Answer: A. Cell
Explanation:
A cell is the point on the worksheet that results from the intersection of a column and a row.
This is why cells can be identified by the column and row that they are the result of. For instance, a cell can be called "A12" which is also known as its "address". This means that it is a result of the intersection of "Column A" and "Row 12".
Q. Describe the T.V. as an ICT tool.
Answer:
TV or modern televisions are also a type of ICT tool because we get a wide amount of information about mass communication through the various news channels on the TV. TV is now also the most popular as well as a cheap medium of mass communication.
In c please
Counting the character occurrences in a file
For this task you are asked to write a program that will open a file called “story.txt
and count the number of occurrences of each letter from the alphabet in this file.
At the end your program will output the following report:
Number of occurrences for the alphabets:
a was used-times.
b was used - times.
c was used - times .... ...and so, on
Assume the file contains only lower-case letters and for simplicity just a single
paragraph. Your program should keep a counter associated with each letter of the
alphabet (26 counters) [Hint: Use array|
| Your program should also print a histogram of characters count by adding
a new function print Histogram (int counters []). This function receives the
counters from the previous task and instead of printing the number of times each
character was used, prints a histogram of the counters. An example histogram for
three letters is shown below) [Hint: Use the extended asci character 254]:
Answer:
#include <stdio.h>
#include <ctype.h>
void printHistogram(int counters[]) {
int largest = 0;
int row,i;
for (i = 0; i < 26; i++) {
if (counters[i] > largest) {
largest = counters[i];
}
}
for (row = largest; row > 0; row--) {
for (i = 0; i < 26; i++) {
if (counters[i] >= row) {
putchar(254);
}
else {
putchar(32);
}
putchar(32);
}
putchar('\n');
}
for (i = 0; i < 26; i++) {
putchar('a' + i);
putchar(32);
}
}
int main() {
int counters[26] = { 0 };
int i;
char c;
FILE* f;
fopen_s(&f, "story.txt", "r");
while (!feof(f)) {
c = tolower(fgetc(f));
if (c >= 'a' && c <= 'z') {
counters[c-'a']++;
}
}
for (i = 0; i < 26; i++) {
printf("%c was used %d times.\n", 'a'+i, counters[i]);
}
printf("\nHere is a histogram:\n");
printHistogram(counters);
}
Operating Expenses for a business includes such things as rent, salaries, and employee benefits.
Answer:
TRUE
Explanation:
ghggggggggggggghbbbbbjhhhhhhhh
Answer:
Something wrong?
Explanation:
Suppose we wanted to make change for purchases and wanted to use the least number of coins possible. Here is a greedy algorithm: for the change amount due, we always use the largest-face-value coin first. Assume we have only coins of quarters ($.25), twenties ($.20), and pennies ($.01). Assume the change is $.40: a. what would be the coins and their numbers obtained by the greedy algorithm above
Answer:
Explanation:
The following code is a Python function that takes in the amount of change. Then it uses division and the modulo operator to calculate the number of coins that make up the changes, using the greatest coin values first.
import math
def amountOfCoins(change):
print("Change: " + str(change))
quarters = math.floor(change / 0.25)
change = change % 0.25
dimes = math.floor(change / 0.20)
change = change % 0.20
pennies = math.floor(change / 0.01)
print("Quarters: " + str(quarters) + "\nDimes: " + str(dimes) + "\nPennies: " + str(pennies))
PLEASE HELP ME ASAP!!!!
what is the Is option that prints to the author of a file?
Answer:
We need to use Option - 'author' along with option- 'l'How should work be allocated to the team in a Scrum project?
Answer:
In a Scrum project, the work or the tasks are not allotted specifically. The Scrum Master is not allowed to assign tasks to the team members under any circumstance. Once the client provides the details regarding their requirements in detail, the tasks are distributed based on the expertise and skills of the employee.
Explanation:
The first real web browsers that looked even somewhat like the web we know today were not created until which year?
O 1996
1994
O 1997
O 1995
Answer:
1994 is the answer . make me brainlist
Write a recursive method named hanoi that prints a solution to the classic Towers of Hanoi puzzle. Your method should accept three integer parameters representing the number of disks, the starting page number, and ending peg number. Your method should print the solution to the game to move from the given start peg to the given end peg. For example, the call of hanoi(3, 1, 3); should print the following output to move the three pegs from peg
Answer:
Explanation:
The following recursive method is written in Java. It creates a simulation of the towers of Hanoi and outputs every step-by-step instruction on how to solve it. The output for the code can be seen in the attached picture below.
class Brainly {
public static String hanoi(int numOfDisks, int startPeg, int endPeg) {
int helpPeg;
String sol1, sol2, MyStep, mysol; // Contains moves
if (numOfDisks == 1) {
return "Move from " + startPeg + " to " + endPeg + "\n";
} else {
helpPeg = 6 - startPeg - endPeg; // Because startPeg + helpPeg + endPeg = 6
sol1 = hanoi(numOfDisks - 1, startPeg, helpPeg);
MyStep = "Move from " + startPeg + " to " + endPeg + "\n";
sol2 = hanoi(numOfDisks - 1, helpPeg, endPeg);
mysol = sol1 + MyStep + sol2; // + = String concatenation !
return mysol;
}
}
public static void main(String[] args) {
String output = hanoi(3, 1, 3);
System.out.println(output);
}
}
Write an algorithm and flowchart to display H.C.F and L.C.M of given to numbers.
Answer:
Write an algorithm to input a natural number, n, and calculate the odd numbers equal or less than n. ... Design an algorithm and flowchart to input fifty numbers and calculate their sum. Algorithm: Step1: Start Step2: Initialize the count variable to zero Step3: Initialize the sum variable to zero Step4: Read a number say x Step 5: Add 1 to the number in the count variable Step6: Add the ..
Explanation:
Write a function input_poly(ptr1) that reads in two polynomials at a time with coefficient and exponent from a file cp7_in.txt. The file will contain 2n polynomials, where n is an integer that is 10 or less. Space for the polynomial will be allocated in run time and there is no limit to the size of the polynomial, e..g the first two lines of the file is
Answer:
try this
Explanation:
#include<stdio.h>
#include<malloc.h>
typedef struct poly{ double coff;
int pow;
struct poly *link; }SL;
void create(SL **head)
{
*head=NULL;
}
//Insertion
void ins_beg(SL ** head, double c, int pw)
{
SL *ptr;
ptr=(SL *)malloc(sizeof(SL));
ptr->coff=c;
ptr->pow=pw;
ptr->link=*head;
*head=ptr;
}
void trav(SL **head)
{
SL *ptr;
ptr=*head;
printf("\n\t Cofficient Exponent\n");
while(ptr!=NULL)
{ printf("\t\t%3.2f \t%d\n",ptr->coff, ptr->pow);
ptr=ptr->link;
}
}
//addition of polynomial............
void mult(SL *pl1, SL *pl2, SL **res)
{
SL trav1, trav2, ptr, new1,*loc;
int x,y;
trav1=*pl1;
while(trav1!=NULL)
{
trav2=*pl2;
while(trav2!=NULL)
{
x=(trav1->coff)*(trav2->coff);
y=(trav1->pow)+(trav2->pow);
//printf("\t%d\t%d\n",x,y);
if(*res==NULL)
{
new1=(SL *)malloc(sizeof(SL));
new1->coff=x;
new1->pow=y;
new1->link=NULL;
*res=new1;
}
else
{
ptr=*res;
while((y<ptr->pow)&&(ptr->link!=NULL))
{
loc=ptr;
ptr=ptr->link;
}
if(y==ptr->pow)
ptr->coff=ptr->coff+x;
else
{
if(ptr->link!=NULL)
{
new1=(SL *)malloc(sizeof(SL));
new1->coff=x;
new1->pow=y;
loc->link=new1;
new1->link=ptr;
}
else
{
new1=(SL *)malloc(sizeof(SL));
new1->coff=x;
new1->pow=y;
ptr->link=new1;
new1->link=NULL;
}
}
}
trav2=trav2->link;
}
trav1=trav1->link;
}
}
//...addition..............
void add(SL *pl1, SL *pl2)
{
SL trav1, ptr, *new1,*loc; trav1=*pl1;
while(trav1!=NULL)
{
loc=ptr=*pl2;
while((trav1->pow<ptr->pow)&&(ptr->link!=NULL))
{
loc=ptr; ptr=ptr->link;
}
if(loc==ptr)
{
new1=(SL *)malloc(sizeof(SL));
new1->coff=trav1->coff;
new1->pow=trav1->pow;
new1->link=*pl2;
*pl2=new1;
}
else
if(trav1->pow==ptr->pow)
{
ptr->coff=ptr->coff+trav1->coff;
//ptr->pow=ptr->pow+trav1->pow;
}
else
if(ptr->link!=NULL)
{
new1=(SL *)malloc(sizeof(SL));
new1->coff=trav1->coff;
new1->pow=trav1->pow;
new1->link=ptr;
loc->link=new1;
}
else
{
new1=(SL *)malloc(sizeof(SL));
new1->coff=trav1->coff;
new1->pow=trav1->pow;
new1->link=NULL;
ptr->link=new1;
}
trav1=trav1->link;
}
}
int main()
{
SL first, sec, *res;
create(&first);
ins_beg(&first,10.25,0);
ins_beg(&first,4,1);
ins_beg(&first,5,2);
ins_beg(&first,4,4);
printf("\nFirst Polinomial:\n");
trav(&first);
create(&sec);
ins_beg(&sec,11,0);
ins_beg(&sec,6,1);
ins_beg(&sec,4,2);
ins_beg(&sec,3,3);
printf("\nSecond Polinomial:\n");
trav(&sec);
create(&res);
printf("\nMultiplication of two Polinomial:\n");
mult(&first,&sec,&res);
trav(&res);
printf("\nAddition of two Polinomial:\n");
add(&first,&sec);
trav(&sec);
//trav(&first);
return 0;
}
Who first demonstrated the computer mouse?
O Microsoft
O Alan Turing
O Douglas Engelbart
O Apple, Inc.
FAST PLEASEEE THANK YOUUU
Answer:
C. Douglas Engelbart
Explanation:
Answer: C
Explanation:
What are 3 data Gathering method that you find effective in creating interactive design for product interface and justify your answer?
Answer:
In other words, you conducted the four fundamental activities that make up the interaction design process – establishing requirements, designing alternatives, prototyping designs, and evaluating prototypes.
Explanation:
What is the problem with paying only your minimum credit card balance each month?
A. It lowers your credit score
B. You have to pay interest
C. The bank will cancel your credit card
D. All of the above
Answer:b
Explanation:
Answer: The answer is B.
Explanation: While yes it is important to make at least the minimum payment, its not ideal to carry a balance from month to month (You'll rack up interest charges). And risk falling into debt. Therefore, the answer is B.
Hope this helps!
Write a program to generate a square wave with 80% duty cycle on bit P2.7 Microprocessor.
Answer:
assuming its assembly (otherwise just delete this ans)
Explanation:
MOV TMOD , #01 ;
MOV TLO, #00 ;
MOV THO, #DCH
CPL P1.5
ACALL DELAY
SJMP HERE
;generate delay using Timer 0
DELAY:
SETB TR0
AGAIN:
JNB TF0 ,AGAIN
CLR TR0
CLR TF0
RET
when the tv was created (year)
Answer:
1927
Explanation:
Answer:
1971 is the year
How can technical writers help readers focus on important information in a set of instructions?
Technical writers can bring a reader's attention to important details in a set of instructions by ___.
1. adding an explanation and caution
2. using a highlighting technique
3. repeating the information
4. adding graphics to the introduction
Answer:
2. using a highlighting technique
Explanation:
highlighting is for to draw attention
Plz hurry it’s timed
Color, font, and images are all important aspects of good
I'll mark brainest
Answer:
of good design, so its c ....
Answer: Design
Color, font, and images are all important aspects of good Design.
, Hope this helps :)
Have a great day!!
Working with do-while loop
Bring the program dowhile.cpp from the Lab 5 folder.
The code is shown below:
______________________________________________________________________________
// This program displays a hot beverage menu and prompts the user to
// make a selection. A switch statement determines which item the user
// has chosen. A do-while loop repeats until the user selects item E
// from the menu.
// PLACE YOUR NAME HERE
#include
#include
using namespace std;
int main()
{
// Fill in the code to define an integer variable called number,
// a floating point variable called cost,
// and a character variable called beverage
bool validBeverage;
cout << fixed << showpoint << setprecision(2);
do
{
cout << endl << endl;
cout << "Hot Beverage Menu" << endl << endl;
cout << "A: Coffee $1.00" << endl;
cout << "B: Tea $ .75" << endl;
cout << "C: Hot Chocolate $1.25" << endl;
cout << "D: Cappuccino $2.50" << endl <
cout << "Enter the beverage A,B,C, or D you desire" << endl;
cout << "Enter E to exit the program" << endl << endl;
// Fill in the code to read in beverage
switch(beverage)
{
case 'a':
case 'A':
case 'b':
case 'B':
case 'c':
case 'C':
case 'd':
case 'D': validBeverage = true;
break;
default: validBeverage = false;
}
if (validBeverage == true)
{
cout << "How many cups would you like?" << endl;
// Fill in the code to read in number
}
// Fill in the code to begin a switch statement
// that is controlled by beverage
{
case 'a':
case 'A': cost = number * 1.0;
cout << "The total cost is $ " << cost << endl;
break;
// Fill in the code to give the case for tea ( $0.75 a cup)
//Fill in the code to give the case for hot chocolate($1.25 a cup)
// Fill in the code to give the case for cappuccino ($2.50 a cup)
case 'e':
case 'E': cout << " Please come again" << endl;
break;
default:cout << // Fill in the code to write a message
// indicating an invalid selection.
cout << " Try again please" << endl;
}
} // Fill in the code to finish the do-while statement with the
// condition that beverage does not equal (E or e).
// Fill in the appropriate return statement
}
Answer:
it throws an error with the includes.
and some undeclared variables.
Explanation:
please fix that.
NO LINKS OR SPAMS THEY WILL BE REPORTD
Click here for 50 points
Answer:
thanks for the point and have a great day
(01)²
what is 2 in this number
Answer and Explanation:
It's an exponent (2 is squared I believe)
When you have an exponent, multiply the big number by the exponent
Ex: [tex]10^2[/tex]= 10x2=20
Ex: [tex]10^3\\[/tex]= 10x3=30
How do u and justify a document
Write a Java program named Problem 3 that prompts the user to enter two integers, a start value and end value ( you may assume that the start value is less than the end value). As output, the program is to display the odd values from the start value to the end value. For example, if the user enters 2 and 14, the output would be 3, 5, 7, 9, 11, 13 and if the user enters 14 and 3, the output would be 3, 5, 7, 9, 11, 13.
Answer:
hope this helps
Explanation:
import java.util.Scanner;
public class Problem3 {
public static void main(String[] args) {
Scanner in = new Scanner(System.in);
System.out.print("Enter start value: ");
int start = in.nextInt();
System.out.print("Enter end value: ");
int end = in.nextInt();
if (start > end) {
int temp = start;
start = end;
end = temp;
}
for (int i = start; i <= end; i++) {
if (i % 2 == 1) {
System.out.print(i);
if (i == end || i + 1 == end) {
System.out.println();
} else {
System.out.print(", ");
}
}
}
}
}
Type the correct answer in the box. Spell all words correctly. Complete the sentence below that describes an open standard in video production. Today, video production has become digital, and all playback devices work on the open standard known as *blank* technology.
Answer:
digital
Explanation:
Today, video production has become digital, and all playback devices work on the open standard known as digital technology.
In this lab, you complete a partially prewritten Python program that uses a list.
The program prompts the user to interactively enter eight batting averages, which the program stores in an array. It should then find the minimum and maximum batting averages stored in the array, as well as the average of the eight batting averages. The data file provided for this lab includes the input statement and some variable declarations. Comments are included in the file to help you write the remainder of the program.
Instructions
Make sure the file BattingAverage.py is selected and open.
Write the Python statements as indicated by the comments.
Execute the program by clicking the "Run Code" button at the bottom of the screen. Enter the following batting averages: .299, .157, .242, .203, .198, .333, .270, .190. The minimum batting average should be .157 and the maximum batting average should be .333. The average should be .2365.
Grading
When you have completed your program, click the "Grade" button to record your score.
Lists
BattingAverage.py
4
43
Unix Terminal>
1 # Declare a named constant for array size here.
2 MAX_AVERAGES = 8
3?
4 # Declare array here.
5 averages = []
6 ?
7 # Write a loop to get batting averages from user and assign to array.
8 for i in range(MAX_AVERAGES):
9 averageString = input("Enter a batting average: ")
10 battingAverage = float(averageString)
11 # Assign value to array.
12 averages.append(battingAverage)
13 ?
14 # Assign the first element in the array to be the minimum and the maximum.
15 minAverage = averages[0]
16 maxAverage = averages[0]
17 # Start out your total with the value of the first element in the array.
18 total = averages[0]
19 # Write a loop here to access array values starting with averages[1]
20 ?
21 # Within the loop test for minimum and maximum batting averages.
22 for i in range(1, MAX_AVERAGES):
23 f averages[i] < minAverage:
24 minAverage = averages[i]
25 if averages[i] > maxAverage:
26 maxAverage = averages[i]
27 total += averages[i]
28 ?
29 # Also accumulate a total of all batting averages.
30 ?
31 ?
32 # Calculate the average of the 8 batting averages.
33 average = total / MAX_AVERAGES
34 ?
35 # Print the batting averages stored in the averages array.
36 for avg in averages:
37 print(avg)
38 ?
39 # Print the maximum batting average, minimum batting average, and average batting average.
40 print('Maximum batting average is ' + str(maxAverage))
41 print('Minimum batting average is ' + str(minAverage))
42 print('Average batting average is ' + str(average))
43 ?
W
Run Code
Ctrl + Enter
TestGrade
Answer:
See Explanation
Explanation:
Required
Complete the given code
First, it should be noted that the original code (in the question) is complete, however it is poorly formatted.
The errors that may arise when the code is run is as a result of the poor format of the code.
I've corrected all errors and I fixed the indentations in the original code.
See attachment for the complete code.
New cars use embedded computers to make driving safer
Answer:
true.......................
New cars use embedded computers to make driving safer. The given statement is true.
What is RAM?
The word RAM stands for random-access memory and it is known as memory of short term where data is stored and as required by the processor. This is not there to deal with long term data and it is working after the computer turned off.
Generally, there are three types of RAM and these are SRAM, ECC, and DRAM. The SRAM stands for static random memory, and DRAM stands for dynamic access memory.
CPU stands for central processing unit and commonly it is known as brain of the computer, the main function of CPU is to control the function of the computer or system and it gives command to the parts of computer.
Therefore, New cars use embedded computers to make driving safer. The given statement is true.
Learn more about RAM and CPU here:
brainly.com/question/21252547
#SPJ2
Which principle of layout design is shown below
Java 2D Drawing Application. The application will contain the following elements:
a) an Undo button to undo the last shape drawn.
b) a Clear button to clear all shapes from the drawing.
c) a combo box for selecting the shape to draw, a line, oval, or rectangle.
d) a checkbox which specifies if the shape should be filled or unfilled.
e) a checkbox to specify whether to paint using a gradient.
f) two JButtons that each show a JColorChooser dialog to allow the user to choose the first and second color in the gradient.
g) a text field for entering the Stroke width.
h) a text field for entering the Stroke dash length.
I) a checkbox for specifying whether to draw a dashed or solid line.
j) a JPanel on which the shapes are drawn.
k) a status bar JLabel at the bottom of the frame that displays the current location of the mouse on the draw panel.
If the user selects to draw with a gradient, set the Paint on the shape to be a gradient of the two colors chosen by the user. If the user does not chosen to draw with a gradient, the Paint with a solid color of the 1st Color.
Note: When dragging the mouse to create a new shape, the shape should be drawn as the mouse is dragged.
Answer:
sadness and depression is my answer
Explanation: