choose the correct answer.
1 attac
Which substance will not conduct electricity?
A aluminium
B copper
C plastic
D steel
ОА. А

Answers

Answer 1

Explanation:

Covalent compounds (solid, liquid, solution) do not conduct electricity. Metal elements and carbon (graphite) are conductors of electricity but non-metal elements are insulators of electricity. Ionic bonds are the electrostatic attraction between positive and negative ions.

Hope its useful... :-)

Brainliest plz


Related Questions

How do atmospheric updrafts affect clouds?

Answers

Answer:

Updrafts characterize a storm's early development, during which warm air rises to the level where condensation begins and precipitation starts to develop. In a mature storm, updrafts are present alongside downdrafts caused by cooling and by falling precipitation.

Hope it helps  

Have a great Day : P

Which of the following would cause entropy to decrease?
A. CO2(g) → C02()
B. CO2(s) + CO2()
C. CO2() + CO2(9)
D. CO2(s) → C02(9)

Answers

The change that would cause entropy to decrease is CO2 gas changing to solid:

CO2(g) → C02(s)

What is entropy?

Entropy refers to the degree of randomness of a substance.

The higher the degree of randomness the higher the entropy value of that substance.

Entropy increases with increase in temperature as particles of substances gain more kinetic energy.

However, lowering temperature decreases entropy values.

The change from gas to liquid or solid involves lowering of temperature.

Therefore, the change that would cause entropy to decrease is CO2 gas changing to solid.

Learn more about entropy at: https://brainly.com/question/419265

Which type of galaxy contains mostly new stars because it has lots
of dust and gas

Answers

Spiral galaxies .........

UGRENT! Please help showing all work

Answers

Answer:

a. The limiting reactant is Ca(OH)₂

b. The theoretical yield of CaCl₂ is approximately 621.488 grams

c. The percentage yield of CaCl₂ is approximately 47.06%

Explanation:

a. The given chemical reaction is presented as follows;

Ca(OH)₂ + 2HCl → CaCl₂ + 2H₂O

Therefore;

One mole of Ca(OH)₂ reacts with two moles of HCl to produce one mole of CaCl₂ and two moles of water H₂O

The mass of HCl in an experiment, m₁ = 229.70 g

The mass of Ca(OH)₂ in an experiment, m₂ = 207.48 g

The molar mass of HCl, MM₁ = 36.458 g/mol

The molar mass of Ca(OH)₂, MM₂ =74.093 g/mol

The number of moles of HCl, present, n₁ = m₁/MM₁

∴ n₁ = m₁/MM₁ = 229.70 g/(36.458 g/mol) ≈ 6.3 moles

The number of moles of Ca(OH)₂, present, n₂ = m₂/MM₂

∴ n₂ = m₂/MM₂ = 207.48 g/(74.093 g/mol) ≈ 2.8 moles

The number of moles of Ca(OH)₂, present, n₂ = 2.8 moles

According the chemical reaction equation the number of moles of HCl the 2.8 moles of Ca(OH)₂ will react with, = 2.8 × 2 moles = 5.6 moles of HCl

Therefore, there is an excess HCl in the reaction and Ca(OH)₂ is the limiting reactant

b. According the chemical reaction equation the number of moles of CaCl₂ produced in he reaction by the 2.8 moles of Ca(OH)₂ = 2.8 × 2 moles = 5.6 moles of CaCl₂

The molar mass of CaCl₂ = 110.98 g/mol

The mass of the 5.6 moles of CaCl₂ = 5.6 moles × 110.98 g/mol ≈ 621.488 grams

The theoretical yield of CaCl₂ ≈ 621.488 grams

c. Given that the actual mass of CaCl₂ produced = 292.5 grams, we have;

The percentage yield of CaCl₂ = The actual yield/(The theoretical yield) × 100

∴ The percentage yield of CaCl₂ = (292.5 g)/(621.488 g) × 100 ≈ 47.0644646397%

The percentage yield of CaCl₂ ≈ 47.06%.

what are the affects of increasing thermal energy B

Answers

Answer:

The molecules tend to speed up and move faster throughout the substance once thermal energy increases. This is evident whenever we heat up water as its molecules tend to move faster throughout the water as thermal energy tends to increase

Hope this helps!

Plz answer will give BRAINLIEST! Promise! Question is in picture! Due in 5 minutes!!

Answers

Answer:

try A

Explanation:

¿Cuántos gramos de dicloruro de manganeso se obtienen cuando reaccionan 7,5 g de ácido clorhídrico? MnO2 + 4 HCl = Mn Cl2 + Cl2 + 2 H2O *

Answers

Answer:

6.6 g

Explanation:

La ecuación de la reacción es;

MnO2 + 4 HCl -------> MnCl2 + Cl2 + 2H2O

Número de moles de HCl que reaccionan = 7.5g / 36.5 g / mol = 0.21 moles

Dado que;

4 moles de HCl producen 1 mol de MnCl2

0,21 moles de HCl producen 0,21 * 1/4 = 0,0525 moles de MnCl2.

Masa de MnCl2 = 125,844 g / mol * 0,0525 moles = 6.6 g

How many moles are in 3.0g of A1203?

Answers

Answer:

0.065 moles

Explanation:

The job of the ______ is to hold all of the parts of a cell together

Answers

Answer:

cell membrane

Explanation:

it holds everything together

(15 POINTS) arrange the conversion factors in order as displayed in the pic

Answers

Answer:

3,1,2

Explanation:

3 bc u go get liters

1 because ur going from C3H8 to CO2

2 because ur getting CO2 liters

Describe the effect of cooling a gas in a container?

Answers

Answer:

By cooling the gas in the container the partial pressure of the gas will cause the gas to condense.  Imagine water vapor in a bottle if you cool it down it will condense into droplets as the molecules of gas start to slow down to to lower temp

Explanation:

A tank consists of a gaseous mixture of 3.83 g of triselenium diiodide, 2.62 g of ammonium telluride, and 1.82 g of iridium (i) sulfate. What is the partial pressure in atm of ammonium telluride if the total pressure in the tank is 2.795 atm?

Answers

Answer: The partial pressure in atm of ammonium telluride is 1.48 atm

Explanation:

According to Raoult's law, the partail pressure of a component at a given temperature is equal to the mole fraction of that component multiplied by the total pressure

[tex]p_A=x\times p_{total}[/tex]  

where, x = mole fraction

[tex]p_A[/tex] = partial pressure of A

[tex]p_{total}[/tex] = total pressure  

[tex]x_{\text {ammonium telluride}}=\frac{\text {moles of ammonium telluride}}{\text {total moles}}[/tex],  

[tex]x_{\text {ammonium telluride}}=\frac{\frac{2.62g}{164g/mol}}{\frac{2.62g}{164g/mol}+\frac{3.83g}{333g/mol}+\frac{1.82g}{673g/mol}}=0.53[/tex]

[tex]p_{\text {ammonium telluride}}=0.53\times 2.795atm=1.481atm[/tex]

Thus the partial pressure in atm of ammonium telluride is 1.48 atm

the question is~ Where does the heat come from for geothermal energy?​

Answers

Answer:

The Earth

Explanation:

Answer:

The Earth

Explanation:

Geothermal energy comes from the sub surface of the Earth. It is contained in the rocks and fluids beneath the earth's crust and can be found as far down to the earth's hot molten rock, magma.

1
What is the mass of 0.328 mol of CO2?

Answers

A practical chemical unit for handling atoms and molecules. Since atoms and molecules are so small, it is impossible to handle and count atoms and molecules individually. Therefore, the Chemists devised a special unit to describe very large number of atoms, ions and molecules and it is called mole and is abbreviated as mol.

Answer:

use this conversation units to help you hope it helps

Pls help fast, I will give brainliest!

Answers

Answer:

c

Explanation:

UGRENT! Please help showing all work

Answers

Answer:

a. Oxygen

b. 20.39g of Al₂O₃

c. 87%

Explanation:

In order to produce 2moles of Al₂O₃, we need to make react 4 moles of Al, to 3 moles of O₂.

We determine the limiting reactant with the moles of each:

12.98g / 26.98g/mol = 0.481 moles of Al

9.6g / 32g/mol = 0.300 moles of oxygen

4 moles of Al react to 3 moles of O₂

Then, 0.481 mol may react to (0.481 . 3)/4 = 0.361 moles

We only have 0.300 moles of O₂ and we need 0.361. Oxygen is the limiting reactant.

So 3 moles of O₂ can produce 2 moles of Al₂O₃

Our 0.300 moles may produce (0.300 . 2) / 3 = 0.200 mol

Our theoretical yield is: 0.2 mol . 101.96g/ mol = 20.39 g

To determine the percent yield we calculate:

(Produced yield/ Thoeretical yield) . 100 → (17.74 /20.39) . 100 = 87%

What is the pH of 0.12M HNO3

Answers

Answer:

pH= 0.92

Explanation:

HNO3-> H^+ +NO3^-

HNO3 is a strong acid, so it fully dissociates

[HNO3] = 0.12M    [H^+] = 0.12M  

pH= -log[H^+]

pH=-log[.12] = 0.92

pH = 0.92

How are the atoms of carbon different from the atoms of nitrogen

Answers

Answer:

Per my research, it was said that each of the atoms of the carbon has over 6 protons, six neutrons, and 6 protons. Each atom of nitrogen has 7 protons, 7 electrons, and 7 neutrons. The atomic mass of carbon and nitrogen is 12 and 14 respectively. As the number of electrons in the atoms of the two elements is different they have different chemical properties.

Explanation:

As you may know, I did my research and this is what it gave me. I would suppose it is correct since it explains that the carob has over 6 protons and so on. Correct me if I am incorrect and I hope this helped. Have a good one!

(っ^▿^)۶٩(˘◡˘ )

PLEASE I NEED YOUR HELP, I WILL GIVE 10 POINTS PLEASEEEEE
People claim these rock formations in the Sahara Desert look like a mushroom and a chicken. They were not sculpted by humans. What do you think caused them to be shaped this way?

Answers

Answer:

Erosion

Explanation:

1.Which type of text structure describes events in sequential order? A.sequence B.Cause and Effect. C. Problem And Solution. D. Compare and Contrast



2.This type of writing considers similarities and differences
A.Discripsion B.Compare and Contrast C. Sequence. D.Cause and Effect


3.in this type of writing,the reader will see words/phrases such as cause,as a result of,and due to.
A.Cause and Effect
B.Promlem and Solution
C.Order And Sequence
D.Compare And Contrast​

Answers

Answer:

1 would be a. sequence

2 would be b. compare and contrast

3 would be a. cause and effect

I need help asap its due today!!!!!

Use the dichotomous key to answer the question. Of the following characteristics, which was used to classify insects?

A. presence of a head

B. shape of wings

C. number of wings

D. shape of abdomen

Answers

Answer:

B. shape of wings

Explanation:

Insect, (class Insecta or Hexapoda), any member of the largest class of the phylum Arthropoda, which is itself the largest of the animal phyla. Insects have segmented bodies, jointed legs, and external skeletons (exoskeletons).

Higher classification: Hexapoda

Maya made this picture to represent a chemical reaction:

Which of the following statements best explains the type of chemical reaction represented by Maya's picture?

It is neither a synthesis reaction nor a decomposition reaction because two reactants form two products.

It represents a decomposition reaction because two reactants break apart and form two products.

It is neither a synthesis reaction nor a decomposition reaction because the total mass of the products is less than the total mass of the reactants.

It represents a synthesis reaction because the same atoms are present in the reactants and products.

Answers

Answer:

It is neither a synthesis reaction nor a decomposition reaction because two reactants form two products.

Explanation:

This reaction would be considered a single replacement reaction.

The chemical reaction involves the products and the reactants. The image is neither synthesis nor decomposition as the two products are formed from two reactants. Thus, option A is correct.

What is a chemical reaction?

A chemical reaction includes the chemical interaction between the reactants to yield the products. In a synthesis reaction, two reactants interact to produce a different molecule or compound.

In a decomposition reaction, a reactant undergoes splitting to produce products and energy. But in the image two reactants produces two products that neither of the reaction shows.

This type of reaction is seen as the single replacement reaction where the more reactive element displaces the less reactive from the compound to form the new molecule.

Therefore, option a. Maya's picture represents a single replacement reaction but not a synthesis or decomposition reaction.

Learn more about the chemical reactions here:

https://brainly.com/question/16099976

#SPJ2

3. You believe that water boils at 212 degrees Fahrenheit (100 degrees Celsius). Write the numberon the scale from best to worst.

1. Your cousin said that he tested the temperature of water boiling and found that it was 100°C.
2. Most people you know believe that water boils at 100°C.
3. You used a thermometer to measure the temperature at which water boiled. You repeated the experiment 3 times. Each time the thermometer read 100°C.
4. You read an article in a science journal from 50 different labs around the world that have tested the temperature of water and found that it boils at 100°C in every location.

Answers

You come across an article in a scientific journal from 50 different laboratories around the globe that measured the boiling point of water and discovered that it is 100°C everywhere.

What transpires when water is heated to 100 C (This is 212 F)?

Water turns into gas around 212°F (100°C), which is the temperature at which it begins to boil (water vapor). Pressure affects the melting/freezing and boiling points. Water's boiling point changes when air pressure changes. The boiling point decreases with increasing altitude or decreasing pressure.

At 212 degrees Fahrenheit, does water boil, or at 100 degrees?

Water has a freezing point of 32 degrees Fahrenheit and a boiling point of 212 degrees Fahrenheit on the Fahrenheit scale.

To know more about laboratories visit:-

https://brainly.com/question/28233400

#SPJ4

how would a map of a galaxy be different from a map of a city?

Answers

Answer:

A map of the galaxy would be a lot bigger and have a lot more names such as planets, stars, etc. While a city would be more basic than a whole galaxy.

PLEASE HELP ME. REAL ANSWERS ONLY PLZ

Answers

Answer:

Please make it full I'm not seeing it

URGENT
What is the total volume of a lead can if it has a mass of 800g.

Answers

Answer:

750

Explanation:

How many grams of NaOH would be required to make 1.0 L of a 1.5 M solution

Answers

60 grams are required.

Hope this helped you!

Pls help match the following

Answers

Answer:

citric acid = orange

I know the answer for this only..

What is the correct order for the development of the atomic model

Answers

Answer: I think it's A. C-A-D-B

Explanation:

John Dalton's theory was publicized in 1803

J.J Thomson's theory was publicized in 1904

Ernest Rutherford's theory was publicized in 1911

And Neil Bohr's was publicized in 1926

2) Liquid soap is dissolve in water to make a soap solution. Why is this
solution called a mixture?​

Answers

Explanation:

Soap solution is called a mixture because you're combining a ratio of liquid soap and water to make a mixture.

Other Questions
what is an example of artificial acquired immunity? Health help!!!!!!!!!!!!! Why do scientists perform multiple trials of the same experiment? Destiny bought a carton of orange juice. She drank 1/3 of the carton on Monday and 5/12 of the carton on Tuesday. What fraction of the carton did Destiny drink?A. 6/12 CartonB. 9/12 CartonC. 6/15 CartonD. 1 Carton Solve for x. 5000(2)^x = 3500(3)^x How do I solve this??? How did the balance of terror keep the world safe? Convert the following temperature units (Hint: K = C +273)A) 50C = __________ KB) 288 K = __________C Problem and solution of Goldilocks and the the three bears Can you help A B C Or D image is here What does Peter mean in the following exchange between Anne and him?A. The situation is worse because Anne is there.B. It doesn't matter one way or the other weather Anne is there.C. He doesn't know weather or not Anne helps the situation.D. The situation is better because Anne is there. can someone pls help me with this TRIG HW; find missing side by using trignometry MUST HELP!!!! (10 POINTS) +BRAINLEST +5 STARS +THANKS ON PROLFILE!!!! create ONE SIMPLE sentence with an absolute phraseThe black cat crossed my path. The cat was scary. Her back was arched. why is the 4th amendment so important ABC measures 140 and is bisectedby BD. What is mDBC= ? Find two integers whose sum is -5 and product is -14 Leaper Corporation uses an activity-based costing system with the following three activity cost pools: Activity Cost Pool Total Activity Fabrication 35,000 machine-hours Order processing 250 orders Other Not applicable The Other activity cost pool is used to accumulate costs of idle capacity and organization-sustaining costs. The company has provided the following data concerning its costs: Wages and salaries $ 380,000 Depreciation 150,000 Occupancy 170,000 Total $ 700,000 The distribution of resource consumption across activity cost pools is given below: Activity Cost Pools Fabrication Order Processing Other Total Wages and salaries 35% 30% 35% 100% Depreciation 15% 45% 40% 100% Occupancy 35% 30% 35% 100% The activity rate for the Order Processing activity cost pool is closest to: what is the product of (4y-y)(9+4x+3y) 90aw - 54ak - 210 yw + 126yk +