Answer:
1.Appearing Disinterested
2.Answering a Call or Texting
3.Dressing Inappropriately
4.Talking Negatively About a Current or Previous Employer
5.Body Language
6.Being Vague
Explanation:
Hope this helps !
Poor interview preparation is a clear killer, and 75% of interviews end in failure because the applicant wasn't prepared for some of the questions asked or didn't know enough about the employer.
What are mistakes that can be made during an interview ?Failing to conduct research The biggest error all of our experts mentioned was showing up unprepared for an interview. This could be not doing your homework on the business, not giving the job enough consideration, or not knowing who you're meeting. However, it could also refer to not having a plan for your conversation.
Most applicants anticipate being questioned. When one person asks every question and the other person responds, an interrogation has taken place. In an interview, questions are posed and answered in the context of a business dialogue. applicants who anticipate unwilling interrogator.
Lack of planning. Some recruiting managers favour conducting interviews in a more "spontaneous" manner.
becoming very anxious.acting too carelessly.being very zealous.intimidating potential employees.Lying. accepting bias.Learn more about Interveiw here
https://brainly.com/question/12600494
#SPJ2
Tom and Betsy, who are married filing jointly, reported a standard deduction of $24,000 on their 2018 tax return. They paid $500 to the state for income taxes in 2018. In 2019, they received a $125 refund of state taxes paid in 2018. What is the amount that Tom and Betsy need to report on their 2019 tax return?
Answer:
$0
Explanation:
Since Tom and Betsy didn't itemize their deductions in 2018 (they chose the standard deduction), they didn't include the state taxes in their tax filing. Since the state taxes were not used by Tom and Betsy to reduce their federal income taxes, then any refund will not be included in their current income. Only if state taxes are used to lower federal taxes, do taxpayers need to include any refund.
Financial Assertions and Audit Objectives. You are engaged to examine the financial statements of Spillane Company for the year ended December 31. Assume that on November 1, Spillane borrowed $500,000 from Second National Bank to finance plant expansion. The long-term note agreement provided for the annual payment of principal and interest over five years. The existing plant was pledged as security for the loan. Due to the unexpected difficulties in acquiring the building site, the plant expansion did not begin on time. To use the borrowed funds, management decided to invest in stocks and bonds and on November 16, invested the $500,000 in publicly traded securities
Required:
Develop specific assertions (audit objectives) related to securities (assets) based on management’s five (PCAOB) general assertions.
Answer:
Assertion 1) Existence or occurrence: the company must provide the loan documents along with proof that they actually purchased the stocks and bonds using the loan money. It would also help to have a document explaining why the building site couldn't be acquired as planned.
Assertion 2) Rights and obligations: all the legal paperwork regarding the loan, the mortgage on the existing plant and the stocks and bond paperwork must be presented.
Assertion 3) Completeness: all the relevant information must be readily available including building titles, inventories, equipment, cash receipts, etc. The auditor should be allowed to physically visit the plant and confirm the documents.
Assertion 4) Valuation and allocation: information regarding the current market values of the building, inventories and equipment should be given. The auditor should be able to confirm if the depreciation values and market values are consistent. Also, the auditor must have access to accounts receivables and should be able to analyze them to check for any inconsistencies.
Assertion 5) Presentation and disclosure: the auditor should be able to check expense accounts and capitalization accounts, and analyze them. E.g. equipment or machinery repairs must be treated as expenses and not capitalized.
Which of the following influences what you choose to wear
Your activities
All of the Above
Basic needs
Your personal preferences
Answer:
all of the above dnnxndncnvhhdbdbdbd
What was the first chess champion
Answer:
Wilhelm Steinitz
Explanation:
Answer:
Wilhelm Steinitz
Explanation:
in 1886 he took place the first officially recognized World Chess Championship. So in the year of 1886 he was proclaimed as the first World Chess Champion. The final result was 10 victories for Steinitz, 5 for Zukertort and 5 draws
For Coppertone products, evaluations in the postpurchase behavior stage of the consumer purchase decision process that are most likely to cause dissatisfaction are
Answer:
dry skin and acne
Explanation:
Coppertone is an American brand name of a sunscreen. This brand is headquartered in Whippany, New Jersey. Coppertone the Coppertone girl logo and a different kind of fragrance.
For Coppertone products, evaluations in the post purchase behavior stage of the consumer purchase decision process that are most likely to cause dissatisfaction are dry skin and acne.
Hussein got a call yesterday from First Bank, the company that issued his credit card inquiring about an $105.00 charge made in Buenos Aires, Argentina. Upon learning that Hussein was in Detroit and had not made this purchase, the bank quickly took steps to cancel the card and issue a new one. Given the circumstances that Hussein's credit card number had an illegal transaction, he may also want to:____________.
A) check his computer's firewall to make sure it's working.
B) cancel his account and eliminate credit cards from his life.
C) change his passwords and store them in a password manager.
D) diversify his spending habits by using one of several credit cards when making purchases.
Answer:
C) change his passwords and store them in a password manager.
Explanation:
Hussein, being a victim of cyber theft of money from his bank account, after having informed bank about the fraudulent transaction, should :-
Take further precautionary measures for modifying & safely saving other related crucial information, like passwords. So, he should change his passwords and store them in a password manager.
Which of the following is a key role that a human resource manager can play in a company?
A. Public Relations officer
B. Marking Analyst
C. Training specialist
D. Sales supervisor
Answer:
c training specialist
A company reports accounting data in its financial statements. This data is used for financial analyses that provide insights into a company’s strengths, weaknesses, performance in specific areas, and trends in performance. These analyses are often used to compare a company’s performance to that of its competitors, or to its past or expected future performance. Such insight helps managers and analysts improve their decision making. Most decision makers and analysts use five groups of ratios to examine the different aspects of a company’s performance. Indicate whether each of the following statements regarding financial ratios are true or false?
a. The ratios provide an accurate and thorough representation of the Chinese company’s performance.b. The analysis likely includes incorrect and misleading conclusions.
Answer:
a. False
b. True
Explanation:
Ratio analysis is a very useful method of analyzing a company however it is not necessarily very in-depth. If a company seems to be performing below the industrial average, it would be prudent to check the reasons why the company is doing so.
The advantage of ratio analysis in this instance is that it would help point you in the right direction to know what accounts to analyze more intensely to find out why the Chinese company is not performing up to standard.
Ratio analysis are good but they do not always provide an accurate and thorough representation of a company’s performance therefore relying solely on ratios will lead to an analysis that likely includes incorrect and misleading conclusions.
The following data pertain to the Oneida Restaurant Supply Company for the year just ended.
Budgeted sales revenue $205,000
Actual manufacturing overhead 336,000
Budgeted machine hours (based on practical capacity) 8,000
Budgeted direct-labor hours (based on practical capacity) 20,000
Budgeted direct-labor rate $14
Budgeted manufacturing overhead $364,000
Actual machine hours 11,000
Actual direct-labor hours 18,000
Actual direct-labor rate $15
Required:
a. Compute the firm's predetermined overhead rate for the year using each of the following common cost drivers: (a) machine hours, (b) direct-labor hours, and (c) direct-labor dollars.
b. Calculate the over-applied or under-applied overhead for the year using each of the cost drivers listed above.
Answer:
Predetermined overhead rate = Budgeted manufacturing rate/Allocation base
a. Machine hours
= 364,000 / 8,000
= $45.5
Predetermined overhead rate = $45.5
Direct-labor hours
= 364,000 / 20,000
= $18.2
Predetermined overhead rate = $18.2
Direct-labor dollars
Budgeted labor hours = 20,000 * $14 = $280,000
Predetermined overhead rate = 364,000 / $280,000 = $1.3
b. Machine hours
Manufacturing overhead applied = Actual machine hours * Predetermined overhead rate = $45.5 * 11,000 = $500,500
Over/Under applied overhead = 336,000 - 500,500
Over-applied overhead = $164,500
Direct-labor hours
Manufacturing overhead applied = Actual direct-labor hours * Predetermined overhead rate = $18.2 * 18,000 = $327,600
Over/Under applied overhead = 336,000 - 327,600
Under-applied overhead = $8400
Direct-labor dollars
Manufacturing overhead applied = Actual direct-labor hours * Actual direct-labor rate * Predetermined overhead rate
Manufacturing overhead applied = 18,000 * $15 * $1.3 = 351,000
Over/Under applied overhead = 336,000 - 351,000
Over-applied overhead = $15,000
we know that
Predetermined overhead rate = Budgeted manufacturing rate ÷ Allocation base
a. Machine hours
= 364,000 ÷8,000
= $45.5
Predetermined overhead rate = $45.5
Direct-labor hours
= 364,000 ÷ 20,000
= $18.2
Predetermined overhead rate = $18.2
Direct-labor dollars
Budgeted labor hours = 20,000 × $14 = $280,000
Predetermined overhead rate = 364,000 ÷ $280,000 = $1.3
b. Machine hours
Manufacturing overhead applied = Actual machine hours × Predetermined overhead rate
= $45.5 × 11,000
= $500,500
So,
Over/Under applied overhead = 336,000 - 500,500
Over-applied overhead = $164,500
Direct-labor hours
Manufacturing overhead applied = Actual direct-labor hours × Predetermined overhead rate
= $18.2 × 18,000
= $327,600
Over/Under applied overhead = 336,000 - 327,600
Under-applied overhead = $8400
Direct-labor dollars
Manufacturing overhead applied = Actual direct-labor hours × Actual direct-labor rate × Predetermined overhead rate
= 18,000 × $15 × $1.3
= 351,000
Over/Under applied overhead = 336,000 - 351,000
Over-applied overhead = $15,000
Learn more: https://brainly.com/question/994316?referrer=searchResults
Sparky Corporation uses the weighted-average method of process costing. The following information is available for February in its Molding Department:
Units:
Beginning Inventory: 30,000 units, 100% complete as to materials and 55% complete as to conversion.
Units started and completed: 120,000.
Units completed and transferred out: 150,000.
Ending Inventory: 32,500 units, 100% complete as to materials and 30% complete as to conversion.
Costs:
Costs in beginning Work in Process - Direct Materials: $48,000.
Costs in beginning Work in Process - Conversion: $53,850.
Costs incurred in February - Direct Materials: $328,050.
Costs incurred in February - Conversion: $604,150.
Required:
Calculate the cost per equivalent unit of materials.
Answer:
Cost per equivalent unit of material = $2.06
Explanation:
Total cost of material= Cost of material in beginning WIP + Cost of material incurred in February
= $48,000 + $328,050
= $376,050
Equivalent units = Number of units completed and transferred+ Ending inventory
= 150,000 units + 32,500 units
= 182,500 units
Cost per equivalent unit of material = Total cost of direct material / Equivalent units
= $376,050 / 182,500 units
= $2.06
Amy and Mitchell share equally in the profits, losses, and capital of the accrual basis AM Products LLC. The LLC does not need to report financial information to any third parties, so capital accounts are determined using tax rules (rather than GAAP). Amy is a managing member of the LLC (treated as a general partner) and is a U.S. person. At the beginning of the current tax year, Amy's capital account has a balance of $960,000, and the LLC has debts of $624,000 payable to unrelated parties. The debts are recourse to the LLC, but neither of the LLC members has personally guaranteed them. Assume that all LLC debt is shared equally between the partners. The following information about AM's operations for the current year is obtained from the LLC's records.
Ordinary income $900,000
W-2 wages to employees 200,000
Depreciation expense 300,000
Interest income from bond 4,000
Long-term capital loss 6,000
Short-term capital gain 12,000
Charitable contribution 4,000
Cash distribution to Amy 20,000
Unadjusted basis of partnership depreciable property 1,600,000
Year-end LLC debt payable to unrelated parties is $140,000.
Required:
What income, gains, losses, and deductions does Amy report on her income tax return?
Answer: See explanation
Explanation:
Share of ordinary income:
= (Ordinary income - Wages - Depreciation)/2
= (900,000 - 200,000 - 300,000)/2
= 400,000/2
= 200,000
Share of net short term capital gain
= (12,000 - 6,000) × 50%
= 6,000 × 0.5
= 3,000
Share of interest income
= 4000 × 50%
= 4000 × 0.5
= 2000
Share of charitable contribution deduction
= 4000 × 50%
= 4000 × 0.5
= 2000
You have just been hired as a financial analyst for Barrington Industries. Unfortunately, company headquarters (where all of the firm's records are kept) has been destroyed by fire. So, your first job will be to recreate the firm's cash flow statement for the year just ended. The firm had $100,000 in the bank at the end of the prior year, and its working capital accounts except cash remained constant during the year. It earned $5 million in net income during the year but paid $750,000 in dividends to common shareholders. Throughout the year, the firm purchased $5.4 million of machinery that was needed for a new project. You have just spoken to the firm's accountants and learned that annual depreciation expense for the year is $450,000; however, the purchase price for the machinery represents additions to property, plant, and equipment before depreciation. Finally, you have determined that the only financing done by the firm was to issue long-term debt of $1 million at a 5% interest rate. The data has been collected in the Microsoft Excel Online file below. Open the spreadsheet and perform the required analysis to answer the question below.
What was the firm's end-of-year cash balance? Recreate the firm's cash flow statement to arrive at your answer. Write out your answer completely. For example, 5 million should be entered as 5,000,000. Round your answer to the nearest dollar, if necessary.
Answer:
200,000
Explanation:
A cash flow statement is a financial statement that summarizes the amount of cash and cash equivalents entering and leaving a company. The cash flow statement measures how well a company manages its cash position, meaning how well the company generates cash to pay its debt obligations and fund its operating expenses.
Cash flow from operating activities
Net Income 5,000,000
Less Depreciation (450,000)
Cashflow from operations 5,450,000
Cash flow from investing activities
Purchase of Fixed assets 5,400,,000
Cash flow from investing activities
Issue of long term debt 1,000,000
Dividend paid (750,000)
Cash generated from investing activities 250,000
Change in cash 300,000
Beginning balance 100,000
Closing balance 200,000
Kim is trying to decide whether she can afford a loan she needs in order to go to chiropractic school. Right now Kim is living at home and works in a shoe store, earning a gross income of $1,760 per month. Her employer deducts $199 for taxes from her monthly pay. Kim also pays $189 on several credit card debts each month. The loan she needs for chiropractic school will cost an additional $172 per month. Help Kim make her decision by calculating her debt payments-to-income ratio with and without the college loan.
Required:
a. Carl’s house payment is $1,640 per month and his car payment is $482 per month. If Carl's take-home pay is $3,250 per month, what percentage does Carl spend on his home and car?
b. Suppose that your monthly net income is $2,850. Your monthly debt payments include your student loan payment and a gas credit card. They total $1,140. What is your debt payments-to-income ratio?
Answer:
1. Kim:
Debt payments-to-income ratio with the college loan
= 23%
2. Carl:
Percentage spent on home and car
= 65.3%
3. Debt payment to income ratio
= 40%
Explanation:
Kim's Data and Calculations:
Gross income = $1,760
Income taxes -199
After Tax Income $1,561 per month
Credit card debts = $189 per month
School loan = $172 per month
Total Debt payments = $361
Debt payments-to-income ratio with the college loan
= $361/$1,561 = 23%
Carl:
House payment = $1,640
Car payment = $482
Total payments = $2,122
Take-home pay = $3,250
Percentage spent on home and car = 65.3% ($2,122/$3,250 * 100)
3. My monthly net income = $2,850
Monthly debt payments = $1,140
Debt payment to income ratio
= $1,140/$2,850 * 100
= 0.4
= 40%
If there is a technological advance that lowers the cost of producing x-ray machines, then we can say that the
Answer:
C) quantity supplied of those machines will go up.
Explanation:
the options are missing:
A ) quantity demanded for those machines will increase.
B) demand for those machines will shift right.
C) quantity supplied of those machines will go up.
D) quantity supplied of those machines will decrease.
If production costs decrease, the supply curve will shift to the right, increasing the total quantity supplied while decreasing the sales price. Advances in technology increase productivity, which allows companies to supply a higher amount of goods at lower prices, which in turn increases the total quantity demanded for these goods.
You are considering starting a company that manufactures racing bicycles. You are planning on financing your firm 40% equity and 60% debt. You estimate that your upfront costs will be $5M, and that you will earn an EBIT of $1M per year for the next 12 years. Lightning Bolt Bikes makes racing bicycles similar to the ones that you wish to manufacture. They have a CAPM equity beta of 1.9 and a debt to equity ratio of 0.7. The tax rate for both firms is 35%, the riskless rate is 3%, and the expected return on the S&P500 is 15%. Cost of Debt is 6%
Part A (5 points). What is the asset beta of Lightning Bolt Bikes?
Part B (5 points). What is your unlevered cost of equity?
Part C (5 points). What is your firm’s equity beta?
Part D (10 points). What is your firm’s weighted average cost of capital?
Part E (5 points). What is the NPV of your proposed bicycle company using the WACC method?
Answer and Explanation:
1. Asset beta measures company's risk or volatility of return in assets without the effect of leverage financing or debt.
Asset beta= Equity beta / 1+(1-tax rate) *debt / equity
2. Unlevered cost of equity measures the returns on assets without the effect of debt
Unlevered cost of equity = Risk free return + Asset Beta * (Expected market return - Risk free return)
3. Equity beta measures security prices' volatility to change in the market
4. Weighted average cost of capital is the weighted average cost or average cost of all capital sources employed by the company in financing it's assets
Weighted Average cost of capital = Cost of Equity * proportion of equity + Cost of debt after tax rate * proportion of debt
Expected return in CAPM= Risk free return +asset beta *market return -risk free return
During the first month of operations ended August 31, Kodiak Fridgeration Company manufactured 48,000 mini refrigerators, of which 44,000 were sold. Operating data for the month are summarized as follows:
1 Sales $8,800,000.00
2 Manufacturing costs:
3 Direct materials $3,360,000.00
4 Direct labor 1,344,000.00
5 Variable manufacturing cost 816,000.00
6 Fixed manufacturing cost 528,000.00 6,048,000.00 7
Selling and administrative expenses:
8 Variable $528,000.00
9 Fixed 352,000.00 880,000.00
Required:
a. Prepare an income statement based on the absorption costing concept.
b. Prepare an income statement based on the variable costing concept.
c. Explain the reason for the difference in the amount of income from operations reported in (1) and (2).
Answer:
Part a.
Income statement based on the absorption costing concept.
Sales $8,800,000.00
Less Cost of Sales
Beginning Inventory $0
Add Manufacturing Cost $6,048,000.00
Less Ending Inventory ($504,000.00) ($5,544,000.00)
Gross Profit $3,256,000.00
Less Expenses :
Selling and administrative expenses:
Variable $528,000.00
Fixed $352,000.00 ($880,000.00)
Net Income/(loss) $2,376,000.00
Part b.
Income statement based on the variable costing concept.
Sales $8,800,000.00
Less Cost of Sales
Beginning Inventory $0
Add Manufacturing Cost $5,520,000.00
Less Ending Inventory ($460,000.00) ($5,060,000.00)
Contribution $3,740,000.00
Less Expenses :
Fixed manufacturing cost $528,000.00
Selling and administrative expenses:
Variable $528,000.00
Fixed $352,000.00 ($1,408,000.00)
Net Income/(loss) $2,332,000.00
Part c.
Reason : Fixed Costs deferred in Ending Inventory in Absorption Costing has resulted in a higher Income.
Explanation:
Units in Ending Inventory Calculation :
Production 48,000
Less Sales (44,000)
Ending Inventory 4,000
Absorption Costing Calcs
Variable Manufacturing Costs
Direct materials $3,360,000.00
Direct labor $1,344,000.00
Variable manufacturing cost $816,000.00
Fixed manufacturing cost $528,000.00
Total $6,048,000.00
Ending Inventory = $6,048,000.00 × 4,000 / 48,000
= $504,000
Variable Costing Calcs
Variable Manufacturing Costs
Direct materials $3,360,000.00
Direct labor $1,344,000.00
Variable manufacturing cost $816,000.00
Total $5,520,000.00
Ending Inventory = $5,520,000.00 × 4,000 / 48,000
= $460,000
Pooling has been used for a long time by businesses as a way to reduce risk. Imagine that years ago a small paint factory employed 200 people, each with an annual salary of $600/year. The factory owner knew from experience that 4 percent of workers were being injured each year, becoming unable to work. The factory owner decided to set up a fund to pay injured workers three months of salary to help their families and build good will with employees. The owner did not contribute to the injury fund. The workers themselves contributed a fixed amount each year to fund the plan. Answer the following questions (1 point each):_____.
1. How much did the owner need to collect from employees in total to fully fund the plan each year?
2. How much did each employee have to contribute each year to fully fund the plan?
3. What percentage of salary did each employee contribute to have an injury fund like this?
Answer:
1. Amount required to fund the plan = % of injured*Total employees* Annual salary
Amount required to fund the plan = 4%*200 people* $600
Amount required to fund the plan = $4800
2. Amount contributed by each employee = Amount required to fund the plan / Number of employees
Amount contributed by each employee = $4800/200
Amount contributed by each employee = $24
3. Percentage of salary = Amount contributed by each employee / Salary
Percentage of salary = 24/600
Percentage of salary = 0.04
Percentage of salary = 4%
Two carmakers have developed a strange but successful partnership. Ford, a U.S. automaker,and Mazda, an Asian carmaker, have collaborated on several models, including the Explorer, the Probe, the Mazda 323, and the Mazda MX-6. The U.S. automaker has supplied Mazda with help in marketing, finance, and styling. In return, Mazda has provided manufacturing and product development expertise to Ford. Both companies have worked together toward a common goal and both have benefited as a result of theirA. strategic alliance.B. international contract.C. free trade agreement.D. collaborative treaty.E. global oligopoly.
Answer:
A. strategic alliance
Explanation:
A strategic alliance refers to an agreement that is made between the two companies to work for accomplishing a common objective also in this the independence is there for working. It is less difficult and less binding as compared with the joint venture
Therefore in the given situation, it represents upon the strategic alliance and the same is to be considered
hence, the correct option is A.
The transactions listed below are typical of those involving Amalgamated Textiles and American Fashions. Amalgamated is a wholesale merchandiser and American Fashions is a retail merchandiser. Assume all sales of merchandise from Amalgamated to American Fashions are made with terms n/60, and the two companies use perpetual inventory systems. Assume the following transactions between the two companies occurred in the order listed during the year ended December 31.
Amalgamated sold merchandise to American Fashions at a selling price of $230,000. The merchandise had cost Amalgamated $175,000. Two days later, American Fashions returned goods that had been sold to the company at a price of $20,000 and complained to Amalgamated that some of the remaining merchandise differed from what American Fashions had ordered. Amalgamated agreed to give an allowance of $5,000 to American Fashions. The goods returned by American Fashions had cost Amalgamated $15,270. Just three days later, American Fashions paid Amalgamated, which settled all amounts owed.
Required:
a. Indicate the effect (direction and amount) of each transaction on the Inventory balance of Readers' Corner.
b. Prepare the journal entries that Readers’ Corner would record and show any computations.
Answer:
Transaction Sales Sales Sales Net Cost of Gross
Revenues returns allowances sales goods sold profit
a. $230,000 230,000 175,000 55,000
b. 20,000 5,000 -25,000 15,270 9,730
c. - - - - - No effect
S/n General Journal Debit$ Credit$
a(1) Accounts receivable 230,000
Sales revenues 230,000
(Sales on account to American Fashions)
a(2) Cost of goods sold 175,000
Inventory 175,000
(Recorded cost of goods sold)
b(1) Sales allowances and returns 25,000
(20000+5000)
Accounts receivable 25,000
(Sales allowances and returns granted)
b(2) Inventory 15,270
Cost of goods sold 15,270
(Cost of goods sold on goods returned)
c Cash 205,000
(230,000-25,000)
Accounts receivable 205,000
1. Calculate the sales commission per unit sold. If required, round your answers to the nearest dollar. Use rounded answers in subsequent computations.
Answer: $20
Explanation:
The sales commission is 6% and the selling price per unit is $340.
The Sales commission per unit saved therefore is;
= 340 * 6%
= $20.40
= $20
The partnership of Angel Investor Associates began operations on January 1, 20Y5, with contributions from two partners as follows:
Dennis Overton $180,000
Ben Testerman 120,000
The following additional partner transactions took place during the year:
1. In early January, Randy Campbell is admitted to the partnership by contributing $75,000 cash for a 20% interest.
2. Net income of $150,000 was earned in 20Y5. In addition, Dennis Overton received a salary allowance of $40,000 for the year. The three partners agree to an income-sharing ratio equal to their capital balances after admitting Campbell.
3. The partners' withdrawals are equal to half of the increase in their capital balances from salary allowance and income.
Required:
Prepare a statement of partnership equity for the year ended December 31, 20Y5.
Answer:
450000
Explanation:
The statement of partners' capital shows the changes in each partner's capital account for the year or period being reported on. It has the same format as the statement of owner's equity except that it includes a column for each partner and a total column for the company rather than just one column. The statement starts with the beginning capital balance, followed by the amounts of investments made, the share of net income or loss, and withdrawals made during the reporting period to determine the capital balance at the end of the period.
Dennis Ben Randy Total capital
Balance jan1,20Y5 180,000 120,000 - 300,000
Admission of randy - - 75000 75000
Salary Allowance 40000 - - 40000
Remaining income 52800 35200 22000 110,000
Partners withdrawals (46400) (17600) (11000) (75000 )
Balance Dec 31,2015 226400 137600 86000 450000
Sunset Products manufactures skateboards. The following transactions occurred in March. Purchased $24,500 of materials on account. Issued $1,450 of supplies from the materials inventory. Purchased $25,900 of materials on account. Paid for the materials purchased in transaction (1) using cash. Issued $30,900 in direct materials to the production department. Incurred direct labor costs of $29,500, which were credited to Wages Payable. Paid $22,400 cash for utilities, power, equipment maintenance, and other miscellaneous items for the manufacturing shop. Applied overhead on the basis of 120 percent of direct labor costs. Recognized depreciation on manufacturing property, plant, and equipment of $5,900.
The following balances appeared in the accounts of Sunset Products for March:
Beginning Ending
Materials Inventory $ 13,500 ?
Work-in-Process Inventory 24,750 ?
Finished Goods Inventory 97,500 $ 54,750
Cost of Goods Sold 120,000
Required:
a. Prepare journal entries to record the transactions. (If o entry is required for a transaction/event, select "No journal entry required" in the first account field.)
Transactions General Journal Debit Credit
1.
2.
3.
4.
5.
6.
7.
8.
9.
b. Prepare T-accounts to show the flow of costs during the period from Materials Inventory through Cost of Goods Sold.
Materials Inventory
Beg. bal. ___________ ____________
______ ___________ ____________ ______
______ ___________ ____________ ______
______ ___________ ____________ ______
End. bal. ___________ ____________ ______
Work in Progress Inventory
Beg. bal. ___________ ____________
______ ___________ ____________ ______
______ ___________ ____________ ______
______ ___________ ____________ ______
______ ___________ ____________ ______
End. bal. ___________ ____________ ______
Manufacturing Overhead Control
Beg. bal. ___________ ____________
______ ___________ ____________ ______
______ ___________ ____________ ______
______ ___________ ____________ ______
______ ___________ ____________ ______
End. bal. ___________ ____________ ______
Applied Manufacturing Overhead
Beg. bal. ___________ ____________
______ ___________ ____________ ______
______ ___________ ____________ ______
End. bal. ___________ ____________ ______
Accounts Payable
Beg. bal. ___________ ____________
______ ___________ ____________ ______
______ ___________ ____________ ______
______ ___________ ____________ ______
End. bal. ___________ ____________ ______
Cash
Beg. bal. ___________ ____________
______ ___________ ____________ ______
______ ___________ ____________ ______
______ ___________ ____________ ______
End. bal. ___________ ____________ ______
Wages Payable
Beg. bal. ___________ ____________
______ ___________ ____________ ______
______ ___________ ____________ ______
End. bal. ___________ ____________ ______
Accumulated Depreciation-Property, Plant, and Equipment
Beg. bal. ___________ ____________
______ ___________ ____________ ______
______ ___________ ____________ ______
End. bal. ___________ ____________ ______
Finished Goods Inventory
Beg. bal. ___________ ____________
Goods Completed ___________ ____________ Transfer to Cost of Goods Sold
End. bal. ___________ ____________
Cost of Goods Sold
Beg. bal. ___________ ____________
Finished Goods Inventory ___________ ____________
End. bal. ___________ ____________
Answer:
Sunset Products
a) Journal Entries:
Transactions General Journal Debit Credit
Materials Inventory $24,500
Accounts Payable $24,500
To record the purchase of materials on account.
Manufacturing Overhead $1,450
Materials Inventory $1,450
To record the issue of supplies.
Materials Inventory $25,900
Accounts Payable $25,900
To record the purchase of materials on account.
Accounts Payable $24,500
Cash Account $24,500
To record the payment on account.
Work-in-Process Inventory $30,900
Materials Inventory $30,900
To record the issue of direct materials to the production department.
Work-in-Process Inventory $29,500
Factory Wages $29,500
To record direct labor costs to work in process.
Manufacturing Overhead $22,400
Cash Account $22,400
To record the payment for utilities and other expenses.
Work-in-Process Inventory $35,400
Manufacturing Overhead $35,400
To apply overhead to work in process.
Manufacturing Overhead $5,900
Depreciation Expense $5,900
To recognize depreciation on property, plant, and equipment.
Manufacturing overhead applied $29,750
Manufacturing overhead $29,750
To transfer manufacturing overhead to the overhead applied account.
b) T-accounts:
Materials Inventory
Transaction Details Debit Credit
Beginning balance $ 13,500
Accounts Payable 24,500
Manufacturing overhead $1,450
Accounts Payable 25,900
Work-in-Process Inventory 30,900
Ending balance $31,550
Work-in-Process Inventory
Transaction Details Debit Credit
Beginning balance $24,750
Materials Inventory 30,900
Factory Wages 29,500
Manufacturing Overhead 35,400
Finished Goods Inventory $71,600
Ending balance 54,200
Finished Goods Inventory
Transaction Details Debit Credit
Beginning balance $97,500
Work-in-Process 71,600
Cost of goods sold $114,350
Ending balance 54,750
Cost of Goods Sold
Transaction Details Debit Credit
Beginning balance $120,000
Overapplied overhead $5,650
Ending balance 114,350
Manufacturing Overhead Control Account
Transaction Details Debit Credit
Materials Inventory $1,450
Cash Account 22,400
Depreciation expense 5,900
Manufacturing overhead applied $29,750
Manufacturing Overhead Applied
Transaction Details Debit Credit
Work in Process $35,400
Manufacturing overhead $29,750
Overapplied overhead 5,650
Accounts Payable
Transaction Details Debit Credit Materials Inventory $24,500
Materials Inventory 25,900
Cash Account $24,500
Ending Balance 25,900
Cash Account
Transaction Details Debit Credit
Accounts Payable $24,500
Manufacturing Overhead 22,400
Explanation:
a) Data and Calculations:
Accounts balances of Sunset Products for March:
Beginning Ending
Materials Inventory $ 13,500 ?
Work-in-Process Inventory 24,750 ?
Finished Goods Inventory 97,500 $ 54,750
Cost of Goods Sold 120,000
Read the overview below and complete the activities that follow. In addition to trade accounts payable, many companies have other types of current liabilities. These include amounts withheld from employees' pay, sales and other taxes payable, deposits, and other accrued liabilities.
CONCEPT REVIEW:
Companies have many different types of current liabilities. These can include various taxes payable (income tax, sales tax, payroll tax), accrued amounts for salary, vacation or other benefits, and estimates such as accrued utilities and warranty. To adhere to the concept of the matching principle, companies must estimate the amount of their other liabilities.
1. Federal anid state governments do not specily the exact______to be maint, but do specify the amounts to be withheld.
2. Income taxes withheld from employees but not yet submitted to the govenment are considered to be a(n)______.
3. When testing customer deposits, auditors typically review a(n)______of the individual deposits.
4. When testing other accrued liabilities. auditors may independently calculate the amount and______ it to management's estimate.
5. Property tax payments are typically______in number.
Answer:
1. Federal and state governments do not specify the exact__number of accounts____to be maintained, but do specify the amounts to be withheld.
2. Income taxes withheld from employees but not yet submitted to the government are considered to be a(n)_liability_____.
3. When testing customer deposits, auditors typically review a(n)_sample_____of the individual deposits.
4. When testing other accrued liabilities. auditors may independently calculate the amount and__compare____ it to management's estimate.
5. Property tax payments are typically_numerous_____in number.
Explanation:
Even Federal and State governments and business organizations apply the matching principle of the generally accepted accounting principles. The principle requires that revenues are matched to the expenses that are incurred in generating them and vice versa. The purpose is to present a balance view of financial performance and position of the reporting entity. For this reason, who expenses may not be actually paid for and they are recognized while some that have been paid for are not. The same rule applies to the revenue side.
Alpha Inc. has receivables from unrelated parties with a face value of $5,000. It transfers these receivables to bank for $4,500, without recourse. It will continue to collect the receivables, depositing them in a non-interest-bearing bank account with the cash flows remitted to the bank at the end of each month. It is not allowed to sell or pledge the receivables to anyone else and is under no obligation to repurchase the receivables from bank. Which of the following is the appropriate treatment for these Accounts receivables?
A) It should show these receivables in its Balance Sheet.
B) It should amortize these receivables.
C) It should derecognize these receivables.
D) It should derecognize these receivables if it retains the interest earned on these.
Answer:
The correct option is C) It should derecognize these receivables
Explanation:
Based on the information given the right and appropriate treatment of the ACCOUNT RECEIVABLES is to derecognized the receivable reason been that Alpha Inc does not have the right to either sell or pledge the receivables neither can he repurchased the receivable from the financial institution which is the bank despite the fact that the cash flows amount is been remitted to the bank at the end of every month.
Rachel pushed very hard to go with Project A rather than Project B. There have been several cost overruns, the project is two weeks beyond its projected finish date, and the technology just isn't working out as planned. Rachel increases the funding for the third time and hires three new designers to help revamp the look of the product. Rachel is engaging in _____.
Answer: escalation of commitment
Explanation:
Escalation of commitment is when an individual or firm chooses an option which tends to be unsuccessful but the individual or firm still continues with the project because there has been investment which has already been made on it.
From the question, we are told that Rachel pushed very hard to go with Project A rather than Project B. From the information given, despite the fact that project A has been unsuccessful, Rachel continued with it and invested more in it rather than changing or leaving it for project B. This shows that Rachel is engaging in escalation of commitment.
The premium on a three-year insurance policy expiring on December 31, 20x11, was paid in total on January 1, 20x9. The original payment was initially debited to a prepaid asset account. The appropriate journal entry has been recorded on December 31, 20x9. The balance in the prepaid asset account on December 31, 20x9 should be Select one: a. The same as the original payment b. The same as it would have been if the original payment had been debited initially to an expense account c. Higher than if the original payment had been debited initially to an expense account d. Zero Check
Answer:
b. The same as it would have been if the original payment had been debited initially to an expense account
Explanation:
We can use an example to explain this:
original journal entry to record a 3 year insurance policy on January 1 is:
Dr Prepaid insurance 3,600
Cr Cash 3,600
Adjusting entry on December 31
Dr Insurance expense 1,200
Cr Prepaid insurance 1,200
balance of prepaid insurance = $3,600 - $1,200 = $2,400
If instead of recording prepaid insurance on January 1, you recorded insurance expense:
Dr Insurance expense 3,600
Cr Cash 3,600
Adjusting entry on December 31
Dr Prepaid insurance 2,400
Cr Insurance expense 2,400
balance of prepaid insurance = $2,400
King Costume uses a periodic inventory system. The company started the month with 6 masks in its beginning inventory that cost $8 each. During the month, King Costume purchased 41 additional masks for $10 each. At the end of the month, King counted its inventory and found that 3 masks remained unsold. Using the LIFO method, its cost of goods sold for the month is:
Answer:
$464
Explanation:
Periodic Inventory method is being used. That means valuation of inventory is done at the end of a specific period.
LIFO method is also used for determining the cost of inventory sold. FIFO stands for Last In First Out.
Calculation of Cost of Goods Sold :
41 unit × $10 = $440
3 units × $8 = $24
Total = $464
The cost of goods sold for the month is: $464
University Printers has two service departments Maintenance and Personnel and two operating departments Printing and Developing. Management has decided to allocate maintenance costs on the basis of machine-hours in each department and personnel costs on the basis of labor-hours worked by the employees in each.
The following data appear in the company records for the current period:
Maintenance Personnel Printing Developing
Machine-hours ? 455 455 2,590
Labor-hours 315 ? 294 1,491
Department direct cost 11,000 $23,000 $25,000 $23,000
Required: Allocate the service department costs using the reciprocal method. Negative amounts should be indicated by a minus sign. Do not round intermediate calculations.
Answer:
Machine hour percentages -Allocation of Maintenance Costs
455 + 455 + 2,590 = 3,500 total machine hrs
Personnel = 455 / 3,500 = 13%
Printing = 455 / 3,500 = 13%
Developing = 2,590 / 3,500 = 74%
Labor hr. percentages--Allocation of Personnel costs
315 + 294 + 1,491 = 2,100 total labor hrs.
Maintenance = 315 / 2,100 = 15%
Printing = 294 / 2,100 = 14%
Developing = 1,491 / 2,100 = 71%
Service
Maintenance Personnel Printing Developing
Costs before allocation 11,000 23,000 25,000 23,000
Allocate maintenance costs -11,000 1,430 1,430 8,140
0 24,430
Allocate personnel costs 3664.5 -24430 3420.2 17345.3
Allocate maintenance costs -3664.5 476.39 476.39 2711.73
Allocate personnel costs 71.46 -476.39 66.69 338.24
Allocate maintenance costs -71.46 9.29 9.29 52.88
Allocate personnel costs 1.39 -9.29 1.3006 6.5959
Allocate maintenance costs -1.39 0 0 1.39
Total costs 0.00 0.00 30403.87 51596.13
Workings
Allocate maintenance costs
Personnel = (11000 * 13%) = 1430
Printing = (11000 * 13%) = 1430
Developing = (11000 * 74%) = 8140
Allocate personnel costs
Maintenance = 24430 * 15% =
Printing = (24430 * 14%) =
Developing = (24430 * 71%) =
Allocate maintenance costs
Personnel = (3664.5 * 13%)
Printing = (3664.5 * 13%)
Developing = (3664.5 * 74%)
Allocate personnel costs
Maintenance = (476.39 * 15%)
Printing = (476.39 * 14%)
Developing = (476.39 * 71%)
Allocate maintenance costs
Personnel = (71.46 * 13%)
Printing = (71.46 * 13%)
Developing = (71.46 * 74%)
Allocate personnel costs
Maintenance= (9.29 * 15%)
Printing = (9.29 * 14%)
Developing = (9.29 * 71%)
True or false, Is server a collection of computers and devices connected together wirelessly
Answer:
True
Explanation:
A network is a collection of computers and devices connected together via communications devices and transmission media. Many businesses network their computers together to facilitate communications, share hardware, share data and information, share software, and transfer funds.
Answer:
True
Explanation:
If the amount of credit is 300,000 how much is the discount if the debtor is given a credit term of 2/10 N/30?show your
Answer:
6,000
Explanation:
In credit sales, 2/10 Net 30 means that the seller has offered the customer a trade discount. 2/10 net 30 is a conditional discount available if payment is made in 10 days. It's a 2% discount should the customer pay in 10 days, if not so, the full amount is due within 30 days.
The discount amount for 300,000 is 2 percent of 300,000.
=2/100 x 300,000
=0.02 x 300,000
=6,000