Answer:
my first reason is that Mercury is the only one in liquid state at room temperature and thermometers because it has high coefficient of expansion . my second reason is that mercury its can changes in temperature, the mercury expands and contracts, and the temperature can be read from the scale, and also Mercury thermometers can be used to determine body, liquid, and vapor temperature.
A)This part controls the amount of light entering the eyes. A= Iris B= Pupil Give reason for your answer.
Answer:
Iris
Explanation:
Iris can be described as a part of the eyes which regulates the amount of light that enters the eye. The iris is made up of various muscles that control the size of the pupil
When a person is in a well-lighted room, the iris decreases the size of the pupil so that a low amount or medium amount of light is absorbed into the pupil. Also when an individual steps into a dark room the iris increases the size of the pupil so that a high amount of light penetrates the pupil.
Hence without the iris the amount of light that enters the eye cannot be controlled.
Point P is located 1.7 m from fixed point charge q. The electric field Ē at point P is 8.6 x
10-2 N/C, directed away from the point charge. What is the magnitude of q? Let the
electrostatic constant k = 8.99 x 10°N • m²/C2.
O
A. 2.8 10-11 C
0
B. 4.8 * 10-11 C
O.C. -4.8 x 10-11 C
D. 1.5 x 10-10
Answer:
2.8 × 10^-11 C
Explanation:
The computation of the magnitude of q is shown below;
The electric field at point P because of point charge Q is provided by,
E = 8.6 × 10^-2 N/C
And, the separation between charge Q and P is r = 1.7m
Now According to the Coulomb's law,
E = kQ ÷ r²
8.6 × 10^-2 = 9 × 10^9 × Q ÷ (1.7)²
8.6 × 10^-2 × 2.89 ÷ 9 × 10^9 = Q
Q = (8.6 × 2.89 ÷ 9) × 10^-11
Q = 2.76 × 10^-11 C
= 2.8 × 10^-11 C
A 40-gram block of copper at 95*C is placed in 105 g of water at an unknown temperature. After equilibrium is reached, the final temperature of the water is 24*C. What was the initial temperature of the water?
The initial temperature of the water was approximately 81.67°C.
To solve this problem, we can apply the principle of energy conservation. The heat lost by the copper block is equal to the heat gained by the water.
The heat lost by the copper block can be calculated using the formula: Q1 = m1 * c1 * ΔT1,
where m1 is the mass of the copper block (40 g), c1 is the specific heat capacity of copper (0.39 J/g°C), and ΔT1 is the change in temperature (final temperature - initial temperature of the copper block).
The heat gained by the water can be calculated using the formula: Q2 = m2 * c2 * ΔT2, where m2 is the mass of the water (105 g), c2 is the specific heat capacity of water (4.18 J/g°C), and ΔT2 is the change in temperature (final temperature - initial temperature of the water).
Since the copper block and the water reach equilibrium, Q1 = Q2. Therefore, we can equate the two equations:
m1 * c1 * ΔT1 = m2 * c2 * ΔT2
Substituting the given values:
(40 g) * (0.39 J/g°C) * (95°C - initial temperature) = (105 g) * (4.18 J/g°C) * (24°C - initial temperature)
Simplifying the equation and solving for the initial temperature of the water gives us approximately 81.67°C.
for such more questions on temperature
https://brainly.com/question/27944554
#SPJ8
Which do you think requires more Work, lifting a 100 N load a vertical distance of 2 m or lifting a 10 N load a vertical distance of 4 m?
Answer:
Lifting 100 N 2 meters is much more work.
Explanation:
Remark
The formula is F * d = W
Givens
F = 100 N
D = 2 m
or
F = 10 N
D = 4 m
Solution
Work = 100 * 2
Work = 200 Joules
Work = 10 * 4
Work = 40 J
10. The force that causes damage to objects during a collision is
friction
kinetic energy
momentum
inertia
11. Improvement on communication skill is a
A. Social Benefits
B. Emotional Benefits
C. Mental Benefits
D. Physical Benefits
12. Reducing anxiety, depression, and negative mood.
A. Social Benefits
B. Emotional Benefits
C. Mental Benefits
D. Physical Benefits
13. Have stronger bones, muscles and joint and lower risk of developing osteoporosis.
A. Social Benefits
B. Emotional Benefits
C. Mental Benefits
D. Physical Benefits
Answer:
11.A
12.C
13.D
Explanation:
12.might be emotional benefits but they are often associated with our mental health , which is why I gave the answer C . its up to u now
If a car has a velocity of 85 km/hr, how long will it take to accelerate to 45 km/hr if the acceleration is -3 km/hr/sec?
Answer:
Time, t = 13.34 seconds.
Explanation:
Given the following data;
Initial velocity, u = 85km/hr to meters per seconds = 85*1000/3600 = 23.61 m/s
Final velocity, v = 45km/hr to meters per seconds = 45*1000/3600 = 12.5 m/s
Acceleration, a = -3 km/hr/sec to meters per seconds square = -3*1000/3600 = -0.833m/s²
To find the time;
Acceleration = (v - u)/t
-0.833 = (12.5 - 23.61)/t
-0.833t = -11.11
t = 11.11/0.833
Time, t = 13.34 seconds.
Ted lifts a 10N weight at a height of 1.5 m in 1 second. Johnny lifts a 10N weight at a height of 1.5 m in 2 second. Which statements are correct? A. Johnny and Ted did the same amount of work B. Ted did more work C. Johnny and Ted expanded the same power D. Ted expanded more power E Johnny did more work F. Johnny expanded more power
Answer:
he affirmations the correct ones are: A and D
Explanation:
To find out which expressions are correct, let's calculate the work and power done by each person
the expression for work is W = F and
the expression for power is P = W / t
In this case the work is positive because the beast is in the same direction of displacement.
Ted
W₁ = 10 1.5
W₁ = 15 J
P₁ = 15/1
P₁ = 15 w
Johnny
the job
W₂ = 10 1.5
W₂ = 15 J
the potential
P₂ = 15/2
P₂ = 7.5 w
therefore we see that the work of both is the same, but Ted developed twice as much power as Johnny
when resisting the affirmations the correct ones are: A and D
True or False – All transformations fit the Law of Conservation of Energy.
Answer:
The correct answer is true.
If you are inside a car and the car is struck by lightning, it is best to stay inside because the electric field inside the car is ________?
Answer:
Get out if the car
Explanation:
Get out of the car because the car could explode by over eclectic power
get out of the car as fast as possible
Who was the first man on planet Jupiter
5. Aunt Jane weighs 145 pounds. What is her weight in Newtons?
Answer:
i think its 644
Explanation:
If a vehicle accelerating at 2.7 m/s2what is it's velocity at 20 meters 12.63m/s,1.03m/s,10.39m/s,6.39m/s
Answer:
The final velocity of the vehicle is 10.39 m/s.
Explanation:
Given;
acceleration of the vehicle, a = 2.7 m/s²
distance moved by the vehicle, d = 20 m
The final velocity of the vehicle is calculated using the following kinematic equation;
v² = u² + 2ah
v² = 0 + 2 x 2.7 x 20
v² = 108
v = √108
v = 10.39 m/s
Therefore, the final velocity of the vehicle is 10.39 m/s.
39. I also use it when I do the homework. (par 1 line 3).
The underlined word has the closest meaning with...
a. assignment
b. agreement
c. dictionary
d. teamwork
Answer:
A
Explanation:
What is the name for the amount of energy transferred every second by an electrical appliance?
The most appropriate term used for the amount of energy transferred every second by an electrical appliance would be electric power.
What is power?The rate of doing work is known as power. The Si unit of power is the watt.
Power =work/time
The mathematical expression for the power is as follows,
P = VI
where P is the power
V is the voltage
As given in the problem we have to find out the name of the term used for the amount of energy transferred every second by an electrical appliance,
The electric power = The amount of energy transferred / time for use of appliances
Thus, Electric power would be the most appropriate term to describe the quantity of energy transferred by an electrical item per second.
To learn more about power from here, refer to the link given below;
brainly.com/question/3854047
#SPJ2
The efficiency of lever is always less than 100%why
Answer:
The output work is always less than the input work because some of the input work is used to overcome friction. Therefore, the efficiency is always less than 100 percent.
A machine with a mechanical advantage of 10 is used to produce an output force of 250 Newton’s. What input force is applied to this machine
Answer:
que tue nesisitas
Explanation:
A 100 N force is applied to a pulley to lift a 500 N object. What is the actual mechanical advantage of the pulley?
Please help, I'm tired of trolls.
explain about the laws of reflection
Answer:
The law of reflection states that the angle of reflection equals the angle of incidence—θr = θi. The angles are measured relative to the perpendicular to the surface at the point where the ray strikes the surface.
Explanation:
mark me as brainliest
URGENT PLEASE HELP!!!! GIVING BRAINLIEST!! If you answer this correctly ill answer some of your questions you have posted! (60pts)
Answer:
5
Explanation:
100 newtons pulling a 500 newton object has the mechanical advantage of 5 since it pulled 5x its weight
the expression is simple: 500/100= 5 (5 is the mechanical advantage)
pls mark me brainliest if this is right lol ty
10. Forces have different effects
Use the correct answer from the box to complete the sentence.
Slowing
Stretching
Turning
The moment of a force is the __________ effect of the force
Answer:
turning
Explanation:
because the moment of a force is for pivots
the moment of a force can be clockwise motion and anti clockwise motion
hope this helps
Where is the magnet that causes Earth’s magnetic field? What is this magnet made of?
HELPPPP PLEASEE!
Answer:
The magnetic field of Earth is created by currents of electricity that flow in the molten center.
Explanation:
What is it called when you extend the graph, along the same slope, above or below measured data?
a. Extrapolate
b. Interpolate
a. Examine
d. Experiment
b interpolate loskkdkskmdrmdr
How many atoms are in 3MgCl2?
Answer:
3MgCl2 has 9 atoms.
Explanation:
The Element Magnesium (Mg) has 3 atoms.
The Element Chloride (Cl) has 6 attoms.
Their fore 6 + 3 is 9 of course. 3MgCl2 has 9 atoms.
BTW: 3MgCl2 is a molecular compound as well as H2O and CO2.
PLS HELP
1.) When there are equal forces from opposite directions acting on an object, the forces are said to be which of the following? (4 points)
A.) Positive
B.) Negative
C.) Balanced
D.) Gravitational
2.) If you want to cause an object to move, what should you do? (4 points)
A.) Apply balanced forces.
B.) Apply neutral forces.
C.) Apply potential forces
D.) Apply unbalanced forces.
Answer:
B
Explanation:
Are all sound frequencies audible to the human ear? Why or Why not?
Answer:
thank you
Explanation:
Why are very high temperatures and pressures required for fusion to occur?
to generate the neutrons that are needed to break the nuclei
to overcome the repulsion between the protons in the nuclei that join
to maintain the proper conditions to keep the chain reaction going
to keep the uranium fuel separate from the control rods
Answer:
so as to over come the repulsion between the protons in nuclei that join
Explanation:
it requires high temperature so that the nucleus starts moving at rapid speed which in turn increases their kinetic
In nuclear reactions, very high temperatures and pressures required for fusion to occur so as to to overcome the repulsion between the protons in the nuclei that join.
What are nuclear reactions?There are two types of nuclear reactions which are nuclear fusion and nuclear fission .They involve the combination and disintegration of the element's nucleus respectively.
In nuclear fission, the nucleus of the atom is bombarded with electrons of low energy which splits the nucleus in to two parts .Large amount of energy is released in the process.It is used in nuclear power reactors as it produces large amount of energy.
In nuclear fusion,on the other hand, is a reaction which occurs when two or more atoms combine to form a heavy nucleus.Large amount of energy is released in the process which is greater than that of the energy which is released in nuclear fission process.
Learn more about nuclear reactions,here:
https://brainly.com/question/16526663
#SPJ7
If the force causing a mass to accelerate is multiplied by a number while keeping the mass the same, what happens to the acceleration of the object?
Answer: If mass remains constant and you double the force you will double the acceleration.
If an element forms a 2+ ion, in which group of the periodic table would you expect to find it? A. 2 B. 1 O c. 17 D. 18
Answer:
A
Explanation:
It would be with the group 2 metals.
Which person has kinetic energy but does not have potential energy?
Answer:
a person walking on a flat side walk
Explanation:
hope this helped :)