11 The cross section compares the densities of different Earth layers. Which Earth layer is most dense?

Answer:

D. The energy level of the electron.

Explanation:

There are four quantum numbers which are used to describe the movement and paths or positon of each electron within an atom. Quantum numbers can be used to determine the electronic configuration of atoms and the most likely location of the atom's electrons. Quantum numbers are also used in determining other characteristics of atoms, such as ionization energy and the atomic radius.

The four quantum numbers are namely, principal, azimuthal, magnetic and spin quantum numbers.

Principal quantum numbers are denoted by the symbol ‘n’. They describe the principal electron shell or energy level the atom.The value of the principal quantum number are positive integer values that is equal to or greater than one. The value n = 1 represents the innermost electron shell of an atom, which corresponds to the lowest energy state of an electron. The larger the values of 'n' the greater the energy level and the farther the electron is from the nucleus.

Answer:

Matter is never created or destroyed

Answer:

7.97 moles

Explanation:

The number of moles (n) of iron (Fe) in this question can be calculated by dividing its number of atoms by Avogadro's number (6.02 × 10²³ atoms).

That is;

n = number of molecule ÷ Avogadro's number

According to this question, the number of atoms of Fe is given as 4.8 x 10²⁴ atoms.

Hence,

n = 4.8 x 10²⁴ ÷ 6.02 × 10²³

n = 4.8/6.02 × 10^(24-23)

n = 0.797 × 10¹

n = 7.97 moles

Answer: Electricity

Answer:

J.J Thomas in 1897

Answer:

19ml

Explanation:

trust me

Answer:

the answer is

Explanation:

number of mollecoles

In chemistry a coefficient denotes the number that is seen in front of the formula of a equation. The coefficient in the given equation 4CO₂ is 4.

A number which precedes the formulas of reactants and products in order to balance a chemical equation is defined as a coefficient. It represents the number of atoms or molecules of each elements which are present in the reaction.

A chemical equation should be balanced and it must obey the law of conservation of mass which states that the number of reactants and products on both sides of the equation should be equal.

The coefficients are the numbers which are required to balance a chemical equation and it may vary while balancing a equation. The coefficient is found to be 1 if no number is mentioned in front of the formula of the reactants and products.

In the given equation 4CO₂, 4 is the coefficient which shows that 4 'C' atoms and 8 'O' atoms are present in the compound CO₂.

Thus the coefficient in the compound 4CO₂ is 4.

To know more about the coefficient, visit;

https://brainly.com/question/29629123

#SPJ6      

Answer:

Solution A is 1,000 times more acidic than Sol. B

Explanation:

for pH values we use scientific notation:

-log10 c (where c is the hydrogen ion concentration) is used to notate pH value (think of it as a unit)

ie:

10^-2 is sol A 10^-5 is sol B

5-2 is 3

10^-3 = 1000

there's a diff of 1,000 between the solutions.

The acidity or alkalinity of a solution depends on the hydronium ion concentration and hydroxide ion concentration. Here the solution A of pH 2.0 is more acidic than the solution of pH 5.0.

The pH of a solution is defined as the negative logarithm to the base 10 of the value of the hydronium ion concentration in moles per litre. When the pH of the solution is less than 7 it is acidic whereas when pH is greater than 7, it will be basic.

The pH of the solution is calculated by the equation:

pH = - log [H₃O⁺]

Then the concentration of H₃O⁺ is:

[H₃O⁺] = 10⁻pH

At pH = 2.0, [H₃O⁺] = 10⁻² = 0.01

At pH = 5.0, [H₃O⁺] = 10⁻⁵ = 0.00001

Thus here the Solution A is 1,000 times more acidic than Solution B.

To know more about pH, visit;

https://brainly.com/question/27945512

#SPJ3

Answer:

__3__parasitism-Ticks can attach to the skin of humans or other mammals.  The ticks feed on the blood to grow.

__1__mutualism-Nitrogen-fixing bacteria get a place to live and food in the roots of plants while helping the plant.

__2__commensalism-Bromeliads are plants that live in the tall trees in the rainforest. The tree is not harmed by them.

Explanation:

The word that describes each statement would be mutualism, commensalism, and parasitism respectively.

It is a form of interaction involving two organisms of different species.

There are different types of symbiotic interactions:

More on symbiotic relationships can be found here:https://brainly.com/question/3350498

#SPJ2

Answer:

- One mole of oxygen was used in this reaction.

- Two moles of water were produced from this reaction.

Explanation:

In addition: - Two moles of hydrogen were used.

Given the data from the question, the correct statement is:

To know which options are correct, we shall determine the number of mole of O₂ used and the number of mole of H₂O produced.

Balanced equation

2H₂ + O₂ —> 2H₂O

From the balanced equation above,

2 moles of H₂ required 1 mole of O₂

Therefore,

1 mole of H₂ will require = 1 / 2 = 0.5 mole of O₂

Thus, 0.5 mole of O₂ is needed for the reaction

From the balanced equation above,

2 moles of H₂ reacted to produce 2 moles of H₂O

Therefore,

1 mole of H₂ will also react to to produce 1 mole of H₂O

Thus, 1 mole of H₂O was produced from the reaction.

SUMMARY

When 1 mole of H₂ was used in the reaction,

Considering the options given in the question above, the correct statement is:

Learn more about stoichiometry:

https://brainly.com/question/14735801

Answer: A

Explanation:

A

Heat is the product of the mass, specific heat, and delta temperature. The gold metal will reach the highest temperature. Thus, option A is correct.

Specific heat (c) is the heat required by a substance to get heated a unit mass by a unit of temperature. The specific heat is given as,

[tex]\rm c = \rm \dfrac{Q}{m \times \Delta T}[/tex]

Here, Q is the heat applied, m is the sample's mass and delta T is the change in the temperature.

The value of heat applied is the same for all the metals, so a change in temperature is calculated as,

[tex]\rm \Delta T = \rm \dfrac{Q}{c . m }[/tex]

From this, it can be said that the temperature is inversely related to the specific heat of the metal and hence the metal having the smallest c will have the highest change in the temperature.

Therefore, gold (c = 0.129 J/(g°C)) will reach the highest temperature.

Learn more about specific heat here:

https://brainly.com/question/17218176

#SPJ2

Answer:

Part A

pH ≈ 2.273

Part B

ΔpH ≈ -4.726

Part C

pH ≈ 1.973

Part D

ΔpH ≈ -0.301

Explanation:

Part A

The pH of a solution is given by the negative concentration of hydrogen ions in the solution

2.0 mL = 0.002 L

The number of moles of HCl in 2.0 mL of 4.0 M HCl is given as follows;

1 Liter of 4.0 M HCl contains 4.0 moles of HCl

2.0 mL = 0.002 L 4.0 M HCl contains 0.002 L/(1 L) × 4.0 M = 0.008 moles of HCl

The concentration of 0.008 moles in 1.50 L is given as follows;

Concentration = The number of moles/(The volume in liters)

∴ The concentration of 0.008 moles in 1.50 L, C = 0.008 moles/(1.5 L + 0.002 L)

∴ The concentration of 0.008 moles in 1.50 L, C ≈ 0.00533 moles/liter = 0.00533 M HCl

Given that HCl is a strong acid, we have that HCl dissociates completely to give equal number of H⁺ and Cl⁻ ions;

The number of moles of [H⁺] in the solution = 0.00533 moles

The pH of the solution = -log[H⁺]

∴ pH = -log[5.33 × 10⁻³] ≈ 2.273

The pH of the 1.5 L of pure water will be approximately 2.273

Part B

The pH of the pure water has changed from neutral (pH = 7) tp pH = 2.273

The change in pH is ΔpH = 2.274 - 7 = -4.726

ΔpH ≈ -4.726

Part C

When 2.0 mL of the 4.0 M HCl is added, the solution above, we have;

C = (0.008 + 0.008)/(1.5 + 0.002 + 0.002) ≈ 1.06383 × 10⁻²

The concentration of the solution becomes, C ≈ 1.06383 × 10⁻² mole/liter

The pH becomes, pH = -log(1.06383 × 10⁻²) ≈ 1.973

Part D

The amount by which the pH has changed, ΔpH ≈ 1.973 - 2.274 = -0.301.

Answer:

In a molecular formula, it states the total number of atoms of each element in a molecule.

Explanation:

Answer: The moon's gravitational pull generates something called the tidal force. The tidal force causes Earth—and its water—to bulge out on the side closest to the moon and the side farthest from the moon. These bulges of water are high tides

Explanation:

The moon's gravity affects the oceans nearest the moon because the moon's gravity pulls water into a tidal bulge is a true statement.

The tidal force is the result of the moon's gravitational pull.

The tidal force causes Earth—and its water—to bulge out on its closest and furthest sides from the moon. High tides cause these water bulges.

Thus, the statement is correct.

Learn more about tidal effect

https://brainly.com/question/3130667

#SPJ2

Answer:

2.8l

Explanation:

just make v2 de subject

Answer:

its B

Explanation:

I took the test and its that passage way thing. (tell me if this works for you! it will but just wanna make sure!)

Explanation:

[tex]CH _{3}CH _{2}COOCH _{2} CH _{2}CH _{2}CH _{2}CH _{2}CH _{3}[/tex]

NAME: Hexylpropenoate

Answer: There are [tex]27.701 \times 10^{23}[/tex] molecules in 4.6 moles of ammonium nitrate [tex](NH_{4}NO_{3})[/tex].

Explanation:

According to the mole concept, there are [tex]6.022 \times 10^{23}[/tex] molecules present in 1 mole of every substance.

Hence, the number of molecules present in 4.6 moles of ammonium nitrate are calculated as follows.

[tex]4.6 \times 6.022 \times 10^{23}\\= 27.701 \times 10^{23} molecules[/tex]

Thus, we can conclude that there are [tex]27.701 \times 10^{23}[/tex] molecules in 4.6 moles of ammonium nitrate [tex](NH_{4}NO_{3})[/tex].

Answer:

D

Explanation:

Answer:

hsbdgjvejsnshns gzjs svshs

Answer:

The answer would be a

Explanation:

That is what goes into the plant and oxygen IS an outcome

The required molecule is :

=》option B.) C2H4O2

it has 2 carbon atoms, 4 hydrogen atoms which it twice the number of carbon atoms and 2 oxygen atoms same as carbon.

Answer:

8.36 x 10^24 atoms/molecules

Explanation:

Avagadro's Number: 6.02214076 × 10^23

Avagadro's Number shows the number of molecules in 1 mole of substance. In this case, if there is 13.88 moles of lead, we multiply 13.88 by Avagadro's number:

(6.02214076 × 10^23)(13.88) = 8.358536 x 10^24 = 8.36 x 10^24

Answer:

• Abogado

• Administrador o conservacionista de campo

• Agrícola o agrónomo

• Apiculturísta

• Arquitecto

• Arquitecto ambiental

• Asistente de investigación

• Astrónomo

• Bioquímico

• Científico animal

• Científico avícola

• Científico de suelo

• Consejero vocacional

• Contador

• Criador animal

• Economista

• Entomólogo

• Epidemiólogo

• Farmacólogo

• Físico

• Fitogenetista

• Forestal

• Genetista

• Geoquímico

• Geofísico

• Horticultor

• Ingeniero

• Matemático (incluyendo estadístico)

• Meteorólogo

• Nutriólogo

• Profesor

• Químico

• Silviculturiasta (incluyendo forestalista)

• Terapeuta recreativo

• Topógrafo

• Trabajador social

• Urbanista (incluyendo geógrafo)

• Zoologísta

• Técnico científico de cualquiera de las siguientes disciplinas: ciencias agrícolas, astronomía, biología, química, ingeniería, silvicultura, geología, geofísica, meteorología o física

Explanation:

Answer: FALSE

Explanation:

Answer:

✔ octane

CH3CH2CH2CH2CH2CH2CH2CH3

✔ butane

CH3CH2CH2CH3

✔ methane

CH4

✔ decane

CH3CH2CH2CH2CH2CH2CH2CH2CH2CH3

✔ ethane

CH3CH3

Explanation:

An alkane contains only carbon and hydrogen. The following are the accurate names of the compounds;

An alkane is a compound whose only functional group is the carbon - carbon single bond. This compounds contain only carbon and hydrogen.

The correct names of the compounds are;

CH3CH2CH2CH2CH2CH2CH2CH3 - octane

CH3CH2CH2CH3 - butane

CH4 - methane

CH3CH2CH2CH2CH2CH2CH2CH2CH2CH3 - decane

CH3CH3 - ethane

Learn more about alkane: https://brainly.com/question/11256472

Answer:

5.875 g of Oxygen

Explanation:

We must first balance our decomposition equation KClO3 -> K + ClO3

The amount of oxygen in CLO3 is 3 times the original. We begin by converting 15g of KClO3 to moles. 15 / (39.1 + 35.45 + 3(16) ) = 0.122 mols.

Then we go to moles of oxygen,

.122 * 3 = 0.367 mols of Oxygen

Then to grams of Oxygen

.367 * 16 = 5.875 g