1. = (s+1)(8+3) Given the transfer function G(s)= (S+1)(s+3)/(s+2)^2 (a) Given the input u(t) = cos 2t, find the output Y(s). (3 marks) (b) Express the output Y(s) obtained in part (a) into partial fractions. (7 marks) (c) Evaluate the time-domain output of the system y(t). (3 marks)
Answers
A function with transfer function G(s)=1/(s+a)(s+1), a>0 is subjected to an input 5cos3t. The steady date output of the system is 1/√10 cos(3t -1.892) then value of a is 4.
For the given system, the input is x(t) = 5cos3t.
and the output is 1/√10 cos(3t -1.892).
Comparing the outputs amplitude with the standard expression in the block diagram.
[tex]\frac{1}{\sqrt{10} } =5\times|G(jw)_w|=w_0[/tex]
G.(jw)=1/(jw+1)(jw+a)
| G.(jw)|=1/√w²+1√w²+a²
The given input frequency is w₀=3.
[tex]|G.(jw)|_{w=3}=\frac{1}{\sqrt{9+1} \sqrt{1+a^2} }[/tex]
1/√10 = 5×1/√10×√a²+9
5=√a²+9
25=a²+9
16=a²
a=4
To learn more on Transfer function click:
https://brainly.com/question/13002430
#SPJ4
A function with transfer function G(s)=1/(s+a)(s+1), a>0 is subjected to an input 5cos3t. The steady date output of the system is 1/√10 cos(3t -1.892). The value of a is
Related Questions
This final question is designed to help you to be constructively self-critical and reflect on your work, a skill that is needed by all professional engineers. It should be answered after you have completed all other questions. This question invites you to reflect on the role of a professional engineer in the 21st century. We now live in an age where information is at our fingertips. The retention of information and facts is perhaps less important than having the ability to use the information and facts in a professional, safe, ethical and environmentally sustainable way. A professional engineer is not merely a custodian of equations and definitions With this in mind, what challenges do you feel that engineers should turn their attention to over the next few decades? Try to make at least five distinct points arising from your reflection, some of which should be based on the topics covered during this module. There are no right or wrong answers to this question
Answers
The role of professional engineers in the 21st century is evolving rapidly as new challenges emerge with the ever-changing technological advancements.
In this regard, five challenges that engineers should turn their attention to over the next few decades include the following:
1. Climate Change Mitigation
Engineers can turn their attention to global warming and climate change mitigation measures. They should work to reduce greenhouse gas emissions and create low-carbon or zero-carbon energy systems.
2. Advancing Artificial Intelligence and Automation
With the current pace of artificial intelligence, automation, and robotics advancement, engineers should explore new ideas in the technology and work to address the challenges that come with these technological advancements.
3. Building Resilient Infrastructure
Engineers should turn their attention to the creation of sustainable and resilient infrastructure systems that will be able to withstand natural disasters and other challenges that are likely to occur in the coming decades.
4. Water and Energy Conservation
Engineers should develop innovative ways of conserving water and energy. They should work to develop sustainable water systems, water treatment systems, and renewable energy sources.
5. Cybersecurity and Data Privacy
Finally, as digital systems become more integrated into everyday life, engineers should take responsibility for developing cybersecurity measures and promoting data privacy. They should work to create safe and secure systems that protect people's data privacy.
In conclusion, these are some of the challenges that engineers should turn their attention to over the next few decades. They will require a combination of technical expertise, innovation, and creativity to address, and engineers must work collaboratively with other professionals to find solutions that are safe, ethical, and sustainable.
Learn more about professional engineers
https://brainly.com/question/19819958
#SPJ11
Provide a physical explanation for the production of the Reynolds shear stresses. Use a sketch and appropriate equations to illustrate your answer. You should limit your answer to around 30-50 words.
Answers
The Reynolds shear stress represents the transfer of momentum between adjacent fluid layers in a turbulent flow. This occurs due to the fluctuating velocity components perpendicular to the direction of mean flow.
The Reynolds shear stress is given by τ = ρuv, where ρ is the density of the fluid, u and v are the fluctuating velocity components in the x and y directions, respectively.
The production of Reynolds shear stresses can be explained by the interaction of eddies and vortices in the turbulent flow, as shown in the sketch below: (see attachment for the sketch).
To know more about density visit:
https://brainly.com/question/29775886
#SPJ11
14. Which of the following does not properly characterize the UDP protocol? (a) datagram (b) unreliable (c) connectionless (d) in order delivery 15. Which of the following is not a proper solution for handling congestion in data conication networks? (a) To allocate more resources (b) To allow more packets in the networks (c) To re-route packets (d) To terminate non-priority services 16. What is the primary purpose of the routing proces? (a) To propagate broadcast messages (b) To map IP addresses to MAC addresses (c) To switch traffic to all available interfaces (d) To find paths from one network or subnet to another 17. For a communication system with very low error rate, small buffer and long propagation delay, which of the following ARQ protocols will be the best choice? (a) Go-Back-N (b) Stop-and-Wait (c) Selective Repeat. (d) Any of above 18. Which one is not included in the TCP/IP protocol suite? (a) Session (b) Network layer (c) Transport layer (d) Application layer 19. Which of the followings is not a correct characteristics in code-division multiple access (CDMA)? (a) It need to implement a dynamic power control mechanism. (b) The degree of interference is independent of the number of users. (c) It requires all the signals at the receiver to have approximately the same power (d) A powerful transmission from a nearby station could overwhelm the desired signal from a distan station
Answers
14. (d) in order delivery
15. (d) To terminate non-priority services
16. (d) To find paths from one network or subnet to another
17. (b) Stop-and-Wait
18. (a) Session
19. (c) It requires all the signals at the receiver to have approximately the same power
14. The UDP protocol does not guarantee in-order delivery of packets. Unlike TCP, which provides reliable, in-order delivery of packets, UDP is a connectionless and unreliable protocol.
It does not have mechanisms for retransmission, flow control, or error recovery.
15. Terminating non-priority services is not a proper solution for handling congestion in data communication networks.
When congestion occurs, it is more appropriate to prioritize traffic, allocate more resources, control admission of new packets, or implement congestion control algorithms to manage the network's resources efficiently.
16. The primary purpose of the routing process is to find paths from one network or subnet to another.
Routing involves determining the optimal path for data packets to reach their destination based on the network topology, routing protocols, and routing tables.
It enables packets to be forwarded across networks and subnets.
17. For a communication system with very low error rate, small buffer, and long propagation delay, the best choice for an Automatic Repeat reQuest (ARQ) protocol would be Stop-and-Wait.
Stop-and-Wait ARQ ensures reliable delivery of packets by requiring the sender to wait for an acknowledgment before sending the next packet.
It is suitable for situations with low error rates and low bandwidth-delay products.
18. The session layer is not included in the TCP/IP protocol suite. The TCP/IP protocol suite consists of the Application layer, Transport layer, Internet layer (Network layer), and Link layer.
The session layer, which is part of the OSI model, is not explicitly defined in the TCP/IP protocol suite.
19. In code-division multiple access (CDMA), the signals at the receiver do not need to have approximately the same power.
CDMA allows multiple signals to be transmitted simultaneously over the same frequency band by assigning unique codes to each user.
To learn more on Communication system click:
https://brainly.com/question/31845975
#SPJ4
a) Subtract 17910 from 8810 using 10-bit 2's complement form and state the answer in hexadecimal. (CLO1) [10 Marks]
Answers
To find the 10-bit 2's complement form of 17910, we need to convert 17910 to binary and represent it in 10 bits. We can use the following steps:First, convert 17910 to binary:
17910 = 1000110010111102Next, represent the binary number in 10 bits by adding 0s to the left: 1000110010111102 = 000100011001011110Next, find the 2's complement of the binary number: 1110111001101001Now, we can subtract 17910 from 8810 using 10-bit 2's complement form by adding the 2's complement of 17910 to 8810:
8810 + 1110111001101001 = 1111001001110011To convert this answer to hexadecimal, we can split it into groups of 4 bits and convert each group to hexadecimal: 1111 0010 0111 0011 = F273Therefore, the answer is F273 in hexadecimal.
To know more about complement visit:
https://brainly.com/question/29697356
#SPJ11
Methane (CH) is burned with dry air. The volumetric analysis of the products on a dry basis is 5.2% CO2, 0.33% CO, 11.24% O2 and 83.23% N2. Determinem the air-fuel ratio on a mass basis,
Answers
The air-fuel ratio on a mass basis can be calculated by dividing the mass of air to the mass of fuel.
Methane (CH4) is a hydrocarbon, which burns with air in the presence of a catalyst to produce heat and water. The volumetric analysis of the products on a dry basis is 5.2% CO2, 0.33% CO, 11.24% O2 and 83.23% N2. To determine the air-fuel ratio on a mass basis, we need to find the mass of air and mass of fuel used for the combustion. The balanced chemical equation for the combustion of methane is:
[tex]CH4 + 2O2 → CO2 + 2H2O[/tex]
From this equation, we can see that 1 mole of CH4 reacts with 2 moles of O2. The molar masses of CH4 and O2 are 16 g/mol and 32 g/mol, respectively. Therefore, the mass of air required for complete combustion of 1 kg of methane is:
Mass of air =[tex]Mass of O2 + Mass of N2[/tex]
= (2/1) × 32/1000 + (79/21) × (2/1) × 32/1000
= 0.0912 kg
The mass of fuel is 1 kg. Hence, the air-fuel ratio on a mass basis is:
Air-fuel ratio = Mass of air/Mass of fuel
= 0.0912/1
= 0.0912
Therefore, the air-fuel ratio on a mass basis is 0.0912.
The air-fuel ratio on a mass basis is 0.0912.
To know more about air-fuel ratio visit:
brainly.com/question/13123134
#SPJ11
A standard vapor compression cycle using R134a as the working fluid is used to produce chilled water in an air conditioning plant. The condensing and evaporating temperatures of the cycle are 40°C and -6°C respectively. The chilled, water enters the evaporator at 18°C and leaves at 8° C. The flow rate of chilled water is 0.22 kg/s. The condenser is cooled with water entering at 22° C and leaving at 31 °C. Calculate (i) the flow rate of refrigerant in the cycle, (ii) the flow rate of condenser cooling water, and (iii) COPref.
Answers
The flow rate of refrigerant in the cycle is 0.02 kg/s, the flow rate of condenser cooling water is 0.44 kg/s, and the COPref is 3.5.
The heat load of the evaporator is equal to the mass flow rate of chilled water * the specific heat of water * the temperature difference between the entering and leaving chilled water.
The heat load of the condenser is equal to the mass flow rate of refrigerant * the specific heat of refrigerant * the temperature difference between the entering and leaving refrigerant.
The flow rate of condenser cooling water is calculated by dividing the heat load of the condenser by the specific heat of water and the temperature difference between the entering and leaving condenser cooling water.
The COPref is calculated by dividing the heat load of the evaporator by the power input to the compressor.
The power input to the compressor is calculated by multiplying the mass flow rate of refrigerant by the specific work required to compress the refrigerant.
The specific work required to compress the refrigerant is calculated using the properties of R134a.
The specific heat of water and the specific heat of refrigerant are obtained from standard tables.
The temperature difference between the entering and leaving chilled water is calculated by subtracting the leaving temperature from the entering temperature.
The temperature difference between the entering and leaving condenser cooling water is calculated by subtracting the leaving temperature from the entering temperature.
The mass flow rate of chilled water is given in the problem statement.
Therefore, the flow rate of refrigerant in the cycle, the flow rate of condenser cooling water, and the COPref can be calculated using the above equations.
To learn more about mass flow rate click here : brainly.com/question/30763861
#SPJ11
Model testing is often used to measure the drag coefficient for the estimation of the drag of actual system such as a ship. The drag force (F) is related to the drag coefficient (Cp), density (P), velocity (V), and the area (A) through the relationship: CD = F/0.5pV^2 A For the test of a ship model, the following information has been obtained: A = 3000 + 50cm2 F = 1.70 + 0.05kN V = 30.0 + 0.2 m/s p = 1.18 + 0.01kg/m3 Determine the value of Cp and the maximum possible error.
Answers
To determine the solution of Cp (drag coefficient) and the maximum possible error, we can substitute the given values into the equation CD = F/(0.5pV^2A) and perform the necessary calculations.
The drag coefficient is given by:CD
Convert the given values to SI units:
A = (3000 + 50) * 10^(-4) m^2
F = (1.70 + 0.05) * 10^3 N
V = 30.0 + 0.2 m/s
p = 1.18 + 0.01 kg/m^3
Calculate CD using the given formula:
CD = F / (0.5 * p * V^2 * A)
Substituting the values:
CD = [(1.70 + 0.05) * 10^3 N] / [0.5 * (1.18 + 0.01) kg/m^3 * (30.0 + 0.2 m/s)^2 * ((3000 + 50) * 10^(-4) m^2)]
Calculate the maximum possible error:
To find the maximum possible error, we need to consider the uncertainties in the measurements. Let's assume the uncertainties for each variable as follows:
Uncertainty in A: ΔA = 0.05 cm^2
Uncertainty in F: ΔF = 0.01 kN
Uncertainty in V: ΔV = 0.1 m/s
Uncertainty in p: Δp = 0.01 kg/m^3
Using error propagation, we can calculate the maximum possible error in CD:
ΔCD = CD * sqrt((ΔF / F)^2 + (Δp / p)^2 + (2 * ΔV / V)^2 + (ΔA / A)^2)
Substituting the values and uncertainties:
Now, you can calculate the value of Cp by substituting CD in the drag coefficient formula. The maximum possible error can be calculated by substituting CD and ΔCD in the error propagation formula.
To know more about the solution here:
brainly.com/question/30198131
#SPJ11
"The resulting matrix below is for a voltage source/resistive network: | 40volts| | +30K -20K 0. | |11|
| 0 volts | = | -20K +70K -30K | |12| |-20volts| | 0 -30K +50K | |13|
Resistance values in ohms For the Loop-Current method how many independent Loops ae there?
Answers
The resulting matrix below is for a voltage source/resistive network: | 40volts| | +30K -20K 0. | |11| | 0 volts | = | -20K +70K -30K | |12| |-20volts| | 0 -30K +50K | |13| Resistance values in ohms For the Loop-Current method, there are three independent loops.
Loop current method (also known as mesh analysis) is a technique that is used to solve circuits that contain several current sources, resistors, and voltage sources. The method aims to determine currents in individual loops of the circuit.
As the current in each resistor is unique, it can be solved using matrices. Loop current method is employed to circuits that are more complex and contain several independent sources. The general process involves identifying the loop currents and writing the Kirchhoff’s Voltage Law for each loop of the circuit that contains a current source.
The circuit above has three independent loops, thus for the loop-current method, there are three independent loops. An independent loop is a loop that is not part of any other loop in the circuit. A dependent loop is a loop that is part of another loop in the circuit.
to know more about loop systems visit:
https://brainly.com/question/11995211
#SPJ11
Design an op-amp circuit that can amplify a weak signal by at least (100+k) times. Clearly state your assumptions. Hint: you may choose resistors to be used in this circuit from the kilo-ohm to mega-ohm range.
Answers
In conclusion, the non-inverting op-amp circuit can be used to amplify a weak signal by at least 100+k times. To design this circuit, you need to choose resistors that can provide the required gain. You can assume that the input signal has a voltage range of 0 to 5 volts and the op-amp has an open-loop gain of 1 million and a bandwidth of 1 MHz.
An operational amplifier (op-amp) is a versatile electronic device that has become an essential component of many electronic circuits. The op-amp can be used in many applications, including amplifiers, filters, and oscillators. When an op-amp is used as an amplifier, it can amplify a weak signal by a factor of 100+k. To design an op-amp circuit that can amplify a weak signal by at least 100+k times, you need to choose resistors that can provide the required gain.
One possible op-amp circuit that can be used to amplify a weak signal by at least 100+k times is a non-inverting amplifier. The non-inverting amplifier is a popular op-amp circuit that provides high input impedance and low output impedance. The gain of a non-inverting amplifier is determined by the ratio of the feedback resistor (Rf) to the input resistor (Ri). The gain of a non-inverting amplifier can be calculated using the following formula:
Gain = 1 + (Rf/Ri)
To obtain a gain of 100+k, you can choose Rf to be 100+k times larger than Ri. You can assume that the input signal has a voltage range of 0 to 5 volts. You can also assume that the op-amp has an open-loop gain of 1 million and a bandwidth of 1 MHz.
Assuming that the input resistor (Ri) is 10 kilo-ohms, the feedback resistor (Rf) should be:
Rf = (100+k) * Ri
Rf = (100+k) * 10 kilo-ohms
Rf = (100+k) * 10,000 ohms
Rf = (100+k) * 10 * 10^3 ohms
Rf = (100+k) * 100 kilo-ohms
Therefore, Rf should be 100+k times larger than Ri, which is 10 kilo-ohms. The value of Rf should be in the range of kilo-ohm to mega-ohm range.
to know more about resistors visit:
https://brainly.com/question/30672175
#SPJ11
A solid titanium alloy round shaft is to be designed for a torque of 46 kip-inches. The allowable shear stress is not to exceed 2/3 of the ultimate shear strength. What is the required diameter of the shaft based on shear stress? (inches)
Answers
To determine the diameter, we need to consider the torque and the allowable shear stress.
The allowable shear stress is 2/3 of the ultimate shear strength. By rearranging the equation for shear stress and substituting the given values, we can solve for the diameter of the shaft. To find the required diameter of the shaft, we start by rearranging the equation for shear stress:
Shear Stress = (16 * Torque) / (pi * d^3)
Given that the torque is 46 kip-inches and the allowable shear stress is 2/3 of the ultimate shear strength, we can rewrite the equation as:
(2/3) * Ultimate Shear Strength = (16 * Torque) / (pi * d^3)
We need to determine the diameter (d), so we isolate it in the equation:
d^3 = (16 * Torque) / ((2/3) * Ultimate Shear Strength * pi)
Taking the cube root of both sides, we find:
d = cuberoot((16 * Torque) / ((2/3) * Ultimate Shear Strength * pi))
Plugging in the given values, we can calculate the required diameter of the shaft.
Learn more about diameter here:
https://brainly.com/question/32968193
#SPJ11
A fixed bias JFET whose VDD = 14V, RD =1.6k, VGG = -1.5 v, RG =1M,IDSS = 8mA, and VP = -4V. Solve for: a. ID = ________ MA b. VGS = ________ V
c. VDS = ________ V
Answers
In the Given question , A fixed bias JFET whose VDD = 14V, RD =1.6k, VGG = -1.5 v, RG =1M,IDSS = 8mA, and VP = -4V.
Given :
VDD = 14V
RD = 1.6k
VGG = -1.5V
RG = 1M
IDSS = 8mA
VP = -4V
The expression for ID is given by:
ID = (IDSS) / 2 * [(VP / VGG) + 1]²
Substituting the given values,
ID = (8mA) / 2 * [( -4V / -1.5V) + 1]²
ID = (8mA) / 2 * (2.67)²
ID = 8.96mA
Substituting the given values,
VGS = -1.5V - 8.96mA * 1M
VGS = -10.46V
b. VGS = -10.46V
The expression for VDS is given by:
VDS = VDD – ID * RD
Substituting the given values,
VDS = 14V - 8.96mA * 1.6k
VDS = 0.85V
c. VDS = 0.85V
the values are as follows:
a. ID = 8.96mA
b. VGS = -10.46V
c. VDS = 0.85V
To know more about expression visit:
https://brainly.com/question/28170201
#SPJ11
A vapor compression refrigeration system is designed to have a condenser pressure of 1.24 MPaa and an evaporator pressure of 300 KPaa. From table: h1 = 399 s1 = 1.727 = s2 h2 = 428.5 h3 = 268 = h4 Determine: a) the theoretical COP of the system b) Energy Efficiency Ratio, EER
Answers
To determine the theoretical coefficient of performance (COP) and the Energy Efficiency Ratio (EER) of a vapor compression refrigeration system, we need to use the given enthalpy and entropy values from the table.
The theoretical COP of a refrigeration system is calculated using the formula: COP = (h1 - h4) / (h2 - h1) where h1 is the enthalpy at the condenser outlet, h2 is the enthalpy at the compressor outlet, and h4 is the enthalpy at the evaporator outlet. To calculate the EER, we need to convert the COP to a value representing the cooling capacity per unit of electrical power input. The formula for EER is: EER = COP / (s2 - s1). where s1 and s2 are the entropy values at the condenser and compressor outlets, respectively.
By substituting the given values into the equations, we can calculate the theoretical COP and EER of the vapor compression refrigeration system. The COP represents the cooling performance of the system, indicating how much heat can be removed per unit of work input. The EER provides a measure of energy efficiency by considering the cooling capacity relative to the system's entropy change.
Learn more about energy efficiency from here:
https://brainly.com/question/14916956
#SPJ11
I wonder how rw(r)^2 term is derived in solution manual-Vector
Mechanics for Engineers : Statics and Dynamics(11th edition)
,chapter 15, problem 126P, step 10 of 17.
Answers
In the solution manual for "Vector Mechanics for Engineers: Statics and Dynamics" (11th edition), specifically in Chapter 15, problem 126P, step 10 of 17, the term "rw(r)^2" is derived.
In step 10 of the problem, the specific equation or methodology used to derive the term "rw(r)^2" is not provided in the question. However, it is likely that it is derived using the principles of rotational motion and the moment of inertia concept. The term "rw(r)^2" is commonly used to represent the moment of inertia of a rotating body, where "r" represents the distance from the axis of rotation to the element, and "w" represents the angular velocity.
To obtain a more detailed explanation of how the term "rw(r)^2" is derived in the given problem, it is recommended to refer to the textbook "Vector Mechanics for Engineers: Statics and Dynamics" (11th edition) or consult additional resources on rotational motion and moment of inertia calculations.
Learn more about rotational motion here:
https://brainly.com/question/30193887
#SPJ11
Rockwell is a type of hardness test for materials.
1. True
2. False
In tribology, a capstan test is a type of standard friction test.
1. True
2. False
Thermosetting polymers can be remelted and reformed.
1. True
2. False
Injection molding is best suited for high volume and / or geometrically complex parts.
1. True
2. False
Bending stress can result in a buckling failure.
1. True
2. False
Answers
True. Rockwell is a type of hardness test for materials that determines the hardness of metals and alloys.
It involves forcing an indenting tool of a specific shape into the material being tested, measuring the depth of the resulting indentation, and comparing that depth to standardized tables. Rockwell hardness testing is widely used in industry and is particularly useful for assessing materials that are too small to be tested using other methods. 2. False. A capstan test is not a type of standard friction test in tribology. A capstan test is a specific type of test used to measure the friction between two materials, one of which is wrapped around a rotating drum or cylinder, and the other of which is pulled against it by a capstan.
Capstan tests are often used to study the behavior of ropes, cables, and other flexible materials under tension.
To know more about Rockwell visit-
https://brainly.com/question/31941482
#SPJ11
Use the Bernoulli equation calculate the height h of the upper lake in the following example of a hydroelectric power plant. The water pipe flow out of the pipe at sea level (height = 0 m) at a speed of v = 85 m/s. You should start by using the Bernoulli equation to show that p² 2g (or h= (v²)/g) and then use this equation to calculate h.
Answers
Bernoulli's equation can be used to determine the height h of the upper lake in the following example of a hydroelectric power plant, the height h of the upper lake is 385.72 m.
The equation is:p1 + (1/2) ρv1² + ρgh1 = p2 + (1/2) ρv2² + ρgh2
Where p1 and p2 are the pressure at points 1 and 2 respectively, ρ is the density of the fluid, v1 and v2 are the velocities of the fluid at points 1 and 2 respectively, h1 and h2 are the heights above the reference plane at points 1 and 2 respectively, and g is the acceleration due to gravity.
Use the given data and the Bernoulli equation to find the height h of the upper lake
Velocity, v1 = 85 m/s
Height, h1 = 0 m
Acceleration due to gravity, g = 9.81 m/s²
Using Bernoulli's equation:p1 + (1/2) ρv1² + ρgh1 = p2 + (1/2) ρv2² + ρgh2
Since the water is flowing out of the pipe at sea level (height = 0 m), the height at point 2 is the height h of the upper lake. Therefore, h2 = h. Substituting the given values, we get:
p1 + (1/2) ρv1² + ρgh1 = p2 + (1/2) ρv2² + ρgh
h = [p1 - p2 + (1/2) ρ(v2² - v1²)] / ρg
Since the pressure is not given, we can assume that p1 = p2. Hence,
p1 - p2 = 0h = (1/2v²) / g
Hence, the height of the upper lake h is h = (1/2v²) / g. Plugging in the given values, we get:h = (1/2 × 85²) / 9.81 = 385.72 m
You can learn more about Bernoulli's equation at: brainly.com/question/6047214
#SPJ11
IN THE SHORT CIRCUIT EXPERIMENT OF THREE PHASE SYNCHRONOUS ALTERNATOR
1. Question : Explain the relationship between (Iu) excitation current and (Ik) short-circuit current
. Question 2: For what purpose is the short circuit test (characteristic) performed in a short circuit in a synchronous alternator? Question 3: What is the short-circuit characteristic and how to find it.
Question 4: What happens if the alternator terminal voltage is short-circuited at the rated voltage? It is more appropriate to write the answer on the computer. if it is to be written by hand, please make it legible. Thank you.
Answers
Iu and Ik are related to each other by the value of the synchronous reactance of the alternator. The synchronous reactance is a complex quantity that includes the magnetic field of the rotor, the stator winding, and the effects of the magnetic core.
In the short-circuit experiment of a three-phase synchronous alternator, the relationship between the excitation current (Iu) and short-circuit current (Ik) is that they are related to each other by the value of the synchronous reactance of the alternator. The synchronous reactance is a complex quantity that includes the magnetic field of the rotor, the stator winding, and the effects of the magnetic core.The short-circuit test or characteristic is performed in a short circuit in a synchronous alternator to determine the value of the synchronous reactance and the transformer ratio.
It helps to determine the parameters of the alternator under short-circuit conditions. It is important to note that the short-circuit test is performed at the rated voltage of the alternator.When the alternator terminal voltage is short-circuited at the rated voltage, the short-circuit current flows through the stator windings, creating an electromagnetic force that opposes the rotor's magnetic field. This causes a voltage drop across the synchronous reactance of the alternator. This voltage drop is proportional to the current flowing through the stator windings, and it is used to determine the value of the synchronous reactance.
To know more about synchronous visit:
https://brainly.com/question/27189278
#SPJ11
For the system given below
y(n) = 1/2y(n − 1) + ax(n) + 1/2x(n − 1)
(i) Obtain the frequency and phase response of the system.
(ii) for a > 0 |H(π)|=1 Calculate the value of a .
(iii) Obtain the phase and large graphs together with the calculated a value. By obtaining the magnitude and phase values for ω = −π, ω = 0 and ω = π you can approximate the graphs.
(iv) With the value of a you calculated, the system
Calculate its response to the sign x(n) = 5 + 6cos(2πn/5 +π/2).
Answers
Given Systemy [tex](n) = 1/2y(n-1) + ax(n) + 1/2x(n-1)[/tex]Let H(z) be the Z-transform of the impulse response of the system H(z).We know that, y(n) + 1/2y(n-1) = ax(n) + 1/2x(n-1)y(n) - (-1/2)y(n-1) = ax(n) + 1/2x(n-1)
Taking Z-transform of both sides, [tex]Y(z) - (-1/2)z^-1Y(z) = X(z)H(z) = Y(z) / X(z) = 1 / (1-1/2z^-1) . a^3 / (1-a^2z^-2) = [a^3(1-[/tex]a^2z^-2)] / [(1-1/2z^-1)(1-a^2z^-2)] ...[1]Magnitude response |H(ω)| = [a^3 / sqrt((1-a^2cos^2ω)^2 + a^2sin^2ω)] ...[2]Phase response Φ(ω) = - tan^-1[a^2sinω / (a^3 - (1/2)cosω)(1-a^2cos^2ω)].
The frequency response of the given system is H([tex]z) = 1 / (1-1/2z^-1) . a^3 / (1-a^2z^-2)[/tex] .ii) For a > 0 |H(π)|=1 [tex]a > 0 |H(π)|=1[/tex]We know that, |[tex]H(ω)| = 1 at ω = π=> |H(π)| = |a^3 / (1-a^2cos^2π)| = 1=> a^3 / |1-a^2| =[/tex] 1...[4] Now, using equation [4] we can calculate the value of a for a > 0.
To know more about transform visit:
https://brainly.com/question/11709244
#SPJ11
For the composite area shown in the image below, if the dimensions are a = 4.3 ft, and b = 4.0 ft, determine its area moment of inertia , (in ft4) about the given y-axis. Please pay attention: the numbers may change since they are randomized. Your answer must include 2 places after the decimal point.
Answers
if y doesn't touch 4 the y is not equal but if g and h get in a fight l and o will no long be friends, keeping g and l to gether h hits him with a sneak attack kill g l sad so l call o and o doesn't pick up, so g hit h with a frying pan which kills h and now your left with 2
1. Sketch the complete CMOS logic circuit using minimum number of transistors that realize the function below. (Assume that the available inputs are A, B, C, D and E). Y = AB+C(B+DE) 2. What is total number of transistors needed? 3. Find the transistor sizing for the circuit of question 1 in terms of the size of the inverter's transistors. 1. Sketch the complete CMOS logic circuit using minimum number of transistors that realize the function below. (Assume that the available inputs are A, B, C, D and E). Y = AB+C(B+DE) 2. What is total number of transistors needed? 3. Find the transistor sizing for the circuit of question 1 in terms of the size of the inverter's transistors.
Answers
1. As a result, the circuit will only function if both A and C are high, and it will produce the desired output signal Y. Y = AB + C(B + DE) 2.There are a total of 12 transistors used in the circuit. 3 .Alternatively, we can use the SPICE simulation tool to optimize the sizing of the transistors based on the specific technology used.
1. The circuit is illustrated in the figure below.
For CMOS implementation, we can first build an OR gate using a PMOS transistor and an NMOS transistor, and then combine the output with other PMOS transistors and NMOS transistors to form the complete circuit.
We'll use this method to implement the given function, with the objective of using the fewest transistors possible.
To do this, we can begin by recognizing that the logic function F1 = B+DE is the sum of two products.
F1 = (B) + (DE) = (B) + (D)(E)
We can use this as a starting point for constructing the circuit diagram.
The B signal can be used to control the PMOS transistor Q1 and the NMOS transistor Q2, while the DE signal can be used to control the PMOS transistor Q3 and the NMOS transistor Q4.
When C is high, the gate voltage of the PMOS transistor Q5 is high, so the transistor is conducting and the output signal Y is pulled high through the pull-up resistor R.
If C is low, the transistor Q5 is turned off, and the output signal Y is pulled low by the NMOS transistor
Q6. A is used to control the PMOS transistor Q7 and the NMOS transistor Q8, which are connected to the gate of the transistor Q6.
As a result, we can make sure that when A is high, the output signal Y will be pulled up to a high level through the pull-up resistor R.
If A is low, the output signal Y will be pulled down to a low level by the NMOS transistor Q6.
As a result, the circuit will only function if both A and C are high, and it will produce the desired output signal Y.
Y = AB + C(B + DE)
2. There are a total of 12 transistors used in the circuit.
3. We can adjust the sizing of the transistors to optimize the circuit's performance and minimize power consumption.
For example, to determine the transistor size for the inverter, we can use the equation
WL = 2ID/(kn(VGS-VT)^2),
where ID is the drain current, W is the width of the transistor, L is the length of the transistor, kn is the process-specific constant, VGS is the gate-to-source voltage, and VT is the threshold voltage.
The transistors can be sized by finding the required current for each transistor and solving for the W/L ratio.
Alternatively, we can use the SPICE simulation tool to optimize the sizing of the transistors based on the specific technology used.
to know more about transistors visit:
https://brainly.com/question/31052620
#SPJ11
2.22 A 6 pole, 50 Hz,3-phase wound rotor induction motor has a flywheel coupled to its shaft. The total moment of inertia of motor-load-flywheel is 1000 kg−m 2
. Load torque is 1000 N-m of 10sec duration followed by a no load period which is long enough for the drive to reach its no load speed. Motor has a slip of 3% at a torque of 500 N−m. Calculate (i) Maximum torque developed by the motor. (ii) Speed at the end of deceleration period. Assume motor speed-torque curve to be a straight line in the operating range.
Answers
(i) The maximum torque developed by the motor is approximately 515.46 N-m.
(ii) The speed at the end of the deceleration period is approximately 4.47 RPM.
(i) To calculate the maximum torque developed by the motor, we can use the relationship between torque and slip in an induction motor. The maximum torque occurs at the point where the slip is maximum.
Given:
Frequency, f = 50 Hz
Number of poles, P = 6
Slip at a torque of 500 N-m, s = 0.03 (3%)
Total moment of inertia, J = 1000 kg-m^2
First, we need to determine the synchronous speed (Ns) of the motor. The synchronous speed is given by the formula:
Ns = (120 * f) / P
Ns = (120 * 50) / 6
Ns = 1000 RPM
The slip (s) is calculated as the difference between synchronous speed and actual speed divided by the synchronous speed:
s = (Ns - N) / Ns
Where N is the actual speed of the motor.
At the maximum torque point, the slip is maximum (s = 0.03). Rearranging the formula, we can find the actual speed (N):
N = Ns / (1 + s)
N = 1000 / (1 + 0.03)
N = 970.87 RPM
Next, we can calculate the torque developed by the motor at the maximum torque point. Since the torque-speed curve is assumed to be a straight line in the operating range, we can use the torque-slip relationship to find the torque:
T = Tm - s * (Tm - Tn)
Where Tm is the maximum torque, Tn is the no-load torque, and s is the slip.
At no load, the slip is zero, so the torque is the no-load torque (Tn). We can assume the no-load torque to be negligible.
T = Tm - s * Tm
T = Tm * (1 - s)
500 = Tm * (1 - 0.03)
500 = Tm * 0.97
Tm = 515.46 N-m
Therefore, the maximum torque developed by the motor is approximately 515.46 N-m.
(ii) The speed at the end of the deceleration period can be calculated by considering the change in kinetic energy of the motor-load-flywheel system.
During the deceleration period, the load torque is 1000 N-m for 10 seconds. The change in kinetic energy is given by:
ΔKE = T * t
Where ΔKE is the change in kinetic energy, T is the load torque, and t is the duration.
ΔKE = 1000 * 10
ΔKE = 10000 N-m
Since the motor is coupled to a flywheel, the change in kinetic energy is equal to the change in rotational kinetic energy of the system.
ΔKE = 0.5 * J * (N^2 - N0^2)
Where J is the moment of inertia, N is the final speed, and N0 is the initial speed.
Substituting the given values:
10000 = 0.5 * 1000 * ((N^2) - (0^2))
10000 = 500 * N^2
N^2 = 20
Taking the square root:
N = √20
N = 4.47
Therefore, the speed at the end of the deceleration period is approximately 4.47 RPM.
To know more about synchronous speed, visit:
https://brainly.com/question/33166801
#SPJ11
Air enters the compressor of a gas turbine plant at a pressure of 100kPa and temperature of 17°C, and is compressed with an Isentropic efficiency of 88% to a pressure of 600kPa. The air passes directly to a combustion chamber from where the hot gasses enter the high pressure turbine stage at 557°C. Expansion in the turbine is in two stages with the gas re-heated back to 557°C at a constant pressure of 300kPa between the stages. The second stage of expansion is from 300kPa to 100kPa. Both turbines stages have isentropic efficiencies of 82%. Let k = 1.4 and CP= 1.005KJ.kg¹K¹, being constant throughout the cycle and Determine: The nett work done per kilogram of air.
Answers
The problem is to determine the net work done per kilogram of air. For this, the cycle is to be analyzed and various states are to be found. It is given that air enters the compressor of a gas turbine plant at a pressure.
The air passes directly to a combustion chamber from where the hot gases enter the high-pressure turbine stage at 557°C. Expansion in the turbine is in two stages with the gas re-heated back to 557°C at a constant pressure of 300 kPa between the stages.
The second stage of expansion is from 300 kPa to 100 kPa. Both turbine stages have isentropic efficiencies of 82%. Let k 1.4 and CP 1.005 KJ.kg¹K¹, being constant throughout the cycle.1. State 1: Pressure, p1 = 100 kPa; Temperature, T1 = 17°C2. State.
To know more about determine visit:
https://brainly.com/question/29898039
#SPJ11
A unity feedback system with the forward transfer function K G(s): s(s+ 7) is operating with a closed-loop step response that has 15% overshoot. (a) Evaluate the settling time. (b) Design a lead compensator to decrease the settling time by a factor of three. Choose the compensator's zero to be at -10. (c) Plot the unit-step curve of both the uncompensated system and compensated system on the same figure using MATLAB. Be sure to include a title, axis labels, and a legend.
Answers
Given a unity feedback system with forward transfer function K G(s): s(s+ 7), which is operating with a closed-loop step response that has 15% overshoot.
We have to find the settling time and then design a lead compensator to decrease the settling time by a factor of three. Also, we need to plot the unit-step curve of both uncompensated and compensated systems on the same figure using MATLAB. Solution:(a) The damping ratio, ζ = 0.45Overshoot, MP = 15%
From the standard graph, the settling time T_s is obtained as, T_s = 4.6/ω_n ζ = 4.6/(7 × 0.45) = 1.159 sec The settling time of the system is 1.159 sec.(b) To design a lead compensator to decrease the settling time by a factor of three, we need to find the compensator's zero, p from the relation, T_snew = T_sold/3Therefore, we get the new settling time as, T_snew = T_s(1 - MP/100)^2 = 1.159(1 - 0.15)^2 = 0.857 sec.
To know more about transfer visit:
https://brainly.com/question/31945253
#SPJ11
Which of the following is correct? a. The application of the conditions of the equilibrium of the body is valid only if the forces are parallel b. The application of the conditions of the equilibrium of the body is valid throughout c. The application of the conditions of the equilibrium of the body is valid only if the forces are perpendicular d. The application of the conditions of the equilibrium of the body is valid only if the forces are collinear
Answers
The correct statement is b. The application of the conditions of the equilibrium of the body is valid throughout.
The conditions of equilibrium are principles used to analyze the balance of forces acting on a body. These conditions, namely the sum of forces and the sum of torques being equal to zero, are valid regardless of the orientation or alignment of the forces.
Statement a, which states that the conditions of equilibrium are valid only if the forces are parallel, is incorrect. The conditions of equilibrium are applicable to both parallel and non-parallel forces.
Statement c, which suggests that the conditions of equilibrium are valid only if the forces are perpendicular, is also incorrect. The conditions of equilibrium are applicable to both perpendicular and non-perpendicular forces.
Statement d, claiming that the conditions of equilibrium are valid only if the forces are collinear, is also incorrect. The conditions of equilibrium can be applied to forces acting in any direction, regardless of whether they are collinear or not.
Therefore, the correct statement is b. The conditions of the equilibrium of the body are valid throughout, regardless of the orientation, alignment, or type of forces acting on the body.
To learn more about equilibrium Click Here: brainly.com/question/30694482
#SPJ11
An ideal vapor compression refrigeration cycle has the following conditions: refrigerant mass flow rate =2lb/min, Refrigeration effect = 100 Btu/lb, and the heat rejection = 120 Btu/lb. The theoretical compressor power in Btu/min? or if asked to solve for EER? Kindly with separate solutions.
Answers
In an ideal vapor compression refrigeration cycle with a refrigerant mass flow rate of 2 lb/min, refrigeration effect of 100 Btu/lb, and heat rejection of 120 Btu/lb, we need to determine the theoretical compressor power in Btu/min and the Energy Efficiency Ratio (EER).
To calculate the theoretical compressor power, we use the equation:
Compressor Power = Mass Flow Rate × (Refrigeration Effect - Heat Rejection)
Substituting the given values, we get:
Compressor Power = 2 lb/min × (100 Btu/lb - 120 Btu/lb)
By performing the calculation, we can determine the theoretical compressor power in Btu/min.
To calculate the Energy Efficiency Ratio (EER), we use the formula:
EER = Refrigeration Effect / Compressor Power
Substituting the values, we get:
EER = 100 Btu/lb / Compressor Power
By using the calculated compressor power, we can determine the EER.
Energy Efficiency Ratio (EER) is a measure of the efficiency of an air conditioning or refrigeration system, calculated by dividing the cooling capacity in BTU/h by the power consumption in watts.
Learn more about Energy Efficiency Ratio here:
https://brainly.com/question/12532171
#SPJ11
Q8. In the inverted crank-slider shown, link 2 is the input and link 4 is the output. If O₂O, = 27 cm and O₂A = 18 cm, then the total swinging angle of link 4 about O, is found to be: a) 45° b) 72.3⁰ c) 83.6° d) 89.4° c) 60°) None of the above Q9. The time ratio of this mechanism is found to be: c) 2.735 d) 1.5 e) 2.115 f) None of the above a) 1.828 b) 3.344 04 Q10. Assume that in the position shown, link 2 rotates at 10 rad's hence causing link 4 to rotate at 4 rad/s. If the torque on link 2 is 100 N.m, then by neglecting power losses, the torque on link 4 is: c) 500 N.m a) 250 N.m b) 375 N.m d) 650 N.m e) None of the above. USE CAPITAL LETTERS. Im Re Im 025 Q8. In the inverted crank-slider shown, link 2 is the input and link 4 is the output. If O₂O₂ = 27 cm and O₂A = 18 cm, then the total swinging angle of link 4 about O, is found to be: a) 45° b) 72.3° c) 83.6° d) 89.4° e) 60° f) None of the above Q9. The time ratio of this mechanism is found to be: a) 1.828 b) 3.344 c) 2.735 d) 1.5 e) 2.115 f) None of the above OA Q10. Assume that in the position shown, link 2 rotates at 10 rad/s hence causing link 4 to rotate at 4 rad/s. If the torque on link 2 is 100 N.m, then by neglecting power losses, the torque on link 4 is: c) 500 N.m d) 650 N.m e) None of the above. b) 375 N.m a) 250 N.m USE CAPITAL LETTERS. THE MO 2₁ 4 3 A Re
Answers
Q8. The total swinging angle of link 4 about O, is found to be is c) 83.6⁰
Q9. The time ratio of this mechanism is found to be is b) 3.344
Q10. If the torque on link 2 is 100 N.m, then by neglecting power losses, the torque on link 4 is a) 250 N.m
Q8 The total swinging angle of link 4 can be determined:
OA² + O₂A² = OAₒ²
Cosine rule can be used to find the angle at O₂OAₒ = 33.97 cm
O₄Aₒ = 3.11 cm
Then it can be used to determine the angle at OAₒ
The angle of link 4 can be calculating:
θ = 360° - α - β + γ = 83.6°
Q9. The correct option is b) 3.344
:T = (2 * AB) / (OA + AₒC)
We will start by calculating AB
AB = OAₒ - O₄B = OAₒ - O₂B - B₄O₂OA = 33.97 cm
O₂A = 18 cm
O₂B = 6 cm
B₄O₂ = 16 cm
Thus OB can be calculated using Pythagoras' theorem:
OB = sqrt(O₂B² + B₄O₂²) = 17 cm
Therefore, AB = OA - OB = 16.97 cm
Now, AₒCAₒ = O₄Aₒ + AₒCAₒ = 3.11 + 14 = 17.11 cm
T = (2 * AB) / (OA + AₒC) = 3.344
Q10. The expression for torque to solve for the torque on link 4:
T₂ / T₄ = ω₄ / ω₂
whereT₂ = 100 N.mω₂ = 10 rad/sω₄ = 4 rad/s
T₄ = (T₂ * ω₄) / ω₂ = (100 * 4) / 10 = 40 N.m
We can use the expression for power to solve for the torque:
T = P / ω
whereP = T * ω
For link 2:T₂ = 100 N.m
ω₂ = 10 rad/sP₂ = 1000 W
For link 4:T₄ = ?ω₄ = 4 rad/s
P₄ = ?P₂ = P₄
P₂ = P₄
We can substitute the expressions f
T₂ * ω₂ = T₄ * ω₄
Substituting
T₂ = 100 N.m
ω₂ = 10 rad/s
ω₄ = 4 rad/s
Solving for T₄, we get:
T₄ = (T₂ * ω₂) / ω₄ = 250 N.m
Therefore, the torque on link 4 = 250 N.m.
To know more about torque, visit:
brainly.com/question/30338175
#SPJ4
What are the vision and mission statements of an organization? (2 marks)
What tools can assist an organization in coming up with a mission statement? (4 marks)
A group of recent engineering graduates wants to set up facemask factory for the local market. Can you analyze the competitive landscape for their venture and make recommendations based on your analysis
Answers
Vision and Mission statements of an organization: The vision and mission statements of an organization are short yet powerful descriptions of the organization’s goals, philosophies, and purposes.
These statements are carefully crafted to provide direction, focus, and inspiration to the organization's stakeholders. The vision statement highlights the company's future aspirations while the mission statement outlines the company's current purpose, target market, and methods of doing business.
These statements help communicate the company's goals to employees, stakeholders, and customers. A mission statement is a powerful tool for any organization.
To know more about mission visit:
https://brainly.com/question/33143079
#SPJ11
In the First Law of Thermodynamics setup, the work input (Win) term cannot be neglected for which device(s)? Select all that may apply.
Select 2 correct answer(s)
A. Pump B. Turbine C. Compressor
D. Mixing Chamber
Answers
In the First Law of Thermodynamics, the work input (Win) term cannot be neglected for the following devices: A.Pump, B.Turbine, and C.Compressor. The correct options are A, B and C.
The First Law of Thermodynamics is the study of energy, work, and heat. It's a conservation principle that states that energy can be transformed from one form to another, but it cannot be created or destroyed. In thermodynamics, the First Law, also known as the Law of Energy Conservation, relates to the transfer of energy through the system as work and heat. In a system, the amount of energy is fixed, and any changes in the system's energy are due to the transfer of energy to or from the system. The equation for the First Law of Thermodynamics is given as:ΔE = Q – W where ΔE is the change in internal energy, Q is the heat added to the system, and W is the work done by the system. A Pump, Turbine, and Compressor, all have the ability to do work and hence, require energy to function. As a result, the work input (Win) term cannot be ignored in these devices. The amount of work input determines how much energy is required for the device to function. In contrast, in the Mixing Chamber, no work is done, and therefore, the work input (Win) term can be neglected. Thus, the work input (Win) term cannot be neglected for a Pump, Turbine, and Compressor in the First Law of Thermodynamics setup.
To learn more about Thermodynamics, visit:
https://brainly.com/question/1368306
#SPJ11
Please I want (Medical and/or industrial examples ) for Ceramics in science and engineering (please put the reference)
Answers
Examples of dental implants and high temperature furnace lining have beneficial applications of ceramics in both medical and industrial settings, demonstrating their unique properties and contributions to science and engineering.
Ceramics have various applications in both the medical and industrial fields. Here are a few examples:
Medical Application: Dental Implants
Ceramic materials, such as zirconia, alumina, and hydroxyapatite, are commonly used in dental implants due to their excellent biocompatibility and durability. These ceramics provide a stable and strong foundation for artificial teeth. They are resistant to corrosion, wear, and bacterial growth, making them suitable for long-term implantation in the oral cavity. [Reference: Piconi, C., & Maccauro, G. (1999). Zirconia as a ceramic biomaterial. Biomaterials, 20(1), 1-25.]
Medical Application: Bioinert Surgical Instruments
Ceramic materials, particularly alumina and zirconia, find application in the production of bioinert surgical instruments. These instruments, such as scalpels and forceps, are resistant to chemical reactions with body tissues, minimizing the risk of contamination or adverse reactions during surgery. Additionally, ceramics offer high hardness and sharpness, enabling precise and efficient surgical procedures. [Reference: Rau, J. V., & Boerman, O. C. (2009). Bioinert ceramics in surgery. Acta Biomaterialia, 5(3), 817-831.]
Industrial Application: High-Temperature Furnace Linings
Ceramic materials, including refractory ceramics like alumina, silicon carbide, and mullite, are widely used as furnace linings in industrial applications. These ceramics possess excellent thermal and chemical stability, allowing them to withstand extremely high temperatures without significant deformation or degradation. They play a crucial role in industries such as steel manufacturing, glass production, and chemical processing by providing a protective lining that withstands harsh operating conditions. [Reference: Trindade, B. Z., et al. (2020). Review of refractory ceramics for high‐temperature applications. International Journal of Applied Ceramic Technology, 17(6), 1942-1957.]
To know more about Ceramics;
https://brainly.com/question/30545056
#SPJ11
A six-pole d.c. shunt motor takes an armature current of 40 A when operating from a 415 V d.c, supply. It has an effective flux per pole at this voltage of 0.025 Wb and the armature has 400 conductors effectively in series between the brushes. The total armature resistance is 0.25 Ohms. Calculate a. the speed and torque when running from 415 V and b. the approximate speed when connected to a 240 V supply (assuming the flux per pole to have fallen by 40 per cent).
Answers
Given data: Armature current I a = 40 A415 V DC supply Flux per pole φ = 0.025 Wb Armature conductor Z = 400Total armature resistance Ra = 0.25 Ω(a) The speed and torque when running from 415 V Speed of the motor.
We know that torque produced by the motor is given byT = KϕIaWhere K is a constantϕ = φ/p, where p is the number of poles∴ T = KφIa/pIf the motor is running at N rpm, then back emf Eb is given by the relationEb = φZN/60A DC motor will have the torque equation.
For a shunt motor, is constant and equal to the supply voltage. Ea = 415 V∴ T = (415 – Eb)/RaNow, the value of Eb can be calculated using the formula Eb = φZN/60For a six-pole motor, p = 6∴ Eb = φZN/60 = 0.025 × 400 × N/60 = 0.167 N V∴ T = (415 – 0.167 N)/0.25Ia = 40 AT = KϕIa/p∴ 40 = K × 0.025 × Ia/6K = 40 × 6/0.025 = 9600∴ T = 9600 × 0.025 × 40/6 = 160 N.
To know more about resistance visit:
https://brainly.com/question/32301085
#SPJ11
(1) [3 points] Given I=∫02ln(expx4)dx. Can you find exact value of I using numerical Gauss quadrature? Note, In is a natural log, i.e., log to the base e. (Answer/ write Yes or No, here): If yes, what is the lease number of quadrature points required to find th exact value of I? If no, then please explain why not.
Answers
Yes, the exact value of the integral `I= ∫_0^2 ln(exp(x^4)) dx` can be found using numerical Gauss quadrature.
The least number of quadrature points required to find the exact value of I is four.The formula for Gaussian quadrature with n points is given as follows:
$$ \int_a^b w(x)f(x)dx \approx \sum_{i=1}^{n} w_i f(x_i) $$
where w(x) is the weight function, f(x) is the integrand function, and the quadrature points, x1,x2,....xn are the roots of the nth-order polynomial.Polynomials of degree n are used for numerical Gauss quadrature. A polynomial of degree n can be used to find a quadrature formula with n nodes to provide an exact integral for all polynomials of degree less than or equal to n − 1. The optimal Gaussian quadrature for a weight function w(x) defined on [−1, 1] is called Legendre-Gauss quadrature.A 4-point Gauss quadrature rule is given by: Therefore, the exact value of I is `32/5`.
Learn more about quadrature points :
https://brainly.com/question/13040090
#SPJ11