Answers
Answer:
There are 6 Carbon dioxides, and 6 waters, but there are 6 carbons, 18 oxygens, and 12 hydrogens.
Explanation:
Answer:
6 carbon atoms
18 oxygen atoms
12 hydrogen atoms
Related Questions
When 435 J of heat is added to 3.4 g of olive oil that's at 21 Deg C, it's
temperature increases to 85 Deg C. Calculate the specific heat of Olive oil? Show work
Answers
Answer:
k Nishant
Explanation:
i don't know sorry but u can search in google
A tree frog uses plants or trees for protection from the rain. The frog is protected from the rain and the tree is neither helped nor harmed
Answers
what’s the most abundant isotope of lawrencium
Answers
Answer:
266Lr
Thirteen isotopes of lawrencium are currently known; the most stable is 266Lr with a half-life of 11 hours, but the shorter-lived 260Lr (half-life 2.7 minutes) is most commonly used in chemistry because it can be produced on a larger scale.
Explanation:
hopefully that helps you
Draw molecules that satisfy the following prompts:
1. All molecules must have a minimum of 12 Carbon atoms and exactly 3 heteroatoms (not carbon or hydrogen atoms).
2. You may not use the same molecule twice for any parts of this question.
4. You do not need to look up solubility information, but the answers must be reasonable (supported by the concepts that we have discussed). Also, the structures must be reasonable (improper structures, e.g. carbon with 5 bonds or oxygen with one bond and no charge, will not receive any credit).
a. Draw two non-charged molecules that will be separated once they are placed in a separatory funnel that contains 2.5 M HCl(aq) and dichloromethane.
b. Draw two non-charged molecules that will be separated once they are placed in a separatory funnel that contains 2.5 M NaOH(aq) and dichloromethane.
c. Draw two non-charged molecules that will be separated using neutral water and dichloromethane and in a separatory funnel.
Answers
Answer:
see images attached
Explanation:
Here we are trying to perform solvent extraction. In solvent extraction, there must be an aqueous phase and an organic phase.
One of the species to be separated is extracted in greater concentration in the aqueous phase while the other is extracted in greater concentration in the organic phase.
The phase into which each specie is extracted depends on the nature of the specie.
Two structures are shown in the images attached that will be separated by the methods shown in (a) (b) (c) in the question
__________ 5. Chemical equilibrium is the result of A. all of the reactants being converted into products. B. stoppage of further reaction. C. formation of products equal in mass to the mass of the reactants. D. opposing reactions attaining equal rates. E. a loss of pressure in the system.
Answers
Answer:
The correct option is C
Explanation:
Chemical equilibrium is a state in which there is no net change in the amount of reactant and products formed over time. This reaction is a reversible reaction, hence the reaction can keep proceeding in either direction until the products formed are equal in mass to that of the reactants or the products been reversed back to the reactants until both sides (product and reactant) achieve equal mass.
A student dissolves of sodium hydroxide in of water in a well-insulated open cup. He that observes the temperature of the water rise from to over the course of minutes. Use this data, and any information you need from the ALEKS Data resource,
NaOH(s) rightarrow Na+(aq) + OH-(aq)
You can make any reasonable assumptions about the physical properties of the solution. Note for advanced students: it's possible the student did not do the experiment carefully, and the values you calculate may not be the same as the known and published values for this reaction.
1. Is this reaction exothermic, endothermic, or neither.
2. If you said the reaction was exothermic or endothermic, calculate the amount of neat that was released or absorbed by the reaction in this case.
3. Calculate the reaction enthalpy AW per mole of NaOH.
Answers
Answer:
This question is incomplete
Explanation:
This question is incomplete but the answer to (1) and steps involved in calculating (2) and (3) will be discussed in the attachment
1. The reaction is an exothermic reaction because heat was given off. Exothermic reaction is a reaction in which heat is released from a reaction into the surroundings. And according to the question, the student observed that the temperature of the water increased during the course of the minutes.
Particle motion in ice is __________than partlice motion in water.
1. faster
2. slower
3. the same
Answers
Answer:
1. Faster
Explanation:
If 0.4743 moles of H2O are produced, how many grams of VOCl3 will also be produced?
(V2O5 + 6 HCl → 2 VOCl3 + 3 H2O)
Answers
Answer:
i hope this helps. sorry if it totally doesn't
How many F atoms are present in 3.16 moles of BaF2? show work
Answers
Answer:
3.80 × 10²⁴ atoms of F
Explanation:
Step 1: Given data
Moles of barium fluoride (BaF₂): 3.16 mol
Step 2: Calculate the moles of fluorine in 3.16 moles of barium fluoride
The molar ratio of BaF₂ to F is 1:2. The moles of F in 3.16 moles of BaF₂ are 2/1 × 3.16 mol = 6.32 mol.
Step 3: Calculate the atoms of F in 6.32 moles of F
We will use Avogadro's number: there are 6.02 × 10²³ atoms of F in 1 mole of atoms of F.
6.32 mol × (6.02 × 10²³ atom/1 mol) = 3.80 × 10²⁴ atom
____ KClO3 = ____ KCl + ____ O2
Answers
Answer:
2KCIO3=2KCI+3O2
Explanation:
1. equalize right side O with left side O- Right side we have 3 and left only 2 so we add 3 in front(on left side)(3*2=6 O on both sides)
2.we add 2 on right side so now we have 6 O on left and 6 O on right and 2KCI
3.Add 2 on right side KCI so on both sides we got 2 KCI
A black object appears black because it reflects all light , and does not absorb any light. True or False
Answers
Answer:
False
Explanation:
It is the other way round, a black object appears black because it absorbs all the wavelength of light and does not reflect any light.
A black bucket will appear black because, it absorbs all wavelength of light incident on it. No other wavelength is reflected from the surface of the body. A black color suggests that a body is not reflecting any color. Instead such a body absorbing all the colors. For a white object, they reflect all the wavelength that is incident upon them.3 points
18) A student determines the density of gold to be 20.9g/L. The true
density of gold is 19.30g/L. What is the student's percent error?round
answer to 2 significant figures *
Answers
Answer:
The answer is 8.29 %Explanation:
The percentage error of a certain measurement can be found by using the formula
[tex]P(\%) = \frac{error}{actual \: \: number} \times 100\% \\ [/tex]
From the question
actual density = 19.30g/L
error = 20.9 - 19.3 = 1.6
We have
[tex]p(\%) = \frac{1.6}{19.3} \times 100 \\ = 8.290155440...[/tex]
We have the final answer as
8.29 %Hope this helps you
Question 2 of 10 >
Nitrogen and hydrogen combine at a high temperature, in the presence of a catalyst, to produce ammonia,
8H8
N2(g) + 3 H2(g) — 2NH,(8)
Assume 0.170 mol N, and 0.561 mol H, are present initially,
After complete reaction, how many moles of ammonia are produced?
NH,
How many moles of H, remain?
Answers
Answer:
Moles of H₂ left = 0.051 mol
Moles of ammonia formed = 0.34 mol
Explanation:
Given data:
Moles of N₂ = 0.170 mol
Moles of H₂ = 0.561 mol
Moles of ammonia formed = ?
Moles of H₂ left = ?
Solution:
Balance chemical equation:
N₂ + 3H₂ → 2NH₃
Now we will compare the moles of ammonia with nitrogen because nitrogen is limiting reactant and limit the yield of ammonia.
N₂ : NH₃
1 : 2
0.170 : 2×0.170 = 0.34 mol
Moles of ammonia formed = 0.34 mol
Moles of H₂ reacted:
N₂ : H₂
1 : 3
0.170 : 3/1×0.170 = 0.51 mol
0.51 moles of hydrogen react with 0.170 moles of nitrogen.
Moles of H₂ left:
Moles of H₂ left = Total - moles reacted
Moles of H₂ left = 0.561 mol - 0.51 mol
Moles of H₂ left = 0.051 mol
Level 1 01 Which correctly pairs the outside particles with their charge? A. Electrons: Positive B. Protons: Positive C. Neutrons: Neutral D. Electrons: Negative
Answers
Answer:
D. Electrons: Negative.
Explanation:
Hello, happy to help you today!
In this case, by considering the Bohr's atomic model in which atom is composed by a nuclei containing both protons and neutrons which are positively and neutrally charged respectively and surrounding electrons assembled in orbits or levels of energy which are negatively charged in order to provide a balance to the atom, the correct statement is: D. Electrons: Negative. Also consider the Bohr's model on the attached picture.
My best regards to you!
Solid calcium chlorate decomposes to form solid calcium chloride and oxygen gas.
Write the balanced chemical equation for the reaction described. Phases are optional.
equation:
Answers
Answer:
Ca(ClO₃)₂(s) → CaCl₂(s) + 3O₂(g)
Explanation:
Chemical equation:
Ca(ClO₃)₂(s) → CaCl₂(s) + O₂(g)
Balance chemical equation:
Ca(ClO₃)₂(s) → CaCl₂(s) + 3O₂(g)
Step 1:
Ca(ClO₃)₂(s) → CaCl₂(s) + O₂(g)
Left hand side Right hand side
Ca = 1 Ca = 1
Cl = 2 Cl = 2
O = 6 O = 2
Step 2:
Ca(ClO₃)₂(s) → CaCl₂(s) + 3O₂(g)
Left hand side Right hand side
Ca = 1 Ca = 1
Cl = 2 Cl = 2
O = 6 O = 6
Each molecule of an olefin has at least:
a
one double bond
b
two double bonds
c
three double bonds
d
two or more single bonds
Answers
Answer:
a.
Explanation:
One double bond.
For example ethene CH2=CH2
What type of energy is defined as the kinetic energy of the atoms of a substance?
Answers
Explanation:Thermal energy, or heat, is the energy that comes from the movement of atoms and molecules in a substance. Heat increases when these particles move faster. Geothermal energy is the thermal energy in the earth. Motion energy is energy stored in the movement of objects.
I hope this helped!
As temperature decreases, what happens to particles in a material?
Particles become further apart / expand?
Particles become slippery / liquid?
Particles become closer together / contract?
Particles become sticky / plasma?
Answers
Answer:
Particles become closer together / contract?
Explanation:
as particles cool down in temp, the particles slow down and compress
5. What gases was produced from decomposing hydrogen peroxide? What non-gaseous product formed from the reaction
Answers
Answer:
H2O
Explanation:
The equation for the decomposition of hydrogen peroxide is shown below;
2H2O2(l)-----> 2H2O(l) + O2(g)
Hence, the decomposition of H2O2 yields oxygen gas and water. Water is a non gaseous product of the reaction as clearly seen in the equation above.
Calculate the mass (in g) of 2.60 x 10^23 molecules of PbSO 4. The molar mass of PbSO 4 is 303.27 g/mol.
Answers:
986 g
7.27 g
1.04 g
131 g
4.74 x 1049 g
Answers
Explanation:
djdjdjdjdjdjdudujeudbndy no su dinero eydjd
djdjdjdjdjdjdudujeudbndy no es el quedóhajqp venga usted decide si me para el lunes m
[14/10 12:55 p. m.] Vicky Acpo je je je
[14/10 1oppho q[15/10 8:15 a. m.]p t...
Plz answer me will mark as brainliest
Answers
Answer:
Compared to the walls of the right ventricle, the walls of the left ventricles are much thicker.
The plasma carries hormones, which are the body's chemical messengers.
Which is an example of a current research focus in chemistry?
A. applying gene therapy to treat certain diseases
B. using hook-and-loop tape in the clothing industry
C. developing smoke detectors for common use
D. studying coal combustion as an energy source
Answers
Answer:
b is the correct answer
do not trust answer one
Explanation:
If 1.02 g of nickel reacted with 750. mL of 0.112 M hydrobromic acid, how much of each will be present at the end of the reaction if you captured the gas in a 2.50 L vessel at 30 C
Answers
Answer:
35.1% is percent yield
Explanation:
Full question: Assume no volume change. If you formed 0.0910 atm of gas, what is the percent yield?
The reaction that is occurring is:
Ni + 3HBr → NiBr₃ + 3/2H₂(g)
First, we will determine moles of Ni and HBr to determine limiting reactant and theoretical yield
Using ideal gas law, we can determine the moles of hydrogen formed. Thus, we can find percent yield:
Moles Ni (Molar mass: 58.69g/mol):
1.02g * (1mol / 58.69g) = 0.01738moles Ni
Moles HBr:
0.750L * (0.112mol/L) = 0.084 moles of HBr.
For a complete reaction of the 0.084 moles of HBr you need:
0.084mol HBr * (1 mole Ni / 3 moles HBr) = 0.028 moles of Ni.
As there are just 0.01738 moles of Ni, the Ni is limiting reactant. Assuming a theoretical yield, moles of H₂ produced are:
0.01738moles Ni * (3/2 H₂ / 1 mol Ni) = 0.02607 moles H₂
Now, moles of H₂ produced are:
PV = nRT
PV/RT = n
Where P is pressure (0.0910atm)
V is volume (2.50L)
R is gas constant (0.082atmL/molK)
T is absolute temperature in Kelvin (30°C + 273.15 = 303.15K)
And n are moles
PV/RT = n
0.0910atm*2.50L/0.082atmL/molK*303.15K = n
0.00915 moles = n
And percent yield (Produced moles / Theoretical moles * 100) is:
0.00915 moles / 0.02607moles =
35.1% is percent yieldPhosphoric acid, which is commonly used as rust inhibitor, food additive and etching agent for dental and orthopedic use, can be synthesized using a two-step thermal process. In the first step, phosphorus and oxygen react to form diphosphorus pentoxide: P4(l)+5O2(g-2 P20s(g) In the second step, diphosphorus pentoxide and water react to form phosphoric acld P20(9)+3 H200 2H,PO40) Write the net chemical equation for the production of phosphoric acid from phosphorus, oxygen and water.
Answers
Answer:
P₄(l) + 5 O₂(g) + 6 H₂O(l) ⇒ 4 H₃PO₄(aq)
Explanation:
Phosphoric acid is synthesized using a two-step thermal process.
In the first step, phosphorus and oxygen react to form diphosphorus pentoxide. The corresponding chemical equation is:
P₄(l) + 5 O₂(g) ⇒ 2 P₂O₅(g)
In the second step, diphosphorus pentoxide and water react to form phosphoric acid. The corresponding chemical equation is:
P₂O₅(g) + 3 H₂O(l) ⇒ 2 H₃PO₄(aq)
We can get the net chemical equation by adding the first step, the second step multiplied by 2, and canceling what is repeated on both sides.
P₄(l) + 5 O₂(g) + 2 P₂O₅(g) + 6 H₂O(l) ⇒ 2 P₂O₅(g) + 4 H₃PO₄(aq)
P₄(l) + 5 O₂(g) + 6 H₂O(l) ⇒ 4 H₃PO₄(aq)
6. Clownfish, sea anemone, coral, sea urchins, sponges and parrot fish are 5 points
just a few examples of the large variety of organisms that can be found in
a coral reef. The coral reef and its inhabitants (residents) are suffering due
to several factors such as pollution, coastal development, sedimentation
and destructive fishing practices. What would be the most likely result if
some of the species in the coral reef are destroyed? *
Answers
Answer:
The orange-and-white clownfish you know from Hollywood is only one of 30 species of clownfish that live in coral reefs around the world; small in size and big in personality, these tiny comedians have one of the most unique lifestyles in the reef. The orange-and-white clownfish you know from Hollywood is only one of 30 species of clownfish that live in coral reefs around the world; small in size and big in personality, these tiny comedians have one of the most unique lifestyles in the reef.
Explanation:
point being, it would be absolutely terrible
Coral reef are the biggest biodiversity in the world. Therefore, destruction of coral reefs definitely affect the aquatic livings. As well as it leads to erosion of seashore lines.
What are coral reefs?Corals reefs are the habitat of 25% of sea organisms. It means there are well over a million species that rely on coral reefs for their existence. The reef offers these organisms the vital food, habitat, and breeding grounds required for the survival of their species.
The marine biodiversity would suffer greatly if their homes vanished. And many fish, turtles, and other species would vanish in a domino-like fashion.
Coral reefs are threatened by a number of things, such as local threats like overfishing, destructive fishing methods, coastal development, pollution, and careless tourism, as well as global effects of climate change like warming seas and rising CO₂ levels in the water. Natural phenomena like hurricanes, El Nio, and diseases are also a threat to oral reefs.
Find more on coral reefs:
https://brainly.com/question/364711
#SPJ6
These are two metamorphic rocks.
Left: red and white rock with rounded grains and coarse texture. Right: flat, gray rock composed of thin layers.
Which statement about the rocks is accurate?
The rock on the right is foliated.
The rock on the left formed from granite.
The rock on the left is formed from cooled magma.
The rock on the right has randomly arranged grains.
Answers
Answer:
A. the rock on the right is foliated
Explanation:
because if you look at the image then you see that the rock is arranged in layers so you can see that it is a foliated rock and also I got it right on my quiz
HOPE IT HELPS!!!
a water sample is found to have a cl- content of 100ppm as nacl what is the concentration of chloride in moles per liter
Answers
Answer:
The concentration of chloride ion is [tex]2.82\times10^{-3}\;mol/L[/tex]
Explanation:
We know that 1 ppm is equal to 1 mg/L.
So, the [tex]Cl^-[/tex] content 100 ppm suggests the presence of 100 mg of [tex]Cl^-[/tex] in 1 L of solution.
The molar mass of [tex]Cl^-[/tex] is equal to the molar mass of Cl atom as the mass of the excess electron in [tex]Cl^-[/tex] is negligible as compared to the mass of Cl atom.
So, the molar mass of [tex]Cl^-[/tex] is 35.453 g/mol.
Number of moles = (Mass)/(Molar mass)
Hence, the number of moles (N) of [tex]Cl^-[/tex] present in 100 mg (0.100 g) of [tex]Cl^-[/tex] is calculated as shown below:
[tex]N=\frac{0.100\;g}{35.453\;g/mol}=2.82\times 10^{-3}\;mol[/tex]
So, there is [tex]2.82\times10^{-3}\;mol[/tex] of [tex]Cl^-[/tex] present in 1 L of solution.
In the acid-base mechanism, the base is a proton acceptor, and the acid is the proton donor. An acid-base reaction is visualized as the reaction in which proton transfer takes place. However, in a nucleophilic substitution reaction, the nucleophile attacks a substrate (usually an electrophile), and the leaving group is removed from the substrate as a weaker nucleophile. The nature of the reactants determines whether a reaction will proceed as an acid-base reaction or a nucleophilic substitution reaction. Classify each reaction as a nucleophilic substitution reaction or an acid-base reaction.
a. CH3CH2O-+CH3Br → CH3CH2OCH3+Br-
b. CH3CH2OH+HCl → CH3CH2Cl+H2O
c. CH3COOH+NaOH → CH3COONa +H2O
d. CH3CH2CH2Br+HCN→CH3CH2CH2CN+HBr
e. CH3CH2OH+KOH→CH3CH2OK +H2O
Answers
Answer:
a) nucleophilic
b) Acid-base
c) Acid- base
d) nucleophilic
e) Acid-base
Explanation:
A nucleophilic reaction is one in which a nucleophile attacks a substrate and a leaving group departs from the substrate.
Reactions (a) and (d) are nucleophilic reactions since the Br- is the leaving group in the both reactions.
Reactions (b) (c) and (e) are acid-base reactions since they involve salt and water as products.
4. CHALLENGE Suppose you had a mixture of sand and small,
hollow beads. How might you separate the mixture?
Answers
I'm not sure if this is the answer but maybe oil.
Discuss the relationship between atoms, elements and compounds. Include in your discussion if these are mixtures or pure substances and why.
Answers
Answer:
Elements are the simplest complete chemical substances. Each element corresponds to a single entry on the periodic table. An element is a material that consists of a single type of atom. Each atom type contains the same number of protons.
Chemical bonds link elements together to form more complex molecules called compounds. A compound consists of two or more types of elements held together by covalent or ionic bonds.
Explanation: