A silver cube with an edge length of 2.42 cm and a gold cube with an edge length of 2.75 cm are both heated to 85.4 ∘C and placed in 112.0 mL of water at 20.5 ∘C . What is the final temperature of the water when thermal equilibrium is reached?

Answer:

C. A positive and a negative ion

Explanation:

Acids and bases are made up of charged particles known as ions. The ions present in acids are oppositely charged and are held together by strong electrostatic forces. When acids or bases are dissolved in water, the electrostatic forces holding their individual molecules together are weakened and these ions are free to move apart in a process known as dissociation. Dissociation occurs because of the attraction between the positive and negative ions in the acid and bases and the negative and positive polarity of water.

For example, when an acid like hydrochloric acid is dissolved in water it dissociates into positive and negative ions as follows:

HCl(aq) -----> H+ + Cl-

When a base like sodium hydroxide is dissolved in water, it dissociates into positive and negative ions as follows:

NaOH(aq) ----> Na+ + OH-

Answer:

yeah C is correct

Explanation:

Answer:

[tex]0.48~\frac{J}{g~^{\circ}C}[/tex]

Explanation:

In this question, we have to remember the relationship between Q (heat) and the specific heat (Cp) the change in temperature (ΔT), and the mass (m).

[tex]Q=m*Cp*ΔT[/tex]

The next step is to identify what values we have:

[tex]Q~=~1870~J[/tex]

[tex]m~=~85.01~g[/tex]

[tex]ΔT~=~45.2~^{\circ}C[/tex]

[tex]Cp~=~X[/tex]

Now, we can plug the values and solve for "Cp":

[tex]1870~J=~85.01~g~*Cp*45.2~^{\circ}C[/tex]

[tex]Cp=\frac{1870~J}{85.01~g~*45.2~^{\circ}C}[/tex]

[tex]Cp=0.48~\frac{J}{g~^{\circ}C}[/tex]

The unknow metal it has a specific value of [tex]0.48~\frac{J}{g~^{\circ}C}[/tex]

I hope it helps!

Answer:

pH ≅ 4.80

Explanation:

Given that:

the volume of HN₃ = 25 mL = 0.025 L

Molarity of HN₃ = 0.150 M

number of moles of HN₃ = 0.025 × 0.150

number of moles of HN₃ =  0.00375  mol

Molarity of NaOH = 0.150 M

the volume of NaOH = 13.3 mL = 0.0133

number of moles of NaOH = 0.0133× 0.150

number of moles of NaOH = 0.001995 mol

The chemical equation for the reaction of this process can be written as:

[tex]HN_3 + OH- ---> N^-_{3} + H_2O[/tex]

1 mole of hydrazoic acid react with 1 mole of hydroxide to give nitride ion and water

thus the new number of moles of HN₃ = 0.00375 - 0.001995 = 0.001755 mol

Total volume used in the reaction =  0.025 +  0.0133 = 0.0383  L

Concentration of [tex]HN_3[/tex] = [tex]\dfrac{0.001755}{0.0383}[/tex] = 0.0458 M

Concentration of [tex]N^{-}_3[/tex] = [tex]\dfrac{ 0.001995 }{0.0383}[/tex] = 0.0521 M

GIven that :

Ka = [tex]1.9 x 10^{-5}[/tex]

Thus; it's pKa = 4.72

[tex]pH =4.72 + log(\dfrac{ \ 0.0521}{0.0458})[/tex]

[tex]pH =4.72 + log(1.1376)[/tex]

[tex]pH =4.72 + 0.05598[/tex]

[tex]pH =4.77598[/tex]

pH ≅ 4.80

The pH of the solution 0.150 M hydrazoic acid after 13.3 mL of NaOH base is added is 4.80.

pH of the given solution will be used by using the following equation:

pH = pKa + log[conjugate base] / [weak acid]

Given chemical reaction will be represented as:

HN₃ + OH⁻ → N₃⁻ + H₂O

Moles will be calculated as:

n = M×V, where

M = molarity

V = volume

Moles of 0.150 M hydrazoic acid = (0.150M)(0.025L) = 0.00375  mol

Moles of 0.150 M NaOH = (0.0133)(0.150) = 0.001995 mol

From the above calculation it is clear that moles of hydrazoic acid is present in excess and it will be:

0.00375 - 0.001995 = 0.001755 mol

And 0.001995 mol of N₃⁻ is preduced by the reaction.

Total volume of the solution = 0.025 +  0.0133 = 0.0383  L

To calculate the pH after titration, first we have to calculate the concentration in terms of molarity of N₃⁻ and HN₃ as:

[N₃⁻] = 0.001995 mol / 0.0383  L = 0.0521 M

[HN₃] = 0.001755 mol / 0.0383  L = 0.0458 M

Ka for HN₃ = 1.9 × 10⁻⁵

pKa = -log( 1.9 × 10⁻⁵ ) = 4.72

On putting all these values on the above equation, we get

pH = 4.72 + log (0.0521) / (0.0458)

pH = 4.80

Hence, pH of the solution is 4.80.

To know more about pH, visit the below link:
https://brainly.com/question/10313314

Answer:

please look at the picture below.

Explanation:

Answer:

A.Electrolysis

Explanation:

A.Electrolysis

For example,  electrolysis of solution of NaCl in water gives H2 and O2.

Answer:

[tex]1) NH_{4}IO_{3}\\2) Pb(IO_{3})_{4} \\3) NH_{4}(C_{2}H_{3}O_{2})\\4) Pb(C_{2}H_{3}O_{2})_{4}[/tex]

Explanation:

[tex]1) NH_{4}^{+}IO_{3}^{-} ---> NH_{4}IO_{3}\\2) Pb^{4+}(IO_{3}^{-})_{4} --->Pb(IO_{3})_{4} \\3) NH_{4}^{+}(C_{2}H_{3}O_{2})^{-} ---> NH_{4}(C_{2}H_{3}O_{2})\\4) Pb^{4+}(C_{2}H_{3}O_{2})^{-} _{4} --->Pb(C_{2}H_{3}O_{2})_{4}[/tex]

Answer:

158.7 g

Its the right answer

Answer:

The incorrect statement from the options is OXIDATION IS A "GAIN" OF ELECTRONS

Explanation:

Oxidation in a redox reaction is the loss of electrons. It is also the increase in the oxidation states of an atom or ion or atoms in a molecule. A redox reaction is a type of chemical reaction in which there is a transfer of electrons from an atom or ion to another resulting in a change in oxidation states of the substances involved. The reducing agent in the reaction is undergoes oxidation by losing electrons while the oxidating agent is reduced that is it gains electrons at the end of the reaction. The atom or ion from which electron is lost is said to be oxidized while the other atom or ion involved in the reaction is reduced.

Oxidation is also the combination with O atoms and it is always accompanied by reduction because oxidation forms a half of the whole redox reaction. A substance cannot be oxidized except it has reduced another substance by losing electrons to it.

Answer:

THE EMPIRICAL FORMULA FOR THE UNKNOWN COMPOUND IS C7H9O

Explanation:

The empirical formula for the unknown compound can be obtained by following the processes below:

1 . Write out the percentage composition of the individual elements in the compound

C = 75.68 %

H = 8.80 %

O = 15.52 %

2. Divide the percentage composition by the atomic masses of the elements

C = 75 .68 / 12 = 6.3066

H = 8.80 / 1 = 8.8000

O = 15.52 / 16 = 0.9700

3. Divide the individual results by the lowest values

C = 6.3066 / 0.9700 = 6.5016

H = 8.8000 / 0.9700 = 9.0722

O = 0.9700 / 0.9700 = 1

4. Round up the values to the whole number

C = 7

H = 9

O = 1

5 Write out the empirical formula for the compound

C7H90

In conclusion, the empirical formula for the unknown compound is therefore C7H9O

Combining quantum theory with wave motion of atomic particles is: Wave Mechanics

five oxygen molecules

step by step explanation.

according to the equation,one molecule of oxygen is enough to react with two carbon molecules thus 10 carbon molecules need 5oxygen molecules

Answer:

Francium

Explanation:

The atomic radius increases from top to bottom in a group, and decreases from left to right across a period.

so francium (Fr) is the largest atom or has highest radii.

Hope this helps & please mark as brainiest!

Answer:

Francium has the largest atomic radius.

The general trend for atomic radii is increasing from top to bottom and decreasing from left to right so the one with the largest atomic radius will be in the bottom left of the periodic table.

Answer:

33.3% of Sn in the sample

Explanation:

The addition of SO₄⁻ ions produce the selective precipitation of Pb²⁺ to produce PbSO₄.

Moles of PbSO₄ (molar mass 303.26g/mol) in 2.93g are:

2.93g ₓ (1mol / 303.26) = 9.66x10⁻³ moles PbSO₄ = Moles Pb²⁺.

As molar mass of Pb is 207.2g/mol, mass in 9.66x10⁻³ moles of Pb²⁺ is:

9.66x10⁻³ moles of Pb²⁺ ₓ (207.2g / mol) = 2.00g of Pb²⁺

As mass of the sample is 3.00g, mass of Sn²⁺ is 3.00g - 2.00g = 1.00g

And the percentage of Sn in the sample is:

1.00g / 3.00g ₓ 100 =

Answer:

NaClO + CH₃COOH ----> HClO + CH3CO- + Na

Explanation:

This reaction occurs between the combination of a salt and an acid, that is, an oxide-reduction reaction

Answer:

See explanation

Explanation:

For the first part of the question, we have to check the chiral carbons in 4-methyl-1,2-cyclohexanediol. In this case carbons, 1 and 2 are chiral, if we have 2 chiral carbons we will have 4 isomers. We have to remember that formula 2^n in which "n" is the number of chiral carbons, so:

2^n = 2^2 = 4 isomers

And the isomers that we can have are:

1) (1R,2S)-4-methylcyclohexane-1,2-diol

2) (1S,2S)-4-methylcyclohexane-1,2-diol

3) (1S,2S)-4-methylcyclohexane-1,2-diol

4) (1S,2R)-4-methylcyclohexane-1,2-diol

See figure 1

For the second part of the question, we have to remember that the oxidation with [tex]OsO_4[/tex] is a syn addition. In other words, the "OHs" are added in the same plane. In this case, we have the methyl group with a wedge bond, so the "OH" groups will have a dashed bond due to the steric hindrance. Due to this we only can have 1 isomer ((1S,2R,4S)-4-methylcyclohexane-1,2-diol). Finally, on this molecule, we dont have any symmetry planes (this characteristic will cancel out the optical activity), so the product of this reaction has optical activity.

See figure 2

I hope it helps!

Answer:a

Explanation:

The three characteristics of minerals are that they are solid, have definite crystal structure and definite chemical composition.

Minerals are defined as a chemical compound  which has a well -defined composition and possesses a specific crystal structure.It occurs naturally in the pure form.

If a compound occurs naturally in different crystal structure then each structure is considered as a different mineral.The chemical composition of a mineral varies  depending on the presence of small impurities which are present in small quantities.

Some minerals  can have variable proportions of two or more chemical elements  which occupy equivalent position in the crystal structure.It may also have variable composition which is split into separate species.

Physical properties of minerals include color,streak, luster,specific gravity  and cleavage.

Learn more about minerals ,here:

https://brainly.com/question/1333886

#SPJ6

Answer:

The lewis structure of the compounds can be drawn by making the skeleton of the molecule first. Then the different atoms are arranged and the electrons are arranged in their bonding pattern. The lone pair of the atoms, which are not involved in the bonding are represented by the dots.

So the lewis structures of both the compound methyl mercaptan has been in the attached image:

Spelling of methyl metcaptain is wrong, the correct spelling is methyl mercaptan.

Answer:

Methyl mercaptan is also known as Methanethiol with the chemical formula  CH3SH and it is an organosulfur compound.

For lewis structure of methyl mercaptan (CH3SH), there are total 14 valence electrons. Four hydrogen atoms has one valence electron each, carbon has four valence electrons and sulfur has six valence electrons. Carbon form one bond with three hydrogen atoms by sharing one electron with each, carbon form one single bond with sulfur atom by sharing one electron with it and sulfur form one single bond with hydrogen. Sulfur left with four unpair electrons.

Answer:

[tex]Pb(CO_{3})_{2} \\Pb(NO_{3})_{4} \\FeCO_{3}\\Fe(NO_{3})_{2}[/tex]

Explanation:

[tex]Pb^{4+}(CO_{3}^{2-})_{2} --->Pb(CO_{3})_{2} \\Pb^{4+} (NO_{3}^{-})_{4} --->Pb(NO_{3})_{4} \\Fe^{2+} CO_{3}^{2-} --->FeCO_{3}\\Fe^{2+} (NO_{3}^{-})_{2}--->Fe(NO_{3})_{2}[/tex]

The answer is Hydrogyn bonding. It keeps the water molocules bonded together and in a liquid state, without it it'd be in a gashious state.

Answer:Hydrogen bonds keep them together in room temperature, hope this helps!

Explanation:

<!> Brainliest is appreciated! <!>

Answer:

d) El agua pesada contiene mas elementos

Explanation:

La diferencia fundamental entre el agua pesada y el agua ligera es que la primera tiene una proporción mayor de deuterio que la segunda. El deuterio es un ión del hidrógeno que tiene un peso atómico mayor que el hidrógeno común y corriente. Por ende, la opción D ofrece la mejor aproximación.

Answer:

....................

lllllllllllllllll

Explanation:ki

Answer: The molarity of solution is 0.221 M

Explanation:

Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.

[tex]Molarity=\frac{n}{V_s}[/tex]

where,

n = moles of solute

[tex]V_s[/tex] = volume of solution in L

moles of [tex]NaI[/tex] = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{49.8g}{149.89g/mol}=0.332mol[/tex]

Now put all the given values in the formula of molality, we get

[tex]Molarity=\frac{0.332mol}{1.50L}[/tex]

[tex]Molarity=0.221mol/L[/tex]

Therefore, the molarity of solution is 0.221 M