A sample of an unknown volatile liquid was injected into a Dumas flask and heated until no visible traces of the liquid could be found. The flask and its contents were then rapidly cooled and reweighed The atmospheric pressure and temperature during the experiment were 0.976 atm and 18.0 °C, respectively. The unknown volatile liquid was ________

Answer:

4.16M/s

Explanation:

Based on the reaction:

CH₄ + N₂Cl₄ ⇄ CCl₄ + N₂ + 2H₂

1 mole of methane, CH₄, produce 2 moles of H₂.

That means whereas 1 mole of methane is consumed, 2 moles of H₂ are formed

Having this in mind, if you are consuming methane at a rate of 2.08M/s, the rate of formation of hydrogen must be twice this rate, because there are produced twice moles of H₂.

Thus, rate of formation of H₂ is:

2.08M/s ₓ 2 =

4.16M/s

The rate of formation of H2 is 4.16M/s

Based on the reaction:

CH₄ + N₂Cl₄ ⇄ CCl₄ + N₂ + 2H₂

here

1 mole of methane, CH₄, produce 2 moles of H₂.

In the case when you are consuming methane at a rate of 2.08M/s, the rate of formation of hydrogen must be twice this rate, because there are produced twice moles of H₂.

Thus, rate of formation of H₂ is:

2.08M/s ( 2) = 4.16M/s

Learn more: https://brainly.com/question/26115859?referrer=searchResults

Answer:

351.1g/mol

Explanation:

you can find the answer using The ideal gas equation

n= PV/RT

n=(1.21*1.9/0.082*301)mol

n=0.092 mol

molar mass=Mass/mole

m=32.3g/0.092mol

m=351.1g/mol

Answer:

W= -11KJ

Explanation:

Given:

volume expands from 28 L to 51 L

pressure =4.9 atm.

We will need to Convert the pressure to Pascal SI

But 1 atm = 101,325 Pa.

Then,

Pressure= (4.9*101323)/1atm = 5*10^5 pa

Then we need to Convert the volumes to cubic meters

But we know that1 m³ = 1,000 L.

V1= 28L * 1m^3/1000L = 0.028m^3

V2=51L × 1m^3 /1000L =0.051m^3

The work done during the expansion of a gas can be calculated as

W= -P(V2-V1)

W= - 5*10^5(0.051m^3 - 0.028m^3)

W= -1.1× 10^4J

Then we can Convert the work to kiloJoule

But1 kJ = 1,000 J.

W= -1.1× 10^4J× 1kj/1000J

= -11KJ

Answer:

The unknown compound is a weak acid.

Explanation:

Given that :

a 25 mL sample of a solution of an unknown compound is titrated with a 0.115 M NaOH solution.

A buffer region was found around a pH of 3.5. We know that a pH of 3.5 is a weak acid. So, it is likely to be an organic acid

Let assume the solution of the unknown sample to be CH₃COOH

Now :

25 mL of CH₃COOH reacted with 0.115 M of NaOH

The equation for the reaction will be :

CH₃COOH    +    NaOH -----> CH₃COONa + H₂O

at x mole of      0.115y M of

CH₃COOH       NaOH is present

If NaOH was added in excess;

CH₃COOH    +    NaOH -----> CH₃COONa , NaOH will be lost then CH₃COOH    and CH₃COONa will be present

Therefore;

At equilibrium : Only CH₃COONa will be present but if it is above equilibrium NaOH will be present   because the pH will increase due to the presence of the strong base

Answer:

114 grams

Explanation:

3chlorines per compound*38grams=114

Answer:

0.774g of ethanol

0.970mL of ethanol

Explanation:

Molality is an unit of concentration defined as the ratio between moles of solute and kg of solvent.

In the problem, you need to prepare a 1.2m solution of ethanol (Solute) in t-butanol (solvent).

14.0g of butanol are 0.014kg and as you want to prepare the 1.2m solution, you need to add:

0.014kg × (1.2moles / kg) = 0.0168 moles of solute = Moles of ethanol

To convert moles of ethanol to mass you require molar mass (Molar mass ethanol, C₂H₅OH = 46.07g/mol). Thus, mass of 0.0168 moles are:

0.0168moles Ethanol ₓ (46.07g / mol) =

And to convert mass in g to mL you require density of the substance (Density of ethanol = 0.798g/mL):

0.774g ₓ (1mL / 0.798g) =

Answer:

A single displacement reaction.

Explanation:

Acid + Metal => Salt + Hydrogen

Since, Acids usually have an H+ ion so the Anion part of the acid combines with the Metal (Which is also a cation). So, Anion part of acid is singly displaced by the Metal.

Answer:

THE AMOUNT OF HEAT REQUIRED TO CONVERT ICE FROM -20 C TO STEAM AT 120 C IS 30 946 J OR 30.946 KJ OF HEAT.

Explanation:

Mass = 10 g

To convert 10 g of ice at -20°C to steam at 120°C, the heat involved is:

1. Heat involved in converting the ice from -20 °c to ice at 0 °C:

Heat = mass * specific heat of water solid * change in temperature

heat = 10g * 2.09 J/g°C * ( 0- (-20))

Heat = 10 * 2.09 * 20

heat = 418 J

2. Heat required to convert the ice from 0°C to water at 0°C:

Heat = mass * specific heat of fusion of water solid

Heat = 10 * 333

Heat = 3330 J

3. Heat required to convert water at 0 C to water at 100 C:

Heat = mass * specific heat of water * change in teperature

Heat = 10 * 4.18 * (100 -0)

Heat = 4180 J

4. Heat required to convert water at 100 C to steam at 100 C:

Heat = mass * specific heat of vaporization

Heat = 10 * 2260

Heat = 22600 J

5. Heat required to convert steam from 100 C to steam at 120 C:

Heat = mass * specific heat of water * change in temperature

Heat = 10 * 2.09 * (120 -100)

Heat = 10 * 2.09 * 20

Heat = 418 J

T

he heat required to convert 10 g of ice at -20 C to steam at 120 C is therefore the total of the individual heat of reactions

Total amount of heat = ( 418 J + 3330 J + 4180 J + 22600 J + 418 J)

Total heat =  30946 J

Answer:

The substance with the highest heat gives heat to the lowest temperature, equating both temperatures,

In this situation there is talk of giving up heat but not matter, it is here that the law of conservation of energy comes into play.

Explanation:

The law of conservation of energy talks about that energy is transformed and never lost between two substances or two bodies that interact with each other, these interactions can be heat exchanges, as in this example.

Answer:

Partial pressure of hydrogen H₂ = 0.32 atm

Explanation:

Given:

Total pressure = 0.48 atm

Find:

Partial pressure of hydrogen

Computation:

Number of mole of H₂ = 1 / 2 = 0.5 moles

Number of mole of He  = 1 / 4 = 0.25 moles

Total moles = 0.5 + 0.25 = 0.75

Partial pressure of hydrogen H₂ = [moles / total moles] Total pressure

Partial pressure of hydrogen H₂ = [0.50 / 0.75]0.48 atm

Partial pressure of hydrogen H₂ = 0.32 atm

Answer: 0.32 atm

Explanation:

First convert the mass of H2 to moles using the molar mass.

(1.0 gram H2 ⋅ (1.0 mol H2 / 2.016 g H2)) ≈ 0.50 mol H2

Next, convert the mass of helium He to moles using the atomic mass.

(1.0 gram He ⋅ (1.0 mol He / 4.003 g He)) ≈ 0.25mol He

The total number of moles is about 0.75 moles . The partial pressure of a component of a gas mixture can be found by multiplying the mole fraction by the total pressure.

PH2 = XH2 × Ptotal

PH2 = (0.50 mol / 0.75 mol)(0.48 atm) = 0.32 atm

Answer:

[tex]m_{CO_2}=46.6gCO_2[/tex]

Explanation:

Hello,

In this case, considering the combustion of propane:

[tex]C_3H_8(g)+5O_2(g)\rightarrow 3CO_2(g)+4H_2O(g)\ \ \ \Delta _CH=-2220.0 kJ/mol[/tex]

We can compute the burnt moles of propane as shown below:

[tex]n=\frac{-784kJ}{-2220.0 kJ/mol} =0.353molC_3H_8[/tex]

Then, by noticing propane and carbon dioxide are in a 1:3 molar ratio, we can compute the grams carbon dioxide by using the shown below stoichiometric procedure:

[tex]m_{CO_2}=0.353molC_3H_8*\frac{3molCO_2}{1molC_3H_8} *\frac{44gCO_2}{1molCO_2} \\\\m_{CO_2}=46.6gCO_2[/tex]

Best regards.

Answer:

second carbon atom from the  end

end carbon atom

Explanation:

Carbohydrates are naturally occurring organic compounds containing carbon, hydrogen and oxygen. The general molecular formula of Carbohydrates is [tex]C_x(H_2O)_y[/tex].

Carbohydrates can be classified based on structures,

Carbohydrates with the structure of alkanals (-CHO) are known as aldose while those of the structure of alkanones (C=O) are known as ketose.

In stereochemistry , D series is a kind of configurational arrangement where the hydroxyl group attaches itself to the right hand side.

Thus; in naturally occurring D series of ketoses, the carbonyl group is found on carbon number second carbon atom from the  end whereas in aldoses, the carbonyl group is found on carbon number end carbon atom.

Answer: 0.150 m [tex]Na_2SO_4(aq)[/tex] will have highest boiling point.

Explanation:

Formula used for Elevation in boiling point :

[tex]\Delta T_b=i\times k_b\times m[/tex]

where

[tex]\Delta T_b=T_b-T^o_b[/tex]= elevation in boiling point

[tex[k_b[/tex]  = boiling point constant  

m = molality

i = Van't Hoff factor

A) 0.100 m [tex]NiBr_2[/tex]

i = 3 as [tex]NiBr_2\rightarrrow Ni^{2+}+2Br^-[/tex]

concentration will be [tex]3\times 0.100=0.300[/tex]

B) 0.250 m [tex]CH_3OH[/tex]

i = 1 as [tex]CH_3OH[/tex] is a non electrolyte

concentration will be [tex]1\times 0.250=0.250[/tex]

C) 0.100 molal [tex]MgSO_4(aq)[/tex]

i = 2 as [tex]MgSO_4\rightarrrow Mg^{2+}+SO_4^{2-}[/tex]

concentration will be [tex]2\times 0.100=0.200[/tex]

D. 0.150 molal [tex]Na_2SO_4(aq)[/tex]

i = 3 as [tex]Na_2SO_4\rightarrrow 2Na^{+}+SO_4^{2-}[/tex]

concentration will be [tex]3\times 0.150=0.450[/tex]

E. 0.150 molal [tex]NH_4NO_3(aq)[/tex]

i = 2 as [tex]NH_4NO_3\rightarrrow NH_4^{+}+NO_3^{-}[/tex]

concentration will be [tex]2\times 0.150=0.300[/tex]

The solution having the highest concentration of ions will have the highest boiling point and thus 0.150 m [tex]Na_2SO_4(aq)[/tex] will have highest boiling point.

The aqueous solution that would have the highest temperature at boiling point would be:

D). 0.150 molal Na2SO4(aq)

The boiling point is described as the temperature at which the solution starts boiling or the vapor pressure becomes equivalent to the provided external/outer pressure.

To determine the elevation in boiling point, we will use:

Δ[tex]T_{b}[/tex] [tex]= i[/tex] × [tex]k_{b}[/tex] × [tex]m[/tex]

with

[tex]T_{b}[/tex] [tex]= T_{b} - T^{0}_{b}[/tex]

[tex]k_b[/tex] [tex]=[/tex] constant of boiling point

Using this formula,

0.150 molal Na2SO4(aq)

Given,

[tex]i = 3[/tex]

[tex]Na2So4[/tex] will have

[tex]2Na^{+}[/tex] [tex]+[/tex] [tex]SO^{2-}_{4}[/tex]

So,

Concentration [tex]= 3[/tex] × [tex]0.15[/tex][tex]0[/tex]

[tex]= 0.45[/tex][tex]0[/tex]

∵ 0.150 molal [tex]Na2SO4[/tex]Na2SO4(aq) has the maximum concentration.

Thus, option D is the correct answer.

Learn more about "Aqueous solution" here:

brainly.com/question/14097392

Answer:

0.96 mol CO

Explanation:

We simply just use the reaction to help us find this:

[tex]1.2 mol C(\frac{4 mol CO}{5 mol C} )[/tex]

Multiply it out and we get 0.96 as our answer.

Answer:

The correct answer is - 0.570 grams

Explanation:

The balanced chemical reaction is given by

Cu(NO3)2(aq)     + 2NaOH(aq)    -------->    Cu(OH)2(s)      + 2NaNO3(aq)

        1.0 mole            2.0 mole                 1.0 mole          2.0 mole

number of mol of Cu(OH)2,

n = Molarity * Volume

= [tex]35.0*0.167 = 5.845[/tex] millimoles

As clear in the equation, 1 mole of Cu(NO3)2 gives 1 mole of Cu(OH)2 , So, 5.845 millimoles of Cu(NO3)2 will produce 5.845 millimoles of Cu(OH)2

Mass of Cu(OH)2 = number of mol * molar mass

= [tex]97.5*5.845*10^-3[/tex]

= 0.570 grams

Thus, the correct answer is - 0.570 grams

Answer:

2OH^-(aq) + Cu^2+(aq) -----> Cu(OH)2(s)

Explanation:

The net ionic equation usually shows the main ionic reaction that goes in the system. The other ions that do not participate in this net ionic equation are called spectator ions. Spectator ions do not participate in the main reaction occurring in the system.

The net ionic equation quite often result in the formation of a solid precipitate in the system such as Cu(OH)2.

The net ionic equation for this reaction is;

2OH^-(aq) + Cu^2+(aq) -----> Cu(OH)2(s)

Answer:

3.01 × 10²³ molecules

Explanation:

Step 1: Given data

Moles of water (n): 0.500 mol

Step 2: Calculate the molecules of water present in 0.500 moles of water

In order to perform this calculation, we will use the Avogadro's number: in 1 mole of water there are 6.02 × 10²³ molecules of water.

0.500 mol × (6.02 × 10²³ molecules/1 mol) = 3.01 × 10²³ molecules

Answer:

It may be a hemorrhagic stroke because of the patient's history.

Explanation:

Uncontrolled hypertension could generate a hemorrhagic stroke within the brain generating the sign of progressive dementia, this is due to the vessel breaking due to the excess pressure of the internal light, it breaks and releases or extravases all the bloody contents to the brain

The difficulty of this is that the brain is the one that yields to a force in relation to the skull, that is why it is compressible against hemorrhage generating these signs as progressive dementia and could even be death or vegetative state

Answer:

D) [PCl5]=0.00765M,[PCl3]=0.117M,and [Cl2]=0.0.117M

Explanation:

Based on the reaction:

PCl₅(g) ⇄ PCl₃(g) + Cl₂(g)

And knowing:

Kc = [PCl₃] [Cl₂] / [PCl₅] = 1.80

When you add PCl₅ into a flask, this gas will react producing PCl₃ and Cl₂ until [PCl₃] [Cl₂] / [PCl₅] = 1.80

This could be written as:

[PCl₃] = X

[Cl₂] = X

[PCl₅] = 0.125M - X

Where X represents the moles of PCl₅ that react, reaction coordinate.

Replacing in Kc expression:

[PCl₃] [Cl₂] / [PCl₅] = 1.80

[X [X] / [0.125 - X] = 1.80

X² = 0.225 - 1.80X

0 = -X² -1.80X + 0.225

Solving for X:

X = -1.9M → False solution, there is no negative concentrations

X = 0.11735M → Right solution.

Replacing, concentrations in equilibrium are:

[PCl₃] = X

[Cl₂] = X

[PCl₅] = 0.125M - X

[PCl₃] = 0.117M

[Cl₂] = 0.117M

[PCl₅] = 0.00765M

And right option is:

Answer:

1 = 3.75L

2 = 26.91L

3 = 18.37L

Explanation:

Hello,

The question above can be solved when we know Avogadro's law which states that the volume of a fixed mass of gas is directly proportional the number of moles present provided temperature and pressure are kept constant.

Mathematically,

N = kV k = n/v

N1/V1 = N2/V2 = N3/V3 =......=Nn/Vn

N1 = 1.20 moles

V1 = 7.50L

1) if half of the Ne atoms escaped what would be the final volume.

1 mole of Ne = 6.022×10²³ atoms

½(1.20) moles of Ne = ?

0.6 moles of Ne = ?

1 mole = 6.022×10²³ atom

1.2 moles = ?

x = 1.2 × 6.022×10²³ atoms

x = 7.23×10²³atoms

If ½ of 7.23×10²³ atoms escaped, how many would be left

½ × 7.23×10²³ atoms = 3.61×10²³atoms

Now we have to find the number of moles and then use our equation.

1 mole = 6.022×10²³ atoms

y mole = 3.61×10²³ atom

y = 0.6 mole

N2 = 0.6 mole

N1 / V1 = N2 / V2

Make V2 the subject of formula,

V2 = (N2 × V1) / N1

V2 = (0.6 × 7.50) / 1.20

V2 = 3.75L

The volume after half of the Ne atoms escaped is 3.75L

2)

When a sample of 3.10 mole is added to 1.20 moles present

N1 = 1.20

V1 = 7.51

N2 = (1.20 + 3.10) = 4.30L

V2 = ?

N1 / V1 = N2 / V2

V2 = (N2 × V1) / N1

V2 = (4.30 × 7.51) / 1.20

V2 = 26.91L

The volume of Ne gas if 3.10 moles is added to it is 26.91L

3)

A sample of 35g is added to the 1.20 mole Ne in the container.

We need to convert the mass (35g) to moles. This can be done using mass-molarmass relationships

Number of moles = mass / molar mass

Molar mass of Ne = 20.17g/mol

Number of moles = 35 / 20.17

Number of moles = 1.735 moles

N2 = 1.20 moles + 1.735 moles

N2 = 2.935 moles

N1 / V1 = N2 / V2

V2 = (N2 × V1) / N1

V2 = (2.935 × 7.51) / 1.20

V2 = 18.37L

On addition of 35g of Ne gas to the container, the volume is increased to 18.37L

Answer:

See explanation

Explanation:

When we have to write an organic molecule, we have to remember the IUPAC rules. In this case, we have: "2,5-dimethylfuran". We can divide the name into two parts:

a) "2,5-dimethyl"

b) "Furan"

For part a) we have the indications of the "subgroups" bonded to the main structure, in this case, we have 2 methyl groups ([tex]CH_3[/tex]) bonded to carbons 2 and 5.

For part b) we have the main, structure. In this case furan, this compound is a cyclic structure of 5 members in which we have in the middle of the molecule an oxygen atom and  2 double bonds (see figure 1).

Finally, when we add the methyl groups to the furan we will get the 2,5-dimethylfuran. (see figure 2).

I hope it helps!

Answer:

In the above reaction, sulfur dioxide and oxygen react together to form sulfur trioxide. This means that an increase in pressure would move the equilibrium to the right and result in more sulfur trioxide being formed. Pressure can only affect the position of equilibrium if there is a change in the total gas volume.

Answer:

CH4

Explanation:

In solving this problem, we must remember that one mole of a compound contains Avogadro's number of elementary entities. These elementary entities include atoms, molecules, ions etc. Recall that one mole of a substance is the amount of substance that contains the same number of elementary entities as 12g of carbon-12. The Avogadro's number is 6.02 × 10^23.

Hence we can now say;

If 163 g of the compound contains 6.13 ×10^24 molecules

x g will contain 6.02 × 10^23 molecules

x= 163 × 6.02 × 10^23 / 6.13 × 10^24

x= 981.26 × 10^23/ 6.13 ×10^24

x= 160.1 × 10^-1 g

x= 16.01 g

x= 16 g(approximately)

16 g is the molecular mass of methane hence x must be methane (CH4)

Answer:

THE HEAT CAPACITY OF THE CALORIMETER IS 3666.67 J/C

Explanation:

Mass = 2 g

Temperature difference = 32 C - 29 C = 3 C

Heat of combustion = 11 kJ/g

Heat capacity of the calorimeter = unknown

It is important to note that the heat of combustion of the reaction is the heat absorbed by the calorimeter in raising the mixture by 3 C

So therefore,

Heat = heat capacity * temperature difference

Heat capacity = Heat / temperature difference

Heat capacoty = 11 000 J / 3 C

Heat capacity = 3666.67 J/ C

Answer:

A)566×10^-16J

B)711.99×10^-16J

C)688.69×10^-12J

Explanation:

A)

But we know that

1 nm = 10^-9 m

Then we can Convert from nanometer to metre which is SI unit

632.8 nm = 632.8×10^-9 m = 6.328×10^-7 m

The speed of light is c = 2.998×10^8 m/s

λ = 6.328×10^-7 m

But the frequency can be calculated as;

ƒ = c / λ

ƒ = (2.998×10^8 m/s) / (6.328×10^-7 m)

Then

ƒ = 4.738×10^14 s-1

To calculate Energy we use

Energy= hf

Where h is plank constant= 6.626× 10^-34

Energy= 6.626× 10^-34 × 4.738×10^14=566×10^-16J

B)

But we know that

1 nm = 10^-9 m

Then we can Convert from nanometer to metre which is SI unit

Then 503 nm = 503×10^-9 m = 5.03×10^-7 m

c = 2.998×10^8 m/s

λ = 5.03×10^-7 m

But the frequency can be calculated as;

ƒ = c / λ

ƒ = (2.998×10^8 m/s) / (5.03×10^-7 m)

ƒ = 5.960×10^14 s-1

Energy= 6.626× 10^-34 × 5.960×10^14 s-1= 711.99×10^-16J

C)

1 nm = 10^-9 m

0.0520 nm = 0.0520×10^-9 m = 5.20×10^-11 m

Where the speed of light is

c = 2.998×10^8 m/s

λ = 5.20×10^-11 m

But the frequency can be calculated as;

ƒ = c / λ

ƒ = (2.998×10^8 m/s) / (5.20×10^-11 m)

ƒ = 5.765×10^18 s-1

Energy= 6.626× 10^-34 × 5.765×10^18 s-1= 688.69×10^-12J

Answer:

9.375

Explanation:

According to the chemical equation, for every 4 moles of gallium, 3 moles of sodium are needed to react.  Set up a ratio using this relationship to solve.

4/3 = 12.5/x

4x = 37.5

x = 9.375

You need 9.375 moles of sulfur.

Answer:

Explanation:

D

The substance which gives more ions in ionization will be more conductive and those giving less ions will be less conducting. Here, glucose only give no ion in water thus, it has the lower conductivity.

Ionization is the process of dissociation of compounds into its constituent ions. For example, HCl when dissolved in water will give H+ and Cl- ions. Similarly HNO₃  gives H+ and NO₃- ions in ionization.

Water can easily dissolves the ionic compounds by forming hydrogen bonds with them and thus easily ionises them The ions formed are mobile and conduct electricity. The more the number of ions the higher the electrical conductivity.

CaCl₂ gives Ca²⁺ and two Cl- ions and NH₃ gives NH₄⁺ ions and CO₂ gives H+ ions by the formation of carbonic acid. Wheres, glucose does not give its ions and thus has lower conductivity for the solution.

To find more on conductivity, refer here:

https://brainly.com/question/15085692

#SPJ5