Answer:
Epsilon should make the product instead of buying it
Explanation:
Direct material = $8.4
Direct labor = $24.4
Overhead = $42
Relevant cost = $8.4 + $24.4 + ($42x70%)
Relevant cost = $8.4 + $24.4 +$29.4
Relevant cost = $62.2
Cost to make = $62.2
Cost to buy = $66.2
Difference = $4
Epsilon should make this product instead of buying it from another supplier
because the cost to make the product is much lower than buying it.
Mattola Company is giving each of its employees a holiday bonus of $125 on December 16 (a non payday). The company wants each employee's check to be $125. The supplemental tax percent is used. Round your calculations and answers to the nearest cent.
a. What will be the gross amount of each bonus if each employee pays a state income tax of 2.8% (besides the other payroll taxes)?
b. What would the net amount of each bonus check be if the company did not gross-up the bonus?
Answer:
a. $193.65
b. $80.69
Explanation:
The computation is shown below:
a) The gross amount of each bonud is
= Holiday bonus ÷ (1 - supplemental tax rate - OSADI tax rate - HI rate - state tax rate)
= $125 ÷ (1 - 0.25 - 0.062 - 0.0145 - 0.028)
= $125 ÷ 0.6455
= $193.65
b) Now the Net amount of each bonus check is
= Holiday bonus - (Holiday bonus × supplemental tax rate - Holiday bonus × OSADI tax rate - Holiday bonus × HI rate - Holiday bonus × state tax rate)
= $125 - ($125 × 0.25) - ($125 × 0.062) - ($125 × 0.0145) - ($125 × 0.028)
= $125 - $31.25 - $7.75 - $1.8125 - $3.5
= $80.69
Refer to the different tax table rate
A vacuum manufacturer has prepared the following cost data for manufacturing one of its engine components based on the annual production of 50,000 units.
Description Cost per Month
Direct Materials $75,000
Direct Labor $100,000
Total $175,000
In addition, variable factory overhead is applied at $7.50 per unit. Fixed factory overhead is applied at 150% of direct labor cost per unit. The vacuums sell for $150 each. A third party has offered to make the engines for $60 per unit. 75% of fixed factory overhead, which represents executive salaries, rent, depreciation, and taxes, continue regardless of the decision. Should the company make or buy the engines?
Answer:
Make or Buy Decisions:
a) Make (50,000 units)
Direct materials $75,000
Direct labor 100,000
Variable overhead 375,000
Total variable costs $550,000
Contribution $6,950,000
Sales $7,500,000
Fixed overhead 150,000
Net profit $7,350,000
b) Buy (50,000):
Purchase price $3,000,000
Contribution $4,500,000
Fixed costs 112,500
Net profit $4,387,500
c) The company should make the engines.
Explanation:
a) Variable overhead = $375,000 ($7.50 x 50,000)
b) Fixed overhead = $150,000 ($100,000 x 1.5)
c) Sales = $7,500,000 ($150 x 50,000)
d) Purchase = $3,000,000 ($60 x 50,000)
e) Unavoidable Fixed overhead = $112,500 ($150,000 x 75%)
f) The problem is called a make or buy decision because, management of this company is faced with two options. In order to arrive at the better option in terms of long-term financial implication, the costs and profitability of the decision must be taken into consideration. Relevant costs are considered. A look at the two options, clearly shows that it makes better financial sense for the company to make than to buy the engines outside. Therefore, management is advised to make as the company will make much more sustainable profit by so doing.
You’re trying to save to buy a new $245,000 Ferrari. You have $50,000 today that can be invested at your bank. The bank pays 4.3 percent annual interest on its accounts. How long will it be before you have enough to buy the car?
Answer:
38 years
Explanation:
You want to find n such that the multiplier over n years gets you from 50,000 to 245,000.
245,000 = 50,000(1 +4.3%)^n
4.9 = 1.043^n
log(4.9) = n·log(1.043)
n = log(4.9)/log(1.043) ≈ 37.7
It will be about 38 years before you will have enough to afford the car at today's price.
_____
Comment on car prices
The rate of inflation of car prices has been about 1.67% since 1953, so taking that into account, you will need much more than $245000 to buy the car. It will take more than 62 years for your bank account to catch up to the price of the car.
Fred owns a small manufacturing plant. His friend Paul also owns a manufacturing plant and has talked to Fred about issues he has found so far with his system. What is Paul likely to say
Answer:
Please refer to the below explanation.
Explanation;
With regards to the above, Paul is likely to say that Fred should beware of the high price to buy and maintain the cost accounting system. Although there are faults or issues in the small manufacturing plant owned by Fred, yet he must estimate the cost of buying new plant for profitability purpose.
Paul is also likely to tell Fred that he should inform his accountant to conduct reconciliations inorder to ensure that the rates in the system makes sense when compared to actual rate. Fred's accountant would also ensure that the rate loaded in their system correspond with actual rates dispensed by the system. This is to ensure that the anomaly in the system is constantly monitored.
Stylon Co., a women's clothing store, purchased $48,000 of merchandise from a supplier on account, terms FOB destination, 2/10, n/30, using the net method under a perpetual inventory system. Stylon returned merchandise with an invoice amount of $7,500, receiving a credit memo. a. Journalize Stylon's entry to record the purchase. If an amount box does not require an entry, leave it blank. b. Journalize Stylon's entry to record the merchandise return. If an amount box does not require an entry, leave it blank. c. Journalize Stylon's entry to record the payment within the discount period of 10 days. If an amount box does not require an entry, leave it blank. d. Journalize Stylon's entry to record the payment beyond the discount period of 10 days. If an amount box does not require an entry, leave it blank.
Answer:
Stylon Company.
General Journal
Net Method
The following entries have been passed using net method.
Sr. No Particulars Debit Credit
a. Merchandise Inventory 47040
Accounts Payable 47040
Purchased $48,000 of merchandise from a supplier on account, terms FOB destination, 2/10, n/30, using the net method under a perpetual inventory system
b. Accounts Payable 7350
Merchandise Inventory 7350
Stylon returned merchandise with an invoice amount of $7,500,
c. Accounts Payable 39690
Cash 39690
Stylon's entry to record the payment within the discount period of 10 days
d. Discount Lost 810
Accounts Payable 810
Accounts Payable 40500
Cash 40500
Stylon's entry to record the payment beyond the discount period of 10 days.
The Alfa Co. has a 6% coupon bond outstanding that pays annual interest. Calculate the annual interest payment on a $1,000 face value bond. Group of answer choices.
Answer: $60
Explanation:
The Annual Interest payment is also known as the Coupon payment.
The Issuers of the bond pay this to the Holders in periods until the bond matures.
Annual Interest Payment = Face value of bond * Coupon rate
= 1,000 * 6%
= $60
The standard rate of pay is $10 per direct labor hour. If the actual direct labor payroll was $39,200 for 4,000 direct labor hours worked, the direct labor price variance is: a. $800 unfavorable. b. $800 favorable. c. $1,000 unfavorable. d. $1,000 favorable.
Answer:
j,utiy5t54e3w25p0l8tuegtr3129lo,ukthngtrf234567ui6klu,khjmhntgf23
Explanation:
uio.,tukwgtw345678oolukmtee3e234567o97kitwr3e45678o08lkiygre32
The following is TRUE about Inventory:________.A. Firms decrease inventory because there is a risk of significant and unpredictable fluctuations in downstream demand B. Firms decrease inventory because there are price discounts or transportation discounts associated with ordering in larger quantities C. Firms decrease inventory because the more we spend on inventory, the more we need to spend on other inventory-related expenditures D. Firms decrease inventory because there is a risk of interruptions in the flow of components/materials from upstream suppliers E. Firms decrease inventory because there is a risk of interruptions due to unreliable productivity and quality.
Answer:
The correct answer is option (c).
Explanation:
Solution
From the question sated above the answer is, Firms or organisation decrease inventory because the more we spend on inventory, the more we will need to spend on the other related inventory expenditures.
The reason is because if the inventory is kept full or complete, then the cost related or connected with the maintenance of the inventory increases or goes up and it is not beneficial for the company itself.
The true statement about inventory is that Firms decrease inventory because the more we spend on inventory, the more we need to spend on other inventory-related expenditures.
Inventory management is simply known as a systematic approach to sourcing, storing, and selling inventory.
It includes raw materials and finished goods. It is also regarded as having the right stock and at the right cost.
Inventory management is used by companies to know which and how much stock to buy and at what time.
Learn more from
https://brainly.com/question/23390392
Broussard Skateboard's sales are expected to increase by 20% from $7.6 million in 2016 to $9.12 million in 2017. Its assets totaled $4 million at the end of 2016. Broussard is already at full capacity, so its assets must grow at the same rate as projected sales. At the end of 2016, current liabilities were $1.4 million, consisting of $450,000 of accounts payable, $500,000 of notes payable, and $450,000 of accruals. The after-tax profit margin is forecasted to be 4%, and the forecasted payout ratio is 70%. What would be the additional funds needed? Do not round intermediate calculations. Round your answer to the nearest dollar. $ Assume that an otherwise identical firm had $5 million in total assets at the end of 2016. The identical firm's capital intensity ratio (A0*/S0) is higher than than Broussard's; therefore, the identical firm is -Select- capital intensive - it would require -Select- increase in total assets to support the increase in sales.
Answer:
$510,560
Explanation:
AFN = (A/S) x (Δ Sales) - (L/S) x (Δ Sales) - (PM x FS x (1-d))
A = assets = $4,000,000S = sales = $7,600,000L = liabilities that vary according to sales level = $450,000 + $450,000 = $900,000Δ Sales = change in sales = $9,120,000 - $7,600,000 = $1,520,000PM = profit margin = 4%FS = forecasted sales = $9,120,000d = payout ratio = 70%AFN = ($4,000,000/$7,600,000) x ($1,520,000) - ($900,000/$7,600,000) x ($1,520,000) - (4% x $9,120,000 x (1 - 70%)) = $800,000 - $180,000 - $109,440 = $510,560
A company had the following transactions during September, the first month of its operations: Issued 50,000 shares of common stock in exchange for $600,000. Purchased land for $400,000, using a $150,000 cash down payment and signing a note payable for the balance. Received $5,000 from a customer for services to be performed in December. Made a $60,000 payment on the note payable from the purchase of the land. Total monthly sales: Cash sales $50,000 Credit Sales: $17,000 Purchased equipment on credit for $63,000. Collected $8,000 from customers on account. Paid $2,000 for September employee wages. Received a utility bill for $500 which will be paid next month. What is net income for the month of September
Answer:
Net income for the month of September is $451,000
Explanation:
Particulars Amount
Issue of common stock 600,000
Receipt from customer 5,000
Cash sales 50,000
Collection from customer 8,000 663,000
Less:
Cash down-payment made (150,000)
Payment made on notes payable (60,000)
Employee wage paid (2,000)
Cash balance as at end of Sep. 451,000
Mello Manufacturing Company is a diversified manufacturer that manufactures three products (Alpha, Beta, and Omega) in a continuous production process. Senior management has asked the controller to conduct an activity-based costing study. The controller identified the amount of factory overhead required by the critical activities of the organization as follows:
Activity Activity Cost Pool
Production $259,200.00
Setup 55,000.00
Material handling 9,750.00
Inspection 60,000.00
Product engineering 123,200.00
Total $507,150.00
The activity bases identified for each activity are as follows:
Activity Activity Base
Production Machine hours
Setup Number of setups
Material handling Number of parts
Inspection Number of inspection hours
Product engineering Number of engineering hours
The activity-base usage quantities and units produced for the three products were determined from corporate records and are as follows:
Machine Hours Number of Setup Number of parts Number of inspection hours Number of engineering hours Units
Alpha 1,440 75 65 400 125 1,800
Beta 1,080 165 80 300 175 1,350
Omega 720 310 180 500 140 900
Total 3,240 550 325 1,200 440 4,050
Each product requires 40 minutes per unit of machine time.
Required:
a. Complete the Activity Tables for Alpha, Beta and Omega.
b. Determine the activity rate for each activity.
c. Use the activity rates in (1) to determine the total and per-unit activity costs associated with all three products.
d. Why aren’t the activity unit costs equal across all three products since they require the same machine time per unit?
Answer:
Attached are the detailed solution tables for
A) complete the activity rate for each activity is a general question covering so solution starts from B
B) calculation of the activity rate for each activity: shown in the attached table
C) activity cost per unit : alpha = $99.81, Beta = $125.41, 0mega = $175.78
D ) The activity unit costs are not equal across all three products because of different activity bases such as machine hours, setups, parts and inspection hours that also determines the activity cost
Explanation:
A) complete the activity rate for each activity is a general question covering so solution starts from (B)
B) calculation of the activity rate for each activity: shown in the attached table
C) Calculation of activity cost of all products
activity cost of each product = use of product activity * activity rate
production = ($80 * Machine hours of each product )
setup = ( $100 * number of setups for each product )
Material handling = ( $30 * number of parts of each product )
Inspection = ( $50 * number of inspection hours for each product )
Product engineering = ( $280 * number of engineering hour for each product )
Activity cost per unit = total cost of activity of each product / unit produced for each product
D) The activity unit costs are not equal across all three products because of different activity bases such as machine hours, setups, parts and inspection hours that also determines the activity cost
Swiss Group reports net income of $40,000 for 2019. At the beginning of 2019, Swiss Group had $200,000 in assets. By the end of 2019, assets had grown to $300,000. What is Swiss Group's 2016 return on assets? How would you assess its performance if competitors average an 11% return on assets?
Answer:
For the tear 2019, net income is 40,000
Beginning of the year 2019, asset of the S are 200,000
Ending of the year 2019, asset of the S are 300,000
Average asset for 2019= Beginning assets + Closing assets / 2
Average asset for 2019= 200,000 + 300,000 / 2
Average asset for 2019= $250,000
Return on assets = Net income / Average assets * 100%
= 40,000 / 250,000 * 100
=16%
Thus, the return on assets is 16%
Conclusion: If the average return of assets of the competitors are 11%, It means S uses the assets efficient manner, so performance of the S is very good ad return of the S is higher than competitors on asset
On January 1, 2021, an investor paid $296,000 for bonds with a face amount of $316,000. The contract rate of interest is 12% while the current market rate of interest is 15%. Using the effective interest method, how much interest income is recognized by the investor in 2022 (assume annual interest payments and amortization)
Answer:
$45,372
Explanation:
The computation of the interest income using the effective interest method is shown below
Interest Income is
= [Paid amount + (Paid amount × current market rate of interest) - (face value of the bond × contract rate of interest)] × current market rate of finterest
= [$296,000 + ($296,000 × 15%) - ($316,000 × 12%)] × 15%
= [$296,000 + $44,400 - $37,920)} × 15%
= $45,372
We simply applied the above formula
What is the coupon rate for a bond with 3 years until maturity, a price of $1,053.46, and a yield to maturity of 6%? Interest is paid annually.
Answer:
Coupon rate is 8%
Explanation:
We can ascertain the coupon rate by first of all determine the amount of coupon with pmt excel function below:
=pmt(rate,nper,-pv,fv)
rate is yield to maturity of 6%
nper is the number of coupons before maturity i.e 3 annual coupons in three years
pv is the current market price of $1,053.46
fv is the par value of $1,000
=pmt(6%,3,-1053.46,1000)=80
Coupon rate=pmt/face value=80/1000=8%
Eviyan recently received a copy of his performance review report. During the review, his manager took notes regarding his performance and typed them up for the report, Eviyan was required to write a review of his own work following a questionnaire provided by the employer, and comments were solicited from other employees regarding his performance. Because he also has contact with the public, comments that were submitted to the company from the public concerning his performance were included in the report. After reading the report he received a phone call from his manager’s secretary informing him that he has been scheduled with an appointment with the manager the next day. If the manager is following good performance review policies, why has he scheduled the meeting with Eviyan? Group of answer choices The manager has scheduled him for a meeting for a performance feedback interview. The manager wants to meet with him so he can tell him about his evaluation and tell him in person that he is doing well or poorly and will then attempt to get Eviyan to agree to the performance evaluation. The manager has scheduled the meeting to solve Eviyan’s performance problems. The manager has scheduled the meeting to tell Eviyan what he has done well or poorly and give him the opportunity to defend himself.
Answer:
Eviyan's Performance Evaluation Report:
The manager has scheduled him for a meeting for a performance feedback interview.
Explanation:
Performance feedback interview is an opportunity for the employee to meet with his manager in order to iron out issues and reflect on the outcome of the evaluation. The employee will also be required at the interview to explain and defend the performance result face to face with the manager. Since there are always some differences in perception and evaluation, the interview provides that needed chance for a detailed discussion so that corrective measures will be defined and agreed upon. It is a good performance policy to schedule such an interview following a performance evaluation report.
Attraction Corporation produces specially machined parts. The parts are produced in batches in one continuous manufacturing process. Each part is custom produced and requires special engineering design activity (based on customer specifications). Once the design is completed, the equipment can be set up for batch production. Once the batch is completed, a sample is taken and inspected to see if the parts are within the tolerances allowed. Thus, the manufacturing process has four activities: engineering, setups, machining, and inspecting. In addition, there is a sustaining process with two activities: providing utilities (plantwide) and providing space. Costs have been assigned to each activity using direct tracing and resource drivers:Engineering $1,000,000Setups 900,000Machining 2,000,000Inspection 800,000Providing space 250,000Providing utilities 180,000Activity drivers for each activity have been identified and their practical capacities listed:Machine hours 25,000Setups 200Engineering hours 5,000Inspection hours 2,500The costs of facility-level activities are assigned using machine hours.What is (are) the unit-level activity(ies)?a. setups.b. providing space.c. machining.d. engineering.
Answer:
c. machining.
Explanation:
Unit level activities take place in order to manufacture the product. This manufacturing process has four activities:
engineering setups machininginspectingUnit level activities depend on the amount of units produced, this means that as more units are produced, more costs will be allocated. In this case, engineering, setups and inspecting are done on a batch basis, which means that they are batch level activities.
Only machining costs are proportional to the number of units produced.
If the total revenue variance is favorable and the revenue price variance is unfavorable, then the revenue volume variance must a.exceed the revenue price variance and be favorable b.be less than the revenue price variance and be favorable c.be less than the revenue price variance and be unfavorable d.be equal to the revenue price variance and be favorable
Answer: a.exceed the revenue price variance and be favorable
Explanation:
Revenue Volume x Revenue Price = Total Revenue
From the above formula, for the Total Revenue to be variated positively and yet the Revenue Price is of Negative Variance, it would follow logically that the other variable in the transaction contributed to the favorable variance of the Total Revenue apart from the Revenue Price.
The only other variable is the Revenue Volume. The Revenue volume must therefore have been large and favorable enough to offset the Negative Variance of the Revenue Price.
When a financial friction is added to the short-run model it: Group of answer choices shifts the MP curve up. shifts the IS curve down. shifts the AS curve down. is represented by a movement along the MP curve. is represented by a movement along the IS curve.
Answer:
When a financial friction is added to the short-run model it: shifts the MP curve up.
Explanation:
The short-run model, IS/MP model, describes the Investment-Savings/Monetary Policy model used by the US Federal Reserve to decrease the real interest rate through the Federal Funds rate, i.
The Federal Funds rate is the interest rate that commercial banks with excess reserves lend to others in deficit. The resulting shift occasions a decrease in the real interest rate which triggers an increase in the inflation rate, and vice versa. With such short-run changes in the interest rate, inflation and output is influenced in desirable directions by the Federal Reserve as a foundation to achieve long-term shifts in the AD-AS model.
The AD-AS model is a long-term model that describes Aggregate Demand and Aggregate Supply which impact long-term inflation, interest rates, and output.
The _____ dictates that an importer must pay a specified amount of money by a specific date.
A. bill of exchange
B. drawee
C. lease agreement
D. letter of credit
E. bill of lading
Answer:
A bill of exchange
Explanation:
This is the answer google bill of exchange and it matches this description very close i think at least
Adam Smith believed that incentives to seek personal gain would create wealth, but that the government must then step in to make sure that this wealth is equitably distributed.
a. True
b. False
Answer:
b. False
Explanation:
Adam Smith believed that incentives to seek personal gain would create wealth. He did not believe in active government intervention in order to redistribute wealth in an equitable manner. Adam Smith favored capitalism and the accumulation of wealth by individuals, he did not favor socialism and the redistribution of wealth.
As a person engaged in the image business, the impression you project consists of your outward apperance the conduct you exhibt in the workplace is known as
Answer:As a person engaged in the image business, the impression you project consists of your outward apperance the conduct you exhibt in the workplace is known as
Explanation:j
Gaggle, Inc. and Microhard, Inc., both large publicly held corporations, form a joint venture to develop a new smartphone operating system. Large corporations like this usually form a joint venture for
The question is incomplete:
Gaggle, Inc. and Microhard, Inc., both large publicly held corporations, form a joint venture to develop a new smartphone operating system. Large corporations like this usually form a joint venture for:
-A single transaction or project
-A stated duration of not more than one year
-An implied duration of not more than six months
-A perpetual existence
Answer:
-A single transaction or project
Explanation:
A joint venture is an agreement in which two or more companies share their resources to achieve a specific objective but each business stays as an independent entity. According to this, the answer is that large corporations like this usually form a joint venture for a single transaction or project as the companies maintain their independence and agree to work together for a specific goal or task.
The other options are not right because joint ventures don't have a specifc duration, it depends on the terms establish by the parties and the joint venture will exist for the period of time determined on the agreement.
A company had the following purchases during its first year of operations:
January: 17 units at $127
February: 27 units at $137
May: 22 units at $147
September: 19 units at $157
November: 17 units at $167
On December 31, there were 61 units remaining in ending inventory. These 61 units consisted of 9 from January, 11 from February, 13 from May, 11 from September, and 17 from November. Using the specific identification method, what is the cost of the ending inventory?
a. $8,960.
b. $7,620.
c. $9,294.
d. $9,127.
e. $7,714.
Answer:
Ending inventory value= $9,127
Explanation:
Giving the following information:
January: 17 units at $127
February: 27 units at $137
May: 22 units at $147
September: 19 units at $157
November: 17 units at $167
Using the specific identification method, we need to multiply each unit for its specific cost.
Ending inventory:
January= 9*127= 1,143
February= 11*137= 1,507
May= 13*147= 1,911
September= 11*157= 1,727
November= 17*167= 2,839
Ending inventory value= $9,127
Ace Industries has current assets equal to $3 million. The company's current ratio is 1.5, and its quick ratio is 1.1. What is the firm's level of current liabilities? What is the firm's level of inventories? Do not round intermediate calculations. Round your answers to the nearest dollar.
Answer:
a
Explanation:
I have no clue but good luck on test
The following list includes selected permanent accounts and all of the temporary accounts from the December 31, 2017, unadjusted trial balance of Emiko Co. Use these account balances along with the additional information to journalize: a. Adjusting entriesb. Closing entries. Emiko Co. uses a perpetual inventory system. Debit CreditMerchandise inventory $30,000 Prepaid selling expenses 5,600 K. Emiko, Withdrawals 33,000 Sales $529,000Sales returns and allowances 17,500 Sales discounts 5,000 Cost of goods sold 212,000 Sales salaries expense 48,000 Utilities expense 15,000 Selling expenses 36,000 Administrative expenses 105,000 Additional Information: Accrued and unpaid sales salaries amount to $1,700. Prepaid selling expenses of $3,000 have expired. A physical count of year-end merchandise inventory is taken to determine shrinkage and shows $28,700 of goods still available.
Answer:
Emiko Co.
a) Adjusting Journal Entries:
Debit Sales Salaries Expense $1,700
Credit Sales Salaries Payable $1,700
To record unpaid salaries expense.
Debit Selling Expenses $3,000
Credit Prepaid Selling Expenses $3,000
To record expired expenses.
b) Closing Journal Entries:
Debit Income Summary $30,000
Credit Beginning Inventory $30,000
To close the beginning inventory to the Income Summary.
Debit Sales $529,000
Credit Sales Returns and Allowances $17,500
Credit Sales Discount $5,000
Credit Income Summary $506,500
To close sales, sales returns & allowances & discount.
Debit Income Summary $212,000
Credit Cost of goods sold $212,000
To close cost of goods sold to the income summary.
Debit Income Summary $208,700
Credit Sales Salaries $49,700
Credit Utilities $15,000
Credit Selling expenses $39,000
Credit Administrative expenses $105,000
To close expenses to the income summary.
Explanation:
Adjusting journal entries are often used to make some changes in the accounts at the end of the reporting period in order to ensure that transactions are reported on the accrual basis. Entries made under this journal are usually accrued expenses and income, prepaid expenses and deferred revenue, depreciation charges.
On the other hand, closing journal entries are used to differentiate the temporary accounts from the permanent accounts. Temporary accounts are closed at the end of the accounting period to the Income Summary. Permanents accounts are carried over to the next accounting period. Their accounts make up the balance sheet and their opening balances of the next reporting period.
Gentleman Gym just paid its annual dividend of $4 per share, and it is widely expected that the dividend will increase by 5% per year indefinitely.
Requried:
a. What price should the stock sell at if the discount rate is 15% (Do not round intermediate calculations. Round your answer to 2 decimal places.)
b. What price should the stock sell at if the discount rate is 12%. (Do not round intermediate calculations. Round your answer to 2 decimal places.)
Answer:
a) Price of stock = $42
b) Price of stock = $60
Explanation:
The price of a share can be calculated using the dividend valuation model
According to this model the value of share is equal to the sum of the present values of its future cash dividends discounted at the required rate of return.
If dividend is expected to grow at a given rate , the value of a share is calculated using the formula below:
Price=Do (1+g)/(k-g)
Where Do- Dividend now, g- growth rate, k- required rate of return(cost of equity)
a) Where discount rate is 15%
Price of stock = 4× (1.05)/(0.15-0.05) = 42
Price of stock = $42
b) Where discount rate is 12%
Price of stock =4× (1.05)/(0.12-0.05)= 60
Price of stock = $60
A company has $600 in inventory, $1,885 in net fixed assets, $276 in accounts receivable, $125 in cash, and $322 in accounts payable. What are the company's total current assets
Answer:
The answer is $1001
Explanation:
Solution
Given that:
A company inventory is = $600
Net fixed assets =$1,885
Cash =$125
Accounts payable = $322
Now we have to find the company's total current assets
Thus
Inventory =$ 600
Accounts receivable=$276
Cash=$125
Total current assets =$1001
Hence the total assets of the company is $1001
In each succeeding payment on an installment note:_______A. The amount of interest expense increases. B. The amount of interest expense decreases. C. The amount of interest expense is unchanged. D. The amounts paid for both interest and principal increase proportionately.
Answer:
Explanation:
Yess
The green giant has 4 percent profit margin and a 30 percent dividend payout ratio. The total assets turnover is 1.2 times and the equity multiplier is 1.6. What is the sustainable rate of growth?
Answer:
5.68%
Explanation:
The green giant has a 4% profit ratio
= 4/100
= 0.04
The dividend payout ratio is 30%
= 30/100
= 0.3
The total assets turnover is 1.2 times
The equity multiplier is 1.6
The first step is to calculate the return on equity
ROE= Profit margin×Total assets turnover×Equity multiplier
= 0.04×1.2×1.6
= 0.0768 or 7.68%
The next step is to calculate the Plowback ratio
b = 1-dividend payout ratio
b = 1-0.3
b = 0.7
Therefore, the sustainable growth rate can be calculated as follows
= ROE×b/(1-(ROE×b)
= 0.0768×0.7/(1-(0.0768×0.7)
= 0.05376/(1-0.05376)
= 0.05376/0.94624
= 0.05681
= 5.68%
Hence the sustainable rate of growth is 5.68%
Obama Company sells its product for $25 per unit. During 2012, it produced 20,000 units and sold 15,000 units (there was no beginning inventory). Costs per unit are: direct materials $5, direct labour $4, and variable overhead $3. Fixed costs are: $300,000 manufacturing overhead, and $50,000 selling and administrative expenses. The per unit manufacturing cost under variable costing is
a) $12.
b) $27.
c) $29.50.
d) $32.
Answer:
Unitary cost= $12
Explanation:
Giving the following information:
direct materials $5
direct labor $4
variable overhead $3
The variable costing method incorporates all variable production costs (direct material, direct labor, and variable overhead) to calculate the product unitary cost.
Unitary cost= 5 + 4 + 3= $12
The per-unit manufacturing cost under variable Unitary cost is = $12
How to Calculate Unitary cost?
Giving the following information as per the question below:
The direct materials are $5
Then direct labor is $4
After that variable overhead is $3
Then The variable costing method incorporates all variable production costs (direct material, direct labor, and also variable overhead) to calculate the product unitary cost.
Therefore, The Unitary cost is = 5 + 4 + 3= $12
Find out more information about Unitary cost here:
https://brainly.com/question/26388159