Answer:
The transformation went from a gas to a solid which is a Deposition
Explanation:
Deposition is the phase transition in which gas transforms into solid without passing through the liquid phase. Deposition is a thermodynamic process. The reverse of deposition is sublimation and hence sometimes deposition is called desublimation.
The change of state that occurred was that the object went from gas to solid in a process of Deposition.
The properties of gas and solid:
Particles in gas move very quickly which leads to them being spread apart Particles in solids are quite slow and so are close togetherBased on the properties of the object before and after the change, we can infer that the object went from gas directly to solid. This process is called a deposition.
In conclusion, a deposition occurred with gas changing directly to solid.
Find out more at https://brainly.com/question/24651908.
Jack bought 8 boxes of soda. how many cans did he buy if each box holds 34 cans?
Answer:
272
Explanation:
hope this helps you!!!
The equation Upper E equals StartFraction 1 Over 2 pi epsilon Subscript 0 EndFraction StartFraction q d Over z Superscript 3 EndFraction is approximation of the magnitude of the electric field of an electric dipole, at points along the dipole axis. Consider a point P on that axis at distance z = 23.00d from the dipole center (d is the separation distance between the particles of the dipole). Let Eappr be the magnitude of the field at point P as approximated by the equations below. Let Eact be the actual magnitude. What is the ratio Eappr /Eact?
Answer:
E_aprox = 1.003 E_real
Explanation:
In this exercise we are given the expression for the electric field of a dipole in the axis direction of the dipole
E_real = k 2q d / √(z² + d²)³
I think your equation has some errors.
In this case they indicate that d is the separation of the charges of the dipole
in the case of z »d this equations approximates
E_aprox = k 2q d/ z³
calculate the value for the two cases
E_real = k2q d / √[ ((23d)² + d²)³]
E_real = k2q d / d³ 12201
E_real = k2q 1/12201 d²
E_aprox = k2q d / (23.00d)³
E_aprox = k2q 1/12167 d²
the error between these quantities is
E_aprox / E_real = 12201 d² / 12167 d²
E_aprox / E_real = 1.003
E_aprox = 1.003 E_real
To understand the origin of the torque on a current loop due to the magnetic forces on the current-carrying wires.
This problem will show you how to calculate the torque on a magnetic dipole in a uniform magnetic field. We start with a rectangular current loop, the shape of which allows us to calculate the Lorentz forces explicitly. Then we generalize our result. Even if you already know the general formula to solve this problem, you might find it instructive to discover where it comes from.
a) Give a more general expression for the magnitude of the torque τ. Rewrite the answer found in Part A in terms of the magnitude of the magnetic dipole moment of the current loop m. Define the angle between the vector perpendicular to the plane of the coil and the magnetic field to be ϕ, noting that this angle is the complement of angle θ in Part A.
Give your answer in terms of the magnetic moment m, magnetic field B, and ϕ.
Answer:
The torque is [tex]\tau = B * m sin(\phi )[/tex]
Explanation:
Generally when current flow through a rectangular loop the magnetic dipole generated we can denote this as [tex]\vec m[/tex]
Here k is the length of the side of one side of the rectangular loop
Now when this loop is place in a magnetic field, the torque it experience is mathematically represented as
[tex]\vec \tau = \vec B \ X \ \vec m[/tex]
Here X stands for cross - product
From the question we are told that the angle between the vector ( [tex]\vec m[/tex])perpendicular to the plane of the coil and magnetic field(B) as [tex]\phi[/tex]
So
=> [tex]\tau = B * m sin(\phi )[/tex]
Arrange the following events in the mantle convection process. Use numbers 1-5.
a. Lithospheric plates move in the asthenosphere due to rising and sinking of
materials.
b. The decomposition of radioactive elements causes heat in the interior part of
the Earth
c. Heat slowly rises to the mantle and creates convection current.
d. Heat moves to the core.
e. The process repeats as cycle.
Answer:
1) Lithospheric plates move in the asthenosphere due to rising and sinking of materials is 1.
2) The decomposition of radioactive elements causes heat in the interior part of the Earth
3) Heat slowly rises to the mantle and creates convection current.
4). Heat moves to the core
5) The process repeats as cycle.
Explanation:
Mantle convection is the gradual slow creeping of movement of the Earth's mantle which is as a result of convection current which transfer heat from the interior to the surface of the Earth .
The process of mantle convection start with
1. Lithospheric plates move in the asthenosphere due to rising and sinking of materials is and thus form the two component of the mantle.
2) The decomposition of radioactive elements causes heat in the interior part of the Earth. This is as a result of accretion which is associated to sea flooding
3) Heat slowly rises to the mantle and creates convection current.
4). Heat moves to the core, cools down by conduction and convection of heat.
5) The process repeats as cycle.
The proper and correct arrangement of events in the mantle convection process are:
1. The decomposition of radioactive elements causes heat in the interior part of the Earth.
2. Heat moves to the core
3. Heat slowly rises to the mantle and creates convection current.
4. Lithospheric plates move in the asthenosphere due to rising and sinking of materials.
5. The process repeats as a cycle.
Convection is considered to be one of the most efficient ways through which heat is transported from the interior of planet Earth to the surface.
Mantle convection can be defined as the very slow transfer of heat due to the movement of Earth's solid silicate material within the mantle.
Basically, the slow creeping of the mantle causes a transfer of heat from the white-hot core to the brittle lithosphere during mantle convection.
Furthermore, the heating of the mantle takes place from below (the core) and it rises upward in hotter regions while it sinks down in colder regions.
The proper and correct arrangement of events in the mantle convection process are:
1. Heat is caused in the interior part of the Earth due to the decomposition or decay of radioactive elements.
2. Heat moves to the core.
3. Heat slowly rises from the Earth's core to the mantle and creates convection current in the asthenosphere, which is the plastic layer of the mantle.
4. Lithospheric plates move in the asthenosphere due to rising and sinking of materials.
5. The process is then repeated as a cycle.
Read more: https://brainly.com/question/19545005
Which mathematical statement shows the relationship between gravity and mass?
Answer
F (force of gravity) = M (mass of an object) × G (acceleration due to gravity)
Step-by-step explanation:
Force of gravity (F) = Mass (M) × Gravitational acceleration (G)
The weight of an abject is equal to its gravitational force!
Explanation:
Answer:
[tex]F_{g} = \frac{m}{d^{2} }[/tex] shows the relationship between gravity and mass.
Explanation:
According to the Newton's law of gravitation, the gravitational force between two bodies is,
[tex]F_{g} = G.\frac{m_{1}.m_{2} }{d^{2} }[/tex]
here [tex]m_{1} and m_{2}[/tex] are masses, d is distance between them.
What is Newton's law of Gravitation ?It states that gravitational force acting two bodies is directly proportional to the product of masses and inversely proportional to the square of the distance between them.
In above formula ,
If [tex]m_{1} = 1 and[/tex] [tex]m_{2} = m[/tex]
so [tex]F_{g} = G \frac{m}{d^{2} }[/tex]
Since G is constant ,
[tex]F_{g}[/tex] ∝[tex]\frac{m}{d^{2} }[/tex]
Hence second option is correctly showing relationship between gravity and mass.
https://brainly.com/question/22522227
#SPJ2
WILL MARK BRANLIEST PLZ HELP FAST
Answer The Questions Based on The Graph
1. Which limiting factor(s) in this lab simulation are biotic?
2. Which limiting factor(s) in this lab simulation are abiotic?
3. Which limiting factor impacted the cricket frog population the most? Use evidence to support your answer.
4. Which limiting factor impacted the cricket frog population the least? Use evidence to support your answer.
5. Mosquitoes can carry and transmit disease to animals and humans. Explain how the cricket frog plays an important role in limiting the spread of mosquito-borne illnesses like West Nile virus and malaria.
6. Predict the long-term effects of these limiting factors on the cricket frog population in the pond ecosystem.
Answer:
1. Which limiting factor(s) in this lab simulation are biotic?
The limiting factors in this lab that are biotic are predators and food.
2. Which limiting factor(s) in this lab simulation are abiotic?
The limiting factor in this lab that is abiotic is pollution.
3. Which limiting factor impacted the cricket frog population the most? Use evidence to support your answer.
The limiting factor that impacted the cricket frog population the most is the predators because the population went to 90K and then all the way down to 15K.
4. Which limiting factor impacted the cricket frog population the least? Use evidence to support your answer.
The limiting factor that impacted the cricket frog population the least is pollution because it stayed the same then went down to 35K.
5. Mosquitoes can carry and transmit disease to animals and humans. Explain how the cricket frog plays an important role in limiting the spread of mosquito-borne illnesses like West Nile virus and malaria.
The cricket frogs play an important role in limiting the spread of mosquito borne illnesses because they consume the mosquitos and decrease the population of contaminated mosquitos.
6. Predict the long-term effects of these limiting factors on the cricket frog population in the pond ecosystem.
Eventually the cricket frog population may die out because of all the negative factors. If there are too many mosquitoes, then the frog population can begin to die out. With pollution, the frogs do not have a safe and clean environment to leave in and can get infected, sick, and can die after a while. Crocodiles need to eat, so they are also bringing down the population.
An airplane flies with a constant speed
of 720 km/h. How far can it travel in
3 hours
Answer:
2160 km/h
Explanation:
720 times 3 gives you the answer
what is 1/2 / 1/4. Please help am getting two answers.idk the correct one.
Answer:
2
hope this helps :)
How fast would an inline skater have been traveling if he had covered 400 m in 10
seconds?
Answer:
The answer is 40 m/sExplanation:
The speed or velocity of an object given it's distance and time taken can be found by using the formula
[tex]v = \frac{d}{t} \\ [/tex]
From the question we have
[tex]v = \frac{400}{10} \\ [/tex]
We have the final answer as
40 m/sHope this helps you
a phosphorus atom needs to gain ---electrons to achieve a full octet
Answer:
Three (3).
Explanation:
The octet rule is a rule in chemistry that states that, chemical elements would either gain or loss electrons in their outermost shell in order to attain a stable electronic configuration i.e having eight (8) valence electrons in their outermost shell such as chemical elements found in group 8 (2-8-8) known as noble gas.
A phosphorus atom needs to gain three (3) electrons to achieve a full octet because the atomic number of phosphorus is 15 and as such it has the electronic configuration of 2-8-5 and needs three electron in order to become a stable element.
Stored energy is_____ Energy.
A) Nuclear
B) Potential
C) Kinetic
D) Light
Water being held back by a dam possesses which type of energy?
A) Kinetic energy
B)Potential Energy
C) Nuclear energy
D) Chemical energy
What is the momentum of a 200 kg football player running west at a speed of 8m/s
Answer:
The answer is 1600 kgm/sExplanation:
The momentum of an object can be found by using the formula
momentum = mass × velocityFrom the question
mass = 200 kg
velocity / speed = 8m/s
We have
momentum = 200 × 8
We have the final answer as
1600 kgm/sHope this helps you
What is the current in the 30.0 o resistor?
2.00A
32.0A
4.00A
30.0A
Answer:
4.00 A
Explanation:
A permanent magnet cannot be used in electrical bell .Why?
Answer:
we can not use permanent magnets in radio and electric bells , because permanent magnets loose their property after some time whereas we can change the properties of electromagnet.
How are representative democracies and direct democracies similar?
In both, elected officials meet to make laws.
The power lies with the people in both types of government.
Both types of government work well in countries with large populations.
In both, citizens often represent themselves in voting on government decisions.
BRAINLYIST IS THE REWARD
Answer:
The answer is Both types of government work well in countries with large populations.
Explanation:
Answer:
its d
Explanation:
A constant net force acts on an object. Describe the motion of the object
a) constant acceleration
B) constant speed
C) constant velocity
D) increasing acceleration
Answer:
C)constant velocity
Explanation:
it is probably corrected
A hiker walks 11 km due north from camp and then turns and walks 11 km due east. What is the total distance walked by the hiker?
Answer:
22 km
Explanation:
11km + 11km= 22km
Which value is NOT equivalent to the others?
Multiple choice question.
A)
5 × 1011 nm
B)
0.5 km
C)
500 m
D)
5000 cm
Answer:
A) 5 × 1011nm
I think It's A
What acceleration will all objects experience during their flights through the air (on Earth)?
Answer:
d
Explanation:
Answer:
9.8 m/s/s
Explanation:
As such, all objects free fall at the same rate regardless of their mass. Because the 9.8 N/kg gravitational field at Earth's surface causes a 9.8 m/s/s acceleration of any object placed there, we often call this ratio the acceleration of gravity
Out of these people who r ur favs?
WilburSoot
TommyInnit
Tubbo
Fundy
Sapnap
Dream
GeorgeNotFound
Quackity
Jschalt
Nikki
Ponk
Skeppy
BBH
Punz
aweSAMedude
HiBomb
TechnoBlade
Answer:
Is it a sin to like them all...? haha
Answer:
Schlatt, Nikki, Tubbo, and Wilbur :O
Explanation:
how is this a question lol-
Which two options would increase the electric force between two charged
particles?
O A. Increase the distance between the particles.
B. Increase the charge of one of the particles.
C. Decrease the charge of both particles.
O
D. Decrease the charge of one of the particles,
O E. Decrease the distance between the particles,
The two options would increase the electric force between two charged
particles is
E. decrease the distance between particles.
B. Increase the charge of one of the particles.
What is Electric force?The attractive or repulsive interaction that lies between any two charged objects should be called as the electric force.
When the distance between the particles is decreased and the charge of one particles should be increased so it increased the electric force.
hence, option b and option e are correct.
Learn more about electric force here: https://brainly.com/question/17562167
Two particles are separated by 0.38 m and have charges of -6.25 x 10-°C
and 2.91 x 10-°C. Use Coulomb's law to predict the force between the
particles if the distance is cut in half. The equation for Coulomb's law is
Fe = kqu92, and the constant, k, equals 9.00 x 109 Nm2/C2
A. 1.13 x 10-6N
B. 4.53 x 10-6N
C. -1.13 x 10-6N
D. -4.53 x 10-6N
Answer:
-4.53 X 10-6N
Explanation:
apex
An object accelerates from rest to a velocity of 34 m/s
over a distance of 70 m. What was its acceleration?
Answer:
6.8m/s²
Explanation:
Given parameters:
Initial velocity = 0m/s
Final velocity = 34m/s
Distance = 70m
Unknown:
To solve this problem we apply one of the motion equations;
V² = U² + 2aS
where V is the final velocity
U is the initial velocity
a is the acceleration
S is the distance covered
Input the parameters and solve;
34² = 0² + 2 x a x 70
34² = 140a
a = 6.8m/s²
Which of the following is a benefit of physical activity?
Answer:
B
Explanation:
better concentration
When the light turns green, Mark accelerates straight down the road at 1.8 m/s2 for 8 seconds. What is his final velocity at the end of those 8 seconds?
Answer:
14.4m/s
Explanation:
To calculate the final velocity (V), we use the formula:
v = u + at
Where; v = final velocity (m/s)
u = initial velocity (m/s)
a = acceleration (m/s²)
t = time (s)
According to the provided information in this question, v = ?, u = 0m/s, a = 1.8m/s², t = 8s
Hence, v = u + at
v = 0 + (1.8 × 8)
v = 0 + 14.4
v = 14.4m/s
Therefore, his final velocity at the end of those 8 seconds is 14.4m/s.
I don’t know why I am feeling worse day by day!
Answer:
Why ?? What happened ??
If a football player has a weight of 600 N on earth, what would his weight be on the moon?
Answer:
99n
Explanation:
What is special about decomposers? *
a. they are autotrophs that absorb nutrients that have been digested outside their bodies.
b. they are heterotrophs that absorb nutrients that have been digested outside their bodies.
c. they are autotrophs that digest food internally (inside their bodies)
d. they are heterotrophs that digest food internally (inside their bodies)
Does horizontal motion have any formula?
What are three types of electromagnetic waves that can be used to take
photographs??
Answer:
x-rays, Infrared rays, microwaves.