A survey of 1282 student loan borrowers found that 440 had loans totaling more than $20,000 for their undergraduate education. Give a 98% confidence interval for the proportion of all student loan borrowers who have loans of $20,000 or more for their undergraduate education. (Give answers accurate to 3 decimal places.)

Answer:

$1.00

Step-by-step explanation:

The unit rate in this scenario would be $1.00 , meaning that Toni is paying $1.00 for every shirt. This can be calculated by dividing the total price that she is paying for the shirts by the total number of shirts that Toni is purchasing like so...

$8.00 / 8 = $1.00 per shirt

The unit rate is basically the value over the denominator of 1 which would be the case as seen above since $1 buys 1 shirt ([tex]\frac{1 dollar}{1 shirt}[/tex]) as opposed to $8 dollars 8 shirts ([tex]\frac{8 dollars}{8 shirts}[/tex]) as mentioned in the question.

Answer:

The probability will be "0.205".

Step-by-step explanation:

The probability that perhaps the time remains greater than 9.5 days before the next shift will indeed be:

⇒  [tex]P(X>9.5)[/tex]

⇒  [tex]1-P(X<9.5)[/tex]

⇒  [tex]1-(1-exp(\frac{-9.5}{6} ))[/tex]

⇒  [tex]0.205[/tex]

Answer:

-44ax^2-198x^2+66a+297

Step-by-step explanation:

there

Answer:

Step-by-step explanation:

The Order of Operations is very important when simplifying expressions and equations. The Order of Operations is a standard that defines the order in which you should simplify different operations such as addition, subtraction, multiplication and division.

This standard is critical to simplifying and solving different algebra problems. Without it, two different people may interpret an equation or expression in different ways and come up with different answers. The Order of Operations is shown below.

Parentheses and Brackets -- Simplify the inside of parentheses and brackets before you deal with the exponent (if any) of the set of parentheses or remove the parentheses.

Exponents -- Simplify the exponent of a number or of a set of parentheses before you multiply, divide, add, or subtract it.

Multiplication and Division -- Simplify multiplication and division in the order that they appear from left to right.

Addition and Subtraction -- Simplify addition and subtraction in the order that they appear from left to right.

Before we begin simplifying problems using the Order of Operations, let's examine how failure to use the Order of Operations can result in a wrong answer to a problem.

Without the Order of Operations one might decide to simplify the problem working left to right. He or she would add two and five to get seven, then multiply seven by x to get a final answer of 7x. Another person might decide to make the problem a little easier by multiplying first. He or she would have first multiplied 5 by x to get 5x and then found that you can't add 2 and 5x so his or her final answer would be 2 + 5x. Without a standard like the Order of Operations, a problem can be interpreted many different ways

We cannot combine the variable terms before using the distributive property when solving the equation as it will results in wrong answer.

What is distributive property of multiplication over addition ?

If we multiply a number by the sum of more than two, we use the distributive property of multiplication over addition.

Here the expression given is :

7(x+5)-x=42

The Order of Operations is very important when simplifying expressions and equations. The Order of Operations is a standard that defines the order in which you should simplify different operations such as addition, subtraction, multiplication and division.

Parentheses and Brackets -- Simplify the inside of parentheses and brackets before you deal with the exponent (if any) of the set of parentheses or remove the parentheses.

Exponents -- Simplify the exponent of a number or of a set of parentheses before you multiply, divide, add, or subtract it.

Multiplication and Division -- Simplify multiplication and division in the order that they appear from left to right.

Addition and Subtraction -- Simplify addition and subtraction in the order that they appear from left to right.

Without the Order of Operations one might decide to simplify the problem working left to right. He or she would add two and five to get seven, then multiply seven by x to get a final answer of 7x. Another person might decide to make the problem a little easier by multiplying first. He or she would have first multiplied 5 by x to get 5x and then found that you can't add 2 and 5x so his or her final answer would be 2 + 5x. Without a standard like the Order of Operations, a problem can be interpreted many different ways.

Read more about property of multiplication here :

https://brainly.com/question/14391436

#SPJ2

Answer:

15 if b is supposed to the side length, √15 if b is the base which is a square.

Step-by-step explanation:

Answer:

Yes, this relation is a function.

Step-by-step explanation:

It is a function because every input (left side) only has one output (right side). It doesn't matter if an output has multiple inputs. As long as an input has only one output, it is a function

Ex: 3 = 8 & 7     NOT an input

4 & 3 = 8          AN input

Answer:

1/2

Step-by-step explanation:

1/2 would be the best fraction to represent how much he saves.

Answer:

VW = 36

Step-by-step explanation:

From the question, we are given:

VW = 5x - 4, UV = 2x,

UW = 52

Hence,

UV + VW= UW

2x + 5x - 4 = 52

7x = 52 + 4

7x = 56

x = 56/7

x = 8

VW = 5x - 4,

VW = 5(8) - 4

VW = 40 - 4

VW = 36

Answer:

sometimes true

Step-by-step explanation:

Answer:

Step-by-step explanation:

First find the angle in the lower left.

180 - 100 = 80

3x + 2x + 80 = 360

solve for x

5x = 280

5x/5 = 280/ 5

x = 56

Plug this in to make sure the equation is true

3(56) + 2(56) + 80 = 360

168 + 112 + 80 = 360

360 =360

Therefore x = 56

Complete question is;

A 10 cm thick grindstone is initially 200 cm in diameter, and it is wearing away at a rate of 50 cm/hr. At what rate is its diameter decreasing?

Answer:

Diameter is decreasing at the rate of 5/(2πr) cm/hr

Step-by-step explanation:

We are told the stone is wearing away at a rate of 50 cm/hr. This means the volume is decreasing. Thus;

dV/dt = -50 cm/hr

Now, a grindstone is in the shape of a cylinder. Thus, volume of grindstone is;

V = πr²h

dV/dr = 2πrh

Now,to find the rate at which the diameter is decreasing, we'll write;

dr/dt = (dV/dt)/(dV/dr)

dr/dt = -50/(2πrh)

We are given;

Diameter = 200 cm

Radius; r = 200/2 = 100 cm

Thickness; h = 10 cm

Thus;

dr/dt = -50/(2π × r × 10)

dr/dt = -5/(2πr) cm/hr

The rate at which grindstone diameter decreases is [tex]-5/2\pi r \;{\rm cm/hr}[/tex] and this can be determined by using the given data.

Given :

A 10 cm thick grindstone is initially 200 cm in diameter and it is wearing away at a rate of 50 [tex]\rm cm^3/hr[/tex].

The following steps can be used in order to determine the rate at which grindstone diameter decreases:

Step 1 - According to the given data, the rate at which grindstone volume decreases is:

[tex]\dfrac{dV}{dt} = 50\;{\rm cm^3/hr}[/tex]        --- (1)

Step 2 -  The formula of the volume of the cylinder (grindstone) is given below:

[tex]V = \pi r^2 h[/tex]

Step 3 - Differentiate the above expression with respect to 'r'.

[tex]\dfrac{dV}{dr} = 2\pi r h[/tex]          --- (2)

Step 4 - So, using the expression (1) and (2) the rate at which grindstone diameter decreases is:

[tex]\dfrac{dr}{dt}=\dfrac{\frac{dV}{dt}}{\frac{dV}{dr}}[/tex]

[tex]\dfrac{dr}{dt}=\dfrac{-50}{2\pi r \times 10}\\[/tex]

[tex]\dfrac{dr}{dt} = -\dfrac{5}{2\pi r }\; {\rm cm/hr}[/tex]

So, the rate at which grindstone diameter decreases is [tex]-5/2\pi r \;{\rm cm/hr}[/tex].

For more information, refer to the link given below:

https://brainly.com/question/12748872

Answer:x= -3/8

Step-by-step explanation:

Answer:

-3/8

Step-by-step explanation:

4(3-2x)=15

-3/8

Answer: 95x

Step-by-step explanation: Remove parentheses. 5x(7+10-2+4)

Add 7 and 10.

5x(17-2+4)

Add 15 and 4.

5x multiped by 19

Multiply 19 by 5

95x

Answer:

942.50

Step-by-step explanation:

725×30% or 0.3 = 217.5

217.5+725=942.5

Answer:

answer is 9 in th by form of the good answer is the to k=9.0 10á gd gd

Answer:

Yes it is the same. Since the total distance left behind per time unit would be the same. Just that He would Do that by himself.

Answer:

yes

Step-by-step explanation:

Answer:

[tex] y = \frac{2}{3}x - 6 [/tex]

Step-by-step explanation:

Recall that the the equation of a line in slope-intercept form is given as [tex] y = mx + b [/tex].

m = the slope of the line

b = the y-intercept. This is the point at which the line intercepts the y-axis.

We are given:

slope (m) = ⅖

y-intercept (b) = -6

All you need to do to get an equation of the line is to simply substitute m = ⅔ and b = -6 into [tex] y = mx + b [/tex].

[tex] y = \frac{2}{3}x + (-6) [/tex]

[tex] y = \frac{2}{3}x - 6 [/tex]

The equation for the line is .[tex] y = \frac{2}{3}x - 6 [/tex]

Answer:

-4w+4

Step-by-step explanation:

Answer:

-4w+4 Is te correct answer

Answer:

y-7/ 12y+3

Step-by-step explanation:

Answer:

Step-by-step explanation:

75

1) The domain is [0,300]. The range is [0,250]

2) The slope for the initial climb is 3.57. The equation of the line is

3) The rate of change of the second hill is -1.4

4) The rate of change of the third hill is -2.1

5) The blue hill is steeper

6) It is not a function

Step-by-step explanation:

1)

The domain of a function is the set of values of x (the input) for which the function itself is defined.

Instead, the range of a function is the set of values of y (the output) that the function can take.

To find the domain, we have to look at the x-axis and see for which values of x the function is defined. By looking at the graph, we see that the function is defined between

x = 0 and x = 300

So, the domain is [0,300].

To find the range, we have to look at the y-axis and see for which values of y the function has an output. By looking at the graph, we see that the function has values of y between

y = 0 and x = 250

So, the range is [0,250].

2)

The slope of a function in a certain range is given by

where

is the change in the y-coordinate

is the change in the x-coordinate

For the initial climb (pink line), we have:

Therefore, the slope in this part is

We can now write the equation of the line in the form

y = mx + b

where b is the y-intercept: since it is zero, the line has simply the form

3)

Again, to calculate the slope of the hill, we use:

where

is the change in the y-coordinate

is the change in the x-coordinate

For the green hill, we have:

So the rate of change is

4)

As before, the rate of change of the hill is

For the blue hill, we have:

So the rate of change is

5)

To know which hill is steeper, we need to compare the magnitude of their rate of change.

In fact, both hills have rate of change negative - because we are going down along the slope. Therefore, we have to consider the magnitude of their slope.

For the green hill:

For the blue hill:

We see that the blue hill has a greater slope (in magnitude): therefore, the blue hill is steeper.

6)

A function is defined as a mapping (operation between two sets of variables) in which to one value of x (the input) corresponds one and only one value of y (the output).

This means that a function cannot have multiple values of y for the same x (the input).

By looking at the graph, we see that this function does not respect this criterium: in fact, we see that certain values of x give multiple values of the output, y (for instance, at x=300 the function has two values). So, this is not a function.

Answer:

1.34%

Step-by-step explanation:

In order to find the percentage increase between these two prices, we must first find the difference in price. We calculate this by subtracting the final price by the initial price like so...

$9.84 - 9.71 = 0.13

Now we divide the difference by the initial price to find what percentage of the initial price this difference is, since this percentage difference was added to the initial price to get the new and final price point.

0.13 / 9.71 = 0.013388 ... multiply by 100 to get percent value

0.013388 * 100 = 1.3388% or 1.34% rounded.

Answer:

x > 2

Step-by-step explanation:

9514 1404 393

Answer:

  -2

Step-by-step explanation:

The average rate of change on the interval [3, 9] is ...

  (f(9) -f(3))/(9 -3) = (41 -53)/(9 -3) = -12/6 = -2

Answer:

18,36,54,72,90 are first five multiples of 18

Step-by-step explanation:

Answer:

18,36,54,72,90

Step-by-step explanation:

A postulate is something that is assumed to be true and there isn't a proof for it as its something foundational to help set up further proofs later down the road. Another example of a postulate is that a line is defined by two distinct points.

Answer:

3x+7=22

Step-by-step explanation:

three times a number is

[tex]3\times x=3x[/tex]

so the sum of 3x and 7 is 22

[tex]3x+7=22\\\\3x=15\\\\x=5[/tex]

you can leave it here

[tex]3x+7=22[/tex]

if you need the value of x

then

[tex]x=5[/tex]