Answer:
Check Explanation.
Explanation:
Formation reactions are chemical reactions where one mole of a compound is produced from its constituent elements in their standard states.
NaBr (s)
The Standard formation reaction is
Na (s) + (1/2)Br₂ (g) → NaBr (s)
Using appendix C, the standard heat of formation of NaBr(s) is
ΔH∘f = -359.8 kJ/mol.
SO₃ (g)
The Standard formation reaction is
S (s) + (3/2) O₂ (g) → SO₃ (g)
Using appendix C, the standard heat of formation of SO₃(g) is
ΔH∘f = -395.2 kJ/mol.
Pb(NO₃)₂ (s)
The Standard formation reaction is
Pb (s) + N₂ (g) + 3O₂ (g) → Pb(NO₃)₂ (s)
Using appendix C, the standard heat of formation of Pb(NO₃)₂(s) is
ΔH∘f = -451.9 kJ/mol.
Hope this Helps!!!
Answer:
Explanation:
Formation reactions are chemical reactions where one mole of a compound is produced from its constituent elements in their standard states.
Chemistry question. Image attached.
Answer:
The answer to your question is given below
Explanation:
The balanced equation for the reaction is given below:
CaO(s) + CH4(g) + 2H2O(g) <=> CaCO3(s) + 4H2(g)
1. Writing an expression for the equilibrium constant, K.
The equilibrium constant, K for a reaction is simply the ratio of the concentration of the products raised to their coefficient to the concentration of the reactants raised to their coefficient.
Thus, we can write the equilibrium constant, K for the reaction as follow:
CaO(s) + CH4(g) + 2H2O(g) <=> CaCO3(s) + 4H2(g)
K = [CaCO3] [H2]⁴ / [CaO] [CH4] [H2O]²
2. Based on the value of K, more products will be in the equilibrium mixture since the value of K is a positive large number.
Homolysis, or homolytic bond dissociation, produces a very specific type of product under certain reaction conditions. In Part 1, select all the products (in formulae and general chemical terms) that could result from homolysis. In Part 2, select the reaction conditions that are most likely to promote homolysis.
Part 1. Choose all that may occur as possible products of a homolysis reaction.
Choose one or more:_______.
a. hydride ion
b. R3CO
c. Br2
d. H
e. a carbocation
f. H3C
g. H3CO-
h. hydrogen ion
i. a carbon free radical
Part 2. Choose the conditions under which homolysis is likely to occur.
Choose one or more:_______.
a. strong base
b. ultraviolet irradiation
c. high temperature
d. strong acid
e. infrared irradiation
f. low temperature
Answer:
1) R₃CO , H, H₃C, a carbon free radical
2) high temperature, ultraviolet irradiation
Explanation:
1) Homolysis leads to the formation of free radicals (species having a free electron). Thus, answer is :
R₃CO
H
H₃C
a carbon free radical
2) Homolysis require high temperature, ultraviolet irradiation.
A 1.00 liter solution contains 0.31 M sodium acetate and 0.40 M acetic acid. If 0.100 moles of barium hydroxide are added to this system, indicate whether the following statements are TRUE or FALSE . (Assume that the volume does not change upon the addition of barium hydroxide.)
a. The number of moles of CH3COOH will remain the same.
b. The number of moles of CH3COO- will increase.
c. The equilibrium concentration of H3O+ will decrease.
d. The pH will decrease.
e. The ratio of [CH3COOH] / [CH3COO-] will remain the same.
Answer and Explanation:
The buffer solution is composed by sodium acetate (CH₃COONa) and acetic acid (CH₃COOH). Thus, CH₃COOH is the weak acid and CH₃COO⁻ is the conjugate base, derived from the salt CH₃COONa.
If we add a strong base, such as barium hydroxide, Ba(OH)₂, the base will dissociate completely to give OH⁻ ions, as follows:
Ba(OH)₂ ⇒ Ba²⁺ + 2 OH⁻
The OH⁻ ions will react with the acid (CH₃COOH) to form the conjugate base CH₃COO⁻.
Initial number of moles of CH₃COOH = 0.40 mol/L x 1 L = 0.40 mol
Initial number of moles of CHCOO⁻= 0.31 mol/L x 1 L = 0.31 mol
moles of OH- added: 2 OH-/mol x 0.100 mol/L x 1 L = 0.200 OH-
According to this, the following are the answers to the sentences:
a. The number of moles of CH₃COOH will remain the same ⇒ FALSE
The number of moles of CH₃COOH will decrease, because they will react with OH⁻ ions
b. The number of moles of CH₃COO⁻ will increase ⇒ TRUE
Moles of CH₃COO⁻ will be formed from the reaction of the acid (CH₃COOH) with the base (OH⁻ ions)
c. The equilibrium concentration of H₃O⁺ will decrease ⇒ FALSE
The equilibrium concentration of OH⁻ is increased
d. The pH will decrease⇒ FALSE
pKa for acetic acid is 4.75. We add the moles of base to the acid concentration and we remove the same number of moles from the conjugate base in the Henderson-Hasselbach equation to calculate pH:
[tex]pH= pKa + log \frac{[conjugate base + base]}{[acid - base]}[/tex]
pH = 4.75 + log (0.31 mol + 0.20 mol)/(0.40 mol - 0.20 mol) = 5.15
Thus, the pH will increase.
what is the electron configuration of the iodide ion?
A. 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁶4d¹⁰5s²
B. 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁶
C. 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁶4d¹⁰5s²5p⁶
D. 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁶4d¹⁰
Answer:
the answer to this question is C
The electron configuration of the iodide ion is 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁶4d¹⁰5s²5p⁶. The correct option is option C.
What is electron configuration ?The arrangement of an atom's or molecule's electrons in their respective atomic or molecular orbitals is known as its electron configuration; for instance, the electron configuration of the neon atom is 1s2 2s2 2p6.
According to electronic configurations, electrons move individually within each orbital while interacting with the average field produced by all other orbitals. The corrosion potential and reactivity of an atom may be calculated from its electron configuration. The electron configuration of the iodide ion is 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁶4d¹⁰5s²5p⁶.
Therefore, the correct option is option C.
To learn more about electron configuration, here:
https://brainly.com/question/30161188
#SPJ6
If you start with 512 grams of aluminum and 1147 grams of copper chloride to make aluminum chloride and copper, what is the limiting reagent? 2Al + 3CuCl -> 2AlCl3 + 3Cu
Answer:
Copper (II) chloride.
Explanation:
Hello,
In this case, considering the described reaction which is also given as:
[tex]2Al + 3CuCl_2 \rightarrow 2AlCl_3 + 3Cu[/tex]
For us to identify the limiting reactant we first compute the available moles of aluminium:
[tex]n_{Al}=512gAl*\frac{1molAl}{27gAl}=19.0molAl[/tex]
Next, we compute the consumed moles of aluminium by the 1147 grams of copper (II) chloride by using their 2:3 molar ratio:
[tex]n_{Al}^{consumed}=1147gCuCl_2*\frac{1molCuCl_2}{134.45gCuCl_2}*\frac{2molAl}{3molCuCl_2} =5.69molAl[/tex]
Thereby, we can infer aluminium is in excess since less moles are consumed than available whereas the copper (II) chloride is the limiting reactant.
Best regards.
If the vinegar were measured volumetrically (e.g., a pipet), what additional piece of data would be needed to complete the calculations for the experiment?
Answer:
the density if vinegar will also be needed
Explanation:
Because this is an experiment of volumetric analysis
Note the dynamic equilibrium in the opening photo which solution changes color when the pH of both solutions is increased explain?
Answer:
The colour of the orange solution becomes yellow.
Explanation:
1. Before adding NaOH
Assume the picture showed a beaker of potassium chromate and one of potassium dichromate.
Both solutions are involved in the same equilibrium:
[tex]\rm\underbrace{\hbox{2CrO$_{4}^{2-}$(aq)}}_{\text{yellow}} +2H^{+}(aq) \rightleftharpoons \, \underbrace{\hbox{Cr$_{2}$O$_{7}^{2-}$}}_{\text{orange}} + H_{2}O[/tex]
The first beaker contains mostly chromate ions with a few dichromate ions.
The position of equilibrium lies to the left and the solution is yellow.
The second beaker contains mostly dichromate ions with a few chromate ions.
The position of equilibrium lies to the right and the solution is orange.
2. After adding NaOH
According to Le Châtelier's Principle, when we apply a stress to a system at equilibrium, the system will respond in a way that tends to relieve the stress.
Beaker 1
If you add OH⁻ to the equilibrium solution, it removes the H⁺ (by forming water).
The system responds by having the dichromate react with water to replace the H⁺.
At the same time, the system forms more of the yellow chromate ion.
The position of equilibrium shifts to the left.
However, the solution is already yellow, so you see no change in colour.
Beaker 2
The reaction is the same as in Beaker 1.
This time, however, as the dichromate ion disappears, do does its orange colour.
Also, the yellow chromate is being formed and its yellow colour appears .
The colour changes from orange to yellow.
A sample of gas is observed to effuse through a pourous barrier in 4.98 minutes. Under the same conditions, the same number of moles of an unknown gas requires 6.34 minutes to effuse through the same barrier. The molar mass of the unknown gas is:________.
g/mol.
Answer:
The molar mass of the unknown gas is [tex]\mathbf{ 51.865 \ g/mol}[/tex]
Explanation:
Let assume that the gas is O2 gas
O2 gas is to effuse through a porous barrier in time t₁ = 4.98 minutes.
Under the same conditions;
the same number of moles of an unknown gas requires time t₂ = 6.34 minutes to effuse through the same barrier.
From Graham's Law of Diffusion;
Graham's Law of Diffusion states that, at a constant temperature and pressure; the rate of diffusion of a gas is inversely proportional to the square root of its density.
i.e
[tex]R \ \alpha \ \dfrac{1}{\sqrt{d}}[/tex]
[tex]R = \dfrac{k}{d}[/tex] where K = constant
If we compare the rate o diffusion of two gases;
[tex]\dfrac{R_1}{R_2}= {\sqrt{\dfrac{d_2}{d_1}}[/tex]
Since the density of a gas d is proportional to its relative molecular mass M. Then;
[tex]\dfrac{R_1}{R_2}= {\sqrt{\dfrac{M_2}{M_1}}[/tex]
Rate is the reciprocal of time ; i.e
[tex]R = \dfrac{1}{t}[/tex]
Thus; replacing the value of R into the above previous equation;we have:
[tex]\dfrac{R_1}{R_2}={\dfrac{t_2}{t_1}}[/tex]
We can equally say:
[tex]{\dfrac{t_2}{t_1}}= {\sqrt{\dfrac{M_2}{M_1}}[/tex]
[tex]{\dfrac{6.34}{4.98}}= {\sqrt{\dfrac{M_2}{32}}[/tex]
[tex]M_2 = 32 \times ( \dfrac{6.34}{4.98})^2[/tex]
[tex]M_2 = 32 \times ( 1.273092369)^2[/tex]
[tex]M_2 = 32 \times 1.62076418[/tex]
[tex]\mathbf{M_2 = 51.865 \ g/mol}[/tex]
What is the absolute magnitude of the rate of change for [NH3] if the
rate of change for [Hz] is 9.00 M/s in the reaction 2 NH3(g) → N2(g) +
3 H2(g)?
Answer:
[tex]r_{NH_3,abs} =6.00\frac{M}{s}[/tex]
Explanation:
Hello,
In this case, we can write the law of mass action for the undergoing chemical reaction, based on the rates and the stoichiometric coefficients:
[tex]\frac{1}{-2}r_{NH_3} =\frac{1}{1} r_{N_2}=\frac{1}{3}r_{H_2}[/tex]
In such a way, knowing the rate of formation hydrogen (H₂), we can know the rate of change of ammonia, that must be negative for consumption:
[tex]r_{NH_3} =\frac{-2}{3}r_{H_2}=\frac{-2}{3}*9.00\frac{M}{s} \\\\r_{NH_3} =-6.00\frac{M}{s}[/tex]
Nevertheless, the absolute magnitude will be positive:
[tex]r_{NH_3,abs} =6.00\frac{M}{s}[/tex]
Best regards.
neeeeed helpppppppppp
Answer:
Option C. Will always.
Explanation:
A spontaneous reaction is a reaction that occurs without an external supply of heat.
This implies that spontaneous reaction will always occur as no external supply of heat is needed.
You use 10.0 mL of solution A, 10.0 mL of solution B, and 70.0 mL of water for your first mixture. What is the initial concentration of KIO3
Complete Question
The complete question is shown on the first uploaded image
Answer:
The initial concentration is [tex]C_f = 0.0022 \ M[/tex]
Explanation:
From the question we are told that
The volume of solution A is [tex]V_i = 10.0 mL[/tex]
The concentration of A is [tex]C_i = 0.0200 \ M[/tex]
The volume of solution B is [tex]V_B = 10.0mL[/tex]
The volume of water is [tex]V_{w } = 70.0 mL[/tex]
Generally the law of dilution is mathematically represented as
[tex]C_i * V_i = C_f * V_f[/tex]
Where [tex]C_f[/tex] is the concentration of the mixture
[tex]V_f[/tex] is the volume of the mixture which is mathematically evaluated as
[tex]V_f = 10 + 10 + 70[/tex]
[tex]V_f = 90mL[/tex]
So
[tex]C_f = \frac{C_i * V_i}{ V_f}[/tex]
substituting values
[tex]C_f = \frac{0.0200 * 10 }{90}[/tex]
[tex]C_f = 0.0022 \ M[/tex]
Note the mixture obtained is [tex]KIO_3[/tex]
When 13.6 g of calcium chloride, CaCl2, was dissolved in 100.0 mL of water in a coffee cup calorimeter, the temperature rose from 25.00 °C to 31.75 °C. Determine the ∆Hrxn in kJ/mol for the reaction as written below. Assume that the density of the solutions is 1.000 g/mL, and that the specific heat capacity of the solutions is that of pure water. Must show your work (scratch paper) to receive credit.
Answer:
THE ENTHALPY OF SOLUTION IS 3153.43 J/MOL OR 3.15 KJ/MOL.
Explanation:
1. write out the variables given:
Mass of Calcium chloride = 13.6 g
Change in temperature = 31.75°C - 25.00°C = 6.75 °C
Density of the solution = 1.000 g/mL
Volume = 100.0 mL = 100.0 mL
Specific heat of water = 4.184 J/g °C
Mass of the water = unknown
2. calculate the mass of waterinvolved:
We must first calculate the mass of water in the bomb calorimeter
Mass = density * volume
Mass = 1.000 * 100
Mass = 0.01 g
3. calculate the quantity of heat evolved:
Next is to calculate the quantity of heat evolved from the reaction
Heat = mass * specific heat of water * change in temperature
Heat = mass of water * specific heat *change in temperature
Heat = 13.6 g * 4.184 * 6.75
Heat = 13.6 g * 4.184 J/g °C * 6.75 °C
Heat = 384.09 J
Hence, 384.09J is the quantity of heat involved in the reaction of 13.6 g of calcium chloride in the calorimeter.
4. calculate the molar mass of CaCl2:
Next is to calculate the molar mas of CaCl2
Molar mass = ( 40 + 35.5 *2) = 111 g/mol
The number of moles of 13.6 g of CaCl2 is then:
Number of moles of CaCl2 = mass / molar mass
Number of moles = 13.6 g / 111 g/mol
Number of moles = 0.1225 mol
So 384.09 J of heat was involved in the reaction of 1.6 g of CaCl2 in a calorimter which translates to 0.1225 mol of CaCl2..
5. Calculate the enthalpy of solution in kJ/mol:
If 1 mole of CaCl2 is involved, the heat evolved is therefore:
Heat per mole = 384.09 J / 0.1225 mol
Heat = 3 135.43 J/mol
The enthalpy of solution is therefore 3153.43 J/mol or 3.15 kJ/mol.
The element nitrogen forms a(n) _______ with the charge . The symbol for this ion is , and the name is . The number of electrons in this ion is .
Answer:
The element nitrogen forms an anion with the charge -3. The symbol for this ion is N³⁻, and the name is nitride. The number of electrons in this ion is 10.
Explanation:
The element nitrogen is in the Group 15 in the Periodic Table, so it tends to gain 3 electrons (3 negative charges) to fill its valance shell with 8 electrons.
The element nitrogen forms an anion with the charge -3. The symbol for this ion is N³⁻, and the name is nitride. The number of electrons in this ion is 10 (the original 7 plus the 3 gained). It is isoelectronic with the gas Neon, which accounts for its stability.
A 10.0 mL sample of calcium hydroxide solution required 26.85 mL of 0.225 M hydrochloric acid for neutralization. The balanced equation is:
Answer:
[tex]C_{base}=0.302M[/tex]
Explanation:
Hello,
In this case, we can evidence that when calcium hydroxide solution reacts with hydrochloric acid solution, the balanced neutralization reaction turns out:
[tex]2HCl(aq)+Ca(OH)_2\rightarrow CaCl_2(aq)+2H_2O(l)[/tex]
Moreover, the concentration of neutralized calcium hydroxide can be computed by using the 2:1 mole ratio between the base and the acid:
[tex]C_{acid}V_{acid}=2*C_{base}V_{base}\\\\C_{base}=\frac{C_{acid}V_{acid}}{2*V_{base}} =\frac{0.225M*26.85mL}{2*10.0mL}\\ \\C_{base}=0.302M[/tex]
Regards.
Which example involves a phase change in which heat energy is released by the substance?
Ofreezing ice cream
O cooking a pot of soup
O melting ice under sunlight
O watching frost disappear into air
Answer:
Cooking a pot of soup
Explanation:
id say that because when you freeze ice cream, its already frozen, so no heat is being released. melting ice wouldn't be the answer because, once again, it is already frozen, and no heat is being released.
Answer:
the correct answer is freezing ice cream
Explanation:
i took the test & got this question correct. also, heat energy is released when freezing because there is no heat energy involved.
Identify each of the following half-reactions as either an oxidation half-reaction or a reduction half-reaction.
H2(g) → 2H+(aq) + 2e- oxidation
Cu2+(aq) → + 2e-Cu(s) reduction
Write a balanced equation for the overall redox reaction. Use smallest possible integer coefficients.
Answer:
H₂(g) + Cu²⁺(aq) → 2H⁺(aq) + Cu(s)
Explanation:
In a redox reaction, one half-reaction is the oxidation (where the atom loss electrons) whereas the other reaction is the reduction (Where the atom is gaining electrons.
In the reactions:
H₂(g) → 2H⁺(aq) + 2e⁻ oxidation
Here, the reaction is written as the oxidation because the hydrogen H₂ is in oxidation state 0 and H⁺ in +1. That means each atom is loosing one electron.
Cu²⁺(aq) + 2e⁻ → Cu(s) reduction
And here, the Cu²⁺ is in +2 oxidation state and after the reaction is in Cu(s) 0 state. Thus, each atom is gaining 2 electrons.
The sum of both reactions is:
H₂(g) + Cu²⁺(aq) + 2e⁻ → 2H⁺(aq) + 2e⁻ + Cu(s)
Subtracting the electrons in both sides of the reaction:
H₂(g) + Cu²⁺(aq) → 2H⁺(aq) + Cu(s)If 3.10 moles of P4010 reacted with excess water, how many grams of H3PO4
would be produced?
P4010 +6H20 + 4H3PO4
You Answered
126 g
0 0.007918
Correct Answer
O 1220 g
0.1278
75.98
Answer:
1.22 × 10³ g
Explanation:
Step 1: Write the balanced equation
P₄O₁₀ + 6 H₂O ⇒ 4 H₃PO₄
Step 2: Calculate the moles of H₃PO₄ produced by 3.10 moles of P₄O₁₀
The molar ratio of P₄O₁₀ to H₃PO₄ is 1:4. The moles of H₃PO₄ produced are 4/1 × 3.10 mol = 12.4 mol
Step 3: Calculate the mass corresponding to 12.4 moles of H₃PO₄
The molar mass of H₃PO₄ is 97.99 g/mol.
[tex]12.4 mol \times \frac{97.99g}{mol} = 1.22 \times 10^{3} g[/tex]
Answer these questions, please.
Answer:
1a. 0.89 gcm¯³
1b. Yes.
1c. Tetrahydrofuran.
2. 0.54 g/mL
Explanation:
1. Data obtained from the question include:
Volume = 0.988 L = 988 cm³
Mass = 879 g
1a. Determination of the density
Density = mass /volume
Density = 879/ 988
Density = 0.89 gcm¯³
Therefore, the density of the liquid is 0.89 gcm¯³
1b. From the given data, it is possible to determine the identity of the liquid.
1c. The density of the liquid is 0.89 gcm¯³. Comparing the density of the liquid obtained with those given in the table, the liquid is tetrahydrofuran
2. Data obtained from the question include:
Mass of empty cylinder = 5.25 g
Mass of cylinder and sodium thiosulfate = 75.82 g
Volume = 130.63 mL
Next, we shall determine the mass of sodium thiosulfate. This can be obtain as follow:
Mass of empty cylinder = 5.25 g
Mass of cylinder and sodium thiosulfate = 75.82 g
Mass of sodium thiosulfate =.?
Mass of sodium thiosulfate = Mass of cylinder and sodium thiosulfate – Mass of empty cylinder
Mass of sodium thiosulfate = 75.82 – 5.25
Mass of sodium thiosulfate = 70.57 g
Finally, we shall determine the concentration of the sodium thiosulfate as follow:
Mass = 70.57 g
Volume = 130.63 mL
Concentration =?
Concentration = mass /volume
Concentration = 70.57/130.63
Concentration = 0.54 g/mL
The concentration of the solution is 0.54 g/mL
What is a ‘control’ in an experiment?
A. A version of the experiment that is unchanged to make sure the experimental data is not due to chance.
B. A person who oversees the experiment to make sure it is following proper procedures.
C. The variable controlled by the scientist to affect the dependent variable.
D. The name for the set of independent and dependent variables that will be controlled by the scientist.
need help asap got 1 minute
D. The name for the set of independent and dependent variables that will be controlled by the scientist.
The statement, that describes the ‘control’ in an experiment is "the name for the set of independent and dependent variables that will be controlled by the scientist."
What is a control in experiment?A control is an element in an experiment that remains intact or unaffected by other variables. An experiment or observation aiming to minimise the influence of variables other than the independent variable is referred to as a scientific control. It serves as a standard or point of reference against which other test findings are measured.
In a scientific experiment, an independent variable is the variable that is modified or manipulated in order to assess the effects on the dependent variable. In a scientific experiment, the dependent variable is the variable that is being tested and measured. The designation given to the set of independent and dependent variables that the scientist will regulate.
Hence the correct option is D.
Learn more about control in an experiment here
https://brainly.in/question/19374703
#SJP3
HELPPP.
Which of the following is a property of matter?
O A. It takes up space.
OB. It is everywhere.
O C. It is constantly changing.
O D. It cannot be divided.
Answer:
a
Explanation:
Matter can be volume or density. So, this concludes that it is when it takes up space.
Answer: A.
Explanation:
it takes up space
If the charge on the chloride ion is -1, what is the charge on the magnesium ion in the compound MgCl2?
Answer:
+2
Explanation:
Because the charge of the chloride ion is negative, that means that the charge of the magnesium ion must be positive since cations and anions go together, not cation and cation nor anion and anion. Using the "reverse criss-cross method", since the subscript of Mg is 1, that means that this is the lowest whole number ratio so we don't need to worry about simplifying. Therefore, since the charge of Cl is 2, the answer is +2.
How many minutes would be required to electroplate 25.0 grams of chromium by passing a constant current of 4.80 amperes through a solution containing CrCl3
Answer:
483.27 minutes
Explanation:
using second faradays law of electrolysis
Silver crystallizes in a face-centered cubic structure. What is the edge length of the unit cell if the atomic radius of silver is 144 pm?
Answer:
Edge length of the unit cell is 4.07x10⁻¹⁰m
Explanation:
In a face-centered cubic structure, the edge, a, could be obtained using pythagoras theorem knowing the hypotenuse of the unit cell, b, is equal to 4r:
a² + a² = b² = (4r)²
2a² = 16r²
a = √8 r
That means edge lenght is = √8 r
adius
As radius of Silver is 144pm = 144x10⁻¹²m:
a = √8 r
a = √8 ₓ 144x10⁻¹²m
a = 4.07x10⁻¹⁰m
Edge length of the unit cell is 4.07x10⁻¹⁰mList the following compounds in order from strongest acid to weakest acid. Rank the acids from strongest to weakest.
CH2CHCH2COOH CH2CH2CH2COOH CH3CHCH2COOH CH3CH2CH2COOH
Strongest Weakest
Answer:
CH3CH2CH2COOH<CH2(F)CH2CH2COOH<CH3CH(F)CH2COOH<CH2(F)CH(F)CH2COOH
Explanation:
We know that the presence of highly electronegative elements in carboxylic acid molecules lead to -I inductive effect. This implies that electrons are withdrawn along the chain towards the electronegative element. As electrons are withdrawn towards the electronegative element, the electron cloud of the carbonyl- hydrogen bond in the acid weakens and the hydrogen can now be easily lost as a proton, that is , the molecule becomes more acidic.
The -I inductive effect increases with increase in the number of electronegative elements present in the molecule and the proximity of the electronegative element to the carbonyl group. The closer the electronegative element is to the carbonyl group, the greater the acidity of the molecule since the -I inductive effect dies out with increasing distance from the carbonyl group. Also, the more the number of electronegative elements in the molecule, the greater the - I inductive effect and the greater the acidity of the molecule, hence the answer.
Erbium metal (Er) can be prepared by reacting erbium(III) fluoride with magnesium; the other product is magnesium fluoride. Write and balance the equation.
Answer:
2ErF3 + 3Mg → 2Er + 3MgF2
Explanation:
Erbium metal is a member of the lanthaniod series. It reacts with halogens directly to yield erbium III halides such as erbium III chloride, Erbium III fluoride etc.
Erbium metal (Er) can be prepared by reacting erbium(III) fluoride with magnesium; the products are erbium metal and magnesium fluoride. This is a normal redox process in which the Erbium metal is reduced while the magnesium is oxidized. The balanced reaction equation of this process is; 2ErF3 + 3Mg → 2Er + 3MgF2
Which of the following is NOT one of the types of bonds? A. Ionic B. Metallic C. Covalent D. Valence
Considering the definition of bond and the different type of bonds, valence is not one of the types of bonds.
What is a chemical bondA chemical bond is defined as the force by which the atoms of a compound are held together. These are electromagnetic forces that give rise to different types of chemical bonds.
In other words, a chemical bond is the force that joins atoms to form chemical compounds and confers stability to the resulting compound.
Covalent bondThe covalent bond is the chemical bond between atoms where electrons are shared, forming a molecule. Covalent bonds are established between non-metallic elements, such as hydrogen H, oxygen O and chlorine Cl. These elements have many electrons in their outermost level (valence electrons) and have a tendency to gain electrons to acquire the stability of the electronic structure of noble gas. The shared electron pair is common to the two atoms and holds them together.
Ionic bondAn ionic bond is produced between metallic and non-metallic atoms, where electrons are completely transferred from one atom to another. During this process, one atom loses electrons and another one gains them, forming ions.
Metallic bondMetallic bonds are a type of chemical bond that occurs only between atoms of the same metallic element. In this way, metals achieve extremely compact, solid and resistant molecular structures, since the atoms that share their valence electrons.
SummaryIn summary, valence is not one of the types of bonds. The types of bonds are covalent, ionic and metallic.
Learn more about chemical bonds:
https://brainly.com/question/25385832
https://brainly.com/question/13178368
#SPJ1
When 75.5 grams of phosphorus pentachloride react with an excess of water, as shown in the unbalanced chemical equation below, how many moles of hydrochloric acid will be produced? Please show all your work for the calculations for full credit. PCl5 + H2O --> H3PO4 + HC
Answer:
Explanation: M(PCL5)= 31 + 5(35.5)
=208.5g/mol
M(H20)= 18g/mol
n(PCL5) = 75.5÷208.5
= 0.362mol
n(HCl)/n(PCL5)= 5/1
n(HCl)= 5×0.362
=1.81mol of HCl
What volume of CH4(g), measured at 25oC and 745 Torr, must be burned in excess oxygen to release 1.00 x 106 kJ of heat to the surroundings
Answer:
[tex]V=27992L=28.00m^3[/tex]
Explanation:
Hello,
In this case, the combustion of methane is shown below:
[tex]CH_4+2O_2\rightarrow CO_2+2H_2O[/tex]
And has a heat of combustion of −890.8 kJ/mol, for which the burnt moles are:
[tex]n_{CH_4}=\frac{-1.00x10^6kJ}{-890.8kJ/mol}= 1122.6molCH_4[/tex]
Whereas is consider the total released heat to the surroundings (negative as it is exiting heat) and the aforementioned heat of combustion. Then, by using the ideal gas equation, we are able to compute the volume at 25 °C (298K) and 745 torr (0.98 atm) that must be measured:
[tex]PV=nRT\\\\V=\frac{nRT}{P}=\frac{1122.6mol*0.082\frac{atm*L}{mol*K}*298K}{0.98atm}\\\\V=27992L=28.00m^3[/tex]
Best regards.
A 0.4647-g sample of a compound known to contain only carbon, hydrogen, and oxygen was burned in oxygen to yield 0.01962 mol of CO2 and 0.01961 mol of H2O. The empirical formula of the compound was found to be C3H6O2. Show how this was calculated.
What does the empirical formula tell you about the compound?
The molar mass of the actual compound was found to be 222.27g/mol. Find the molecular formula of this compound. What does the molecular formula tell you about the compound?
Can you see what type of functional group this compound could have?
Answer:
See explanation.
Explanation:
Hello,
In this case, we can show how the empirical formula is found by following the shown below procedure:
1. Compute the moles of carbon in carbon dioxide as the only source of carbon at the products:
[tex]n_C=0.01962molCO_2*\frac{1molC}{1molCO_2} =0.01962molC[/tex]
2. Compute the moles of hydrogen in water as the only source of hydrogen at the products:
[tex]n_H=0.01961molH_2O*\frac{2molH}{1molH_2O}=0.03922molH[/tex]
3. Compute the mass of oxygen by subtracting the mass of both carbon and hydrogen from the 0.4647-g sample:
[tex]m_O=0.4647g-0.01962molC*\frac{12gC}{1molC}-0.03922molH*\frac{1gH}{1molH} =0.1900gO[/tex]
4. Compute the moles of oxygen by using its molar mass:
[tex]n_O=0.1900gO*\frac{1molO}{16gO}=0.01188molO[/tex]
5. Divide the moles of carbon, hydrogen and oxygen by the moles of oxygen (smallest one) to find the subscripts in the empirical formula:
[tex]C=\frac{0.01962}{0.01188}=1.65\\ \\H=\frac{0.03922}{0.01188} =3.3\\\\O=\frac{0.01188}{0.01188} =1[/tex]
6. Search for the closest whole number (in this case multiply by 2):
[tex]C_3H_6O_2[/tex]
Moreover, the empirical formula suggests this compound could be carboxylic acid since it has two oxygen atoms, nevertheless, this is not true since the molar mass is 222.27 g/mol, therefore, we should compute the molar mass of the empirical formula, that is:
[tex]M=12*3+1*6+16*2=74g/mol[/tex]
Which is about three times in the molecular formula, for that reason, the actual formula is:
[tex]C_9H_{18}O_6[/tex]
It suggest that the compound has a highly oxidizing character due to the presence of oxygen, therefore, we cannot predict the distribution of the functional groups as it could contain, carboxyl, carbonyl, hydroxyl or even peroxi.
Best regards.
The average bond length in C-C in benzene (C6H6) is between single and double bond lengths. This is due to which of the following effect?
1. Due to its refractive index2. Due to the possession of resonance3. Due to its H atoms4. Due to the H-bonds
Answer:
2. Due to the possession of resonance
Explanation:
In the benzene ring, the electrons that results in the bonds between the carbon atoms are delocalized. That is, they do not belong to a specific carbon atom. It is this unique feature that enables them to have a bond length between single and double bond lengths.
This feature is as a result of resonance.
The correct option is 2.