Answer:
The answer is "208 mL".
Explanation:
[tex]C_1 = 25\% \ \frac{m}{v}\\\\C2 = 10\% \ \frac{m}{v}\\ \\V_1= 520\ \ mL\\\\V_2=?[/tex]
In dilutions of different concentration, its initial volume for glucose solution V1 can be obtained by using the following formula, i.e.
[tex]\to C_1V_1 = C_2V_2\\\\\to V_1 = \frac{C_2V_2}{C_1} \\\\= \frac{10 \times 520 }{ 25}\\\\ = 208 \ mL[/tex]
The solution of 520 mL [tex]10\%\ \ (\frac{m}{v})[/tex] final glucose solution thus requires 208 mL of glucose solution of [tex]25\%\ \ (\frac{m}{v})[/tex].
Calculate the molecular mass of sodium trioxocarbonate (iv) decahydrate
Answer:
106.180
Explanation:
maybe this is the correct answer
I SAID MAYBE
A silver nitrate solution is mixed with a potassium bromide solution. The most likely precipitate formed is:
Answer: Silver bromide
Explanation: AgNO3 + KBr — AgBr + KNO3
What happens to the speed of motion of the particles of a gas when a certain volume of the gas is heated at constant pressure? Explain your answer.
Answer:
The particles begin to move faster as the gas is heated. Since the gas remains at a constant pressure and volume, the particles are not able to spread out, so they move around the container even faster.
Explanation:
its just what happens
When a. certain volume of gas is heated at constant pressure, the speed of motion of the gas increases with temperature increase.
Amontons’s law.Anontons law states that If the temperature is increased, the average speed and kinetic energy of the gas molecules increase. If the volume is held constant, the increased speed of the gas molecules results in more frequent and more forceful collisions with the walls of the container, therefore increasing the pressure.
Read more on Kinetic Molecular Theory:
https://brainly.com/question/2901837
#SPJ2
. Suppose an infrared photon with a wavelength of 853 nm were combined with another infrared photon with a wavelength of 865 nm, what would be the wavelength of the new 'combined' photon, in nm
Answer:
Explanation:
Given the data in the question;
wavelength λ₁ = 853 nm = 853 × 10⁻⁹ m
wavelength λ₂ = 865 nm = 865 × 10⁻⁹ m
we determine the energy of each photons using the following expression;
[tex]E_{photon[/tex] = hc / λ
where h is Planck's constant ( 6.626 × 10⁻³⁴ J.s )
c is speed of light ( 3 × 10⁸ m/s )
For Photon with wavelength λ₁ = 853 × 10⁻⁹ m
[tex]E_{photon1[/tex] = hc / λ
we substitute
= ( ( 6.626 × 10⁻³⁴ J.s )( 3 × 10⁸ m/s ) ) / (853 × 10⁻⁹ m)
= 1.9878 × 10⁻²⁵ / 853 × 10⁻⁹
= 2.33 × 10⁻¹⁹ J
For Photon with wavelength λ₂ = 865 × 10⁻⁹ m
[tex]E_{photon2[/tex] = ( ( 6.626 × 10⁻³⁴ J.s )( 3 × 10⁸ m/s ) ) / (865 × 10⁻⁹ m)
= 1.9878 × 10⁻²⁵ / 865 × 10⁻⁹
= 2.298 × 10⁻¹⁹ J
We know that; energy of the combined photon will be equal to the sum of energies of the two photons.
so
Energy of the combined photon = [tex]E_{photon1[/tex] + [tex]E_{photon2[/tex]
[tex]E_{combined[/tex] = 2.33 × 10⁻¹⁹ J + 2.298 × 10⁻¹⁹ J
[tex]E_{combined[/tex] = 4.628 × 10⁻¹⁹ J
so wavelength of the new combined photon will be;
[tex]E_{combined[/tex] = hc / λ[tex]_{combined[/tex]
[tex]E_{combined[/tex]λ[tex]_{combined[/tex] = hc
λ[tex]_{combined[/tex] = hc / [tex]E_{combined[/tex]
we substitute
λ[tex]_{combined[/tex] = ( ( 6.626 × 10⁻³⁴ J.s )( 3 × 10⁸ m/s ) ) / 4.628 × 10⁻¹⁹ J
= 1.9878 × 10⁻²⁵ / 4.628 × 10⁻¹⁹
= 4.2952 × 10⁻⁷ m
= ( 4.2952 × 10⁻⁷ × 10⁹ )nm
= 429.5 nm
Therefore, Wavelength of the new 'combined' photon is 429.5 nm
PLSS HELPP ME i dont knowww
Answer:
non polar. polar ionic substance
Brainiest and 10 points
Which has MORE energy?
A. Radio
B. Infrared
Answer:
B. infrared
hope this helps
have a good day :)
Explanation:
NEED HELP ASAP!!!.....Which is not true about the ionic compound sodium chloride (NaCl)? A.)it was formed when electrons were shared B.)it is electrically neutral C.)it has properties different from the atoms from which it is formed D.)it is a white crystalline solid
Difference between brain and spinal cord
Pls help
How many Grams of NO is produced if 12g of O2 is combined with excess ammonia?
Answer:
9g
Explanation:
moles O2 = mass / Mr = 12 / 2(16.0) = 0.375
ratio O2 : NO = 5:4
moles NO produced = 0.375 * 4/5 = 0.3
mass NO = Mr * mol = (14.0+16.0) * 0.3 = 9g
The Grams of NO is produced if 12g of O2 is combined with excess ammonia is 80 gram.
What is NO?The full form of NO is nitrogen oxide Nitrogen belong to the 15th group of the periodic table with molar mass of 14 and oxygen belong to the 16th group of the periodic table.
In the given their are 4 molecules of each nitrogen and oxygen and mass of O2 is given whereas, mass of nitrogen for 4 molecule will be 56 gram.
Grams of NO = 14 × 4 + 12 × 2
Grams of NO = 80 grams.
Therefore, the mass of NO for the given reaction is combined with excess ammonia is 80 gram.
Learn more about NO, here;
https://brainly.com/question/1178944
#SPJ2
Map
Formulate your hypothesis.
List down the materials.
• Write the methods.
Answer:
How to Formulate an Effective Research Hypothesis
State the problem that you are trying to solve. Make sure that the hypothesis clearly defines the topic and the focus of the experiment.
Try to write the hypothesis as an if-then statement. ...
Define the variables.
Explanation:
Arrange the following ions in order of increasing ionic radius:
potassium ion, chloride ion, phosphide ion, calcium ion
Enter the FORMULA for each ion in the boxes below.
Answer:
just look at what row the element is in. The lower the row, the bigger the radius
Explanation:
I need help with my chemistry but you can only choose one correct answer
Answer:
Explanation:
photosynthesis
the given chemical reaction is photosynthesis.
During photosynthesis carbon dioxide absorbed by plants reacts with water in presence of sunlight to give glucose and oxygen.
g (2pts) A 10x transfer buffer solution is 250mM Tris and 1.92M glycine. Buffers are always used at 1x concentration in the lab (unless specified otherwise in the protocol), so we will have to dilute the 10x buffer to 1x before use. What is the concentration of Tris and glycine in the 1x buffer
Answer:
The explanation according to the given question is summarized below.
Explanation:
Given:
Tris,
= 250 mM
Glycine,
= 1.92 M
According to the solution,
For the dilution pf 10X to 1X buffer, we get
= [tex]1 \ ml \ of \ 10X \ buffer +9 \ ml \ of \ distilled \ water[/tex]
= [tex]10[/tex]
i.e.,
⇒ [tex]10X \ to \ 1X=1:10 \ dilution[/tex]
Now,
⇒ [tex]10X (250 \ mM\ Tris \ HCl, 1.92M\ Glycine, and\ 1 \ percent (\frac{w}{v} ) SDS) ---->1X(25 \ mM \ Tris \ HCl,0.193 M\ Glycine, and \ 0.1 \ percent(\frac{w}{v} )SDS)[/tex]
Which of these is an ion with a charge of 1+?
Which element has the smallest mass on the periodic table? *
O
H
Pb
He
Mg
Answer:
That should be Hydrogen.
So The second option Is legit!
To double-check a chemical in lab before using it, sniff near the opening of the container, true or false?
write 5 acid and 5 akalis
Answer:
5 Acids
Chemical
- Hydrochloric acid in gastric juice
- Sulphuric acid
- Nitric acid
- Uric acid
- Acetic acid
Household
- Vinegar
- Lemon
- Milk
- Batteries
- Soft drinks
5 Alkali
Household
- Dishwashwer soaps
- Detergents
- Toothpaste
- Oven cleaner
- Alkaline batteries
- Sodium bicarbonate
Chemicals
- Sodium hydroxide or lye
- Calcium carbonate (limestone)
- Ammonium hydroxide
- Calcium hydroxide
If an atomic number of an element is 24, the number of protons the Atom has is
A. 24
B. 12
C. 189
D.51.996
Explanation:
i think the answer is A ........ hope this helps
are either positively charged or negatively charged species in which the number of protons and electrons are not equal. ____________ bonds are chemical bonds that results from the sharing of electrons. ____________ are positively charged ions with more ____________ than ____________ . ____________ ion is an example of a polyatomic anion. ____________ is the system of assigning an unambiguous name to a compound.
Answer:
1. Ions are either negatively or positively charged species in which the number of electrons and protons are not equal.
2. The chemical bond that arises due to the sharing of electrons is termed a covalent bond.
3. The positively charged ions are called cations, which comprise more protons than electrons.
4. An example of a polyatomic anion is the hydroxide anion.
5. The system of assigning an unambiguous name to a compound is called nomenclature.
Calculate the volume of an
object with dimensions
measuring:
9.0 mm x 2.0 mm x 2.0 mm
[ ? ] mm3
Answer:
9.0mm x 2.0mm x 2.0mm
= 18mm3
Answer:
36mm^3
Explanation:
This is easy
El butano, C4H10, se quema en presencia de oxígeno gas, O2, y se produce dióxido de carbono, CO2, y agua. ¿Cuántos kg de CO2 se obtendrán al quemarse 12 kg de butano?
Answer:
don't know really and don't know at alll
help please hurry lots of points
ins1502 assignment 03
Answer:
I think you forgot to post the question or picture
Construct a Lewis structure for hydrogen peroxide, H2O2, in which each atom achieves a stable noble-gas electron configuration. Draw the molecule by placing atoms on the grid and connecting them with bonds. Include all lone pairs of electrons.
Answer:
See explanation and image attached
Explanation:
Hydrogen peroxide is made up of two atoms of hydrogen and two atoms of oxygen as shown in the image attached.
The two oxygen atoms are joined together by a single covalent bond and each of the oxygen atoms are bonded to one hydrogen atom each.
There are two lone pairs on each of the oxygen atoms.
The Lewis(dot) structure for hydrogen peroxide is shown in the image attached to this answer.
Explain why the coefficients on the left side of the equation don’t necessarily equal the coefficients on the right side of the equation. Is this possible if mass is being conserved?
Answer:
Explanation:
Short answer: Yes.
The coefficients may not be conserved, but mass always has to be. Take this equation as an example
2 Mg3P2 ===> 6Mg + P4
There is a 2 on the left side and 6 and 1 on the right. I hope you mean that the coefficient 2 is not equal to 7.
But let's look a little closer. You have to look at the molecular structure of the left and right side.
2Mg3P2 has 6 Mgs and 4 Ps on the left side.
6Mg is on the right. They are free standing.
P4 has 1 molecule consisting of 4 Ps.
Everything balances.
This is a terrific question to be asking. You need to understand the internal balance numbers vs the molecular ones on the out side.
That sounds like a bit of gobbledygook and it takes a bit of study.
2 Mg3P2 means that Mg3P2 is written twice.
Mg3P2 ==> "3 Mg2+ + 2P3+ and there is another one written the same way.
Mg3P2 ==> "3 Mg2+ + 2P3+
light energy travels in
Light energy travels in the form of waves.
Question 18 (Multiple Choice Worth 2 points)
(12.02 LC)
What type of adaptation relates to the stages of growth and reproduction of plants?
Inherited trait
O Life cycle difference
O Learned behavior
O Physical characteristic
Answer:
the answer should be Life Cicle Difference.
Answer: Option (D) Is the correct Life cycle difference
Explanation: Hope it helps!
Good luck!!!
How many isomers are there with the following descriptions? Alcohols with the formula Answer Two Bromoalkanes with the formula Answer
Answer:
Three isomers
Isomer I CH3-CHOH - CH3
Isomer 2 CH2OH-CH2-CH3
Isomer 3 CH3-CH2-CH2OH
Explanation:
Complete question
How many isomers are there with the following descriptions?
a) Alcohol with formula C3H8O
Solution
There are total 3 carbon atoms in this alcohol. Hence, there will be three isomers of Alcohol with formula C3H8O .
The three isomers will comprise of alcohol group (OH) attached to the three carbon atoms one by one.
Isomer I CH3-CHOH - CH3
Isomer 2 CH2OH-CH2-CH3
Isomer 3 CH3-CH2-CH2OH
How many moles would be in 85.OmL of 0.750M KOH?
Answer: There are 0.0637 moles present in 85.0 mL of 0.750 M KOH.
Explanation:
Given: Volume = 85.0 mL (1 mL = 0.001 L) = 0.085 L
Molarity = 0.750 M
It is known that molarity is the number of moles of solute present in liter of a solution.
Therefore, moles present in given solution are calculated as follows.
[tex]Molarity = \frac{moles}{Volume (in L)}\\0.750 M = \frac{moles}{0.085 L}\\moles = 0.0637 mol[/tex]
Thus, we can conclude that there are 0.0637 moles present in 85.0 mL of 0.750 M KOH.
Concentrated aqueous perchloric acid is 70.5 wt% HClO4 and has a concentration of 11.7 M. Calculate the volume of concentrated perchloric acid that should be diluted to 1.90 L to form a 5.00 M HClO4 solution.
Answer:
0.812 L
Explanation:
As this is a dilution process problem, we can solve it by using the C₁V₁ = C₂V₂ formula, where in this case:
C₁ = 11.7 MV₁ = ?C₂ = 5.00 MV₂ = 1.90 LWe input the data:
11.7 M * V₁ = 5.00 M * 1.90 LAnd solve for V₁:
V₁ = 0.812 LThis means that 0.812 L of concentrated perchloric acid should be diluted to a final volume of 1.90 L.