Answer:
2ErF3 +3Mg = 3MgF2 + 2Er
Explanation:
This is a single replacement equation where there are 2 metals. The bonds are broken and new bonds are formed again by Mg and F.
Er has a +3 charge and F has a -1 charge. You switch it around and you get ErF3. Then you add the second reactant, Mg. The product is MgF as stated, and Mg has a charge of +2 and F has -1. You switch it again and you get MgF2. Then the second product Er is there.
Now we have
ErF3+Mg=MgF2+Er
So we balance the equation because of the law of conservation of mass.
Make F equal, so we add the coefficents 2 and 3
2ErF3+Mg=3MgF2+Er
And now Mg and Er need balancing so
2ErF3+3Mg=3MgF2+2Er
Hope this helped
The element nitrogen would be expected to form covalent bond(s) in order to obey the octet rule. Use the octet rule to predict the formula of the compound that would form between nitrogen and hydrogen , if the molecule contains only one nitrogen atom and only single bonds are formed. Formula:
Answer:
The compound formula will be "NF₃". The further explanation is given below.
Explanation:
Nitrogen seems to have an electrical structure consisting of 1S², 2S² as well as 3S² and it requires three electrons to fulfill or conclude the octet. This will, therefore, form three bonds (covalent). Even though only single nitrogen has been present, that can only represent a single bond including fluorine. Therefore the methodology for something like the compound would be NF₃.So that the above would be the right answer.
For the reaction Ca(s)+Cl2(g)→CaCl2(s) calculate how many grams of the product form when 14.4 g of Ca completely reacts. Assume that there is more than enough of the other reactant.
Answer:
[tex]m_{CaCl_2}=39.96gCaCl_2[/tex]
Explanation:
Hello,
In this case, for the undergoing reaction, we can compute the grams of the formed calcium chloride by noticing the 1:1 molar ratio between calcium and it (stoichiometric coefficients) and using their molar mass of 40 g/mol and 111 g/mol by using the following stoichiometric process:
[tex]m_{CaCl_2}=14.4gCa*\frac{1molCa}{40gCa} *\frac{1molCaCl_2}{1molCa} *\frac{111gCaCl_2}{1molCaCl_2}\\ \\m_{CaCl_2}=39.96gCaCl_2[/tex]
Clearly, chlorine is not used since it is said there is enough for the reaction to go to completion.
Best regards.
Which statements correctly describe the effect of distance in determining the gravitational force and the electrical force? Check all that apply.
Answer:
The gravitational force is inversely proportional to the square of the distance..
The electrical force is inversely proportional to the square of the distance..
Explanation:
From the Newton's law of universal gravity, we understood that the force of attraction between the masses two objects is inversely proportional to the square of the distance apart. Mathematically, it is expressed as:
F = GM1M2/r²
Where:
M1 and M2 are the masses of two objects measured in kilograms (Kg).
G is the gravitational constant with a value of 6.67×10¯¹¹ Nm²/Kg²
r is the distance apart measured in metre (m).
F is the force of attraction measured in Newton (N).
From the equation:
F = GM1M2/r²
The force (F) is inversely proportional to the square of the distance (r) apart. This means that the greater the distance apart, the smaller the force of attraction and the smaller the distance apart, the greater the force of attraction between the masses of the object.
From Coulomb's Law, we understood that the force of attraction between two charged particles is inversely proportional to square of the distance. Mathematically, it expreessed as
F = Kq1q2/ r²
Where:
q1 and q2 are charges of two objects measured in coulomb (C) .
r is the distance apart measured in metre (m)
K is the electrostatic constant with a value of 9×10^9 Nm²/C²
F is the force measured in Newton (N).
From the equation:
F = Kq1q2/ r²
The force (F) is inversely proportional to the square of the distance (r) apart.. This implies that as the distance between the charged particles increase, the smaller the force of attraction between them and as the distance between the charged particles decrease, the greater the force of attraction between the two charged particles.
Answer:
3 and 6
Explanation:
What is the mass number of an atom with 24 protons anſ 30 neutrons?
Answer:
54
Explanation:
The mass number of the atom is 54
How much heat is absorbed when 52.39 H2O(l) at 100°C and 101.3 kPa is converted to steam at 100°C? (The molar heat of vaporization of water is
40.7 k/mol.)
2.09 x 1020
O 2.31% 10110
O 1.18 x 102 103
O 1.11% 1021)
Assuming the same temperature and pressure for each gas, how many milliliters of carbon dioxide are produced from 16.0 mL of CO?
2 CO(g) + O2(g)
2 CO2(g)
Express your answer with the appropriate units.
Answer:
[tex]V_{CO_2}=16.0mL[/tex]
Explanation:
Hello,
In this case, given that the same temperature and pressure is given for all the gases, we can notice that 16.0 mL are related with two moles of carbon monoxide by means of the Avogadro's law which allows us to understand the volume-moles relationship as a directly proportional relationship. In such a way, since in the chemical reaction:
[tex]2CO(g)+O_2(g)\rightarrow 2CO_2(g)[/tex]
We notice two moles of carbon monoxide yield two moles of carbon dioxide, therefore we have the relationship:
[tex]n_{CO}V_{CO}=n_{CO_2}V_{CO_2}[/tex]
Thus, solving for the yielded volume of carbon dioxide we obtain:
[tex]V_{CO_2}=\frac{n_{CO}V_{CO}}{n_{CO_2}} =\frac{2mol*16.0mL}{2mol}\\ \\V_{CO_2}=16.0mL[/tex]
Best regards.
Dinitrophenol (DNP) is a drug that has the ability to separate the flow of electrons through the
electron transport and ATP proton pumps, used during the electron transport system. This
means that the energy from electron transfer cannot be used for ATP synthesis. Assuming
your bacteria has consumed DNP, how many ATPs would they produce form the complete,
aerobic oxidation of one glucose molecule?
Answer:
Four
Explanation:
Glycolysis ⟶ 2ATP
TCA cycle ⟶ 2ATP
ETC ⟶ 34ATP
Total = 38ATP
DNP disrupts the electron transport chain, so the bacteria will produce only four molecules of ATP from one of glucose.
g The "Coulomb barrier" is defined to be the electric potential energy of a system of two nuclei when their surfaces barely touch. The probability of a nuclear reaction greatly increases if the energy of the system is above this barrier. What is the Coloumb barrier (in MeV) for the absorption of an alpha particle by a lead-208 nucleus
Answer:
The Coulomb Barrier U is 25.91 MeV
Explanation:
Given that:
Atomic Mass of lead nucleus A = 208
atomic mass of an alpha particle A = 4
Radius of an alpha particle [tex]R_\alpha = R_o A^{^{\dfrac{1}{3}}[/tex]
where;
[tex]R_\alpha = 1.2 \times 10 ^{-15} \ m[/tex]
[tex]R_\alpha = R_o A^{^{\dfrac{1}{3}}[/tex]
[tex]R_\alpha = 1.2 \times 10 ^{-15} \ m \times (4) ^{^{\dfrac{1}{3}}[/tex]
[tex]R_\alpha = 1.905 \times 10^{-15} \ m[/tex]
Radius of the Gold nucleus
[tex]R_{Au}= R_o A^{^{\dfrac{1}{3}}[/tex]
[tex]R_{Au}= 1.2 \times 10 ^{-15} \ m \times (208) ^{^{\dfrac{1}{3}}[/tex]
[tex]R_{Au} = 7.11 \times 10^{-15} \ m[/tex]
[tex]R = R_\alpha + R_{Au}[/tex]
[tex]R = 1.905 \times 10^{-15} \ m + 7.11 \times 10^{-15} \ m[/tex]
[tex]R = 9.105 \times 10 ^{-15} \ m[/tex]
The electric potential energy of the Coulomb barrier [tex]U = \dfrac{Ke \ q_{\alpha} q_{Au}}{R}[/tex]
[tex]U = \dfrac{8.99 \times 10^9 \ N.m \ ^2/C ^2 \ \times 2 ( 82) \times \(1.60 \times 10^{-19} C \ \ e } {9.105 \times 10^{-15} \ m }[/tex]
U = 25908577.7eV
U = 25.908577 × 10⁶ eV
U = 25.91 MeV
The Coulomb Barrier U is 25.91 MeV
➔ Which compound has both ionic and covalent bonds? A. Ammonium chloride B. Carbon dioxide C. Ethyl ethanoate D. Sodium chloride
Answer:
Choice A. Ammonium chloride.
Explanation:
Consider the bonds in each of the four compounds.
Ammonium chlorideAmmonium chloride [tex]\rm NH_4Cl[/tex] is an ionic compound. Each
The [tex]\rm {NH_4}^{+}[/tex] and [tex]\rm Cl^{-}[/tex] ions in [tex]\rm NH_4Cl[/tex] are connected with ionic bonds.
What make [tex]\rm NH_4Cl[/tex] special is that its cation [tex]\rm {NH_4}^{+}[/tex] is polyatomic. In other words, each [tex]\rm {NH_4}^{+}[/tex] ion contains more than one atoms. These atoms (one [tex]\rm N[/tex] atom and four [tex]\rm H[/tex] atoms) are connected with covalent bonds. Therefore, [tex]\rm NH_4Cl[/tex] has both ionic and covalent bonds.
Carbon dioxideCarbon dioxide [tex]\rm CO_2[/tex] is a covalent compound. Each [tex]\rm CO_2[/tex] molecule contains two [tex]\rm C=O[/tex] double bonds in total. [tex]\rm CO_2[/tex] molecules have no ionic bond.
Ethyl ethanoateThe name "ethyl ethanoate" might sound like the name of a salt (think about sodium ethanoate.) However, in reality, ethyl ethanoate [tex]\rm CH_3COOCH_2CH3[/tex] is an ester. The "ethyl" here refers to the [tex]\rm -OCH_2CH3[/tex] part, originating from ethanol. On the other hand, "ethanoate" refers to the [tex]\rm CH_3C(O)-[/tex] part, which can be obtained from ethanoic acid.
These two parts are connected with a covalent [tex]\rm C-O[/tex] single bond. (The [tex]\rm C[/tex] in ethanoic acid is connected to the [tex]\rm O[/tex] in ethanol.) As a result, there's no ionic bond in ethyl ethanoate, either.
Sodium chlorideSodium chloride [tex]\rm NaCl[/tex] is an ionic compound. Both the [tex]\rm Na^{+}[/tex] ion and the [tex]\rm Cl^{-}[/tex] are monoatomic. While the [tex]\rm Na^{+}[/tex] and [tex]\rm Cl^{-}[/tex] in sodium chloride are connected with ionic bonds, neither [tex]\rm Na^{+}[/tex] nor [tex]\rm Cl^{-}[/tex] contains covalent bond.
Potassium, a metal with one electron in the outermost shell, will react with how many chlorine atoms
Answer:
7 chlorine atoms
Explanation:
K=2.8.8.1
Cl=2.8.7
pottasium will give chlorine its I valence electron to form ions as follows
K=(2.8.8)+
Cl=(2.8.8)-
It will react with 1 chlorine atom.
Whilst one atom loses an electron to every other atom it results in the formation of?
An ionic bond is shaped by using the whole transfer of some electrons from one atom to every other. The atom losing one or more electrons becomes a cation—an undoubtedly charged ion. The atom gaining one or more electrons will become an anion—a negatively charged ion.
What number of bonds can chlorine form?In those compounds carbon, nitrogen, oxygen, and chlorine atoms have four, three, and one bonds, respectively. The hydrogen atom and the halogen atoms form the most effective covalent bond to different atoms in maximum stable neutral compounds.
Learn more about chlorine atom here: https://brainly.com/question/25310059
#SPJ2
Sort the resources into the correct categories.
are replaced by natural processes
Renewable Resources
Nonrenewable Resources
cannot be replaced in a short time
are used more quickly than replaced
have fixed amounts
are considered unlimited
are replaced faster than used
Intro
✓ Done
Answer:
Renewable Resources: are considered unlimited, are replaced faster than used.
Nonrenewable Resources: are used more quickly than replaced, have fixed amounts, cannot be replaced in a short time.
Explanation:
Renewable resources are natural resources that are able to naturally regenerate themselves, hence, they are considered to be unlimited. They are usually replaced faster than they are used because they have a short regeneration time. A good example is the solar energy.
Nonrenewable resources are those natural resources that cannot naturally regenerate and when they do, it takes a very long time (usually millions of years). They are therefore used at a much faster rate than they are being replaced and their natural deposits are more or less fixed due to the long regeneration time. A good example is the crude oil deposit.
Hence:
Renewable Resources: are considered unlimited, are replaced faster than used.
Nonrenewable Resources: are used more quickly than replaced, have fixed amounts, cannot be replaced in a short time.
Answer: !
Explanation:
2. Write the chemical equations for the neutralization reactions that occurred when HCL and NaOH were added to the buffer solution.
Answer:
HCI(aq)+CH3COONa(s) ----> CH3COOH(aq)+NaCl(s)
NaOH(aq)+CH3COOH(aq) ----> CH3COONa(s)+H2O(l)
Explanation:
A buffer is a solution that resists changes in acidity or alkalinity. A buffer is able to neutralize a little amount of acid or base thereby maintaining the pH of the system at a steady value.
A buffer may be an aqueous solution of a weak acid and its conjugate base or a weak base and its conjugate acid.
The equations for the neutralizations that occurred upon addition of HCl or NaOH are;
HCI(aq)+CH3COONa(s) ----> CH3COOH(aq)+NaCl(s)
NaOH(aq)+CH3COOH(aq) ----> CH3COONa(s)+H2O(l)
give the total number of electrons , the number of valence electrons, and the identity of the element with each electronic configuration a) 1s2s22p63s23p6, b)1s22s22p63s23p64s23d7, c)1s22s22p3, d)[Kr5s24d105p2 please help solve . thank you
Explanation:
a)element=argon
number of electrons=18
it's an inert gas,thus it is fully filled
b)element=cobalt
number of electrons=27
valence electron=1
c).element=nitrogen
number of electrons=7
valence electrons=3
d)element=stanium
number of electrons=50
valence electrons=2
Paper is stable at room temperature in the presence of oxygen (O2) because it requires ____________ to start the reaction.
Answer:
Energy
Explanation:
Paper is oxidized in the presence of oxygen. This reaction however proceeds very slowly until energy is supplied to the system. This implies that the reaction is not spontaneous at room temperature. A spontaneous reaction takes place without any need for external supply of energy.
The need for supply of external energy must be as a result of the high activation energy required for the reaction to go to completion. If a chemical reaction has a high activation energy, it will require an external supply of energy in order for such reaction to occur.
How are the oxygen atoms balanced for redox equations in basic solutions
Answer: H2O and OH^- are added to balance the oxygen atoms.
Explanation:
Organic chemistry too eazy but why 90% students avoid ?
Answer:
because it covers a large area as there are more then 1 lakh compounds of organic chemistry.
If 8.23 g of magnesium chloride react completely with sodium phosphate, how many grams of magnesium phosphateare produced
Answer:
The correct answer is 7.57 grams of magnesium phosphate.
Explanation:
Based on the given question, the chemical reaction taking place is:
2Na₃PO₄ (aq) + 3MgCl₂ (aq) ⇒ Mg₃(PO₄)2 (s) + 6NaCl (aq)
From the given reaction, it is evident that two moles of sodium phosphate reacts with three moles of magnesium chloride to produce one mole of magnesium phosphate.
Based on the given information, 8.23 grams of magnesium chloride reacts completely with sodium phosphate, therefore, magnesium chloride in the given case is the limiting reagent.
In the given case, 3 moles of magnesium chloride produce 1 mole of magnesium phosphate. Therefore, 1 mole of magnesium chloride will produce 1/3 mole of magnesium phosphate.
The molecular mass of magnesium chloride is 95.21 grams per mole. So, 1 mole of magnesium chloride is equivalent to 95.21 grams of magnesium chloride.
On the other hand, the molecular mass of magnesium phosphate is 262.85 grams per mole. Therefore, 1 mole of magnesium phosphate is equal to 262.85 grams of magnesium phosphate.
As seen earlier that 1 mole of magnesium chloride = 1/3 moles of magnesium phosphate. So,
95.21 grams of magnesium chloride = 1/3 × 262.85 grams of magnesium phosphate
= 262.85 / 3 grams of magnesium phosphate
1 gram of magnesium chloride = 262.85 / 3 × 95.21 grams of magnesium phosphate
8.23 grams of magnesium chloride = 262.85 / 3 × 95.21 × 8.23 grams of magnesium phosphate
= 7.57 grams of magnesium phosphate
Hence, when 8.23 grams of magnesium chloride when reacts completely with sodium phosphate, it produces 7.57 grams of magnesium phosphate.
a. If the temperature change of the dissolution of urea from your experiment were determined much lower than the actual temperature change, What is the effect on the value of entropy calculated from the incorrect data?
Explanation:
Before proceeding, we have to first understand the relationship between temperature and entropy.
From the equation of entropy which is given as;
ΔS = ΔQ / T
We can tell that entropy is inversely proportional to temperature.
This means that at constant heat, as the temperature increases, the entropy decreases and vice versa.
Inn this question, the temperature is much lower - a decrease. The effect that this would have on the value of the entropy is that it would be increased. A higher value of entropy would be recorded than the actual value of the entropy.
Calculate the number of milliliters of 0.656 M KOH required to precipitate all of the Co2 ions in 187 mL of 0.745 M Co(NO3)2 solution as Co(OH)2. The equation for the reaction is:
Answer:
THE MILLILITERS OF 0.656 M KOH REQUIRED TO PRECIPITATE ALL THE Co2 IONS IN 187 mL OF 0.745 M Co(NO3)2 SOLUTION IS 212.37 mL
EQUATION FOR THE REACTION IS :
2 KOH + Co(NO3)2 ----------> Co(OH)2 + 2 KNO3
Explanation:
Using dilution formula:
M1V1 = M2V2
V2 = M1 V1 / M2
M1 = 0.745 M
V1 = 187 mL
M2 = 0.656 M
V2 = unknown
V2 = 0.745 * 187 / 0.656
V2 = 139.315 / 0.656
V2 = 212.37 mL
the number of milliliters of 0.656 M KOH required to precipitate all of the Co 2 ions is 212.37 mL.
The equation for the reaction is:
2KOH + Co(NO3)2 ----------> Co(OH)2 + 2KNO3
That is 2 moles of potassium hydroxide react with 1 mole of cobalt(11) nitrate to form 1 mole of cobalt hydroxide and 2 moles of potassium nitrate
Calculate the grams of solute needed to prepare 107 mL of a 2.75 M magnesium
chloride solution
Your Answer:
Answer
Answer: 28.02 g
Explanation:
The M stands for molarity. It is moles of solute/liters of solution. We can use the molarity to convert liters to mL, then make a proportion to find the grams.
[tex]\frac{2.75 mol}{L} *\frac{1L}{1000mL} =\frac{2.75 mol}{1000mL}[/tex]
Now that we have molarity in moles and mL, we can use the 107mL to get moles.
[tex]\frac{2.75moles}{1000mL} *107mL=0.29425mol[/tex]
We would multiply moles by molar mass to get grams. The molar mass of magnesium chloride is 95.211 g/mol.
[tex]0.29425mol*\frac{95.211g}{mol} =28.02g[/tex]
How many atoms make up a molecule of ethanol (C2H6O)? 1 12 8 9 3
Answer:
There are nine atoms in a molecule of ethanol.
Explanation:
i had this on my test to
good luck
130I decays by emission of beta particles to form stable 130Xe. A 3.00 g iodine sample containing some I-130 was recorded as having 9487 disintegrations per min. k = 0.00094 min -
1. How many radioactive I-130 atoms are present in the sample?
The number of radioactive atoms present in the sample is 1.01 × 10⁷ atoms.
Emission of Beta Particles takes place when there is a numerous amount of neutron to the proton in the nucleus. As a result, the neutron is transformed to proton (which is retained in the nucleus) and electron which leaves the nucleus under high energy.
Given that:
[tex]\mathbf{^{130} I \ \ \ \to ^{- \beta } \ \ \ ^{130}Xe }[/tex]
The rate of disintegration of the radioactive sample per minute is expressed by using the formula:
A = kN
where;
A = number of decay per unitk = decay constantN = total number of atomic particles present in the sample∴
[tex]\mathbf{N = \dfrac{A}{k}}[/tex]
[tex]\mathbf{N = \dfrac{9487}{0.00094}}[/tex]
N = 10092553.19 atoms
N = 1.01 × 10⁷ atoms
Therefore, we can conclude that the number of radioactive atoms present in the sample is 1.01 × 10⁷ atoms.
Learn more about emission of beta particles here:
https://brainly.com/question/1600591
The average human body contains 5.00 L of blood with a Fe2+ concentration of 1.10×10−5 M . If a person ingests 9.00 mL of 21.0 mM NaCN, what percentage of iron(II) in the blood would be sequestered by the cyanide ion?
Answer:
The percentage is % [tex]Fe^{2+[/tex] [tex]= 57.3[/tex]%
Explanation:
From the question we are told that
The volume of blood in the human body is [tex]V = 5.0 0 \ L[/tex]
The concentration of [tex]Fe^{2+[/tex] is [tex]C_{F} = 1.10 *10^{-5} \ M[/tex]
The volume of NaCN ingested is [tex]V_N = 9.00 \ mL = 9.00 *10^{-3} \ L[/tex]
The concentration of NaCN ingested is [tex]C_N = 21.0 \ mM = 21.0 *10^{-3} \ M[/tex]
The number of moles of [tex]Fe^{2+[/tex] in the blood is
[tex]N_F = C_F * V[/tex]
substituting values
[tex]N_F = 1.10 *10^{-5} * 5[/tex]
[tex]N_F = 5.5*10^{-5} \ mols[/tex]
The number of moles of [tex]CN^{-}[/tex] ingested is mathematically evaluated as
[tex]N_C = C_N * V_N[/tex]
substituting values
[tex]N_C = 21*10^{-3} * 9 *10^{-3}[/tex]
[tex]N_C = 1.89 *10^{-4} \ mols[/tex]
The balanced chemical equation for the reaction between [tex]Fe^{2+[/tex] and [tex]CN^{-}[/tex] is represented as
[tex]Fe^{2+} + 6 CN^{-} \to [Fe(CN)_6]^{2-}[/tex]
From this reaction we see that
1 mole of [tex]Fe^{2+[/tex] will react with 6 moles of [tex]CN^{-}[/tex]
=> x moles of [tex]Fe^{2+[/tex] will react with [tex]1.89 *10^{-4} \ moles[/tex] of [tex]CN^{-}[/tex]
Thus
[tex]x = \frac{1.89 *10^{-4} * 1}{6}[/tex]
[tex]x = 3.15 *10^{-5}[/tex]
Hence the percentage of [tex]Fe^{2+[/tex] that reacted is mathematically evaluated as
% [tex]Fe^{2+[/tex] [tex]= \frac{3.15 *10^{-5}}{5.5*10^{-5}} * 100[/tex]
% [tex]Fe^{2+[/tex] [tex]= 57.3[/tex]%
Question 39 (1 point)
What is the volume (in L) of 4.20 grams of CO2 gas at STP? (
molar masses are,
Carbon = 12.01 g/mol, and oxygen - 16.00 g/mol)
Your Answer:
Answer:
volume = 2128L
Explanation:
volume at stp = 22.4dm³ =22400L
CO2 = 12 + 2(16) = 44
4.20/44 = volume/22400L
0.095 = volume/22400L
volume = 0.095 x 22400
volume = 2128L
2 Points
Which element has the fewest valence electrons?
A. Magnesium (Mg)
B. Neon (Ne)
C. Chlorine (CI)
O D. Silicon (Si)
SUSNE
Answer:
A. Magnesium (Mg)Explanation:
As the elements go left in the periodic table, they have fewer valence electrons.
Magnesium has 2 valence electrons.
Neon has 8 valence electrons.
Chorine has 7 valence electrons.
Silicon has 4 valence electrons.
Magnesium has the fewest valence electrons.
Answer:
A
Explanation:
Magnesium
If iron metal reacts with an aqueous solution of silver nitrate and zinc reacts with an aqueous solution of iron sulfate, rank these three metals Fe Zn Ag in order of decreasing reactivity.
Answer:
yes!you are right a cloudy formation will be formed when they will react.its because if nitrogen.
8. How many grams of SO2 are there in 2.5 mol of SO2? (Show Work)
Answer:
160g
Explanation:
Mass in grams is equal to product of moles and molar mass of compound.
A sample of an unknown substance has a mass of 0.158kg. If 2,520.0 j of heat is required to heat the substance from 32.0C to 61.0C what is the specific heat of the substance
A sample of an unknown volatile liquid was injected into a Dumas flask and heated until no visible traces of the liquid could be found. The flask and its contents were then rapidly cooled and reweighed The atmospheric pressure and temperature during the experiment were 0.976 atm and 18.0 °C, respectively. The unknown volatile liquid was ________
A sample of an unknown volatile liquid was injected into a Dumas flask ( mflask =27.0928g. Vflask=0.104L) and heated until no visible traces of the liquid could be found. The flask and its contents were then rapidly cooled and reweighed (mflask+vapor=27.4593g) . The atmospheric pressure and temperature during the experiment were 0.976 atm and 18.0 °C, respectively. The unknown volatile liquid was ________
Answer:
The unknown volatile liquid that has an approximate value of a molar mass of 86.23 g/mol is Hexane ( C₆H₁₄)
Explanation:
From the above given question:
the mass of the liquid = mflask+vapor - mflask
the mass of the liquid = 27.4593g - 27.0928g = 0.3665 g
The volume of the Dumas Flask = 0.104 L
The pressure of the Dumas Flask = 0.976 atm
The temperature of the Dumas Flask = 18.0°C = (18 + 273) = 291 K
Using Ideal gas equation:
PV = nRT
0.976 atm × 0.104 L = n × 0.08205 L atm /mol/K × 291 K
n = (0.976 atm × 0.104 L )/ ( 0.08205 L atm /mol/K × 291 K)
n = ( 0.101504 atm L)/ 23.87655 L atm /mol)
n = 0.004251 mol
We know that ;
number of moles = mass/molar mass
∴
0.004251 mol = 0.3665 g/molar mass
molar mass = 0.3665 g / 0.004251 mol
molar mass = 86.23 g/mol
The unknown volatile liquid that has an approximate value of a molar mass of 86.23 g/mol is Hexane ( C₆H₁₄)
Write empirical formula
Answer:
[tex]Pb(ClO_{3})_{4}\\Pb(MnO_{4})_{4}\\Fe(ClO_{3})_{3}\\\Fe(MnO_{4})_{3}\\[/tex]
Explanation:
[tex]Pb^{4+}(ClO_{3}^{-})_{4}--->Pb(ClO_{3})_{4}\\Pb^{4+}(MnO_{4}^{-})_{4}--->Pb(MnO_{4})_{4}\\Fe^{3+}(ClO_{3}^{-})_{3}--->Fe(ClO_{3})_{3}\\\Fe^{3+}(MnO_{4}^{-})_{3}--->Fe(MnO_{4})_{3}\\[/tex]