Explanation:
number of moles = number of particle/ 6.02X10^23
= 12.044 X 10^24/6.02×10^23
=20.0066 moles so round it up to 3 S.F
So
=20.0moles
Gas particles that are at low temperature and high pressure and are close to changing phases are considered:
a)Real Gases
b)Ideal Gases
c)Both Ideal and Real Gases
2Cr^3 + 3Zn(s) -> 2Cr(s) + 3Zn^2 + (aq) which reactant is reduced and which is oxidicided
Answer:
Cr is oxidised
and
Zn is reduced
[ Reduced reactant ] :
Cr^( + 3 ) + 3 e^( - 1 ) ===》 Cr^( 0 )
_____________________________
[ Oxidicided reactant ] :
Zn^(0) ===》Zn^( + 2 ) + 2 e^( - 1 )
the tissue which continually forms new cells in plants
Answer:
Meristematic Tissues. Tissues where cells are constantly dividing are called meristems or meristematic tissues. These regions produce new cells.
Explanation:
thank me later
The interaction of the skeletal and muscular systems to create movement and locomotion is regulated by which organ system?
Answer:
The muscoloskeletal system
Explanation:
The musculoskeletal system is made up of the body's bones (the skeleton), muscles, cartilage, tendons, ligaments, joints, and other connective tissue that supports and binds tissues and organs together. Its primary functions include supporting the body, allowing motion, and protecting vital organs.
Does the excess reactant get used up completely in a reaction??
Answer:
In a chemical reaction, reactants that are not used up when the reaction is finished are called excess reagents. The reagent that is completely used up or reacted is called the limiting reagent, because its quantity limits the amount of products formed.
Explanation:
Another term for natural radioactive decay into another element is
Answer:
The process of unstable (or radioactive) atoms becomes stable by emitting radiation. This event over time is called radioactive decay. Alpha decay results in the loss of two protons and two neutrons from the nucleus
Answer:
radioactive disintegration
Explanation:
How many grams of LiF are needed to make 87 g LiF solution into a
34.5% solution?
solution?
answer options:
30 g LIF
0.01 g LIF
45.8 g LIF
0.02 g LIF
Answer: 30 g LiF
Explanation:
Please help me I will give brainliest to the first correct answer
Answer:
OPTIC B) HEPT-HOPE IT IS HELPFUL
PLEASE PLEASE HELP CHEMISTRY
Sulfur (2.56 grams) was burned in a calorimeter with excess 02(g) . The temperature increased from 21.25C to 26.72C. The bomb had a heat capacity of 923 J/C, and the calorimeter contained 815 grams of water
Calculate the heat evolved as the sulfur burned:
Calculate the heat per mole of SO2 formed in the course of the reaction
S(s) + O2 (g) SO2 (g)
Mole ratios used for conversions come from?
what is chemical bonding?and types of chemical bonding there are?
Answer:
There are three primary types of bonding: ionic, covalent, and metallic. Ionic bonding. Definition: An ionic bond is formed when valence electrons are transferred from one atom to the other to complete the outer electron shell. Example: A typical ionically bonded material is NaCl (Salt).Explanation:
Hope it helps
#CarryOnLearning
How many formula units are there in 14.50 moles of any compound?
___X 10^___formula units
Answer:
8.73 × 10²⁴ formula units
Explanation:
To calculate the number of formula units a substance contain, we multiply the number of moles by Avagadro number (6.02 × 10²³)
number of formula units = 14.50 moles × 6.02 × 10²³
= 87.29 × 10²³
= 8.73 × 10²⁴ formula units.
When temperature drops, (for example from 20 degrees celsius to 10 degrees celsius)
a.) energy increases
b.) particles move slower
c.) particles collide more often
d.) pressure increases
Answer:
In the Celsius scale each degree is one part of 100 degrees. This is because in this scale the difference between boiling and freezing temperatures of water is 100 ° - 0 ° = 100 °, so one degree Celsius is one part of 100.
In the Farhenheit scale, each degree is one part of 180 degrees. This is because in this scale the difference between the boiling and freezing temperatures are 212 ° - 32 ° = 180°, so one degree Fahrenheti is one part of 180.
That means that 1 °C is a larger amount than 1 °C, so 20°C is a larger amount than 20°F.
Conclusion: 20 degree change represents a larger change in Celsius scale.
Explanation:
In the Celsius scale each degree is one part of 100 degrees. This is because in this scale the difference between boiling and freezing temperatures of water is 100 ° - 0 ° = 100 °, so one degree Celsius is one part of 100.
In the Farhenheit scale, each degree is one part of 180 degrees. This is because in this scale the difference between the boiling and freezing temperatures are 212 ° - 32 ° = 180°, so one degree Fahrenheti is one part of 180.
That means that 1 °C is a larger amount than 1 °C, so 20°C is a larger amount than 20°F.
Conclusion: 20 degree change represents a larger change in Celsius scale.
how many moles are in 0.14g of Nitrogen, N2?
Answer:
0.01 moles
Explanation:
14 g contains 1 mole
0.14g contains> (0.14*1)/14
= 0.01 moles
Sodium chloride is produced from its elements through a synthesis reaction. What mass of each reactant would be required to produce 22.0 mol of sodium chloride? sodium
Answer:
506.0 g sodium and 778.8 g chlorine gas
Explanation:
The elements from which sodium chloride (NaCl) is composed are sodium (Na) and chlorine (Cl). Thus, the chemical equation for the production of sodium chloride (NaCl) from sodium (Na) and chlorine gas (Cl₂) is the following:
2Na(s) + Cl₂(g) → 2NaCl(s)
According to the balanced equation, 2 moles of NaCl are produced from 2 moles of Na(s) and 1 mol of Cl₂. To produce 22.0 mol of NaCl, we need:
22.0 mol NaCl x 2 mol Na(s)/2 mol NaCl = 22.0 mol Na(s)
22.0 mol NaCl x 1 mol Cl₂/2 mol NaCl = 11.0 mol Cl₂
Now, we convert the moles of each reactant to grams with the molar mass (MM) of the compound:
MM(Na) = 23 g/mol
22.0 mol Na x 23 g/mol = 506.0 g Na(s)
MM(Cl₂) = 35.4 g/mol x 2 = 70.8 g/mol
11.0 mol Cl₂ x 70.8 g/mol = 778.8 g Cl₂
Therefore, it is required a mass of 506.0 grams of Na(s) and a mass of 778.8 grams of Cl₂ to produce 22.0 mol of NaCl.
Examine the food chain below: In this specific food chain, the _______ eats plants for food. A. caterpillar B. sunshine C. bobcat D. leaf
The chemical equation for zinc in hydrochloric acid is: Zn + HCI = ZnCl2 + H2
Does the above equation demonstrate the law of conservation of mass as it is currently written? Explain why or why not.
Answer: No it does not
Explanation:
The law of conservation of mass states that mass is neither created nor destroyed and in this equation you start with 1 molecule of Cl and 1 of H, but on the reactants side you end up with 2 of each. To make it follow the law of conservation of mass you would have to balance the equation
What is the rate of diffusion of NO gas to CO gas?
Answer:
0.97
Explanation:
Let R₁ represent the rate of diffusion of NO.
Let R₂ represent the rate of diffusion of CO.
Molar mass of NO (M₁) = 14 + 16 = 30 g/mol
Molar mass of CO (M₂) = 12 + 16 = 28 g/mol
Thus, the rate of NO to CO can be obtained as follow:
R₁ /R₂ = √(M₂/M₁)
R₁ /R₂ = √(28/30)
R₁ /R₂ = √(28/30)
R₁ /R₂ = 0.97
R₁ : R₂ = 0.97
NO : CO = 0.97
Therefore, the rate of diffusion of NO to CO is 0.97
Which equation correctly represents the dissociation of a strong acid in water?
Question 26 options:
CH3COOH ↔H++ CH3COO−
NaOH →Na++OH−
HCl →H+ +Cl−
NH3+ H2O↔ NH4++ OH−
The equation that correctly represents the dissociation of a strong acid in water is as follows: HCl → H+ + Cl−
What is acid dissociation?Acid dissociation is the process by which an acid breaks up into it's constituent ions in an aqueous solution.
Acids are known to contain hydrogen ions (H+), hence, dissociate into H+ and an anion.
A strong acid like HCl dissociates completely in an aqueous solution while a weak acid does not dissociate completely.
According to this question, hydrogen chloride (HCl) is said to dissociate into hydrogen ion (H+) and chloride (Cl-) according to the following expression:
HCl → H+ + Cl−
Learn more about acid dissociation at: https://brainly.com/question/4363472
#SPJ1
why metal in the middle of metal activity series can't be obtained by heating ors in air
Answer:
See Explanation
Explanation:
The way by which a metal is obtained from its ore is determined by the chemical reactivity of the metal.
Metals that are highly reactive are chiefly obtained by electrolysis of the metal salt. These metals are found high up in the metal activity series.
Metals that are at the middle of the series are moderately reactive and are obtained by electrolysis or by reduction since they still form ionic salts.
Metals that are far lower in the series can only be obtained by heating them in air because they are mostly unreactive.
Hence, moderately reactive metals at the middle of the series are not obtained by roasting in air.
is A tomato smells rotten a chemical
reaction
Answer:
yup
Explanation:
because chemical change took place
the reaction cant be reversible
Balance the following equation:
Cr + __02 +_Cr203
Answer:
4Cr + __302 -->_2Cr203.....
Someone please help me
Answer:reflection
Explanation:
Study the particle below carefully and answer
the questions that followed.
a)ldentify the particle.
b)Write the electronic configuration of the
particle.
c)State
i.Atomic number
ii.Mass number
iii.Proton number
iv.Electron number
d) Calculate the neutron number
e) State the valency
f)What is the valence electrons?
Answer:
b is the answer hope that helps
2. How did the Activator affect the mixture?
Answer:
Activator effects a mixture if you put to much of the activator your using into a product or thing you are using.
Explanation:
For ex.
If you poor to much activator into slime it will make the slime hard and very wet it will ruin your slime completely so you will have to do it just right but start off pouring it slowly and mix and then more if it needs more.
Which of the following is a correct statement about water? (3 points)
Hydrogen bonding causes water to be strongly cohesive.
Hydrogen bonding causes water to have a low surface tension.
Water is a universal solvent because polar and nonpolar solutes can dissolve in it.
Water is less dense as a liquid than as a solid because of changes in bond structure.
Answer:
A: Hydrogen bonding causes water to be strongly cohesive.
Explanation:
Water has a high surafce tension. Hence droplets of water
Water cannot dissolve non polar substances like oil; only polar
Water is actually less dense in solid form :)
Hydrogen bonding causes water to be strongly cohesive.
This sticking together of like substances is called cohesion. Depending on how attracted molecules of the same substance are to one another, the substance will be more or less cohesive. Hydrogen bonds cause water to be exceptionally attracted to each other. Therefore, water is very cohesive.
Cohesion
Cohesion, also called cohesive attraction or cohesive force, is the action or property of like molecules sticking together, being mutually attractive. It is an intrinsic property of a substance that is caused by the shape and structure of its molecules, which makes the distribution of surrounding electrons irregular when molecules get close to one another, creating an electrical attraction that can maintain a microscopic structure such as a water drop. In other words, cohesion allows for surface tension, creating a "solid-like" state upon which light-weight or low-density materials can be placed.
Learn more about Cohesion
https://brainly.com/question/18176896
#SPJ2
What element is produced when Mercury - 204 undergoes alpha decay?
Answer:
bismuth
Explanation:
i think if not i am so sorry
Explain the method to decrease friction?
Answer:
having a smooth or lubricated surface may help decrease friction.
Explanation:
What is diffusion? How does the motion of gas molecules explain how a gas diffuses throughout a room?
Answer:
Diffusion in gases
Diffusion is driven by differences in concentration. When chemical substances such as perfume are let loose in a room, their particles mix with the particles of air. The particles of smelly gas are free to move quickly in all directions
Explanation:
hope this helps
How much energy required to raise the temperature of lead by the same degrees.
Answer:
If a one kilogram block of lead absorbs 2,000 J of energy then the temperature rise will be larger. If 1,000 J of heat is absorbed by a 2 kg block of lead then the temperature of the block doesn't rise as much since the energy is shared between more particles.
Explanation: