away electrons causing the surface of the balloon to become :
positively charged
negativity charged
neutrally charged
Answer:
It is negativity charged
Answer:
positively charged
Explanation:
a wool has neutral charges hence when rubbed against a balloon it will generate positive charges
Explain how a current is induced in the wire?
Answer:
If a coil of wire is placed in a changing magnetic field, a current will be induced in the wire. This current flows because something is producing an electric field that forces the charges around the wire. (It cannot be the magnetic force since the charges are not initially moving). ... that determines the induced current.