1. Enter global configuration mode:
conf t
2. Enter interface configuration mode:
int fa0/1
3. Set the speed of the interface:
speed auto
4. Set the duplex setting for the interface:
duplex auto
Ethernet is a type of local area network (LAN) technology that is used to connect computers and other devices together. It is a physical and data link layer protocol and uses a bus or star topology. It is one of the most widely used networking technologies in the world. Ethernet generally works by sending data over a shared communications channel using packets. Each packet contains both the source and destination addresses, which are used to route the data to its destination.
For more questions like Ethernet click the link below:
https://brainly.com/question/29676725
#SPJ4
What are the four layers of Geert Hofstede's "cultural onion"?
Answer:
Symbol, hero, ritual, value.
Explanation:
write a program to simulate an experiment of tossing a fair coin 16 times and counting the number of heads
import scipy and import numpy as np. data as data bring up numpy. due to chance, rn m = 10**5
Create a computer software to imitate a coin-tossing experiment?This should only require one to three lines of numpy code. (Generate a 2d array of 10**5 x 16 random numbers between 0 and 1 using np.random.uniform1).Then, transform values less than 0.5 to True, or "head," and count how many heads there are on each simulated coin.This is the code:[tex]import numpy as np\\import scipy.stats as stats\\import numpy.random as rn\\m = 10**5; # number of coins\\N = 16; # number of tosses each coin\\sims = np.empty(N)\\for j in range(N):\\flips = np.random.randint(0, 2, m)\\sims[j] = np.sum(flips)print(sims[:])[/tex]
[tex]starter code:import numpy as npimport matplotlib.pyplot as pltfrom numpy.core.fromnumeric import size#%% Q1 setupimport scipy.stats as statsimport numpy.random as rnrn.seed(0)#%% Q1am = 10**5; # number of coinsN = 16; # number of tosses each coinarr = rn.uniform(0,1,size=(m,N))# find headCount[/tex]
To learn more about computer software to imitate a coin-tossing experiment refer to:
https://brainly.com/question/14751194
#SPJ4
this environment is found near the equator on a pretend world. what combination of temperature, precipitation, and humidity best describe environment e's climate?
The combination of temperature, precipitation, and humidity that best characterizes an environment's climate is referred to as desert.
THE DESERTLarge physical characteristics of a desert include geographic boundaries, internal and invading mountain ranges, dominant soil conditions, major cavern and spring systems, external drainage systems, and outstanding bolsons with their related ephemeral lakes and internal drainage systems.
The desert is difficult to characterize, yet the following qualities can be enumerated:
- Low and irregular precipitation patterns (aridity) frequently cause drought throughout the summer months.
- Both air and soil are subject to sustained high temperatures.
- High rates of evaporation from soil surfaces.
- Severe temperature swings.
There are deserts on every continent, covering more than one-fifth of the Earth's surface area. A desert is a region that receives less than 10 inches (25 cm) of precipitation annually. Deserts are included in the category of regions known as drylands.
Deserts are characterized by low humidity (air moisture), low annual precipitation, and an overall moisture deficit, which indicates that the rate of evaporation exceeds the rate of precipitation on average. Extreme temperatures also characterize deserts.
Learn more about the desert here:
https://brainly.com/question/12556787
#SPJ4
consider the following constructor, which is intended to assign the parameter x to an instance variable also named x. what changes can be made for the code to work as intended?
The instance variable population could be returned instead of p, which is local to the constructor.
What is a constructor?A constructor, in object-oriented programming, is a special method of a class or structure that initializes a newly created object of that type. A constructor call is made automatically each time an object is created.
Similar to an instance method, a constructor can be used to set an object's members to default or user-defined values. It typically has the same name as the class.
Since a constructor lacks a return type, despite looking similar, it is not a valid method. The constructor initializes the object, not running code to perform a task, and it is not allowed to be static, final, abstract, or synchronized.
Learn more about constructor
https://brainly.com/question/29692747
#SPJ1
identify the correct term of the highlighted item in the code below. app.get('/painters/:painter id?', function (req, res) { ... }
The highlighted portion of the code is app.get.
what is code for a program?Computer code, or a set of instructions or a system of rules defined in a specific programming language, is a term used in computer programming (i.e., the source code). It is also the name given to the source code after a compiler has prepared it for computer execution (i.e., the object code).
These include bar codes, ISBNs, ASCII codes, post codes, and bank account numbers; a check digit is a common checking mechanism used in many current codes. An illustration of this is the widespread usage of ISBN numbers on all new books today.
A system of communication signals or symbols. a set of assigned and frequently secret symbols (such as letters or numerals).
To learn more about code for a program refer to:
https://brainly.com/question/26134656
#SPJ4
Julian is working on a form in Access, as shown below.
(i couldnt find the image on this one sorry)
Julian would like to create a subform using "frmOrderDetails.” Which steps should he follow?
a. He should right-click on the form under the Forms list and choose Embed from the drop-down list.
b. He should double-click on the form under the Forms list and save it as “frmRetailers.”
c. He should click on the form under the Forms list and drag and drop it onto the “frmRetailers” forms.
d. He should left-click on the form under the Forms list and save it as “subfrmRetailers.”
Since Julian would like to create a subform using "frmOrderDetails.” The steps that he should follow is c. He should click on the form under the Forms list and drag and drop it onto the “frmRetailers” forms.
What is the foam about?Right-click the form you wish to use as the main form in the Navigation Pane, and then select Layout View. From the Navigation Pane, drag the form you want to use as the subform onto the main form.
Subforms are forms inside other forms. Whenever there is a one-to-many relationship and you wish to display data from numerous tables, you often use it. For instance, if you wanted to display an order along with the order details, you would use a subform.
So, When you wish to display data from tables or queries with a one-to-many relationship, subforms are extremely helpful. For instance, a Customer form might have a subform that shows the Orders for each customer.
Learn more about form from
https://brainly.com/question/3491847
#SPJ1
most websites provide information about what data is being collected, how it will be used, and why it is being collected. websites provide this information in order to satisfy which gapp principle?
Most websites provide information about what data is being collected, how it will be used, and why it is being collected. websites provide this information in order to satisfy the notice gapp principle.
What do you mean by big data?
Big data is defined as data that is so vast, quick, or complex that it is challenging or impossible to process using conventional techniques. For analytics purposes, it has long been practiced to access and store sizable amounts of data.
Unstructured data, such as text, documents, and multimedia files; semi-structured data, like web server logs and streaming data from sensors; and structured data, such as transactions and financial records, are all included in the broad category of big data.
To learn more about big data, use the link given
https://brainly.com/question/28507586
#SPJ4
write the definition of a function power to, which receives two parameters. the first is a double and the second is an int. the function returns a double. if the second parameter is negative, the function returns zero. otherwise it returns the value of the first parameter raised to the power of the second.
The definition of a function power_to, which receives two parameters is:
def power_to(bdouble, bint):
if bint<0:
return 0
else:
return bdouble**bint
What are parameters?
A parameter is a unique type of variable that is used in a function to refer to one of the bits of data given to the function as input. These data points represent the values of the arguments used to call or invoke the function.
A function's definition often includes an ordered list of parameters so that the function's arguments are evaluated each time it is called and the resulting values can be assigned to the associated parameters.
To learn more about parameters, use the link given
https://brainly.com/question/29555936
#SPJ4
Write the special method __str__() for CarRecord.
Sample output with input: 2009 'ABC321'
Year: 2009, VIN: ABC321
The following code is what I have came up with, but I'm receiving an error:
TYPEERROR: __str__ returned non-string
I can't figure out where I went wrong.
Model year and registration number of an automobile are displayed in the program's implementation of the car record class. This is how the Python 3 program works.
Car record class:
initialize the carRecord class.
__init (self) def
#define the class's init method
0 for self.year made
Initialized to 0 is the #year the car was built (integer)
auto.car vin = ""
The string #car registration is empty.
__str (self) def
#define a method for str
bring back "Year: self.year made, VIN: self.car vin"
# yields a formatted year and VIN number display.
carrecord = my car; ()
#creates a carRecord class instance
Year Made = int(input()) for my car
#asks the user for the vehicle's model year
input my car.car vin ()
#asks the user for the model's VIN.
print(my car)
# show the specifics
An example program run is provided.
To know more about Python click here:
https://brainly.com/question/18502436
#SPJ4
what wireless security method allows you to configure access points to only allow connections from specific physical addresses belonging to devices you trust
The wireless security method allows you to configure access points to only allow connections from specific physical addresses belonging to devices you trust is Ad hoc wireless configuration mode
What is the purpose of ad hoc mode?In order to link two or more wireless devices to one another without the need of standard network infrastructure equipment, such as a wireless router or access point, a wireless ad hoc network, or WANET, is a sort of local area network (LAN).
Therefore, in regards to the above, the use of Ad-hoc mode describes a wireless network architecture that enables direct device-to-device communication. An independent basic service set is a feature that is added and is specified in the 802.11 set of specifications (IBSS). Peer-to-peer mode is yet another name for this form of wireless network.
Learn more about wireless configuration from
https://brainly.com/question/9979629
#SPJ1
When logging into a website that uses a directory service, what command authenticates your username and password?.
Answer: Bind If you log into a website that uses a directory service, the website will use LDAP to check that user account is in the user directories and that the password is valid
Explanation:
open the code6-3 columns.css file and create a style rule for the article element to display the contents in a 3 column layout with a minimum column width of 350 pixels,
To open the code 6-3 column.css file and create a style rule following command will be used/* 1(a). style rule for article element*/
article{
/*setting column numbers*/
column-count: 3;
column-width: 350px;
/*setting gap between columns*/
column-gap: 20px;
/*setting rule parameters between columns*/
column-rule: 5px ridge rgb(231, 231, 231);
}
/* 1(b). style rule for h1 element*/
h1{
/*setting span across all columns*/
column-span: all;
/*setting alignment to center*/
text-align: center;
/*setting font size*/
font-size: 3.5em;
/*setting letter spacing*/
letter-spacing: 0.15em;
}
/* 1(c). style rule for paragraph element in article*/
article:: p{
/*setting minimum window size to 4 line*/
widows: 4;
/*setting minimum orphans to 4 line*/
orphans: 4;
}
To learn more about code
https://brainly.com/question/497311
#SPJ4
*Write a program that prompts the user to enter the total number of students first. *Then ask the user to input each student’s grade and use loop statements to read in each grade. Check input grade to make sure 0<=grade<=100, if the user input any other number, print out warning message and ask the user to input a new grade. *Display the highest score, the lowest score, and the average.Here is the sample run:Please input the total number of students: 10Please input the students’ grade: 56 23 89 45 96 -45Grade must between 0 and 100.Please input another score: 45 12 85 74 65The highest grade is: 96The lowest grade is: 12The average grade is: 59Note: You do not need to use array to save each input score for this lab. A Single loop to read in each grade, compare with the current highest grade, lowest grade, and calculate the running sum at the same time.(Java)
Using knowledge in computational language in python it is possible to write a code that prompts the user to enter the total number of students first. *Then ask the user to input each student’s grade and use loop statements.
Writting the code:#calculating Average
def calc_average(scores):
return sum(scores)/len(scores)
grade_dist = {
(90, 101):'A',
(80,90):'B',
(70, 80):'C',
(59, 70):'D',
(0,59):'F'
}
def get_grade_freq(scores):
grades = {'A':0, 'B':0, 'C':0, 'D':0, 'F':0}
for score in scores:
for k, v in grade_dist.items():
if score in range(k[0], k[1]):
grades[v]+=1
print("Grade distributions")
for grade, number in grades.items():
print("Number of {}’s = {}".format(grade, number))
def get_scores(n):
scores = []
cond = True
while cond and n>0:
score = int(input("Enter an exam score between 0 and 100 or -1 to end : "))
if score==-1:
cond=False
return -1
if score not in range(0,101):
print("Sorry, {} is not in the range of 0 and 100 or -1. Try Again!".format(score))
if score in range(0,101):
scores.append(score)
n-=1
return scores
def main():
n = int(input('total number of exams ' ))
scores = get_scores(n)
if scores == -1:
exit(-1)
average = calc_average(scores)
print("You entered {} valid exam scores with an average of {}.".format(n, average))
get_grade_freq(scores)
if __name__=='__main__':
main()
See more about python at brainly.com/question/12975450
#SPJ1
you have installed anti-virus software on the computers on your network. you update the definition and engine files and configure the software to update those files every day. what else should you do to protect your systems from malware? (select two.)
Since you have installed anti-virus software on the computers on your network. The other things that you do to protect your systems from malware are options B and E:
Schedule regular full system scans.Educate users about malware.Why is setting up an antivirus scan important?This is often done so as to guarantee the ongoing health of your system, scheduled scans are essential. They regularly perform a thorough virus and other threat check on your systems. The difficulty with scheduled scans is figuring out when the systems will be accessible.
Therefore, one can say that any software that is seen as a form of malicious is one that has been purposefully created to disrupt a computer, server, client, or computer network, leak sensitive data, as well as been able to gain unauthorized access to data or systems, prevent users from accessing information, or inadvertently compromise a user's computer security and privacy.
Learn more about malware from
https://brainly.com/question/399317
#SPJ1
See full question below
You have installed anti-virus software on the computers on your network. You update the definition and engine files and configure the software to updates those files every day.
What else should you do to protect your systems from malware? (Select two.)
- Disable UAC.
- Educate users about malware.
- Enable chassis intrusion detection.
- Enable account lockout.
- Schedule regular full system scans.
assuming a is the starting vertex for dfs and b is at the top of the stack after the first iteration of the while loop, which vertices are in the stack after the second iteration of the while loop?
The vertices that are in the stack after the second iteration of the while loop are ACD. The correct option is A.
What is a while loop?A “While” Loop is used to iterate over a certain block of code until a condition is met. The while statement, also known as the while loop, executes the sequence of statements between the do and end while keywords for as long as the specified condition holds true.
The condition expression is only tested at the beginning of each loop iteration. Because the number of iterations is unknown to the user ahead of time, this loop is also known as a pre-tested loop.
Therefore, the correct option is A, ACD.
To learn more about the while loop, refer to the link:
https://brainly.com/question/13148070
#SPJ1
The question is incomplete. Your most probably complete question is given below, the image is added below:
[10 pts] how do you have to set up the control signals to transfer a numeric value from the main memory (ram) to the accumulator register on the brainless microprocessor?
STEPS :
To transfer a numeric value from the main memory (RAM) to the accumulator register on the brainless microprocessor, the appropriate control signals must be set up as follows:
1. Set the memory address register to the address of the numeric value in RAM.
2. Set the memory data register to the numeric value.
3. Set the memory read signal high.
4. Set the memory write signal low.
5. Set the accumulator write signal high.
6. Set the accumulator read signal low.
7. Set the accumulator address to the address of the accumulator register.
8. Clock the memory and accumulator control signals.
To know more about RAM
https://brainly.com/question/11411472
#SPJ1
will the 802.11protocol completely break down in this situation? discuss what happens when two stations, each associated with a different isp, attempt to transmit at the same time
The 802.11 protocol is designed to detect and resolve conflicts between stations when two devices attempt to transmit data at the same time. In this situation, when two stations associated with different ISPs attempt to transmit simultaneously, the protocol will detect the collision and initiate a process of collision resolution.
1. Will the 802.11protocol completely break down in this situation? No, the 802.11 protocol will not completely break down in this situation. The protocol is designed to detect and resolve conflicts between stations.When two stations attempt to transmit at the same time, the protocol will detect the collision and each station will wait a random amount of time before attempting to retransmit the data. If a collision occurs again, the protocol will increase the amount of time each station must wait before attempting to retransmit. This process helps to ensure that only one station can transmit at a time.
2. What happens when two stations, each associated with a different ISP, attempt to transmit at the same time?When two stations, each associated with a different ISP, attempt to transmit at the same time, a collision is detected by the 802.11 protocol. The protocol then triggers a process of collision resolution, in which each station waits a random amount of time before attempting to retransmit the data. This process continues until only one station is transmitting, thus avoiding further collisions.
Learn more about the Two stations: https://brainly.com/question/2537310
#SPJ4
2.40 write the decimal equivalents for these ieee floating point numbers. a. 0 10000000 00000000000000000000000 b. 1 10000011 00010000000000000000000 c. 0 11111111 00000000000000000000000 d. 1 10000000 10010000000000000000000
Answer:
A. 2
B. -17
C. Infinity
D. -3.125
Explanation:
The IP address of Computer 1 is 192.168.200.10, and it has a subnet mask of 255.255.240.0. The IP address of Computer 2 is 192.168.195.200, and the IP address of Computer 3 is 192.168.230.40. (5 Points) a. How many bits of the IP address for Computer 1 are used to define its subnet? b. Are Computer 1 and Computer 2 part of the same subnet? Explain your answer. (show your calculation steps) c. Are Computer 1 and Computer 3 part of the same subnet? Explain your answer. (show your calculation steps)
By setting the host bits to all 0s and the network bits to all 1, a 32-bit integer known as a subnet mask is produced.
Every computer, printer, switch, router, and other device that is a part of a TCP/IP-based network is given a unique logical numeric address. A subnet is a distinct and recognizable area of a company's network that is often organized on a single floor, building, or geographic location. By convention, a gateway or router on a certain network is identified by an IP address that ends in ". 1". A broadcast address is one that ends in ". 255"; packets addressed to a broadcast address should be handled by all devices connected to the same network.
Learn more about network here-
https://brainly.com/question/13992507
#SPJ4
how should you format your cover letter when sending it by e-mail? check all that apply. remove your e-mail address and phone number. remove tabs, bullets, and underlining. move your return address from the top of the letter to just below your name. place your return address at the top of the e-mail.
The way a person should format your cover letter when sending it by e-mail is option B and C:
Move your return address from the top of the letter to just below your name.Remove tabs, bullets, and underlining.What is a resume cover letter?This is a one-page business letter known as a cover letter is submitted with your resume when you apply for a job. Your cover letter should serve as a persuasive essay that explains to the employer why you are a strong candidate for the position.
Note therefore, that in Formatting a cover letter, do the below:
Give your contact information.Include today's date and the address of the hiring manager.Greeting should be included.Start with a paragraph of introduction.Your body paragraph(s) should go here.Add a concluding paragraph and a call to action to finish.Your signature should be inputted.Learn more about cover letter from
https://brainly.com/question/12408389
#SPJ1
forthe lac operon, the repressor protein is deactivated when the is present inside the cell increasing the amount of lac operon transcription
When the inducer is inside the cell, lac operon transcription is increased.
Explain about the inducer?Molecular controls of gene expression are known as inducers. The two ways an inducer works are as follows: By neutralising repressors. Due to an inducer's interaction with a repressor, the gene is activated.
Both inactivating repressors and activating activator proteins are methods that inducer molecules use to promote transcription. By attaching to tryptophan in the trp operon, the trp repressor activates itself. So, if tryptophan is not required, the repressor is linked to the operator, and transcription is not turned on. Inducers include things like allolactose. The lac operon in Escherichia coli is controlled in terms of how lactose is expressed.
To learn more about inducer refer to:
https://brainly.com/question/13739807
#SPJ4
you are trying to push a memory module into a memory slot, but it is not seating properly. what is the most likely issue?
Assuming you are trying to push a memory module into a memory slot, but it is not seating properly, the most likely issue would be that: A) you are trying to install the memory module backwards in the memory slot.
What are the types of computer memory?In Computer technology, there are two (2) main types of memory or storage location for software program (application) that are being used on a computer and these include the following;
Read only memory (ROM).Random access memory (RAM).What is RAM?In Computer technology, RAM is an abbreviation for random access memory and it also referred to as a memory module or main memory. RAM can be defined as a volatile and temporary storage (memory) location that is used for currently opened software program (application) and computer data.
What is a memory?A memory simply refers to a terminology that is used to describe the available space on an electronic device that is typically used for the storage of data or any computer related information such as the following:
VideosTextsMusicImagesCodesFoldersIn conclusion, we can reasonably infer that a memory module would seat properly in a memory slot when it is installed in a backward.
Read more on memory here: brainly.com/question/24881756
#SPJ1
Complete Question:
You are trying to push a memory module into a memory slot, but it is not seating properly What is the MOST likely issue?
a)You are trying to install the memory module backwards in the memory slot.
b)You need to clear debris from the memory slot.
c)You need to push down the slot tabs and move them back.
d)You are trying to install a single-sided memory module in a double-sided slot.
at company headquarters, several employees are having issues with their wi-fi access suddenly dropping and then reconnecting to the same wireless network. you decide to investigate and determine that someone has set up a rogue access point near company headquarters and is using it to capture sensitive data from the company network. which type of social engineering attack is being used?
It is to be noted that if at company headquarters, several employees are having issues with their wi-fi access suddenly dropping and then reconnecting to the same wireless network, and you decide to investigate and determine that someone has set up a rogue access point near the company headquarters and is using it to capture sensitive data from the company network. This kind of social engineering is called: "Tailgating and Piggybacking attacks"
What is a social engineering attack?Social engineering is the emotional manipulation of individuals into completing actions or disclosing secret information in the context of information security. This is distinct from social engineering, which does not include the disclosure of sensitive information.
Social engineering is a deception method that takes advantage of the human mistake to get sensitive information, access, or assets. These "human hacking" schemes in cybercrime tend to entice unwary individuals into disclosing data, propagating malware infections, or granting access to restricted systems.
Piggybacking, often known as tailgating, is a sort of social engineering assault that typically targets people in a physical setting.
One example is when an unauthorized individual follows an authorized user into a limited corporate area or system in order to acquire access.
Learn more about social engineering attacks:
https://brainly.com/question/14467106
#SPJ1
You need to configure the FastEthernet 0/1 interface on a switch to automatically detect the appropriate link speed and duplex setting by negotiating with the device connected to the other end of the link.
Drag the command on the left to the approbate configuration step on the right to accomplish this. Not all of the commands may be required
Enter global configuration mode
conf t
Enter interface configuration mode
int fa0/1
Set speed of the interface
speed auto
Set the duplex setting for the interface
duplex auto
To configure the FastEthernet 0/1 interface on a switch to automatically detect the appropriate link speed and duplex setting by negotiating with the device connected to the other end of the link. The commands are as follows:
Enter global configuration modeWhat is an ethernet networking interface?
An Ethernet networking interface, often known as a network client, is a circuit board or card that is installed in a personal computer or workstation. A local area network (LAN) connection can be made by a computer or mobile device utilizing Ethernet as the transmission medium.
An Ethernet networking interface must adhere to a variety of Ethernet standards with various transmission speeds and error correction types/rates. A networking interface for an Ethernet network can use any type of transmission hardware, including fiber optic, coaxial copper, and wireless, depending on the capabilities of the hardware it is sending to or receiving from and the required network transfer rates.
Ethernet is a standard for the transmission of binary data, but even though its hardware characteristics are defined, it is hardware-independent.
To learn more about ethernet networking interface, use the link given
https://brainly.com/question/14775265
#SPJ4
An employee sets up an automation that transfers files in a specific folder on their PC to a remote drive for archiving, provided the files are more than six months old.
Which quality of automation is described in this example?
rule-based
cumulative
intrusive
complex
Automation that transfers files in a specific folder on their PC to a remote drive for archiving is rule-based automation
Rule base automation
The simplest forms of rule-based automation and machine intelligence lead to systems that apply man-made rules to store, sort, and manipulate data, and draw conclusions.
Rule-based decision-making is often referred to as procedure-based decision-making, which can help with many problems. Archive automation like the problem above is one of the problems that can be solved with rule based automation
Learn more about Automation : https://brainly.com/question/14628901
#SPJ4
when using selection sort, how many times longer will sorting a list of 63 elements take compared to sorting a list of 7 elements?
When using selection sort, it will 4 times longer in sorting a list of 63 elements compared to sorting a list of 7 elements.
What is a selection sort?An in-place comparison sorting algorithm in computer science is called selection sort. It performs worse than the equivalent insertion sort in general because it has an O(n2) time complexity, which makes it ineffective on large lists. In some circumstances, especially when auxiliary memory is constrained, selection sort, known for its simplicity, outperforms more complex algorithms in terms of performance.
The algorithm separates the input list into two parts: a sorted sublist of items that is built up from left to right at the front (left) of the list and a sublist of the remaining unsorted items that take up the remainder of the list. The unsorted sublist initially consists of the entire input list, while the sorted sublist is initially empty.
Learn more about selection sort
https://brainly.com/question/14267025
#SPJ4
Systems analysts use a(n) _____ test to verify that all programs in an application work together properly. (525)
a. unit
b. systems
c. integration
d. acceptance
Systems analysts use an unit test to verify that all programs in an application work together properly. So the answer is a. unit
Unit testingUnit testing is a type of software testing that tests individual units or components of the software. Its purpose is to verify that each unit of software code is working as expected.
Unit tests are run by the developer during application development (coding phase). Unit tests isolate sections of code and verify their correctness. Units can be functions, methods, procedures, modules or individual objects.
Learn more about Unit Testing: https://brainly.com/question/22900395
#SPJ4
You have an application that renders videos used in your online business. You want tomake sure that the application continues to receive adequate attention from the systemCPU, even if you open other applications. How can you adjust the amount of attentiongiven to that application?
In the Task Manager, change the application's priority setting. Right-click the application in the "Details" tab and choose "Set Priority." Select "low," "normal," "high," "real time," or "above normal," from the drop-down menu.
How does application work?
An client application, often known as a software application or app for brief, is a computer program that is used by end users and is created to do a specific task that is unconnected to the operation of the computer. Applications include word processing, media players, and accounting systems. All apps are alluded to together by the word "application software." Software system, that is related to how computers work, and utility software are the other two main categories of application ("utilities"). Applications could includes pre just on computer.
To know more about application
https://brainly.com/question/14400492
#SPJ4
a college student logs onto a college computer for the first time. which security policy category should be presented to the student?
Answer:
acceptable use policies
40 points to answer all four questions each in 2- 4 sentances minimum
1. What are some challenges that photographers face when trying to take a great image? What can they do to overcome these challenges?
2. What are some elements that separate good images from great images? How have you used these elements in your photography practice to create great images?
3. What purposes can photographers have for taking photographs? Select one purpose and describe a photograph that MOST LIKELY would be taken to meet that purpose.
4. In photography, what does it mean to capture images with your audience in mind? How have you taken photographs while keeping your audience in mind?
1. Some challenges that photographers face when trying to take a great image include:
Short Windows of Time for the Best Light · Capturing a Scene as it Appears to the Eye2. Some elements that separate good images from great images include:
Light.Subject.Composition3. The purposes that photographers have for taking photographs include:
Memorial.Communicative:Creative4. To capture images with your audience in mind simply means to have the emotions and feelings of the audience in mind.
What is photography about?Photographs are important in everyone's life because they connect us to our past and remind us of people, places, feelings, and stories from our past. They can assist us in determining who we are.
When we talk about capturing the moment in photography, we're really referring to the photo's feeling, emotion, vibe, or atmosphere. That comes from more than just the subjects or the surroundings; it also comes from the photographer.
Learn more about photograph on:
https://brainly.com/question/25821700
#SPJ1