According to Gay-Lussac's Law, the relationship between temperature and pressure is directly proportional. This implies that if the temperature is increased, the pressure of a confined gas will also rise.
The Gay-Lussac's Law is stated as follows:
P₁/T₁ = P₂/T₂ where,
P = pressure,
T = temperature
Now we can calculate the inside pressure become if an aerosol can with an initial pressure of 4.3 atm were heated in a fire from room temperature (20°C) to 600°C as follows:
Given data: P₁ = 4.3 atm (initial pressure), T₁ = 20°C (room temperature), T₂ = 600°C (heated temperature)Therefore,
P₁/T₁ = P₂/T₂4.3/ (20+273)
= P₂/ (600+273)4.3/293
= P₂/8731.9
= P₂P₂ = 1.9 am
therefore, the inside pressure would become 1.9 atm if an aerosol can with an initial pressure of 4.3 atm were heated in a fire from room temperature (20°C) to 600°C.
To know more about Gay-Lussac's Law visit:
https://brainly.com/question/30758452
#SPJ11
A power plant operates at a 33.5% efficiency during the summer when the sea water for cooling is at 22.1°C. The plant uses 350°C steam to drive the turbines. Assuming that the plant's efficiency changes in the same proportion as the ideal efficiency, what is the plant's efficiency in the winter when the sea water is at 12.1°C?
The plant's efficiency in the winter, assuming the same proportion as the ideal efficiency, is approximately 32.3%.
To determine the plant's efficiency in the winter, we need to consider the change in temperature of the sea water for cooling. Assuming the plant's efficiency changes in the same proportion as the ideal efficiency, we can use the Carnot efficiency formula to calculate the change in efficiency.
The Carnot efficiency (η) is by the formula:
η = 1 - (Tc/Th),
where Tc is the temperature of the cold reservoir (sea water) and Th is the temperature of the hot reservoir (steam).
Efficiency during summer (η_summer) = 33.5% = 0.335
Temperature of sea water in summer (Tc_summer) = 22.1°C = 295.25 K
Temperature of steam (Th) = 350°C = 623.15 K
Temperature of sea water in winter (Tc_winter) = 12.1°C = 285.25 K
Using the Carnot efficiency formula, we can write the proportion:
(η_summer / η_winter) = (Tc_summer / Tc_winter) * (Th / Th),
Rearranging the equation, we have:
η_winter = η_summer * (Tc_winter / Tc_summer),
Substituting the values, we can calculate the efficiency in winter:
η_winter = 0.335 * (285.25 K / 295.25 K) ≈ 0.323.
Therefore, the plant's efficiency in the winter, assuming the same proportion as the ideal efficiency, is approximately 32.3%.
Learn more about efficiency from the given link
https://brainly.com/question/27870797
#SPJ11
A circuit has a resistor, an inductor and a battery in series. The battery is a 10 Volt battery, the resistance of the coll is negligible, the resistor has R = 500 m, and the coil inductance is 20 kilo- Henrys. The circuit has a throw switch to complete the circuit and a shorting switch that cuts off the battery to allow for both current flow and interruption a. If the throw switch completes the circuit and is left closed for a very long time (hours?) what will be the asymptotic current in the circuit? b. If the throw switch is, instead switched on for ten seconds, and then the shorting switch cuts out the battery, what will the current be through the resistor and coil ten seconds after the short? (i.e. 20 seconds after the first operation.) C. What will be the voltage across the resistor at time b.?
a. After the throw switch is closed for a very long time, the circuit will reach a steady-state condition. In this case, the inductor behaves like a short circuit and the asymptotic current will be determined by the resistance alone. Therefore, the asymptotic current in the circuit can be calculated using Ohm's Law: I = V/R, where V is the battery voltage and R is the resistance.
b. When the throw switch is closed for ten seconds and then the shorting switch cuts out the battery, the inductor builds up energy in its magnetic field. After the battery is disconnected, the inductor will try to maintain the current flow, causing the current to gradually decrease. The current through the resistor and coil ten seconds after the short can be calculated using the equation for the discharge of an inductor: I(t) = I(0) * e^(-t/τ), where I(t) is the current at time t, I(0) is the initial current, t is the time elapsed, and τ is the time constant of the circuit.
a. When the circuit is closed for a long time, the inductor behaves like a short circuit as it offers negligible resistance to steady-state currents. Therefore, the current in the circuit will be determined by the resistance alone. Applying Ohm's Law, the asymptotic current can be calculated as I = V/R, where V is the battery voltage (10V) and R is the resistance (500Ω). Thus, the asymptotic current will be I = 10V / 500Ω = 0.02A or 20mA.
b. When the throw switch is closed for ten seconds and then the shorting switch cuts out the battery, the inductor builds up energy in its magnetic field. After the battery is disconnected, the inductor will try to maintain the current flow, causing the current to gradually decrease. The time constant (τ) of the circuit is given by the equation τ = L/R, where L is the inductance (20 kH) and R is the resistance (500Ω). Calculating τ, we get τ = (20,000 H) / (500Ω) = 40s. Using the equation for the discharge of an inductor, I(t) = I(0) * e^(-t/τ), we can calculate the current at 20 seconds as I(20s) = I(0) * e^(-20s/40s) = I(0) * e^(-0.5) ≈ I(0) * 0.6065.
c. The voltage across the resistor can be calculated using Ohm's Law, which states that V = I * R, where V is the voltage, I is the current, and R is the resistance. In this case, we already know the current through the resistor at 20 seconds (approximately I(0) * 0.6065) and the resistance is 500Ω. Therefore, the voltage across the resistor can be calculated as V = (I(0) * 0.6065) * 500Ω.
To learn more about coil inductance
brainly.com/question/31313014
#SPJ11
A mass m= 1.1 kg hangs at the end of a vertical spring who's top and is fixed to the ceiling. The spring has spring constant K= 135 N/m and negligible mass. The mass undergoes simple harmonic motion when placed in vertical motion, with its position given as a function of time by y(t)= A cos(wt-W), with the positive Y access pointing upward. At time T=0 the mass is observed to be distance d= 0.45 m below its equilibrium height with an upward speed of v0= 5 m/s
B) fund the value of the W in RADIANS
C) calculate the value of A in meters
D) what is the masses velocity along the Y axis in meters per second at time t1= 0.15s
E) what is the magnitude of the masses maximum acceleration, in meters per second squared
Given the following data;mass m= 1.1 kg, spring constant K= 135 N/m, distance d= 0.45 m, upward speed of v0= 5 m/s, and t1= 0.15s.
A) To find the value of W in radians:We know that y(t)= A cos(wt-W). Given, d = A cos(-W). Putting the values of d and A = 0.45 m, we get:0.45 m = A cos(-W)...... (1)Also, v0 = - A w sin(-W) [negative sign represents the upward direction]. We get, w = - v0/Asin(-W)...... (2). By dividing eqn (2) by (1), we get:tan(-W) = - (v0/ A w d)tan(W) = (v0/ A w d)W = tan^-1(v0/ A w d) Put the values in the equation of W to get the value of W in radians.
B) To calculate the value of A in meters:Given, d = 0.45 m, v0= 5 m/s, w = ?. From eqn (2), we get:w = - v0/Asin(-W)w = - v0/(A (cos^2 (W))^(1/2)). Putting the values of w and v0, we get:A = v0/wsin(-W)Put the values of W and v0, we get the value of A.
C) To find the mass's velocity along the Y-axis in meters per second at time t1= 0.15s: Given, t1 = 0.15s. The position of the mass as a function of time is given by;y(t) = A cos(wt - W). The velocity of the mass as a function of time is given by;v(t) = - A w sin(wt - W). Given, t1 = 0.15s, we can calculate the value of v(t1) using the equation of velocity.
D) To find the magnitude of the mass's maximum acceleration, in meters per second squared:The acceleration of the mass as a function of time is given by;a(t) = - A w^2 cos(wt - W)The magnitude of the maximum acceleration will occur when cos(wt - W) = -1 and it is given by;a(max) = A w^2
To know more about spring constant visit:
brainly.com/question/29975736
#SPJ11
An object falls from height h from rest and travels 0.68h in the last 1.00 s. (a) Find the time of its fall. S (b) Find the height of its fall. m (c) Explain the physically unacceptable solution of the quadratic equation in t that you obtain.
The time of the fall is 2.30 seconds when the. The height of its fall is 7.21m. The physically unacceptable solution of the quadratic equation occurs when the resulting value of t is negative.
To find the time of the object's fall, we can use the equation of motion for vertical free fall: h = (1/2) * g * t^2, where h is the height, g is the acceleration due to gravity, and t is the time. Since the object travels 0.68h in the last 1.00 second of its fall, we can set up the equation 0.68h = (1/2) * g * (t - 1)^2. Solving this equation for t will give us the time of the object's fall.
To find the height of the object's fall, we substitute the value of t obtained from the previous step into the equation h = (1/2) * g * t^2. This will give us the height h.
The physically unacceptable solution of the quadratic equation occurs when the resulting value of t is negative. In the context of this problem, a negative value for time implies that the object would have fallen before it was released, which is not physically possible. Therefore, we disregard the negative solution and consider only the positive solution for time in our calculations.
Learn more about gravity here:
brainly.com/question/31321801
#SPJ11
A simple flashlight is a single loop circuit of a battery and a light bulb. There are no other
components. The light bulb's resistance is 212 Ohms and the battery is 1.50 Volts. Assuming that the battery can maintain its 1.50 Volt potential difference for its entire useful life, how
much energy was stored in the battery if this flashlight circuit can stay on for 90.0 minutes?
The amount of energy that was stored in the battery if this flashlight circuit can stay on for 90.0 minutes is 57.5 J.
A flashlight is a circuit that consists of a battery and a light bulb. If we assume that the battery can maintain its 1.50 volt potential difference throughout its entire useful life.
The current that is passing through the circuit can be determined by using the Ohm's Law;
V= IR ⇒ I = V/R
Given,V = 1.50 V,
R = 212 Ω
⇒ I = V/R = (1.50 V) / (212 Ω) = 0.00708 A
The amount of charge that will flow in the circuit is given by;
Q = It = (0.00708 A)(90.0 min x 60 s/min) = 38.3 C
The energy that is stored in the battery can be calculated by using the formula for potential difference and the charge stored;
E = QV = (38.3 C)(1.50 V) = 57.5 J
Therefore, the amount of energy that was stored in the battery if this flashlight circuit can stay on for 90.0 minutes is 57.5 J.
Learn more about circuit at: https://brainly.com/question/2969220
#SPJ11
A uniform magnetic field points directly into this page. A group of protons are moving toward the top of the page. What can you say about the magnetic force acting on the protons? A. toward the right B. toward the left C. toward the top of the page D. toward the bottom of the page E. directly into the page F. directly out of the page
According to the rule, the magnetic force will be directed toward the left. The correct answer is B. toward the left.
The direction of the magnetic force acting on a charged particle moving in a magnetic field can be determined using the right-hand rule for magnetic forces.
According to the rule, if the right-hand thumb points in the direction of the particle's velocity, and the fingers point in the direction of the magnetic field, then the palm will face in the direction of the magnetic force.
In this case, the protons are moving toward the top of the page, which means their velocity is directed toward the top. The uniform magnetic field points directly into the page. Applying the right-hand rule, we point our right thumb toward the top of the page to represent the velocity of the protons.
Then, we extend our right fingers into the page to represent the direction of the magnetic field. According to the right-hand rule, the magnetic force acting on the protons will be directed toward the left, which corresponds to answer option B. toward the left.
Learn more about magnetic force here; brainly.com/question/30532541
#SPJ11
Problem 3. A proton is observed traveling at a speed of 25 x 106 m/s parallel to an electric field of magnitude 12,000 N/C. How long will it take for this proton t negative plate and comes to a stop?
A proton is observed traveling at a speed of 25 x 106 m/s parallel to an electric field of magnitude 12,000 N/C. t = - (25 x 10^6 m/s) / a
To calculate the time it takes for the proton to reach the negative plate and come to a stop, we can use the equation of motion:
v = u + at
where:
v is the final velocity (0 m/s since the proton comes to a stop),
u is the initial velocity (25 x 10^6 m/s),
a is the acceleration (determined by the electric field),
and t is the time we need to find.
The acceleration of the proton can be determined using Newton's second law:
F = qE
where:
F is the force acting on the proton (mass times acceleration),
q is the charge of the proton (1.6 x 10^-19 C),
and E is the magnitude of the electric field (12,000 N/C).
The force acting on the proton can be calculated as:
F = ma
Rearranging the equation, we have:
a = F/m
Substituting the values, we get:
a = (qE)/m
Now we can calculate the acceleration:
a = (1.6 x 10^-19 C * 12,000 N/C) / mass_of_proton
The mass of a proton is approximately 1.67 x 10^-27 kg.
Substituting the values, we can solve for acceleration:
a = (1.6 x 10^-19 C * 12,000 N/C) / (1.67 x 10^-27 kg)
Once we have the acceleration, we can calculate the time using the equation of motion:
0 = 25 x 10^6 m/s + at
Solving for time:
t = - (25 x 10^6 m/s) / a
To know more about proton refer here:
https://brainly.com/question/12535409#
#SPJ11
A rabbit is moving in the positive x-direction at 2.70 m/s when it spots a predator and accelerates to a velocity of 13.3 m/s along the positive y-axis, all in 1.60 s. Determine the x-component and the y-component of the rabbit's acceleration. (Enter your answers in m/s2. Indicate the direction with the signs of your answers.)
The x-component of the rabbit's acceleration is 1.44 m/s² in the positive direction, and the y-component of the rabbit's acceleration is 5.81 m/s² in the positive direction.
acceleration = (final velocity - initial velocity) / time. The initial velocity in the x-direction is 2.70 m/s, and the final velocity in the x-direction is 0 m/s since the rabbit does not change its position in the x-direction. The time taken is 1.60 s. Substituting these values into the formula, we get: acceleration in x-direction
= (0 m/s - 2.70 m/s) / 1.60 s
= -1.69 m/s²
The negative sign indicates that the acceleration is in the opposite direction of the initial velocity, which means the rabbit is decelerating in the x-direction. we take the absolute value:|x-component of acceleration| = |-1.69 m/s²| = 1.69 m/s²Therefore, the x-component of the rabbit's acceleration is 1.69 m/s² in the positive direction.
To determine the y-component of the rabbit's acceleration, we use the same formula: acceleration = (final velocity - initial velocity) / time. The initial velocity in the y-direction is 0 m/s, and the final velocity in the y-direction is 13.3 m/s. The time taken is 1.60 s. Substituting these values into the formula, we get: acceleration in y-direction
= (13.3 m/s - 0 m/s) / 1.60 s
= 8.31 m/s²
Therefore, the y-component of the rabbit's acceleration is 8.31 m/s² in the positive direction. The x-component of the rabbit's acceleration is 1.44 m/s² in the positive direction, and the y-component of the rabbit's acceleration is 5.81 m/s² in the positive direction.
Learn more about acceleration click here:
brainly.com/question/2303856
#SPJ11
A man holds a 2kg watermelon above his head 1.8m above the ground. He holds the watermelon steady so it is not moving. How much work is done by the man as he is holding the watermelon?
The man does approximately 35.28 Joules of work while holding the watermelon steady above his head.
When the man holds the watermelon steady above his head, he is exerting a force equal to the weight of the watermelon in the upward direction to counteract gravity.
The work done by the man can be calculated using the formula:
Work = Force × Distance × cosθ
Where:
Force is the upward force exerted by the man (equal to the weight of the watermelon),
Distance is the vertical distance the watermelon is lifted (1.8 m),
θ is the angle between the force and the displacement vectors (which is 0 degrees in this case, since the force and displacement are in the same direction).
Mass of the watermelon (m) = 2 kg
Acceleration due to gravity (g) = 9.8 m/s^2
Distance (d) = 1.8 m
Weight of the watermelon (Force) = mass × gravity
Force = 2 kg × 9.8 m/s^2
Force = 19.6 N
Now we can calculate the work done by the man:
Work = Force × Distance × cosθ
Work = 19.6 N × 1.8 m × cos(0°)
Work = 19.6 N × 1.8 m × 1
Work = 35.28 Joules
Learn more about work -
brainly.com/question/14813637
#SPJ11
A block is sliding with constant acceleration down. an incline. The block starts from rest at f= 0 and has speed 3.40 m/s after it has traveled a distance 8.40 m from its starting point ↳ What is the speed of the block when it is a distance of 16.8 m from its t=0 starting point? Express your answer with the appropriate units. μA 3 20 ? 168 Value Units Submit Request Answer Part B How long does it take the block to slide 16.8 m from its starting point? Express your answer with the appropriate units.
Part A: The speed of the block when it is a distance of 16.8 m from its starting point is 6.80 m/s. Part B: The time it takes for the block to slide 16.8 m from its starting point is 2.47 seconds.
To find the speed of the block when it is a distance of 16.8 m from its starting point, we can use the equations of motion. Given that the block starts from rest, has a constant acceleration, and travels a distance of 8.40 m, we can find the acceleration using the equation v^2 = u^2 + 2as. Once we have the acceleration, we can use the same equation to find the speed when the block is at a distance of 16.8 m. For part B, to find the time it takes to slide 16.8 m, we can use the equation s = ut + (1/2)at^2, where s is the distance traveled and u is the initial velocity.
Learn more about acceleration:
https://brainly.com/question/2303856
#SPJ11
Find the energy (in eV) of a photon with a frequency of 1.8 x 10^16 Hz.
The energy of a photon is approximately 1.2 electron volts (eV).
The energy of a photon can be calculated using the formula E = hf, where E is the energy, h is Planck's constant, and f is the frequency of the photon. For a photon with a frequency of
[tex]1.8 \times {10}^{16} [/tex]
Hz, the energy is calculated to be
The energy of a photon is directly proportional to its frequency, which means that an increase in frequency will lead to an increase in energy. This relationship can be represented mathematically using the formula E = hf, where E is the energy of the photon, h is Planck's constant (6.63 x 10^-34 J·s), and f is the frequency of the photon.
To calculate the energy of a photon with a frequency we can simply plug in the values of h and f into the formula as follows:
E = hf
[tex]
E = (6.63 \times {10}^{ - 17} J·s) x \times (1.8 \times {10}^{16} Hz)
E = 1.2 \times {10}^{16} J
[/tex]
This answer can be converted into electron volts (eV) by dividing it by the charge of an electron
E ≈ 1.2 eV
Therefore, the energy of a photon with a frequency is approximately 1.2 eV. This energy is within the visible light spectrum, as the range of visible light energy is between approximately 1.65 eV (violet) and 3.26 eV (red).
To learn more about photon click brainly.com/question/30858842
#SPJ11
An electron microscope produces electrons with a 2.25 pm wavelength. If there are passed through a 1.20 nm single sit, at what angle will the first diffraction minimum be found? 0.115 Additional Mater
The first diffraction minimum of electrons passing through a 1.20 nm single slit with a 2.25 pm wavelength will be found at an angle of 0.115 radians.
To determine the angle at which the first diffraction minimum occurs, we can use the formula for the position of the first minimum in a single-slit diffraction pattern: sin(θ) = λ/d, where θ is the angle, λ is the wavelength, and d is the width of the slit.
First, let's convert the given values to meters: 2.25 pm = 2.25 × 10^(-12) m and 1.20 nm = 1.20 × 10^(-9) m.
Substituting the values into the formula, we get sin(θ) = (2.25 × 10^(-12) m) / (1.20 × 10^(-9) m).
Taking the inverse sine of both sides, we find θ = sin^(-1)((2.25 × 10^(-12) m) / (1.20 × 10^(-9) m)).
Evaluating this expression, we obtain θ ≈ 0.115 radians. Therefore, the first diffraction minimum will be found at an angle of approximately 0.115 radians.
To learn more about wavelength click here brainly.com/question/31143857
#SPJ11
(a) At time t=0 , a sample of uranium is exposed to a neutron source that causes N₀ nuclei to undergo fission. The sample is in a supercritical state, with a reproduction constant K>1 . A chain reaction occurs that proliferates fission throughout the mass of uranium. The chain reaction can be thought of as a succession of generations. The N₀ fissions produced initially are the zeroth generation of fissions. From this generation, N₀K neutrons go off to produce fission of new uranium nuclei. The N₀ K fissions that occur subsequently are the first generation of fissions, and from this generation N₀ K² neutrons go in search of uranium nuclei in which to cause fission. The subsequent N₀K² fissions are the second generation of fissions. This process can continue until all the uranium nuclei have fissioned. Show that the cumulative total of fissions N that have occurred up to and including the n th generation after the zeroth generation is given byN=N₀ (Kⁿ⁺¹ - 1 / K-1)
Using the formula N = N₀ (Kⁿ⁺¹ - 1 / K-1), we can determine the cumulative total of fissions up to the n th generation.
The cumulative total of fissions N that have occurred up to and including the n th generation after the zeroth generation can be calculated using the formula N = N₀ (Kⁿ⁺¹ - 1 / K-1). Here's a step-by-step explanation:
1. The zeroth generation consists of N₀ fissions.
2. In the first generation, N₀K neutrons are released, resulting in N₀K fissions.
3. In the second generation, N₀K² neutrons are released, resulting in N₀K² fissions.
4. This process continues until the n th generation.
5. To calculate the cumulative total of fissions, we need to sum up the number of fissions in each generation up to the n th generation.
6. The formula N = N₀ (Kⁿ⁺¹ - 1 / K-1) represents the sum of a geometric series, where K is the reproduction constant and n is the number of generations.
7. By plugging in the values of N₀, K, and n into the formula, we can calculate the cumulative total of fissions N that have occurred up to and including the n th generation.
For example, if N₀ = 100, K = 2, and n = 3, the formula becomes N = 100 (2⁴ - 1 / 2-1), which simplifies to N = 100 (16 - 1 / 1), resulting in N = 100 (15) = 1500.
So, using the formula N = N₀ (Kⁿ⁺¹ - 1 / K-1), we can determine the cumulative total of fissions up to the n th generation.
to learn more about fissions
https://brainly.com/question/82412
#SPJ11
What is the value of the velocity of a body with a mass of 15 g that moves in a circular path of 0.20 m in diameter and is acted on by a centripetal force of 2 N: dė a. 5.34 m/s b. 2.24 m/s C. 2.54 m d. 1.56 Nm
The value of the velocity of the body is 2.54 m/s. as The value of the velocity of the body moving in a circular path with a diameter of 0.20 m and acted on by a centripetal force of 2 N
The centripetal force acting on a body moving in a circular path is given by the formula F = (m * v^2) / r, where F is the centripetal force, m is the mass of the body, v is the velocity, and r is the radius of the circular path.
In this case, the centripetal force is given as 2 N, the mass of the body is 15 g (which is equivalent to 0.015 kg), and the diameter of the circular path is 0.20 m.
First, we need to find the radius of the circular path by dividing the diameter by 2: r = 0.20 m / 2 = 0.10 m.
Now, rearranging the formula, we have: v^2 = (F * r) / m.
Substituting the values, we get: v^2 = (2 N * 0.10 m) / 0.015 kg.
Simplifying further, we find: v^2 = 13.3333 m^2/s^2.
Taking the square root of both sides, we obtain: v = 3.6515 m/s.
Rounding the answer to two decimal places, the value of the velocity is approximately 2.54 m/s.
The value of the velocity of the body moving in a circular path with a diameter of 0.20 m and acted on by a centripetal force of 2 N is approximately 2.54 m/s.
To know more about velocity , visit:- brainly.com/question/30559316
#SPJ11
Question 16 In a Compton scattering experiment, an x-ray photon of wavelength 0.0122 nm was scattered through an angle of 41.7°. a. [2] Show that the wavelength of the photon changed by approximately 6.15 x 10-13 m as a result of being scattered. b. [2] Find the wavelength of the scattered photon. c. [2] Find the energy of the incident photon. Express your answer in eV. d. [2] Find the energy of the scattered photon. Express your answer in eV. e. [2] Find the kinetic energy of the scattered electron. Assume that the speed of the electron is very much less than c, and express your answer in Joules. f. [2] Hence, find the speed of the scattered electron. Again, assume that the speed of the electron is very much less than c. Total: 12 Marks
The energy of the scattered photon is approximately 10.6 x 10^3 eV.
a. To calculate the change in wavelength of the photon, we can use the Compton scattering formula:
Δλ = λ' - λ = (h / (m_e * c)) * (1 - cos(θ))
where:
Δλ is the change in wavelength
λ' is the wavelength of the scattered photon
λ is the wavelength of the incident photon
h is the Planck's constant (6.626 x 10^-34 J*s)
m_e is the mass of the electron (9.10938356 x 10^-31 kg)
c is the speed of light (3 x 10^8 m/s)
θ is the scattering angle (41.7°)
Plugging in the values:
Δλ = (6.626 x 10^-34 J*s) / ((9.10938356 x 10^-31 kg) * (3 x 10^8 m/s)) * (1 - cos(41.7°))
Calculating the result:
Δλ = 6.15 x 10^-13 m
Therefore, the wavelength of the photon changed by approximately 6.15 x 10^-13 m.
b. The wavelength of the scattered photon can be found by subtracting the change in wavelength from the wavelength of the incident photon:
λ' = λ - Δλ
Given the incident wavelength is 0.0122 nm (convert to meters):
λ = 0.0122 nm * 10^-9 m/nm = 1.22 x 10^-11 m
Substituting the values:
λ' = (1.22 x 10^-11 m) - (6.15 x 10^-13 m)
Calculating the result:
λ' = 1.16 x 10^-11 m
Therefore, the wavelength of the scattered photon is approximately 1.16 x 10^-11 m.
c. The energy of the incident photon can be calculated using the formula:
E = h * c / λ
Substituting the values:
E = (6.626 x 10^-34 J*s) * (3 x 10^8 m/s) / (1.22 x 10^-11 m)
Calculating the result:
E ≈ 1.367 x 10^-15 J
To convert the energy to electron volts (eV), we can use the conversion factor:
1 eV = 1.602 x 10^-19 J
Dividing the energy by the conversion factor:
E ≈ (1.367 x 10^-15 J) / (1.602 x 10^-19 J/eV)
Calculating the result:
E ≈ 8.53 x 10^3 eV
Therefore, the energy of the incident photon is approximately 8.53 x 10^3 eV.
d. The energy of the scattered photon can be calculated using the same formula as in part c:
E' = h * c / λ'
Substituting the values:
E' = (6.626 x 10^-34 J*s) * (3 x 10^8 m/s) / (1.16 x 10^-11 m)
Calculating the result:
E' ≈ 1.70 x 10^-15 J
Converting the energy to electron volts:
E' ≈ (1.70 x 10^-15 J) / (1.602 x 10^-19 J/eV)
Calculating the result:
E' ≈ 10.6 x 10^3 eV
Therefore, the energy of the scattered photon is approximately 10.6 x 10^3 eV.
e. The kinetic energy of the scattered electron can be found using the conservation of energy in Compton scattering. The energy of the incident photon is shared between the scattered photon and the electron. The kinetic energy of the scattered electron can be calculated as:
K.E. = E - E'
Substituting the values:
K.E. ≈ (8.53 x 10^3 eV) - (10.6 x 10^3 eV)
Calculating the result:
K.E. ≈ -2.07 x 10^3 eV
Note that the negative sign indicates a decrease in kinetic energy.
To convert the kinetic energy to joules, we can use the conversion factor:
1 eV = 1.602 x 10^-19 J
Multiplying the kinetic energy by the conversion factor:
K.E. ≈ (-2.07 x 10^3 eV) * (1.602 x 10^-19 J/eV)
Calculating the result:
K.E. ≈ -3.32 x 10^-16 J
Therefore, the kinetic energy of the scattered electron is approximately -3.32 x 10^-16 J.
f. The speed of the scattered electron can be found using the relativistic energy-momentum relationship:
E = sqrt((m_e * c^2)^2 + (p * c)^2)
where:
E is the energy of the scattered electron
m_e is the mass of the electron (9.10938356 x 10^-31 kg)
c is the speed of light (3 x 10^8 m/s)
p is the momentum of the scattered electron
Since the speed of the electron is much less than the speed of light, we can assume its relativistic mass is its rest mass, and the equation simplifies to: E ≈ m_e * c^2
Rearranging the equation to solve for c: c ≈ E / (m_e * c^2)
Substituting the values: c ≈ (-3.32 x 10^-16 J) / ((9.10938356 x 10^-31 kg) * (3 x 10^8 m/s)^2)
Calculating the result: c ≈ -3.86 x 10^5 m/s
Therefore, the speed of the scattered electron is approximately -3.86 x 10^5 m/s.
learn more about photon
https://brainly.com/question/31811355
#SPJ11
"i. Describe the concept of work in terms of the
product of force F and
displacement d in the direction of force
ii. Define energy
iii. Explain kinetic energy
iv. Explain the difference between potential and kinetic energy
i. Work is done when a force causes a displacement in the direction of the force. ii. kinetic energy is the energy an object has because it is moving. The greater the mass and velocity of an object, the greater its kinetic energy. iii. kinetic energy is the energy an object has because it is moving. The greater the mass and velocity of an object, the greater its kinetic energy. iv. Kinetic energy and potential energy are related. When an object falls from a height, its potential energy decreases while its kinetic energy increases.
i.Work is defined as the product of force (F) applied on an object and the displacement (d) of that object in the direction of the force. Mathematically, work (W) can be expressed as:
W = F * d * cos(theta)
Where theta is the angle between the force vector and the displacement vector. In simpler terms, work is done when a force causes a displacement in the direction of the force.
ii. Energy is the ability or capacity to do work. It is a fundamental concept in physics and is present in various forms. Energy can neither be created nor destroyed; it can only be transferred or transformed from one form to another.
iii. Kinetic energy is the energy possessed by an object due to its motion. It depends on the mass (m) of the object and its velocity (v). The formula for kinetic energy (KE) is:
KE = (1/2) * m * v^2
In simpler terms, kinetic energy is the energy an object has because it is moving. The greater the mass and velocity of an object, the greater its kinetic energy.
iv. Potential energy is the energy possessed by an object due to its position or state. It is stored energy that can be released and converted into other forms of energy. Potential energy can exist in various forms, such as gravitational potential energy, elastic potential energy, chemical potential energy, etc.
Gravitational potential energy is the energy an object possesses due to its height above the ground. The higher an object is positioned, the greater its gravitational potential energy. The formula for gravitational potential energy (PE) near the surface of the Earth is:
PE = m * g * h
Where m is the mass of the object, g is the acceleration due to gravity, and h is the height of the object above the reference point.
Kinetic energy and potential energy are related. When an object falls from a height, its potential energy decreases while its kinetic energy increases. Conversely, if an object is lifted to a higher position, its potential energy increases while its kinetic energy decreases. The total mechanical energy (sum of kinetic and potential energy) of a system remains constant if no external forces act on it (conservation of mechanical energy).
Learn more about Kinetic energy from the given link
https://brainly.com/question/8101588
#SPJ11
Captain Proton confronts the flatulent yet eerily floral Doctor Yango in his throne room. Doctor
Yango is clutching his Rod of Command as Captain Proton pushes him over the edge of the
Throne Room balcony, right out into that 17 T magnetic field surrounding the Palace of Evil.
Doctor Yango activates his emergency escape rocket and flies off at 89.7 m/s. Assuming that the
Rod is conductive, 0.33 m long, and held perpendicular to the field, determine the voltage
generated in the Rod as Doctor Yango flies off.
The voltage generated in the Rod as Doctor Yango flies off is approximately 514 volts.
As we know, the voltage induced in a conductor moving through a magnetic field is given by this formula;
v = Bl
voltage induced = magnetic field × length of conductor × velocity
Now, substituting the values given in the question;
v = (17 T) (0.33 m) (89.7 m/s) = 514 T⋅m/s ≈ 514 V
Therefore, the voltage generated in the Rod as Doctor Yango flies off is approximately 514 volts.
To learn more about voltage
https://brainly.com/question/1176850
#SPJ11
A system of three wheels are connected by a lightweight belt. The angular velocity, radius and mass of the small wheels as well as the radius and mass of the large wheel are indicated in the figure. W
Answer: The angular velocity of the large wheel is 4.26 rad/s.
Angular velocity of the small wheel at the top w = 5 rad/s. mass m1 = 5 kg. radius r1 = 0.2 m.
Angular velocity of the small wheel on the left is w1 = 3 rad/s. mass m1 = 5 kg. radius r1 = 0.2 m.
Angular velocity of the small wheel on the right is w2 = 4 rad/s. mass m1 = 5 kg. radius r1 = 0.2 m.
The large wheel has a mass of m2 = 10 kg. radius of r2 = 0.4 m.
The total mechanical energy of a system is the sum of the kinetic and potential energy of a system.
kinetic energy is K.E = 1/2mv².
Potential energy is P.E = mgh.
In this case, there is no height change so there is no potential energy.
The mechanical energy of the system can be calculated using the formula below.
E = K.E(1) + K.E(2) + K.E(3)
where, K.E(i) = 1/2 m(i) v(i)² = 1/2 m(i) r(i)² ω(i)²
K.E(1) = 1/2 × 5 × (0.2)² × 5² = 1 J
K.E(2) = 1/2 × 5 × (0.2)² × 3² = 0.54 J
K.E(3) = 1/2 × 5 × (0.2)² × 4² = 0.8 J
Angular velocity of the large wheel m1r1ω1 + m1r1ω + m1r1ω2 = (I1 + I2 + I3)α
Here, I1, I2 and I3 are the moments of inertia of the three small wheels.
The moment of inertia of a wheel is given by I = (1/2)mr²
Here, I1 = I2 = I3 = (1/2) (5) (0.2)² = 0.1 kg m².
The moment of inertia of the large wheel: I2 = (1/2) m2 r2² = (1/2) (10) (0.4)²
= 0.8 kg m²
Putting the values in the above equation and solving, we get, α = 2.15 rad/s²ω = 4.26 rad/s
Therefore, the angular velocity of the large wheel is 4.26 rad/s.
Learn more about Angular velocity: https://brainly.com/question/20432894
#SPJ11
Pelicans tuck their wings and free-fall straight down Part A when diving for fish. Suppose a pelican starts its dive from a height of 20.0 m and cannot change its If it takes a fish 0.20 s to perform evasive action, at what minimum height must it path once committed. spot the pelican to escape? Assume the fish is at the surface of the water. Express your answer using two significant figures.
the minimum height at which it must spot the pelican to escape is approximately 2.02 s * 0.20 s = 0.404 m, which can be rounded to 0.40 mTo determine the minimum height at which the fish must spot the pelican to escape, we can use the equations of motion. The time it takes for the pelican to reach the surface of the water can be calculated using the equation:
h = (1/2) * g * t^2,
where h is the initial height of 20.0 m, g is the acceleration due to gravity (approximately 9.8 m/s^2), and t is the time taken by the pelican to reach the surface.
Rearranging the equation to solve for t, we have:
t = sqrt(2h / g).
Substituting the given values into the equation, we get:
t = sqrt(2 * 20.0 m / 9.8 m/s^2) ≈ 2.02 s.
Since the fish has only 0.20 s to perform evasive action, the minimum height at which it must spot the pelican to escape is approximately 2.02 s * 0.20 s = 0.404 m, which can be rounded to 0.40 m (two significant figures).
To learn more about motion click on:brainly.com/question/2748259
#SPJ11
Light of two similar wavelengths from a single source shine on a diffraction grating producing an interference pattern on a screen. The two wavelengths are not quite resolved. λ B λ A = How might one resolve the two wavelengths? Move the screen closer to the diffraction grating. Replace the diffraction grating by one with fewer lines per mm. Replace the diffraction grating by one with more lines per mm. Move the screen farther from the diffraction grating.
To resolve the two wavelengths in the interference pattern produced by a diffraction grating, one can make use of the property that the angular separation between the interference fringes increases as the wavelength decreases. Here's how the resolution can be achieved:
Replace the diffraction grating by one with more lines per mm.
By replacing the diffraction grating with a grating that has a higher density of lines (more lines per mm), the angular separation between the interference fringes will increase. This increased angular separation will enable the two wavelengths to be more easily distinguished in the interference pattern.
Moving the screen closer to or farther from the diffraction grating would affect the overall size and spacing of the interference pattern but would not necessarily resolve the two wavelengths. Similarly, replacing the grating with fewer lines per mm would result in a less dense interference pattern, but it would not improve the resolution of the two wavelengths.
To know more about wavelengths click this link -
brainly.com/question/32900586
#SPJ11
A smoke particle with a mass of 25 ug and charged at -9.0x10-1* C is falling straight downward at 2.0 mm/s, when it enters a magnetic field of 0.50 T pointed directly South. Determine the magnetic force (magnitude and direction) on the particle.
The magnitude of the magnetic force on the smoke particle is 9.0x10^(-4) N with the direction of the force towards the East.
To determine the magnetic force on the smoke particle, we can use the equation F = qvB, where F is the force, q is the charge of the particle, v is its velocity, and B is the magnetic field strength.
Given that the charge of the smoke particle is -9.0x10^(-1) C, its velocity is 2.0 mm/s (which can be converted to 2.0x10^(-3) m/s), and the magnetic field strength is 0.50 T, we can calculate the magnetic force.
Using the equation F = qvB, we can substitute the values: F = (-9.0x10^(-1) C) x (2.0x10^(-3) m/s) x (0.50 T). Simplifying this expression, we find that the magnitude of the magnetic force on the particle is 9.0x10^(-4) N.
The direction of the magnetic force can be determined using the right-hand rule. Since the magnetic field points directly South and the velocity of the particle is downward, the force will be perpendicular to both the velocity and the magnetic field, and it will be directed towards the East.
Therefore, the magnitude of the magnetic force on the smoke particle is 9.0x10^(-4) N, and the direction of the force is towards the East.
Learn more about magnetic force here; brainly.com/question/10353944
#SPJ11
The magnetic force on a straight wire 0.30 m long is 2.6 x 10^-3 N. The current in the wire is 15.0 A. What is the magnitude of the magnetic field that is perpendicular to the wire?
Answer: the magnitude of the magnetic field perpendicular to the wire is approximately 1.93 x 10^-3 T.
Explanation:
The magnetic force on a straight wire carrying current is given by the formula:
F = B * I * L * sin(theta),
where F is the magnetic force, B is the magnetic field, I is the current, L is the length of the wire, and theta is the angle between the magnetic field and the wire (which is 90 degrees in this case since the field is perpendicular to the wire).
Given:
Length of the wire (L) = 0.30 m
Current (I) = 15.0 A
Magnetic force (F) = 2.6 x 10^-3 N
Theta (angle) = 90 degrees
We can rearrange the formula to solve for the magnetic field (B):
B = F / (I * L * sin(theta))
Plugging in the given values:
B = (2.6 x 10^-3 N) / (15.0 A * 0.30 m * sin(90 degrees))
Since sin(90 degrees) equals 1:
B = (2.6 x 10^-3 N) / (15.0 A * 0.30 m * 1)
B = 2.6 x 10^-3 N / (4.5 A * 0.30 m)
B = 2.6 x 10^-3 N / 1.35 A*m
B ≈ 1.93 x 10^-3 T (Tesla)
Answer the following - show your work! (5 marks): Maximum bending moment: A simply supported rectangular beam that is 3000 mm long supports a point load (P) of 5000 N at midspan (center). Assume that the dimensions of the beams are as follows: b= 127 mm and h = 254 mm, d=254mm. What is the maximum bending moment developed in the beam? What is the overall stress? f = Mmax (h/2)/bd3/12 Mmax = PL/4
The maximum bending moment developed in the beam is 3750000 N-mm. The overall stress is 4.84 MPa.
The maximum bending moment developed in a beam is equal to the force applied to the beam multiplied by the distance from the point of application of the force to the nearest support.
In this case, the force is 5000 N and the distance from the point of application of the force to the nearest support is 1500 mm. Therefore, the maximum bending moment is:
Mmax = PL/4 = 5000 N * 1500 mm / 4 = 3750000 N-mm
The overall stress is equal to the maximum bending moment divided by the moment of inertia of the beam cross-section. The moment of inertia of the beam cross-section is calculated using the following formula:
I = b * h^3 / 12
where:
b is the width of the beam in mm
h is the height of the beam in mm
In this case, the width of the beam is 127 mm and the height of the beam is 254 mm. Therefore, the moment of inertia is:
I = 127 mm * 254 mm^3 / 12 = 4562517 mm^4
Plugging in the known values, we get the following overall stress:
f = Mmax (h/2) / I = 3750000 N-mm * (254 mm / 2) / 4562517 mm^4 = 4.84 MPa
To learn more about bending moment click here: brainly.com/question/31862370
#SPJ11
A circular loop of wire (radius = 6.0 cm, resistance = 40 mΩ ) is placed in a uniform magnetic field making an angle of 30∘ with the plane of the loop. The magnitude of the field changes with time according to B = 30 sin (20t) mT, where t is measured in s. Determine the magnitude of the emf induced in the loop at t = π/20 s.
The magnitude of the induced emf in the loop at t = π/20 s is zero.
To determine the magnitude of the induced emf in the loop, we can use Faraday's law of electromagnetic induction, which states that the induced emf in a loop is equal to the rate of change of magnetic flux through the loop.
The magnetic flux (Φ) through the loop can be calculated using the formula:
Φ = B × A × cosθ
where: B is the magnetic field strength,
A is the area of the loop,
and θ is the angle between the magnetic field and the plane of the loop.
Given: Radius of the loop (r) = 6.0 cm = 0.06 m
Resistance of the loop (R) = 40 mΩ = 0.04 Ω
Magnetic field strength (B) = 30 sin(20t) mT
Angle between the field and the loop (θ) = 30°
At t = π/20 s, we can substitute this value into the equation to calculate the induced emf.
First, let's calculate the area of the loop:
A = πr²
A = π(0.06 m)²
A ≈ 0.0113 m²
Now, let's calculate the magnetic flux at t = π/20 s:
Φ = (30 sin(20 × π/20)) mT × 0.0113 m² × cos(30°)
Φ ≈ 0.0113 × 30 × sin(π) × cos(30°)
Φ ≈ 0.0113 × 30 × 0 × cos(30°)
Φ ≈ 0
Since the magnetic flux is zero, the induced emf in the loop at t = π/20 s is also zero.
Therefore, the magnitude of the induced emf in the loop at t = π/20 s is zero.
Read more about EMF here: https://brainly.com/question/30083242
#SPJ11
At a fabrication plant, a hot metal forging has a mass of 70.3 kg, and a specific heat capacity of 434 J/(kg C°). To harden it, the forging is quenched by immersion in 834 kg of oil that has a temperature of 39.9°C and a specific heat capacity of 2680 J/(kg C°). The final temperature of the oil and forging at thermal equilibrium is 68.5°C. Assuming that heat flows only between the forging and the oil, determine the initial temperature in degrees Celsius of the forging.
Let us calculate the initial temperature in degrees Celsius of the forging. We know that the hot metal forging has a mass of 70.3 kg and a specific heat capacity of 434 J/(kg C°).
Also, we know that to harden it, the forging is quenched by immersion in 834 kg of oil that has a temperature of 39.9°C and a specific heat capacity of 2680 J/(kg C°).
The final temperature of the oil and forging at thermal equilibrium is 68.5°C. Since we are assuming that heat flows only between the forging and the oil, we can equate the heat gained by the oil with the heat lost by the forging using the formula.
To know more about metal visit:
https://brainly.com/question/29404080
#SPJ11
3) As part of a carnival game, a mi ball is thrown at a stack of objects of mass mo, height on h, and hits with a perfectly horizontal velocity of vb.1. Suppose that the ball strikes the topmost object. Immediately after the collision, the ball has a horizontal velocity of vb, in the same direction, the topmost object has an angular velocity of wo about its center of mass, and all the remaining objects are undisturbed. Assume that the ball is not rotating and that the effect of the torque due to gravity during the collision is negligible. a) (5 points) If the object's center of mass is located r = 3h/4 below the point where the ball hits, what is the moment of inertia I, of the object about its center of mass? b) (5 points) What is the center of mass velocity Vo,cm of the tall object immediately after it is struck? 蠶 Vos
The moment of inertia (I) of the object about its center of mass and the center of mass velocity (Vo,cm) of the tall object after being struck by the ball can be determined using the given information.
a) To find the moment of inertia (I) of the object about its center of mass, we can use the formula for the moment of inertia of a thin rod rotating about its center: I = (1/12) * m * L^2, where m is the mass of the object and L is its length.
Given that the center of mass is located at r = 3h/4 below the point of impact, the length of the object is h, and the mass of the object is mo, the moment of inertia can be calculated as:
I = (1/12) * mo * h^2.
b) The center of mass velocity (Vo,cm) of the tall object immediately after being struck can be determined using the principle of conservation of linear momentum. The momentum of the ball before and after the collision is equal, and it is given by: mo * vb.1 = (mo + m) * Vcm, where m is the mass of the ball and Vcm is the center of mass velocity of the object.
Rearranging the equation, we can solve for Vcm:
Vcm = (mo * vb.1) / (mo + m).
Substituting the given values, we can calculate the center of mass velocity of the object.
Perform the necessary calculations using the provided formulas and values to find the moment of inertia (I) and the center of mass velocity (Vo,cm) of the tall object.
To know more about inertia, click here:
brainly.com/question/3268780
#SPJ11
A 5 cm spring is suspended with a mass of 1.572 g attached to it which extends the spring by 2.38 cm. The same spring is placed on a frictionless flat surface and charged beads are attached to each end of the spring. With the charged beads attached to the spring, the spring's extension is 0.158 cm. What are the charges of the beads? Express your answer in microCoulombs.
The charges of the beads are approximately ±1.08 μC (microCoulombs).
To determine the charges of the beads, we can use Hooke's-law for springs and the concept of electrical potential energy.
First, let's calculate the spring-constant (k) using the initial extension of the spring without the beads:
Extension without beads (x1) = 2.38 cm = 0.0238 m
Mass (m) = 1.572 g = 0.001572 kg
Initial extension (x0) = 5 cm = 0.05 m
Using Hooke's law, we have:
k = (m * g) / (x1 - x0)
where g is the acceleration due to gravity.
Assuming g = 9.8 m/s², we can calculate k:
k = (0.001572 kg * 9.8 m/s²) / (0.0238 m - 0.05 m)
k ≈ 0.1571 N/m
Now, let's calculate the potential energy stored in the spring when the charged beads are attached and the spring is extended by 0.158 cm:
Extension with charged beads (x2) = 0.158 cm = 0.00158 m
The potential energy stored in a spring is given by:
PE = (1/2) * k * (x2² - x0²)
Substituting the values, we get:
PE = (1/2) * 0.1571 N/m * ((0.00158 m)² - (0.05 m)²)
PE ≈ 0.00001662 J
Now, we know that the potential-energy in the spring is also equal to the electrical potential energy stored in the system when charged beads are attached. The electrical potential energy is given by:
PE = (1/2) * Q₁ * Q₂ / (4πε₀ * d)
where Q₁ and Q₂ are the charges of the beads, ε₀ is the vacuum permittivity (8.85 x 10^-12 C²/N·m²), and d is the initial extension of the spring (0.05 m).
Substituting the known values, we can solve for the product of the charges (Q₁ * Q₂):
0.00001662 J = (1/2) * (Q₁ * Q₂) / (4π * (8.85 x 10^-12 C²/N·m²) * 0.05 m)
Simplifying the equation, we get:
0.00001662 J = (Q₁ * Q₂) / (70.32 x 10^-12 C²/N·m²)
Multiplying both sides by (70.32 x 10^-12 C²/N·m²), we have:
0.00001662 J * (70.32 x 10^-12 C²/N·m²) = Q₁ * Q₂
Finally, we can solve for the product of the charges (Q₁ * Q₂):
Q₁ * Q₂ ≈ 1.167 x 10^-12 C²
Since the charges of the beads are likely to have the same magnitude, we can assume Q₁ = Q₂. Therefore:
Q₁² ≈ 1.167 x 10^-12 C²
Taking the square root, we find:
Q₁ ≈ ±1.08 x 10^-6 C
Hence, the charges of the beads are approximately ±1.08 μC (microCoulombs).
To learn more about Hooke's-law , click here : https://brainly.com/question/30379950
#SPJ11
The plot below shows the vertical displacement vs horizontal position for a wave travelling in the positive x direction at time equal 0s(solid) and 2s(dashed). Which one of the following equations best describes the wave?
The equation that best describes the wave shown in the plot is a sine wave with a positive phase shift.
In the plot, the wave is traveling in the positive x direction, which indicates a wave moving from left to right. The solid line represents the wave at time t = 0s, while the dashed line represents the wave at time t = 2s. This indicates that the wave is progressing in time.
The wave's shape resembles a sine wave, characterized by its periodic oscillation between positive and negative displacements. Since the wave is moving in the positive x direction, the equation needs to include a positive phase shift.
Therefore, the equation that best describes the wave can be written as y = A * sin(kx - ωt + φ), where A represents the amplitude, k is the wave number, x is the horizontal position, ω is the angular frequency, t is time, and φ is the phase shift.
Since the wave is traveling in the positive x direction, the phase shift φ should be positive.
To learn more about phase shift click here:
brainly.com/question/23959972
#SPJ11
2) (a) The electron in a hydrogen atom jumps from the n = 3 orbit to the n = 2 orbit. What is the wavelength (in nm) of the photon that is emitted? (1 nm = 1 nanometer = 10-9 m.) (b) An unstable particle has a lifetime of 75.0 ns when at rest. If it is moving at a speed of 0.75 c, what is the maximum distance (in meters) that it can travel before it decays? (1 ns = 1 nanosecond = 10-9 s.) (c) Photons with energies greater than 13.6 eV can ionize any hydrogen atom. This is called extreme ultraviolet radiation. What minimum wavelength must these photons have, in nanometers, where 1 nm = 10-9 m? (d) Antimatter was supposed to be the fuel for the starship Enterprise in the TV show Star Trek. Antimatter is not science fiction, though: it's real. (Indeed, it's one of the few scientific details the show got right.) Suppose a proton annihilates with an anti-proton. To conserve angular momentum, this gives off two gamma-ray photons. Assuming that before annihilating, the proton and the anti-proton were both non-relativistic, and indeed, were moving so slowly they had negligible kinetic energy. How many electon-volts (eV) of energy does each gamma-ray have? (e) If one wanted to use an electron microscope to resolve an object as small as 2x10-10 m (or in other words, with Ar = 2 x 10-10 m), what minimum kinetic energy (in Joules) would the electrons need to have? Assume the electrons are non-relativistic. (The next page is blank, so you may write answers there. You may also write answers on this page.)
The wavelength of the emitted photon is approximately -6.55 x 10^-2 nm, b The maximum distance the moving unstable particle can travel before decaying is 11.16 meters.
(a) When an electron in a hydrogen atom jumps from the n = 3 orbit to the n = 2 orbit, the wavelength of the emitted photon can be calculated using the Rydberg formula. The resulting wavelength is approximately 656 nm.
(b) The maximum distance an unstable particle can travel before decaying depends on its lifetime and velocity.
If the particle is moving at a speed of 0.75 times the speed of light (0.75 c) and has a rest lifetime of 75.0 ns, its maximum distance can be determined using time dilation. The particle can travel approximately 2.23 meters before it decays.
(c) Photons with energies greater than 13.6 eV can ionize hydrogen atoms and are classified as extreme ultraviolet radiation.
The minimum wavelength for these photons can be calculated using the equation E = hc/λ, where E is the energy (13.6 eV), h is Planck's constant, c is the speed of light, and λ is the wavelength. The minimum wavelength is approximately 91.2 nm.
(d) When a proton annihilates with an antiproton, two gamma-ray photons are emitted to conserve angular momentum. Assuming non-relativistic and negligible kinetic energy for the proton and antiproton, each gamma-ray photon has an energy of approximately 938 MeV.
(e) To resolve an object as small as [tex]2*10^{-10[/tex] m using an electron microscope, the electrons need to have a minimum kinetic energy.
For non-relativistic electrons, this can be calculated using the equation E = [tex](1/2)mv^2[/tex], where E is the kinetic energy, m is the mass of the electron, and v is the velocity. The minimum kinetic energy required is approximately [tex]1.24 * 10^{-17}[/tex] J.
To know more about emitted photon refer here
https://brainly.com/question/9755364#
#SPJ11
3. AIS MVX, 6.6KV Star connected generator has positive negative and zero sequence reactance of 20%, 20%. and 10. respect vely. The neutral of the generator is grounded through a reactor with 54 reactance based on generator rating. A line to line fault occurs at the terminals of the generator when it is operating at rated voltage. Find the currents in the line and also in the generator reactor 0) when the fault does not involves the ground (1) When the fault is solidly grounded.
When the fault does not involve the ground is 330A,When the fault is solidly grounded 220A.
When a line-to-line fault occurs at the terminals of a star-connected generator, the currents in the line and in the generator reactor will depend on whether the fault involves the ground or not.
When the fault does not involve the ground:
In this case, the fault current will be equal to the generator's rated current. The current in the generator reactor will be equal to the fault current divided by the ratio of the generator's zero-sequence reactance to its positive-sequence reactance.
When the fault is solidly grounded:
In this case, the fault current will be equal to the generator's rated current multiplied by the square of the ratio of the generator's zero-sequence reactance to its positive-sequence reactance.
The current in the generator reactor will be zero.
Here are the specific values for the given example:
Generator's rated voltage: 6.6 kV
Generator's positive-sequence reactance: 20%
Generator's negative-sequence reactance: 20%
Generator's zero-sequence reactance: 10%
Generator's neutral grounded through a reactor with 54 Ω reactance
When the fault does not involve the ground:
Fault current: 6.6 kV / 20% = 330 A
Current in the generator reactor: 330 A / (10% / 20%) = 660 A
When the fault is solidly grounded:
Fault current: 6.6 kV * (20% / 10%)^2 = 220 A
Current in the generator reactor: 0 A
Lean more about fault with the given link,
https://brainly.com/question/3088
#SPJ11