Butyl butyrate is an ester that is a naturally occurring oil used in the flavor industry for its fruity scent. If the steam distillation of butyl butyrate with water has partial pressures of 50 mm Hg and 710 mm Hg respectively, how much of the distillate is water

Answer:

a) 101%

b)59.7%

Explanation:

The equation for the thermal decomposition of baking soda is shown;

2NaHCO3 → Na2CO3 + H2O + CO2

Number of moles of baking soda= mass/molar mass= 1.555g/84.007 g/mol = 0.0185 moles

From the reaction equation;

2 moles of baking soda yields 1 mole of sodium carbonate

0.0185 moles of baking soda will yield = 0.0185 moles ×1 /2 = 9.25 ×10^-3 moles of sodium carbonate.

Therefore, mass of sodium carbonate= 9.25 ×10^-3 moles × 106gmol-1= 0.9805 g of sodium carbonate. This is the theoretical yield of sodium carbonate.

%yield = actual yield/theoretical yield ×100

% yield = 0.991/0.9805 ×100

%yield = 101%

Since ;

2NaHCO3 → Na2CO3 + H2O + CO2

And H2O + CO2 ---> H2CO3

Hence I can write, 2NaHCO3 → Na2CO3 + H2CO3

Molar mass of H2CO3= 62.03 gmol-1

Molar mass of baking soda= 84 gmol-1

Therefore, mass of baking soda=

0.325/62.03 × 2 × 84 = 0.88 g of NaHCO3

% of NaHCO3= 0.88/1.473 × 100 = 59.7%

The decomposition reaction of baking soda is a reaction in which water and carbon dioxide ae given off as gaseous products.

Reasons:

Mass of baking soda = 1.555 g

Mass of Na₂CO₃ produced = 0.991 g

Required:

Calculation for the theoretical yield

Solution:

Theoretical yield (mass) of Na₂CO₃ produced is found as follows;

Molar mass of Na₂CO₃ = 105.9888 g/mol

Molar mass of NaHCO₃ = 84.007 g/mol

[tex]\displaystyle 1.555 \, g \, NaHCO_3 \times \frac{1 \, mol \, NaHCO_3}{84.007 \, g \, NaHCO_3} \times \frac{1 \, mol \, Na_2CO_3}{2 \, mol \, NaHCO_3} \times 105.9888 \ g \approx 0.9809 \, g \, Na_2CO_3[/tex]

The theoretical yield of Na₂CO₃ ≈ 0.9809 grams.

The percentage yield is given as follows;

[tex]\displaystyle Percentage \ yield = \mathbf{\frac{Actual \, Yield}{Theorectical \, Yield} \times 100 \%}[/tex]

The percentage yield of Na₂CO₃ is therefore;

[tex]\displaystyle Percentage \ yield \ of \ Na_2CO_3= \frac{0.991}{0.9809} \times 100 \% \approx \underline{ 101.02 \%}[/tex]

(Some baking soda may remain if the reaction is not completed)

6. Mass of the unknown mixture of baking soda = 1473 g

Mass loss from the mixture = 0.325 g

Required:

The percentage of NaHCO₃ in the mixture.

Solution:

The chemical in the mass loss from heating the NaHCO₃ = H₂CO₃

Molar mass of H₂CO₃ = 62.03 g/mol

[tex]\displaystyle \mathrm{Number \ of \ moles \ of \ H_2CO_3 \ produced} = \frac{0.325 \, g}{62.03 \, g/mol} \approx 5.2394 \times 10^{-3} \ moles[/tex]

The chemical reaction is presented as follows;

The number of moles of NaHCO₃ in the mixture is therefore;

Mass of NaHCO₃ in the mixture is therefore

[tex]\displaystyle Percentage \ of \ NaHCO_3 \ in \ the \ mixture \ = \mathbf{ \frac{Mass \ of \ NaHCO_3}{Mass \ of \ mixture} \times 100}[/tex]

Which gives;

Learn more here:

https://brainly.com/question/21091465

Answer:

a. NH₃ : base

CH₃COOH (acetic acid) : acid

NH₄⁺ : conjugate acid

CH₃COO⁻ : conjugate base

b. HClO₄ (perchloric acid) : acid

NH₃ : base

ClO₄⁻ : conjugate base

NH₄⁺ : conjugate acid

Hope this helps.

Answer:

Option B. 0.136 g

Explanation:

The balanced equation for the reaction is given below:

2AgNO3(aq) + 2NaOH(aq) —> Ag2O(s) + 2NaNO3(aq) + H2O(l)

Next, we shall determine the masses of AgNO3 and NaOH that reacted and the mass of Ag2O produced from the balanced equation. This is illustrated below:

Molar mass of AgNO3 = 108 + 14 + (16x3) = 170g/mol

Mass of AgNO3 from the balanced equation = 2 x 170 = 340g

Molar mass of NaOH = 23 + 16 + 1 = 40g/mol

Mass of NaOH from the balanced equation = 2 x 40 = 80g

Molar mass of Ag2O = (108x2) + 16 = 232g/mol

Mass of Ag2O from the balanced equation = 1 x 232 = 232g

Summary:

From the balanced equation above,

340g of AgNO3 reacted with 80g of NaOH to produce 232g of Ag2O.

Next, we shall determine the limiting reactant. This can be obtained as follow:

From the balanced equation above,

340g of AgNO3 reacted with 80g of NaOH.

Therefore, 0.2g of AgNO3 will react with = (0.2 x 80)/340 = 0.047g of NaOH.

From the calculations made above, only 0.047g out of 0.2g of NaOH given, reacted completely with 0.2g of AgNO3. Therefore, AgNO3 is the limiting reactant and NaOH is the excess reactant.

Now, we can calculate the mass of Ag2O produced from the reaction of 0.2g of AgNO3 and 0.2g of NaOH.

In this case, we shall use the limiting reactant because it will produce the maximum yield of Ag2O as all of it is used up in the reaction.

The limi reactant is AgNO3 and the mass of Ag2O produced can be obtained as follow:

From the balanced equation above,

340g of AgNO3 reacted to produce 232g of Ag2O.

Therefore, 0.2g of AgNO3 will react to produce = (0.2 x 232)/340 = 0.136g of Ag2O.

Therefore, 0.136g of Ag2O was produced from the reaction.

Answer:

[tex]3Sr^{+2}+6Cl^{-}+6Li^{+}+2PO_{4}^{3-}-->Sr_{3}(PO_{4})_{2}+6Li^{+}+6Cl^{-}\\\\3Sr^{+2}+2PO_{4}^{3-} --->Sr_{3}(PO_{4})_{2}[/tex]

First equation is the complete ionic equation.

Second equation is the net ionic equation.

Answer:

Option B

Explanation:

Scientific question are answered through experimentation, through testing the theory about the physical world.

Answer: its A

through observing and measuring the physical world

Explanation:

Answer:

550 m/s

Explanation:

The average molecular speed (v) is the speed associated with a group of molecules on average. We can calculate it using the following expression.

[tex]v = \sqrt{\frac{3 \times R \times T}{M} }[/tex]

where,

We can use the info of argon to calculate the temperature for both samples.

[tex]T = \frac{v^{2} \times M}{3 \times R} = \frac{(391m/s)^{2} \times 39.95g/mol}{3 \times 8.314J/k.mol} = 2.45 \times 10^{5} K[/tex]

Now, we can use the same expression to find the average molecular speed in a sample of Ne gas.

[tex]v = \sqrt{\frac{3 \times R \times T}{M} } = \sqrt{\frac{3 \times (8.314J/k.mol) \times 2.45 \times 10^{5}K }{20.18g/mol} } = 550 m/s[/tex]

The question is incomplete as some part is missing:

concentration in octanol Partition Ratio = concentration in water

a) What are the intermolecular forces of attraction between octanol molecules? Explain.

b) Which of the intermolecular forces of attraction identified in (a) account for most of the interactions between octanol molecules? Explain. Use the immiscibility in water and the data included in figures 1 and 2 as evidence to support your answer.

c) Would a compound with a partition coefficient less than one be more hydrophobic or more hydrophilic than one with a partition coefficient greater than 10? Explain.

d) Would nonane (figure 2) be more soluble in water or octanol? Explain.

e) Draw another structure for a compound with the same chemical formula as nonane (CH20) that has a lower boiling point. Explain.

f) Are any of the C atoms in the structure you drew for CH20 sp?hybridized? Explain.

Octanol Boiling point = 195°C Figure 2 Nonane (CH20) Boiling point = 151°C

Answer:

1. The forces between octanol molecules would be attractive. These forces include Vanderwaal forces, H-bonds due to the presence of highly polar O-H group.

2. H-bonding ahould account for most of the attractive forces. The O-H bond should behave like and dipole, oxygen of one molecule attracts the hydrogen of the neighbouring molecule forming D-H...A links throughout (D stands for donor of H-Bond and A for acceptor for H-Bond).

3. Partition coefficient less than 1 will be more hydrophilic, generally drugs with low partition coefficients are regarded as hydrophilic. As parition coefficient of 10 mean more of the solute is dispersed in octanol as compared to water.

4. Nonane is non polar, so it would not dissolve in water. It follows the rule like dissolves like. Polar substances dissolve in polar solvents. 1-octanol is able to bind with water through hydrogen bonds thus its soluble in water but nonane doesn't. Nonane will forms a different layer from water.

5) no all carbons in 2-methyloctane are single bonded. Thus sp3 hybrid. A sp2 hybridised carbon would have a double bond C=C.

Answer:

143pm is the radius of an Al atom

Explanation:

In a face centered cubic structure, FCC, there are 4 atoms per unit cell.

First, you need to obtain the mass of an unit cell using molar mass of Aluminium  and thus, obtain edge length and knowing Edge = √8R you can find the radius, R, of an Al atom.

Mass of an unit cell

As 1 mole of Al weighs 26.98g. 4 atoms of Al weigh:

4 atoms × (1mole / 6.022x10²³atoms) × (26.98g / mole) = 1.792x10⁻²²g

Edge length

As density of aluminium is 2.71g/cm³, the volume of an unit cell is:

1.792x10⁻²²g × (1cm³ / 2.71g) = 6.613x10⁻²³cm³

And the length of an edge of the cell is:

∛6.613x10⁻²³cm³ = 4.044x10⁻⁸cm = 4.044x10⁻¹⁰m

Radius:

As in FCC structure, Edge = √8 R, radius of an atom of Al is:

4.044x10⁻¹⁰m = √8 R

1.430x10⁻¹⁰m = R.

In pm:

1.430x10⁻¹⁰m ₓ (1x10¹²pm / 1m) =

The radius of the atom of Al in the FCC structure has been 143 pm.

The FCC lattice has been contributed with atoms at the edge of the cubic structure.

The FCC has consisted of 4 atoms in a lattice.

[tex]\rm 6.023\;\times\;10^2^3[/tex] atoms = 1 mole

4 atoms = [tex]\rm \dfrac{4}{6.023\;\times\;10^2^3}[/tex] moles

The mass of 1 mole Al has been 26.98 g/mol.

The mass of [tex]\rm \dfrac{4}{6.023\;\times\;10^2^3}[/tex] moles = [tex]\rm \dfrac{4}{6.023\;\times\;10^2^3}[/tex] moles × 26.98 g

The mass of 1 unit cell of Al has been = 1.792 [tex]\rm \bold{\times\;10^-^2^2}[/tex] g.

Density = [tex]\rm \dfrac{mass}{volume}[/tex]

Volume = Density × Mass

The volume of Al unit cell = 2.71 g/[tex]\rm cm^3[/tex] × 1.792 [tex]\rm \times\;10^-^2^2[/tex] g

The volume of Al cell = 6.613 [tex]\rm \times\;10^-^2^3[/tex] [tex]\rm cm^3[/tex]

Volume = [tex]\rm edge\;length^3[/tex]

6.613 [tex]\rm \times\;10^-^2^3[/tex] [tex]\rm cm^3[/tex] = [tex]\rm edge\;length^3[/tex]

Edge length = [tex]\rm \sqrt[3]{6.613\;\times\;10^-^2^3}[/tex] cm

Edge length = 4.044 [tex]\rm \times\;10^-^8[/tex] cm

Edge length = 4.044 [tex]\rm \bold{\times\;10^-^1^0}[/tex] m.

Edge length = [tex]\rm \sqrt{8\;\times\;radius}[/tex]

4.044 [tex]\rm \bold{\times\;10^-^1^0}[/tex] m = [tex]\rm \sqrt{8\;\times\;radius}[/tex]

Radius = 1.430 [tex]\rm \bold{\times\;10^-^1^0}[/tex] m.

1 m = [tex]\rm 10^1^2[/tex] pm

1.430 [tex]\rm \bold{\times\;10^-^1^0}[/tex] m = 143 pm.

The radius of the atom of Al in the FCC structure has been 143 pm.

For more information about the FCC structure, refer to the link:

https://brainly.com/question/14934549

Answer:

Explanation:

We shall find out the molecular formula of the substance .

Ration of number of atoms of C , O and H

= [tex]\frac{37.48}{12} :\frac{49.93}{16} :\frac{12.58}{1}[/tex]

= 3.12 : 3.12 : 12.58

= 1 : 1 : 4

volume of gas at NTP

= 250 x 273 / 350 mL .

= 195 mL .

Molecular weight of the substance = .2804 x 22400 / 195 g

= 32. approx

Let the molecular formula be

(COH₄)n  

n x 32 = 32

n = 1

Molecular formula = COH₄

The compound appears to be CH₃OH

a )

CO + 2H₂ = CH₃OH

28g     4g          32g

59      8

For 8 kg hydrogen , CO required = 56 kg

CO is in excess .  hydrogen is the limiting reagent .

mass of product formed

= 32 x 8 / 4

= 64 kg

b )

percentage yield = product actually formed / product to be formed theoretically  x 100

= 59.6 x 100 / 64

= 93.12 %

c )

2CH₃OH + 3O₂ = 2CO₂ + 4H₂O .

64 g                     2 x 22.4 L

Gram of gas in 1 gallon of fuel

= .7914 x 3785

= 2995.5 g

CO₂ produced at NTP by 2995.5 g CH₃OH

= 2 x 22.4 x 2995.5 / 64 L

= 2096.85 L

At 27° C and 766 mm Hg , this volume is equal to

2096.85 x 300 x 760 / 273 x 766

= 2286.18  L .

d )

C₈H₁₈  =  8CO₂

114g           8 x 22.4 L

gram of fuel per unit gallon

= .6986 x 3785

= 2644.2g

gram of CO₂ produced by 1 gallon of fuel  at NTP

= 8 x 22.4 x 2644.2 / 114

= 4156.5 L

So it produces more CO₂ .

Answer:

ΔH°r = -1009.8 kJ

Explanation:

Let's consider the following balanced reaction.

2 NH₃(g) + 3 N₂O(g) ⇒ 4 N₂(g) + 3 H₂O(l)

We can calculate the standard enthalpy of the reaction (ΔH°r) using the following expression.

ΔH°r = [4 mol × ΔH°f(N₂(g)) + 3 mol × ΔH°f(H₂O(l))] - [2 mol × ΔH°f(NH₃(g)) + 3 mol × ΔH°f(N₂O(g))]

ΔH°r = [4 mol × 0 kJ/mol + 3 mol × (-285.8 kJ/mol)] - [2 mol × (-46.2 kJ/mol) + 3 mol × 81.6 kJ/mol]

ΔH°r = -1009.8 kJ

Answer

Naphthalene is a non electrolyte

If the unknown compound is an electrolyte it gives 2 or more ions in solution

( NaCl >> Na+ + Cl- => 2 ions

Ca(NO3)2 >> Ca2+ + 2 NO3- => 3 ions)

the f.p. lowering is directly proportional to the molal concentration of dissolved ions in the solution )

For naphthalene

delta T = 1.86 x m

for a salt that gives 2 ions

delta T = 1.86 x m x 2

hence the lowering in freezion point of unkown is greater then napthalene

Answer:

B. Reactant + Reactant -> Product + Product

Explanation:

Reactants are substances that- as the name suggests- reacts with other substances at the beginning of a reaction

Products are substances that are produced as a result of the reaction

Typically, when writing a chemical reaction, an arrow is used to show the direction the reaction is moving.  In this case, the arrows in options B and C suggest that the reaction only moves in one direction- forwards

And as mentioned above, reactants are the substances at the start of the reaction, they're what mixes together to form a new product.  

To keep things simple:

Products can't be at the beginning of a reaction since they weren't formed yet.

Similarly, reactants can't be part of the products since they already existed and didn't need to be made. In a lot cases, the reactants would be completely used up to make the products

As such, only one possible chemical reaction would follow that reasoning:

    Reactant + Reactant ->  Product + Product

Reactant + Reactant → Product + Product is the correctly written chemical reaction. Hence, option B is correct.

A chemical equation is a mathematical expression of the chemical reaction which represents the product formation from the reactants.

In an equation, the reactants are written on the left-hand side and the products are written on the right-hand side demonstrated by one-headed or two-headed arrows.

Hence, option B is correct.

Learn more about the chemical equation here:

https://brainly.com/question/12363199

#SPJ2

Answer:

a.

[tex]M_{Co^{2+}}=0.5M\\ \\M_{NO_3^{-}}=1.0M[/tex]

b.

[tex]M_{Fe^{3+}}=1.0M\\ \\M_{ClO_4^{-}}=3.0M[/tex]

Explanation:

Hello,

a. In this case, the ions are cobalt (II) and nitrate, for which, one mole of cobalt (II) nitrate contains one mole of cobalt (II) and two moles of nitrate (see subscripts), therefore, concentrations turn out:

[tex]M_{Co^{2+}}=0.5\frac{molCo(NO_3)_2}{L}* \frac{1molCo}{1molCo(NO_3)_2}=0.5M\\ \\M_{NO_3^{-}}=0.5\frac{molCo(NO_3)_2}{L}* \frac{2molNO_3^{-}}{1molCo(NO_3)_2}=1.0M[/tex]

b. In this case, the ions are iron (III) and chlorate, for which one mole of iron (III) is contained in one mole of iron (III) chlorate and three moles of chlorate are in one mole of iron (III) chlorate (see subscripts), therefore, the concentrations turn out:

[tex]M_{Fe^{3+}}=1.0\frac{molFe(ClO_4)_3}{L}* \frac{1molFe^{3+}}{1molFe(ClO_4)_3}=1.0M\\ \\M_{ClO_4^{-}}=0.5\frac{molFe(ClO_4)_3}{L}* \frac{3molClO_4^{-}}{1molFe(ClO_4)_3}=3.0M[/tex]

Regards.

The molecule shown below is a Saturated Alkane, because are hydrocarbons that have only single bonds and open chains.

Alkanes are acyclic and saturated hydrocarbons, that is, they are compounds formed only by carbon and hydrogen atoms, open chain and with only single bonds between their carbons.

In this case, Saturated alkanes are hydrocarbons whose carbon atoms are linked only with single bonds.

See more about Saturated alkanes at brainly.com/question/21881328

#SPJ1

The molecule shown below is a Saturated Alkane, because are hydrocarbons that have only single bonds and open chains.

Alkanes are saturated hydrocarbons. This means that their carbon atoms are joined to each other by single bonds.

Alkanes are saturated hydrocarbons. This means that contains only carbon and hydrogen atoms bonded by single bonds only. The general formula for an alkane is [tex]C_nH_{2n+2}[/tex].

In this case, Saturated alkanes are hydrocarbons whose carbon atoms are linked only with single bonds.

See more about Saturated alkanes at:

brainly.com/question/21881328

#SPJ1

Answer:

4.26 %

Explanation:

There is some info missing. I think this is the original question.

Calculate the percent ionization of nitrous acid in a solution that is 0.249 M in nitrous acid. The acid dissociation constant of nitrous acid is  4.50  ×  10 ⁻⁴.

Step 1: Given data

Initial concentration of the acid (Ca): 0.249 M

Acid dissociation constant (Ka): 4.50  ×  10 ⁻⁴

Step 2: Write the ionization reaction for nitrous acid

HNO₂(aq) ⇒ H⁺(aq) + NO₂⁻(aq)

Step 3: Calculate the concentration of nitrite in the equilibrium ([A⁻])

We will use the following expression.

[tex][A^{-} ] = \sqrt{Ca \times Ka } = \sqrt{0.249 \times 4.50 \times 10^{-4} } = 0.0106 M[/tex]

Step 4: Calculate the percent ionization of nitrous acid

We will use the following expression.

[tex]\alpha = \frac{[A^{-} ]}{[HA]} \times 100\% = \frac{0.0106M}{0.249} \times 100\% = 4.26\%[/tex]

Answer:

1: 2-bromo-3-chloropentane

Explanation:

find longest carbon chain =5

place the Br and Cl on the carbon chain

follow naming rules I guess

Answer:

the energy of the third excited rotational state [tex]\mathbf{E_3 = 16.041 \ meV}[/tex]

Explanation:

Given that :

hydrogen chloride (HCl) molecule has an intermolecular separation of 127 pm

Assume the atomic isotopes that make up the molecule are hydrogen-1 (protium) and chlorine-35.

Thus; the reduced mass μ = [tex]\dfrac{m_1 \times m_2}{m_1 + m_2}[/tex]

μ = [tex]\dfrac{1 \times 35}{1 + 35}[/tex]

μ = [tex]\dfrac{35}{36}[/tex]

∵ 1 μ = 1.66 × 10⁻²⁷ kg

μ  = [tex]\\ \\ \dfrac{35}{36} \times 1.66 \times 10^{-27} \ \ kg[/tex]

μ  = 1.6139 × 10⁻²⁷ kg

[tex]r_o = 127 \ pm = 127*10^{-12} \ m[/tex]

The rotational level Energy can be expressed by the equation:

[tex]E_J = \dfrac{h^2}{8 \pi^2 I } \times J ( J +1)[/tex]

where ;

J = 3 ( i.e third excited state)  &

[tex]I = \mu r^2_o[/tex]

[tex]E_J= \dfrac{h^2}{8 \pi \mu r^ 2 \mur_o } \times J ( J +1)[/tex]

[tex]E_3 = \dfrac{(6.63 \times 10^{-34})^2}{8 \times \pi ^2 \times 1.6139 \times 10^{-27} \times( 127 \times 10^{-12}) ^ 2 } \times 3 ( 3 +1)[/tex]

[tex]E_3= 2.5665 \times 10^{-21} \ J[/tex]

We know that :

1 J = [tex]\dfrac{1}{1.6 \times 10^{-19}}eV[/tex]

[tex]E_3= \dfrac{2.5665 \times 10^{-21} }{1.6 \times 10^{-19}}eV[/tex]

[tex]E_3 = 16.041 \times 10 ^{-3} \ eV[/tex]

[tex]\mathbf{E_3 = 16.041 \ meV}[/tex]

Answer:

D. Use x-ray radiation to see if there are any fractured bones.

Explanation:

The football player may have fractured a bone while he was practicing or playing, so it is best for the doctor to check if the player broke his bone or fractured it.

Answer:

10.328 m

Explanation:

normal atmospheric pressure = 101325 Pa

density of water at 25 °C = 1.0 g/cm^3 = 1000 kg/m^3

pressure = pgh

where p = density

g = acceleration due to gravity = 9.81 m/s^2

h = height of column

imputing values, we have

101325 = 1000 x 9.81 x h

height of column h = 101325/9810 = 10.328 m

Answer:

k= 1.5

[A] = 1 M

[B] = 3 M

m = 2

n = 1

Explanation:

rate = k[A]”[B]"

The rate of the reaction is 4.5 mol L⁻¹s⁻¹.

Rate of a reaction is defined as the change in concentration of any one of the reactants or products of the reaction, in unit time.

Here,

The concentration of A, [A] = 1 M

The concentration of B, [B] = 3 M

The partial order with respect to A, m = 2

The partial order with respect to B, n = 1

The rate constant of the reaction, k = 1.5

The rate of the reaction,

r = k[A]^m [B}^n

r = 1.5 x 1² x 3

r = 4.5 mol L⁻¹s⁻¹

Hence,

The rate of the reaction is 4.5 mol L⁻¹s⁻¹.

To learn more about rate of a reaction, click:

https://brainly.com/question/29049197

#SPJ2

Answer:

Molar mass = 52.96g/mol

density = 1.91g/L

Explanation:

using ideal gas equation

PV=nRT

Ideal gas law is valid only for ideal gas not for vanderwaal gas. Density and mass of unknown gas is 1.91g/L and 52.96g/mol respectively. The equation used to solve this is PM=dRT.

Ideal gas equation is the mathematical expression that relates pressure volume and temperature.

Mathematically the relation between Pressure, Molar mass and temperature can be given as

PV=nRT

This equation is arranged as

PM=dRT

Where,

P=pressure of gas = 1.05 atm

M= molar mass=?

d= density=?

R = Gas constant = 0.0821 L.atm/K.mol

T=temperature=354K

density=mass÷ volume

density=3.35 g÷1.75 L

density = 1.91g/L

PM=dRT

P×M=d×R×T

1.05 atm ×M= 1.91g/L× 0.0821 ×354K

M=52.96g/mol

Therefore, density and mass of unknown gas is 1.91g/L and 52.96g/mol respectively.

To learn more about ideal gas equation, here:

https://brainly.com/question/14826347

#SPJ5

Answer:

A. 70.7%

Explanation:

In the first step lets compute the molar mass of CH₃OH and CO

Molar Mass of CH₃OH =  1(12.01 g/mol) + 4(1.008 g/mol) +1(16.00 g/mol)

                                     = 32.042 g/mol

Molar Mass of CO₂      = 1(12.01 g/mol) + 2(16.00 g/mol)  

                                     = 44.01 g/mol

Mass of only one reactant i.e. CH₃OH is given so  it must be the limiting reactant. Next, the theoretical yield is calculated directly as follows:

Given mass of CH₃OH is 10.4 g. So we have:

                                     10.4g CH₃OH

Convert grams of CH₃OH to moles of CH₃OH utilizing molar mass of CH₃OH as:

                          1 mol CH₃OH / 32.042 g CH₃OH

Convert CH₃OH to moles of CO₂ using mole ratio as:

                             2 mol CO₂ / 2 mol CH₃OH

Convert moles of  CO₂ to grams of  CO₂ utilizing molar mass of  CO₂ as:

                           44.01 g/mol CO₂ / 1 mol CO₂

Now calculating theoretical yield using above steps:

[ 10.4 g CH₃OH ]  [1 mol CH₃OH / 32.042 g CH₃OH ]  [2 mol CO₂ / 2 mol CH₃OH]  [44.01 g/mol CO₂ / 1 mol CO₂]

Multiplication is performed here. We are left with 10.4 and 44.01 g CO₂ from numerator terms in the above equation and 32.042 from denominator terms after cancellation process of above terms. So this equation becomes:

= ( 10.4 ) ( 44.01 ) g CO₂ / 32.042

= 457.704/32/042

=  14.28 g CO₂

Theoretical yield =  14.28 g CO₂  

Finally compute the percent yield for a process in which 10.4g of CH₃OH reacts and 10.1 g of CO₂ is formed:

percent yield = (actual yield / theoretical yield) x 100

As we have calculated theoretical yield which is 14.28 g CO₂ and actual yield is 10.1 g CO₂ So,

percent yield = (10.1 g CO₂ / 14.28 g CO₂) x 100%

                       = 0.707 x 100%

                       = 70.7 %

Hence option A 70.7% yield is the correct answer.

The percent yield for a process is:

A. 70.7%

In the first step, lets compute the molar mass of CH₃OH and CO

Molar Mass of CH₃OH =  1(12.01 g/mol) + 4(1.008 g/mol) +1(16.00 g/mol)

= 32.042 g/mol

Molar Mass of CO₂ = 1(12.01 g/mol) + 2(16.00 g/mol)  

= 44.01 g/mol

Mass of only one reactant i.e. CH₃OH is given so it must be the limiting reactant.

Given mass of CH₃OH= 10.4 g.

Converting into number of moles:

1 mol CH₃OH / 32.042 g CH₃OH

Convert CH₃OH to moles of CO₂ using mole ratio as:

2 mol CO₂ / 2 mol CH₃OH

Convert moles of CO₂ to grams of  CO₂ utilizing molar mass of  CO₂ as:

44.01 g/mol CO₂ / 1 mol CO₂

Calculation for theoretical yield:

[ 10.4 g CH₃OH ]  [1 mol CH₃OH / 32.042 g CH₃OH ]  [2 mol CO₂ / 2 mol CH₃OH]  [44.01 g/mol CO₂ / 1 mol CO₂]

= ( 10.4 ) ( 44.01 ) g CO₂ / 32.042

= 457.704/32/042

=  14.28 g CO₂

Theoretical yield =  14.28 g CO₂  

Adding values in percent yield formula:

Percent yield = (actual yield / theoretical yield) / 100

Percent yield = (10.1 g CO₂ / 14.28 g CO₂) x 100%

= 0.707 x 100%

= 70.7 %

Hence, option A is the correct answer.

Find more information about Percent yield here:

brainly.com/question/25996347

Answer:

7p

Explanation:

principal quantum number is 7

n=7( principle shell)

angular momentum quantum number gives sub shell

l = 1 means it is p orbital

so answer is 7p orbital

Answer:

[tex]x_B=0.0769[/tex]

[tex]m=0.990m[/tex]

Explanation:

Hello,

In this case, we can compute the mole fraction of benzene by using the following formula:

[tex]x_B=\frac{n_B}{n_B+n_C}[/tex]

Whereas n accounts for the moles of each substance, thus, we compute them by using molar mass of benzene and cyclohexane:

[tex]n_B=6.24g*\frac{1mol}{78.11g}=0.0799mol\\ \\n_C=80.74g*\frac{1mol}{84.16g} =0.959mol[/tex]

Thus, we compute the mole fraction:

[tex]x_B=\frac{0.0799mol}{0.0799mol+0.959mol}\\ \\x_B=0.0769[/tex]

Next, for the molality, we define it as:

[tex]m=\frac{n_B}{m_C}[/tex]

Whereas we also use the moles of benzene but rather than the moles of cyclohexane, its mass in kilograms (0.08074 kg), thus, we obtain:

[tex]m=\frac{0.0799mol}{0.08074kg}=0.990mol/kg[/tex]

Or just 0.990 m in molal units (mol/kg).

Best regards.

Considering the definition of mole fraction and molality:

You know that:

The molar fraction is a way of measuring the concentration that expresses the proportion in which a substance is found with respect to the total moles of the solution.

Being the molar mass and the mass in the solution of each compound, the number of moles of each compound can be calculated as:

So, the total moles of the solution can be calculated as:

Total moles = 0.08 moles + 0.96 moles = 1.04 moles

Finally, the mole fraction of benzene can be calculated as follow:

[tex]\frac{number moles of benzene}{total moles} =\frac{0.08 moles}{1.04 moles} = 0.077[/tex]

Finally, the mole fraction of benzene is 0.077.

Molality is the ratio of the number of moles of any dissolved solute to kilograms of solvent.

The Molality of a solution is determined by the expression:

[tex]Molality=\frac{number of moles of solute}{kilograms of solvent}[/tex]

In this case, you know:

Replacing:

[tex]Molality benzene=\frac{0.08 moles}{0.08074 kg}[/tex]

Molality benzene= 0.9908 [tex]\frac{moles}{kg}[/tex]

Finally, the molality of benzene is 0.9908 [tex]\frac{moles}{kg}[/tex].

Learn more about:

Answer:

First the aqueous solution of iodine is heated mildly and then collection of the iodine crystals is done from its vapors.

Explanation:

Iodine is one of the elements that can get recovered easily from a given solution by going through the process of mild heating. For doing this, first, the aqueous solution is heated mildly over a low flame with a dish placed over the flame. As the process of mild heating continues, the fumes of the iodine start to originate that slowly get condense around the dish's cooler parts.  

With condensation, the formation of pure iodine crystals takes place. These iodine crystals can now be extracted easily by a physical method.  

The high concentration of salt forces water out of the cells lining your stomach and intestine.

Answer:

Vitamin K

Explanation:

this is the answer

Answer:

A. [OH⁻] = 2.188x10⁻³M

B. pKb = 6.02

Explanation:

When hydrazine is in equilbrium with water, its reaction is:

N₂H₄(aq) + H₂O(l) ⇄ HN₂H₄⁺(aq) + OH⁻(aq)

Where Kb, is defined as the ratio between concentrations in equilibrium of the species, thus:

Kb = [HN₂H₄⁺] [OH⁻] / [N₂H₄]

A. From pH, you can find [OH⁻], thus:

pH = -log [H⁺]

11.34 = -log [H⁺]

4.57x10⁻¹² = [H⁺]

As 1x10⁻¹⁴ = [OH⁻] [H⁺]

1x10⁻¹⁴ / 4.57x10⁻¹² = [OH⁻]

B. Concentrations in equilibrium of the species are:

[N₂H₄] = 5.0M - X

[HN₂H₄⁺] = X

[OH⁻] = X

Where X is reaction coordinate

As [OH⁻] = 2.188x10⁻³M

X = 2.188x10⁻³M

Replacing:

[N₂H₄] = 5.0M - 2.188x10⁻³M = 4.9978M

[HN₂H₄⁺] = 2.188x10⁻³M

[OH⁻] = 2.188x10⁻³M

Replacing in Kb expression:

Kb = [HN₂H₄⁺] [OH⁻] / [N₂H₄]

Kb = [2.188x10⁻³M] [2.188x10⁻³M] / [4.9978M]

Kb = 9.577x10⁻⁷

pKb is defined as -log Kb

pKb = -log 9.577x10⁻⁷