Answer: [tex]_{70}^{177}\textrm{Yb}\rightarrow _{71}^{177}\textrm{Lu}+_{-1}^{0}\textrm{e}[/tex]
Explanation:
Beta-decay: In this process, a neutron gets converted into a proton and an electron releasing a beta-particle. The beta particle released is basically a electron with -1 charge and no mass.
[tex]_Z^A\textrm{X}\rightarrow _{Z+1}^A\textrm{X}+_{-1}^{0}\textrm{e}[/tex]
General representation of an element is given as:
where,
Z represents Atomic number
A represents Mass number
X represents the symbol of an element
[tex]_{70}^{177}\textrm{Yb}\rightarrow _{71}^{177}\textrm{Lu}+_{-1}^{0}\textrm{e}[/tex]
A 100.-gram sample of H2O(l) at 22.0°C absorbs 830. joules of heat. What will be the final temperature of the water? Hurry pleaseeee!!!
Answer:
That is extremely confusing. Try contacting your prof.
Explanation:
An atom absorbs radiation. Select the possible changes this could have on the atom:
*it can change the atomic mass
*it can cause the atom to lose an electron
*it can cause the atom to become and ion
*it cause the atom to change element
Answer:
*it can cause the atom to become and ion
An increase in the volume of a substance because of an increase in temperature is called
Answer:
Its called contraction.
Explanation:
write the balanced equation for the formation of carbon dioxide.
A chemical process used to produce ethanol as a fuel additive was expected to produce 5,000 kilograms of ethanol based on the amounts of starting materials used, but only 4,760 kilograms were produced. What was the percent yield for ethanol in this process? A)1.09 percent B)4.80 percent C)95.2 percent D)105 percent
Answer:
The percent yield for ethanol in this process is 95.2%
Explanation:
Yield is the ratio between the amount of product actually obtained in the reaction and the maximum amount of product that could have been obtained if the reagents had been completely consumed.
The theoretical yield is the yield is the maximum you can get in a reaction.
On the other hand, the actual performance shows what you really get in experimentation. It is generally less than the theoretical yield.
So, the percentage return is the actual return times the theoretical return multiplied by 100.
So, in this case the percentage yield will be calculated as:
[tex]percent yield=\frac{4,760 kg}{5,000 kg} *100[/tex]
percent yield= 95.2%
The percent yield for ethanol in this process is 95.2%
(i) CH2=CH-CH2-CH=CH,
Give IUPAC name of the compound.
Answer:
The IUPAC name of CH3 – CH2 – CH2 – CH=CH2 is Pent-1-ene.
Suppose you have a mixture of iron filings, sand, and sugar and you want to separate the three. Fill in the materials you expect to see at each step as you perform the actions shown to separate them. The materials you may expect to see are: iron filings, sand, sugar, and sugar water.
Answer:
Explanation:
mixture of iron filings, sand, and sugar
First Step - Iron Fillings
Use a magnet to separate the iron fillings from the mixture. Due to magnetic properties of the iron fillings, the magnets would attract the iron fillings and separate it from the mixture.
Second step - Sand
Place the sand and sugar mixture in water. The sugar would dissolve in water and the sand easily separated by filtration.
Third step - Sugar and Sugar water
Boil the sugar water to remove the water and place in the refrigerator for crystallization of the sugar.
HELP HELP HELP HELP HELP HELP HELP HELP HELP
Answer:
3
Explanation:
I got this i am very smart
Answer:
The answer is 3) same mass more volume
Explanation:
Mass measures the amount of matter in a substance or an object.
Volume measures the amount of space that a substance or an object takes up.
answers this...i gave brainlest!!
Answer:
I hope I can help
Explanation:
I hope I can help you
Which volume is the greatest?
Microliter
Milliliter
Deciliter
Centiliter
Answer:
Deciliter = 0.1 L
Explanation:
The options are unit of volume. In order to determine which is greatest, all the options would be converted to liter.
Microliter = 1e-6 L
Mililiter = 0.001 L
Deciliter = 0.1 L
Centiliter = 0.01 L
Among all the options; Deciliter = 0.1 L is the greatest.
A __________________ chemical equation shows that the same number of atoms in the reactants are also in the product.
balanced
rearranged
transferred
beautiful
Calculate the number of moles in 2.67 g of carbon trihydride
Answer:0.178 moles
Explanation: carbon trihydride seems to be an unusual name for the methyl group CH3–
ionic wt 15
moles = 2.67/15 = 0.178
How many grams are there in 3.4 x 10^24 atoms of He?
Group of answer choices
2.07
5.7 g
0.57 g
20.7
Given :
Number of He atoms, [tex]n = 3.4\times 10^{24}[/tex] atoms.
To Find :
How many grams are their in given number of He atoms.
Solution :
We know, molecular mass of He is 4 g. It means that their are [tex]6.022 \times 10^{23}[/tex] atoms in 4 g of He.
Let, number of gram He in [tex]3.4\times 10^{24}[/tex] atoms is x , so :
[tex]x = \dfrac{3.4\times 10^{24}}{6.022\times 10^{23}}\times 4\\\\x = $$22.58\ g[/tex]
Therefore, grams of He atoms is 22.58 g .
How many grams of NaOH do you need to dissolve to make 1.55 Liters of a 1.55 Molar solution?
Answer:
Mass = 96g
Explanation:
Molarity = number of moles/volume of solvent
According to the provided information, volume = 1.55L, Molarity = 1.55M
number of moles (n) = molarity × volume
n = 1.55 × 1.55
n = 2.4025
n = 2.40mol
For NaOH, molar mass = 23 + 16 + 1 = 40g/mol
mole = mass/molar mass
Mass = molar mass × mole
Mass = 40 × 2.40
Mass = 96g
how many lbs are in 60 oz
Answer:
3 pounds 13 ounces
Explanation:
Math
Answer:
3.75
Explanation:
Someone help me to these please i dont have much time
Answer:
2
Explanation:
it is #2. the answer is 2
Answer:
Hope this will help you.... Take care
If 1 g of radium-226 has an activity of 1 curie, what is the activity of 2 g of radium-226? 1 curie 2 curies 4 curies 10 curies
Answer:
2 curies
Explanation:
This is actually pretty easy to explain.
The Radium-226 which is an isotope of the radium, have an activity of curie. This is basically used in radioactivity of certain elements.
As in both cases we have Radium -226 and we are only varying the mass of the Radium, then, we can just do a rule of 3 to calculate this:
1 g Ra-226 --------> 1 Curie
2 g Ra-226 --------> X Curie
Solving for X:
X = 2 g * 1 Curie / 1 g
X = 2 Curies.You can also see this by taking 2 grams of Ra per separate. On one side you have 1 g of Ra-226 and on the other side, you have another 1 g of Ra-226. Both have 1 Cury of activity. If you put both on the same side, you will have 1 Cury of 1 isotope plus 1 cury of the other isotope, final result? 2 curies.
Hope this helps
Which of the following is a nonelectrolyte?
HCI
Rb2SO4
CH3CH2OH
KOH
NaCl
if you are using 657.0 grams of oxygen gas to react with calcium how many gram of calcium oxide will u product
Answer:
The amount in grams of CaO that will be produced is 2,302.67824 grams
Explanation:
The reaction between calcium and oxygen to produce calcium oxide (quicklime) can be presented as follows;
2Ca (s) + O₂ (g) → 2CaO (s)
From the above chemical equation, we have;
2 moles of calcium, Ca, react with 1 mole of oxygen gas, O₂, to produce 2 moles of CaO
With the assumption that there is an excess amount of Ca, we have;
The molar mass of O₂ = 32 g/mol
The number of moles, 'n', of O₂ in 657.0 grams of oxygen is therefore;
The number of moles of a substance = Mass of substance/(Molar mass of substance)
∴ n = 657.0 g/(32 g/mol) = 20.53125 moles
The number of moles of O₂ in the 657.0 grams of oxygen present in the reaction, n = 20.53125 moles
1 mole of O₂ produces 2 moles of CaO, therefore, 20.53125 moles of oxygen will produce 2 × 20.53125 or 41.0625 moles of CaO
The molar mass of CaO = 56.0774 g/mol
Therefore, the mass of 41.0625 moles of CaO is given as follows;
Mass of substance = (The number of moles of a substance) × (Molar mass of substance)
The mass of CaO produced = 41.0625 moles × 56.0774 g/mol = 2,302.67824 g.
Name the molecule when potassium reacts with chlorine?
Answer: Potassium Chloride
Explanation:
1 point
If the element Lithium (Li) were to bond with the element Sulfur (s), what
type of bond can you predict will be formed and why?*
A. Covalent-Li and S are two nonmetals
B. Covalent-Li is a metal and S is a nonmetal
C. Ionic-Li and S are two nonmetals
D. Ionic-Li is a metal and S is a nonmetal
Answer:
C. Ionic-Li and S are two nonmetals
why is productivity greatest near the ocean's surface?
Answer:
Sunlight penetrates the top layers of the ocean, so photosynthesis occurs there. ... Upwelling brings nutrients to the surface.
I gave brainlest:: answer this .....
Wine goes bad soon after opening because the ethanol ch3ch2oh in it reacts with oxygen gas o2 from the air to form water h2o and acetic acid ch3cooh , the main ingredient of vinegar. Calculate the moles of ethanol needed to produce 0.055mol of acetic acid. Be sure your answer has a unit symbol, if necessary, and round it to the correct number of significant digits.
Answer:
For producing 0.55 mole of acetic acid, 0.55 mole of ethanol is required.
Explanation:
The balanced equation for this reaction is
CH3CH2OH + O2 --> CH3COOH + H2O
As we can see in this equation, the ration of number of moles of acetic acid to the number of moles of ethanal is equal to [tex]1 : 1[/tex]
Hence, in order to produce one mole of acetic acid, 1 mole of ethanol is required.
Thus, for producing 0.55 mole of acetic acid, 0.55 mole of ethanol is required.
Iron is a mineral. A nail made out of iron
a mineral.
Answers:
Is also
Is not
Answer:
is also
Explanation:
if iron is a mineral then a nail is a mineral to
Atomic Radius________across (left to right) a period and______down a group.
Answer: Decreases across the period and increases down the group
a primary substance that cannot be divided into separate substances; one of about 112 different basic varieties of matter making up the universe
Answer:
No you can not divide a primary substance into a seperat one because ot wpuld be like divideing the universe
how many moles are in 6.31x10^24 C atoms
Answer:
Explanation:
1 mol of any chemical is 6.02 * 10^23
x mol of any chemical is 6.31 * 10^24
You should look at this before you put it in your calculator. You should think roughly 10.
Now you can set it up as a proportion
1/x = 6.02 * 10^23/6.31 * 10^24 Cross multiply
6.02 * 10^23 x = 1 * 6.31 * 10^24 Divide by 6.02 * 10^23
x = 6.31 * 10^24 / 6.02 * 10^23
x = 10.48 mols.
2) Which liberates the most energy?
A) F(g) + e ➡️ F-(g)
B) N(g) +e- ➡️ N-(g)
C) O(g) +e ➡️ O-(g)
D) C(g) +e ➡️ C-(g)
Answer: [tex]F(g)+e^-\rightarrow F^-(g)[/tex]
Explanation:
Electron gain enthalpy is defined as energy released on addition of electron to an isolated gaseous atom.
The amount of energy released will be maximum when the tendency to attract electrons is maximum. As flourine has atomic number of 9 and has electronic configuration of 2,7. It can readily gain 1 electron to attain stable noble gas configuration and hence liberates maximum energy.
[tex]F(g)+e^-\rightarrow F^-(g)[/tex]
(NH4)3P is it Ionic or Molecular??
Answer: It is molecular
Explanation: The reason it is molecular is because it has no ions in the formula it only has the molecular mass which is the reason why it is in fact molecular