Calculate ΔHrxn for the following reaction:CH4(g)+4Cl2(g)→CCl4(g)+4HCl(g)Use the following reactions and given ΔH′s.C(s)+2H2(g)→CH4(g)ΔH=−74.6kJC(s)+2Cl2(g)→CCl4(g)ΔH=−95.7kJH2(g)+Cl2(g)→2HCl(g)ΔH=−184.6kJ

Answer:

In the given case, to get a blue flame, one should open the air inlet further. To increase the size of the flame one should open the gas regulator further. When one opens the air inlet, more amount of oxygen goes within, and thus, one can get a more intense form of blue flame.

When one opens the gas regulator more concentration of gas goes and the larger the size of flame one gets.

To regulate a bunsen burner follow this procedure

To get a blue flame, you should rotate the wheel  of the burner anticlockwise further to reduce the level of oxygen flow.

To increase the size of the flame, you should rotate the wheel clockwise further

The bunsen burner is an apparatus in the laboratory used to carry out experiment when heating of substance is required, hence it is used to add heat to substances, it has a wheel used to regulate the flow of air which is required for combustion, it has a hose which is used to tap gas to the burner

Learn more:

https://brainly.com/question/21641416

Answer:

0.54M of Ba(OH)2

Explanation:

When Ba(OH)2 reacts with HCl, BaCl2 and H2O are produced as follows:

Ba(OH)2 + 2HCl → BaCl2 + 2H2O

The remanent hydroxide ion is because not all Ba(OH)2 reacts. Thus, we need to find moles of Ba(OH)2 that doesn't react and moles of Ba(OH)2 that reacts. The ratio between total moles and volume of the Ba(OH)2 solution = 0.050L is the molarity of the original solution

Moles of Ba(OH)2 that doesn't react:

50mL + 150mL = 0.200L * (0.12 mol OH- / L) = 0.024 moles OH-

2 moles of OH- are in 1 mole of Ba(OH)2:

0.024 moles OH- * (1mol Ba(OH)2 / 2 mol OH-) = 0.012 moles Ba(OH)2

Moles of Ba(OH)2 that react:

0.150L * (0.20mol / L) = 0.030 moles HCl

2 moles of HCl react per mole of Ba(OH)2:

0.030 moles HCl * (1mol Ba(OH)2 / 2 mol HCl) = 0.015 moles Ba(OH)2

Total moles:

0.012mol + 0.015mol = 0.027mol Ba(OH)2 in 50mL

0.027mol Ba(OH)2 / 0.0500L =

0.54M of Ba(OH)2

Answer:  The volume occupied at an altitude of 20.0 km is 34.5289 L

Explanation:

Boyle's Law: This law states that pressure is inversely proportional to the volume of the gas at constant temperature and number of moles.

[tex]P\propto \frac{1}{V}[/tex]     (At constant temperature and number of moles)

where,

[tex]P_1[/tex] = initial pressure of gas = 101.325 kPa ( sea level)

[tex]P_2[/tex] = final pressure of gas = 10 kPa

[tex]V_1[/tex] = initial volume of gas = 3.40774 L

[tex]V_2[/tex] = final volume of gas = ?

Now put all the given values in the above equation, we get the final pressure of gas.

[tex]101.325\times 3.40774=10\times V_2[/tex]

[tex]V_2=34.5289L[/tex]

Therefore, the volume occupied at an altitude of 20.0 km is 34.5289 L

Explanation:

C3H8+5O2----->3CO2+4H2O

Answer:

C3H8+5O2----->3CO2+4H2O

Explanation:

Answer:

yes but first he need to check himself

Explanation:

bcoz if he cannot produce a sperm than she might have cheated him and the baby might be of someone other.

Answer: The mole percent of 1-methylcyclohexene was 80.21% and the mole percent of 3-methylcyclohexene was 19.79%. This is because 1-methylcyclohexene is the major product with the more stable carbocation intermediate and 3-methylcyclohexene is the minor product with the less stable carbocation intermediate.

Explanation: The mole percent of 1-methylcyclohexene was 80.21% and the mole percent of 3-methylcyclohexene was 19.79%

Answer:

NaClO; the contained elements ae Na, Cl, O.

Answer:

no

Explanation:

Answer:

3grams

Explanation:

The reaction for the production of Magnesium dioxide will be

Mg + O2  → MgO

we have 5g of MgO (molar mass 40g)

no of moles of MgO = 5/40 = 0.125

Using unitary method we have

1 mole of Mg require 1 mole of MgO

0.125 Mole of MgO = 0.125mole of Mg

n = given mass /molar mass

0.125 = mass / molar mass

mass = 0.125* 24 = 3grams

Answer:

0.102 M.

Explanation:

From the question given above, the following data were obtained:

Volume of stock solution (V1) = 5 mL

Molarity of stock solution (M1) = 5.103 M

Volume of diluted solution (V2) = 250 mL

Molarity of diluted solution (V2) =?

The molarity of the diluted solution can be obtained by using the dilution formula as illustrated below:

M1V1 = M2V2

5.103 × 5 = M2 × 250

25.515 = M2 × 250

Divide both side by 250

M2 = 25.515 / 250

M2 = 0.102 M

Thus, the molarity of the diluted solution is 0.102 M.

The dilution of the NaOH results in the dilution of the molarity of the solution. The molarity of the final NaOH solution is 0.102 M.

Molarity is the concentration unit that defines the amount of solute present in a liter of solution.

The dilution of the solution results in a change in the molarity. It can be accessed as:

[tex]\rm M_1V_1=M_2V_2[/tex]

The initial molarity of the solution is, [tex]\rm M_1=5.103\;M[/tex]

The initial volume of the NaOH is, [tex]\rm V_1=5\;mL[/tex]

The final volume of the NaOH is, [tex]\rm V_2=250\;mL[/tex]

Substituting the values for the calculation of final molarity, [tex]\rm M_2[/tex]:

[tex]\rm 5.103\;\M\;\times\;5.0\;mL=M_2\;\times\;250\;mL\\\\M_2=\dfrac{5.103\;\M\;\times\;5.0\;mL}{250\;mL} \\\\M_2=0.102\;M[/tex]

The molarity of the NaOH solution after dilution is 0.102 M.

Learn more about molarity, here:

https://brainly.com/question/12127540

Orange is the color of Sodium

Answer:

A and D

Explanation:

Answer:

Mega = 10^6

Milli = 10^-3

Explanation:

Mega is whatever times 10 to 6th power.

Milli is whatever times 10 to the -3rd power.

Answer:

NaCl may be i guess so....

Answer:

6.24 % of FeSO₄

Explanation:

Solute mass: 5.01 g of FeSO₄

Solvent mass: 75.3 g of water

Solution mass = solute mass + solvent mass

5.01 g + 75.3 g = 80.31 g

We can apply a rule of three. Mass percentage means the mass of solute which is contained in 100 g of solution. Then,

In 80.31 g of solution we have 5.01 g of solute

In 100 g solution, we may have (5.01  . 100)/ 80.31 = 6.24 g of solute.

This is the mass percentage: 6.24%

Answer:

C. Alkaline Metal ok thanks

Answer:

a. PbSO4, Ksp = 1.7x10^-8.

Explanation:

Hello!

In this case, since the solubility product indicates how likely a solid is able to ionize and consequently dissolve in water, we can infer that the larger the solubility product Ksp, the more ions are able dissolve in water; therefore the proper answer goes with the largest Ksp, which is a. PbSO4, Ksp = 1.7x10^-8 since the power goes closer to 1 than the other options.

Best regards!

The following are not decomposition reactions :

B. CaO + H2O ⇒ Ca(OH)2

C. 2Mg + O2 ⇒ 2MgO

The decomposition reaction is a chemical reaction shows the decomposition  of a compound into its constituent elements or compounds

General formula :

AB⇒A+B

A. KCIO3 → KCI + O2

decomposition reaction

B. CaO + H2O ⇒ Ca(OH)2

synthesis/combination reaction

C. 2Mg + O2 ⇒ 2MgO

synthesis/combination reaction

D. 2NaOH ⇒ Na2O + H2O

decomposition reaction

Answer:

Cell

Explanation:

I just passed this unit a month ago.

Answer:

It is 6. Cell

Explanation:

Cells make up the smallest level of a living organism such as yourself and other living things. The cellular level of an organism is where the metabolic processes occur that keep the organism alive. That is why the cell is called the fundamental unit of life.

I really hope this helped. God bless you and have a great day! :-)

Answer:

Number of atoms in 1.4 mol of Phosphorus trifluoride (PF₃) : 8.428 x 10²³

The mole is the number of particles(molecules, atoms, ions) contained in a substance  

1 mol = 6.02.10²³ particles

Can be formulated

N=n x No

N = number of particles

n = mol

No = Avogadro's = 6.02.10²³

1.4 mol of Phosphorus trifluoride (PF₃), number of atoms :

[tex]\tt N=1.4\times 6.02\times 10^{23}\\\\N=8.428\times 10^{23}[/tex]

Answer:

I play!!!!!!!!

Explanation:

Answer:

OB: weathering

Explanation:

the cycle of heating and cooling causes stresses called thermal fatigue, this causes the material to break down. In hand, weathering is a physical and chemical process that causes rocks and minerals on the Earth's surface to break down and decompose. Therefore, this matches the process you have described.

Answer:

weathering fun way to imagen it: just imagen u saw ur worst enemie and pretende it is the rock and the wind and ice and water are ur best friends THEN BAM wind and ice and water(ur best friends) make the rock(worst enemie) to dust :D

Answer:

17.94 g

Explanation:

Answer:

Cu3 (PO4)2 contains a total of 2 atoms of phosphorus in just one molecule. (2.10 mol)(6.02214 x 10^23 atoms / mol)(2 phosphorous) = 2.53 x 10^24 atoms of phosphorous per molecule of copper i

Explanation:

Answer:

an element.

Explanation:

it is the purest form

Answer:

b

Explanation:

Answer:

a. 167 mL b. 39.27 %

Explanation:

a. From the chemical equation. 2 mole of Al reacts with 3 mole H₂SO₄ to produce 1 mol  Al₂(SO₄)₃.

Now, we calculate the number of moles of Al in 45.0 g Al.

We know number of moles, n = m/M where m = mass of Al = 45.0 g and M = molar mass of Al = 26.98 g/mol.

So n = 45.0 g/26.98 g/mol = 1.668 mol

Since 2 mole of Al reacts with 3 mole H₂SO₄, then 1.668 mole of Al reacts with x mole H₂SO₄. So, x = 3 × 1.668/2 mol = 2.5 mol

So, we have 2.5 mol H₂SO₄.

Now number of moles of H₂SO₄, n = CV where C = concentration of H₂SO₄ = 15.0 M = 15.0 mol/L and V = volume of H₂SO₄.

V = n/C

= 2.5 mol/15.0 mol/L

= 0.167 L

= 167 mL of 15.0 M H₂SO₄ reacts with 45.0 g Al to produce aluminum sulfate.

b. From the chemical reaction, 2 mol Al produces 1 mol Al₂(SO₄)₃

Therefore 1.668 mol Al will produce x mol  Al₂(SO₄)₃. So, x = 1 mol × 1.668 mol/2 mol = 0.834 mol

So, we need to find the mass of 0.834 mol  Al₂(SO₄)₃. Now molar mass  Al₂(SO₄)₃ = 2 × 26.98 g/mol + 3 × 32 g/mol + 4 × 3 × 16 g/mol = 53.96 g/mol + 96 g/mol + 192 g/mol = 341.96 g/mol.

Also number of moles of  Al₂(SO₄)₃, n = mass of  Al₂(SO₄)₃,m/molar mass  Al₂(SO₄)₃, M

n =m/M

So, m = nM = 0.834 mol × 341.96 g/mol = 285.2 g

% yield = Actual yield/theoretical yield × 100 %

Actual yield = 112 g, /theoretical yield = 285.2 g

So, % yield = 112 g/285.2 g × 100 %

= 0.3927 × 100 %

=  39.27 %

The volume (mL) of 15.0 M sulfuric acid needed to react with 45.0 g of aluminum is 166mL and % yield of the reaction is 39.46%.

Moles of any substance will be calculated by using the below formula as:
n = W/M, where

W = given mass

M = molar mass

Given chemical reaction is :

2Al(s) + 3H₂SO₄(aq) → Al₂(SO₄)₃(aq) + 3H₂(g)

Moles of 45g of Al will be calculated as:

n = 45g / 27g/mol = 1.66 mole

From the stoichiometry of the reaction, it is clear that:

1.66 moles of Al = react with 3/2×1.66=2.49 moles of H₂SO₄

By using the formula of molarity we can calculate the volume of H₂SO₄ as:

M = n/V

V = (2.49) / (15) = 0.166L = 166mL

Again from the stoichiometry it is clear that:
1.66 moles of Al = produces 1/2×1.66= 0.83 moles of Al₂(SO₄)₃

Mass of 0.83 moles of Al₂(SO₄)₃ = (0.83mol)(341.96g/mol) = 283.82 g

Given actual yield of Al₂(SO₄)₃ = 112g

% yield will be calculated as:

Percent yield = (Actual yield/Theoretical yield) × 100

% yield = (112/283.82) × 100 = 39.46%

Hence required values are discussed above.

To know more about percent yield, visit the below link:

https://brainly.com/question/8638404

Answer:

Following are the solution to this question:

Explanation:

[tex]\to HCl \ mol = \frac{23.1 \ g}{36.5 \frac{g}{mol}} = 0.633 \ mole\\\\\\\to HCl \ molarity = \frac{ 0.633 \ mole }{1.25 L} \\\\[/tex]

                            [tex]=0.5064 \ m[/tex]

 [tex]HCl +H_2O \longrightarrow H_3O^{+} + Cl^{-}\\\\\\[/tex]

[tex][H_3O^{+}] =[HCl] \\\\\to [H_3O^{+}] =0.5064 \ m \\\\\to PH =-\log [H_3O^{+}] \\\\[/tex]

          [tex]= -\log (0.5064)\\\\= 0.295 \\\\=0.3[/tex]