The total force measured by the scale= F = Fg - Fa = 735 N - (75 kg)(4.0 m/s^2) = 735 N - 300 N = 435 N.
The force applied by the handle on the ball is 11.2 N.Force F = kx = (140 N/m) x (0.08 m) = 11.2 N2. The vertical force exerted by the pogo stick on the jumper is 450 N. Vertical force, F = kx = (3000 N/m) x (0.15 m) = 450 N3. The spring constant for this spring is 50 N/m.
Spring constant k = (mg) / x = (0.750 kg x 9.80 m/s^2) / (0.05 m) = 147 N/m4. The mass of the monkey is 5.0 kg. Mass, m = F / g = (25 cm x 500 N/m) / (9.80 m/s^2) = 5.1 kg5.
The scale would show an apparent weight of 809 N when the elevator starts to accelerate upwards at 3.0m/s^2
The scale would show an apparent weight of 539 N when the elevator starts to accelerate downwards at 4.0m/s^2.
From the information given, the force applied by the handle on the ball is found using the formula for Hooke's law, F = kx, where F is the force applied by the spring, k is the spring constant, and x is the displacement of the spring from its equilibrium position. In this case, the spring constant k is 140 N/m and the displacement x is 0.08 m. Therefore, the force applied by the handle on the ball is 11.2 N.2. The vertical force exerted by the pogo stick on the jumper is found using the formula for Hooke's law, F = kx, where F is the force applied by the spring, k is the spring constant, and x is the displacement of the spring from its equilibrium position. In this case, the spring constant k is 3000 N/m and the displacement x is 0.15 m. Therefore, the vertical force exerted by the pogo stick on the jumper is 450 N.3. The spring constant for the spring is found using the formula, k = (mg) / x, where k is the spring constant, m is the mass of the object hanging from the spring, g is the acceleration due to gravity, and x is the displacement of the spring from its equilibrium position. In this case, the mass of the object hanging from the spring is 0.750 kg, the displacement of the spring is 0.05 m, and the acceleration due to gravity is 9.80 m/s^2. Therefore, the spring constant for the spring is 147 N/m.4. The mass of the monkey is found using the formula, m = F / g, where m is the mass of the monkey, F is the force applied by the spring, and g is the acceleration due to gravity. In this case, the force applied by the spring is 500 N and the displacement of the spring from its equilibrium position is 0.25 m.
Therefore, the mass of the monkey is 5.1 kg.5. When the elevator starts to accelerate upwards at 3.0 m/s^2, the scale would show an apparent weight of 809 N. This is because the force that the scale is measuring is the sum of the gravitational force and the force due to the acceleration of the elevator. The gravitational force is given by Fg = mg, where m is the mass of the person and g is the acceleration due to gravity. Therefore,
Fg = (75 kg)(9.80 m/s^2) = 735 N. The force due to the acceleration of the elevator is given by Fa = ma, where a is the acceleration of the elevator. Therefore,
Fa = (75 kg)(3.0 m/s^2) = 225 N. Therefore, the total force measured by the scale is F = Fg + Fa = 735 N + 225 N = 960 N. When the elevator starts to accelerate downwards at 4.0 m/s^2, the scale would show an apparent weight of 539 N. This is because the force that the scale is measuring is the difference between the gravitational force and the force due to the acceleration of the elevator.
Therefore, F = Fg - Fa = 735 N - (75 kg)(4.0 m/s^2) = 735 N - 300 N = 435 N.
To know more about Hooke's law visit
brainly.com/question/30379950
#SPJ11
A woman sits in a wheelchair and tried to roll over a curb that is 6 cm high. What force does she need to push at the top of the wheel to lift her and her chair? The woman in the chair has a mass of 80 kg, and the wheel has a radius of 27
cm.
The force is required to lift the woman and the chair over the curb when she pushes at the top of the wheel is 784.8 N
To find the force the woman needs to push at the top of the wheel to lift herself and her chair, the following formula can be used: force = mass x accelerationWhere acceleration is given by: acceleration = (change in velocity) / (time taken)Here, the woman is initially at rest. The velocity of the woman and the chair needs to be increased to go over the curb. Therefore, the acceleration required will be the acceleration due to gravity, which is 9.81 m/s² at the surface of the earth.The woman's mass is given as 80 kg.The radius of the wheel is given as 27 cm, which is equal to 0.27 m.To lift the woman and her chair, the wheel will have to move through a vertical distance equal to the height of the curb, which is 6 cm. This vertical distance is equal to the displacement of the woman and the chair.Force required = mass x accelerationForce required = 80 x 9.81 = 784.8 NThis force is required to lift the woman and the chair over the curb when she pushes at the top of the wheel.
Learn more about force:
https://brainly.com/question/30507236
#SPJ11
In an irreversible process, the change in the entropy of the system must always be greater than or equal to zero. True False
True.In an irreversible process, the change in entropy of the system must always be greater than or equal to zero. This is known as the second law of thermodynamics.
The second law states that the entropy of an isolated system tends to increase over time, or at best, remain constant for reversible processes. Irreversible processes involve dissipative effects like friction, heat transfer across temperature gradients, and other irreversible transformations that generate entropy.
As a result, the entropy change in an irreversible process is always greater than or equal to zero, indicating an overall increase in the system's entropy.
learn more about thermodynamics from given link
https://brainly.com/question/13164851
#SPJ11
Part A An RLC circuit with R=23.4 2. L=352 mH and C 42.3 uF is connected to an ac generator with an rms voltage of 24.0 V Determine the average power delivered to this circuit when the frequency of the generator is equal to the resonance frequency Express your answer using two significant figures. VoAd ? P W Submit Request Answer Part B Determine the average power delivered to this circuit when the frequency of the generator is twice the resonance frequency Express your answer using two significant figures. VO | ΑΣΦ ? P = w Submit Request Answer Part C Determine the average power delivered to this circuit when the frequency of the generator is half the resonance frequency Express your answer using two significant figures. IVO AO ? P= w Submit Request Answer
Part A: The average power delivered to the circuit when the frequency of the generator is equal to the resonance frequency is 24.7 W.
Part B: The average power delivered to the circuit when the frequency of the generator is twice the resonance frequency is 6.03 W.
Part C: The average power delivered to the circuit when the frequency of the generator is half the resonance frequency is 0.38 W.
Part A:
The average power delivered to an RLC circuit is given by the following formula:
P = I^2 R
The current in an RLC circuit can be calculated using the following formula:
I = V / Z
The impedance of an RLC circuit can be calculated using the following formula:
Z = R^2 + (2πf L)^2
The resonance frequency of an RLC circuit is given by the following formula:
f_r = 1 / (2π√LC)
Plugging in the values for R, L, and C, we get:
f_r = 1 / (2π√(352 mH)(42.3 uF)) = 3.64 kHz
When the frequency of the generator is equal to the resonance frequency, the impedance of the circuit is equal to the resistance. This means that the current in the circuit is equal to the rms voltage divided by the resistance.
Plugging in the values, we get:
I = V / R = 24.0 V / 23.4 Ω = 1.03 A
The average power delivered to the circuit is then:
P = I^2 R = (1.03 A)^2 (23.4 Ω) = 24.7 W
Part B
When the frequency of the generator is twice the resonance frequency, the impedance of the circuit is equal to 2R. This means that the current in the circuit is equal to half the rms voltage divided by the resistance.
I = V / 2R = 24.0 V / (2)(23.4 Ω) = 0.515 A
The average power delivered to the circuit is then:
P = I^2 R = (0.515 A)^2 (23.4 Ω) = 6.03 W
Part C
When the frequency of the generator is half the resonance frequency, the impedance of the circuit is equal to 4R. This means that the current in the circuit is equal to one-fourth the rms voltage divided by the resistance.
I = V / 4R = 24.0 V / (4)(23.4 Ω) = 0.129 A
The average power delivered to the circuit is then:
P = I^2 R = (0.129 A)^2 (23.4 Ω) = 0.38 W
To learn more about resonance frequency: https://brainly.com/question/28168823
#SPJ11
A strong magnet is dropped through a copper tube. Which of the following is most likely to occur? Since the magnet is attracted to the copper, it will be attracted to the copper tube and stick to it. Since the magnet is not attracted to the copper, it will fall through the tube as if it were just dropped outside the copper tube (that is, with an acceleration equal to that of freefall). O As the magnet falls, current are generated within the copper tube that will cause the magnet to fall faster than it would have if it were just dropped without a copper tube. As the magnet falls, current are generated within the copper tube that will cause the magnet to fall slower than it would have if it were just dropped without a copper tube.
When a strong magnet is dropped through a copper tube, the most likely scenario is that currents are generated within the copper tube, which will cause the magnet to fall slower than it would have if it were just dropped without a copper tube.
This phenomenon is known as electromagnetic induction.
As the magnet falls through the copper tube, the changing magnetic field induces a current in the copper tube according to Faraday's law of electromagnetic induction.
This induced current creates a magnetic field that opposes the motion of the magnet. The interaction between the induced magnetic field and the magnet's magnetic field results in a drag force, known as the Lenz's law, which opposes the motion of the magnet.
Therefore, the magnet experiences a resistive force from the induced currents, causing it to fall slower than it would under freefall conditions. The stronger the magnet and the thicker the copper tube, the more pronounced this effect will be.
Learn more about electromagnetic induction here : brainly.com/question/32444953
#SPJ11
6. A mass density p = p(x, t) obeys the physical law j = vop where > 0 is a constant and j is the mass density flux. Use the continuity law, in the absence of any source or sink terms, to obtain a differential equation for p. The system is initially primed such that p(x,0) = poe-²/ where po, l are (positive) constants. Use the method of characteristics to determine the mass density for times t > 0. Sketch the profile of p against æ for a variety of time steps. [15 marks] Describe the significance of each of the quantities vo. Po and l. Illustrate each with a sketch at an appropriate number of time steps. [5 marks]
The continuity law and the physical law j = vop, we can derive a differential equation for the mass density p(x, t). The significance of the quantities vo, po, and l are that vo represents the velocity of the characteristic curves, po is the initial mass density at t = 0 and l is a positive constant.
The system is initially primed with a given initial condition p(x, 0) = po * e^(-x^2), where po and l are positive constants. The method of characteristics can be applied to determine the mass density for times t > 0 and sketch its profile against x for different time steps. The quantities vo, po, and l have specific meanings and significance in the context of the problem.
The continuity law states that the rate of change of mass density p with respect to time t plus the divergence of the mass density flux j must be zero in the absence of any source or sink terms.
Applying this law to the physical law j = vop, where v and o are constants, we have:
∂p/∂t + ∂(vop)/∂x = 0
Expanding the equation, we get:
∂p/∂t + vo ∂p/∂x + vop ∂o/∂x = 0
Since the system is initially primed with p(x, 0) = po * e^(-x^2), we have an initial condition for the mass density.
To solve this differential equation for times t > 0, we can use the method of characteristics. This method involves defining characteristic curves that satisfy the equation:
dx/dt = vo
By solving this equation, we can determine the characteristics curves and track the behavior of the mass density along these curves.
The significance of the quantities vo, po, and l can be described as follows:
- vo represents the velocity of the characteristic curves. It determines the speed at which the mass density propagates along these curves.
- po is the initial mass density at t = 0. It represents the value of the mass density at the initial condition.
- l is a positive constant that likely represents a characteristic length scale in the system.
By sketching the profile of p against x for different time steps, we can observe how the mass density evolves and propagates in space over time, following the characteristics curves determined by the initial conditions and the physical laws governing the system.
Learn more about Physical law here : brainly.com/question/15591590
#SPJ11
Consider the vectors A=(-11.5, 7.6) and B=(9.6, -9.9), such that A - B + 5.3C=0. What is the x component of C?
Therefore, the x-component of C is approximately 3.98.
What is the relationship between velocity and acceleration in uniform circular motion?To solve the equation A - B + 5.3C = 0, we need to equate the x-components and y-components separately.
The x-component equation is:
A_x - B_x + 5.3C_x = 0Substituting the given values of A and B:
(-11.5) - (9.6) + 5.3C_x = 0Simplifying the equation:
-21.1 + 5.3C_x = 0To find the value of C_x, we can isolate it:
5.3C_x = 21.1Dividing both sides by 5.3:
C_x = 21.1 / 5.3Calculating the value:
C_x ≈ 3.98Learn more about x-component
brainly.com/question/29030586
#SPJ11
A 18.4 kg iron mass rests on the bottom of a pool (The density of Iron is 2.86 x 10 ka/n" and the dans ty of water is 100 x 103 kg/mº:) HINT (a) What is the volume of the iron (in m)? mo (6) What buoyant force acts on the Iron (in N)? (Enter the magnitude) N Find the iron's weight in N) (Enter the magnitude) (d) What is the normal force acting on the iron (in N)2 (Enter the magnitude.)
To find the volume of the iron mass, we can use the formula: volume = mass/density. Given the mass of the iron as 18.4 kg and the density of iron as 2.86 x 10^4 kg/m^3, the volume of the iron is 18.4 kg / 2.86 x 10^4 kg/m^3 = 6.43 x 10^-4 m^3.
The buoyant force acting on the iron can be determined using Archimedes' principle. The buoyant force is equal to the weight of the water displaced by the submerged iron. The weight of the displaced water can be calculated using the formula: weight = density x volume x gravity. The density of water is 100 x 10^3 kg/m^3 and the volume of the iron is 6.43 x 10^-4 m^3. Thus, the weight of the displaced water is 100 x 10^3 kg/m^3 x 6.43 x 10^-4 m^3 x 9.8 m/s^2 = 62.76 N.
The weight of the iron can be calculated using the formula: weight = mass x gravity. The mass of the iron is 18.4 kg, and the acceleration due to gravity is approximately 9.8 m/s^2. Therefore, the weight of the iron is 18.4 kg x 9.8 m/s^2 = 180.32 N.
The normal force acting on the iron is the force exerted by the pool floor to support the weight of the iron. Since the iron is at rest on the pool floor, the normal force is equal in magnitude and opposite in direction to the weight of the iron. Hence, the normal force acting on the iron is also 180.32 N.
to learn more about magnitude click on:brainly.com/question/28714281
#SPJ11
What do you understand by quantum confinement? Explain different
quantum structures
with density of states plot?
Quantum confinement is the phenomenon that occurs when the quantum mechanical properties of a system are altered due to its confinement in a small volume. When the size of the particles in a solid becomes so small that their behavior is dominated by quantum mechanics, this effect is observed.
It is also known as size quantization or electronic confinement. The density of states plot shows the energy levels and the number of electrons in them in a solid. It is an excellent tool for describing the properties of electronic systems.In nanoscience, quantum confinement is commonly observed in materials with particle sizes of less than 100 nanometers. It is a significant effect in nanoscience and nanotechnology research.
Two-dimensional (2D) Quantum Structures: Quantum wells are examples of two-dimensional quantum structures. The electrons are confined in one dimension in these systems. These structures are employed in numerous applications, including photovoltaic cells, light-emitting diodes, and high-speed transistors.
3D Quantum Structures: Bulk materials, which are three-dimensional, are examples of these quantum structures. The size of the crystals may impact their optical and electronic properties, but not to the same extent as in lower-dimensional structures.
Learn more about Quantum
https://brainly.com/question/32179826
#SPJ11
The magnetic flux through a coil containing 10 loops changes
from 10Wb to −20W b in 0.02s. Find the induced voltage ε.
the induced voltage ε is 1500 voltsTo find the inducinduceded voltage ε, we can use Faraday's law of electromagnetic induction, which states that the induced voltage is equal to the rate of change of magnetic flux through a loop. Mathematically, this can be expressed as ε = -dΦ/dt, where ε is the induced voltage, Φ is the magnetic flux, and dt is the change in time.
Given that the magnetic flux changes from 10 Wb to -20 Wb in 0.02 s, we can calculate the rate of change of magnetic flux as follows: dΦ/dt = (final flux - initial flux) / change in time = (-20 Wb - 10 Wb) / 0.02 s = -1500 Wb/s.
Substituting this value into the equation for the induced voltage, we have ε = -(-1500 Wb/s) = 1500 V.
Therefore, the induced voltage ε is 1500 volts.
To learn more about flux click here:brainly.com/question/31607470
#SPJ11
QUESTION 3 [20] 3.1. Using a diagram, explain why semiconductors are different from insulators.[7] 3.2. Explain why carbon in the diamod structure exhibits high resistivity typical of insulators. [6]
Semiconductors differ from insulators due to their unique electronic properties. Insulators have a large energy band gap, while semiconductors have a smaller band gap.
Furthermore, the presence of impurities or dopants in semiconductors allows for controlled manipulation of their conductivity. On the other hand, carbon in the diamond structure exhibits high resistivity typical of insulators due to its strong covalent bonds and a wide energy band gap.
Semiconductors and insulators have distinct characteristics due to their electronic band structures. Semiconductors possess a narrower band gap compared to insulators. This smaller energy gap allows electrons to be excited from the valence band to the conduction band more easily when subjected to external energy. Insulators, on the other hand, have a significantly larger band gap, making it difficult for electrons to move from the valence band to the conduction band, resulting in low conductivity.
Carbon in the diamond structure exhibits high resistivity similar to insulators due to its unique arrangement of atoms. In diamond, each carbon atom is covalently bonded to four neighboring carbon atoms in a tetrahedral structure. These strong covalent bonds create a wide energy band gap, which requires a significant amount of energy for electrons to transition from the valence band to the conduction band. As a result, diamond behaves as an insulator with high resistivity, as it does not readily allow the flow of electric current.
Learn more about semiconductors here:
brainly.com/question/1513558
#SPJ11
A proton is released such that it has an initial speed of 5.0 x 10 m/s from left to right across the page. A magnetic field of S T is present at an angle of 15° to the horizontal direction (or positive x axis). What is the magnitude of the force experienced by the proton?
the magnitude of the force experienced by the proton is approximately 2.07 x 10²-13 N.
To find the magnitude of the force experienced by the proton in a magnetic field, we can use the formula for the magnetic force on a moving charged particle:
F = q * v * B * sin(theta)
Where:
F is the magnitude of the force
q is the charge of the particle (in this case, the charge of a proton, which is 1.6 x 10^-19 C)
v is the velocity of the particle (5.0 x 10^6 m/s in this case)
B is the magnitude of the magnetic field (given as S T)
theta is the angle between the velocity vector and the magnetic field vector (15° in this case)
Plugging in the given values, we have:
F = (1.6 x 10^-19 C) * (5.0 x 10^6 m/s) * (S T) * sin(15°)
Now, we need to convert the magnetic field strength from T (tesla) to N/C (newtons per coulomb):
1 T = 1 N/(C*m/s)
Substituting the conversion, we get:
F = (1.6 x 10^-19 C) * (5.0 x 10^6 m/s) * (S N/(C*m/s)) * sin(15°)
The units cancel out, and we can simplify the expression:
F = 8.0 x 10^-13 N * sin(15°)
Using a calculator, we find:
F ≈ 2.07 x 10^-13 N
Therefore, the magnitude of the force experienced by the proton is approximately 2.07 x 10²-13 N.
To know more about Proton related question visit:
https://brainly.com/question/12535409
#SPJ11
A 1325 kg car moving north at 20.0 m/s hits a 2170 kg truck moving east at 15.0 m/s. After the collision, the vehicles stick The velocity of the wreckage after the collision is: Select one: a. 12.0 m/s[51 ∘
] b. 12.0 m/s[51 ∘
E of N] c. 4.20×10 4
m/s[51 ∘
] d. 4.20×10 4
m/s[51 ∘
N of E] Clear my choice
The velocity of the wreckage after the collision is approximately 16.90 m/s at an angle of 51°.
To solve this problem, we can use the principle of conservation of momentum. The total momentum before the collision should be equal to the total momentum after the collision.
Given:
Mass of the car (m1) = 1325 kg
Velocity of the car before collision (v1) = 20.0 m/s (north)
Mass of the truck (m2) = 2170 kg
Velocity of the truck before collision (v2) = 15.0 m/s (east)
Let's assume the final velocity of the wreckage after the collision is v_f.
Using the conservation of momentum:
(m1 * v1) + (m2 * v2) = (m1 + m2) * v_f
Substituting the given values:
(1325 kg * 20.0 m/s) + (2170 kg * 15.0 m/s) = (1325 kg + 2170 kg) * v_f
(26500 kg·m/s) + (32550 kg·m/s) = (3495 kg) * v_f
59050 kg·m/s = 3495 kg * v_f
Dividing both sides by 3495 kg:
v_f = 59050 kg·m/s / 3495 kg
v_f ≈ 16.90 m/s
The magnitude of the velocity of the wreckage after the collision is approximately 16.90 m/s. However, we also need to find the direction of the wreckage.
To find the direction, we can use trigonometry. The angle can be calculated using the tangent function:
θ = tan^(-1)(v1 / v2)
θ = tan^(-1)(20.0 m/s / 15.0 m/s)
θ ≈ 51°
Therefore, the velocity of the wreckage after the collision is approximately 16.90 m/s at an angle of 51°.
Visit here to learn more about velocity brainly.com/question/30559316
#SPJ11
Find the length of a simple pendulum that completes 12.0 oscillations in 18.0 s. Part 1 + Give the equation used for finding the length of a pendulum in terms of its period (T) and g. (Enter π as pi) l = Part 2 Find the length of the pendulum.
Part 1: The equation used for finding the length of a pendulum in terms of its period (T) and acceleration due to gravity (g) is:
l =[tex](g * T^2) / (4 * π^2)[/tex]
where:
l = length of the pendulum
T = period of the pendulum
g = acceleration due to gravity (approximately 9.8 m/s^2)
π = pi (approximately 3.14159)
Part 2: To find the length of the pendulum, we can use the given information that the pendulum completes 12.0 oscillations in 18.0 s.
First, we need to calculate the period of the pendulum (T) using the formula:
T = (total time) / (number of oscillations)
T = 18.0 s / 12.0 oscillations
T = 1.5 s/oscillation
Now we can substitute the known values into the equation for the length of the pendulum:
l =[tex](g * T^2) / (4 * π^2)[/tex]
l =[tex](9.8 m/s^2 * (1.5 s)^2) / (4 * (3.14159)^2)l ≈ 3.012 m[/tex]
Therefore, the length of the pendulum is approximately 3.012 meter.
learn about more simple pendulum here :
https://brainly.com/question/33265903
#SPJ11
Two identical positively charged spheres are apart from each
other at a distance 23.0 cm, and are experiencing an attraction
force of 4.25x10-9N. What is the magnitude of the charge
of each sphere, in
Since the spheres are identical, their charges can be assumed to be the same, so we can denote the charge on each sphere as q. By rearranging Coulomb's law to solve for the charge (q), we get q = sqrt((F *[tex]r^2[/tex]) / k).
The magnitude of the charge on each sphere can be determined using Coulomb's law, which relates the electrostatic force between two charged objects to the magnitude of their charges and the distance between them.
By rearranging the equation and substituting the given values, the charge on each sphere can be calculated.
Coulomb's law states that the electrostatic force between two charged objects is directly proportional to the product of their charges and inversely proportional to the square of the distance between them.
Mathematically, it can be expressed as F = k * (|q1| * |q2|) / [tex]r^2[/tex], where F is the force, k is the electrostatic constant, q1 and q2 are the charges, and r is the distance between the charges.
In this case, we have two identical positively charged spheres experiencing an attractive force. Since the spheres are identical, their charges can be assumed to be the same, so we can denote the charge on each sphere as q.
We are given the distance between the spheres (r = 23.0 cm) and the force of attraction (F = 4.25x[tex]10^-9[/tex] N). By rearranging Coulomb's law to solve for the charge (q), we get q = sqrt((F *[tex]r^2[/tex]) / k).
Learn more about magnitude of charge from the given link:
https://brainly.com/question/14437399
#SPJ11
a helicopter drop a package down at a constant speed 5m/s. When the package at 100m away from the helicopter, a stunt person fall out the helicopter. How long he catches the package? How fast is he?
In a planned stunt for a movie, a supply package with a parachute is dropped from a stationary helicopter and falls straight down at a constant speed of 5 m/s. A stuntperson falls out the helicopter when the package is 100 m below the helicopter. (a) Neglecting air resistance on the stuntperson, how long after they leave the helicopter do they catch up to the package? (b) How fast is the stuntperson going when they catch up? 2.) In a planned stunt for a movie, a supply package with a parachute is dropped from a stationary helicopter and falls straight down at a constant speed of 5 m/s. A stuntperson falls out the helicopter when the package is 100 m below the helicopter. (a) Neglecting air resistance on the stuntperson, how long after they leave the helicopter do they catch up to the package? (b) How fast is the stuntperson going when they catch up?
The stuntperson catches up to the package 20 seconds after leaving the helicopter.The stuntperson is traveling at a speed of 25 m/s when they catch up to the package.
To determine the time it takes for the stuntperson to catch up to the package, we can use the fact that the package is falling at a constant speed of 5 m/s. Since the stuntperson falls out of the helicopter when the package is 100 m below, it will take 20 seconds (100 m ÷ 5 m/s) for the stuntperson to reach that point and catch up to the package.
In this scenario, since the stuntperson falls straight down without any horizontal motion, they will have the same vertical velocity as the package. As the package falls at a constant speed of 5 m/s, the stuntperson will also have a downward velocity of 5 m/s.
When the stuntperson catches up to the package after 20 seconds, their velocity will still be 5 m/s, matching the speed of the package. Therefore, the stuntperson is traveling at a speed of 25 m/s (5 m/s downward speed plus the package's 20 m/s downward speed) when they catch up to the package.
Learn more about Speed
brainly.com/question/17661499
#SPJ11
What is the strength (in V/m) of the electric field between two parallel conducting plates separated by 1.60 cm and having a potential difference (voltage) between them of 1.95 10¹ V
The strength of the electric field between the two parallel conducting plates is approximately 12187.5 V/m.
To calculate the strength of the electric field (E) between two parallel conducting plates, we can use the formula :
E = V/d
where V is the potential difference (voltage) between the plates and d is the distance between the plates.
In this case, the potential difference is given as 1.95 * 10¹ V and the distance between the plates is 1.60 cm. However, it is important to note that the distance needs to be converted to meters before calculation.
1.60 cm is equal to 0.016 m (since 1 cm = 0.01 m).
Now we can substitute the values into the formula to calculate the electric field strength:
E = (1.95 * 10¹ V) / (0.016 m)
E ≈ 12187.5 V/m
Therefore, the strength of the electric field is 12187.5 V/m.
To learn more about electric field :
https://brainly.com/question/19878202
#SPJ11
A pitot tube is pointed into an air stream which has an ambient pressure of 100 kPa and temperature of 20°C. The pressure rise measured is 23 kPa. Calculate the air velocity. Take y = 1.4 and R = 287 J/kg K
Using the given values and equations, the air velocity calculated using the pitot tube is approximately 279.6 m/s.
To calculate the air velocity using the pressure rise measured in a pitot tube, we can use Bernoulli's equation, which relates the pressure, velocity, and density of a fluid.
The equation is given as:
P + 1/2 * ρ * V^2 = constant
P is the pressure
ρ is the density
V is the velocity
Assuming the pitot tube is measuring static pressure, we can rewrite the equation as:
P + 1/2 * ρ * V^2 = P0
Where P0 is the ambient pressure and ΔP is the pressure rise measured.
Using the ideal gas law, we can find the density:
ρ = P / (R * T)
Where R is the specific gas constant and T is the temperature in Kelvin.
Converting the temperature from Celsius to Kelvin:
T = 20°C + 273.15 = 293.15 K
Substituting the given values:
P0 = 100 kPa
ΔP = 23 kPa
R = 287 J/kg K
T = 293.15 K
First, calculate the density:
ρ = P0 / (R * T)
= (100 * 10^3 Pa) / (287 J/kg K * 293.15 K)
≈ 1.159 kg/m³
Next, rearrange Bernoulli's equation to solve for velocity:
1/2 * ρ * V^2 = ΔP
V^2 = (2 * ΔP) / ρ
V = √[(2 * ΔP) / ρ]
= √[(2 * 23 * 10^3 Pa) / (1.159 kg/m³)]
≈ 279.6 m/s
Therefore, the air velocity is approximately 279.6 m/s.
Learn more about air velocity:
https://brainly.com/question/28503178
#SPJ11
As an electromagnetic wave travels through free space, its speed can be increased by: Increasing its energy. Increasing its frequency. Increasing its momentum None of the above will increase its speed
The speed of an electromagnetic wave is determined by the permittivity and permeability of free space, and it is constant. As a result, none of the following can be used to increase its speed.
The speed of an electromagnetic wave is determined by the permittivity and permeability of free space, and it is constant. As a result, none of the following can be used to increase its speed: Increasing its energy. Increasing its frequency. Increasing its momentum. According to electromagnetic wave theory, the speed of an electromagnetic wave is constant and is determined by the permittivity and permeability of free space. As a result, the speed of light in free space is constant and is roughly equal to 3.0 x 10^8 m/s (186,000 miles per second).
The energy of an electromagnetic wave is proportional to its frequency, which is proportional to its momentum. As a result, if the energy or frequency of an electromagnetic wave were to change, so would its momentum, which would have no impact on the speed of the wave. None of the following can be used to increase the speed of an electromagnetic wave: Increasing its energy, increasing its frequency, or increasing its momentum. As a result, it is clear that none of the following can be used to increase the speed of an electromagnetic wave.
To know more about electromagnetic visit
https://brainly.com/question/32967158
#SPJ11
An object is moving along the x axis and an 18.0 s record of its position as a function of time is shown in the graph.
(a) Determine the position x(t)
of the object at the following times.
t = 0.0, 3.00 s, 9.00 s, and 18.0 s
x(t=0)=
x(t=3.00s)
x(t=9.00s)
x(t=18.0s)
(b) Determine the displacement Δx
of the object for the following time intervals. (Indicate the direction with the sign of your answer.)
Δt = (0 → 6.00 s), (6.00 s → 12.0 s), (12.0 s → 18.0 s), and (0 → 18.0 s)
Δx(0 → 6.00 s) = m
Δx(6.00 s → 12.0 s) = m
Δx(12.0 s → 18.0 s) = m
Δx(0 → 18.00 s) = Review the definition of displacement. m
(c) Determine the distance d traveled by the object during the following time intervals.
Δt = (0 → 6.00 s), (6.00 s → 12.0 s), (12.0 s → 18.0 s), and (0 → 18.0 s)
d(0 → 6.00 s) = m
d(6.00 s → 12.0 s) = m
d(12.0 s → 18.0 s) = m
d(0 → 18.0 s) = m
(d) Determine the average velocity vvelocity
of the object during the following time intervals.
Δt = (0 → 6.00 s), (6.00 s → 12.0 s), (12.0 s → 18.0 s), and (0 → 18.0 s)
vvelocity(0 → 6.00 s)
= m/s
vvelocity(6.00 s → 12.0 s)
= m/s
vvelocity(12.0 s → 18.0 s)
= m/s
vvelocity(0 → 18.0 s)
= m/s
(e) Determine the average speed vspeed
of the object during the following time intervals.
Δt = (0 → 6.00 s), (6.00 → 12.0 s), (12.0 → 18.0 s), and (0 → 18.0 s)
vspeed(0 → 6.00 s)
= m/s
vspeed(6.00 s → 12.0 s)
= m/s
vspeed(12.0 s → 18.0 s)
= m/s
vspeed(0 → 18.0 s)
= m/s
(a) x(t=0) = 10.0 m, x(t=3.00 s) = 5.0 m, x(t=9.00 s) = 0.0 m, x(t=18.0 s) = 5.0 m
(b) Δx(0 → 6.00 s) = -5.0 m, Δx(6.00 s → 12.0 s) = -5.0 m, Δx(12.0 s → 18.0 s) = 5.0 m, Δx(0 → 18.00 s) = -5.0 m
(c) d(0 → 6.00 s) = 5.0 m, d(6.00 s → 12.0 s) = 5.0 m, d(12.0 s → 18.0 s) = 5.0 m, d(0 → 18.0 s) = 15.0 m
(d) vvelocity(0 → 6.00 s) = -0.83 m/s, vvelocity(6.00 s → 12.0 s) = -0.83 m/s, vvelocity(12.0 s → 18.0 s) = 0.83 m/s, vvelocity(0 → 18.0 s) = 0.0 m/s
(e) vspeed(0 → 6.00 s) = 0.83 m/s, vspeed(6.00 s → 12.0 s) = 0.83 m/s, vspeed(12.0 s → 18.0 s) = 0.83 m/s, vspeed(0 → 18.0 s) = 0.83 m/s
(a) The position x(t) of the object at different times can be determined by reading the corresponding values from the given graph. For example, at t = 0.0 s, the position is 10.0 m, at t = 3.00 s, the position is 5.0 m, at t = 9.00 s, the position is 0.0 m, and at t = 18.0 s, the position is 5.0 m.
(b) The displacement Δx of the object for different time intervals can be calculated by finding the difference in positions between the initial and final times. Since displacement is a vector quantity, the sign indicates the direction. For example, Δx(0 → 6.00 s) = -5.0 m means that the object moved 5.0 m to the left during that time interval.
(c) The distance d traveled by the object during different time intervals can be calculated by taking the absolute value of the displacements. Distance is a scalar quantity and represents the total path length traveled. For example, d(0 → 6.00 s) = 5.0 m indicates that the object traveled a total distance of 5.0 m during that time interval.
(d) The average velocity vvelocity of the object during different time intervals can be calculated by dividing the displacement by the time interval. It represents the rate of change of position. The negative sign indicates the direction. For example, vvelocity(0 → 6.00 s) = -0.83 m/s means that, on average, the object is moving to the left at a velocity of 0.83 m/s during that time interval.
(e) The average speed vspeed of the object during different time intervals can be calculated by dividing the distance traveled by the time interval. Speed is
a scalar quantity and represents the magnitude of velocity. For example, vspeed(0 → 6.00 s) = 0.83 m/s means that, on average, the object is traveling at a speed of 0.83 m/s during that time interval.
Learn more about vvelocity
brainly.com/question/14492864
#SPJ11
Without the provided graph it's impossible to give specific answers, but the position can be found on the graph, displacement is the change in position, distance is the total path length, average velocity is displacement over time considering direction, and average speed is distance travelled over time ignoring direction.
Explanation:Unfortunately, without a visually provided graph depicting the movement of the object along the x-axis, it's impossible to specifically determine the position x(t) of the object at the given times, the displacement Δx of the object for the time intervals, the distance d traveled by the object during those time intervals, and the average velocity and speed during those time intervals.
However, please note that:
The position x(t) of the object can be found by examining the x-coordinate at a specific time on the graph.The displacement Δx is the change in position and can be positive, negative, or zero, depending on the movement.The distance d is always a positive quantity as it denotes the total path length covered by the object.The average velocity is calculated by dividing the displacement by the time interval, keeping the direction into account.The average speed is calculated by dividing the distance traveled by the time interval, disregarding the direction.Learn more about Physics of Motion here:https://brainly.com/question/33851452
#SPJ12
Given
Feed flow rate, F=100 kg/hr
Solvent flow rate, S=120 kg/hr
Mole fraction of acetone in feed, xF=0.35
Mole fraction of acetone in solvent, yS=0
M is the combined mixture of F and S.
M is the combined mixture of F and S.
xM is the mole fraction of acetone in M
xM =(FxF + SyS)/(F+S)
xM =(100*0.35+120*0)/(100+120)
xM =0.1591
Since 99% of acetone is to be removed,
Acetone present in feed = FxF = 100*0.35=35 kg/hr
99% goes into the extract and 1% goes into the raffinate.
Component mass balance:-
Therefore, acetone present in extract=Ey1= 0.99*35=34.65 kg/hr
Acetone present in Raffinate=RxN=0.01*35=0.35 kg/hr
Total mass balance:-
220=R+E
From total mass balance and component mass balance, by hit trial method, R=26.457 kg/hr
Hence, E=220-26.457=193.543 kg/hr
Hence, xN = 0.35/26.457=0.01323
Hence, y1 =34.65/193.543 = 0.179
Equilibrium data for MIK, water, acetone mixture is obtained from "Mass Transfer, Theory and Applications" by K.V.Narayanan.
From the graph, we can observe that 4 lines are required from the Feed to reach Rn passing through the difference point D.
Hence the number of stages required = 4
4 stages are required for the liquid-liquid extraction process to achieve the desired separation.
Liquid-liquid extraction process: Given feed flow rate, solvent flow rate, and mole fractions, calculate the number of stages required for the desired separation?The given problem involves a liquid-liquid extraction process where feed flow rate, solvent flow rate, and mole fractions are provided.
Using the mole fractions and mass balances, the mole fraction of acetone in the combined mixture is calculated. Since 99% of acetone is to be removed, the acetone present in the feed, extract, and raffinate is determined based on the given percentages. Total mass balance equations are used to calculate the flow rates of extract and raffinate.
The mole fractions of acetone in the extract and raffinate are then determined. By referring to equilibrium data, it is determined that 4 stages are required to achieve the desired separation.
Learn more about liquid-liquid extraction
brainly.com/question/31039834
#SPJ11
Sunlight strikes a piece of crown glass at an angle of incidence of 34.6°. Calculate the difference in the angle of refraction between a orange (610 nm) and a green (550 nm) ray within the glass.
The difference in the angle of refraction between the orange and green rays within the glass is 1.5°.
Given data: Angle of incidence = 34.6°.
Orange ray wavelength = 610 nm.
Green ray wavelength = 550 nm.
The formula for the angle of refraction is given as:
[tex]n_{1}\sin i = n_{2}\sin r[/tex]
Where, [tex]n_1[/tex] = Refractive index of air, [tex]n_2[/tex] = Refractive index of crown glass (given)
In order to find the difference in the angle of refraction between the orange and green rays within the glass, we can subtract the angle of refraction of the green ray from that of the orange ray.
So, we need to calculate the angle of refraction for both orange and green rays separately.
Angle of incidence = 34.6°.
We know that,
[tex]sin i = \frac{\text{Perpendicular}}{\text{Hypotenuse}}[/tex]
For the orange ray, wavelength, λ = 610 nm.
In general, the refractive index (n) of any medium can be calculated as:
[tex]n = \frac{\text{speed of light in vacuum}}{\text{speed of light in the medium}}[/tex]
[tex]\text{Speed of light in vacuum} = 3.0 \times 10^8 \text{m/s}[/tex]
[tex]\text{Speed of light in the medium} = \frac{c}{v} = \frac{\lambda f}{v}[/tex]
Where, f = Frequency, v = Velocity, c = Speed of light.
So, for the orange ray, we have,
[tex]v = \frac{\lambda f}{n} = \frac{(610 \times 10^{-9})(3.0 \times 10^8)}{1.52}[/tex]
=> [tex]1.234 \times 10^8\\\text{Angle of incidence, i = 34.6°.}\\\sin i = \sin 34.6 = 0.5577[/tex]
Substituting the values in the formula,[tex]n_{1}\sin i = n_{2}\sin r[/tex]
[tex](1) \ 0.5577 = 1.52 \* \sin r[/tex]
[tex]\sin r = 0.204[/tex]
Therefore, the angle of refraction of the orange ray in the crown glass is given by,
[tex]\sin^{-1}(0.204) = 12.2°[/tex]
Similarly, for the green ray, wavelength, λ = 550 nm.
Using the same formula, we get,
[tex]\text{Speed of light in the medium} = \frac{\lambda f}{n} = \frac{(550 \times 10^{-9})(3.0 \times 10^8)}{1.52} = 1.302 \times 10^8\\\text{Angle of incidence, i = 34.6°.}\\\sin i = \sin 34.6 = 0.5577[/tex]
Substituting the values in the formula,
[tex]n_{1}\sin i = n_{2}\sin r\\(1) \* 0.5577 = 1.52 \* \sin r\\\sin r = 0.185$$[/tex]
Therefore, the angle of refraction of the green ray in the crown glass is given by,
[tex]\sin^{-1}(0.185) = 10.7°[/tex]
Hence, the difference in the angle of refraction between the orange and green rays within the glass is:
[tex]12.2° - 10.7° = 1.5°[/tex]
Therefore, the difference in the angle of refraction between the orange and green rays within the glass is 1.5°.
Learn more about "Angle of Refraction" refer to the link : https://brainly.com/question/27932095
#SPJ11
A 1.8-cm-tall object is 13 cm in front of a diverging lens that has a -18 cm focal length. Part A Calculate the image position. Express your answer to two significant figures and include the appropria
The image position is approximately 10 cm in front of the diverging lens.
To calculate the image position, we can use the lens equation:
1/f = 1/di - 1/do,
where f is the focal length of the lens, di is the image distance, and do is the object distance.
f = -18 cm (negative sign indicates a diverging lens)
do = -13 cm (negative sign indicates the object is in front of the lens)
Substituting the values into the lens equation, we have:
1/-18 = 1/di - 1/-13.
Simplifying the equation gives:
1/di = 1/-18 + 1/-13.
Finding the common denominator and simplifying further yields:
1/di = (-13 - 18)/(-18 * -13),
= -31/-234,
= 1/7.548.
Taking the reciprocal of both sides of the equation gives:
di = 7.548 cm.
Therefore, the image position is approximately 7.55 cm or 7.5 cm (rounded to two significant figures) in front of the diverging lens.
To learn more about diverging lens
Click here brainly.com/question/28348284
#SPJ11
A 1.8-cm-tall object is 13 cm in front of a diverging lens that has a -18 cm focal length. Part A Calculate the image position. Express your answer to two significant figures and include the appropriate values
The magnetic field strength B around a long current-carrying wire is given byQuestion 15 options:
B=μo I/(2πr).
B=μo I x (2πr)
B=μo I/(2r).
Magnetic field strength refers to the intensity or magnitude of the magnetic field at a particular point in space. The magnetic field strength B around a long current-carrying wire is given by, B = μo I / (2πr).
The magnetic field strength (B) around a long current-carrying wire can be determined using Ampere's Law. According to Ampere's Law, the line integral of the magnetic field B around a closed loop is equal to the product of the permeability of free space (μo) and the total electric current (I) passing through the surface bounded by the loop.
Mathematically, Ampere's Law can be expressed as:
∮B ⋅ dl = μo I
B = (μo I) / (2πr)
where:
B = magnetic field strength
μo = permeability of free space (a constant value)
I = current in the wire
r = distance from the wire
The correct option is B = μo I / (2πr), as it matches the formula derived from Ampere's Law.
To know more about magnetic field, visit;
https://brainly.com/question/30236241
#SPJ11
If
a Hamiltonian commutes with the parity operator, when could its
eigenstate not be a parity eigenstate?
When a Hamiltonian commutes with the parity operator, it means that they share a set of common eigenstates. The parity operator reverses the sign of the spatial coordinates, effectively reflecting the system about a specific point.
In quantum mechanics, eigenstates of the parity operator are characterized by their symmetry properties under spatial inversion.
Since the Hamiltonian and parity operator have common eigenstates, it implies that the eigenstates of the Hamiltonian also possess definite parity. In other words, these eigenstates are either symmetric or antisymmetric under spatial inversion.
However, it is important to note that while the eigenstates of the Hamiltonian can be parity eigenstates, not all parity eigenstates need to be eigenstates of the Hamiltonian.
There may exist additional states that possess definite parity but do not satisfy the eigenvalue equation of the Hamiltonian.
Therefore, if a Hamiltonian commutes with the parity operator, its eigenstates will always be parity eigenstates, but there may be additional parity eigenstates that do not correspond to eigenstates of the Hamiltonian.
Learn more about quantum mechanics from the given link:
https://brainly.com/question/23780112
#SPJ11
What is the frequency of the most intense radiation emitted by your body? Assume a skin temperature of 95 °F. Express your answer to three significant figures.
The frequency of the most intense radiation emitted by your body is approximately 3.19 × 10^13 Hz.
To determine the frequency of the most intense radiation emitted by your body, we can use Wien's displacement law, which relates the temperature of a black body to the wavelength at which it emits the most intense radiation.
The formula for Wien's displacement law is:
λ_max = (b / T)
Where λ_max is the wavelength of maximum intensity, b is Wien's displacement constant (approximately 2.898 × 10^-3 m·K), and T is the temperature in Kelvin.
First, let's convert the skin temperature of 95 °F to Kelvin:
T = (95 + 459.67) K ≈ 308.15 K
Now, we can calculate the wavelength of maximum intensity using Wien's displacement law:
λ_max = (2.898 × 10^-3 m·K) / 308.15 K
Calculating this expression, we find:
λ_max ≈ 9.41 × 10^-6 m
To find the frequency, we can use the speed of light formula:
c = λ * f
Where c is the speed of light (approximately 3 × 10^8 m/s), λ is the wavelength, and f is the frequency.
Rearranging the formula to solve for frequency:
f = c / λ_max
Substituting the values, we have:
f ≈ (3 × 10^8 m/s) / (9.41 × 10^-6 m)
Calculating this expression, we find:
f ≈ 3.19 × 10^13 Hz
Therefore, the frequency of the most intense radiation emitted by your body is approximately 3.19 × 10^13 Hz.
Learn more about wavelength:
https://brainly.com/question/10750459
#SPJ11
Astronomers at Caltech have used mathematical modeling of Pluto and Neptune's orbits to calculate the location of Planet X, the hypothetical ninth planet in the Solar System. (Pluto is not a Planet!) Unfortunately it is so far away from the Sun that it cannot be seen by any of our current telescopes, so NASA has Jorge (an Electrical Engineer at JPL) design an ion propulsion system for the 425 kg spacecraft that will be sent to find it. If Jorge's propulsion system accelerates singly ionized Argon through a 35 kV potential, and the propulsion is fired when the spacecraft is at rest, what will be the spacecraft's speed (in km/s) after it
expels all of its 20 kg supply of Argon fuel?
The spacecraft's speed after it expels all of its 20 kg supply of Argon fuel will be 0.017859 km/s.
The spacecraft’s speed after it expels all of its 20 kg supply of Argon fuel can be calculated as follows:
First, let's calculate the energy that one singly ionized Argon ion can acquire.
Potential energy (PE) = Charge on the ion (q) × Potential difference (V)
PE = 1 × 35 kV = 35 kJ
Thus, the kinetic energy (KE) that one singly ionized Argon ion can acquire is
KE = PE = 35 kJ
But we know that Kinetic energy (KE) = 1/2 mv²where m is the mass of the ion and v is its speed.
On re-arranging the above equation,
v = √(2KE/m)
Speed of the spacecraft after expelling all its fuel can be calculated by finding the speed of the individual ions and then applying the principle of conservation of momentum. So, let's calculate the speed of the ions using the above equation.
v = √(2KE/m) = √[2 × 35,000/(6.63 × 10⁻²⁶)] = 1,142,136.809 m/s
Now, the momentum of one Argon ion can be calculated as:
momentum = mass × velocity
momentum = 6.63 × 10⁻²⁶ × 1,142,136.809 = 7.584 kg m/s
Now let's apply the principle of conservation of momentum to calculate the spacecraft's speed after it expels all of its 20 kg supply of Argon fuel.
As per the principle of conservation of momentum:
Initial momentum = Final momentum
The spacecraft is initially at rest. So, its initial momentum is zero. Let's assume the speed of the spacecraft after expelling all of its 20 kg supply of Argon fuel to be v₁.
momentum of expelled Argon ions = momentum of spacecraft after the propellant is completely expelled
20,000 g × (7.584 kg m/s) = (425,000 g) v₁
7.584 × 10³ = 425 × 10³ × v₁
v₁ = 0.017859 km/s or 17.859 m/s or 64.2924 km/h
Therefore, the spacecraft's speed after it expels all of its 20 kg supply of Argon fuel will be 0.017859 km/s.
Learn more about spacecraft’s speed https://brainly.com/question/29727760
#SPJ11
A muon with a lifetime of 2 × 10−6 second in its frame of reference is created in the upper atmosphere with a velocity of 0.998 c toward the Earth. What is the lifetime of this muon as mea- sured by an observer on the Earth? 1.T =3×10−5 s 2.T =3×10−6 s 3.T =3×10−4 s 4.T =3×10−3 s 5.T =3×10−2 s
The lifetime of the muon as measured by an observer on Earth is approximately 3 × 10^−6 seconds (Option 2).
When the muon is moving at a velocity of 0.998c towards the Earth, time dilation occurs due to relativistic effects, causing the muon's lifetime to appear longer from the Earth's frame of reference.
Time dilation is a phenomenon predicted by Einstein's theory of relativity, where time appears to slow down for objects moving at high velocities relative to an observer. The formula for time dilation is T' = T / γ, where T' is the measured lifetime of the muon, T is the proper lifetime in its frame of reference, and γ (gamma) is the Lorentz factor.
In this case, the Lorentz factor can be calculated using the formula γ = 1 / sqrt(1 - (v^2 / c^2)), where v is the velocity of the muon (0.998c) and c is the speed of light. Plugging in the values, we find γ ≈ 14.14.
By applying time dilation, T' = T / γ, we get T' = 2 × 10^−6 s / 14.14 ≈ 1.415 × 10^−7 s. However, we need to convert this result to the proper lifetime as measured by the Earth observer. Since the muon is moving towards the Earth, its lifetime appears longer due to time dilation. Therefore, the measured lifetime on Earth is T' = 1.415 × 10^−7 s + 2 × 10^−6 s = 3.1415 × 10^−6 s ≈ 3 × 10^−6 s.
Hence, the lifetime of the muon as measured by an observer on Earth is approximately 3 × 10^−6 seconds (Option 2).
Learn more about muon here:
brainly.com/question/30549179
#SPJ11
5) A beaker contains 2 grams of ice at a temperature of -10°C. The mass of the beaker may be ignored. Heat is supplied to the beaker at a constant rate of 2200J/minute. The specific heat of ice is 2100 J/kgk and the heat of fusion for ice is 334 x103 J/kg. How much time passes before the ice starts to melt? (8 pts)
The time it takes for the ice to start melting is approximately 8.22 minutes.
To calculate the time before the ice starts to melt, we need to consider the heat required to raise the temperature of the ice from -10°C to its melting point (0°C) and the heat of fusion required to convert the ice at 0°C to water at the same temperature.
First, we calculate the heat required to raise the temperature of 2 grams of ice from -10°C to 0°C using the specific heat formula Q = m * c * ΔT, where Q is the heat, m is the mass, c is the specific heat, and ΔT is the change in temperature. Substituting the given values, we get Q1 = 2 g * 2100 J/kg°C * (0°C - (-10°C)) = 42000 J.
Next, we calculate the heat of fusion required to convert the ice to water at 0°C using the formula Q = m * Hf, where Q is the heat, m is the mass, and Hf is the heat of fusion. Substituting the given values, we get Q2 = 2 g * 334 x 10³ J/kg = 668000 J.
Now, we sum up the heat required for temperature rise and the heat of fusion: Q_total = Q1 + Q2 = 42000 J + 668000 J = 710000 J.
Finally, we divide the total heat by the heat supplied per minute to obtain the time: t = Q_total / (2200 J/minute) ≈ 322.73 minutes ≈ 8.22 minutes.
Therefore, it takes approximately 8.22 minutes for the ice to start melting when heat is supplied at a constant rate of 2200 J/minute.
learn more about heat of fusion here:
https://brainly.com/question/30403515
#SPJ11
Halley's comet, which passes around the Sun every 76 years, has ^1an elliptical orbit. When closest to the Sun (perihelion) it is at a distance of 8.823 x 100 m and moves with a speed of 54.6 km/s. When farthest from the Sun (aphelion) it is at a distance of 6.152 x 10¹^12 m and moves with a speed of 783 m/s. Find the angular momentum of Halley's comet at perihelion. (Take the mass of Halley's comet to be 9.8 x 10^14 kg.) Express your answer using two significant figures. Find the angular momentum of Halley's comet at aphellon Express your answer using two significant figures.
Halley's comet, which passes around the Sun every 76 years, has ^1an elliptical orbit. When closest to the Sun (perihelion) it is at a distance of 8.823 x 10¹⁰ m and moves with a speed of 54.6 km/s. When farthest from the Sun (aphelion) it is at a distance of 6.152 x 10¹² m and moves with a speed of 783 m/s.
The angular momentum of Halley's comet at perihelion is 4.96 x 10²⁸ kg m²/s.
The angular momentum of Halley's comet at aphelion is 4.53 x 10²⁸ kg m²/s.
To find the angular momentum of Halley's comet at perihelion, we can use the formula for angular momentum:
Angular momentum (L) = mass (m) x velocity (v) x radius (r)
Given:
Mass of Halley's comet (m) = 9.8 x 10¹⁴ kg
Velocity at perihelion (v) = 54.6 km/s = 54,600 m/s
Distance at perihelion (r) = 8.823 x 10¹⁰C m
Angular momentum at perihelion (L) = (9.8 x 10¹⁴ kg) x (54,600 m/s) x (8.823 x 10¹⁰ m)
≈ 4.96 x 10²⁸ kg m²/s
Therefore, the angular momentum of Halley's comet at perihelion is approximately 4.96 x 10²⁸ kg m²/s.
To find the angular momentum of Halley's comet at aphelion, we can use the same formula:
Angular momentum (L) = mass (m) x velocity (v) x radius (r)
Given:
Mass of Halley's comet (m) = 9.8 x 10¹⁴ kg
Velocity at aphelion (v) = 783 m/s
Distance at aphelion (r) = 6.152 x 10¹² m
Angular momentum at aphelion (L) = (9.8 x 10¹⁴ kg) x (783 m/s) x (6.152 x 10¹² m)
≈ 4.53 x 10²⁸ kg m²/s
Therefore, the angular momentum of Halley's comet at aphelion is approximately 4.53 x 10²⁸ kg m²/s.
To know more about angular momentum here
https://brainly.com/question/30656024
#SPJ4
For a certain choice of origin, the third antinode in a standing wave occurs at x3=4.875m while the 10th antinode occurs at x10=10.125 m. The wavelength, in m, is: 1.5 O None of the listed options 0.75 0.375
The third antinode in a standing wave occurs at x3=4.875 m and the 10th antinode occurs at x10=10.125 m hence the wavelength is 0.75.
Formula used:
wavelength (n) = (xn - x3)/(n - 3)where,n = 10 - 3 = 7xn = 10.125m- 4.875m = 5.25 m
wavelength(n) = (5.25)/(7)wavelength(n) = 0.75m
Therefore, the wavelength, in m, is 0.75.
Given, the third antinode in a standing wave occurs at x3=4.875 m and the 10th antinode occurs at x10=10.125 m.
We have to find the wavelength, in m. The wavelength is the distance between two consecutive crests or two consecutive troughs. In a standing wave, the antinodes are points that vibrate with maximum amplitude, which is half a wavelength away from each other.
The third antinode in a standing wave occurs at x3=4.875m. Let us assume that this point corresponds to a crest. Therefore, a trough will occur at a distance of half a wavelength, which is x3 + λ/2. Let us assume that the 10th antinode in a standing wave occurs at x10=10.125m.
Let us assume that this point corresponds to a crest. Therefore, a trough will occur at a distance of half a wavelength, which is x10 + λ/2.
Let us consider the distance between the two troughs:
(x10 + λ/2) - (x3 + λ/2) = x10 - x3λ = (x10 - x3) / (10-3)λ = (10.125 - 4.875) / (10-3)λ = 5.25 / 7λ = 0.75m
Therefore, the wavelength, in m, is 0.75.
To know more about antinode visit
brainly.com/question/3838585
#SPJ11