Answer:
c.
Explanation:
If the object starts to slide it must be on a slope.
There are 2 forces acting on the object - gravity and the friction between the object and the surface.
If sliding starts then the forces must be unbalanced.
The force of gravity is greater than the friction.
Answer:c
Explanation:
When two continental plates of similar
densities collide,
A. they remain level since densities in both plates are equal.
B. they both push back down into the mantle
C. one plate rides over the other one and forms a trench
D.they buckle upward and form mountains
Answer:
D. They buckle upward and form mountains.
Explanation:
When two plates (either oceanic or terrestrial) converge and they are of similar density then they will crash into each other and form mountains. A great example of this is when India crashed into the Asian continent and the Himalayas were formed.
EMERGENCY!!! Can someone tell me the answer plz plz I’ll give you brainlist and points plz This is my final test No wrong answers
Answer:
A. the valence electrons
Explanation:
Answer:
The valence electrons
Explanation:
The valence electrons determine an element's properties because chemical properties of each element are determined by the element's electronic configuration and PARTICULARLY by its outermost valence electrons. I hope it helps!
~Good luck
“True or False”
Unsaturated solution contains the maximum amount of solute dissolved by a given amount of solvent
ANSWER- True
EPLANATION
15. Name the element that has 3 energy levels and 3 valence electrons. *
Answer:
aluminium ..............
What is the relationship between Force and Velocity?
Affect/Effect
Cause/Blame
Claim/Reasoning
Cause/Effect
Answer:
Cause/ effect relationship.
Explanation:
because the force is the cause of energy that is present and velocity is the effect (speed) that is present.
Whic statements explain why rocks weather at different rates? Check all that apply
Explanation:
Weathering occurs one of three ways: through physical processes such as freezing and thawing, because of live organisms whose roots break rocks or through chemical processes that occur when carbon dioxide in the soil and air and mixes with water and specific minerals in rocks to form a weak acid that reduces rocks into silt, soil and sediment.
Chemical weathering typically increases as temperatures rise and rain falls, which means rocks in hot and wet climates experience faster rates of chemical weathering than do rocks in cold, dry climates.
Read all above and you may just find your answer!What is the molecule that formed between B and F?
Answer:
Hydrogen bond strengths range from 4 kJ to 50 kJ per mole of hydrogen bonds. In molecules containing N-H, O-H or F-H bonds, the large difference in electronegativity between the H atom and the N, O or F atom leads to a highly polar covalent bond (i.e., a bond dipole).
Explanation:
A student heats a 2.5 g sample of calcium carbonate in a test tube. What mass of calcium oxide remains in the test tube when the reaction is complete?
CaCO3(s) = CaO(s) + CO2(g)
Select one:
a. 1.4 g CaO
b. 2.1 g CaO
c. 2.5 g CaO
d. 1.0 g CaO
Answer:
1.4 g CaO
Explanation:
Given data:
Mass of calcium carbonate = 2.5 g
Mass of Cao remain in tube = ?
Solution:
Chemical equation:
CaCO₃ → CaO + CO₂
Number of moles of CaO:
Number of moles = mass/molar mass
Number of moles = 2.5 g/ 100 g/mol
Number of moles = 0.025 mol
now we will compare the moles of CaO with CaCO₃.
CaCO₃ : CaO
1 : 1
0.025 : 0.025
Mass of CaO:
Mass = number of moles × molar mass
Mass = 0.025 mol × 56 g/mol
Mass = 1.4 g
Answer:
1.4g CaO
Explanation:
Did the exam and got it right. Hope this helps
Which device converts the mechanical energy of a spinning magnet into electrical energy?
Aluminum nitrate reacts with sodium hydroxide to form a precipitate of aluminum hydroxide. What mass of aluminum hydroxide will precipitate when 35.5 mL of 0.145 mol/L aqueous aluminum nitrate is mixed with 44.2 mL of 0.215 mol/L aqueous sodium hydroxide?
Answer:
The mass of aluminum hydroxide that will precipitate when 35.5 mL of 0.145 mol/L aqueous aluminum nitrate is mixed with 44.2 mL of 0.215 mol/L aqueous sodium hydroxide is approximately 0.247 grams
Explanation:
The given parameters are;
The volume of 0.145 mol/L aqueous aluminum nitrate in the reaction = 35.5 mL
The volume of 0.215 mol/L aqueous sodium hydroxide in the reaction = 44.2 mL
The balanced chemical equation for the reaction is given as follows;
Al(NO₃)₃ (aq) + 3NaOH (aq) → Al(OH)₃ (s) + 3NaNO₃ (aq)
Therefore;
1 mole of Al(NO₃)₃, reacts with 3 moles of NaOH to form 1 mole Al(OH)₃, and 3 moles of NaNO₃
The number of moles of aqueous aluminum nitrate in the reaction = 35.5/1000 L × 0.145 mol/L = 0.0051475 moles
The number of moles of aqueous sodium hydroxide in the reaction = 44.2/1000 L × 0.215 mol/L = 0.009503 moles
Therefore, 0.009503 moles NaOH will react with 0.009503/3 moles Al(NO₃)₃ to form 0.009503/3 moles of aluminum hydroxide precipitate
The molar mass of aluminum hydroxide = 78 g/mol
Therefore, 0.009503/3 moles of aluminum hydroxide weighs 78 × 0.009503/3 = 0.247078 grams
The mass of aluminum hydroxide that will precipitate out ≈ 0.247 grams.
i need to know what occupied vs full means for chemistry
2. How many liters of propane gas (C3H8) will undergo complete combustion with 34.0 L of oxygen gas? ___ C3H8 (g) + ___ O2 (g → ___ CO2 (g + ___ H2O(g
Answer:
6.8 liters of propane gas will undergo a complete combustion with 34.0 L of oxygen gas.
Explanation:
Given;
combustion reaction of propane and oxygen;
C₃H₈ + O₂(g) → CO₂(g) + H₂O(g)
Balance the chemical reaction as follows;
C₃H₈ + 5O₂(g) → 3CO₂(g) + 4H₂O(g)
From the balanced equation;
1 mole of C₃H₈ ---------------- 5 moles of 5O₂(g)
x Liters of C₃H₈ ----------------- 34.0 Liters of O₂(g)
x = 34 liters / 5
x = 6.8 liters
Therefore, 6.8 liters of propane gas will undergo a complete combustion with 34.0 L of oxygen gas.
You discovered a new compound with the following formula: H(O) Pe. Using the information below, what would be the correct name for this compound?
*H(O) is an Alkaline Earth Metal.
*Pe is classified as a Halogen.
Answer:
Home personide.
Explanation:
In relation of Magnesium and Chlorine, MgCl2 is called Magnesium chloride
A ball is moving at a speed of 6.70 m/s. If the kinetic energy of the ball is 3.10 J, what is the mass of the ball?
Answer:
0.14 kgExplanation:
The mass of the ball can be found by using the formula
[tex]m = \frac{2k}{ {v}^{2} } \\ [/tex]
v is the velocity
k is the kinetic energy
From the question we have
[tex]m = \frac{2(3.10)}{ {6.70}^{2} } = \frac{6.20}{44.89} \\ = 0.138115...[/tex]
We have the final answer as
0.14 kgHope this helps you
A local plant nursery uses large sprinklers to water the plants twice a day. The water contains phosphorus, which is a fertilizer that helps plants grow. Some of the water becomes runoff and ends up in nearby streams and lakes. This is an example of which type of short-term human-induced environmental change? eutrophication
Answer:
It’s eutrophication
Explanation:
There is no way it can be DEFORESTATION or NON SUSTAINABLE SPECIES
Non sustainable harvesting has something to do with animals and eutrophication means adding excessive nutrients
Answer:A.
Explanation: I took the test, sorry if this is incorrect
What is this called? it might be sideways but it show look like a Y
Answer:
I'm thinking it might be Element 39: Yttrium, as this is Chemistry.
Explanation:
When using a light microscope, focus the specimen with the scanning objective
lens first.
Reasoning:
Answer:
The light microscope bends a beam of light at the specimen using a series of lenses to provide a clear image of the specimen to the observer.
Complete the passage:
During the process of polymerization____
combine by sharing electrons. This process forms a
,____which is made of repeating subunits. The resulting material is used in a variety of ways.
Answer:
During the process of polymerization, monomers
combine by sharing electrons. This process forms a polymer, which is made of repeating subunits. The resulting material is used in a variety of ways.
Answer:
monomers and polymer.
Explanation:
What are some ways that propane, butane, gasoline, diesel, and kerosene can be compared?
Answer:
Propane and butane are pure substances, which means that each one of them is made of only one type of molecule—propane molecules or butane molecules. In contrast, gasoline, diesel, and kerosene are not pure substances; they are mixtures of more than one substance.
Explanation:
Hope it is helpful...
Propane, butane, gasoline, diesel and kerosene are all hydrocarbons. They can be produced from petroleum. All these are used as fuels.
What are hydrocarbons ?Hydrocarbons are organic compounds containing C-C backbone and C-H bonds, These compounds are composed of carbons and hydrogens. Different function groups can be added to the hydrocarbons to form various organic compounds such as acids, esters , aldehydes, ketones etc.
Methane is the first hydrocarbon in the hierarchy based on number of carbons. Propane is third in this series since it contains 3 carbons and butane is 4th one. Gasoline, diesel and kerosene are all hydrocarbons with different carbon numbers.
All these are obtained as a byproduct of petroleum. These are used as fuel in vehicles and house holds. The difference in them is the number of carbon and hydrogen.
Find more on hydrocarbons:
https://brainly.com/question/12433190
#SPJ2
The Guarantee Clause gives the legislature the power to make all necessary and proper laws.
Answer:
True
Explanation:
Answer:
True ;)
Explanation:
Which of the following would be the best soil for gardening?
A )A soil that is 35 percent sand, 30 percent clay, and 35 percent silt
B) A soil that is 10 percent sand, 80 percent clay, and 10 percent silt
C) A soil that is 5 percent sand, 20 percent clay, and 75 percent silt
D) A soil that is 85 percent sand, 10 percent clay, and 5 percent silt
Answer:
C
Explanation:
Silt is very benifical for plant growth. So the one with the most silt would be the best for gardening soil.
Answer: C
Explanation:
___SeCl6+ ____ O2——> ___ seO2 +___Cl2
If you can do this I need help with more
Answer:
SeCl6 + O2——> seO2 + 3Cl2
What is the minimum number of kiloJoules needed to change 40.0 grams of water at 100C to steam at the same temperature and pressure
Answer:
90.4Kg
Explanation:
The energy required= latent heat of vaporization
Latent heat of vaporization of water= 2260 KJ/Kg
Mass of water = 0.04 Kg
Heat required= 0.04Kg× 2260 KJ/Kg
Heat required= 90.4Kg
Answer: The minimum number of kilo Joules needed is 90.4KJ.
Explanation:
The energy required= latent heat of vaporization.
Latent heat of vaporization of water= 2260 KJ/Kg
Mass of water = 0.04 Kg
Heat required= 0.04Kg× 2260 KJ/Kg
Heat required= 90.4KJ.
Learn more: https://brainly.com/question/2477358
What is the mass of NaCl produced when 2.0 moles of chlorine gas
are reacted with excess sodium? The equation is given.
2 Na + Cl2 → 2 NaCl
Answer:
Mass = 234 g
Explanation:
Given data:
Mass of NaCl produced = ?
Moles of chlorine = 2.0 mol
Solution:
Chemical equation:
2Na + Cl₂ → 2NaCl
now we will compare the moles of NaCl with chlorine gas.
Cl₂ : NaCl
1 : 2
2.0 : 2/1×2.0 = 4.0 mol
Mass of NaCl;
Mass = number of moles × molar mass
Mass = 4.0 mol × 58.5 g/mol
Mass = 234 g
What math is used to find density?
Answer:
[tex]\huge\mathtt{{\colorbox{silver}{ANSWER~~~↴}}}[/tex]
Density is the mass of an object divided by its volume. Density often has units of grams per cubic centimeter (g/cm3). Remember, grams is a mass and cubic centimeters is a volume (the same volume as 1 milliliter).
▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃▃
3. Hydrogen reacts with nitrogen to produce ammonia according to the equation:
3H2(g) + N2(g) 2NH3(g)
Determine how much ammonia would be produced if 100g of N2 reacts?
Mass of ammonia produced : 121.38 g
Further explanationGiven
Reaction
3H₂(g) + N₂(g) ⇒ 2NH₃(g)
100g of N₂
Required
Ammonia produced
Solution
mol of N₂ :
[tex]\tt mol=\dfrac{mass}{MW}\\\\mol=\dfrac{100}{28}\\\\mol=3.57[/tex]
From the equation, mol ratio of N₂ and NH₃ = 1 : 2, so mol NH₃ :
[tex]\tt \dfrac{2}{1}\times 3.57=7.14~moles[/tex]
mass of NH₃(MW=17 g/mol) :
[tex]\tt mass=mol\times MW\\\\mass=7.14\times 17\\\\mass=121.38~g[/tex]
Order the following elements from Highest to Lowest Electronegativity.
K, Sc, Ca, Zn, Br
Sc, K, Br, Zn, Ca
OK, Ca, Sc, Zn, Br
O Br, Zn, Sc, Ca, K
Ca, Zn, Br, K, SC
Answer:
O, Ca, Zn, Br
Sc, K, Br,
Explanation:
The correct order of the chemical elements from highest to lowest electronegativity is: C. Br, Zn, Sc, Ca, K.
Electronegativity refers to a measure of the ability of an atom of a chemical element to attract any shared pair of electrons.
Generally, the electronegativity of a chemical element typically increases across the period from left to right.
In Chemistry, the electronegativity of some of the chemical element are:
Bromine (Br) = 2.96Calcium (Ca) = 1.0Zinc (Zn) = 1.65Potassium (k) = 0.82Scandium (Sc) = 1.36Hence, the order of the chemical elements from highest to lowest electronegativity is:
1. Bromine (Br) = 2.96
2. Zinc (Zn) = 1.65
3. Scandium (Sc) = 1.36
4. Calcium (Ca) = 1.0
5. Potassium (k) = 0.82
Read more: https://brainly.com/question/18214726
pls help question 2 ill attach a picture
Answer:
X 154
Check solution in explanation
Explanation:
Average atomic mass = ( mass 1× abudance) + ( mass 2× abudance)+ ( mass 3× abudance) / 100
(149×13.8)+(152×44.9) +(154×41.3)/100
2056.2 + 6824.8 + 6360.2/100
=152.412
Is honors high school chemistry hard? Is it hard mathematically? please answer ASAP i have to put in my courses for next year.
Explanation:
yes its hard if you don't pay attention.
Yes, the math is harder but chemistry is not it's really fun the math does get harder tho.
what are the three things transported by global ocean circulation?
Answer:
The produce large circular currents in all the ocean basins. Currents, The North Equatorial Current, the Gulf Stream, the North Atlantic Current, and the Canary Current.
Explanation: