Answer: False
Explanation: I just learned about this like 4 months ago lol
Answer:
false
Explanation:
Hope this helps
____ a device receiving a process variable
Answer:
Transmitter
Maybe this is the answer or the question is wrong.
Explanation:
In the world of process control, a Transmitter is a device that converts the signal produced by a sensor into a standard instrumentation signal representing a process variable being measured and controlled.
When gathering the information needed to create a database, the attributes the database must contain to store all the information an organization needs for its activities are _______ requirements.
Answer:
Access and security requirements
How does computer hardware and software work together?
Answer:
Computer software controls computer hardware which in order for a computer to effectively manipulate data and produce useful output I think.
Explanation:
Your co-worker who went to UCLA tells you that DHCP is not enabled at your new job, so you should just use the same IP address that you have at home to connect to the internet. He told you it should work because your computer is communicating with a unique public IP address at home, so no other computer in the world would have it. When you try this, your computer does not have internet access. Give two reasons why?
Answer:
1. internet connection is not enabled on the computer.
2. The DHCP server in the company is not enabled as well.
Explanation:
For a user to access the internet, the computer must have a public IP address that is either assigned to it by a service provider or dynamically from the DHCP server in the computer. In the case of the former, the user just needs to enable the internet connection to obtain the unique IP address.
If the DHCP server or the internet connection is not enabled, the user would not have access to the internet.
What is a key consideration when evaluating platforms?
Answer:
The continuous performance of reliability data integrity will lead to the benefit and profit of the platform's regular structure changes. Cleanliness in the platform whereas addresses the straightforward structure of task performance and adequate data integrity.
how to check if serial interface is dte ot DCE?
If you can see the DTE/DCE cable, you can tell by looking which router has the DCE interface connected to it - the letters "DTE" or "DCE" will either be molded into the connector itself, or if it's an older cable there should be a little piece of tape on the cable that tells you what the interface type is.
What is Mobile Edge Computing? Explain in tagalog.
Answer:
English: Multi-access edge computing, formerly mobile edge computing, is an ETSI-defined network architecture concept that enables cloud computing capabilities and an IT service environment at the edge of the cellular network and, more in general at the edge of any network.
Very very rough Tagalog: Ang multi-access edge computing, dating mobile edge computing, ay isang konsepto ng network architecture na tinukoy ng ETSI na nagbibigay-daan sa mga kakayahan sa cloud computing at isang IT service environment sa gilid ng cellular network at, higit sa pangkalahatan sa gilid ng anumang network.
Explanation:
Def locate_substring(dna_snippet, dna): This function takes in two strings, dna_snippet and dna, where dna_snippet is a substring of dna, and returns all locations of the substring as a list of integers. In other words, dna_snippet may exist in multiple locations within dna; you should return the beginning index position of each occurrence of dna_snippet inside of dna. Example: * Sample DNA snippet (substring): "ATAT" * Sample DNA string: "GATATATGCATATACTT" * The returned position list: [1, 3, 9]
Answer:
In Python. The function is as follows:
def locate_substring(dna_snippet, dna):
res = [i for i in range(len(dna_snippet)) if dna_snippet.startswith(dna, i)]
print("The returned position list : " + str(res))
Explanation:
This iterates defines the function
def locate_substring(dna_snippet, dna):
Check for all occurrence
res = [i for i in range(len(dna_snippet)) if dna_snippet.startswith(dna, i)]
print all occrrence
print("The returned all position list : " + str(res))
Following is the Python program to the given question.
PythonAccording to the question,
DNA Series: GATATATGCATATACTTDNA
Snippet: ATAT
Program: def locate_substring (dna_snippet, dna):
start = 0 while True: start = dna.
find(dna_snippet, start) #finding the first occurrence of dna_snippet in dna.
if start == -1: return # if dna.find() returns -1 yield start #Resumes next execution start += 1dna=input ("Enter the DNA sequence: ") dna_snippet=input
("Enter the DNA snippet: ") print(list(locate_substring(dna_snippet,dna )))
Program Explanation: Defining a function.
An infinite loop is being utilized just to produce the indexes from which dna snippet begins.
Determining the initial occurrence of dna snippet inside dna. storing the new occurrences of dna snippet throughout the starting point.
Whenever dna.find() returns minus one, it means there was no occurrence identified and the method should be exited.
Find out more information about Python here:
https://brainly.com/question/26497128
See the lseek_example.c file. Modify the lseek_example.c, such that it reads from an input file (named "start.txt") and will print to an output file (named "end.txt") every (1+3*i)th character, starting from the 1st character in the input file. In other words, it will print the 1st character, then skip 2 characters and print the 4th one, then skip 2 characters and print the 7th one, and so on.
For instance, for input file:
ABCDEFGHIJKLM
It will output:
ADGJM
Iseek_example.c file contant:
// C program to read nth byte of a file and
// copy it to another file using lseek
#include
#include
#include
#include
void func(char arr[], int n)
{
// Open the file for READ only.
int f_read = open("start.txt", O_RDONLY);
// Open the file for WRITE and READ only.
int f_write = open("end.txt", O_WRONLY);
int count = 0;
while (read(f_read, arr, 1))
{
// to write the 1st byte of the input file in
// the output file
if (count < n)
{
// SEEK_CUR specifies that
// the offset provided is relative to the
// current file position
lseek (f_read, n, SEEK_CUR);
write (f_write, arr, 1);
count = n;
}
// After the nth byte (now taking the alternate
// nth byte)
else
{
count = (2*n);
lseek(f_read, count, SEEK_CUR);
write(f_write, arr, 1);
}
}
close(f_write);
close(f_read);
}
// Driver code
int main()
{
char arr[100];
int n;
n = 5;
// Calling for the function
func(arr, n);
return 0;
}
Answer:
See the lseek_example.c file. Modify the lseek_example.c, such that it reads from an input file (named "start.txt") and will print to an output file (named "end.txt") every (1+3*i)th character, starting from the 1st character in the input file. In other words, it will print the 1st character, then skip 2 characters and print the 4th one, then skip 2 characters and print the 7th one, and so on.
For instance, for input file:
ABCDEFGHIJKLM
It will output:
ADGJM
Iseek_example.c file contant:
// C program to read nth byte of a file and
// copy it to another file using lseek
#include
#include
#include
#include
void func(char arr[], int n)
{
// Open the file for READ only.
int f_read = open("start.txt", O_RDONLY);
// Open the file for WRITE and READ only.
int f_write = open("end.txt", O_WRONLY);
int count = 0;
while (read(f_read, arr, 1))
{
// to write the 1st byte of the input file in
// the output file
if (count < n)
{
// SEEK_CUR specifies that
// the offset provided is relative to the
// current file position
lseek (f_read, n, SEEK_CUR);
write (f_write, arr, 1);
count = n;
}
// After the nth byte (now taking the alternate
// nth byte)
else
{
count = (2*n);
lseek(f_read, count, SEEK_CUR);
write(f_write, arr, 1);
}
}
close(f_write);
close(f_read);
}
// Driver code
int main()
{
char arr[100];
int n;
n = 5;
// Calling for the function
func(arr, n);
return 0;
}
Explanation:
Use the drop-down menu to complete each statement. First, calculate the time spent doing each activity _____ . Next, multiply each category by ____ . Then, ___ the totals. Last, subtract the total from ____ .
Answer:1. Every day 2. 7 3. add 4. 168
Explanation:
I got it right on Edge
First, calculate the time spent doing each activity every day. Next, multiply each category by 7. Then, add the totals. Last, subtract the total from 365.
What is the significance of the activity?The significance of activity may be determined by the fact that it usually enhances your health and lowers the threat of developing several diseases and other abnormal conditions like type 2 diabetes, cancer, and cardiovascular disease.
According to the context of this question, if you are required to calculate the time spent doing each activity in each day. You are required to make a chart that represents all such activities followed by multiplication. Then, you are considerably required to add the totals followed by subtracting the total from the total number of days in a year.
Therefore, first, calculate the time spent doing each activity every day. Next, multiply each category by 7. Then, add the totals. Last, subtract the total from 365.
To learn more about Activities, refer to the link:
https://brainly.com/question/26654050
#SPJ3
What Is the Purpose of a Web Browser? *
Answer:
This is your answer. If I'm right so,
Please mark me as brainliest. thanks!!!
Driving is expensive. Write a program with a car's miles/gallon and gas dollars/gallon (both doubles) as input, and output the gas cost for 20 miles, 75 miles, and 500 miles. Output each floating-point value with two digits after the decimal point, which can be achieved by executing cout << fixed << setprecision(2); once before all other cout statements.
Answer:
Explanation:
The following is written in C++ and asks the user for inputs in both miles/gallon and dollars/gallon and then calculates the gas cost for the requested mileages using the input values
#include <iostream>
#include <iomanip>
using namespace std;
int main () {
// distance in miles
float distance1 = 20.0, distance2 = 75.0, distance3 = 500.0;
float miles_gallon, dollars_gallon;
cout << "Enter cars miles/gallon: "; cin >> miles_gallon;
cout << "Enter cars dollars/gallon: "; cin >> dollars_gallon;
cout << "the gas cost for " << distance1 << " miles is " << fixed << setprecision(2) << (float) dollars_gallon * distance1 / miles_gallon << "$\n";
cout << "the gas cost for " << distance2 << " miles is " << fixed << setprecision(2) << (float) dollars_gallon * distance2 / miles_gallon << "$\n";
cout << "the gas cost for " << distance3 << " miles is " << fixed << setprecision(2) << (float) dollars_gallon * distance3 / miles_gallon << "$\n";
return 0;
}
Is there an alternative website of https://phantomtutors.com/ to get guidance in online classes?
Answer:
The website is
classroom
Explanation:
An administrator wants to restrict access to a particular database based upon a stringent set of requirements. The organization is using a discretionary access control model. The database cannot be written to during a specified period when transactions are being reconciled. What type of restriction might the administrator impose on access to the database
Answer:
Time of the day and object restrictions
Explanation:
From the question, we understand that the database is not allowed to be accessed at a certain period of time.
Because this has to do with time (period), the administrator will need to set a time of the day object restriction on the database in order to prevent the users from accessing the database objects
Develop a C program that calculates the final score and the average score for a student from his/her (1)class participation, (2) test, (3) assignment, (4) exam, and (5) practice scores. The program should use variables, cout, cin, getline(), type casting, and output manipulators. The user should enter the name of the student and scores ranging from 0 to 100 (integer) for each grading item. The final score is the sum of all grading items. The average score is the average of all grading items. Here is a sample output of the program: Enter the Student's name: John Smith Enter Class Participation Score ranging from 0 to 100: 89 Enter Test Score ranging from 0 to 100: 87 Enter Assignment Score ranging from 0 to 100: 67 Enter Exam Score ranging from 0 to 100: 99 Enter Practice Score ranging from 0 to 100: 80 John Smith: Final Score: 422 Average Score: 84.4 Submit: a flowchart . source file Hw3.cpp The screenshot of output
Answer:
Following are the code to the given question:
#include<iostream>//defining header file
using namespace std;
int main()//defining main method
{
float clspat,test,asst,exam,practice,total,average;//defining floating variable
char name[100];//defining char variable to input value
cout<<"Enter Name of Student: ";//print message
cin>>name; //input value
cout<<"Enter scores in following scoring items between 0 and 100:"<<"\n";//print message
cout<<"Enter class participation score: ";//print message
cin>>clspat;//input value
cout<<"Enter test score: ";//print message
cin>>test;//input value
cout<<"Enter assignment score: ";//print message
cin>>asst;//input value
cout<<"Enter exam score: ";//print message
cin>>exam;//input value
cout<<"Enter practice score: ";//print message
cin>>practice;//input value
total=clspat+test+asst+exam+practice;//calculating total value
average=total/5;//calculating average value
cout<<endl<<"SCORE CARD OF "<<name<<"\n"<<"-----------------------"<<"\n";//print value with message
cout<<"Total score: "<<total<<"\n";//print message with value
cout<<"Average score: "<<average; //print message with value
}
Output:
please find the attached file.
Explanation:
In this code, the floating-point variable is declared, which is used for input value from the user-end and after input the floating-point value it uses the "total, average" variable to calculate its respective values and store its value with init, after storing the value into the variable it uses the print method to print its values.
X274: Recursion Programming Exercise: Cannonballs Spherical objects, such as cannonballs, can be stacked to form a pyramid with one cannonball at the top, sitting on top of a square composed of four cannonballs, sitting on top of a square composed of nine cannonballs, and so forth.
RequireD:
Write a recursive function that takes as its argument the height of a pyramid of cannonballs and returns the number of cannonballs it contains.
Answer:
The function in C is as follows:
#include <stdio.h>
int C_ball(int height){
if(height == 1) {
return 1;}
return (height * height) + C_ball(height - 1);}
int main(){
int n;
printf("Height: ");
scanf("%d",&n);
printf("Balls: %d",C_ball(n));
return 0;
}
Explanation:
The function begins here
#include <stdio.h>
This defines the function
int C_ball(int height){
If height is 1, return 1
if(height == 1) {
return 1;}
This calls the function recursively
return (height * height) + C_ball(height - 1);}
The main begins here
int main(){
This declares the height as integer
int n;
This prompts the user for the height
printf("Height: ");
scanf("%d",&n);
This calls the function
printf("Balls: %d",C_ball(n));
return 0;
}
define a computer, state its 3 main activities with examples of the functions of each of those activities
Answer:
The four main functions of a computer are to:
- take data and instructions from a user
-process the data according to the instructions
- and display or store the processed data.
These functions are also referred as the input function, the procedure function, the output function, and the storage function.
Explanation:
differentiate between a university and a TVET college in terms of what each offers and explain the stigma associated with TVET colleges
Answer: See explanation
Explanation:
The main focus of a Technical Vocational Education and Training (TVET) college is to prepare the students and train them so that they'll be functional in a skilled trade. It focuses on vocational training and education. University isn't really concerned about transfer of skills but rather more concerned with the transfer of knowledge to the students
The Technical Vocational Education and Training (TVET) qualification is also faster, cheaper and easier to get than the university certificate which is costlier and takes longer period to get.
The stigma associated with TVET colleges has been created by both the society and the government. Firstly, people believed that only those from poor backgrounds or those that couldn't gain university admisson go to TVET colleges.
Also, the government isn't helping matters as public funding for education are allocated more to universities and not really allocated to TVET colleges. These has brought about the stigma to the TVET.
The difference between a university and a TVET college in terms of what each offers is university impact knowledge while TVET college is more of practical.
University and TVET collegeThe major difference is University provide students with knowledge the need based on the course they are studying while TVET colleges is more of practical as they provide the students with practical skills they need because they render technical and vocational education and training.
The stigma associated with TVET colleges is because people think that University student has higher opportunities when in labor market than TVET colleges student.
Inconclusion the difference between a university and a TVET college in terms of what each offers is university impact knowledge while TVET college is more of practical.
Learn more about University and TVET college here:https://brainly.com/question/26696444
NO LINKS OR I WILL DELETE YOUR FORTNITE ACCOUNT
What can you do with the free version of the splice editor
Answer:
can i have ur fortnite account if u hav one and dont use it :) i only say that cuz u mentioned fortnite
Explanation:
with the free version you can add effects (cheap effects) cut the video, crop some parts. and posting leaves a watermark until u buy money
Answer:
It has a 7 day free trial while your using the free version
Explanation:
Assume the data link protocol used by NDAS has the following associated characteristics:
An 8-bit ASCII code is used. Each frame has a size (length) of 11936 bits. A half-duplex circuit with a speed of 1 million bits per second is used for transmission. There is a 30-millisecond turnaround time on the half-duplex circuit. Each frame contains 20 overhead (non-user-data) bytes. Assume that the probability of a frame requiring retransmission due to error in transmission is 1 percent. A millisecond is one-thousandth of a second. Also, 8 bits = 1 character = 1byte
Fill in the blanks
K= _________ bits per bytes
M=_________ bytes
C= _________ overhead bytes
Answer:
The transmission speed = 0.278 MB/s
Explanation:
K = 8 bits
M = 11936/8 bits = 1492 bits
transmission rate R = 1000000/ 8 = 125000 bps
overhead bytes C = 20
probability = 0.01
time T = 30 ms = 30 x10^-3 s
The data transmission speed formula = K(M-C)(1-p) / (M/R) + T
= 8( 1492 - 20)(0.99)/ (1492/125000) + 30 x10^-3
= 0.278 MB/s
2. How has the internet changed the way that people get news?
Answer:
Explanation:
you can access news from anywhere and know what is going on
Answer:
Most of the news is fact due to the ablilty of anybody can make it
Explanation:
Which option in a Task element within Outlook indicates that the task is scheduled and will be completed on a later
date?
O Waiting on someone else
O In Progress
O Not started
O Deferred
Answer: D: Deferred
Explanation:
took test
What Are the Components of a Web Address? *
Answer:
What Are the Components of a Web Address?
1.Protocol. The first component of a web address is the protocol, which is also known as the scheme. ...
2.Domain Name. The domain name part of the web address is the unique identifier for the website on the internet. ...
3.Domain Extension. ...
4.Path & Filename.
What is the New York Times doing to try to keep up with digital technology?
Answer:
Clover Food Labs: Using Technology to Bring The “Real Food” Movement to Cambridge, ... The New York Times is one of the many companies that has had its existence ... That monthly limit has since been reduced to 10 articles in an attempt to ... which has at least kept pace with the limited expectations for the industry
Consider the regular expressions:
R1 = (01)* (0*1*) (10)
R2 = (101)* (01)*
R3 = (10) (01*)*(01)
R4 = 10(R2*)|R3
Recall that, for a list of regular expressions, the function getToken() returns the next token from the input that matches one of the regular expressions. If there is more than one match, the longest match is returned. If there is more than one longest match, the token with the longest match that appears first in the list is returned. If there is no match, ERROR is returned. If the function getToken() is called once on input 1000101, it will return:
a. R1
b. R2
c. R3
d. R4
e. ERROR
Answer:
c. R3
Explanation:
For R1;
there are 10 matches, after these 10 no matches occur again
for R2;
this also does not match more than 10 as we have in R1
for r3;
R3 has the longest match. Its matching can be done 1000101 times.
for r4;
The whole of r4 can be matched.
Error;
we cannot have an error because matches exist.
so in answer to this question we pick R3 as the solution because there are more than one longest march and the one returned in the list is that which appeared first. R3 came first
In this exercise we have to use computer knowledge to identify which is the correct sequence of code that best corresponds to the given question, in this way we have that the correct alternative is:
[tex]c. R3[/tex]
So analyzing the first alternative, we find;
For R1, there are 10 matches, after these 10 no matches occur again.
So analyzing the second alternative, we find;
For R2, this also does not match more than 10 as we have in R1
So analyzing the third alternative, we find;
R3 has the longest match. Its matching can be done 1000101 times.
So analyzing the fourth alternative, we find;
For R4, the whole of r4 can be matched.
So analyzing the fifth alternative, we find;
Error; we cannot have an error because matches exist.
So in answer to this question we pick R3 as the solution because there are more than one longest march and the one returned in the list is that which appeared first.
See more about computer at brainly.com/question/950632
Bugs always seem to creep into programs and code. What strategies have you learned to find bugs more easily and crush them with a fix?
The process involves in finding bugs as well as crushing them in a debugging process is extensive and this can consist of following process;
Examination of the error symptoms
identifying the cause of it
fixing of the error.
This process is usually required a large amount of work, Although no precise procedure that is set in for fixing all error, but some useful strategies that use in reducing the debugging effort.
One of the significant part of this process is localizing of the error, which is figuring out the cause as well as the symptoms. Strategies that I have learnt in finding and fixing the error in the process of debugging includes;Incremental as well as bottom-up program development; development of the program incrementally remains one of the most effective ways that can be used in localizing the error, often testing as the piece of code is added, so with this it will be easier to find the error since any error is from the last piece of code added.And also since the last fragment of the code will be small then searching for bugs won't take much time to find and debug.Bottom-up development helps in maximizing the benefits that comes from incremental development. With bottom-up development, after successful testing of a code, it's behavior will not change once another piece is added to it, since existing code will never replied on new part so it will be easier to trace error in the new code and fix it.Instrument program can be used to log information and there can be insertion of print statements.Instrument program using assertions; Assertions can be used in checking if the program actually maintains the properties or those invariant that the code relies on, Because the program will definitely stops once the assertion fails, and there is actuality that the point where the program reached and stops is closer to the cause, as well as good indicator of how the problem looks like , then the bug can then be fixed.breakpoints can be set in the program as well as stepping and over functions, then watching program expressions, as well as inspection of the memory contents at a particular point during the execution can give the needed run-time information.Backtracking: this option works in a way whereby one will need to start from the point that the problem occurred then go back through the code to to detect the issue, then the bug can then be fixed.Binary search: this is exploration of the code by using divide and conquer approach, so that the the bug be pin down quickly.Therefore, Bugs are treat to programs and they can be dealt with using discussed methods.
Learn more at: https://brainly.com/question/15289374?referrer=searchResults
Creative Commons material often costs money to use.
True
False
Answer:
true
Explanation:
Plz help, will guve brainliest to best answer (if i can)
Answer:
Online text:1,3,4
not online text:2,5
9. Which of the following is the
leading use of computer?
Complete Question:
What is the leading use of computers?
Group of answer choices.
a. web surfing.
b. email, texting, and social networking.
c. e-shopping.
d. word processing.
e. management of finances.
Answer:
b. email, texting, and social networking.
Explanation:
Communication can be defined as a process which typically involves the transfer of information from one person (sender) to another (recipient), through the use of semiotics, symbols and signs that are mutually understood by both parties. One of the most widely used communication channel or medium is an e-mail (electronic mail).
An e-mail is an acronym for electronic mail and it is a software application or program designed to let users send texts and multimedia messages over the internet.
Also, social media platforms (social network) serves as an effective communication channel for the dissemination of information in real-time from one person to another person within or in a different location. Both email and social networking involves texting and are mainly done on computer.
Hence, the leading use of computer is email, texting, and social networking.
Write a program that implements a class called Dog that contains instance data that represent the dog's name and age. • define the Dog constructor to accept and initialize instance data. • create a method to compute and return the age of the dog in "person-years" (note: dog age in person-years is seven times a dog's age). • Include a toString method that returns a one-line description of the dog • Write a driver class called Kennel, whose main method instantiated and updates several Dog objects
Answer:
Dog.java:
Dog{
//Declare instance variables
private String name;
private int age;
//Create the constructor with two parameters, and initialize the instance variables
public Dog(String name, int age){
this.name = name;
this.age = age;
}
//get methods
public String getName(){
return name;
}
public int getAge(){
return age;
}
//set methods
public void setName(String name){
this.name = name;
}
public void setAge(int age){
this.age = age;
}
//calculateAgeInPersonYears() method to calculate the age in person years by multiplying the age by 7
public int calculateAgeInPersonYears(){
return 7 * getAge();
}
//toString method to return the description of the dog
public String toString(){
return "Name: " + getName() + ", Age: " + getAge() + ", Age in Person Years: " + calculateAgeInPersonYears();
}
}
Kennel.java:
public class Kennel
{
public static void main(String[] args) {
//Create two dog objects using the constructor
Dog dog1 = new Dog("Dog1", 2);
Dog dog2 = new Dog("Dog2", 5);
//Print their information using the toString method
System.out.println(dog1.toString());
System.out.println(dog2.toString());
//Update the first dog's name using setName method
dog1.setName("Doggy");
System.out.println(dog1.toString());
//Update the second dog's age using setAge method
dog2.setAge(1);
System.out.println(dog2.toString());
}
}
Explanation:
*The code is in Java.
You may see the explanations as comments in the code