Hi there!
Recall:
Impulse = Change in momentum
I = Δp = mΔv = m(vf - vi)
Let the direction TOWARDS the floor be POSITIVE, and AWAY be NEGATIVE.
Plug in the givan values:
Δp = 1.5(-10 - 12) = -33 Ns
**OR, the magnitude: |-33| = 33 Ns
Select the correct answers from the list.(1 point) A black hole begins to form as an aging star abruptly collapses when it ceases__________ . This occurs after the star has consumed its component elements in this order___________.
A black hole forms as a star collapses when it ceases emitting radiation from fusion reactions. This occurs after the star has consumed hydrogen, helium, then through iron.
Star evolution refers to the process by which stars evolve (change) over time.
A black hole can be defined as a collapsed star where the gravitational field in its nucleus becomes greater than particles cannot escape from it.
In consequence, black holes are cosmic bodies in which gravity is so powerful that nothing (i.e., particles, radiation, light, etc.) can escape from them.
Nuclear fusion refers to the energy reactions produced by the fusion of hydrogen at the core of a star, thereby becoming helium.
Learn more about black holes here:
https://brainly.com/question/10597324
imagine that you’re riding in a car. the car suddenly begins to accelerate forward (positive acceleration). what do you feel as you sit in the seat
Answer:
Because the car is accelerating forward, you will feel your body push backwards, into the back of the seat.
Which shows the stars in the correct order, from smallest in size to largest?
white dwarf, Sun, red supergiant
Sun, red supergiant, white dwarf
white dwarf, red supergiant, Sun
Sun, white dwarf, red supergiant
Answer:
its A
Explanation:
White dwarf, Sun, red supergiant shows the stars in the correct order, from smallest in size to largest.
What is the size stars?More than 1.4 million kilometers span our Sun. However, not every star is the same size. They range in size from that of a metropolis to that of our solar system's half!
The mass of neutron stars is concentrated into a very compact area. Even though they are frequently only 20 to 40 km in diameter, they may hold the mass of one or two Suns. White dwarf stars are a little larger and frequently resemble the size of the Earth.
Compared to our Sun, the greatest supergiant stars can be more than 1500 times bigger. They are now more than 2,000 million kilometres across. Supergiants don't, however, have thousands of times the mass of the Sun. The reason for this is that as supergiants become older, their interiors become considerably more dispersed. Betelgeuse, a red giant in Orion's constellation, is nearly 1000 times broader than the Sun yet only has around 15 times as much mass.
Learn more about star here:
https://brainly.com/question/7379319
#SPJ2
what is 7 kg on the moon in newtons?
Answer:
11.37N
Explanation:
We can use the GUESS method to derive our solution.
Given:
We know our mass, and our acceleration. The acceleration on the moon is 1.625m/s^2.
[tex]m = 7kg \\ a = 1.625 \frac{m}{ {s}^{2} } [/tex]
Unknown:
We don't know, and are trying to find the force in Newtons.
[tex]F[/tex]
Equation:
We can use Newton's second law to find the solution.
[tex]F = ma[/tex]
Substitute:
Let's substitute our values into our equation.
[tex]F = 7 \times 1.625[/tex]
Solve:
We find our solution after solving for F.
[tex]7 \times 1.625 = F \\ 11.37 = F[/tex]
Our solution is 11.37N
How far does an object travel if it is moving at a speed of 4 m/s for 3.2 seconds?
SOMEONE PLEASE HELP ME
Answer:
12.8 metres
Explanation:
distance = speed x time
distance = 4 x 3.2
distance = 12.8
An object is struck by a 5N force for 8 seconds causing the object to experience a change in it's motion. What is the impulse acting on the object?
Hi there!
Recall the equation for impulse:
[tex]I = \Delta p = F * t[/tex]
Where:
I = Impulse (Ns)
F = Force (N)
t = Time (s)
Plug in the given values:
I = 5 · 8 = 40 Ns
if the wave velocity and frequency of a wave are both doubled, the wavelength is
If the wave velocity and frequency of a wave are both doubled, the wavelength will remain the same.
The wavelength of a wave shows the spatial orientation of distance between two successive crest in a wave medium.
The wavelength λ is expressed by using the relation:
[tex]\mathbf{\lambda = \dfrac{v}{f}}[/tex]
Now, if velocity and frequency of wave is both doubled, the wavelength will remain the same.
Learn more about wavelength here:
https://brainly.com/question/10750459
Give two properties of an object that can be affected by a
physical change.
Joey is performing an experiment in science class. He mixes two liquids in a test tube, and gas bubbles
appear at the surface of the test tube. Which of the following describes what is most likely taking place?
a.) A physical change is causing a change the phase from liquid to gas.
b. A chemical change has caused the liquids to undergo combustion and gas is escaping.
c. A physical change is causing the isolation to exhibit different properties than the original
substances.
d. A chemical change has resulted in the production of a new substance, which is being given off
as gas.
Answer:
The answer is D
Explanation:
Gas is made when chemical change happens. The chemical change has made a new substance gas. It cannot be combustion unless it is hot or was on fire.
A chemical change has resulted in the production of a new substance, which is being given off.
The correct option is D.
What is called chemical change?A chemical change is any process that converts one material into another, produces new compounds with unique features, or combines any of these processes. When two compounds combine to generate a new material, it takes place (synthesis or either decomposes to form more substances).
What takes place when chemicals change?Breaking covalent bond between reactant molecules (particles) and creating new bond between atoms in product particles are two aspects of chemical reactions (molecules). While there are the same number of atoms both before and after the biochemical transition, there will be a change in the number of molecules.
To know more about Chemical change visit:
https://brainly.com/question/2591189
#SPJ2
Jonathan is pushing a 25 kg box with a force of 135 N. The friction opposing the motion is unknown. The overall net force for the box is 70 N. Using this information calculate the magnitude of the frictional force of the box.
The magnitude of the frictional force of the box is 65 N
From the question given above, the following data were obtained:
Mass (m) = 25 KgForce applied (Fₐ) = 135 NNet force (Fₙ) = 70 NFrictional force (Fբ) =?The frictional force acting on the box can be obtained as follow:
Fₙ = Fₐ – Fբ
70 = 135 – Fբ
Collect like terms
70 – 135 = – Fբ
–65 = –Fբ
Multiply through by –1
Fբ = 65 NThus, the frictional force of the box is 65 N
Learn more on Frictional force: https://brainly.com/question/25767576
The function of the liver in the metabolism of amino acids is to
Answer:
Produce energy, or make carbohydrates or fats.
Explanation:
A battery is connected in series with an ammeter and a variable resistor R.
When R= 6.0 ohms, the current in the ammeter is 1.0 A. When R= 3.0 ohms, the current is 1.5 A.
Calculate the internal resistance of the battery.
A. 6.0 ohms
B. 1.5 ohms
C. 4.5 ohms
D. 3.0 ohms
If you were to mix 10 grams of salt into 100 grams of water, how much will the total mass of the solution be?
Group of answer choices
90 grams
100 grams
110 grams
10 grams
110 grams
mass of salt + mass of water
10 + 100
110g
Answer:
110 grams
Explanation:
If you were to mix 7 grams of sugar into 100 grams of water, how much will the total mass of the solution be?
No mass was gained or lost, so the mass would be 107 grams.
100 grams
107 grams
93 grams
95 grams
No mass was gained or lost, so the mass would be 107 grams.
(For your problem it would be 10+ 100= 110g)
ONLY ANSWER IF YOU KNOW FOR SURE PLEASE :)
answer all three please, it should not take long
Answer:
Question one is b, Question two is b, and question three is b, im pretty positive that what it is
What is kinematics . Give two examples
Answer:
kinematics explains the terms like acceleration, velocity, and position of the objects while in motion.
Some important parameters in kinematics are displacement, velocity, and time.
Explanation:
your welcome,can you give me the brainliest? plssss
thank me if it was correct for you too.
Answer:
Definition of Kinematics :- Kinematics is the study of the motion of mechanical points, bodies and systems without consideration of their associated physical properties and the forces acting on them. ... An example model of bodies in a system is the gears in a vehicle's transmission.Example of kinematics :- The examples for kinematics are given below: -i) Moving train and bus. ii) Motion of a mass on inclined plane. iii) Running water in the river. iv) Falling water from a mountain peak.Explanation:
Hope this helps you dear ✌️Carry on learning !!A
person tries to lift each object with a force of 18 N, upward. Which
statement is supported by the data in the table?
A. Objects 1 and 2 will not move, and objects 3 and 4 will accelerate
upward.
B. None of the objects will move, but the normal force on all of the
objects will increase.
O C. All of the objects will move, and object 2 will accelerate upward
the fastest.
D. Objects 1 and 2 will move downward, and objects 3 and 4 will
move upward.
Answer: A. Objects 1 and 2 will not move, and objects 3 and 4 will accelerate upward.
Explanation:
Because objects 1 and 2 require more force in order to move, they will stay motionless.
Correct me if I am incorrect.
Need
Help answering the questions
Why are movie scenes in outer space often unrealistic?
Answer:
see explanation
Explanation:
by my calculations, i believe it may be because they have to pretend to be in space.
one of them is Space & Interstellar Travel
HELP ASAP WHOEVER ANSWERS FIRST WITH BE BRAINIEST PLEASE HELP!
The answer is : A₃ = A₁ - A₂ = 3.0 - 2.0 = 1.0A
Ok done. Thank to me :>
What is the control group
A control group in a scientific experiment is a group separated from the rest of the experiment, where the independent variable being tested cannot influence the results. This isolates the independent variable 's effects on the experiment and can help rule out alternative explanations of the experimental results.
Answer:
members of a control group receive a standard treatment, a placebo, or no treatment at all.
Explanation:
Which of the following elements is more reactive than the others
Answer:
Sulfur
Selenium
Nitrogen
Oxygen
Explanation:
Sulfur is the most reactive out of the four and Oxygen is the least reactive out of the four.
use these terms in to show they are related, radiant energy, solar collector, active solar heating system
Answer:
The term "solar collector" commonly refers to a device for solar hot water heating, but may refer to large power generating installations such as solar parabolic troughs and solar towers or non water heating devices such as solar air heaters. radiant energy is the energy of electromagnetic and gravitational radiation.Active solar heating systems use solar energy to heat a fluid;either liquid or air; and then transfer the solar heat directly to the interior space or to a storage system for later use. If the solar system cannot provide adequate space heating, an auxiliary or back-up system provides the additional heat.
How many protons are in C-14?
Answer:
56 proton sir
have a nice day
What do protoplanets eventually grow into?
Answer:
a planet
Explanation:
If planetesimals, objects that combined to form protoplanets, were to collide head on in the early solar nebula, they would shatter to the point where they would be unable to grow into a larger size, a protoplanet. A protoplanet is a massive object that will eventually become a planet.
Which two changes would decrease the electric force between two charged
particles?
- A. Decrease the charge of one of the particles.
B. Increase the charge of both particles.
C. Increase the charge of one of the particles.
D. Decrease the distance between the particles.
E. Increase the distance between the particles.
PLEASE HELP I KEEP FAILING!!!!
Answer:
it is b and e
Explanation:
if u look at the words twice you will notice that b and e are both saying the same meanings just in diff rent words way u need to look close on things like that and u will get passing gradesExplain the function and the difference between figure 1 and 2
Answer:
figure one (step up transformer) helps in increasing the output voltage
figure two (step down transformer) helps in decreasing the output voltage
True or false? Gas pressure is caused by molecules in a gas colliding with the walls of their container.
Answer:True
The number of molecules hitting the unit surface per unit time increasethe gas pressure increases.
In which scenario is work being done on an object?
a) A force is applied to an object to hold it at rest on an inclined plane.
b) Sitting on a box.
c) An upward force is applied to an object to move it upward at a constant speed.
d) An upward force is applied to an object to suspend it motionless in mid-air.
Answer:c
Explanation:
To solve this, we must know each and every concept related to work. Therefore, the correct option is option C that is "an upward force is applied to an object to move it upward at a constant speed."
What is work?Work in physics is the energy delivered to or out of an item by applying force across a displacement. It is frequently expressed in its most basic form as the combination of displacement and force.
When a force is applied, it is said to produce positive work if it has a portion in the directions of the movement of the site of application. Work is done on a body is equivalent to an increase in the body's energy, because work transmits energy to the body. If, on the other hand, the force acting is in the opposite direction as the item's motion, the work is regarded negative, suggesting that energy is withdrawn from the object.
Therefore, the correct option is option C that is "an upward force is applied to an object to move it upward at a constant speed."
To know more about work, here:
https://brainly.com/question/28727910
#SPJ2
Compare and contrast synthesis and decomposition reactions.
Answer:
Synthesis reactions are chemical reactions where two elements combine to make a product. Decomposition reactions are chemical reactions where a reactant produces another product, usually two, or even more. This is when the bonds in the compound are broken apart to make new compounds.
Explanation:
Determine the kinetic energy of a 625-kg roller coaster car that is moving with a speed of 10 m/s.
Hi there!
Kinetic energy can be calculated using the following:
[tex]\large\boxed{KE = \frac{1}{2}mv^2}}[/tex]
Where:
KE = Kinetic energy (J)
m = mass (kg)
v = velocity (m/s)
Plug in the given values:
[tex]KE = \frac{1}{2}(625)(10^2) = \boxed{31250J}[/tex]