Answer:
4Hz (240 cycles/60 seconds = 4 cycles/second)
Explanation:
hope this helped!
A string is attached to the rear-view mirror of a car. A ball is hanging at the other end of the string. The car is driving around in a circle, at a constant speed. Which of the following lists gives all of the forces directly acting on the ball?
a. tension
b. tension and gravity
c. tension, gravity, and the centripetal force
d. tension, gravity, the centripetal force, and friction
Answer:
c. tension, gravity, and the centripetal force
Explanation:
The ball experiences a variety of force as explained below.
Gravity force acts on the body due to its mass and the acceleration due to gravity. The gravity force on every object on earth due to its mass keeps all object on the surface of the earth.
Although the car moves around in circle, centripetal towards the center of the radius of turn exists on the ball. This centripetal force is due to the constantly changing direction of the circular motion, resulting in a force away from the center. The centripetal force keeps the ball from swinging off away from the center of turn.
Tension force on the string holds the ball against falling towards the earth under its own weight, and also from swinging away from the center of turn of the car. Tension force holds the ball relatively fixed in its vertical position in the car.
Two plane mirrors are stood vertically making a right angle between them. How many images of an object close to and in front of the mirrors can be seen
Answer:
3
Explanation:
When two plane mirrors are placed side by side such that they make some angle, θ, with each other, the number of images, n, of an object placed close to and in front of these mirrors is given by;
n = (360 / θ) - 1 ------------(i)
From the question;
θ = 90° [since they stood making a right angle with each other]
Substitute this value into equation (i) as follows;
n = (360 / 90) - 1
n = 4 - 1
n = 3
Therefore, the number of images formed is 3
A positive kaon (K+) has a rest mass of 494 MeV/c² , whereas a proton has a rest mass of 938 MeV/c². If a kaon has a total energy that is equal to the proton rest energy, the speed of the kaon is most nearly:___________.
A. 0.25c
B. 0.40c
C. 0.55c
D. 0.70c
E. 0.85c
Answer:
0.85c
Explanation:
Rest mass of Kaon [tex]M_{0K}[/tex] = 494 MeV/c²
Rest mass of proton [tex]M_{0P}[/tex] = 938 MeV/c²
The rest energy is gotten by multiplying the rest mass by the square of the speed of light c²
for the kaon, rest energy [tex]E_{0K}[/tex] = 494c² MeV
for the proton, rest energy [tex]E_{0P}[/tex] = 938c² MeV
Recall that the rest energy, and the total energy are related by..
[tex]E[/tex] = γ[tex]E_{0}[/tex]
which can be written in this case as
[tex]E_{K}[/tex] = γ[tex]E_{0K}[/tex] ...... equ 1
where [tex]E[/tex] = total energy of the kaon, and
[tex]E_{0}[/tex] = rest energy of the kaon
γ = relativistic factor = [tex]\frac{1}{\sqrt{1 - \beta ^{2} } }[/tex]
where [tex]\beta = \frac{v}{c}[/tex]
But, it is stated that the total energy of the kaon is equal to the rest mass of the proton or its equivalent rest energy, therefore...
[tex]E_{K}[/tex] = [tex]E_{0P}[/tex] ......equ 2
where [tex]E_{K}[/tex] is the total energy of the kaon, and
[tex]E_{0P}[/tex] is the rest energy of the proton.
From [tex]E_{K}[/tex] = [tex]E_{0P}[/tex] = 938c²
equ 1 becomes
938c² = γ494c²
γ = 938c²/494c² = 1.89
γ = [tex]\frac{1}{\sqrt{1 - \beta ^{2} } }[/tex] = 1.89
1.89[tex]\sqrt{1 - \beta ^{2} }[/tex] = 1
squaring both sides, we get
3.57( 1 - [tex]\beta^{2}[/tex]) = 1
3.57 - 3.57[tex]\beta^{2}[/tex] = 1
2.57 = 3.57[tex]\beta^{2}[/tex]
[tex]\beta^{2}[/tex] = 2.57/3.57 = 0.72
[tex]\beta = \sqrt{0.72}[/tex] = 0.85
but, [tex]\beta = \frac{v}{c}[/tex]
v/c = 0.85
v = 0.85c
A pulley system is used at a dock to lift shipments of fish off a boat. If you apply a force of 100 N to the pulley, it pulls the shipment with a force of 830 N. a. What is the mechanical advantage of the pulley? b. The pulley has an efficiency of 80%. If you perform 600 J of work, how much useful work does the pulley do?
Explanation:
a. Mechanical advantage = force out / force in
MA = 830 / 100
MA = 8.3
b. Efficiency = work out / work in
0.80 = W / 600 J
W = 480 J
What accurately depicts the change in average kinetic energy of the particles undergoes in matter as the temperature of the sample is decreased?
Answer:
As a sample of matter is continually cooled, the average kinetic energy of its particles decreases. Eventually, one would expect the particles to stop moving completely. Absolute zero is the temperature at which the motion of particles theoretically ceases.
Explanation:
A parallel-plate air capacitor is connected to a constant-voltage battery. If the separation between the capacitor plates is doubled while the capacitor remains connected to the battery, the energy stored in the capacitor
1) drops to one-fourth its previous value.
2) quadruples.
3) becomes six times its previous value.
4) doubles.
5) drops to one-third its previous value.
6) Not enough information is provided.
7) triples.
8) drops to half its previous value.
9) drops to one-sixth its previous value.
10) remains unchanged.
Answer:
Drop to half of the previous value
Explanation:
Energy stored in capacitor is inversly propotional to the distance between the plates.
If the separation between the capacitor plates is doubled while the capacitor remains connected to the battery, the energy stored in the capacitor drops to half its previous value.
What is parallel plate capacitor?The two parallel plates placed at a distance apart used to store charge when electric supply is on.
The capacitance of a capacitor is given by
C = ε₀ A/d
where, ε₀ is the permittivity of free space, A = area of cross section of plates and d is the distance between them.
Capacitance is inversely proportional to the distance between them. So, if distance is doubled, the capacitance decreases to half its original value.
Thus, the correct option is 8.
Learn more about parallel plate capacitor.
https://brainly.com/question/12733413
#SPJ2
a certain plane parallel capacitor stores energy E when the plates have a charge Q on each plate. Then distance between the plates is double. In order to store triply as much energy, how much charge should it have in its plates
Answer:
[tex]Q'=\sqrt{6}Q[/tex]
Explanation:
You have that a parallel plate capacitor has a total energy of E when the distance between the plates is d and the charge on each plate is Q.
You take into account the following formula for the stored energy in the capacitor:
[tex]E=\frac{1}{2}\frac{Q^2}{C}[/tex] (1)
The capacitance C of the parallel plate capacitor is given by the following formula is:
[tex]C=\epsilon_o\frac{A}{d}[/tex] (2)
A: area of the plates
ε0: dielectric permittivity of vacuum
You replace the expression (2) into the equation (1):
[tex]E=\frac{1}{2}\frac{Q^2A}{\epsilon_o d}[/tex] (3)
the previous formula is the expression for the total energy stored for the given parameters A, d and Q.
If the distance between the plates is twice and it is required that the energy is three times the initial energy, to find the value of the charge you use the equation (3):
[tex]E'=\frac{1}{2}\frac{Q'^2A}{\epsilon_o d'}[/tex] (4)
d' = 2d
E' = 3E
Q': required charge
You replace the values of d' and E' in the equation (4) and then divide the result with the equation (3):
[tex]3E=\frac{1}{2}\frac{Q'^2A}{\epsilon_o(2d)}=\frac{1}{4}\frac{Q'^2A}{\epsilon_od}\\\\\frac{3E}{E}=\frac{1/4\frac{Q'^2A}{\epsilon_od}}{1/2\frac{Q^2A}{\epsilon_o d}}\\\\3=\frac{1}{2}\frac{Q'^2}{Q^2}[/tex]
Finally, you solve for Q':
[tex]3=\frac{1}{2}\frac{Q'^2}{Q^2}\\\\Q'=\sqrt{6}Q[/tex]
Then, the required charge is √6Q , to obtain three times the initial energy E, when the distance between plates is doubled.
some snakes have special sense organs that allow them to see the heat emitted from warm blooded animals what kind of an electromagnetic waves does the sense organs detect?
A. Visible light waves
B. Ultraviolet light waves
C. Infrared Waves
D. Microwaves
The heat emitted from anything is carried in the form of infrared waves. (C)
what is drift speed ? {electricity}
Answer: In physics a drift velocity is the average velocity attained by charged particles, such as electrons, in a material due to an electric field.
Explanation:
Can an object travel at the speed of
light? Why or why nbt?
Answer:
no the only things that can travel at the speed of light are waves in the electromagnetic spectrum
A ball is dropped from the top of an eleven-story building to a balcony on the ninth floor. In which case is the change in the potential energy associated with the motion of the ball the greatest
Answer:
at the top of the 9 story building i think
Explanation:
When the ball starts to move, its kinetic energy increases and potential energy decreases. Thus the ball will experience its maximum potential energy at the top height before falling.
What is potential energy?Potential energy of a massive body is the energy formed by virtue of its position and displacement. Potential energy is related to the mass, height and gravity as P = Mgh.
Where, g is gravity m is mass of the body and h is the height from the surface. Potential energy is directly proportional to mass, gravity and height.
Thus, as the height from the surface increases, the body acquires its maximum potential energy. When the body starts moving its kinetic energy progresses and reaches to zero potential energy.
Therefore, at the sate where the ball is at the top of the building it have maximum potential energy and then changes to zero.
To find more about potential energy, refer the link below:
https://brainly.com/question/24284560
#SPJ2
Raven throw a baseball directly downward from a terrace froma speed of 5.0 m/s. How fast it will be moving when it hits the path way 3.0 m below
Answer:
The speed of the ball at this distance is 9.15 m/s
Explanation:
Given;
initial speed of the baseball, U = 5.0 m/s.
distance traveled along the path way, h = 3 m
final speed of the baseball at this distance, V = ?
The baseball is falling under the influence of gravity.
Acceleration due to gravity, g is positive, since the baseball is falling towards its direction.
g = 9.8 m/s²
Apply the third kinematic equation;
V² = U² + 2gh
V² = 5² + 2 x 9.8 x 3
V² = 25 + 58.8
V² = 83.8
V = √83.8
V = 9.15 m/s
Therefore, the speed of the ball at this distance is 9.15 m/s
An amusement park ride has a vertical cylinder with an inner radius of 3.4 m, which rotates about its vertical axis. Riders stand inside against the carpeted surface and rotate with the cylinder while it accelerates to its full angular velocity. At that point the floor drops away and friction between the riders and the cylinder prevents them from sliding downward. The coefficient of static friction between the riders and the cylinder is 0.87. What minimum angular velocity in radians/second is necessary to assure that the riders will not slide down the wall?
Answer:
The minimum angular velocity necessary to assure that the riders will not slide down the wall is 1.58 rad/second.
Explanation:
The riders will experience a centripetal force from the cylinder
[tex]F_{C}[/tex] = mrω^2 .... equ 1
where
m is the mass of the rider
r is the inner radius of the cylinder = 3.4 m
ω is the angular speed of of the rider
For the riders not to slide downwards, this centripetal force is balanced by the friction between the riders and the cylinder. The frictional force is given as
[tex]F_{f}[/tex] = μR ....equ 2
where
μ = coefficient of friction = 0.87
R is the normal force from the rider = mg
where
m is the rider's mass
g is the acceleration due to gravity = 9.81 m/s
substitute mg for R in equ 2, we'll have
[tex]F_{f}[/tex] = μmg ....equ 3
Equating centripetal force of equ 1 and frictional force of equ 3, we'll get
mrω^2 = μmg
the mass of the rider cancels out, and we are left with
rω^2 = μg
ω^2 = μg/r
ω = [tex]\sqrt{\frac{ug}{r} }[/tex]
ω = [tex]\sqrt{\frac{0.87*9.81}{3.4} }[/tex]
ω = 1.58 rad/second
The minimum angular velocity necessary so that the riders will not slide down the wall is 1.58 rad/s
The riders will experience a centripetal force from the cylinder
[tex]F = mrw^2[/tex]
where m is the mass of the rider
r is the inner radius of the cylinder = 3.4 m
ω is the angular speed of the rider
For the riders not to slide downwards, this centripetal force must be balanced by friction. The frictional force is given as
f = μN
where
μ = coefficient of friction = 0.87
N is the normal force = mg
f = μmg
Equating centripetal force of and frictional force of we'll get
[tex]mrw^2 = umg[/tex]
[tex]rw^2 = ug[/tex]
[tex]w^2 = ug/r[/tex]
[tex]w= \sqrt{ug/r}[/tex]
[tex]w= \sqrt{0.87*9.8/3.4}[/tex]
ω = 1.58 rad/s is the minimum angular velocity needed to prevent the rider from sliding.
Learn more:
https://brainly.com/question/24638181
Suppose that the separation between two speakers A and B is 4.30 m and the speakers are vibrating in-phase. They are playing identical 103-Hz tones and the speed of sound is 343 m/s. An observer is seated at a position directly facing speaker B in such a way that his line of sight extending to B is perpendicular to the imaginary line between A and B. What is the largest possible distance between speaker B and the observer, such that he observes destructive interference
Answer:
The largest possible distance is [tex]x = 4.720 \ m[/tex]
Explanation:
From the question we are told that
The distance of separation is [tex]d = 4.30 \ m[/tex]
The frequency of the tone played by both speakers is [tex]f = 103 \ Hz[/tex]
The speed of sound is [tex]v_s = 343 \ m/s[/tex]
The wavelength of the tone played by the speaker is mathematically evaluated as
[tex]\lambda = \frac{v}{f}[/tex]
substituting values
[tex]\lambda = \frac{343}{103}[/tex]
[tex]\lambda = 3.33 \ m[/tex]
Let the the position of the observer be O
Given that the line of sight between observer and speaker B is perpendicular to the distance between A and B then
The distance between A and the observer is mathematically evaluated using Pythagoras theorem as follows
[tex]L = \sqrt{d^2 + x^2}[/tex]
Where x is the distance between the observer and B
For the observer to observe destructive interference
[tex]L - x = \frac{\lambda}{2}[/tex]
So
[tex]\sqrt{d^2 + x^2} - x = \frac{\lambda}{2}[/tex]
[tex]\sqrt{d^2 + x^2} = \frac{\lambda}{2} +x[/tex]
[tex]d^2 + x^2 = [\frac{\lambda}{2} +x]^2[/tex]
[tex]d^2 + x^2 = [\frac{\lambda^2}{4} +2 * x * \frac{\lambda}{2} + x^2][/tex]
[tex]d^2 = [\frac{\lambda^2}{4} +2 * x * \frac{\lambda}{2} ][/tex]
substituting values
[tex]4.30^2 = [\frac{3.33^2}{4} +2 * x * \frac{3.33}{2} ][/tex]
[tex]x = 4.720 \ m[/tex]
A guitar string 0.65 m long has a tension of 61 N and a mass per unit length of 3.0 g/m. (i) What is the speed of waves on the string when it is plucked? (ii) What is the string's fundamental frequency of vibration when plucked? (iii) At what other frequencies will this string vibrate?
Answer:
i
[tex]v = 142.595 \ m/s[/tex]
ii
[tex]f = 109.69 \ Hz[/tex]
iii1 )
[tex]f_2 =219.4 Hz[/tex]
iii2)
[tex]f_3 =329.1 Hz[/tex]
iii3)
[tex]f_4 =438.8 Hz[/tex]
Explanation:
From the question we are told that
The length of the string is [tex]l = 0.65 \ m[/tex]
The tension on the string is [tex]T = 61 \ N[/tex]
The mass per unit length is [tex]m = 3.0 \ g/m = 3.0 * \frac{1}{1000} = 3 *10^{-3 } \ kg /m[/tex]
The speed of wave on the string is mathematically represented as
[tex]v = \sqrt{\frac{T}{m} }[/tex]
substituting values
[tex]v = \sqrt{\frac{61}{3*10^{-3}} }[/tex]
[tex]v = 142.595 \ m/s[/tex]
generally the string's frequency is mathematically represented as
[tex]f = \frac{nv}{2l}[/tex]
n = 1 given that the frequency we are to find is the fundamental frequency
So
substituting values
[tex]f = \frac{142.595 * 1 }{2 * 0.65}[/tex]
[tex]f = 109.69 \ Hz[/tex]
The frequencies at which the string would vibrate include
1 [tex]f_2 = 2 * f[/tex]
Here [tex]f_2[/tex] is know as the second harmonic and the value is
[tex]f_2 = 2 * 109.69[/tex]
[tex]f_2 =219.4 Hz[/tex]
2
[tex]f_3 = 3 * f[/tex]
Here [tex]f_3[/tex] is know as the third harmonic and the value is
[tex]f_3 = 3 * 109.69[/tex]
[tex]f_3 =329.1 Hz[/tex]
3
[tex]f_3 = 4 * f[/tex]
Here [tex]f_4[/tex] is know as the fourth harmonic and the value is
[tex]f_3 = 4 * 109.69[/tex]
[tex]f_4 =438.8 Hz[/tex]
What if a solid cylinder of mass M = 2.50 kg, radius R = 2.18 cm, and length L = 2.7 cm, is rolling down from rest instead? With h = 79.60 m and x = 4.64 m, what is the center of mass velocity when the cylinder reaches the bottom?
Answer:
The center of mass velocity is [tex]v = 32.25 \ m/s[/tex]
Explanation:
From the question we are told that
The mass of the cylinder is [tex]m = 2.50 \ kg[/tex]
The radius is [tex]r = 2.18 \ cm = 0.0218 \ m[/tex]
The length is [tex]l = 2.7 \ cm = 0.027 \ m[/tex]
The height of the plane is h = 79.60 m
and the distance covered is [tex]d = 4.64 \ m[/tex]
The center of mass velocity o the cylinder when it reaches the bottom is mathematically represented as
[tex]v = \sqrt{\frac{4gh}{3} }[/tex]
substituting values
[tex]v = \sqrt{ \frac{4 * 9.8 * 79.60}{3} }[/tex]
[tex]v = 32.25 \ m/s[/tex]
What is the force per unit area at this point acting normal to the surface with unit nor- Side View √√ mal vector n = (1/ 2)ex + (1/ 2)ez ? Are there any shear stresses acting on this surface?
Complete Question:
Given [tex]\sigma = \left[\begin{array}{ccc}10&12&13\\12&11&15\\13&15&20\end{array}\right][/tex] at a point. What is the force per unit area at this point acting normal to the surface with[tex]\b n = (1/ \sqrt{2} ) \b e_x + (1/ \sqrt{2}) \b e_z[/tex] ? Are there any shear stresses acting on this surface?
Answer:
Force per unit area, [tex]\sigma_n = 28 MPa[/tex]
There are shear stresses acting on the surface since [tex]\tau \neq 0[/tex]
Explanation:
[tex]\sigma = \left[\begin{array}{ccc}10&12&13\\12&11&15\\13&15&20\end{array}\right][/tex]
equation of the normal, [tex]\b n = (1/ \sqrt{2} ) \b e_x + (1/ \sqrt{2}) \b e_z[/tex]
[tex]\b n = \left[\begin{array}{ccc}\frac{1}{\sqrt{2} }\\0\\\frac{1}{\sqrt{2} }\end{array}\right][/tex]
Traction vector on n, [tex]T_n = \sigma \b n[/tex]
[tex]T_n = \left[\begin{array}{ccc}10&12&13\\12&11&15\\13&15&20\end{array}\right] \left[\begin{array}{ccc}\frac{1}{\sqrt{2} }\\0\\\frac{1}{\sqrt{2} }\end{array}\right][/tex]
[tex]T_n = \left[\begin{array}{ccc}\frac{23}{\sqrt{2} }\\0\\\frac{27}{\sqrt{33} }\end{array}\right][/tex]
[tex]T_n = \frac{23}{\sqrt{2} } \b e_x + \frac{27}{\sqrt{2} } \b e_y + \frac{33}{\sqrt{2} } \b e_z[/tex]
To get the Force per unit area acting normal to the surface, find the dot product of the traction vector and the normal.
[tex]\sigma_n = T_n . \b n[/tex]
[tex]\sigma \b n = (\frac{23}{\sqrt{2} } \b e_x + \frac{27}{\sqrt{2} } \b e_y + \frac{33}{\sqrt{2} } \b e_z) . ((1/ \sqrt{2} ) \b e_x + 0 \b e_y +(1/ \sqrt{2}) \b e_z)\\\\\sigma \b n = 28 MPa[/tex]
If the shear stress, [tex]\tau[/tex], is calculated and it is not equal to zero, this means there are shear stresses.
[tex]\tau = T_n - \sigma_n \b n[/tex]
[tex]\tau = [\frac{23}{\sqrt{2} } \b e_x + \frac{27}{\sqrt{2} } \b e_y + \frac{33}{\sqrt{2} } \b e_z] - 28( (1/ \sqrt{2} ) \b e_x + (1/ \sqrt{2}) \b e_z)\\\\\tau = [\frac{23}{\sqrt{2} } \b e_x + \frac{27}{\sqrt{2} } \b e_y + \frac{33}{\sqrt{2} } \b e_z] - [ (28/ \sqrt{2} ) \b e_x + (28/ \sqrt{2}) \b e_z]\\\\\tau = \frac{-5}{\sqrt{2} } \b e_x + \frac{27}{\sqrt{2} } \b e_y + \frac{5}{\sqrt{2} } \b e_z[/tex]
[tex]\tau = \sqrt{(-5/\sqrt{2})^2 + (27/\sqrt{2})^2 + (5/\sqrt{2})^2} \\\\ \tau = 19.74 MPa[/tex]
Since [tex]\tau \neq 0[/tex], there are shear stresses acting on the surface.
A medieval city has the shape of a square and is protected by walls with length 500 m and height 15 m. You are the commander of an attacking army and the closest you can get to the wall is 100 m. Your plan is to set fire to the city by catapulting heated rocks over the wall (with an initial speed of 80 m/s). At what range of angles should you tell your men to set the catapult? (Assume the path of the rocks is perpendicular to the wall. Round your answers to one decimal place. Use g ≈ 9.8 m/s2. Enter your answer using interval notation. Enter your answer in terms of degrees without using a degree symbol.)
Answer:
θ₁ = 85.5º θ₂ = 12.98º
Explanation:
Let's analyze this projectile launch problem, the catapults are 100 m from the wall 15 m high, the objective is for the walls, let's look for the angles for which the rock stops touching the wall.
Let's write the equations for motion for this point
X axis
x = v₀ₓ t
x = v₀ cos θ t
Y axis
y = [tex]v_{oy}[/tex] t - ½ g t2
y = v_{o} sin θ t - ½ g t²
let's substitute the values
100 = 80 cos θ t
15 = 80 sin θ t - ½ 9.8 t²
we have two equations with two unknowns, so the system can be solved
let's clear the time in the first equation
t = 100/80 cos θ
15 = 80 sin θ (10/8 cos θ) - 4.9 (10/8 cos θ)²
15 = 100 tan θ - 7.656 sec² θ
we can use the trigonometric relationship
sec² θ = 1- tan² θ
we substitute
15 = 100 tan θ - 7,656 (1- tan² θ)
15 = 100 tan θ - 7,656 + 7,656 tan² θ
7,656 tan² θ + 100 tan θ -22,656=0
let's change variables
tan θ = u
u² + 13.06 u + 2,959 = 0
let's solve the quadratic equation
u = [-13.06 ±√(13.06² - 4 2,959)] / 2
u = [13.06 ± 12.599] / 2
u₁ = 12.8295
u₂ = 0.2305
now we can find the angles
u = tan θ
θ = tan⁻¹ u
θ₁ = 85.5º
θ₂ = 12.98º
Intuitively, which of the following would happen to E⃗ net if d became very large? E⃗ net should reduce to the field of a point charge of magnitude q. E⃗ net should reduce to the field of a point charge of magnitude 4q. The larger d becomes, the smaller the magnitude of E⃗ net will be. The larger d becomes, the greater the magnitude of E⃗ net will be. Enter the letters of all the correct answers in alphabetical order. Do not use commas. For instance, if you think that A and D are correct, enter AD.
Answer:
A C
Explanation:
The statement of the exercise is a bit strange, but if the distance between the load increases.
The following phenomena must occur.
* If the charge has a spatial distribution, the electric field should reduce the electric field of a point charge at the same distance
* As the distance increases the value of the electric field decreases in quadratic form
therefore when reviewing the correct answers are
if the total load is q, answer A is correct
and answer C is always correc
A uniform disk of 10 kg and radius 4.0 m can rotate in a horizontal plane about a vertical axis through its center. The disk is rotating at an angular velocity of 15 rad/s when a 5-kg package is dropped vertically on a point that is 2.0 m from the center of the disk. What is the angular velocity of the disk/package system
Answer:
18.75 rad/s
Explanation:
Moment of inertia of the disk;
I_d = ½ × m_disk × r²
I_d = ½ × 10 × 4²
I_d = 80 kg.m²
I_package = m_pack × r²
Now,it's at 2m from the centre, thus;
I_package = 5 × 2²
I_package = 20 Kg.m²
From conservation of momentum;
(I_disk + I_package)ω1 = I_disk × ω2
Where ω1 = 15 rad/s and ω2 is the unknown angular velocity of the disk/package system.
Thus;
Plugging in the relevant values, we obtain;
(80 + 20)15 = 80 × ω2
1500 = 80ω2
ω2 = 1500/80
ω2 = 18.75 rad/s
Consider a heat engine that inputs 10 kJ of heat and outputs 5 kJ of work. What are the signs on the total heat transfer and total work transfer
Answer:
Total heat transfer is positive
Total work transfer is positive
Explanation:
The first law of thermodynamics states that when a system interacts with its surrounding, the amount of energy gained by the system must be equal to the amount of energy lost by the surrounding. In a closed system, exchange of energy with the surrounding can be done through heat and work transfer.
Heat transfer to a system is positive and that transferred from the system is negative.
Also, work done by a system is positive while the work done on the system is negative.
Therefore, from the question, since the heat engine inputs 10kJ of heat, then heat is being transferred to the system. Hence, the sign of the total heat transfer is positive (+ve)
Also, since the heat engine outputs 5kJ of work, it implies that work is being done by the system. Hence the sign of the total work transfer is also positive (+ve).
You have a 2m long wire which you will make into a thin coil with N loops to generate a magnetic field of 3mT when the current in the wire is 1.2A. What is the radius of the coils and how many loops, N, are there
Answer:
radius of the loop = 7.9 mm
number of turns N ≅ 399 turns
Explanation:
length of wire L= 2 m
field strength B = 3 mT = 0.003 T
current I = 12 A
recall that field strength B = μnI
where n is the turn per unit length
vacuum permeability μ = [tex]4\pi *10^{-7} T-m/A[/tex] = 1.256 x 10^-6 T-m/A
imputing values, we have
0.003 = 1.256 x 10^−6 x n x 12
0.003 = 1.507 x 10^-5 x n
n = 199.07 turns per unit length
for a length of 2 m,
number of loop N = 2 x 199.07 = 398.14 ≅ 399 turns
since there are approximately 399 turns formed by the 2 m length of wire, it means that each loop is formed by 2/399 = 0.005 m of the wire.
this length is also equal to the circumference of each loop
the circumference of each loop = [tex]2\pi r[/tex]
0.005 = 2 x 3.142 x r
r = 0.005/6.284 = [tex]7.9*10^{-4} m[/tex] = 0.0079 m = 7.9 mm
A railroad boxcar rolls on a track at 2.90 m/s toward two identical coupled boxcars, which are rolling in the same direction as the first, but at a speed of 1.20 m/s. The first reaches the second two and all couple together. The mass of each is 3.05 ✕ 104 kg.(a)What is the speed (in m/s) of the three coupled cars after the first couples with the other two? (Round your answer to at least two decimal places.)Incorrect: Your answer is incorrect.What is the momentum of the two coupled cars? What is the momentum of the first car in terms of its mass and initial speed? Note all cars are initially traveling in the same direction. Apply conservation of momentum to find the final speed. m/s(b)Find the (absolute value of the) amount of kinetic energy (in J) converted to other forms during the collision.J
Answer:
momentum of the coupled cars V = 1.77 m/s
kinetic energy coverted to other forms during the collision ΔK.E = -2.892×10⁴J
Explanation:
given
m₁ =3.05 × 10⁴kg
u₁ =2.90m/s
m₂=6.10× 10⁴kg
u₂=1.20m/s
using law of conservation of momentum
m₁u₁ + m₂u₂ = (m₁ + m₂) V
3.05 × 10⁴ ×2.90 + 6.10× 10⁴× 1.20 = (9.15×10⁴)V
V = 1.617×10⁵/9.15×10⁴
V = 1.77m/s
K.E =1/2mV²
ΔK.E = K.E(final) - K.E(initial)
ΔK.E = ¹/₂ × 9.15×10⁴ ×(1.77)² - ¹/₂ ×3.05 × 10⁴ × (2.90)² -¹/₂ × 6.10× 10⁴× (1.20)²
ΔK.E = ¹/₂ × (28.67-25.65-8.784) ×10⁴
ΔK.E = -2.892×10⁴J
The final speed is 1.77 m/s
The initial momentum is 8.84 × 10⁴ kgm/s [first car] and 7.3 × 10⁴ kgm/s [coupled car]
2.892×10⁴J of energy is converted.
Inelastic collision:Since the first boxcar collides and couples with the two coupled boxcars, the collision is inelastic. In an inelastic collision, the momentum of the system is conserved but there is a loss in the total kinetic energy of the system.
Let the mass of the railroad boxcar be m₁ =3.05 × 10⁴kg
The initial speed of the railroad boxcar is u₁ = 2.90m/s
Mass of the two coupled boxcars m₂ = 2 × 3.05 × 10⁴kg = 6.10× 10⁴kg
And the initial speed be u₂ = 1.20m/s
The initial momentum of the first car is:
m₁u₁ = 3.05 × 10⁴ × 2.90 = 8.84 × 10⁴ kgm/s
The initial momentum of the coupled car is:
m₁u₁ = 6.10 × 10⁴ × 1.20 = 7.3 × 10⁴ kgm/s
Let the final speed after all the boxcars are coupled be v
From the law of conservation of momentum, we get:
m₁u₁ + m₂u₂ = (m₁ + m₂)v
3.05 × 10⁴ ×2.90 + 6.10× 10⁴× 1.20 = (9.15×10⁴)Vv
v = 1.617×10⁵/9.15×10⁴
v = 1.77m/s
The difference between initial and final kinetic energies is the amount of energy converted into other forms, which is given as follows:
ΔKE = K.E(final) - K.E(initial)
ΔKE = ¹/₂ × 9.15×10⁴ ×(1.77)² - ¹/₂ ×3.05 × 10⁴ × (2.90)² -¹/₂ × 6.10× 10⁴× (1.20)²
ΔKE = ¹/₂ × (28.67-25.65-8.784) ×10⁴
ΔKE = -2.892×10⁴J
Learn more about inelastic collision:
https://brainly.com/question/13861542?referrer=searchResults
Two vehicles approach an intersection, a 2500kg pickup travels from E to W at 14.0m/s and a 1500kg car from S to N at 23.0m/s. Find P net of this system (direction and magnitude)
Answer:
The magnitude of the momentum is 49145.19 kg.m/s
The direction of the two vehicles is 44.6° North West
Explanation:
Given;
speed of first vehicle, v₁ = 14 m/s (East to west)
mass of first vehicle, m₁ = 1500 kg
speed of second vehicle, v₂ = 23 m/s (South to North)
momentum of the first vehicle in x-direction (E to W is in negative x-direction)
[tex]P_x = mv_x\\\\P_x = 2500kg(-14 \ m/s)\\\\P_x = -35000 \ kg.m/s[/tex]
momentum of the second vehicle in y-direction (S to N is in positive y-direction)
[tex]P_y = m_2v_y\\\\P_y = 1500kg(23 \ m/s)\\\\P_y = 34500 \ kg.m/s[/tex]
Magnitude of the momentum of the system;
[tex]P= \sqrt{P_x^2 + P_y^2} \\\\P = \sqrt{(-35000)^2+(34500)^2} \\\\P = 49145.19 \ kg.m/s[/tex]
Direction of the two vehicles;
[tex]tan \ \theta = \frac{P_y}{|P_x|} \\\\tan \ \theta = \frac{34500}{35000} \\\\tan \ \theta = 0.9857\\\\\theta = tan^{-1} (0.9857)\\\\\theta = 44.6^0[/tex]North West
A man stands on a merry-go-round that is rotating at 2.5 rad/s. If the coefficient of static friction between the man’s shoes and the merry-go-round is µs = 0.5, how far from the axis of rotation can he stand without sliding?
Answer:
0.8 m
Explanation:
Draw a free body diagram. There are three forces:
Weight force mg pulling down,
Normal force N pushing up,
and friction force Nμ pushing towards the center.
Sum of forces in the y direction:
∑F = ma
N − mg = 0
N = mg
Sum of forces in the centripetal direction:
∑F = ma
Nμ = m v²/r
Substitute and simplify:
mgμ = m v²/r
gμ = v²/r
Write v in terms of ω and solve for r:
gμ = ω²r
r = gμ/ω²
Plug in values:
r = (10 m/s²) (0.5) / (2.5 rad/s)²
r = 0.8 m
The distance (radius) from the axis of rotation which the man can stand without sliding is 0.784 meters.
Given the following data:
Angular speed = 2.5 rad/s.Coefficient of static friction = 0.5To determine how far (radius) from the axis of rotation can the man stand without sliding:
We would apply Newton's Second Law of Motion, to express the centripetal and force of static friction acting on the man.
[tex]\sum F = \frac{mv^2}{r} - uF_n\\\\\frac{mv^2}{r} = uF_n[/tex]....equation 1.
But, Normal force, [tex]F_n = mg[/tex]
Substituting the normal force into eqn. 1, we have:
[tex]\frac{mv^2}{r} = umg\\\\\frac{v^2}{r} = ug[/tex]....equation 2.
Also, Linear speed, [tex]v = r\omega[/tex]
Substituting Linear speed into eqn. 2, we have:
[tex]\frac{(r\omega )^2}{r} = ug\\\\r\omega ^2 = ug\\\\r = \frac{ug}{\omega ^2}[/tex]
Substituting the given parameters into the formula, we have;
[tex]r = \frac{0.5 \times 9.8}{2.5^2} \\\\r = \frac{4.9}{6.25}[/tex]
Radius, r = 0.784 meters
Read more: https://brainly.com/question/13754413
the amount of surface area of the block contact with the surface is 2.03*10^-2*m2 what is the average pressure exerted on the surface by the block
Complete question:
A block of solid lead sits on a flat, level surface. Lead has a density of 1.13 x 104 kg/m3. The mass of the block is 20.0 kg. The amount of surface area of the block in contact with the surface is 2.03*10^-2*m2, What is the average pressure (in Pa) exerted on the surface by the block? Pa
Answer:
The average pressure exerted on the surface by the block is 9655.17 Pa
Explanation:
Given;
density of the lead, ρ = 1.13 x 10⁴ kg/m³
mass of the lead block, m = 20 kg
surface area of the area of the block, A = 2.03 x 10⁻² m²
Determine the force exerted on the surface by the block due to its weight;
F = mg
F = 20 x 9.8
F = 196 N
Determine the pressure exerted on the surface by the block
P = F / A
where;
P is the pressure
P = 196 / (2.03 x 10⁻²)
P = 9655.17 N/m²
P = 9655.17 Pa
Therefore, the average pressure exerted on the surface by the block is 9655.17 Pa
(c) If you want the beam to undergo total internal reflection at the second interface (the interface between sheet 1 and the air), what is the minimum angle the incoming beam (the beam traveling in the sheet 2) must make with the x-axis
Answer:
33.749
Explanation:
According to the given situation, the solution of the minimum angle is shown below:-
We will apply the law to no and n1 medium which is
[tex]1.8\times sin(\theta_2)=1\times sin90[/tex]
[tex]\theta_2 = sin^{-1} \frac{1}{1.8}[/tex]
After solving the above equation we will get
= 33.749
Therefore for computing the minimum angle we simply applied the above formula.
Hence, the correct answer is 33.749
Find the magnitude of the resultant of forces 6N and 8N acting at 240° to each other
Answer:
magnitude of the resultant of forces is 11.45 N
Explanation:
given data
force F1 = 6N
force F2 = 8N
angle = 240°
solution
we get here resultant force that is express as
F(r) = [tex]\sqrt{F_1^2+F_2^2+2F_1F_2cos\ \theta}[/tex] ..............1
put here value and we get
F(r) = [tex]\sqrt{6^2+8^2+2\times 6\times 8 \times cos240}[/tex]
F(r) = 11.45 N
so magnitude of the resultant of forces is 11.45 N
Why can a magnetic monopole not exist, assuming Maxwell's Equations are currently correct and complete?
Answer:
Because closed magnetic field loops have to be formed between both ends of the magnet, a magnet will always have two poles.
Explanation:
Magnetic Monopoles do not exist in nature because a magnetic field always forms a loop that runs from one end of the magnet to the other.
Since this loop of the magnetic field has an origination and termination point which are at the two ends of the magnet (North and South poles). A magnet will always be bipolar which is in this case, North and South; even at an atomic level.
An electron has a kinetic energy that is twice its rest energy. Determine its speed. Group of answer choices
Answer:
The speed of the electron will be 6x10^8m/s
Explanation:
See attached file