Which solution is the least concentrated?
O 2
Revise this statement to make it true:
Running water makes rock edges very sharp and pointy.
NEED HELP NOW PLEASE!! WHOEVER ANSWERS FIRST GETS BRAINIEST!!! No links or I’m reporting your answer.
Answer:
Running water makes rock edges very dull because of erosion.
Explanation:
hope this helps ^_^
Which equation is correctly balanced?
A) CaO + 2H2O + Ca(OH)2
B) NH3 + 202 → HNO3 + H20
C) Ca(OH)2 + 2H3PO4 → Ca3(PO4)2 + 3H2O
D) Cu + H2SO4 → CuSO4 + H2O + SO2
CaO + 2H2O + Ca(OH)2 is a balance chemical equation. Therefore, option A is correct.
What is balance chemical equation ?A balanced chemical equation is one that has the same number of atoms of each type in the reaction on both the reactant and product sides. In a balanced chemical equation, both the mass and the change are equal.
When a chemical reaction occurs, the mass of the products should be equal to the mass of the reactants, according to the law of conservation of mass. As a result, the number of atoms in each element remains constant during the chemical reaction. As a result, the chemical equation must be corrected.
The chemical equation is said to be balanced if there are no inequalities. Every element in this example now has an equal number of atoms on both the reactant and product sides.
Thus, option A is correct.
To learn more about balance chemical equation, follow the link;
https://brainly.com/question/28294176
#SPJ2
Using the diagram , what is the intersection of plan ABCD and GC?
Answer:
C
Explanation:
When a line segment and a plane intersect, they intersect at a point. They both coincide on point C
Write the name of flame used In charcoal cavity test.why?
Answer:
the reducing flame also called the carburizing flame.
Explanation:
because it gets the oxides of the unknown salts
how many moles is 130g of cocl2
Answer:
1.3142 mol CoCl2
Explanation:
Well, to answer this we need to find out how many grams are in a single mole of CoCl2. Two find that we need to get the molar mass of CoCl2
Co = 28.0101 g Co per mole
Cl = 35.453 * g Cl per mole
28.0101 + 2 * 35.453 = 98.9161 g CoCl2 per mole
Now, we divide:
130/98.9161 = 1.3142 mol CoCl2
There are 1.31 moles in 130grams of cobalt chloride (CoCl2). Details about how to convert mass to moles can be found below.
How to calculate number of moles?The number of moles of a substance can be calculated by dividing the mass of the substance by its molar mass.
According to this question, there are 130g of CoCl2.
molar mass of CoCl2 = 28 + 35.5(2) = 99g/mol
moles = 130g ÷ 99g/mol
moles = 1.31 moles
Therefore, there are 1.31 moles in 130grams of cobalt chloride (CoCl2).
Learn more about number of moles at: https://brainly.com/question/14919968
160
140
120
100
Temperature (°C)
80
60
40
20
0
0
2 4 6 8
10 12 14 16 18 20 22 24 26
Time (min)
.
At what temp will this substance freeze? 70 CV
At what temp will this substance condense? 70 C
How long will it take to release the heat of vaporization? 3 min
What is the melting point? 70 C
In what physical state did this substance end? Gas
All cooling processes, including phase changes, are Exothermic
At 90 C, what phase of matter is this substance? Liquid
What is the volume of an object that has a mass of 5.80 g and a density of 6.35 g/mL?
Answer:
1.09 mL
Explanation:
Density is a measure of a substance's mass over its volume.
d = m/v
We can rearrange the equation to solve for volume, using algebra.
v = d/m
Therefore v = 6.35/5.80 = 1.09 mL
Why is there a hole in the ozone layer? What do you think the consequences of that hole are?
Answer:
There is a ozone layer because of the special atomphere and chemical conditions that takes place there. I think the consequences of that home area is the very low winter temperatures.
Answer:
There is a hole in the ozone layer because of the pollution on earth. Because of that the UV rays are easily entering the earth through that portion. The consequences of this can be cancers, global warming and disastrous storms.
plz mark as brainliest
At which type of tectonic plate boundary is a volcano least likely to occur?
Answer: the answer is a
Explanation:
I took the test and got it wrong because someone said the answer was divergent boundary and it’s wrong. I hate them I hate them I hate them. I hate it I hate school
Transform boundary is the type of tectonic plate boundary is a volcano least likely to occur.
What is meant by Transform boundary?A transform fault or transform boundary, sometimes called a strike-slip boundary, is a fault along a plate boundary where the motion is predominantly horizontal. It ends abruptly where it connects to another plate boundary, either another transform, a spreading ridge, or a subduction zone.Transform boundary is the type of tectonic plate boundary is a volcano least likely to occur.
To learn more about Transform boundary refer:https://brainly.com/question/18190655
#SPJ2
I went for a walk the other day. I went four blocks east, then seven blocks south, then one block west and finally
eight blocks north
a.What distance did I travel?
b. What's my displacement?
Answer:
a) distance is 4+7+1+8=20 blocks
b) displacement is 10 blocks
Explanation:
find displacement: x and y
x axis displacement = 4-1 = 3 blocks
y axis displacement = -7+8= 1 block
displacement = the square root of 3^2 + 1^2
= 9+1 = 10 blocks.
You can find the angle of displacement with respect to the initial position using trig identities, if you wish.
Question 3
5 pts
The diagram shows a 21.7kg ball located on a shelf 1.6m above the ground. Which best describes the energy
of the ball?
o C. It has mechanical energy in the form of potential energy
O A. Its energy is lost once it falls off the shelf.
O B. Its energy depends upon the speed the ball will travel.
O D. It has mechanical energy in the form of kinetic energy.
Answer:
c
Explanation:
The ball of 21.7 kg which is located on a shelf 1.6 m above ground is having a mechanical energy in the form of potential energy. Hence, C best describes the energy of the ball.
What is potential energy ?Potential energy is the energy stored on it when the object is at rest. Kinetic energy of an object is generated by virtue of its motion. When a body starts moving its potential energy starts converts to kinetic energy.
The sum of kinetic and potential energy of an object is called its mechanical energy. An object has mechanical energy in the form of kinetic energy when it is at rest. When it starts to move its potential energy converts to kinetic energy.
Therefore, the ball of 21.7 kg placed in the shelf of height 1.6 m has a potential energy as long as it stays there on the shelf. Its potential energy = mgh
p = 21.7 kg × 9.8 m/s² × 1.6 m = 340.25 J
Find more on potential energy:
brainly.com/question/24284560
#SPJ6
Use a scientific calculator to calculate [H+] for the following pH values:
7 (a neutral solution)
5.6 (unpolluted rainwater)
3.7 (first acid rain sample in North America)
How many times higher is the concentration of H+ in the Hubbard Brook sample than in unpolluted rainwater?
Answer:
pH = 7 ⇒ [H⁺] = 1.0x10⁻⁷ M
pH = 5.6 ⇒ [H⁺] = 2.5x10⁻⁶ M
pH = 3.7 ⇒ [H⁺] = 2.0x10⁻⁴ M
H⁺ concentration in the Hubbard Brook sample is 80 times higher than in unpolluted rainwater.
Explanation:
To answer this problem we need to keep in mind the definition of pH:
pH = -log[H⁺]Meaning that after isolating [H⁺] we're left with:
[H⁺] = [tex]10^{-pH}[/tex]Now we proceed to calculate [H⁺] for the given pHs:
pH = 7 ⇒ [H⁺] = [tex]10^{-7}[/tex] = 1.0x10⁻⁷ MpH = 5.6 ⇒ [H⁺] = [tex]10^{-5.6}[/tex] = 2.5x10⁻⁶ MpH = 3.7 ⇒ [H⁺] = [tex]10^{-3.7}[/tex] = 2.0x10⁻⁴ MFinally we calculate how many times higher is [H⁺] when pH = 3.7 than when pH = 5.6.
2.0x10⁻⁴ / 2.5x10⁻⁶ = 80Answer:
1. 7 (a neutral solution)
Answer: 10-7= 0.0000001 moles per liter
2. 5.6 (unpolluted rainwater)
Answer: 10-5.6 = 0.0000025 moles per liter
3. 3.7 (first acid rain sample in North America)
Answer: 10-3.7 = 0.00020 moles per liter
The concentration of H+ in the Hubbard Brook sample is 0.00020/0.0000025, which is 80 times higher than the H+ concentration in unpolluted rainwater.
Explanation: -
A 25.00 mL sample of the ammonia solution
was accurately diluted to 250.0 mL. A 25.00mL
aliquot of the diluted ammonia solution was
placed in a conical flask. Indicator was then added
and the solution was titrated with 0.208 molL-1
hydrochloric acid. The indicator changed colour
permanently when 19.64 mL of the acid had been
added. Calculate the concentration of ammonia in
the original solution.
Answer:
1.634 molL-1
Explanation:
The mol ration between NH3 and HCl is 1 : 1
Using Ca Va / Cb Vb = Na / Nb where a = acid and b = base
Na = 1
Nb = 1
Ca = 0.208 molL-1
Cb = ?
Va = 19.64 mL
Vb = 25.00mL
Solving for Cb
Cb = Ca Va / Vb
Cb = 0.208 * 19.64 / 25.0
Cb = 0.1634 molL-1 (Concentration of diluted ammonia solution)
Using the dilution equation;
C1V1 = C2V2
Initial Concentration, C1 = ?
Initial Volume, V1 = 25.00 mL
Final Volume, V2 = 250 mL
Final Concentration, C2 = 0.1634 molL-1
Solving for C1;
C1 = C2 * V2 / V1
C1 = 0.1634 * 250 / 25.00
C1 = 1.634 molL-1
Which of the nine substances are made of three elements?
Answer: You are made of mostly 6 elements: Oxygen, Carbon, Hydrogen, Nitrogen, Calcium, and Phosphorus. Some of these elements combine to form compounds in your body.
Explanation:
when a rotting log was turned over, pill bugs, termites , ants , fungi , and earthworms were living there. the termites represent ____ in its
a. an environment
b. a population
c. a niche
d. an abiotic factor
What ratio of NaCN to HCN is needed to prepare a pH 9.40 buffer? (Ka of HCN is 4.9 × 10⁻¹⁰)
Answer: The ratio of NaCN to HCN is, 1.26
Did anyone do this worksheet (science)
Which of the following pairs of elements will combine to produce a covalent bond?
1-Hydrogen and chlorine
2-Magnesium and oxygen
3-Lithium and bromine
Answer:
Hydrogen and Chlorine
ie HCL
The pairs of chemical elements that will combine to produce a covalent bond is: 1. Hydrogen and chlorine.
In Chemistry, the three (3) main types of chemical bonds include:
Ionic bonds: Lithium and bromineHydrogen bonds: Hydrogen and oxygen.Covalent bonds: Hydrogen and chlorine.A covalent bond can be defined as a type of bond that typically involves the sharing of electrons between the atoms of a chemical element.
For example, the type of bond that is produced (formed) between hydrogen atoms and a chlorine atom is a covalent bond.
The hydrogen atom shares it single electron with a chlorine atom that is having seven (7) valence electrons to produce an inert gas such as hydrochloric acid (HCL).
In conclusion, the pairs of chemical elements that will combine to produce a covalent bond is hydrogen and chlorine.
Read more: https://brainly.com/question/24212500
A 500-gram block of solid cheese is melted in a pot. Which is most likely be the mass of the cheese after it is melted?
pleaseeeeeeeeee answer
Answer:
due to the law of conservation of mass, the mass would stay the same.
Which of these is a behavioral adaptation?
An anteater has a very long tongue to help it eat catch and eat ants.
An artic fox has white fur which helps it blend into the snow.
A mouse has 3–14 offspring at a time to increase the number that survive.
A brown bear hibernates and becomes inactive during winter.
Answer: Your answer would be D
Explanation: Sorry if i get it wrong ! (but good luck and make sure to rate)
Answer:
D
Explanation:
because when it is winter
a bear hibernates in a cave
and eats lots of food so it
dosent starve after sleeping
for such a while.
Hope this helps
plz mark brainliest
if you would be so kind!
bye!
please everyone do this and send me
Answer: question 2 is (a) (25+273)k=298k(b) (373+273)k=646k
question 5 is 25 degree Celsius
question 1 is
a = (293-273) =20 degree Celsius
b = (470-273)=197 degree Celsius
question 3 is
a = naphthalene ball undergo sublimation due to which it convert directly into vapour and disappear into air without leaving any solid
b = the participle of perfume diffuse rapidly into air and its smell can be felt while sitting serval metre away
question 4 isthe force of allraction between the particles increases as we go from liquid to gas so the required order is : Oxygen< water< sugar
I hope it is helpful to you
If you have 12 atoms of hydrogen before a chemical reaction, how many atoms of hydrogen will be present
Answer:
12 atoms of hydrogen will be present in the product
Explanation:
12 atoms of hydrogen will be present in the product because the law of conservation of mass states that mass is neither created nor destroyed in chemical reactions.
The law of conservation states that the mass of the element remains the same during the course of the reaction.
The law of reaction conformed by the following:-
Mass of reactant Mass of productAccording to the question, the amount of hydrogen is 12 atoms in the reactant and the amount will remain the same at the end of the reaction, which is a product that is 12 atoms
Hence, the amount remains the same in the reaction that is 12 atoms
For more information, refer to the link:-
brainly.com/question/2817451
weeks and how much money, in dollars, Jamal deposits into the savings account.
Week
Deposit (dollars)
0
10
1
15
2
20
3
25
4
30
Let f ()represent the amount of money Jamal deposits into his savings account at the end of 2 weeks. Based on the table,
what is f(10)?
E
A
50
0
С
D
60
B
10
2.
3
4
5
6
7
8
9
10 11
Next
Activat
Go to Setto
1002A
3/19/20
CH
O
BH
Type here to search
An
196 becase we all rice
Explanation:
A student draws the model shown below. Which of these best compares the conditions at Location X and Location Y?
Answer:
Explanation:
You have to use formula b to your answer
Using the rules of electron configurations is this a valid orbital diagram?
explain how rain gauge measures the amount of rainfall
A rain gauge is really just a cylinder that catches rain. If an inch collects in the cylinder, it means an inch of rain has fallen. It's that simple. Most standard rain gauges have a wide funnel leading into the cylinder and are calibrated so that one-tenth of an inch of rain measures one inch when it collects inside.
potassium hydroxide , sodium chloride, sodium hydroxide ,calcium chloride , sodium bicarbonate write molecular formula
✧ [tex] \underline{ \underline{ \large{ \tt{A \: N \:S \: W \: E \: R}}}} : [/tex]
[tex] \underline{ \underline{ \large{ \text{Molecular \: Formulaes}}}} : [/tex]
⇾ [tex] \large{ \text{Potassium \: Hydroxide : K \: OH}}[/tex]
⇾ [tex] \large{ \text{Sodium \: Chloride : NaCl}}[/tex]
⇾ [tex] \large{ \text{Sodium \: Hydroxide : NaOH}}[/tex]
⇾ [tex] \large{ \text{Calcium \: Chloride : CaCl}}[/tex]
⇾ [tex] \large{ \text{Sodium \: Bicarbonate} : \tt{Na ( HCO)_{ 3} }}[/tex]
---------------------------------------------------------
☥ [tex] \underline{ \underline{ \large{ \tt{ \: E \: X\: P \: L\: A\: N \: A \: T \: I \: O \: N}}} }: [/tex]
[tex] \underline{ \underline{ \text{Writing \: a \: molecular \: formula}}} : [/tex]
To write a molecular formula , the following steps are usually adopted only when we know the symbol and valencies of elements and radicals present in a molecule.
Step 1 : First , the name of the compound is written.
Step 2 : The symbols of basic and acidic radicals are written side by side.
Step 3 : The valency of each radical is written at the right upper corner of the symbol. The valency of one radical is transferred to another radical and it is written on the right hand side at the bottom corner. If necessary , L.C.M of the valencies us taken to get a simple whole number.
Step 4 : If a compound radical takes part in the molecular formula , the radical is enclosed in brackets and the valency number is written on the right side of the bracket at the bottom of the formula.
For instance :
[tex] \text{Calcium \: \: \: \: \: \: Sulphate}[/tex] [ compound ]
1. [tex] \sf{Ca \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: SO_{4} }[/tex] [ Symbol of basic and acidic radicals ]
2.We know : Valencies of calcium and sulphate are 2 and 2 respectively
3. [tex] \sf{Ca_{2} \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: \: (SO_{4} )_{2} }[/tex] [ Valencies are exchanged and compound radical is enclosed in bracket ]
4.[tex] \sf{CaSO_{4}}[/tex] [ L.C.M is taken to get molecular formula of calcium sulphate ]
Hope I helped ! ♡
Have a wonderful day / night ! ツ
☄ Let me know if you have any questions regarding my answer !
☥ [tex] \underline{ \underline{ \mathfrak{Carry \: On \: Learning}}}[/tex] !! ✎
▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁▁
When dissolved in water all acids will???
Answer:
When dissolved in water, acids donate hydrogen ions (H+). Hydrogen ions are hydrogen atoms that have lost an electron and now have just a proton, giving them a positive electrical charge. Bases, on the other hand, mixed with water yield hydroxide ions (OH-). If a solution has a high concentration of H+ ions, then it is acidic.
Explanation:
So b
Which element would be the most suitable to make a spoon that will melt in
your hot drinks?
A) aluminium
melting point: 660°C
boiling point: 2470°C
B) argon
melting point: -189°C
boiling point:-186°C
C) bromine
melting point: -7°C
boiling point: 59°C
D) gallium
melting point: 30°C
boiling point: 2400°C
E) lithium
melting point: 180°C
boiling point: 1330°C
F)mercury
melting point: -39°C
boiling point:357°C
Answer:
it's A) or E)
others are not suitable cuz their melting point is weak.
Answer:
Gallium
Explanation:
Because the melting point is low and the drinks are usually around 60-70 degrees Celsius so it wil melt
Which type of solute would have the greatest impact on a colligative property?
A. C6H12O6
B. NaCl