Answers
Answer:
B. 175 N
Explanation:
Net force can be defined as the vector sum of all the forces acting on a body or an object i.e the sum of all forces acting simultaneously on a body or an object.
Mathematically, net force is given by the formula;
[tex] Fnet = Fapp + Fg[/tex]
Where;
Fnet is the net force
Fapp is the applied force
Fg is the force due to gravitation
In this scenario, we observed that both forces are acting in the same direction.
Therefore:
Net force = 100 N + 75 N
Net force = 175 Newton
Related Questions
Which term BEST describes energy
stored in batteries and food?
potential energy
kinetic energy
heat energy
chemical energy
Answers
A positive charge is moving across a room from south to north. A magnetic field runs from east to west. In what direction is the magnetic force on the moving positive charge?
Answers
Answer:
the force is on the z axis, coming out of the blade
Explanation:
The direction of the magnetic force is given by the right hand rule,
For a positive charge, the thumb points in the direction of velocity, the other fingers extended in the direction of the magnetic field, and the palm points in the direction of force.
In this case.
Thumb points North
The fingers extended is in the east - west direction parallel to the blade
The palm is sticking out of the leaf, in the z direction
the answer is the force is on the z axis, coming out of the blade
A forensics investigator discharged an assault rifle-replica such that the bullet fired at an angle of 30 (degrees) off the horizontal with an initial velocity
of 28
m/s northwest. What is the maximum height the bullet will reach?
O 14 m/s
10 m
O 30 km
O 0.4351 seconds
Answers
Answer:
Initial y-component of speed
Vy = 28 * sin 30 = 14 m/sec vertically
1/2 m Vy^2 = 2 m g h conservation of energy of y-component
h = Vy^2 / (2 * g) = 14^2 / (2 * 9.8) = 10 m
Which object will take the most force
to accelerate? *
4 kg
6 kg
8 kg
02 kg
Answers
Answer:
I think it might be 8kg grams because it is bigger
What if the World turned to Gold?
Answers
Answer:
We would all freeze at close to absolute zero and gold will not be worth anything
Explanation:
A net force of 60 N north acts on an object with a mass of 30 kg. Use Newton's second law of
motion to calculate the amount of acceleration the object will experience. Then explain how the
amount of acceleration will change if the net force or the mass of the object increases.
Answers
Answer:
Explanation:
F = ma. For us, this looks like
60 = 30a and
a = 2 m/s/s
If the force goes up to, say, 90, then
90 = 30a and
a = 3...if the force goes up, the acceleration also goes up.
If the mass goes up to say, 60, and the force stays the same, then
60 = 60a and
a = 1...if the mass goes up, the acceleration goes down.
What are some core features of waves in physics?
Answers
Answer:
Waves are disorders that travel through a fluid medium. Several simple wave features include frequency, period, wavelength, and amplitude.
Explanation:
Einstein's theory of general relativity is currently the best explanation of gravity.Why has this theory not been replaced with a new one
Answers
Answer:
Option C, It still explains the experimental evidence pertaining to gravity
Explanation:
Please find the attachment
Answer:
A.) It will remain the best explanation, because no one has come up with a better one yet
Explanation:
The point A on the above graph is an example of
extrapolation
variation
interpolation
average method
Answers
Answer:
Interpolation
Explanation:
The graph shows that it falls between 2 values and interpolation means that you estimate the unknown values that fall between the 2 values. Hope this helps!
The data point A is between two given data points and it lies within the line connecting the data points, thus we can conclude that point A is an example of interpolation.
Extrapolation is the process of extending a line connecting the data points beyond the given data points to make inferences based on the previous trend of the data set. This helps us to understand what will happen in the future if the trend continues in the same manner.
Interpolation is the process of determining an unknown variable between two known variables. In this process the data point is located within the line connecting the data points.
In this given graph, the data point A is between two given data points and it lies within the line connecting the data points, thus we can conclude that point A is an example of interpolation.
Learn more here: https://brainly.com/question/11958294
the degree of hotness and coldness of th body is.......
Answers
Answer:
Explanation:
The degree of hotness and coldness of the body is called temperature.
which of the following is a vector physical quantity
a. speed
b. energy
c. mass
d. displacement
Answers
Answer:
D. displacement
Explanation:
Vector quantities have both magnitude and direction.
Scalar quantities have only magnitude.
What would the axes be labelled on a graph that allows you to calculate VELOCITY?
Answers
And velocity Velocity
Find the temperature of a mixture obtained by mixing 32 grams of water at a temperature of 22 degrees Celsius with 88 grams of water at a temperature of 75 degrees Celsius.
Answers
Answer:
60.87 °C
Explanation:
Applying,
Heat lost = heat gain
cm'(t₂-t₃) = cm(t₃-t₁).............. Equation 1
Equation 1 can futher be simplified to
m'(t₂-t₃) = m(t₃-t₁)................Equation 2
Where m' = mass of the hot water, m = mass of the cold water, t₁ = initial temperature of the cold water, t₂ = initial temperature of the hot water, t₃ = temperature of the mixture.
From the question,
Given: m' = 88 g, m = 32 g, t₁ = 22°C, t₂ = 75°C
Substitute these values into equation 2
88(75-t₃) = 32(t₃-22)
6600-88t₃ = 32t₃-704
32t₃+88t₃ = 6600+704
120t₃ = 7304
t₃ = 60.87 °C
(answer only if you know the answer or I'll report) Help me please solve it w steps
Answers
X component of force Fx=Fcos45=50×cos×45
Y component of force Fy=Fsin45=50×sin×45
HELP ASAP need it soon
Answers
Answer:
The answer to your question is given below.
Explanation:
The energy and frequency of a wave are related by the following equation:
E = hf
Where
E => is the energy.
h => is the Planck's constant.
f => is the frequency
From the formula i.e
E = hf
The energy is directly proportional to the frequency. Thus, an increase in the frequency of the wave will lead to an increase in the energy and a decrease in the frequency of the wave will lead to a decrease in the energy.
Considering the question given above, if the frequency of the wave is decreased, then the energy of the wave will also decrease.
what is a product made from no renewable resources
Answers
Answer:
a nail
Explanation:
Answer:
crude oil, natural gas, coal, and uranium. These are all resources that are processed into products that can be used commercially.
Explanation:
Does a feather fall as fast as a rock in a vacuum? If so why?
Answers
Answer:
No.
Explanation:
A feather is less dense and thus less force exerted while a rock is very dense thus exerting more force .
Two light waves of equal wavelength, lambda, are emitted in phase from separate sources and propagate to a common point P. Light wave 1 must travel a longer distance (d1) than light wave 2 (d2) to reach point P, where d1 – d2 is equal to the path difference between the two light waves. If the two waves interfere constructively at point P, what must be true about the path difference between the two light waves?
Answers
Answer:
The path difference must be equal to an integral (1 * lambda, 2 * lambda, -------n * lambda) number of wavelengths for constructive interference to occur.
After being assaulted by flying cannonballs, the knights on the castle walls (12.0 m above the ground) respond by propelling flaming pitch balls at their assailants. One ball lands on the ground at a distance of 81.1 m from the castle walls. If it was launched at an angle of 53.0° above the horizontal, what was its initial speed?
Answers
Answer:
28.6 m/s
Explanation:
Using the equation for the range of a projectile,
R = U²sin2θ/g where U = initial speed of flaming pitch balls, θ = launch angle = 53° and g = acceleration due to gravity = 9.8 m/s²
Making U subject of the formula, we have
U = √(gR/sin2θ)
substituting the values of the variables into the equation given that R = 81.1 m, we have
U = √(9.8 m/s² × 81.1 m/sin2(53°))
U = √(794.78 m²/s²/sin106°)
U = √(794.78 m²/s²/0.9613)
U = √(826.78 m²/s²)
U = 28.75 m/s
U ≅ 28.6 m/s
3. How do energy transformations, energy transfers, and conservation of energy allows you to track how energy moves through in a system?
Answers
Answer:
The law of conservation of energy states that when one form of energy is transformed to another, no energy is destroyed in the process. According to the law of conservation of energy, energy cannot be created or destroyed. So the total amount of energy is the same before and after any transformation
Explanation:
The energy in a system always transforms from one form to another without any significant loss or addition. It simply changes from one form to another with the effect of numerous external influences.
What is Energy transformation?Energy transformation may be defined as the process through which energy can convert from one form to another. It also illustrates the migration of energy from one place to another due to physical factors.
According to the law of conservation of energy, in a closed system energy can neither be created nor destroyed. The total amount of energy remains the same before and after the process of transformation.
Therefore, the energy in a system always transforms from one form to another without any significant loss or addition.
To learn more about Energy transformations, refer to the link:
https://brainly.com/question/16917873
#SPJ2
ik its a lot but can u help
Answers
Answer:
your correct ans is D.
object float in liquid when its density is less than liquid and sinks when its density is more than liquid..
stay safe healthy and happy.Moving along the elevtromagnetic spectrum from low frequency to high frequency, what , if anything, happens to the wavelength?
wavelength get longer
wavelength remains constant
the wavelengths get shorter
wavelength eventually disappear altogether
Answers
Explanation:
the wavelengths get shorter
20 POINTS:
Why does the initial hill of a roller coaster need to be steep?
Answers
Answer: A roller coaster does not have an engine to generate energy. The climb up the first hill is accomplished by a lift or cable that pulls the train up. This builds up a supply of potential energy that will be used to go down the hill as the train is pulled by gravity
Hope this helps! Good luck with future homework and exams!
If 150 Joules of work is needed to move a box 1000 cm, calculate the force that was used?
Answers
Answer:
[tex] \large{ \tt{☄ EXPLANATION}} : [/tex]
We're provided : Work ( W ) = 150 J & Displacement ( D ) = 1000 cm & We're asked to find out the force that was used. Firstly, Notice that we're provided the unit of Displacement as centimetre so we have to convert 1000 cm into m. Displacement ( D ) = [tex] \frac{1000}{ 100} = 10[/tex] m[tex] \large{ \tt{♡ \: LET'S \: GET \: STARTED}} : [/tex]
Work is defined as the product of force and Displacement. By definition ,[tex] \large{ \boxed{ \tt{❃ \: WORK ( \: W \: ) = FORCE\: ( \: F) \times DISPLACEMENT \: ( \: D \: )}}}[/tex]
- Plug the values and then simplify !
[tex] \large{ \bf{↦ \: 150 = F \times 10}}[/tex]
[tex] \large{ \bf{↦F\times 10 = 150}}[/tex]
[tex] \large{ \bf{↦ \: F = \frac{150}{10}}} [/tex]
[tex] \large {\bf{↦F = \boxed{ \bf{15} \: N}}}[/tex]
[tex] \boxed{ \boxed{ \large{ \tt{✤ \: OUR \: FINAL \: ANSWER : \boxed{ \bf{15 \: n}}}}}}[/tex]
KEEP READING , KEEP STUDYING , KEEP WORKING , KEEP PUSHING , KEEP TAKING CARE OF YOURSELF. YOUR HARD WORK WILL PAY OFF ! ♪ツ Hope I helped ! ۵
☪ Have a wonderful day / evening ! ☼
# StayInAndExplore ! ☂
▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁
Jorge tightens a bolt on his bicycle with a wrench that is 0.20 m long. If he pulls perpendicularly on the end of the wrench with a force of 140 N, how much torque does he apply ?
Answers
Answer:
28Nm
Explanation:
Torque is expressed as the prduct of force and radius
Given
Force = 140N
radius = 0.20m
Torque = 140 * 0.2
Torque = 140 * 1/5
Torque = 28Nm
Hence the amouunt of torque applied is 28Nm
A 4kg and 5kg bodies moving on a frictionless horizontal surface at a velocity of ( -6i )m/s and ( +3 )m/s respectively. Collide a head on elastic collision. What is the velocity ( magnitude and direction) of the each body after collision?
Answers
Answer:
4 kg → +4 m/s
5 kg → -5 m/s
Explanation:
The law of conservation of momentum states that:
m₁v₁ + m₂v₂ = m₁v₁' + m₂v₂'left side → velocities before collisionright side → velocities after collisionYou'll notice that we have two missing variables: v₁' & v₂'. Assuming this is a perfectly elastic collision, we can use the conservation of kinetic energy to set the initial and final velocities of the individual bodies equal to each other.
v₁ + v₁' = v₂ + v₂'Let's substitute all known variables into the first equation.
(4)(-6) + (5)(3) = (4)v₁' + (5)v₂' -24 + 15 = 4v₁' + 5v₂' -9 = 4v₁' + 5v₂'Let's substitute the known variables into the second equation.
(-6) + v₁' = (3) + v₂' -9 = -v₁' + v₂' 9 = v₁' - v₂'Now we have a system of equations where we can solve for v₁ and v₂.
-9 = 4v₁' + 5v₂' 9 = v₁' - v₂'Use the elimination method and multiply the bottom equation by -4.
-9 = 4v₁' + 5v₂' -36 = -4v₁' + 4v₂'Add the equations together.
-45 = 9v₂'-5 = v₂'The final velocity of the second body (5 kg) is -5 m/s. Substitute this value into one of the equations in the system to find v₁.
9 = v₁' - v₂'9 = v₁' - (-5) 9 = v₁' + 5 4 = v₁'The final velocity of the first body (4 kg) is 4 m/s.
We can verify our answer by making sure that the law of conservation of momentum is followed.
m₁v₁ + m₂v₂ = m₁v₁' + m₂v₂' (4)(-6) + (5)(3) = (4)(4) + (5)(-5)-24 + 15 = 16 - 25 -9 = -9The combined momentum of the bodies before the collision is equal to the combined momentum of the bodies after the collision. [✓]
Why does the needle of a compass point north?
a. Because the southern pole of the Earth's magnet repels it.
b. Because the southern pole of the Earth's magnet is in the north.
Because the northern pole of the Earth's magnet is in the north
d. Because the Earth's core is made of steel.
C.
Answers
Answer:
b. Because the southern pole of the Earth's magnet is in the north.
Explanation:
This is very weird to think about but Earth's southern magnetic pole is in Earth's geographic north. So when compass points north, it is actually getting attracted to the southern magnetic pole (that is actually located in the north direction- geographic location- in earth).
On what factors does critical velocity depend on
Answers
Explanation:
The critical velocity is that velocity of liquid flow, up to which its flow is streamlined (laminar)& above which its flow becomes turbulent. It's denoted by Vc & it depends upon: Coefficient of viscosity of liquid (η) Density of liquid. Radius of the tube.
A parallel combination of 3ohms and 4ohms resistor is connected in series with a resistor of 4ohms and a battery of negligible resistance. Calculate the effective resistance in the circuit
Answers
Answer:
Explanation:
Equivalent resistance of parallel combination of two resistors of 3 ohms and 4 ohms .
R₁ = 3 x 4 / ( 3 + 4 )
= 12 / 7 = 1.7 ohms .
This equivalent resistance is connected with 4 ohms in series
Total resistance = 1.7 ohms + 4 ohms
= 5.7 ohms.
Hence effective resistance of the circuit = 5.7 ohms .
Two rigid rods are oriented parallel to each other and to the ground. The rods carry the same current in the same direction. The length of each rod is 1.1 m, while the mass of each is 0.10 kg. One rod is held in place above the ground, and the other floats beneath it at a distance of 11 mm. Determine the current in the rods.
Answers
Answer:
220 A
Explanation:
The magnetic force on the floating rod due to the rod held close to the ground is F = BI₁L where B = magnetic field due to rod held close the ground = μ₀I₂/2πd where μ₀ = permeability of free space = 4π × 10⁻⁷ H/m, I₂ = current in rod close to ground and d = distance between both rods = 11 mm = 0.011 m. Also, I₁ = current in floating rod and L = length of rod = 1.1 m.
So, F = BI₁L
F = (μ₀I₂/2πd)I₁L
F = μ₀I₁I₂L/2πd
Given that the current in the rods are the same, I₁ = I₂ = I
So,
F = μ₀I²L/2πd
Now, the magnetic force on the floating rod equals its weight , W = mg where m = mass of rod = 0.10kg and g = acceleration due to gravity = 9.8 m/s²
So, F = W
μ₀I²L/2πd = mg
making I subject of the formula, we have
I² = 2πdmg/μ₀L
I = √(2πdmg/μ₀L)
substituting the values of the variables into the equation, we have
I = √(2π × 0.011 m × 0.1 kg × 9.8 m/s²/[4π × 10⁻⁷ H/m × 1.1 m])
I = √(0.01078 kgm²/s²/[2 × 10⁻⁷ H/m × 1.1 m])
I = √(0.01078 kgm²/s²/[2.2 × 10⁻⁷ H])
I = √(0.0049 × 10⁷kgm²/s²H)
I = √(0.049 × 10⁶kgm²/s²H)
I = 0.22 × 10³ A
I = 220 A