A chemist must dilute of aqueous potassium iodide solution until the concentration falls to . He'll do this by adding distilled water to the solution until it reaches a certain final volume. Calculate this final volume, in liters. Round your answer to significant digits.

Answer:

The answers to your questions are given below.

Explanation:

1. __H₂ + __O₂ —> __H₂O

The above equation can be balance as follow:

H₂ + O₂ —> H₂O

There are 2 atoms of O on the left side and 1 atom on the right side. It can be balance by writing 2 before H₂O as shown below:

H₂ + O₂ —> 2H₂O

There are 2 atoms of H on the left side and a total of 4 atoms on the right side. It can be balance by writing 2 before H₂ as shown below:

2H₂ + O₂ —> 2H₂O

Now the equation is balanced.

Elements >>> Reactants >>> Products

H >>>>>>>>> 4 >>>>>>>>>>> 4

O >>>>>>>>> 2 >>>>>>>>>>> 2

2. __ P₄ + __O₂ —> __P₂O₃

The above equation can be balance as follow:

P₄ + O₂ —> P₂O₃

There are 4 atoms of P on the left side and 2 atoms on the right side. It can be balance by writing 2 before P₂O₃ as shown below:

P₄ + O₂ —> 2P₂O₃

There are 2 atoms of O on the left side and a total of 6 atoms on the right side. It can be balance by writing 3 before O₂ as shown below:

P₄ + 3O₂ —> 2P₂O₃

Now, the equation is balanced

Elements >>> Reactants >>> Products

P >>>>>>>>> 4 >>>>>>>>>>> 4

O >>>>>>>>> 6 >>>>>>>>>>> 6

Answer:

ummm u ok?

Explanation:

Answer:

The answer is "62.33 mol atoms".

Explanation:

In the propane molecule, it  includes 8 atoms of Hydrogen for every 3 atoms of Carbon or 8 mol Hydrogen atoms for each of the 3 mol Carbon  atoms.

[tex]\text{H atoms mole}= 17.0 \ \text{mols of C atoms} \times \frac{8 \text{mol H atoms}}{3 \text{mol H atoms}} =45.33\ \text{mol H atoms}[/tex]

Total atoms = 17.0 mols of C atoms +45.33 mols of H atoms

                    =62.33 mol atoms

Answer:

[tex]d=9.5g/L[/tex]

Explanation:

Hello there!

In this case, according to the given information, it i possible for us to calculate the density of this gas via the ideal gas equation, according to the following setup:

[tex]PV=nRT\\\\P=\frac{mRT}{V*MM} \\\\\frac{m}{V}=d=\frac{P*MM}{RT}[/tex]

Thus, we plug in the variables (pressure in atm and temperature in K) to obtain:

[tex]d=\frac{113.6368atm*2.02g/mol}{0.08206\frac{atm*L}{mol*K}*(21+273)K} \\\\d=9.5g/L[/tex]

Regards!

Answer:

m = 4.58 g.

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to realize this problem is solved via the ideal gas equation:

[tex]PV=nRT[/tex]

As we can calculate the moles of propane given the pressure, temperature and volume as shown below:

[tex]n=\frac{PV}{RT} \\\\n=\frac{1.10atm*2.00L}{0.08206\frac{atm*L}{mol*K}*258K} \\\\n=0.104mol[/tex]

Finally, since the molar mass of propane is 44.1 g/mol, we calculate the mass by following the shown below mole-mass conversion factor:

[tex]m=0.104mol*\frac{44.1g}{1mol}\\\\m= 4.58g[/tex]

Regards!

Answer:

540,000 (5.4X10^5)

Explanation:

kj means Kilojoules, while we are converting to joules.

- Kilo, or k, represents our base value, Joules, multiplied by 10^3. To convert to joules, we would simply multiply by 10^3 (which is 1000)

Answer:

[tex]CH_3COOH+CH_3CH_2CH_2CH_2OH\rightarrow CH_3COOCH_2CH_2CH_2CH_3+H_2O[/tex]

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to realize this is a question about esterification, process whereby a carboxylic acid and an alcohol react to produce water an an ester, we can set it up as shown below:

[tex]CH_3COOH+CH_3CH_2CH_2CH_2OH[/tex]

For the reaction between ethanoic acid and butanol; and therefore, the products side is:

[tex]CH_3COOCH_2CH_2CH_2CH_3+H_2O[/tex]

It means that the overall equation is:

[tex]CH_3COOH+CH_3CH_2CH_2CH_2OH\rightarrow CH_3COOCH_2CH_2CH_2CH_3+H_2O[/tex]

And the ester product is butyl ethanoate.

Regards!

Answer:

By measuring out 3.9 grams of cobalt (II) chloride up to a volume of 1.0 L of solution.

Explanation:

Hello there!

In this case, considering this question about molarity, it turns out possible for us to calculate the required mass of cobalt (II) chloride by firstly compute the moles present in 1.0L of the given 0.03-M solution:

[tex]M=\frac{n}{V} \\n=V*M\\\\n=1.0L*0.03\frac{molCoCl_2}{L}\\\\n=0.03molCoCl_2[/tex]

Next, since the molar mass of cobalt (II) chloride is 129.84 g/mol, we compute the grams we need to measure out in order to prepare this solution:

[tex]m_{CoCl_2}=0.03molCoCl_2*\frac{129.84gCoCl_2}{1molCoCl_2} \\\\m_{CoCl_2}=3.9gCoCl_2[/tex]

Regards!

Answer:

92.1 g

Explanation:

Answer: 92.1 grams

I hope this helped :3

Answer:

A B D

Explanation:

Answer:  A: Being the power source of stars

                B: Forming heavier elements from light elements

                D: Being used in thermonuclear weapons

Explanation: (Edmentum)

Explanation:

2nacl+baso4

the orginal equation is

Na2so4+Bacl2

then na react with cl and ba react with so4

E= hf

so shorter lambda = larger f= more energy

Answer is A

The wavelength of an EM wave related to its energy as "The shorter the wavelength of a wave, the higher its energy".

Electromagnetic radiation is a type of energy that is all around us and takes many forms, such as radio waves, microwaves, X-rays and gamma-rays. Sunlight is also a form of electromagnetic energy, but visible light is only a small portion of the electromagnetic spectrum, which contains a broad range of wavelengths.

In order from highest to lowest energy, the sections of the EM spectrum are named: gamma rays, X-rays, ultraviolet radiation, visible light, infrared radiation, and radio waves. In order from highest to lowest wavelength, the series is just opposite.

Electromagnetic radiations don't require any medium to travel and also travel in speed of light. They have Electric field vector and magnetic field vector that is perpendicular to each other and also are perpendicular to the direction of propagation.

Therefore, the wavelength of an EM wave related to its energy as "The shorter the wavelength of a wave, the higher its energy".

Learn more about EM wave, here:

https://brainly.com/question/18729221

#SPJ7

Answer:

The data will be error free and more correct.

Explanation:

The data will show no error while testing the adsorptive properties of a new material if no centrifuge method is not used because there is no need for centrifuge method. For determining the adsorptive properties of a new material, we can measure the data after dissolving . Adsorption is the adhesion of atoms, ions or molecules from a gas, liquid or dissolved solid to a surface while on the other hand, Centrifugation is the process where a mixture is separated from one another through fast spinning. so for determining the adsorptive properties, no centrifugation process is required and we get the correct data without centrifugation.

Answer:

1577 °C

Explanation:

Step 1: Calculate the volume of the cylinder

The diameter of the base (d) is 13.0 cm and the height (h) is 15.6 cm. We will use the following expression.

V = h × π × (d/2)²

V = 15.6 cm × π × (13.0 cm/2)² = 8.28 × 10³ cm³ = 8.28 × 10³ mL = 8.28 L

Step 2: Calculate the moles of BF₃

We have 0.0985 kg (98.5 g) of BF₃, whose molar mass is 67.81 g/mol.

98.5 g × 1 mol/67.81 g = 1.45 mol

Step 3: Convert 2.70 MPa to atm

We will use the conversion factor 1 MPa = 9.86923 atm.

2.70 MPa × 9.86923 atm/1 MPa = 26.6 atm

Step 4: Calculate the maximum safe operating temperature

We will use the ideal gas equation.

P × V = n × R × T

T = P × V / n × R

T = 26.6 atm × 8.28 L / 1.45 mol × (0.0821 atm.L/mol.K) = 1850 K

We can convert 1850 K to Celsius using the following expression.

°C = K - 273.15 = 1850 K - 273.15 = 1577 °C

Answer:

????

Explanation:

Atomic number = The number of proton in an atom or ion so the right answer is 5!

Explanation:

To show - from E=mc²=hv show that wavelength=h/mv​

Proof -

Given that,

E = mc²

E = hν

By equating both the equations, we get

mc² = hν

Because real particles do not travel at the speed of light, De Broglie submitted velocity ( v ) for the speed of light ( c ).

mv² = hν

Through the equation  λ , de Broglie substituted  v/λ  for  ν  and arrived at the final expression that relates wavelength and particle with speed.

mv² = hv/λ

⇒λ = hv/mv²

⇒λ = h/mv

Hence showed.

Answer:

IUPAC

Explanation:

International Union of Pure and Applied Chemistry

Answer:

C, energy cannot be created nor destroyed.

Explanation:

Answer: There are 1.53 moles present in [tex]9.23 \times 10^{23}[/tex]  molecules of water in a beaker.

Explanation:

According to the mole concept, there are [tex]6.022 \times 10^{23}[/tex] molecules present in 1 mole of a substance.

So, number of moles present in [tex]9.23 \times 10^{23}[/tex] molecules are calculated as follows.

[tex]Moles = \frac{9.23 \times 10^{23}}{6.022 \times 10^{23}}\\= 1.53 moles[/tex]

Thus, we can conclude that there are 1.53 moles present in [tex]9.23 \times 10^{23}[/tex]  molecules of water in a beaker.

Answer:

HCl(aq) + NaOH(aq) ⇒ NaCl(aq) + H₂O(l)

H⁺(aq) + OH⁻ ⇒ H₂O(l)

Explanation:

Let's consider the balanced chemical equation (molecular equation) for the reaction between hydrochloric acid and sodium hydroxide. This is a neutralization reaction.

HCl(aq) + NaOH(aq) ⇒ NaCl(aq) + H₂O(l)

The complete ionic equation includes all the ions and the molecular species.

H⁺(aq) + Cl⁻(aq) + Na⁺(aq) + OH⁻ ⇒ Na⁺(aq) + Cl⁻(aq) + H₂O(l)

The net ionic equation includes only the ions that participate in the reaction (not spectator ions) and the molecular species.

H⁺(aq) + OH⁻ ⇒ H₂O(l)

b is the correct answer

Answer: D. 99.9mg/L

Explanation:

21.1x4.97/1.05=99.9

Answer:

well when you eat some food you will get many tastes mixed with base and acid but salt from NA2CO3 can be a base if it is contained with weak acid.

Explanation:

Basically SALT can be one common base that is NOT harmful to the body when ingested AND a product, or way, in which it is used.

Magnesium hydroxide (Mg(OH)2) is not harmful to our body when ingested AND a product, or way, in which it is used. It is commonly used to get relief from acidity, that is caused when our stomach releases excessive acid. It neutrelises the acid and gives us relief. It is also called Milk of Magnesia commonly.

answer of this question is [Ar]3d8 4s2

Answer: [Ar] 3d8 4s2

Explanation: Wikipedia

Answer:

D

Explanation:

Answer:

D

Explanation:

Because it is true

Answer:

whats the question?

Explanation:

Answer:

Isomerism is the phenomenon in which more than one compounds have the same chemical formula but different chemical structures. Chemical compounds that have identical chemical formulae but differ in properties and the arrangement of atoms in the molecule are called isomers. Therefore, the compounds that exhibit isomerism are known as isomers.

The word “isomer” is derived from the Greek words “isos” and “meros”, which mean “equal parts”. This term was coined by the Swedish chemist Jacob Berzelius in the year 1830.

Explanation:

Answer:

3 Both mass and charge are conserved.

Explanation:

The equation of the reaction is;

Cu(s) + 2Ag+ (aq) → Cu2+ (aq)  + 2Ag(s)

A redox reaction is an acronym for oxidation-reduction reaction. This refers to a reaction in which the oxidation number of one specie is increased while the oxidation number of the other specie is decreased.

This means that one specie looses electrons while the other specie gains electrons. Here, Cu(s) looses electrons while Ag+(aq) gains electrons from left to right in the reaction.

In a redox reaction, both mass and charge are conserved. This means that the total mass and charge on the reactants side is the same as the total mass and charge on the products side.

Answer:

Can you translate it on English so we can understand