(Please someone help!) Explain how you would determine the molar mass of Ca(NO3)2
Answer: 164.09 g/mol
Explanation:
what is the product 100g and 150g
Answer:
15000 g
Explanation:
We simply multiply 100 grams with 150 grams to get 1.5(10⁴) grams.
Answer:
0.015 kg2
Explanation:
One intresting note is that bleach has a lower measured pH than given based on its color. Why is that? (Hint: what is bleach used for)
It is used for cleaning and other use. Higher pH means stronger base.
how does the vapor pressure of water at 10°C compared with its vapor pressure at 50°C ?
Answer: The vapor pressure of water at 10°C will be less as compared with its vapor pressure at 50°C.
Explanation:
Vapor pressure of a liquid is defined as the pressure exerted by the vapors in equilibrium with the liquid/solution at a particular temperature.
As Kinetic energy is dependent on the absolute temperature of the gas.
[tex]K.E=\frac{3}{2}RT[/tex]
where R = gas constant
T = temperature
On increase in temperature, the kinetic energy of the molecules increase and thus more liquid molecules can escape to form vapours and thus will exert more vapor pressure.
Thus the vapor pressure of water at 10°C will be less as compared with its vapor pressure at 50°C.
While camping you light a small campfire, initiating the combustion of wood to produce heat and
light. What can you determine about this reaction?
O A. It is exothermic.
B. The bond making energy is more than 600 kJ.
OC. It is endothermic.
D. The bond breaking energy is more than 600 kJ.
Answer:
A. It is exothermic
Explanation:
Combustion is a chemical reaction in which a substance combines with oxygen present in air to produce carbon (iv) oxide and water as well release heat and light energy.Combustion is an exothermic process.
An exothermic reaction releases energy in the form of heat to the surroundings. The energy required to break bonds in the reactants is less than the energy required to form new bonds in the products in an exothermic reaction.
From the given options;
A. It is exothermic is determinable since the reaction is a combustion reaction
B. The bond making energy is more than 600 kJ is not certain because the mass of the wood being burnt is not given. Also, wood is not composed of a specific element that would be taking part in the reaction, rather it is composed of various substances.
C. It is endothermic. is wrong because combustion of wood is exothermic.
D. The bond breaking energy is more than 600 kJ is not certain because the mass of the wood being burnt is not given. Also, wood is not composed of a specific element that would be taking part in the reaction, rather is composed of many substances.
Study the following reaction: NH4+(g) + NO2⁻(g) ⟶ N2(g) + 2H2O(l) How does the rate of this reaction change when the temperature is increased? A) The rate decreases because a higher temperature means that particles move at higher speeds and there are more collisions in the system. B) The rate decreases because a higher temperature means that particles move at lower speeds and there are fewer collisions in the system. C) The rate increases because a higher temperature means that particles move at lower speeds and there are fewer collisions in the system. D) The rate increases because a higher temperature means that particles move at higher speeds and there are more collisions in the system.
Answer:
D). The rate increases because a higher temperature means that particles move at higher speeds and there are more collisions in the system.
Explanation:
The rate of the given chemical reaction would rapidly increase with an increase in temperature as the higher temperature will increase the kinetic energy possessed by the reactant molecules. This will lead to the movement of particles at a higher speed and more effective collisions will take place(as the greater proportion of molecules will have the energy required for collision). Thus, the last statement correctly justifies this description and hence, option D is the correct answer.
What are the periodic trends of ionic radii? Check all that apply. Ionic radii tend to increase down a group. Ionic radii tend to decrease across a period. Anionic radii tend to increase across a period. Cationic radii tend to decrease across a period. Ionic radii increase when switching from cations to anions in a period.
Answer:
What are the periodic trends of ionic radii? Check all that apply.
*Ionic radii tend to increase down a group.
Ionic radii tend to decrease across a period.
Anionic radii tend to increase across a period.
*Cationic radii tend to decrease across a period.
*Ionic radii increase when switching from cations to anions in a period.
Answer:
- Ionic Radii Tend To Increase Down A Group.
- Cationic Radii Tend To Decrease Across A Period.
- Ionic Radii Increase When Switching From Cations To Anions In A Period.
Explanation:
i got it correct on edge
A car travelling at 50m/s produces a force of 200N. What is the power of the engine in kilowatts(KW).
Answer:
10 kilowatts or 10,000 kw
Explanation:
Power = Force × Velocity
Given that:
Velocity of car is 50 m/s
The force is 200N
The power would be:
P = 200 × 50
P = 10,000 W
Notice that it only reaches watts because of the unit of the velocity is m/s. Standard unit to make Kw is km.
Since:
1 kw = 1000 w
10 kw = 10000 w
Credits to the person below me for correction.
Answer:
10 KW
Explanation:
The speed of the car is 50m/s.
The force of 200N is produced.
Power (W) = Velocity (m/s) × Force (N)
Power (W) = 50 × 200
Power (W) = 10000
1 Nm/s = 1 Watt
The power in Watts is 10000. The question asks for the power in kilowatts.
1 kilowatts = 1000 Watts
10000/1000 = 10 kilowatts
Philosophy ultimately seeks to discover ultimate truth
True or false
Answer:
True
Explanation:
Phislosophy does not accept something even though it is a khown fact unless it can proves it's true .
Descartes sais that in philosophy we must doubt the facts we khow , we must start from the beginning to reach the truth
Calcium (Ca) has an atomic number of 20. It can form an ion by losing 2
electrons. What would its charge be?
A. 18
B. 22
C. 2+
D. 2-
Answer:
2+
Explanation:
Apex lolz
what is the volume occupied by 4 grams of oxygen at room temperature
Answer:
volume of O2 = 3000cm³
Explanation:
no. of moles= mass of oxygen (g)/molar mass of oxygen(g/mol)
= 4/32
=0.125
volume of oxygen= no. of moles × 24000 cm³ (or 24dm³)
= 0.125 × 24000 cm³
=3000cm³ (or 3dm³)
Which of the following is NOT an indicator of a chemical
reaction?
O A. Breaking into small pieces
OB. Producing a solid
OC. Changing color
OD. Producing light
Answer:OD. Producing light
Explanation:
11. Which of the following is true about nitrogen-14 and nitrogen-16?
A.They are isotopes of the same atom.
B.They are the same except that carbon-14 has 2 extra electrons.
C.They are completely different atoms.
D.They are the exact same atom.
Answer:
The answer is option A.
They are isotopes of the same atom.
Hope this helps you
write down the new substance formed when ammonia react with hydrochloric acid
Answer: ammonium chloride
Explanation: The reaction equation among ammonia (NH3) and hydrochloric acid (HCl) is written as follows: NH3+HCl=NH4Cl. Ammonia is a susceptible base that reacts with hydrochloric acid, forming a compound referred to as ammonium chloride.
Calculate the number of grams of HNO3 which must be added to 31.5 g of H20 to prepare a 0.950 m solution.
Answer:
1.89g of HNO3
Explanation:
Data obtained from the question include:
Mass of water = 31.5 g
Molality of HNO3 = 0.950 m
Mass of HNO3 =.?
Next, we shall determine the number of mole of HNO3 in the solution.
Mass of water = 31.5 g = 31.5/1000 = 0.0315 Kg
Molality of HNO3 = 0.950 m
Number of mole of HNO3 =..?
Molality is simply defined as the mole of solute per unit kilogram of solvent (water) i.e
Molality = mole /kg of water
With the above formula, the mole of HNO3 can be obtained as follow:
Molality = mole /kg of water
0.950 = mole of HNO3 /0.0315
Cross multiply
Mole of HNO3 = 0.950 x 0.0315
Mole of HNO3 = 0.03 mole
Finally, we shall convert 0.03 mole of HNO3 to grams. This is illustrated below:
Molar mass of HNO3 = 1 + 14 + (16x3) = 63g/mol
Mole of HNO3 = 0.03 mole
Mass of HNO3 =..?
Mole = mass /molar mass
0.03 = mass of HNO3 /63
Cross multiply
Mass of HNO3 = 0.03 x 63
Mass of HNO3 = 1.89g
Therefore, 1.89g of HNO3 is needed to prepare the solution.
How to get a catalyst back at the end of a chemical reaction?
Answer:
You should get the catalyst back already.
Explanation:
A catalyst shouldn't be used up during a chemical reaction. It is used to speed up a reaction, but it shouldn't disappear/be used up by a chemical reaction.
Based on the law of Conservation of Mass, what happens to the mass of a substance in a chemical change? A: the mass is always conserved B: The mass is either created or destroyed C: the reactant always has more mass D: the product always has more mass
Answer:
A.
Explanation:
The amount of mass always stays the same, matter cannot be created nor destroyed, it can only change forms. Thus, the answer is A.
In a chemical reaction the total mass of all the substances taking part in the reaction remains the same. Also, the number of atoms in a reaction remains the same. Mass cannot be created or destroyed in a chemical reaction.
I hope this helps..
What name is given to substances in which atoms of two or more elements are chemically combined?
Answer:
Compounds
Explanation:
Substances in which atoms of two or more elements are chemically combined are called compounds.
A compound is a substance formed when two or more elements are chemically joined.
Answer:
Elements can be chemically combined into compounds, therefore, a compound consists of two or more elements combined, in definite proportions, by chemical means. Compounds may be formed by combining atoms of their constituent elements by ionic bonds or by covalent bonds.
Explanation:
Which of the following describes what happens in a chemical reaction?
O A. Molecules change from one phase to another.
B. Molecules dissolved in solution are separated again.
O c. Chemical bonds are broken, and new ones are formed.
O D. Molecules mix without rearranging atoms.
Answer:
c. Chemical bonds are broken, and new ones are formed.
Explanation:
Hope this helps. :)
In a chemical reaction, chemical bonds are broken, and new ones are formed.
What is a chemical reaction?Chemical reactions are defined as reactions which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical reaction.
There are several characteristics of chemical reactions like change in color, change in state , change in odor and change in composition . During chemical reaction there is also formation of precipitate an insoluble mass of substance or even evolution of gases.
There are three types of chemical reactions:
1) inorganic reactions
2)organic reactions
3) biochemical reactions
During chemical reactions atoms are rearranged and changes are accompanied by an energy change as new substances are formed.
Learn more about chemical reactions,here:
https://brainly.com/question/29762834
#SPJ2
select all the correct answers. Which conditions are required for nuclear fusion to begin? The gas cloud must be very dense. Gravitational attraction must stop. Atoms must be stripped of their electrons. Helium atoms must break down into hydrogen. Temperatures must exceed 14 million Kelvin.
Answer:
The gas cloud must be very dense.Temperatures must exceed 14 million Kelvin
Nuclear fusion is the process in which atomic nuclei come together to form heavier nuclei, releasing large amounts of energy in the process. The correct statements are The gas cloud must be very dense, Atoms must be stripped of their electrons, and Temperatures must exceed 14 million Kelvin.
For fusion to occur, certain conditions must be met. The gas cloud or plasma must be dense enough to allow for a sufficient number of collisions between atomic nuclei. Gravitational attraction, on the other hand, is necessary to bring the atomic nuclei close enough together for the strong nuclear force to overcome the electrostatic repulsion between positively charged nuclei.
Atoms must be stripped of their electrons because, in a plasma state, the atoms are ionized, meaning they have lost or gained electrons and exist as charged particles.
Hence, the correct statements are The gas cloud must be very dense, Atoms must be stripped of their electrons, and Temperatures must exceed 14 million Kelvin.
Learn more about nuclear fusion here:
https://brainly.com/question/14019172
#SPJ 2
CAn someone help me and give me an example of a process that you notice or use each day that obyes the law of conservation of mass and explain how this process work??? please answer I need a new example not burning fire or candle or paper different helppppppppppppppppppppppppppppppppppppppppp
Answer:
photosynthesis maybe
Explanation:
bare with me i may be wrong or i may be right it's been a while since i've been in a chem classroom. so basically during photosynthesis a plant is taking the energy from the sun, H2O, and CO2, this ends up being like 6CO2 + 6H20 + (energy), and it converts this energy to glucose (→ C6H12O6 + 6O2 ) so the energy is never used up in this process it is merely changed. i don't really know but i hope it at least helps some
Which tool was used to collect the solid product of the chemical reaction? the balance the funnel with the filter paper the Erlenmeyer flask the beaker the watch glass With this tool, the could be separated from the .
Answer:
B. The Funnel withe the filter paper.
Explanation:
The next answers is copper and aqueous solution.
The statement, that describes tool was used to collect the solid product of the chemical reaction is "the funnel with the filter paper."
What is a chemical reaction ?
A chemical reaction is a process that converts one or more compounds, known as reactants, into one or more distinct substances, known as products.
Filtration is a basic process for removing solid particles suspended in a liquid solution. Filtration is a method of separating solids from liquids or gases by employing a filter material that enables the fluid but not the solid to pass through. A funnel with filter paper can be used to gather solid product during the filtration process.
Hence the correct answer is the funnel with the filter paper.
Learn more about chemical reaction here
https://brainly.com/question/17053196
#SPJ2
Which best describes the motion of the object between 1 and 4 seconds? The object has decreasing acceleration and increasing velocity. The object has positive acceleration and eventually stops. The object has decreasing acceleration and decreasing velocity. The object has negative acceleration and eventually stops.
Answer:
D or 4
Explanation:
right on edge 2021
Answer:
d
Explanation:
Which missing item would complete this beta decay reaction?
Answer:
The answer is option A.Hope this helps you
Which of the following is a correct observation when water is added to quick lime?
A .Vigorous bubbling and a hissing sound both.
B .Slow bubbling with no sound.
C .Vigorous bubbling with evolution of heat and a hissing sound.
D. No change.
Answer:
c
Explanation:
thw observation of water that is added
Match the following.
1. A substance that produces hydrogen ions in solution; alternatively, a proton donor
2. A substance that produces hydroxide ions in solution; alternatively, a proton acceptor
a. acid
b. base
Answer:
1. Acid produces hydrogen ions in a solution.
2. Base produces hydroxide ions in a solution.
Answer:
1. A substance that produces hydrogen ions in solution; alternatively, a proton donor
Acid
2. A substance that produces hydroxide ions in solution; alternatively, a proton acceptor
Base
A. If both Assertion & Reason are true and the reason is the correct explanation of the assertion. B. If both Assertion & Reason are true but the reason is not the correct explanation of the assertion. C. If Assertion is true statement but Reason is false. D. If Assertion is false and Reason is true i Assertion: .Burning of magnesium ribbon produce whitish powder called magnesium oxide. Reason : Magnesium is generally cleaned by rubbing it on sand paper
Answer:
C. If Assertion is true statement but Reason is false.
Explanation:
The burning of magnesium in air produces magnesium oxide as shown by the equation;
2Mg(s) + O2(g) -----> 2MgO(s)
The magnesium oxide solid is recovered as a white ash. This is a typical example of an oxidation reaction which is also a combustion reaction.
The reason has nothing at all to do with the assertion hence the answer given.
Magnesium oxide is basic just like the oxides of other metals and dissolves in water to yield an alkali.
Answer:
Answer:
C. If Assertion is true statement but Reason is false.
Explanation:
The burning of magnesium in air produces magnesium oxide as shown by the equation;
2Mg(s) + O2(g) -----> 2MgO(s)
The magnesium oxide solid is recovered as a white ash. This is a typical example of an oxidation reaction which is also a combustion reaction.
The reason has nothing at all to do with the assertion hence the answer given.
Magnesium oxide is basic just like the oxides of other metals and dissolves in water to yield an alkali.
Explanation:
Anyone know how to answer this?
Answer:
i metal
ii nonmetal
iii metal
iv nonmetal
Explanation:
If you look up what the element of a heater is, you get a picture of some sort of rod. It's the heating element of the heater, and must be some type of metal to conduct electricity and warm up. Fishing rods are made of either fiberglass, graphite, or carbon fibre. These are nonmetals. In order for a lightning rod to conduct electricity and bring the lightning down to the ground, it has to be metal. You wouldn't want a metal oven mitt, as that would burn your hand.
Gold and Platinum are found in free state in nature-Give reason.
Read the passage. Oceans and seas can act as a buffer heat reservoir to regulate climates. They can absorb great quantities of heat in the summer, with very little temperature change. In the winter, oceans and seas release the heat. This is the main reason why coastal climates are milder compared to terrestrial climates. Which choice correctly explains this phenomena? A) the high freezing point of water caused by the strength of O–H bonds B) the high boiling point or water caused by hydrogen bonding C) the high heat of vaporization of water caused by the strength of O–H bonds D) the high specific heat of water caused by hydrogen bonding
Answer:
D) the high specific heat of water caused by hydrogen bonding
Explanation:
The water has a higher specific heat and is due to the bonding of H2 molecules by the water. When the bonding is broken the heat is released and water molecules can move freely. This leads to a decline in the temperatures and thus the heat is released in winters and coastal climates are considered to be milder than terrestrial climates. As the energy is released on condensation.