Health High School

Which of the following is reported with a code from category Z95?

a. presence of xenogenic heart valve
b. adjustment of cardiac pacemaker
c. coronary angioplasty status without implant
d. complications of cardiac devices

Answers

Answer 1

The correct answer is d. complications of cardiac devices.

Category Z95 in the International Classification of Diseases, Tenth Revision, Clinical Modification (ICD-10-CM) is used to report the presence of cardiac and vascular implants and grafts, as well as any complications associated with them. This category is specifically designated for coding situations where there may be a need to indicate the presence of a device or report complications related to cardiac devices.

The options listed are as follows:

a. Presence of xenogenic heart valve: The presence of a xenogenic (derived from another species) heart valve would typically be reported with a code from category Z95 to indicate the implantation of the valve.

b. Adjustment of cardiac pacemaker: The adjustment or programming of a cardiac pacemaker is not specifically reported with a code from category Z95. Instead, the appropriate codes would be found in the ICD-10-CM section for cardiac pacemaker complications or encounters.

c. Coronary angioplasty status without implant: The status of coronary angioplasty without an implant would not be reported with a code from category Z95. Instead, codes related to the history of coronary angioplasty or current conditions resulting from the procedure may be used.

d. Complications of cardiac devices: Complications of cardiac devices, such as infections, malfunctions, or other adverse events, would typically be reported with a code from category Z95. This category provides specific codes for reporting complications associated with cardiac devices.

Therefore, the correct answer is d. complications of cardiac devices.

Learn more about Category Z95 from :

https://brainly.com/question/33618345

#SPJ11

Related Questions

Other Questions

The density of titanium is 4.51g/cm^3. What is the volume (incubic inches) of 3.5lb of Titanium? this could be helpful D=M/V PLS DO NOT POST AN ALREADY GIVEN ANSWER TO THIS QUESTION.DISCUSS ALL RELEVANT LEGAL ISSUESReview the following scenario and answer accompanying questions.Marianna's Boat Motor Manufacturing is located in Woodstock, Ontario. It is a non-unionized workplace that manufactures and distributes motors for personal watercraft to retail locations and marinas across Canada. Marianna's employs approximately 200 non-unionized employees. You have been provided the following facts.Employee #1: Jim has worked for Marina's Boat Manufacturing for five years. His performance appraisals, conducted yearly, were consistently "good" to "excellent". Nearly a year has passed since his last performance review. His manager contacted you to seek assistance with some concerns regarding Jim's performance. Jim's supervisor indicated that there were increasing performance issues. Jim is often on his phone, during busy shifts, at work. Although the employer recognizes some phone use may be necessary the manager believes that the phone use is interfering with production goals. He has not met the individual productivity goals in the last six calculation periods (calculated weekly). The supervisor also told you that Jim's colleagues came forward complaining that Jim smells of cannabis smoke occasionally after lunch.Employee #2 and #3: Mandy and Darci both work in the assembly plant. Recently, an internal investigation, that followed best practice for investigations, found Mandy and Darci had engaged in misconduct. The investigator found that the pair had stolen materials from the workplace. The materials included lumber, that were on site to create crates to transport the engines. There was also missing metal from the scrap pile. The manager has asked for guidance as to whether termination is possible.Employee #4: Mohammad has worked for the organization for 4 months. His manager approached you regarding performance issues. Mohammad consistently fails to use the proper procedures for packaging the engines. The manager is frustrated and would like to terminate Mohammad for cause.Assignment Question:What advice would you provide, as an HR consultant, for each employee? The response requires that students reference to course materials from multiple modules including legislation and case law.Pls use relevant case law. a) perform a linear search by hand for the array [20,20,10,0,15], loching for 0 , and showing each iteration one line at a time b) perform a binary search by hand fo the array [20,0,10,15,20], looking for 0 , and showing each iteration one line at a time c) perform a bubble surt by hand for the array [20,20,10,0,15], shouing each iteration one line at a time d) perform a selection sort by hand for the array [20,20,10,0,15], showing eah iteration one line at a time the appropriate way to make a correction on a patient care report is to: When advertisers consider running ads in American Life magazine, they have the option of buying geographic and demographic editions as well as the national edition. For instance, they can choose from editions targeted at professionals and managers, homeowners, working women, and people aged 50 and older. In addition, they are offered editions for 8 geographical regions and for the top 20 metropolitan areas. American Life also offers multiple-page discounts for advertisers buying four or more consecutive pages in any one edition, as well as other volume discounts.The basic rate to reach 2,847,600 readers in its national edition with a full-page, four-color advertisement is $91,300. The basic rate to reach the same 2,847,600 nationwide readers with a single-column, black-and-white ad is $31,300.(Scenario 12-2) Each medium under consideration in a media plan must be scrutinized for the efficiency with which it performs. In other words, an advertiser might select American Life because it delivers the largest target audiences at the lowest cost. What is the term to describe this?Group of answer choicesprice/cost transparencycost per thousandcost per rating pointnet promoter score If (a,b) and (c,d) are solutions of the system x^2y=1&x+y=18, the a+b+c+d= Note: Write vour answer correct to 0 decimal place. What is percent abundance of 18 medium nails 5 cm long? Create a standard main method. In the main method you need to: Create a Scanner object to be used to read things in - Print a prompt to "Enter the first number: ", without a new line after it. - Read an int in from the user and store it as the first element of num. Print a prompt to "Enter the second number: ", without a new line after it. - Read an int in from the user and store it as the second element of num. Print a prompt to "Enter the third number: ". without a new line after it. Read an int in from the user and store it as the third element of num. Print "The sum of the three numbers is sum>." , with a new line after it, where ssum> is replaced by the actual sum of the elements of num . Print "The average of the three numbers is replaced by the actual average (rounded down, so you can use integer division) of the the elements of num . mber that computers aren't clever, so note the Write the MATLAB code necessary to create the variables in (a) through (d) or calculate the vector computations in (e) through (q). If a calculation is not possible, set the variable to be equal to NaN, the built-in value representing a non-number value. You may assume that the variables created in parts (a) through (d) are available for the remaining computations in parts (e) through (q). For parts (e) through (q) when it is possible, determine the expected result of each computation by hand.(a) Save vector [3-25] in Va(b) Save vector-1,0,4]in Vb.(c) Save vector 19-46-5] in Vc.I(d) Save vector [7: -3, -4:8] in V(e) Convert Vd to a row vector and store in variable Ve.(f) Place the sum of the elements in Va in the variable S1.(9) Place the product of the last three elements of Vd in the variable P1.(h) Place the cosines of the elements of Vb in the variable C1. Assume the values in Vb are angles in radians.(i) Create a new 14-element row vector V14 that contains all of the elements of the four original vectors Va, Vb, Vc, and Vd. The elements should be in the same order as in the original vectors, with elements from Va as the first three, the elements from Vb as the next three, and so forth.(j) Create a two-element row vector V2 that contains the product of the first two elements of Vc as the first element and the product of the last two elements of Vc as the second element.(k) Create a two-element column vector V2A that contains the sum of the odd-numbered elements of Vc as the first element and thesum of the even-numbered elements of Vc as the second element.(l) Create a row vector ES1 that contains the element-wise sum of the corresponding values in Vc and Vd.(m) Create a row vector DS9 that contains the element-wise sum of the elements of Vc with the square roots of the corresponding elements of Vd.(n) Create a column vector EP1 that contains the element-wise product of the corresponding values in Va and Vb.(0) Create a row vector ES2 that contains the element-wise sum of the elements in Vb with the last three elements in Vd. (p) Create a variable S2 that contains the sum of the second elements from all four original vectors, Va, Vb, Vc, and Vd.(q) Delete the third element of Vd, leaving the resulting three-element vector in Vd Listening 2.3 - Libby Larson: "Kyrie" from Missa GaiaNo unread replies.55 replies.After listening to Listening 2.3, respond to the following questions:1. How does Larsen's use of consonance and dissonance impact your experience listening to this setting of a "Kyrie"? Be specific.2. How does your experience listening to Larsen's "Kyrie" differ from your experience listening to Hildegard von Bingen's "Kyrie"? Suppose that $\mu$ is a finite measure on $(X ,cal{A})$.Find and prove a corresponding formula for the measure of the unionof n sets. if a system's entire set of microoperations consists of 41 statements, how many bits must be used for its microop code? each of the following are likely to be found on a trade confirmation except Describe the different allotropes of carbon. Match the words in the left column to the appropriate blanks in the sentences on the right. Reset Help graphite In dispersion forces , carbon atoms are arranged in sheets. Within each sheet, the atoms are covalently bonded to one another by a network of sigma and pi bonds. Neighboring sheets are held together by Ionic bonds nanotubes In hydrogen bonds each carbon atom forma tour to four other carbon atoms in a tetrahedral geometry are long carbon structures, which consist of sheets of interconnected Cs rings that assume the shape of a cylinder (ike a roll of chicken wire) fullerenes covalent bonds diamond occur as soccer ball-shaped clusters of 60 carbon atoms (Co) and are black solids similar to graphite-the individual clusters are held to one another by What are the three categories of ceramics? Check all that apply. metallic ceramics hydride ceramics oxide ceramics silicate ceramics nonoxide ceramics borate ceramics nonmetallic ceramics Submit Province Anouare Dani What is the difference between the valence band and the conduction band? Match the words in the left column to the appropriate blanks in the sentence on the right. Reset Help valence band conduction band In band theory, electrons become mobile when they make a transition from the occupied molecular orbital into higher-energy empty molecular orbitals. For this reason, the occupied molecular orbitals are often called the and the unoccupied orbitals are called the highest lowest Review Constantie Consider the face centered cubic structure shown here Part A What is the length of the ine Gabeled e) that runs diagonaly across one of the faces of the cube in terms of the atomic radius? Express your answer in terms of C-4 Prvi An Correct Part Use the answer to Port And The Pythagoratheromo derive expression for the edge engine (t) in terms of Express your answer in terms of Submit Previous Answers Request Answer Review ContiPod Table Consider the body cerradbructure shown here Part A DO PI What is the length of their beled that runs from one comer of the cube diagonalt the center of the cube to the other comer in terms of the wome Express your answer in terms of Screen 020-07- Correct Part Use there there to drive an expression for the longth of the treated and diagonally across one of these be inform the edge 09 Post Express your newer in terms of OVO AL O Sub AM Review Constants Periodic Table Consider the body-centered Cubic structure shown here Part A What is the length of the line labeled c) that runs from one comer of the cube dagonally through the center of the cube to the other comes in terms of the atomic radial Express your answer in terms of Correct Part Use the moderne noget at ons only one of the focus of the cute in form the edge Express your answer in terms of IVOS - 5.6577 Submit * Incorrect; Try Again: 21 attempt remaining which approach to personality forcuses on describing individual differences? A ball of mass 0.500 kg is attached to a vertical spring. It is initially supported so that the spring is neither stretched nor compressed, and is then released from rest. When the ball has fallen through a distance of 0.108 m, its instantaneous speed is 1.30 m/s. Air resistance is negligible. Using conservation of energy, calculate the spring constant of the spring. use the accompanying table to calculate the output gap for each year. year real gdp (trillions of $) potential output (trillions of $) 2014 $17.11 $17.38 2015 $17.46 $17.69 2016 $17.78 $17.99 2017 $18.22 $18.29 2018 $18.77 $18.65 a. 2014 output gap: percent b. 2015 output gap: percent c. 2016 output gap: percent d. 2017 output gap: percent e. 2018 output gap: percent f. when there is a negative output gap, there are resources. g. what was the change in the output gap change between 2017 and 2018? change from 2017 to 2018: one cup of raw leafy greens is counted as 1 cup from the vegetable group. X1, X2, Xn~Unif (0, 1) Compute the sampling distribution of X2, X3 the percentage of members of a population who have a given trait at the time of a study"" what is this definition describing?