Write a balanced equation out of these chemicals

Answer:

(C) 180.0 g of C6H12O6 dissolved in 500.0 mL of solution

Explanation:

Molarity is mole/volume.

1. Find the mass of C6H12O6 in 1 Liter of 2.0 solution

(2 mol C6H12O6 / L) * (180 g / mol C6H12O6) = 360 g C6H12O6

There are 360 g C6H12O6 in 1000 mL of solution

2. Compare the value you found in step 1 to each of the multiple choice answers.

180.0 g of C6H12O6 dissolved in 500.0 mL of solution is exactly proportional to 360 g C6H12O6 in 1000 mL of solution.

The preparation which produces a 2.0 M solution of C₆H₁₂O₆ is 180.0 g of C₆H₁₂O₆ dissolved in 500.0 mL of solution.

Molarity is defined as the number of moles of solute present in per liter of solution.

Moles of any substance will be calculated as :

n = W/M, where

W = given mass

M = molar mass

In the question given that molar mass of C₆H₁₂O₆ is 180 g/mole, and let we have produced the solution of 2 molarity by these amount in 1 liter i.e.

2 = n/1

n = 2 moles

Now by using these moles we can calculate the required mass of C₆H₁₂O₆ as:
2 = W/180

W = 360g

From this it is clear that for the preparation of 1 liter of solution of 2 molarity 360g of C₆H₁₂O₆ is required. So in 500mL of solution, 180 g of C₆H₁₂O₆ will use.

Hence, option (C) is correct i.e. 180.0 g of C₆H₁₂O₆ dissolved in 500.0 mL of solution.

To know kore about molarity, visit the below link:

https://brainly.com/question/16343005

Answer:

Aluminum oxide (Al₂O₃)

Explanation:

The standard heat (or enthalpy) of formation of a compound, is the amount of change in the enthalpy that takes place when 1 mole of the compound is produced from the elements it contains whereby the compounds and elements in the reaction are in their standard states

The standard state of an element, is the state in which the element is in the most stable form at a pressure of 1 bar

Therefore, the heat of formation of hydrogen, H₂, oxygen, O₂, and potassium, (K), will have a heat of formation of zero, while Al₂O₃ which is made of aluminum and oxygen in combining to form a compound in proportions which are different from their initial standard states will have a heat of formation not equal to zero

Answer:

It partially ionizes

Explanation:

Higher tier) Weak acids only partially ionise in water. Only a small fraction of their molecules break into hydrogen ions when added to water.

Answer:

34.92 grams NaCl (in 1 L of solution)

Explanation:

The chemical formula of sodium chloride is NaCl. From the formula, we can calculate the molar mass of NaCl:

MM(NaCl)= MM(Na) + MM(Cl) = 23 g/mol + 35.4 g/mol = 58.4 g/mol

A solution of NaCl with a molarity of 0.598 M has 0.598 moles of NaCl per liter of solution. So, we multiply the moles by the molar mass of NaCl to calculate the mass we need:

mass of NaCl = 0.598 mol x 58.4 g/mol = 34.92 g NaCl

Therefore, we need 34.92 grams of NaCl to prepare 1 liter of a solution with a molarity of 0.598 M.

Answer:

C5P4

Explanation:

the answer is C5P4 because penta is 5 and tetra is 4

Answer:

HI

H₂O

H₃O⁺

I⁻

Explanation:

Bronsted-Lowry acids are chemicals that can donate protons, and Bronsted-Lowry bases are chemicals that can accept them. Conjugate bases and acids are the resulting effect of losing or gaining a proton in the form of H⁺.

Answer:

0.075 moles of iron oxide would be produced by complete reaction of 0.15  moles of iron.

Explanation:

The balanced reaction is:

4 Fe + 3 O₂ → 2 Fe₂O₃

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

You can apply the following rule of three: if by stoichiometry 4 moles of Fe produce 2 moles of Fe₂O₃, 0.15 moles of Fe produce how many moles of Fe₂O₃?

[tex]moles of Fe_{2} O_{3} =\frac{0.15 moles of Fe*2 moles of Fe_{2} O_{3} }{4 moles of Fe}[/tex]

moles of Fe₂O₃= 0.075

0.075 moles of iron oxide would be produced by complete reaction of 0.15  moles of iron.

They are found in all living things. Hence, option D is correct.

An atom is any particle of matter which contains at least one proton.

Carbon is stored in plants and trees. Plants take carbon dioxide from the atmosphere to make the building blocks of food during photosynthesis. Carbon is stored in the hydrosphere and dissolved in ocean water and lakes. Carbon is used by several organisms to produce shells.

Hence, option D is correct.

Learn more about atom here:

https://brainly.com/question/1566330

#SPJ5

Answer: A planet from a rain forest would not survive in a desert home, for the fact they depend on water and as these live from water, without it, this leads to dehydration and with loss of water with plants, nothing is able to survive when it comes to a rain forest plant being in a desert home. Another reason is the high trees and leaves that are providing the plants enough sunlight or shade to grow, it guarantees to help keep the temperature normal. Being in a deserted area would mean that there would be a temperature change, something the plant is not used to. Without that needed shade and avoiding the scorching sun, they will die out from how different the temperature is, and how hot it is.

Explanation: I hope this helped you.

okay, the answer should be simple and easy, plants from a rainforest would not survive in a desert because the plants in the rainforest do get water, sunlight and air whereas the plants in the desert have Sunlight which is very hot. so if a plant in the rainforest was transferred to the desert it will hard to survive and it will eventually die because they will not get water that will be needed and the plant can get sunburns with the too hot temperature.

Answer:

See Explanation

Explanation:

In discussing the reason why Et₃SiCl is more easily hydrolysed than Et₃CCl, we must remember that the electronegativity difference between silicon and chlorine is much higher than the electronegativity difference between carbon and chlorine.

As a result of this, the Si-Cl bond in Et₃SiCl is more polar and hence susceptible to attack by water than the C-Cl bond in Et₃CCl.

Also, it is postulated that the presence of vacant d orbitals on silicon assists hydrolysis in Et₃SiCl. Such vacant orbitals are absent in carbon hence Et₃CCl does not undergo hydrolysis.

The reaction scheme is shown in the image attached to this answer.

Answer:

Have anyone found the answer to this? I’m on this grade result course right now

Explanation:

The concentration of a potassium manganate(VII) solution (KMnO4) is 10 g /L. What is the concentration of this solution in molarity is 0.06 M.

The ratio of number of moles of solute to the volume of the solution in litre is called molarity. it is denoted by symbol M.

Given concentration (C) of potassium manganate(VII) solution in g/L is 10 g /L

Molarity = C/molar mass of KMnO4 = 10g/L ÷ 158.02g/mol = 0.06 mol/L

To learn more about molarity here.

https://brainly.com/question/2817451

#SPJ3

Answer:

433 m

Explanation:

Since the fall represents motion under gravity, we use the equation

s = ut - 1/2gt² where s = height of cliff or distance bowling ball falls through, u = initial velocity of bowling ball = 0 m/s(since it starts from rest), t = time = 9.4 s and g = acceleration due to gravity = -9.8 m/s².

So, substituting the values of the variables into the equation, we have

s = 0 m/s × 9.4 s - 1/2 × 9.8 m/s² × (9.4 s)²

s = 0 m - 1/2 × -9.8 m/s² × 88.36 s²

s = 1/2(865.928 m)

s = 432.964

s ≅ 433 m

The presence of rust in the water of Westfield is the reason for the change in colour.

The water of Westfield has reddish-brown substance. This reddish brown substance in the water is the rust which formed due to the chemical reaction between the iron pipes and the fertilizer substance present in the water.

Due to this reaction, the colour of Westfield's water is different from normal type of water so we can conclude that the presence of rust in the water of Westfield is the reason for the change in colour.

Learn more about rust here: https://brainly.com/question/1477535

Answer:

one quarter of the original amount, so 0.25 g

Explanation:

Answer:

C

Explanation:

Explanation:

[tex]PV = nRT \\ (200000 \times 3.5 \times {10}^{ - 6} ) = n \times 8.314 \times 300 \\ n = \frac{0.07}{2494.2 } \\ n = 2.81 \times {10}^{ - 5} [/tex]

[tex] \small{ \star{ \underline{ \blue{ becker}}}}[/tex]

Answer:

1. Allele for shortness (t)

2. Allele for tallness (T)

Explanation:

Gregor Mendel performed numerous experiments using pea plants (Pisium sativum). He tested the height traits of pea plants by crossing tall pea plants (TT) and short pea plants (tt) to obtain offsprings that were all tall (Tt) in the first filial generation (F1).

This is possible because the allele for tallness is DOMINANT while the allele for shortness is RECESSIVE. This means that tallness allele (T) will mask the phenotypic expression of shortness allele (t) when in an heterozygous state (Tt) as in the F1 generation.

Answer:

54.93 g/mol

Explanation:

a) the element with symbol Mn is known as Manganese and I figured it out by looking at the periodic table.

b) I took a look at the periodic table again, and seen how much the atomic mass is and from there I observed:

Mn= 54.938 g/mol

rounded is 54.94 g/mol

Answer:

9.0 moles of CaO

Explanation:

We have the reaction equation as follows;

Fe2O3 + Ca3(PO4)2 -------> 2FePO4 + 3CaO

Now we know from the equation that;

1 mole of iron III oxide yields 3 moles of CaO

Therefore;

3 moles of iron III oxide yields 3 * 3/1

= 9.0 moles of CaO

Answer:

The correct answer is - Pine tree.

Explanation:

Coniferous trees or cone-bearing trees normally called conifers adapted their leaves and have needles like leaves that retain more water. Needles do not appear to be leaves but are modified leaves.

Conifer trees adapt this leaf modification to prevent water loss due to transpiration in the case of dry air or atmosphere. Important members of the conifer trees are pine trees, cedars, spruces, and Pines.

Answer:

Not really sure, buts its either B or C.

Answer:

d. Two moles of carbon dioxide were produced from this reaction

Explanation:

The given chemical reaction can be written as follows;

2C₂H₂ + 5O₂ → 4CO₂ + 2H₂O

From the above chemical reaction, we have;

Two moles of C₂H₂ reacts with five moles of O₂ to produce four moles of CO₂ and two moles of H₂O

We have;

One mole of C₂H₂ will react with two and half moles of O₂ to produce two moles of CO₂ and one mole of H₂O

Therefore, in the above reaction, when one mole of C₂H₂ is used, two moles of CO₂ will be produced.

Answer:

The restoring force that prevents the furniture from tipping over when pushing the furniture towards the right, F= W × D

Where;

W = The weight of the furniture

D = The horizontal distance from the center of gravity of the furniture, CG and the to the lower right corner of the furniture

Given that A > D, for the furniture to tip over when pushing above the CG, we have;

F1 × A ≤ W × D

∴ F1 << W or for a force much smaller than W, the weight of the furniture applied above the center of gravity, the furniture will tip over

However when the force F2 is applied, where C < D, we have for no tipping over;

F2 × C ≤ W × D, therefore, given that C < D, when a force much higher than the weight, W, is applied at F2, the furniture will remain upright

Therefore, it is better push at a point lower than or equal to the center of gravity, whereby the point B is lower than the center of gravity, it is better to push at point B, Ravleen is correct and it is better to push at point B because the center of gravity is lower

If the furniture is pushed at the wrong spot it may tip over

Please see attached drawing

Explanation:

Coal is extracted by mining.

Once coal has been extracted, it can be used directly  for heating and industrial processes or to fuel power plants for electricity.

Benefits are:

Coal energy is an affordable energy source because of the coal's stable price compared to other fuel sources.

Coal is easy to burn.

Coal produces high energy upon combustion.

Coal energy is inexpensive.

Answer:

Yes but will take a very very long time for them to adapt most will die but as gemeration passes they will get used to it

The question is incomplete, the complete question is;

Arrange the following ionic compounds in order of decreasing amount of energy released in lattice formation: NaF, MgS, TlN, and CsI.

Answer:

TlN> MgS > NaF > CsI

Explanation:

Recall that lattice energy is the energy evolved when a crystal lattice is formed from its component ions.

The lattice energy depends on the size of the ions. The smaller the sizes of the ions, the larger the lattice energy.

The order of energy released in lattice formation for these compounds is;

TlN> MgS > NaF > CsI

Answer:

c)

Explanation:

add water to the acid to decrease its molarity

Answer:

the addition to solute decreases the solvent's vapor pressure. a temperature must then be applied to overcome the change

Explanation:

Answer:

long story short: A

Explanation: