A. Ernest Rutherford was a physicist from New Zealand. He was one of the most important physicists of the 20th century. He was born on August 30, 1871, in Brightwater, New Zealand, and died on October 19, 1937, in Cambridge, England.
B. Rutherford designed an experiment that would allow him to study the inner workings of the atom more closely. He directed a stream of alpha particles, which are positively charged particles with a mass of four atomic units, at a thin sheet of gold foil, as part of his famous alpha particle scattering experiment. The majority of the alpha particles passed directly through the foil, according to Rutherford's calculations. A few of them were deflected at different angles, and a few of them were deflected back toward the alpha particle source.
C. Rutherford discovered that most of the alpha particles pass straight through the atom, which indicates that the nucleus is extremely small and dense. In reality, the nucleus is less than one trillionth the size of the whole atom. The gold foil experiment discovered that the atom was mostly empty space and that the majority of its mass was concentrated in the nucleus, which was discovered later.
Rutherford was the first to suggest that the nucleus was positively charged and contained most of the atom's mass. Electrons were orbiting the nucleus in a non-random, structured manner, according to his model. As a result, the atom has a planetary system of electrons orbiting the nucleus in orbits.
D. Rutherford's model of the atom was based on the planetary model of the atom. The nucleus, which is composed of positively charged protons and neutrally charged neutrons, is at the center of the atom. Electrons, which are negatively charged particles, orbit the nucleus in three-dimensional orbits at high speeds. The atom's volume is mostly empty space, and its mass is mostly concentrated in the nucleus, according to Rutherford's model.
E. In Thomson's Plum Pudding Model of the Atom, electrons were distributed uniformly throughout the atom, and the positive charge was uniformly dispersed in the form of a 'pudding.' Rutherford's Gold Foil Experiment discovered that most of the alpha particles pass directly through the atom, indicating that the atom is mostly empty space and that the majority of its mass is concentrated in the nucleus, which was discovered later.
The Plum Pudding Model of the Atom was overturned by Rutherford's model, which replaced it with the planetary model of the atom. Rutherford's model was more comprehensive and accurate than Thomson's because it included the presence of a dense, positively charged nucleus.
To know more about Rutherford visit-
brainly.com/question/4593249
#SPJ11
Raoult's Law Let us consider a liquid mixture of two volatile compounds, A and B. Since they're both volatile, that means they should not dissociate when they mix (dissociated compounds and ions have very low vapor pressures). This means that for our analysis, we can assume that volatile compounds will be molecular and have a van't Hoff factor of 1 exactly. Each will have a particular pure substance vapor pressure at our temperature. The vapor pressure for pure A at the current temperature: P ∘
A
=100mmHg The vapor pressure for pure B at the current temperature: P ∘
A
=200mmHg And for each substance, we can find its partial vapor pressure in a mixture using the equation P X
=χ X
⋅P ∘
X
That is to say, the vapor pressure of A above the mixture is proportional to the amount of A in the mixture. Remember that the total pressure of vapor above a mixture would be the sum of the partial pressures of the components: P total
=P A
+P B
Consider the following questions. 1. For a mixture that is 1.0 mols of A and 0.0 mols B, compute a. The mole fraction of A. b. The partial pressure of A. c. The mole fraction of B. d. The partial pressure of B. e. The total pressure of vapor above the solution. 2. For a mixture that is 0.75mols of A and 0.25molsB, compute a. The mole fraction of A. b. The partial pressure of A. c. The mole fraction of B. d. The partial pressure of B. e. The total pressure of vapor above the solution. 3. For a mixture that is 0.50 mols of A and 0.50molsB, compute a. The mole fraction of A. b. The partial pressure of A. c. The mole fraction of B. d. The partial pressure of B. e. The total pressure of vapor above the solution.
1. Mixture: 1.0 mol A, 0.0 mol B a. A: mole fraction = 1.0, b. A: partial pressure = 100 mmHg, c. B: mole fraction = 0, d. B: partial pressure = 0, and e. Total pressure = 100 mmHg
2. Mixture: 0.75 mol A, 0.25 mol B. a. A: mole fraction = 0.75, b. A: partial pressure = 75 mmHg, c. B: mole fraction = 0.25, d. B: partial pressure = 50 mmHg, and e. Total pressure = 125 mmHg
3. Mixture: 0.50 mol A, 0.50 mol B. a. A: mole fraction = 0.50, b. A: partial pressure = 50 mmHg, c. B: mole fraction = 0.50, d. B: partial pressure = 100 mmHg, and e. Total pressure = 150 mmHg
1. For a mixture that is 1.0 mol of A and 0.0 mol of B:
a. The mole fraction of A:
The mole fraction of A is the ratio of the moles of A to the total moles of the mixture.
Mole fraction of A = Moles of A / Total moles of the mixture = 1.0 mol / (1.0 mol + 0.0 mol) = 1.0
b. The partial pressure of A:
The partial pressure of A can be calculated using Raoult's Law equation:
Partial pressure of A = Mole fraction of A * Pure substance vapor pressure of A
Partial pressure of A = 1.0 * 100 mmHg = 100 mmHg
c. The mole fraction of B:
Since there are no moles of B in the mixture, the mole fraction of B is 0.
d. The partial pressure of B:
Since there are no moles of B in the mixture, the partial pressure of B is 0.
e. The total pressure of vapor above the solution:
The total pressure of vapor above the solution is the sum of the partial pressures of A and B.
Total pressure = Partial pressure of A + Partial pressure of B = 100 mmHg + 0 mmHg = 100 mmHg
2. For a mixture that is 0.75 mol of A and 0.25 mol of B:
a. The mole fraction of A:
Mole fraction of A = 0.75 mol / (0.75 mol + 0.25 mol) = 0.75
b. The partial pressure of A:
Partial pressure of A = 0.75 * 100 mmHg = 75 mmHg
c. The mole fraction of B:
Mole fraction of B = 0.25 mol / (0.75 mol + 0.25 mol) = 0.25
d. The partial pressure of B:
Partial pressure of B = 0.25 * 200 mmHg = 50 mmHg
e. The total pressure of vapor above the solution:
Total pressure = Partial pressure of A + Partial pressure of B = 75 mmHg + 50 mmHg = 125 mmHg
3. For a mixture that is 0.50 mol of A and 0.50 mol of B:
a. The mole fraction of A:
Mole fraction of A = 0.50 mol / (0.50 mol + 0.50 mol) = 0.50
b. The partial pressure of A:
Partial pressure of A = 0.50 * 100 mmHg = 50 mmHg
c. The mole fraction of B:
Mole fraction of B = 0.50 mol / (0.50 mol + 0.50 mol) = 0.50
d. The partial pressure of B:
Partial pressure of B = 0.50 * 200 mmHg = 100 mmHg
e. The total pressure of vapor above the solution:
Total pressure = Partial pressure of A + Partial pressure of B = 50 mmHg + 100 mmHg = 150 mmHg
To learn more about Raoult's Law, Visit:
https://brainly.com/question/10165688
#SPJ11
A chemist adds 0.45L of a 0.0438 mol/L potassium peanganate KMnO4 solution to a reaction flask. Calculate the millimoles of potassium peanganate the chemist has added to the flask. Be sure your answer has the correct number of significant digits.
The chemist has added approximately 19.71 millimoles of potassium permanganate (KMnO₄) to the flask, calculated by multiplying the volume of the solution (0.45 L) by the molarity of the solution (0.0438 mol/L) and converting to millimoles.
To calculate the millimoles of potassium permanganate (KMnO₄) added to the flask, we need to multiply the volume of the solution (in liters) by the molarity of the solution (in moles per liter).
To calculate the millimoles, we can use the following conversion factor:
1 mole = 1000 millimoles
Millimoles of KMnO₄ = Volume (L) × Molarity (mol/L) × 1000 (mmol/mol)
Plugging in the values:
Millimoles of KMnO₄ = 0.45 L × 0.0438 mol/L × 1000 mmol/mol
Millimoles of KMnO₄ = 19.71 mmol (rounded to two decimal places)
Therefore, the chemist has added approximately 19.71 millimoles of potassium permanganate (KMnO₄) to the flask.
To know more about potassium permanganate refer here :
https://brainly.com/question/14571753#
#SPJ11
How
to calculate of 0.05 eq of OsO4 in 4% in 10 ml water
The amount of 0.05 eq of OsO4 in the 4% solution in 10 mL of water is 7.993 grams.
To calculate the amount of 0.05 equivalent (eq) of OsO4 in a 4% solution in 10 mL of water, we need to convert the percentage concentration to grams.
Given:
0.05 eq of OsO44% solutionVolume: 10 mLFirst, we convert the percentage concentration to grams:
4% of 10 mL = (4/100) * 10 mL = 0.4 grams
Since the osmium tetroxide (OsO4) has a molar mass of 254.23 g/mol and we have 0.4 grams, we can calculate the number of moles of OsO4:
Number of moles = Mass / Molar mass = 0.4 g / 254.23 g/mol = 0.001573 mol
Since 0.05 eq of OsO4 is given, we can calculate the molar equivalent mass of OsO4:
Molar equivalent mass = Molar mass / Number of equivalents = 254.23 g/mol / 0.05 eq = 5084.6 g/eq
Finally, we can calculate the amount of 0.05 eq of OsO4 in the 4% solution:
Amount = Number of moles * Molar equivalent mass = 0.001573 mol * 5084.6 g/eq = 7.993 g
Therefore, the amount of 0.05 eq of OsO4 in the 4% solution in 10 mL of water is 7.993 grams.
To learn more about osmium tetroxide, Visit:
https://brainly.com/question/33410219
#SPJ11
Question 10. Please correctly answer the question.
Approximate the Keq given this infoation. For a simple
reaction A->B, the Gis Free Energy (DeltaG) is 3.0
kcal/mol.
Explain your approximation
The approximate value of Keq can be determined using the relationship between ΔG (Free Energy) and Keq. Based on the given information, the approximate value of Keq is 4.5 x 10^6.
The relationship between ΔG and Keq is given by the equation ΔG = -RTln(Keq), where R is the gas constant and T is the temperature. By rearranging this equation and plugging in the value of ΔG as 3.0 kcal/mol, we can solve for Keq. Assuming a standard temperature of 298 K, the approximation of Keq is approximately 4.5 x 10^6.
The approximation of Keq as 4.5 x 10^6 is based on the given ΔG value of 3.0 kcal/mol and the relationship between ΔG and Keq. It provides an estimate of the equilibrium constant for the reaction A -> B under the given conditions.
To know more about Keq click here:
https://brainly.com/question/30884560
#SPJ11
16. A student has a drink spiked at a party. It turns the student green but is not otherwise poisonous. If the k for the drug is 0.0029 min −1
and it obeys first order kinetics. If it takes 4 half-lives for the student to metabolize the drug, when will the student not be green? A. 1.0 hours B. 2.0 hours C. 4.0 hours D. 8.0 hours E. 16 hours
The given value is k = 0.0029 min⁻¹, and the drug obeys first-order kinetics.
If a student has a drink spiked at a party and it turns the student green, but it is not poisonous. If it takes four half-lives for the student to metabolize the drug, we have to determine when the student will not be green.
In a first-order reaction, the rate of the reaction depends on the concentration of a single reactant raised to the power of 1. The integrated rate equation for the first-order reaction is as follows:$$ln\frac{[A]}{[A]_{t}} = kt$$Where[A] represents the concentration of the reactant at a given time.
The half-life formula for a first-order reaction can be calculated as follows:$$t_{1/2} = \frac{0.693}{k}$$We know that the time for four half-lives is equal to 4t1/2. Therefore, we can use the given half-life equation to find out the time required for four half-lives of the drug. The student's body will metabolize the drug, and the student will not be green after four half-lives. Using the given value of k = 0.0029 min⁻¹ and substituting the value of t1/2, we can solve for the time required for four half-lives of the drug. $$t_{1/2} = \frac{0.693}{k}$$$$t_{1/2} = \frac{0.693}{0.0029} = 238.96 \text{min}$$The time required for four half-lives is given by: $$4t_{1/2} = 4 × 238.96 = 955.84 \text{min}$$Converting minutes to hours, $$955.84 \div 60 = 15.93 \text{hrs}$$Therefore, after 15.93 hours, the student will not be green.
It takes around 15.93 hours for the student to stop being green. Therefore, the correct option is E. 16 hours.
To know more about value visit
https://brainly.com/question/30145972
#SPJ11
Be sure to answer all parts. Complete the equations to show how the following compound can be synthesized from cyclopentanol OH (OH Part 1: 22 ?1 oxidize OH OH [1] , diethyl ether (2) H,o CH5 H ?1 view structure MgBr ?2 view structure Part 2 Select all the suitable oxidizing agents for the previous reaction PCC in CH2CI2 H2CrO4 generated from Na2Cr207 in aqueous sulfuric acid H2 and a Pt, Pd, Ni, or Ru catalyst NaBH4 in CH3OH Part 3: ?3, OH , heat CH5 ?3 = PBr3 HBr SOCI2 H2SO4 Part 4 out of 4 OH OH ?4,(ch,)3cooH (CH), СОН , НО 24B2H6 =
The compound can be synthesized from cyclopentanol through oxidation, reaction with diethyl ether, Grignard reaction, and reaction with acetic anhydride.
To synthesize the given compound, cyclopentanol (OH) needs to undergo several reactions.
Oxidation
Cyclopentanol (OH) can be oxidized using a suitable oxidizing agent, such as Jones reagent (CrO3 and H2SO4), to convert the alcohol group (-OH) into a carbonyl group (C=O).
Reaction with diethyl ether
The resulting carbonyl compound can react with diethyl ether (CH3CH2OCH2CH3) in the presence of acid, typically concentrated sulfuric acid (H2SO4), to form an acetal. This reaction is a protecting group strategy that prevents further unwanted reactions on the carbonyl group.
Grignard reaction
The acetal can then undergo a Grignard reaction, where it reacts with an organomagnesium compound (MgBrX, X = halogen) generated from bromobenzene (C6H5Br) and magnesium (Mg). The Grignard reagent attacks the carbonyl carbon, resulting in the formation of an alcohol intermediate.
Reaction with acetic anhydride
The alcohol intermediate can be reacted with acetic anhydride (CH3CO)2O in the presence of a suitable catalyst, such as pyridine (C5H5N), to yield the desired compound. This reaction is an acetylation process that converts the alcohol group (-OH) into an acetate group (-OC(O)CH3).
Learn more about synthesized.
brainly.com/question/29846025
#SPJ11
A student wants to fill a plastic bag with carbon dioxide. The student decides to use the reactants sodium bicarbonate and acetic acid to inflate the bag as shown in the chemical equation below. NaHCO3( s)+CH3COOH(aq)⋯ If a student measured the volume of a plastic bag to be 2.1 liters, how many grams of sodium bicarbonate will need to be added to fill up the bag with gas? Provide your answer and your reasoning.
Approximately 7.9 grams of sodium bicarbonate should be added to fill the plastic bag with carbon dioxide gas, assuming complete reaction and ideal gas behavior.
To determine the amount of sodium bicarbonate (NaHCO3) needed to fill a plastic bag with carbon dioxide gas, we need to consider the stoichiometry of the reaction and the ideal gas law.
The balanced chemical equation for the reaction between sodium bicarbonate and acetic acid is:
NaHCO3(s) + CH3COOH(aq) → CO2(g) + H2O(l) + NaCH3COO(aq)
From the equation, we can see that one mole of sodium bicarbonate produces one mole of carbon dioxide gas (CO2). We can use the ideal gas law to relate the volume of the bag (2.1 liters) to the moles of carbon dioxide gas.
Using the ideal gas law equation PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature, we can rearrange the equation to solve for n (moles):
n = PV / RT
Assuming standard temperature and pressure (STP), where T = 273 K and P = 1 atm, and using the value of R (0.0821 L·atm/mol·K), we can calculate the number of moles of carbon dioxide:
n = (1 atm) * (2.1 L) / (0.0821 L·atm/mol·K * 273 K) ≈ 0.094 moles
Since the stoichiometry of the reaction tells us that one mole of sodium bicarbonate produces one mole of carbon dioxide, the number of moles of sodium bicarbonate needed is also approximately 0.094 moles.
To find the mass of sodium bicarbonate, we need to multiply the number of moles by its molar mass. The molar mass of NaHCO3 is approximately 84.0 g/mol. Therefore, the mass of sodium bicarbonate required is:
Mass = 0.094 moles * 84.0 g/mol ≈ 7.9 grams
To learn more about Sodium Bicarbonate
brainly.com/question/28721969
#SPJ11
The student needs approximately 7.24 grams of sodium bicarbonate to fill up a 2.1-liter plastic bag with carbon dioxide, based on the stoichiometry of the chemical reaction and the molar volume of a gas at Room Temperature and Pressure.
Explanation:To understand the amount of sodium bicarbonate required to fill up a 2.1-liter plastic bag with carbon dioxide, we need to understand the stoichiometry of the chemical reaction. The balanced equation for the reaction is NaHCO3(s) + CH3COOH(aq) → NaCH3COO(aq) + H2O(l) + CO2(g). From this equation, we can see that one mole of sodium bicarbonate (NaHCO3) reacts to produce one mole of carbon dioxide (CO2).
The molar volume of a gas at Room Temperature and Pressure (RTP) is approximately 24.5 liters per mole. Therefore, the volume of carbon dioxide gas (2.1 liters) produced would be equivalent to approximately 0.086 moles (2.1 divided by 24.5).
Since the reaction is 1:1, the same number of moles of sodium bicarbonate is needed, which is 0.086 moles. Given that the molar mass of sodium bicarbonate is approximately 84 grams per mole, the needed mass of sodium bicarbonate is approximately 7.24 grams (0.086 multiplied by 84).
Learn more about Chemical Reactivity here:https://brainly.com/question/33558837
#SPJ6
Which type of PPE is designed to shield or isolate a responder from chemical or biological hazards?
Select one:
a.Chemical-protective clothing (CPC)
b.Flame-resistant protective clothing
c.High temperature-protective clothing
d.Structural firefighters' protective clothing
Chemical-protective clothing (CPC) is designed to shield or isolate a responder from chemical or biological hazards.
Chemical-protective clothing (CPC) is specifically designed to shield or isolate a responder from chemical or biological hazards. It is made of specialized materials that provide a barrier against hazardous substances, preventing them from coming into contact with the wearer's skin or clothing. This type of PPE is essential in situations where there is a risk of exposure to dangerous chemicals or biological agents.
Therefore, option a.Chemical-protective clothing (CPC) is correct.
To learn more about Chemical-protective clothing (CPC), Visit:
https://brainly.com/question/6547716
#SPJ11
Which of the following is a fundamental limitation of Beer's Law? a. The solution must be dilute b. Cells must be matched c. The solution must be at a neutral {pH} d. The solution must be
Beer's Law, also known as the Beer-Lambert Law, is a relationship that explains the linear relationship between the concentration of a solute in a solution and the intensity of light absorbed or transmitted by the solution. A fundamental limitation of Beer's Law is that the solution must be dilute
The Beer-Lambert Law, also known as Beer's Law, is a relationship between the concentration of a solute in a solution and the intensity of light absorbed or transmitted by the solution. The relationship is linear, and it is given as follows:A = ε l c Where:A is the absorbance of the solution.
ε is the molar absorptivity coefficient.l is the path length of the cell.c is the concentration of the solution.In a standard Beer's Law experiment, the concentration of the solute is gradually increased, and the absorbance is measured at each concentration.
A graph of absorbance against concentration is then plotted, and it should be linear. The slope of the graph gives the molar absorptivity coefficient, and the y-intercept gives the path length. However, several limitations come with the application of Beer's Law. Fundamental limitation of Beer's Law
Beer's Law is only applicable to dilute solutions. This means that the concentration of the solute must be such that the solute molecules do not interact with each other. This condition is often expressed as the requirement that the concentration of the solute must be less than 10% of its saturation concentration.
Beyond this concentration, the relationship between absorbance and concentration deviates from linearity. The reason for this deviation is that the solute molecules interact with each other, leading to changes in the optical properties of the solution.
Know more about Beer-Lambert Law here:
https://brainly.com/question/30404288
#SPJ11
Based on what you learned in lecture and in "What's Cooking in the Lab?" about inhibition and the frontal lobe, which of the following individuals would likely do BEST on the Stroop?
Answer:
Please mark me as brainliestExplanation:
The Stroop test is a cognitive task that measures a person's ability to inhibit automatic or prepotent responses. It assesses the ability to selectively attend to relevant information while ignoring irrelevant or interfering information. In this test, participants are typically presented with color words (e.g., "RED," "BLUE") printed in incongruent colors (e.g., the word "RED" printed in blue ink) and are asked to name the color of the ink while suppressing the tendency to read the word.
Based on this information, individuals who have good inhibition abilities and effective functioning of the frontal lobe, which is associated with executive functions like inhibition, may perform better on the Stroop test. The frontal lobe plays a crucial role in inhibitory control and attentional processes.
Therefore, an individual who demonstrates strong inhibitory control and has well-functioning frontal lobes would likely perform best on the Stroop test.
In the periodic table the element uranium is represented by the complete symbol 23892U. Why can it also be represented by the complete symbol 23592U ? 5.2 Give two names for the value 235 and 238 in 6.1. 5.3 Which symbol distinguishes elements from each other in the periodic table, A or N or Z? 5.4 List three places where we would find radioactive substances in everyday life.
The atomic number and mass number of an element in the periodic table tell us how many protons, electrons, and neutrons it has.
Uranium has two isotopes, uranium-235 and uranium-238, represented by their respective mass numbers. Uranium-235 and uranium-238 are both isotopes of uranium, with atomic numbers of 92, which means that each atom of uranium has 92 protons in its nucleus. The reason uranium can be represented by either of the symbols 23892U and 23592U is that both represent isotopes of the same element. The mass number (238 and 235) specifies the number of protons and neutrons in the atom's nucleus. The number 238 and 235 is the mass number of the element uranium, and two names for the mass numbers of uranium-238 and uranium-235 are respectively called uranium-238 and uranium-235.
The symbol that distinguishes elements from one another in the periodic table is the atomic number, or the number of protons present in the nucleus. The atomic number also specifies the chemical properties of an element, such as the number of electrons in its outermost shell. We can find radioactive substances in many places in our everyday life. Some of the common places include smoke detectors, nuclear medicine, and natural sources such as the sun. Additionally, radioactive substances are found in cosmic radiation and radioactive fallout from nuclear weapons testing.
To know more about electrons visit:
brainly.com/question/12001116
#SPJ11
can
someone show me the work on how to get those answers? thank
you
13) 50 {ml}= A) 5 × 10^{2} B) 5 × 10^{3} C) 0.05 (D) 5 × 10^{-2} E) None of the above 14) 665 centiliters = A) 6.65 × 10^{0} B) 6.65 \
The solution to the problem helps one understand the concept and arrive at the solution easily.
The answer is E) None of the above.
13) 50 {ml}= A) 5 × 10^{2} B) 5 × 10^{3} C) 0.05 (D) 5 × 10^{-2} E) None of the above Given, 1 L = 1000 ml To convert 50 ml into liters, divide by 1000.So, 50 ml = 50/1000 L = 0.05 L
Now,
we know that 1 L = 10^3 mL
Thus, 0.05 L = 0.05 x 10^3 mL = 50 mL
The option A) 5 × 10^{2} is incorrect and
option B) 5 × 10^{3} is also incorrect
Option C) 0.05 is the correct answer and
Option D) 5 × 10^{-2} is also correct.
14) 665 centiliters = A) 6.65 × 10^{0} B) 6.65 × 10^{1} C) 6.65 × 10^{2} D) 6.65 × 10^{-1} E)
None of the aboveGiven, 1 L = 100 centiliters.
To convert 665 centiliters into liters, divide by 100.So, 665 centiliters = 665/100 L = 6.65 L
Now, we know that 1 L = 10^2 centiliters
6.65 L = 6.65 x 10^2 centiliters Option C) 6.65 × 10^{2} is the correct answer.
The answer is C) 6.65 × 10^{2}.
To know more about centiliters visit:
https://brainly.com/question/33111254
#SPJ11
Electromagnetic radiation with a wavelength of 660nm appears as
orange light to the human eye. The frequency of this light is ____
Hz.
The electromagnetic radiation with a wavelength of 660nm appears as orange light to the human eye. The frequency of this light is 4.54 x 10¹⁴ Hz.
Electromagnetic radiation is a form of energy that travels through space and matter in the form of a wave. The electric and magnetic fields oscillate at right angles to the direction of motion of the wave. Electromagnetic waves can have varying wavelengths and frequencies, ranging from gamma rays with very short wavelengths and high frequencies to radio waves with long wavelengths and low frequencies.
The distance between successive crests or troughs of a wave is known as the wavelength. The wavelength is usually denoted by the Greek letter lambda (λ).
The wavelength of the orange light is 660nm. To calculate the frequency of the orange light, we use the formula: `c = νλ`Where, `c` is the speed of light in vacuum, `ν` is the frequency of the wave, and `λ` is the wavelength of the wave.
Substituting the values, we get;`3.00 × 10⁸ ms⁻¹ = ν × 660 nm`. Converting the wavelength to meters;`λ = 660 nm = 660 × 10⁻⁹ m`. Therefore,`ν = (3.00 × 10⁸ ms⁻¹) ÷ (660 × 10⁻⁹ m) = 4.54 × 10¹⁴ Hz`.
Therefore, the frequency of the orange light with a wavelength of 660nm is 4.54 x 10¹⁴ Hz.
Learn more about "electromagnetic" :
https://brainly.com/question/1408043
#SPJ11
A sample of copper is put into a graduated cylinder containing 30.0 mL of water. After the copper is put in the graduated cylinder, the water level rises to 36.4 mL. What is the mass of the piece of copper? a. 0.297 g b. 0.30 g c. 1.4 g d. 57 g e. 57.1 g
The correct answer is option B, which is the copper piece weighs 0.30 g, with three significant digits.
The density of the water is 1 g/mL. The volume of water displaced after the copper is put in the cylinder is equal to the volume of the copper that was put into the cylinder. Therefore, the volume of the copper is equal to:
36.4 mL - 30.0 mL = 6.4 mL = 6.4 cm³
The density of copper is 8.96 g/cm³. Therefore, the mass of the copper is equal to the product of its volume and density, which is:6.4 cm³ × 8.96 g/cm³ = 57.344 g
To three significant figures, the mass of the piece of copper is 0.30 g.
Learn more about The volume of water: https://brainly.com/question/17322215
#SPJ11
: Which of the following correctly pairs the ion name with the ion symbol? Select the correct answer below O lodine, I O sulfite, s? O lithitum cation, La O nitride,
The correct pairing of ion name with the ion symbol is "Iodine, I" (Option O lodine, I).
Iodine is represented by the chemical symbol "I." The other options are incorrect:
- Sulfite is represented by the chemical symbol "SO3" and not "S" (Option O sulfite, s).
- Lithium cation is represented by the chemical symbol "Li+" and not "La" (Option O lithitum cation, La).
- Nitride is represented by the chemical symbol "N3-" and not provided as an option.
Therefore, the correct pairing is "Iodine, I."
to know more about ions visit:
https://brainly.com/question/1782326
#SPJ11
(1) Explain why 20.00 mL of 0.025 M Na2S2O3 solution is
equivalent to 20.00 mL of a 4.167 mM KIO3 solution in titration of
dissolved oxygen.
Hence, the molarity of KIO3 is 4.167 mM. Therefore, 20.00 mL of 0.025 M Na2S2O3 solution is equivalent to 20.00 mL of a 4.167 mM KIO3 solution, since both of them have the same number of moles of the reactant.
The titration of dissolved oxygen is carried out through the use of thiosulfate and iodate ions. The reaction between thiosulfate and iodate ion is as follows:5 Na2S2O3 (aq) + 2 KIO3 (aq) + 2 H2SO4 (aq) → 5 Na2SO4 (aq) + K2SO4 (aq) + I2 (aq) + 2 H2O (l)So, 5 moles of thiosulfate react with 2 moles of iodate ion.
Therefore, in order to ensure that the reaction between these two reagents is stoichiometric, the ratio of the concentration of thiosulfate to iodate ion must be 5:2. This ratio is obtained by preparing 0.025 M Na2S2O3 solution. The molarity of iodate ion is calculated from its molecular weight. Molecular weight of KIO3 is 214.00 g/mol. Hence, the molarity of KIO3 is 4.167 mM. Thus, 20.00 mL of 0.025 M Na2S2O3 solution is equivalent to 20.00 mL of a 4.167 mM KIO3 solution, since both of them have the same number of moles of the reactant.
Therefore, this allows us to use either of these two solutions for the titration of dissolved oxygen. In short, in order to ensure that the reaction between these two reagents is stoichiometric, the ratio of the concentration of thiosulfate to iodate ion must be 5:2. This ratio is obtained by preparing 0.025 M Na2S2O3 solution. The molarity of iodate ion is calculated from its molecular weight. Molecular weight of KIO3 is 214.00 g/mol.
To know more about molarity visit:
https://brainly.com/question/2817451
#SPJ11
Construct a model of methane (CH4) and also a model of its mirror image.
Q27: Can the mirror image be superimposed on the original?
Q28: Does methane contain a plane of symmetry?
Q29: Is methane chiral?
Construct a model of chloromethane (CH3Cl) and also a model of its mirror image.
Q30: Can the mirror image be superimposed on the original?
Q31: Does chloromethane contain a plane of symmetry?
Q32: Is chloromethane chiral?
Construct a model of bromochloromethane (CH2BrCl) and also a model of its mirror image.
Q33: Can the mirror image be superimposed on the original?
Q34: Does bromochloromethane contain a plane of symmetry?
Q35: Is bromochloromethane chiral?
Construct a model of bromochlorofluoromethane (CHBrClF) and also a model of its mirror image.
Q36: Can the mirror image be superimposed on the original?
Q37: Does CHBrClF contain a plane of symmetry?
Q38: Is CHBrClF chiral?
Q39: Does CHBrClF contain a stereocentre?
For all the given molecules, the mirror image cannot be superimposed on the original. Methane (CH4) does not contain a plane of symmetry and is not chiral.
Chloromethane (CH3Cl) and bromochloromethane (CH2BrCl) also lack a plane of symmetry and are not chiral. However, bromochlorofluoromethane (CHBrClF) does contain a plane of symmetry and is not chiral.None of these molecules contain a stereocenter.To determine if a molecule and its mirror image are superimposable, we examine their spatial arrangement. If the mirror image can be perfectly overlapped onto the original molecule, they are superimposable. However, if the mirror image cannot be aligned without introducing a different arrangement, they are non-superimposable.
Methane (CH4) consists of a central carbon atom bonded to four hydrogen atoms. It does not contain any asymmetric or chiral centers and does not possess a plane of symmetry. Therefore, its mirror image cannot be superimposed on the original.
Chloromethane (CH3Cl) and bromochloromethane (CH2BrCl) also lack a plane of symmetry. They have tetrahedral structures with no chiral centers, making them achiral. In both cases, the mirror image cannot be superimposed on the original.
However, bromochlorofluoromethane (CHBrClF) does possess a plane of symmetry due to its molecular structure. It is symmetrical and non-chiral. The mirror image can be superimposed on the original, making it achiral.
None of the mentioned molecules contain a stereocenter, which is an atom in a molecule bonded to four different substituents. A stereocenter is a necessary condition for chirality.
Learn more about Methane
brainly.com/question/12645626
#SPJ11
15) A(g)+3B(g)=2C(g) If the initial concentrations are [A]=1.00M,[B]=3.00M, and [C]=0, at equilibrium it is found that [C]=0.980M. Calculate K0 for this reaction.
The equilibrium constant for the given reaction is Kc= (0.00816)2(0.99592) [(2.98376)3] = 7.76 x 10^-3.
The expression for equilibrium constant for the given chemical reaction A(g)+3B(g) --> 2C(g) is as follows: Kc=[C]2[A][B]3To determine Kc, we must first find the equilibrium concentrations of A, B, and C. We are given the initial concentrations of A and B, and it is 0 for C. It is also given that at equilibrium [C]=0.980 M. The changes in concentration for A and B is -x (since A is being used up) and -3x (since 3 moles of B are being used up), respectively, and the change in concentration of C is +2x (since 2 moles of C are being formed).
Since the initial concentration of A is 1.00 M, its equilibrium concentration is (1.00 - x) M. Similarly, the equilibrium concentration of B is (3.00 - 3x) M. The equilibrium concentration of C is (0 + 2x) M. Therefore, Kc=[C]2[A][B]3= (0.980)2(1.00 - x) [(3.00 - 3x)3]= 1.764 x 10^-2(1 - x)(1 - x) × (3 - x)
Thus, the expression for Kc is: Kc=1.764 x 10^-2(1 - x)^4 (3 - x)We can solve for x from the expression Kc=1.764 x 10^-2(1 - x)^4 (3 - x), which is the same as Kc=(0.980)2(1.00 - x) [(3.00 - 3x)3]. After solving, we obtain the value x = 0.00408 M. Substituting the value of x, the equilibrium concentrations of A, B, and C are:[A] = 1.00 - 0.00408 = 0.99592 M[B] = 3.00 - 3(0.00408) = 2.98376 M[C] = 0 + 2(0.00408) = 0.00816 M.
To know more about equilibrium visit:
https://brainly.com/question/30694482
#SPJ11
Enter the number of electrons in each energy level (shell) for each of the elements. If the energy level does not contain any electrons, enter a 0 . It may help to refer to the periodic table. H: n=1 n=2 ค 4 Ca: n=1 n=2 n=3 What is the neutral atom that has its finst two energy levels filled, has 8 electrons in its third energy level, and has no other electrons? Enter the name of the element, not the areviation. clement name:
The number of electrons in each energy level (shell) for each of the elements is as follows: Hydrogen (H):Electron configuration for hydrogen, an element with one electron, is:
1s1 Energy level n=1 has one electron, and energy level n=2 has zero electrons. Thus, the number of electrons in each energy level (shell) for hydrogen is 1, 0.Calcium (Ca): The electron configuration of calcium, an element with 20 electrons, is: Energy level n=1 has two electrons, energy level n=2 has eight electrons, and energy level n=3 has two electrons.
Thus, the number of electrons in each energy level (shell) for calcium is 2, 8, 2.The neutral atom that has its first two energy levels filled, has 8 electrons in its third energy level, and has no other electrons is the element Oxygen (O).
The electron configuration of the neutral oxygen atom, which has eight electrons, is:1s22s22p4The first energy level has two electrons, the second energy level has six electrons, and the third energy level has zero electrons. Therefore, there are 2, 6, 0 electrons in each energy level (shell) for neutral oxygen atom.
To know more about Hydrogen visit:
brainly.com/question/30623765
#SPJ11
Transform the 3s, 3p, and all 3d orbitals under D 2h symmetry
and give the Mullikin symbol for the
resultant irreducible representation for each
The 3s orbital transforms as the A1g irreducible representation "a1g." The 3p orbitals transform as follows: (Mulliken symbol: "b1u"), 3py as B2u (Mulliken symbol: "b2u"), and 3pz as A2u (Mulliken symbol: "a2u"). 3dxy as B3g (Mulliken symbol: "b3g"), 3dyz as B2g (Mulliken symbol: "b2g"), 3dz² as A1g (Mulliken symbol: "a1g"), 3dxz as B1g (Mulliken symbol: "b1g"), and 3dx²-y² as Eg (Mulliken symbol: "eg").
Under D2h symmetry, the irreducible representations of the 3s, 3p, and 3d orbitals can be determined using character tables for the D2h point group. Here are the transformations and the corresponding Mulliken symbols for each orbital:
3s orbital:
Under D2h symmetry, the 3s orbital transforms as the A1g irreducible representation.
Mulliken symbol: a1g
3p orbitals:
The 3p orbitals consist of three mutually perpendicular orbitals: 3px, 3py, and 3pz. Each of them transforms differently under D2h symmetry.
3px orbital:
Under D2h symmetry, the 3px orbital transforms as the B1u irreducible representation.
Mulliken symbol: b1u
3py orbital:
Under D2h symmetry, the 3py orbital transforms as the B2u irreducible representation.
Mulliken symbol: b2u
3pz orbital:
Under D2h symmetry, the 3pz orbital transforms as the A2u irreducible representation.
Mulliken symbol: a2u
3d orbitals:
The 3d orbitals consist of five orbitals: 3dxy, 3dyz, 3dz², 3dxz, and 3dx²-y². Each of them transforms differently under D2h symmetry.
3dxy orbital:
Under D2h symmetry, the 3dxy orbital transforms as the B3g irreducible representation.
Mulliken symbol: b3g
3dyz orbital:
Under D2h symmetry, the 3dyz orbital transforms as the B2g irreducible representation.
Mulliken symbol: b2g
3dz^2 orbital:
Under D2h symmetry, the 3dz^2 orbital transforms as the A1g irreducible representation.
Mulliken symbol: a1g
3dxz orbital:
Under D2h symmetry, the 3dxz orbital transforms as the B1g irreducible representation.
Mulliken symbol: b1g
3dx²-y² orbital:
Under D2h symmetry, the 3dx²-y² orbital transforms as the Eg irreducible representation.
Mulliken symbol: eg
These are the transformations and the Mulliken symbols for the 3s, 3p, and 3d orbitals under D2h symmetry.
To know more about orbitals:
https://brainly.com/question/30892153
#SPJ4
A 10. 0 ml sample of vinegar, which contains acetic acid, is titrated with 0. 5 m naoh, and 15. 6 ml is required to reach the equivalence point. What is the molarity of the acetic acid?.
The molarity of the acetic acid in the vinegar is calculated to be 0.78 M (or 0.78 mol/L) using the volume of NaOH required and the stoichiometry of the balanced equation.
To determine the molarity of acetic acid in the vinegar sample, we can use the concept of stoichiometry and the volume of NaOH required to reach the equivalence point.
First, we need to determine the number of moles of NaOH used in the titration. The equation for the reaction between acetic acid (CH3COOH) and sodium hydroxide (NaOH) is:
CH3COOH + NaOH → CH3COONa + H2O
From the balanced equation, we can see that one mole of acetic acid reacts with one mole of sodium hydroxide.
The number of moles of NaOH used can be calculated using the formula:
moles of NaOH = Molarity of NaOH × Volume of NaOH (in liters)
Given that the volume of NaOH required is 15.6 ml and the molarity of NaOH is 0.5 M, we can convert the volume to liters:
Volume of NaOH = 15.6 ml = 15.6 × 10^-3 L
Now, we can calculate the moles of NaOH:
moles of NaOH = 0.5 M × 15.6 × 10^-3 L = 7.8 × 10^-3 moles
Since the reaction is 1:1 between acetic acid and NaOH, the moles of NaOH used is equal to the moles of acetic acid in the sample.
Therefore, the molarity of acetic acid can be calculated as:
Molarity of acetic acid = Moles of acetic acid / Volume of vinegar (in liters)
The volume of vinegar is given as 10.0 ml, which can be converted to liters:
Volume of vinegar = 10.0 ml = 10.0 × 10^-3 L
Finally, we can calculate the molarity of acetic acid:
Molarity of acetic acid = (7.8 × 10^-3 moles) / (10.0 × 10^-3 L) = 0.78 M
Therefore, the molarity of the acetic acid in the vinegar sample is 0.78 M.
Learn more about Acetic acid
brainly.com/question/15202177
#SPJ11
Which subatomic particle is gained and lost by the copper atoms?
Copper atoms gain and lose electrons.
Copper atoms gain and lose electrons, which are subatomic particles, when they are oxidized or reduced. Copper is a metal that belongs to the group of transition metals and has the chemical symbol Cu. The atomic number of copper is 29, and it has 29 protons and 29 electrons. Copper has two electrons in its valence shell, which is why it loses them to form Cu+. In addition, it can also gain one electron to form Cu-.When copper is oxidized, it loses one or more electrons, resulting in the formation of copper ions. In contrast, when copper is reduced, it gains one or more electrons, resulting in the formation of copper atoms. The gain and loss of electrons result in the formation of charged particles known as ions. Copper ions are positively charged because they have lost electrons, while copper atoms are neutral because they have an equal number of protons and electrons.
Learn more about Copper atoms
https://brainly.com/question/31604161
#SPJ11
what is the concentration of the iron (iii) ions in solution when 22.0 ml of 0.34 m sodium sulfide reacts with 53.0 ml of 0.22 m iron (iii) nitrate?
The concentration of iron (III) ions in the solution is 0.0705 M.
Finding the Concentration of a SolutionTo determine the concentration of iron (III) ions in the solution, we need to use the stoichiometry of the reaction between sodium sulfide (Na2S) and iron (III) nitrate (Fe(NO3)3) and the volumes and concentrations of the reactants.
The balanced equation for the reaction is:
2 Na2S + 3 Fe(NO3)3 → 6 NaNO3 + Fe2S3
From the equation:
2 moles of sodium sulfide react with 3 moles of iron (III) nitrate to form 1 mole of iron (III) sulfide.
2 moles Na2S + 3 moles Fe(NO3)3 = 1 mole Fe2S3
First, let's calculate the number of moles of sodium sulfide and iron (III) nitrate used in the reaction:
Moles of sodium sulfide = volume (in L) × concentration
= 0.022 L × 0.34 mol/L
= 0.00748 mol
Moles of iron (III) nitrate = volume (in L) × concentration
= 0.053 L × 0.22 mol/L
= 0.01166 mol
From the stoichiometry of the reaction, we can see that the mole ratio of sodium sulfide to iron (III) nitrate is 2:3. Therefore, the limiting reagent is sodium sulfide because there are fewer moles of sodium sulfide compared to iron (III) nitrate.
Since 2 moles of sodium sulfide react with 1 mole of iron (III) sulfide, we can calculate the moles of iron (III) sulfide formed:
Moles of iron (III) sulfide = (0.00748 mol Na2S) × (1 mol Fe2S3 / 2 mol Na2S)
= 0.00374 mol
Finally, we can determine the concentration of iron (III) ions (Fe3+) in the solution. Since 1 mole of iron (III) sulfide corresponds to 3 moles of Fe3+ ions, the concentration is:
Concentration of Fe3+ = moles of Fe3+ / volume (in L)
= (0.00374 mol) / (0.053 L)
= 0.0705 M
Therefore, the concentration of iron (III) ions in the solution is 0.0705 M.
Learn more about concentration here:
https://brainly.com/question/26255204
#SPJ4
Hello I wanted to know if I can grt some help with my chemistry
assignment that is die today. Please and thank you.
Select the best statement A) Chemical changes provide the only valid basis for identification of a substance. B) Chemical changes are easily reversed by altering the temperature of the system. C) Chem
Of the following statements, the best statement about chemical changes is: Chemical changes provide the only valid basis for the identification of a substance.
A chemical change, also known as a chemical reaction, involves the transformation of one substance into another. During a chemical reaction, the composition of a substance changes, and the reaction can result in the formation or breakage of chemical bonds. Chemical changes are the only valid basis for identifying a substance, according to the statement. This is because chemical changes can cause drastic changes in the physical and chemical properties of a substance. This transformation is irreversible and cannot be undone by any physical process, such as temperature change. C) Chemical changes provide the only valid basis for the identification of a substance is the best statement about chemical changes.
Learn more about the Chemical change:
https://brainly.com/question/1222323
#SPJ11
The activation energy for the forward reaction is _____.
a
d
c
b
The activation energy for the forward reaction is a (1st option)
How do i determine the activation for the forward reaction?Activation energy is simply defined as the minimum energy required for reaction to occur.
However, for energy profile diagrams, the activation energy is simply the energy difference between the peak energy and the energy of the reactants.
Considering the diagram given, we can see that letter a exist between the peak energy and the energy of the reactant.
Thus, we can conclude from the above information that the activation energy for the forward reaction is a (1st option)
Learn more about activation energy:
https://brainly.com/question/29060218
#SPJ1
Let f(t)=5−2t2. Evaluate f(t+1) f(t+1)=
If function, f(t)=5−2t2 then, f(t+1) = -2t² - 4t + 3.
A function is a relation between a set of inputs and a set of outputs. Each input is associated with exactly one output. The set of inputs is called the domain of the function, and the set of outputs is called the codomain of the function.
A function can be represented in many ways, including:
Set notation: A function can be represented as a set of ordered pairs, where each ordered pair consists of an input and its corresponding output. For example, the function f(x) = x^2 can be represented as the set of ordered pairs {(1, 1), (2, 4), (3, 9), ...}.Formula: A function can also be represented by a formula, which is an expression that defines the output of the function for any given input. For example, the function f(x) = x^2 can be represented by the formula f(x) = x * x.Graph: A function can also be represented by its graph, which is a plot of the points (x, f(x)) for all possible values of x in the domain of the function.Given that f(t) = 5 - 2t². We need to find the value of f(t + 1).
The value of f(t + 1) can be found by replacing t with t + 1 in the function f(t).
That is, f(t + 1) = 5 - 2(t + 1)²f(t + 1)
= 5 - 2(t² + 2t + 1)f(t + 1)
= 5 - 2t² - 4t - 2f(t + 1) = -2t² - 4t + 3
Therefore, f(t + 1) = -2t² - 4t + 3.
To learn more about function :
https://brainly.com/question/11624077
#SPJ11
write the semideveloped foula of:
1.- 2,5 nonadi-ino
2.- 4,5 dietil - 3 metil - 2 octeno
i need the answer like these: (CH3-CH-=CH2-CH it´s only demostrative
Semideveloped formula is a representation of a molecular structure that lies between the fully condensed structural formula and the fully skeletal formula. It shows a partial representation of the connectivity of atoms in a molecule while also indicating certain functional groups or substituents. Here are the semideveloped formulas for the given compounds:
1. 2,5-nonadiyne:
[tex]CH3-CH2-C≡C-CH2-CH2-CH3[/tex]
In this compound, "yne" indicates a triple bond (-C≡C-) between the carbon atoms. The numbers "2,5" indicate the positions of the triple bond in the carbon chain. The methyl (-CH3) groups are shown at the ends of the chain.
2. 4,5-diethyl-3-methyl-2-octene:
[tex]CH3-CH2-CH(CH3)-CH(C2H5)-CH=CH-CH2-CH3[/tex]
In this compound, "ene" indicates a double bond (-CH=CH-) between the carbon atoms. The numbers "4,5" indicate the positions of the double bond in the carbon chain. The ethyl (-CH2CH3) and methyl (-CH3) groups are shown at their respective positions in the chain.
Please note that the semideveloped formulas provided are representations of the structural arrangement of the atoms in the compounds, where the bonds and functional groups are explicitly shown.
To know more about atoms visit :
https://brainly.com/question/1566330
#SPJ11
(a) What gercentage of regutat grade gavelne soid between $3.23 and $3.63 per gassi? x× (b) Whak percentage of regular grade gasolne pold betecen $3.23 and $3.83 per gaton? x+ (c) What serectitage of regular grade gaveine inds for noce than $3.81 per gaiso? x 4
(a) Approximately x% of regular-grade gasoline is sold between $3.23 and $3.63 per gallon. (b) Approximately x+% of regular-grade gasoline is sold between $3.23 and $3.83 per gallon. (c) Approximately x% of regular-grade gasoline is sold for less than $3.81 per gallon.
To calculate the percentage of gasoline sold within a specific price range, we need to determine the proportion of the total range that falls within the given prices.
(a) Price range: $3.23 to $3.63 per gallon
Total range: $3.63 - $3.23 = $0.40 per gallon
Proportion within the range: ($3.63 - $3.23) / ($3.63 - $3.23) = 1
Percentage: 1 × 100% = 100%
(b) Price range: $3.23 to $3.83 per gallon
Total range: $3.83 - $3.23 = $0.60 per gallon
Proportion within the range: ($3.83 - $3.23) / ($3.83 - $3.23) = 1
Percentage: 1 × 100% = 100%
(c) Price limit: $3.81 per gallon
Percentage: 100% - x% (since it is specified that it is "less than" $3.81)
Please note that without specific numerical values for x, we cannot provide the exact percentages. However, the calculations above outline the method to determine the percentages based on the given price ranges.
Learn more about gasoline from the given link
https://brainly.com/question/14588017
#SPJ11.
A feta cheese recipe calls for brining in a solution containing 1.19 cup of coarse salt per quart of solution. Assume that the density of the course salt is 18.2 g / Tbsp. The salt concentration of this brine is _______% (w/v)?
Please record your answer to one decimal place.
The salt concentration of the brine is 3.9% (w/v).
To ascertain the salt convergence of the brackish water as far as percent weight/volume (% w/v), we want to decide the mass of salt in the arrangement and separation it by the volume of the arrangement.
Given:
Coarse salt thickness = 18.2 g/Tbsp.
Brackish water recipe: 1.19 cups of coarse salt per quart of arrangement
To start with, we should switch the given amounts over completely to a steady unit. Since the thickness of coarse salt is given in grams per tablespoon (g/Tbsp), we can switch cups over completely to tablespoons and quarts to milliliters.
1 quart = 4 cups
1 cup = 16 tablespoons
In this way, 1.19 cups of coarse salt = 1.19 x 16 tablespoons = 19.04 tablespoons.
Presently, how about we work out the mass of salt in the brackish water:
Mass of salt = 19.04 tablespoons x 18.2 g/Tbsp
Then, we really want to change over the volume of the arrangement from quarts to milliliters:
1 quart = 946.35 milliliters
At long last, we can work out the salt fixation:
Salt fixation (% w/v) = (mass of salt/volume of arrangement) x 100
Subbing the qualities, we get:
Salt fixation = (19.04 tablespoons x 18.2 g/Tbsp)/(946.35 ml) x 100.
Assessing this articulation will give us the salt fixation in percent weight/volume.
To learn more about brine solution, refer:
https://brainly.com/question/15905226
#SPJ4
Which of the following is/are example(s) of an alkenyl group? ethenyl group phenyl group methylene group more than one correct response no correct response Question 30 1 pts For which of the following halogenated hydrocarons is cis-trans isomerism possible? 1,1-dichloroethene 1,2-dichloroethene 1,2-dichloroethyne more than one correct response no correct response
The ethenyl group is an example of an alkenyl group. Ethene is the simplest member of the alkene series, with the formula C2H4. It has a double bond between the two carbon atoms, which makes it an alkenyl group. Question 30) Correct option is 1,2-dichloroethene.
An alkene is a type of hydrocarbon that has at least one double bond between carbon atoms in its molecule. Alkenes are named using the suffix -ene in the IUPAC nomenclature.The alkenyl group is a subclass of alkenes, which is a hydrocarbon substituent that has a double bond between carbon atoms. Alkenyl groups can be represented by the formula R-CH=CH-, where R is a functional group or a substituent.
The ethenyl group has the formula CH2=CH-, and it is a functional group that is commonly found in organic compounds.The phenyl group is not an alkenyl group. It is an aromatic hydrocarbon substituent that is based on benzene. The phenyl group is represented by the formula C6H5-, and it is often found in organic compounds as a substituent.The methylene group is not an alkenyl group.
It is a functional group that contains a carbon atom that is double-bonded to an oxygen atom. The methylene group has the formula CH2=, and it is often found in organic compounds as a substituent.Cis-trans isomerism is possible in 1,2-dichloroethene. The molecule has two different possible arrangements of the two chlorine atoms with respect to the double bond, resulting in cis-trans isomers.
Therefore, the correct option is option B, 1,2-dichloroethene. The other options do not have a double bond or have symmetrical structures that do not allow for cis-trans isomerism.
To know more about Alkenyl visit-
brainly.com/question/33427675
#SPJ11