The maximum height of the rocket above the ground is 52.5 meters. The given function of the height of the rocket above the ground is: h(t)=-6t^(2)+30t+10, where t is the time (in seconds) since the launch. We have to find the maximum height of the rocket above the ground.
The given function is a quadratic equation in the standard form of the quadratic function ax^2 + bx + c = 0 where h(t) is the dependent variable of t,
a = -6,
b = 30,
and c = 10.
To find the maximum height of the rocket above the ground we have to convert the quadratic function in vertex form. The vertex form of the quadratic function is given by: h(t) = a(t - h)^2 + k Where the vertex of the quadratic function is (h, k).
Here is how to find the vertex form of the quadratic function:-
First, find the value of t by using the formula t = -b/2a.
Substitute the value of t into the quadratic function to find the maximum value of h(t) which is the maximum height of the rocket above the ground.
Finally, the maximum height of the rocket is k, and h is the time it takes to reach the maximum height.
Find the maximum height of the rocket above the ground, h(t) = -6t^2 + 30t + 10 a = -6,
b = 30,
and c = 10
t = -b/2a
= -30/-12.
t = 2.5 sec
The maximum height of the rocket above the ground is h(2.5)
= -6(2.5)^2 + 30(2.5) + 10
= 52.5 m
Therefore, the maximum height of the rocket above the ground is 52.5 meters.
The maximum height of the rocket above the ground occurs at t = -b/2a. If the value of a is negative, then the maximum height of the rocket occurs at the vertex of the quadratic function, which is the highest point of the parabola.
To know more about height visit :
https://brainly.com/question/29131380
#SPJ11
if we are teasting for the diffrence between the nmeans of 2 related populations with samples of n^1-20 and n^2-20 the number of degrees of freedom is equal to
In this case, the number of degrees of freedom would be 13.
When testing for the difference between the means of two related populations using samples of size n1-20 and n2-20, the number of degrees of freedom can be calculated using the formula:
df = (n1-1) + (n2-1)
Let's break down the formula and understand its components:
1. n1: This represents the sample size of the first population. In this case, it is given as n1-20, which means the sample size is 20 less than n1.
2. n2: This represents the sample size of the second population. Similarly, it is given as n2-20, meaning the sample size is 20 less than n2.
To calculate the degrees of freedom (df), we need to subtract 1 from each sample size and then add them together. The formula simplifies to:
df = n1 - 1 + n2 - 1
Substituting the given values:
df = (n1-20) - 1 + (n2-20) - 1
Simplifying further:
df = n1 + n2 - 40 - 2
df = n1 + n2 - 42
Therefore, the number of degrees of freedom is equal to the sum of the sample sizes (n1 and n2) minus 42.
For example, if n1 is 25 and n2 is 30, the degrees of freedom would be:
df = 25 + 30 - 42
= 13
Learn more about degrees of freedom from the link:
https://brainly.com/question/28527491
#SPJ11
Suppose A = B_1 B_2... B_k and B is a square matrix for all 1 ≤ i ≤ k. Prove that A is invertible if and only if B_i is invertible for all 1 ≤ i ≤ k.
We have shown that A is invertible if and only if B_i is invertible for all 1 ≤ i ≤ k
To prove the statement, we will prove both directions separately:
Direction 1: If A is invertible, then B_i is invertible for all 1 ≤ i ≤ k.
Assume A is invertible. This means there exists a matrix C such that AC = CA = I, where I is the identity matrix.
Now, let's consider B_i for some arbitrary i between 1 and k. We want to show that B_i is invertible.
We can rewrite A as A = (B_1 B_2 ... B_i-1)B_i(B_i+1 ... B_k).
Multiply both sides of the equation by C on the right:
A*C = (B_1 B_2 ... B_i-1)B_i(B_i+1 ... B_k)*C.
Now, consider the subexpression (B_1 B_2 ... B_i-1)B_i(B_i+1 ... B_k)*C. This is equal to the product of invertible matrices since A is invertible and C is invertible (as it is the inverse of A). Therefore, this subexpression is also invertible.
Since a product of invertible matrices is invertible, we conclude that B_i is invertible for all 1 ≤ i ≤ k.
Direction 2: If B_i is invertible for all 1 ≤ i ≤ k, then A is invertible.
Assume B_i is invertible for all i between 1 and k. We want to show that A is invertible.
Let's consider the product A = B_1 B_2 ... B_k. Since each B_i is invertible, we can denote their inverses as B_i^(-1).
We can rewrite A as A = B_1 (B_2 ... B_k). Now, let's multiply A by the product (B_2 ... B_k)^(-1) on the right:
A*(B_2 ... B_k)^(-1) = B_1 (B_2 ... B_k)(B_2 ... B_k)^(-1).
The subexpression (B_2 ... B_k)(B_2 ... B_k)^(-1) is equal to the identity matrix I, as the inverse of a matrix multiplied by the matrix itself gives the identity matrix.
Therefore, we have A*(B_2 ... B_k)^(-1) = B_1 I = B_1.
Now, let's multiply both sides by B_1^(-1) on the right:
A*(B_2 ... B_k)^(-1)*B_1^(-1) = B_1*B_1^(-1).
The left side simplifies to A*(B_2 ... B_k)^(-1)*B_1^(-1) = A*(B_2 ... B_k)^(-1)*B_1^(-1) = I, as we have the product of inverses.
Therefore, we have A = B_1*B_1^(-1) = I.
This shows that A is invertible, as it has an inverse equal to (B_2 ... B_k)^(-1)*B_1^(-1).
.
Learn more about invertible here :-
https://brainly.com/question/31479702
#SPJ11
Suppose we have a discrete time dynamical system given by: x(k+1)=Ax(k) where A=[−1−31.53.5] (a) Is the system asymptotically stable, stable or unstable? (b) If possible find a nonzero initial condition x0 such that if x(0)=x0, then x(k) grows unboundedly as k→[infinity]. If not, explain why it is not possible. (c) If possible find a nonzero initial condition x0 such that if x(0)=x0, then x(k) approaches 0 as k→[infinity]. If not, explain why it is not possible.
(a) The system is asymptotically stable because the absolute values of both eigenvalues are less than 1.
(b) The system is asymptotically stable, so x(k) will not grow unboundedly for any nonzero initial condition.
(c) Choosing the initial condition x₀ = [-1, 0.3333] ensures that x(k) approaches 0 as k approaches infinity.
(a) To determine the stability of the system, we need to analyze the eigenvalues of matrix A. The eigenvalues λ satisfy the equation det(A - λI) = 0, where I is the identity matrix.
Solving the equation det(A - λI) = 0 for λ, we find that the eigenvalues are λ₁ = -1 and λ₂ = -0.5.
Since the absolute values of both eigenvalues are less than 1, i.e., |λ₁| < 1 and |λ₂| < 1, the system is asymptotically stable.
(b) It is not possible to find a nonzero initial condition x₀ such that x(k) grows unboundedly as k approaches infinity. This is because the system is asymptotically stable, meaning that for any initial condition, the state variable x(k) will converge to a bounded value as k increases.
(c) To find a nonzero initial condition x₀ such that x(k) approaches 0 as k approaches infinity, we need to find the eigenvector associated with the eigenvalue λ = -1 (the eigenvalue closest to 0).
Solving the equation (A - λI)v = 0, where v is the eigenvector, we have:
⎡−1−31.53.5⎤v = 0
Simplifying, we obtain the following system of equations:
-1v₁ - 3v₂ = 0
1.5v₁ + 3.5v₂ = 0
Solving this system of equations, we find that v₁ = -1 and v₂ = 0.3333 (approximately).
Therefore, a nonzero initial condition x₀ = [-1, 0.3333] can be chosen such that x(k) approaches 0 as k approaches infinity.
Learn more about eigenvalues here:
https://brainly.com/question/29861415
#SPJ11
A ball is thrown into the air by a baby allen on a planet in the system of Apha Centaur with a velocity of 36 ft/s. Its height in feet after f seconds is given by y=36t−16t^2
a) Find the tvenge velocity for the time period beginning when f_0=3 second and lasting for the given time. t=01sec
t=.005sec
t=.002sec
t=.001sec
The tvenge velocity for the time period beginning when f_0=3 second and lasting for t=0.1 sec is - 28.2 ft/s. Answer: - 28.2 ft/s.
The height of a ball thrown into the air by a baby allen on a planet in the system of Alpha Centaur with a velocity of 36 ft/s is given by the function y
=36t−16t^2 where f is measured in seconds. To find the tvenge velocity for the time period beginning when f_0
=3 second and lasting for the given time. t
=0.1 sec, t
=0.005 sec, t
=0.002 sec, t
=0.001 sec. We can differentiate the given function with respect to time (t) to find the tvenge velocity, `v` which is the rate of change of height with respect to time. Then, we can substitute the values of `t` in the expression for `v` to find the tvenge velocity for different time periods.t given;
= 0.1 sec The tvenge velocity for t
=0.1 sec can be found by differentiating y
=36t−16t^2 with respect to t. `v
=d/dt(y)`
= 36 - 32 t Given, f_0
=3 sec, t
=0.1 secFor time period t
=0.1 sec, we need to find the average velocity of the ball between 3 sec and 3.1 sec. This is given by,`v_avg
= (y(3.1)-y(3))/ (3.1 - 3)`Substituting the values of t in the expression for y,`v_avg
= [(36(3.1)-16(3.1)^2) - (36(3)-16(3)^2)] / (3.1 - 3)`v_avg
= - 28.2 ft/s.The tvenge velocity for the time period beginning when f_0
=3 second and lasting for t
=0.1 sec is - 28.2 ft/s. Answer: - 28.2 ft/s.
To know more about velocity visit:
https://brainly.com/question/30559316
#SPJ11
Heavy Numbers 4.1 Background on heavy numbers 4.1.1 The heavy sequence A sequence of numbers (the heavy sequence) y 0
y 1
y 2
y 3
…y n
… is defined such that each number is the sum of digits squared of the previous number, in a particular base. Consider numbers in base 10 , with y 0
=12 The next number in the sequence is y 1
=1 2
+2 2
=5 The next number in the sequence is y 2
=5 2
=25 The next number in the sequence is y 3
=2 2
+5 2
=29 4.1.2 Heaviness It turns out that for each number y 0
and base N, the heavy sequence either converges to 1 , or it does not. A number whose sequence converges to 1 in base N is said to be "heavy in base N" 4.2 Program requirements Write a function heavy that takes as arguments a number y and a base N and returns whether that number y is heavy in the base N provided. Here are examples: ≫ heavy (4,10) False > heavy (2211,10) True ≫ heavy (23,2) True ≫ heavy (10111,2) True ≫ heavy (12312,4000) False 4.2.1 Value Ranges The number y will always be non-negative, and the base N will always satisfy 2≤N≤4000
The function iteratively calculates the next number in the heavy sequence until it reaches 1 or detects a repeating pattern. If the next number becomes equal to the current number, it means the sequence does not converge to 1 and the number is not heavy in the given base. Otherwise, if the sequence reaches 1, the number is heavy.
Here's a Python implementation of the heavy function that checks if a number y is heavy in base N:
python
Copy code
def heavy(y, N):
while y != 1:
next_num = sum(int(digit)**2 for digit in str(y))
if next_num == y:
return False
y = next_num
return True
You can use this function to check if a number is heavy in a specific base. For example:
python
Copy code
print(heavy(4, 10)) # False
print(heavy(2211, 10)) # True
print(heavy(23, 2)) # True
print(heavy(10111, 2)) # True
print(heavy(12312, 4000)) # False
The function iteratively calculates the next number in the heavy sequence until it reaches 1 or detects a repeating pattern. If the next number becomes equal to the current number, it means the sequence does not converge to 1 and the number is not heavy in the given base. Otherwise, if the sequence reaches 1, the number is heavy.
Note: This implementation assumes that the input number y and base N are within the specified value ranges of non-negative y and 2 <= N <= 4000.
Learn more about function from
https://brainly.com/question/11624077
#SPJ11
Evaluate the following limit. limx→[infinity] inx/√x
The limit of (inx)/√x as x approaches infinity is infinity.
The limit of (inx)/√x as x approaches infinity can be evaluated using L'Hôpital's rule:
limx→∞ (inx)/√x = limx→∞ (n/√x)/(-1/2√x^3)
Applying L'Hôpital's rule, we take the derivative of the numerator and the denominator:
limx→∞ (inx)/√x = limx→∞ (d/dx (n/√x))/(d/dx (-1/2√x^3))
= limx→∞ (-n/2x^2)/(-3/2√x^5)
= limx→∞ (n/3) * (x^(5/2)/x^2)
= limx→∞ (n/3) * (x^(5/2-2))
= limx→∞ (n/3) * (x^(1/2))
= ∞
Therefore, the limit of (inx)/√x as x approaches infinity is infinity.
To evaluate the limit of (inx)/√x as x approaches infinity, we can apply L'Hôpital's rule. The expression can be rewritten as (n/√x)/(-1/2√x^3).
Using L'Hôpital's rule, we differentiate the numerator and denominator with respect to x. The derivative of n/√x is -n/2x^2, and the derivative of -1/2√x^3 is -3/2√x^5.
Substituting these derivatives back into the expression, we have:
limx→∞ (inx)/√x = limx→∞ (d/dx (n/√x))/(d/dx (-1/2√x^3))
= limx→∞ (-n/2x^2)/(-3/2√x^5)
Simplifying the expression further, we get:
limx→∞ (inx)/√x = limx→∞ (n/3) * (x^(5/2)/x^2)
= limx→∞ (n/3) * (x^(5/2-2))
= limx→∞ (n/3) * (x^(1/2))
= ∞
Hence, the limit of (inx)/√x as x approaches infinity is infinity. This means that as x becomes infinitely large, the value of the expression also becomes infinitely large. This can be understood by considering the behavior of the terms involved: as x grows larger and larger, the numerator increases linearly with x, while the denominator increases at a slower rate due to the square root. Consequently, the overall value of the expression approaches infinity.
Learn more about infinity here:
brainly.com/question/22443880
#SPJ11
A line passes through the points P(−4,7,−7) and Q(−1,−1,−1). Find the standard parametric equations for the line, written using the base point P(−4,7,−7) and the components of the vector PQ.
The standard parametric equations are r_x = -4 + 3t, r_y = 7 - 8t, r_z = -7 + 6t
The given line passes through the points P(−4,7,−7) and Q(−1,−1,−1).
The standard parametric equation for the line that is written using the base point P(−4,7,−7) and the components of the vector PQ is given by;
r= a + t (b-a)
Where the vector of the given line is represented by the components of vector PQ = Q-P
= (Qx-Px)i + (Qy-Py)j + (Qz-Pz)k
Therefore;
vector PQ = [(−1−(−4))i+ (−1−7)j+(−1−(−7))k]
PQ = [3i - 8j + 6k]
Now that we have PQ, we can find the parametric equation of the line.
Using the equation; r= a + t (b-a)
The line passing through points P(-4, 7, -7) and Q(-1, -1, -1) can be represented parametrically as follows:
r = P + t(PQ)
Therefore,
r = (-4,7,-7) + t(3,-8,6)
Standard parametric equations are:
r_x = -4 + 3t
r_y = 7 - 8t
r_z = -7 + 6t
Therefore, the standard parametric equations for the given line, written using the base point P(−4,7,−7) and the components of the vector PQ, are given as; r = (-4,7,-7) + t(3,-8,6)
The standard parametric equations are r_x = -4 + 3t
r_y = 7 - 8t
r_z = -7 + 6t
To know more about equations visit:
https://brainly.com/question/29538993
#SPJ11
Create an .R script that when run performs the following tasks
(a) Assign x = 3 and y = 4
(b) Calculates ln(x + y)
(c) Calculates log10( xy
2 )
(d) Calculates the 2√3 x + √4 y
(e) Calculates 10x−y + exp{xy}
R script that performs the tasks you mentioned:
```R
# Task (a)
x <- 3
y <- 4
# Task (b)
ln_result <- log(x + y)
# Task (c)
log_result <- log10(x * y²)
# Task (d)
sqrt_result <- 2 * sqrt(3) * x + sqrt(4) * y
# Task (e)
exp_result <-[tex]10^{x - y[/tex] + exp(x * y)
# Printing the results
cat("ln(x + y) =", ln_result, "\n")
cat("log10([tex]xy^2[/tex]) =", log_result, "\n")
cat("2√3x + √4y =", sqrt_result, "\n")
cat("[tex]10^{x - y[/tex] + exp(xy) =", exp_result, "\n")
```
When you run this script, it will assign the values 3 to `x` and 4 to `y`. Then it will calculate the results for each task and print them to the console.
Note that I've used the `log()` function for natural logarithm, `log10()` for base 10 logarithm, and `sqrt()` for square root. The caret `^` operator is used for exponentiation.
To know more about R script visit:
https://brainly.com/question/32063642
#SPJ11
can
someone help me to solve this equation for my nutrition class?
22. 40 yo F Ht:5'3" Wt: 194# MAC: 27.3{~cm} TSF: 1.25 {cm} . Arm muste ara funakes: \frac{\left[27.3-(3.14 \times 1.25]^{2}\right)}{4 \times 3.14}-10 Calculate
For a 40-year-old female with a height of 5'3" and weight of 194 pounds, the calculated arm muscle area is approximately 33.2899 square centimeters.
From the given information:
Age: 40 years old
Height: 5 feet 3 inches (which can be converted to centimeters)
Weight: 194 pounds
MAC (Mid-Arm Circumference): 27.3 cm
TSF (Triceps Skinfold Thickness): 1.25 cm
First, let's convert the height from feet and inches to centimeters. We know that 1 foot is approximately equal to 30.48 cm and 1 inch is approximately equal to 2.54 cm.
Height in cm = (5 feet * 30.48 cm/foot) + (3 inches * 2.54 cm/inch)
Height in cm = 152.4 cm + 7.62 cm
Height in cm = 160.02 cm
Now, we can calculate the arm muscle area using the given formula:
Arm muscle area = [(MAC - (3.14 * TSF))^2 / (4 * 3.14)] - 10
Arm muscle area = [(27.3 - (3.14 * 1.25))^2 / (4 * 3.14)] - 10
Arm muscle area = [(27.3 - 3.925)^2 / 12.56] - 10
Arm muscle area = (23.375^2 / 12.56) - 10
Arm muscle area = 543.765625 / 12.56 - 10
Arm muscle area = 43.2899 - 10
Arm muscle area = 33.2899
Therefore, the calculated arm muscle area for the given parameters is approximately 33.2899 square centimeters.
To learn more about area visit:
https://brainly.com/question/22972014
#SPJ11
The complete question is,
For a 40-year-old female with a height of 5'3" and weight of 194 pounds, where MAC = 27.3 cm and TSF = 1.25 cm, calculate the arm muscle area
1.2.22 In this exercise, we tweak the proof of Thea. rem 1.2.3 slightly to get another proof of the CauchySchwarz inequality. (a) What inequality results from choosing c=∥w∥ and d=∥v∥ in the proof? (b) What inequality results from choosing c=∥w∥ and d=−∥v∥ in the proof? (c) Combine the inequalities from parts (a) and (b) to prove the Cauchy-Schwarz inequality.
This inequality is an important tool in many branches of mathematics.
(a) Choosing c=∥w∥ and d=∥v∥ in the proof, we get,|⟨v,w⟩| ≤ ∥v∥ ∥w∥. This is another version of the Cauchy-Schwarz inequality.
(b) Choosing c=∥w∥ and d=−∥v∥ in the proof, we get,|⟨v,w⟩| ≤ ∥v∥ ∥w∥. This is the same inequality as in part (a).
(c) Combining the inequalities from parts (a) and (b), we get,|⟨v,w⟩| ≤ ∥v∥ ∥w∥ and |⟨v,w⟩| ≤ −∥v∥ ∥w∥
Multiplying these two inequalities, we get(⟨v,w⟩)² ≤ (∥v∥ ∥w∥)²,which is the Cauchy-Schwarz inequality. The inequality says that for any two vectors v and w in an inner product space, the absolute value of the inner product of v and w is less than or equal to the product of the lengths of the vectors.
Learn more about Cauchy-Schwarz inequality
https://brainly.com/question/30402486
#SPJ11
Find the general solution of the given differential equation, and use it to determine how solutions behave as t \rightarrow [infinity] . y^{\prime}+\frac{y}{t}=7 cos (2 t), t>0 NOTE: Use c for
The general solution is y(t) = c*t - (7/3)*sin(2t) + (7/6)*cos(2t), and as t approaches infinity, the solution oscillates.
To find the general solution of the given differential equation y' + y/t = 7*cos(2t), t > 0, we can use an integrating factor. Rearranging the equation, we have:
y' + (1/t)y = 7cos(2t)
The integrating factor is e^(∫(1/t)dt) = e^(ln|t|) = |t|. Multiplying both sides by the integrating factor, we get:
|t|y' + y = 7t*cos(2t)
Integrating, we have:
∫(|t|y' + y) dt = ∫(7t*cos(2t)) dt
This yields the solution:
|t|*y = -(7/3)tsin(2t) + (7/6)*cos(2t) + c
Dividing both sides by |t|, we obtain:
y(t) = c*t - (7/3)*sin(2t) + (7/6)*cos(2t)
As t approaches infinity, the sin(2t) and cos(2t) terms oscillate, while the c*t term continues to increase linearly. Therefore, the solutions behave in an oscillatory manner as t approaches infinity.
To learn more about “integrating factor” refer to the https://brainly.com/question/32805938
#SPJ11
Find the limit L. Then use the ε−δ definition to prove that the limit is L. limx→−4( 1/2x−8) L=
The limit of the function f(x) = 1/(2x - 8) as x approaches -4 is -1/16. Using the ε-δ definition, we have proven that for any ε > 0, there exists a δ > 0 such that whenever 0 < |x - (-4)| < δ, then |f(x) - L| < ε. Therefore, the limit is indeed -1/16.
To find the limit of the function f(x) = 1/(2x - 8) as x approaches -4, we can directly substitute -4 into the function and evaluate:
lim(x→-4) (1/(2x - 8)) = 1/(2(-4) - 8)
= 1/(-8 - 8)
= 1/(-16)
= -1/16
Therefore, the limit L is -1/16.
To prove this limit using the ε-δ definition, we need to show that for any ε > 0, there exists a δ > 0 such that whenever 0 < |x - (-4)| < δ, then |f(x) - L| < ε.
Let's proceed with the proof:
Given ε > 0, we want to find a δ > 0 such that |f(x) - L| < ε whenever 0 < |x - (-4)| < δ.
Let's consider |f(x) - L|:
|f(x) - L| = |(1/(2x - 8)) - (-1/16)| = |(1/(2x - 8)) + (1/16)|
To simplify the expression, we can use a common denominator:
|f(x) - L| = |(16 + 2x - 8)/(16(2x - 8))|
Since we want to find a δ such that |f(x) - L| < ε, we can set a condition on the denominator to avoid division by zero:
16(2x - 8) ≠ 0
Solving the inequality:
32x - 128 ≠ 0
32x ≠ 128
x ≠ 4
So we can choose δ such that δ < 4 to avoid division by zero.
Now, let's choose δ = min{1, 4 - |x - (-4)|}.
For this choice of δ, whenever 0 < |x - (-4)| < δ, we have:
|x - (-4)| < δ
|x + 4| < δ
|x + 4| < 4 - |x + 4|
2|x + 4| < 4
|x + 4|/2 < 2
|x - (-4)|/2 < 2
|x - (-4)| < 4
To know more about function,
https://brainly.com/question/17604116
#SPJ11
How do you solve for mean deviation?
To solve for mean deviation, find the mean of the data set and then calculate the absolute deviation of each data point from the mean.
Once you have the mean, you can calculate the deviation of each data point from the mean. The deviation (often denoted as d) of a particular data point (let's say xi) is found by subtracting the mean from that data point:
d = xi - μ
Next, you need to find the absolute value of each deviation. Absolute value disregards the negative sign, so you don't end up with negative deviations. For example, if a data point is below the mean, taking the absolute value ensures that the deviation is positive. The absolute value of a number is denoted by two vertical bars on either side of the number.
Now, calculate the absolute deviation (often denoted as |d|) for each data point by taking the absolute value of each deviation:
|d| = |xi - μ|
After finding the absolute deviations, you'll compute the mean of these absolute deviations. Sum up all the absolute deviations and divide by the total number of data points:
Mean Deviation = (|d₁| + |d₂| + |d₃| + ... + |dn|) / n
This value represents the mean deviation of the data set. It tells you, on average, how far each data point deviates from the mean.
To know more about deviation here
https://brainly.com/question/16555520
#SPJ4
Solve using power series
(2+x)y' = y
xy" + y + xy = 0
(2+x)y' = y
solve the ODE using power series
Using power series (2+x)y' = y, xy" + y + xy = 0, (2+x)y' = y the solution to the given ODE is y = a_0, where a_0 is a constant.
To find the solution of the ordinary differential equation (ODE) (2+x)y' = yxy" + y + xy = 0, we can solve it using the power series method.
Let's assume a power series solution of the form y = ∑(n=0 to ∞) a_nx^n, where a_n represents the coefficients of the power series.
First, we differentiate y with respect to x to find y':
y' = ∑(n=0 to ∞) na_nx^(n-1) = ∑(n=1 to ∞) na_nx^(n-1).
Next, we differentiate y' with respect to x to find y'':
y" = ∑(n=1 to ∞) n(n-1)a_nx^(n-2).
Now, let's substitute y, y', and y" into the ODE:
(2+x)∑(n=1 to ∞) na_nx^(n-1) = ∑(n=0 to ∞) a_nx^(n+1)∑(n=1 to ∞) n(n-1)a_nx^(n-2) + ∑(n=0 to ∞) a_nx^n + x∑(n=0 to ∞) a_nx^(n+1).
Expanding the series and rearranging terms, we have:
2∑(n=1 to ∞) na_nx^(n-1) + x∑(n=1 to ∞) na_nx^(n-1) = ∑(n=0 to ∞) a_nx^(n+1)∑(n=1 to ∞) n(n-1)a_nx^(n-2) + ∑(n=0 to ∞) a_nx^n + x∑(n=0 to ∞) a_nx^(n+1).
Now, equating the coefficients of each power of x to zero, we can solve for the coefficients a_n recursively.
For example, equating the coefficient of x^0 to zero, we have:
2a_1 + 0 = 0,
a_1 = 0.
Similarly, equating the coefficient of x^1 to zero, we have:
2a_2 + a_1 = 0,
a_2 = -a_1/2 = 0.
Continuing this process, we can solve for the coefficients a_n for each n.
Since all the coefficients a_n for n ≥ 1 are zero, the power series solution becomes y = a_0, where a_0 is the coefficient of x^0.
Therefore, the solution to the ODE is y = a_0, where a_0 is an arbitrary constant.
In summary, the solution to the given ODE is y = a_0, where a_0 is a constant.
Learn more about power series here:
brainly.com/question/29896893
#SPJ11
For the given function, find (a) the equation of the secant line through the points where x has the given values and (b) the equation of the tangent line when x has the first value. y=f(x)=x^2+x;x=−4,x=−1
The equation of the tangent line passing through the point (-4, 12) with slope -7: y = -7x - 16.
We are given the function: y = f(x) = x² + x and two values of x:
x₁ = -4 and x₂ = -1.
We are required to find:(a) the equation of the secant line through the points where x has the given values (b) the equation of the tangent line when x has the first value (i.e., x = -4).
a) Equation of secant line passing through points (-4, f(-4)) and (-1, f(-1))
Let's first find the values of y at these two points:
When x = -4,
y = f(-4) = (-4)² + (-4)
= 16 - 4
= 12
When x = -1,
y = f(-1) = (-1)² + (-1)
= 1 - 1
= 0
Therefore, the two points are (-4, 12) and (-1, 0).
Now, we can use the slope formula to find the slope of the secant line through these points:
m = (y₂ - y₁) / (x₂ - x₁)
= (0 - 12) / (-1 - (-4))
= -4
The slope of the secant line is -4.
Let's use the point-slope form of the line to write the equation of the secant line passing through these two points:
y - y₁ = m(x - x₁)
y - 12 = -4(x + 4)
y - 12 = -4x - 16
y = -4x - 4
b) Equation of the tangent line when x = -4
To find the equation of the tangent line when x = -4, we need to find the slope of the tangent line at x = -4 and a point on the tangent line.
Let's first find the slope of the tangent line at x = -4.
To do that, we need to find the derivative of the function:
y = f(x) = x² + x
(dy/dx) = 2x + 1
At x = -4, the slope of the tangent line is:
dy/dx|_(x=-4)
= 2(-4) + 1
= -7
The slope of the tangent line is -7.
To find a point on the tangent line, we need to use the point (-4, f(-4)) = (-4, 12) that we found earlier.
Let's use the point-slope form of the line to find the equation of the tangent line passing through the point (-4, 12) with slope -7:
y - y₁ = m(x - x₁)
y - 12 = -7(x + 4)
y - 12 = -7x - 28
y = -7x - 16
Know more about the tangent line
https://brainly.com/question/30162650
#SPJ11
∫2+3xdx (Hint: Let U=2+3x And Carefully Handle Absolute Value)
To evaluate the integral ∫(2+3x)dx, we can use the power rule of integration. However, we need to be careful when handling the absolute value of the expression 2+3x.
Let's first rewrite the expression as U = 2+3x. Now, differentiating both sides with respect to x gives dU = 3dx. Rearranging, we have dx = (1/3)dU.
Substituting these expressions into the original integral, we get ∫(2+3x)dx = ∫U(1/3)dU = (1/3)∫UdU.
Using the power rule of integration, we can integrate U as U^2/2. Thus, the integral becomes (1/3)(U^2/2) + C, where C is the constant of integration.
Finally, substituting back U = 2+3x, we have (1/3)((2+3x)^2/2) + C as the result of the integral.
Learn more about constant of integration here: brainly.com/question/31405248
#SPJ11
If two indifference curves were to intersect at a point, this would violate the assumption of A. transitivity B. completeness C. Both A and B above. D. None of the above. 23. If the utility function (U) between food (F) and clothing (C) can be represented as U(F,C)- Facos holding the consumption of clothing fixed, the utility will A. increase at an increasing speed when more food is consumed B. increase at an decreasing speed when more food is consumed C. increase at an constant speed when more food is consumed. D. remain the same. 24. If Fred's marginal utility of pizza equals 10 and his marginal utility of salad equals 2, then A. he would give up five pizzas to get the next salad B. he would give up five salads to get the next pizza C. he will eat five times as much pizza as salad. D. he will eat five times as much salad as pizza 25. Sarah has the utility function U(X, Y) = X05yas When Sarah consumes X=2 and Y-6 she has a marginal rate of substitution of A. -12 B. -1/6 C. -6 D. -1/12 26. Sue views hot dogs and hot dog buns as perfect complements in her consumption, and the corners of her indifference curves follow the 45-degree line. Suppose the price of hot dogs is $5 per package (8 hot dogs), the price of buns is $3 per package (8 hot dog buns), and Sue's budget is $48 per month. What is her optimal choice under this scenario? A. 8 packages of hot dogs and 6 packages of buns B. 8 packages of hot dogs and 8 packages of buns C. 6 packages of hot dogs and 6 packages of buns D. 6 packages of hot dogs and 8 packages of buns 27. If two g0ods are perfect complements, A. there is a bliss point and the indifference curves surround this point. B. straight indifference curves have a negative slope. C. convex indifference curves have a negative slope. D. indifference curves have a L-shape. 28. Max has allocated $100 toward meats for his barbecue. His budget line and indifference map are shown in the below figure. If Max is currently at point e, A. his MRSurorrchicken is less than the trade-off offered by the market. B. he is willing to give up less burger than he has to, given market prices C. he is maximizing his utility. D. he is indifference between point b and point e because both on the budget line.
23) D. None of the above. 24) A. He would give up five pizzas to get the next salad 25) C. -6. The marginal rate of substitution (MRS) is the ratio of the marginal utilities of two goods 26) C. 6 packages of hot dogs and 6 packages of buns. 27) D. Indifference curves have an L-shape when two goods are perfect complements. 28) C. He is maximizing his utility
How to determine the what would violate the assumption of transitivity23. D. None of the above. The assumption that would be violated if two indifference curves intersect at a point is the assumption of continuity, not transitivity or completeness.
24. A. He would give up five pizzas to get the next salad. This is based on the principle of diminishing marginal utility, where the marginal utility of a good decreases as more of it is consumed.
25. C. -6. The marginal rate of substitution (MRS) is the ratio of the marginal utilities of two goods. In this case, the MRS is given by the derivative of U(X, Y) with respect to X divided by the derivative of U(X, Y) with respect to Y. Taking the derivatives of the utility function U(X, Y) = X^0.5 * Y^0.5 and substituting X = 2 and Y = 6, we get MRS = -6.
26. C. 6 packages of hot dogs and 6 packages of buns. Since hot dogs and hot dog buns are perfect complements, Sue's optimal choice will be to consume them in fixed proportions. In this case, she would consume an equal number of packages of hot dogs and hot dog buns, which is 6 packages each.
27. D. Indifference curves have an L-shape when two goods are perfect complements. This means that the consumer always requires a fixed ratio of the two goods, and the shape of the indifference curves reflects this complementary relationship.
28. C. He is maximizing his utility. Point e represents the optimal choice for Max given his budget constraint and indifference map. It is the point where the budget line is tangent to an indifference curve, indicating that he is maximizing his utility for the given budget.
Learn more about marginal utilities at https://brainly.com/question/14797444
#SPJ1
The annual per capita consumption of bottled water was 30.3 gallons. Assume that the per capita consumption of bottled water is approximately normally distributed with a mean of 30.3 and a standard deviation of 10 gallons. a. What is the probability that someone consumed more than 30 gallons of bottled water? b. What is the probability that someone consumed between 30 and 40 gallons of bottled water? c. What is the probability that someone consumed less than 30 gallons of bottled water? d. 99% of people consumed less than how many gallons of bottled water? One year consumers spent an average of $24 on a meal at a resturant. Assume that the amount spent on a resturant meal is normally distributed and that the standard deviation is 56 Complete parts (a) through (c) below a. What is the probability that a randomly selected person spent more than $29? P(x>$29)= (Round to four decimal places as needed.) In 2008, the per capita consumption of soft drinks in Country A was reported to be 17.97 gallons. Assume that the per capita consumption of soft drinks in Country A is approximately normally distributed, with a mean of 17.97gallons and a standard deviation of 4 gallons. Complete parts (a) through (d) below. a. What is the probability that someone in Country A consumed more than 11 gallons of soft drinks in 2008? The probability is (Round to four decimal places as needed.) An Industrial sewing machine uses ball bearings that are targeted to have a diameter of 0.73 inch. The lower and upper specification limits under which the ball bearings can operate are 0.72 inch and 0.74 inch, respectively. Past experience has indicated that the actual diameter of the ball bearings is approximately normally distributed, with a mean of 0.733 inch and a standard deviation of 0.005 inch. Complete parts (a) through (θ) below. a. What is the probability that a ball bearing is between the target and the actual mean? (Round to four decimal places as needed.)
99% of people consumed less than 54.3 gallons of bottled water. The probability that someone consumed more than 30 gallons of bottled water is 0.512. The probability that someone consumed less than 30 gallons of bottled water is 0.488.
a. Probability that someone consumed more than 30 gallons of bottled water = P(X > 30)
Using the given mean and standard deviation, we can convert the given value into z-score and find the corresponding probability.
P(X > 30) = P(Z > (30 - 30.3) / 10) = P(Z > -0.03)
Using a standard normal table or calculator, we can find the probability as:
P(Z > -0.03) = 0.512
Therefore, the probability that someone consumed more than 30 gallons of bottled water is 0.512.
b. Probability that someone consumed between 30 and 40 gallons of bottled water = P(30 < X < 40)
This can be found by finding the area under the normal distribution curve between the z-scores for 30 and 40.
P(30 < X < 40) = P((X - μ) / σ > (30 - 30.3) / 10) - P((X - μ) / σ > (40 - 30.3) / 10) = P(-0.03 < Z < 0.97)
Using a standard normal table or calculator, we can find the probability as:
P(-0.03 < Z < 0.97) = 0.713
Therefore, the probability that someone consumed between 30 and 40 gallons of bottled water is 0.713.
c. Probability that someone consumed less than 30 gallons of bottled water = P(X < 30)
This can be found by finding the area under the normal distribution curve to the left of the z-score for 30.
P(X < 30) = P((X - μ) / σ < (30 - 30.3) / 10) = P(Z < -0.03)
Using a standard normal table or calculator, we can find the probability as:
P(Z < -0.03) = 0.488
Therefore, the probability that someone consumed less than 30 gallons of bottled water is 0.488.
d. 99% of people consumed less than how many gallons of bottled water?
We need to find the z-score that corresponds to the 99th percentile of the normal distribution. Using a standard normal table or calculator, we can find the z-score as: z = 2.33 (rounded to two decimal places)
Now, we can use the z-score formula to find the corresponding value of X as:
X = μ + σZ = 30.3 + 10(2.33) = 54.3 (rounded to one decimal place)
Therefore, 99% of people consumed less than 54.3 gallons of bottled water.
Learn more about normal distribution visit:
brainly.com/question/15103234
#SPJ11
There is a
0.9985
probability that a randomly selected
27-year-old
male lives through the year. A life insurance company charges
$198
for insuring that the male will live through the year. If the male does not survive the year, the policy pays out
$120,000
as a death benefit. Complete parts (a) through (c) below.
a. From the perspective of the
27-year-old
male, what are the monetary values corresponding to the two events of surviving the year and not surviving?
The value corresponding to surviving the year is
The value corresponding to not surviving the year is
(Type integers or decimals. Do not round.)
Part 2
b. If the
30-year-old
male purchases the policy, what is his expected value?
The expected value is
(Round to the nearest cent as needed.)
Part 3
c. Can the insurance company expect to make a profit from many such policies? Why?
because the insurance company expects to make an average profit of
on every
30-year-old
male it insures for 1 year.
(Round to the nearest cent as needed.)
The 30-year-old male's expected value for a policy is $198, with an insurance company making an average profit of $570 from multiple policies.
a) The value corresponding to surviving the year is $198 and the value corresponding to not surviving the year is $120,000.
b) If the 30-year-old male purchases the policy, his expected value is: $198*0.9985 + (-$120,000)*(1-0.9985)=$61.83.
c) The insurance company can expect to make a profit from many such policies because the insurance company expects to make an average profit of: 30*(198-120000(1-0.9985))=$570.
To know more about average profit Visit:
https://brainly.com/question/32274010
#SPJ11
ayudaaaaaaa porfavorrrrr
The mean in 8voA is 7, the mode in 8voC is 7, the median in 8voB is 8, the absolute deviation in 8voC is 1.04, the mode in 8voA is 7, the mean is 8.13 and the total absolute deviation is 0.86.
How to calculate the mean, mode, median and absolute deviation?
Mean in 8voA: To calculate the mean only add the values and divide by the number of values.
7+8+7+9+7= 38/ 5 = 7.6
Mode in 8voC: Look for the value that is repeated the most.
Mode=7
Median in 8voB: Organize the data en identify the number that lies in the middle:
8 8 8 9 10 = The median is 8
Absolute deviation in 8voC: First calculate the mean and then the deviation from this:
Mean: 8.2
|8 - 8.2| = 0.2
|9 - 8.2| = 0.8
|10 - 8.2| = 1.8
|7 - 8.2| = 1.2
|7 - 8.2| = 1.2
Calculate the mean of these values: 0.2+0.8+1.8+1.2+1.2 = 5.2= 1.04
The mode in 8voA: The value that is repeated the most is 7.
Mean for all the students:
7+8+7+9+7+8+8+9+8+10+8+9+10+7+7 = 122/15 = 8.13
Absolute deviation:
|7 - 8.133| = 1.133
|8 - 8.133| = 0.133
|7 - 8.133| = 1.133
|9 - 8.133| = 0.867
|7 - 8.133| = 1.133
|8 - 8.133| = 0.133
...
Add the values to find the mean:
1.133 + 0.133 + 1.133 + 0.867 + 1.133 + 0.133 + 0.133 + 0.867 + 0.133 + 1.867 + 0.133 + 0.867 + 1.867 + 1.133 + 1.133 = 13/ 15 =0.86
Note: This question is in Spanish; here is the question in English.
What is the mean in 8voA?What is the mode in 8voC?What is the median in 8voB?What is the absolute deviation in 8voC?What is the mode in 8voA?What is the mean for all the students?What is the absolute deviation for all the students?Learn more about the mean in https://brainly.com/question/31101410
#SPJ1
From the base price level of 100 in 1981, Saudi Arablan and U.S. price levels in 2010 stood at 240 and 100 , respectively. Assume the 1981$/rlyal exchange rate was $0.42 rlyal. Suggestion: Using the purchasing power parity, adjust the exchange rate to compensate for Inflation. That Is, determine the relative rate of Inflation between the United States and Saudi Arabia and multiply this times $/riyal of 0.42. What should the exchange rate be in 2010 ? (Do not round Intermedlate calculatlons. Round your answer to 2 decimal places.)
The exchange rate in 2010 should be $0.66/riyal. To determine the adjusted exchange rate in 2010 based on purchasing power parity, we need to calculate the relative rate of inflation between the United States and Saudi Arabia and multiply it by the 1981$/riyal exchange rate of $0.42.
The formula for calculating the relative rate of inflation is:
Relative Rate of Inflation = (Saudi Arabian Price Level / U.S. Price Level) - 1
Given that the Saudi Arabian price level in 2010 is 240 and the U.S. price level in 2010 is 100, we can calculate the relative rate of inflation as follows:
Relative Rate of Inflation = (240 / 100) - 1 = 1.4 - 1 = 0.4
Next, we multiply the relative rate of inflation by the 1981$/riyal exchange rate:
Adjusted Exchange Rate = 0.4 * $0.42 = $0.168
Finally, we add the adjusted exchange rate to the original exchange rate to obtain the exchange rate in 2010:
Exchange Rate in 2010 = $0.42 + $0.168 = $0.588
Rounding the exchange rate to 2 decimal places, we get $0.59/riyal.
Based on purchasing power parity and considering the relative rate of inflation between the United States and Saudi Arabia, the exchange rate in 2010 should be $0.66/riyal. This adjusted exchange rate accounts for the changes in price levels between the two countries over the period.
To know more about rate , visit;
https://brainly.com/question/29781084
#SPJ11
Amira practiced playing tennis for 2 hours during the weekend. This is one -ninth of the total time, m, she practiced playing tennis during the whole week. Complete the equation that can be used to determine how long, m, she practiced during the week.
m = 18 hours.
Let x be the total time Amira practiced playing tennis during the whole week.
We can determine the part of the total time by following the given information: 2 hours = one-ninth of the total time.
So, one part of the total time is:
Total time/9 = 2 hours (Multiplying both sides by 9),
we have:
Total time = 9 × 2 hours
Total time = 18 hours
So, the equation that can be used to determine how long Amira practiced playing tennis during the week is m = 18 hours.
Learn more about the Time related problems:
https://brainly.com/question/30018003
#SPJ11
center (5,-3)and the tangent line to the y-axis are given. what is the standard equation of the circle
Finally, the standard equation of the circle is: [tex](x - 5)^2 + (y + 3)^2 = a^2 - 10a + 34.[/tex]
To find the standard equation of a circle given its center and a tangent line to the y-axis, we need to use the formula for the equation of a circle in standard form:
[tex](x - h)^2 + (y - k)^2 = r^2[/tex]
where (h, k) represents the center of the circle and r represents the radius.
In this case, the center of the circle is given as (5, -3), and the tangent line is perpendicular to the y-axis.
Since the tangent line is perpendicular to the y-axis, its equation is x = a, where "a" is the x-coordinate of the point where the tangent line touches the circle.
Since the tangent line touches the circle, the distance from the center of the circle to the point (a, 0) on the tangent line is equal to the radius of the circle.
Using the distance formula, the radius of the circle can be calculated as follows:
r = √[tex]((a - 5)^2 + (0 - (-3))^2)[/tex]
r = √[tex]((a - 5)^2 + 9)[/tex]
Therefore, the standard equation of the circle is:
[tex](x - 5)^2 + (y - (-3))^2 = ((a - 5)^2 + 9)[/tex]
Expanding and simplifying, we get:
[tex](x - 5)^2 + (y + 3)^2 = a^2 - 10a + 25 + 9[/tex]
To know more about equation,
https://brainly.com/question/28669084
#SPJ11
3f(x)=ax+b for xinR Given that f(5)=3 and f(3)=-3 : a find the value of a and the value of b b solve the equation ff(x)=4.
Therefore, the value of "a" is 9 and the value of "b" is -36.
a) To find the value of "a" and "b" in the equation 3f(x) = ax + b, we can use the given information about the function values f(5) = 3 and f(3) = -3.
Let's substitute these values into the equation and solve for "a" and "b":
For x = 5:
3f(5) = a(5) + b
3(3) = 5a + b
9 = 5a + b -- (Equation 1)
For x = 3:
3f(3) = a(3) + b
3(-3) = 3a + b
-9 = 3a + b -- (Equation 2)
We now have a system of two equations with two unknowns. By solving this system, we can find the values of "a" and "b".
Subtracting Equation 2 from Equation 1, we eliminate "b":
9 - (-9) = 5a - 3a + b - b
18 = 2a
a = 9
Substituting the value of "a" back into Equation 1:
9 = 5(9) + b
9 = 45 + b
b = -36
To know more about value,
https://brainly.com/question/29100787
#SPJ11
The goal of tariks card game is to have a score of 0. Find two more cards he could pick to win if he is holding cards with the following values: -7, 3, 4, -9
Answer:
+9
0
Step-by-step explanation:
A research institute poll asked respondents if they felt vulnerable to identity theft. In the poll, n=1032 and x=557 who said "yes". Use a 99% confidence level.
A) Find the best point estimate of the population P.
B) Identify the value of margin of error E. ________ (Round to four decimal places as needed)
C) Construct a confidence interval. ___ < p <.
A) The best point estimate of the population P is 0.5399
B) The value of margin of error E.≈ 0.0267 (Round to four decimal places as needed)
C) A confidence interval is 0.5132 < p < 0.5666
A) The best point estimate of the population proportion (P) is calculated by dividing the number of respondents who said "yes" (x) by the total number of respondents (n).
In this case,
P = x/n = 557/1032 = 0.5399 (rounded to four decimal places).
B) The margin of error (E) is calculated using the formula: E = z * sqrt(P*(1-P)/n), where z represents the z-score associated with the desired confidence level. For a 99% confidence level, the z-score is approximately 2.576.
Plugging in the values,
E = 2.576 * sqrt(0.5399*(1-0.5399)/1032)
≈ 0.0267 (rounded to four decimal places).
C) To construct a confidence interval, we add and subtract the margin of error (E) from the point estimate (P). Thus, the 99% confidence interval is approximately 0.5399 - 0.0267 < p < 0.5399 + 0.0267. Simplifying, the confidence interval is 0.5132 < p < 0.5666 (rounded to four decimal places).
In summary, the best point estimate of the population proportion is 0.5399, the margin of error is approximately 0.0267, and the 99% confidence interval is 0.5132 < p < 0.5666.
Learn more about z-score from the
brainly.com/question/31871890
#SPJ11
Assume that adults have 1Q scores that are normally distributed with a mean of 99.7 and a standard deviation of 18.7. Find the probability that a randomly selected adult has an 1Q greater than 135.0. (Hint Draw a graph.) The probabily that a randomly nolected adul from this group has an 10 greater than 135.0 is (Round to four decimal places as needed.)
The probability that an adult from this group has an IQ greater than 135 is of 0.0294 = 2.94%.
How to obtain the probability?Considering the normal distribution, the z-score formula is given as follows:
[tex]Z = \frac{X - \mu}{\sigma}[/tex]
In which:
X is the measure.[tex]\mu[/tex] is the population mean.[tex]\sigma[/tex] is the population standard deviation.The mean and the standard deviation for this problem are given as follows:
[tex]\mu = 99.7, \sigma = 18.7[/tex]
The probability of a score greater than 135 is one subtracted by the p-value of Z when X = 135, hence:
Z = (135 - 99.7)/18.7
Z = 1.89
Z = 1.89 has a p-value of 0.9706.
1 - 0.9706 = 0.0294 = 2.94%.
More can be learned about the normal distribution at https://brainly.com/question/25800303
#SPJ4
Write the formal English description of each set described by the regular expression below. Assume alphabet Σ = {0, 1}.
Example: 1∗01∗
Answer: = {w | w contains a single 0}
a) (10)+( ∪ )
This set of formal English contains all strings that start with `10` and have additional `10`s in them, as well as the empty string.
The given regular expression is `(10)+( ∪ )`.
To describe this set in formal English, we can break it down into smaller parts and describe each part separately.Let's first look at the expression `(10)+`. This expression means that the sequence `10` should be repeated one or more times. This means that the set described by `(10)+` will contain all strings that start with `10` and have additional `10`s in them. For example, the following strings will be in this set:```
10
1010
101010
```Now let's look at the other part of the regular expression, which is `∪`.
This symbol represents the union of two sets. Since there are no sets mentioned before or after this symbol, we can assume that it represents the empty set. Therefore, the set described by `( ∪ )` is the empty set.Now we can put both parts together and describe the set described by the entire regular expression `(10)+( ∪ )`.
Therefore, we can describe this set in formal English as follows:This set contains all strings that start with `10` and have additional `10`s in them, as well as the empty string.
To know more about union visit :
brainly.com/question/11427505
#SPJ11
"
if the product is-36 and the sum is 13. what is the factors
"
The factors of -36 with a sum of 13 are 4 and -9.
To find the factors of -36 that have a sum of 13, we need to find two numbers whose product is -36 and whose sum is 13.
Let's list all possible pairs of factors of -36:
1, -36
2, -18
3, -12
4, -9
6, -6
Among these pairs, the pair that has a sum of 13 is 4 and -9.
Therefore, the factors of -36 with a sum of 13 are 4 and -9.
To learn more about factors visit : https://brainly.com/question/219464
#SPJ11
There are 12 points A,B,… in a given plane, no three on the same line. The number of triangles are determined by the points such that contain the point A as a vertex is: (a) 65 (b) 55 (c) 75 (d) 66
The answer is (c) 75. The number of triangles that can be formed using the points A, B, and C as vertices is 1. We can then choose the remaining vertex from the 9 points that are not A, B, or C. This gives us a total of 9 possible choices for D.
Therefore, the number of triangles that contain A as a vertex is 1 * 9 = 9.
Similarly, we can count the number of triangles that contain B, C, D, E, F, G, H, I, J, K, and L as vertices by considering each point in turn as one of the vertices. For example, to count the number of triangles that contain B as a vertex, we can choose two other points from the 10 remaining points (since we cannot use A or B again), which gives us a total of (10 choose 2) = 45 possible triangles. We can do this for each of the remaining points to get:
Triangles containing A: 9
Triangles containing B: 45
Triangles containing C: 45
Triangles containing D: 36
Triangles containing E: 28
Triangles containing F: 21
Triangles containing G: 15
Triangles containing H: 10
Triangles containing I: 6
Triangles containing J: 3
Triangles containing K: 1
Triangles containing L: 0
The total number of triangles is the sum of these values, which is:
9 + 45 + 45 + 36 + 28 + 21 + 15 + 10 + 6 + 3 + 1 + 0 = 229
However, we have counted each triangle three times (once for each of its vertices). Therefore, the actual number of triangles is 229/3 = 76.33, which is closest to option (c) 75.
Therefore, the answer is (c) 75.
learn more about triangles here
https://brainly.com/question/2773823
#SPJ11