Answer:
-18896.49 V/m
Explanation:
Distance between the two plates = 10 cm = 10 x [tex]10^{-2}[/tex] m = 0.1 m
Also, one of the plates is taken as zero volt.
a. The potential strength between the zero volt plate, and 7.05 cm (0.0705 m) away is 393 V
b. The potential strength between the other plate, and 2.95 cm (0.0295 m) away is 393 V
Potential field strength = -dV/dx
where dV is voltage difference between these points,
dx is the difference in distance between these points
For the first case above,
potential field strength = -393/0.0705 = -5574.46 V/m
For the second case ,
potential field strength = -393/0.0295 = -13322.03 V/m
Magnitude of the field strength across the plates will be
-5574.46 + (-13322.03) = -5574.46 + 13322.03 = -18896.49 V/m
In cricket how bowler and batsman use acceleration?
An electron moving in a direction perpendicular to a uniform magnetic field at a speed of 1.6 107 m/s undergoes an acceleration of 7.0 1016 m/s2 to the right (the positive x-direction) when its velocity is upward (the positive y-direction). Determine the magnitude and direction of the field.
Answer:
B = 0.024T positive z-direction
Explanation:
In this case you consider that the direction of the motion of the electron, and the direction of the magnetic field are perpendicular.
The magnitude of the magnetic force exerted on the electron is given by the following formula:
[tex]F=qvB[/tex] (1)
q: charge of the electron = 1.6*10^-19 C
v: speed of the electron = 1.6*10^7 m/s
B: magnitude of the magnetic field = ?
By the Newton second law you also have that the magnetic force is equal to:
[tex]F=qvB=ma[/tex] (2)
m: mass of the electron = 9.1*10^-31 kg
a: acceleration of the electron = 7.0*10^16 m/s^2
You solve for B from the equation (2):
[tex]B=\frac{ma}{qv}\\\\B=\frac{(9.1*10^{-31}kg)(7.0*10^{16}m/s^2)}{(1.6*10^{-19}C)(1.6*10^7m/s)}\\\\B=0.024T[/tex]
The direction of the magnetic field is found by using the right hand rule.
The electron moves upward (+^j). To obtain a magnetic forces points to the positive x-direction (+^i), the direction of the magnetic field has to be to the positive z-direction (^k). In fact, you have:
-^j X ^i = ^k
Where the minus sign of the ^j is because of the negative charge of the electron.
Then, the magnitude of the magnetic field is 0.024T and its direction is in the positive z-direction
An object with a mass m slides down a rough 37° inclined plane where the coefficient of kinetic friction is 0.20. If the plane is 10 m long and the mass starts from rest, what will be its speed at the bottom of the plane?
Answer: 9.312 m/s
Explanation:
The friction force (opposite to the motion) is Fa = μ*m*g*cos(α) with μ = kinetic friction. The force that makes the motion is
F = m*g*sin(α).
The Newton's law gives:
F - Fa = m*a
m*g*sin(α) - μ*m*g*cos(α) = m*a
g*sin(α) - μ*g*cos(α) = a so a = 4.335 m/s²
It's a uniformly accelerated motion:
Space
S = 0.5*a*t²
10 = 0.5*a*t²
=> t = 2.148 s
Velocity
V = a*t = 9.312 m/s.
We have that the speed at the bottom of the plane is
[tex]v-9.3m/s[/tex]
From the question we are told that:
Angle of slide [tex]\theta =3.7 \textdegree[/tex]
Coefficient of kinetic friction [tex]\mu= 0.20[/tex]
Length [tex]L=10m[/tex]
Generally, the equation for acceleration along the slide is mathematically given by
[tex]a=gsin \theta-\mu cos\theta[/tex]
[tex]a=(9.8sin37-0.20*9.8*cos37[/tex]
[tex]a=4.33m/s^2[/tex]
Therefore
Velocity v is is mathematically given by
[tex]v=\sqrt{2as}[/tex]
[tex]v=\sqrt{2*4.33*10}[/tex]
[tex]v-9.3m/s[/tex]
In conclusion
The speed at the bottom of the plane is
[tex]v-9.3m/s[/tex]
For more information on this visit
https://brainly.com/question/16948127
An airplane is flying on a bearing of N 400 W at 500 mph. A strong jet-stream speed wind of 100 mph is blowing at S 500 W.
Required:
a. Find the vector representation of the plane and of the wind.
b. Find the resultant vector that represents the actual course of the plane.
c. Give the resulting speed and bearing of the plane.
Answer:
A. a (-321.393, 383.022) b (-76.40, -64.278)
B. (-397.991, 318.744)
C. a. resulting speed 509.9mph b. bearing of the plane = 51.6°
Explanation:
A total charge of 62 nC is uniformly distributed throughout a non-conducting sphere with a radius of 5.00 cm. The electric potential at r = 15.0 cm , relative to the potential far away, is:________
Answer:
2790 J/C
Explanation:
charge on sphere Q = 62 nC = [tex]62*10^{-9} C[/tex]
radius of the sphere r = 5.0 cm = 0.05 m
distance away from reference point d = 15.0 cm = 0.15 m
total distance of charge relative reference point R = r + d = 0.05 + 0.15 = 0.2 m
electric potential V is given as
[tex]V = \frac{kQ}{R}[/tex]
where k = Coulumb's constant = [tex]9*10^{9}[/tex] kg⋅m³⋅s⁻⁴⋅A⁻²
[tex]V = \frac{9*10^{9} * 62*10^{-9} }{0.2}[/tex] = [tex]\frac{9*62}{0.2}[/tex]
V = 2790 J/C
Question 9(Multiple Choice Worth 4 points) (05.03 LC) What most likely happens when water vapor cools? It changes into gas. It changes into liquid. Its temperature increases. Its temperature remains constant.
Answer:
it changes into liquid
Answer:
It changes in to liquids
Explanation:
This is because the water vapor cools down and condenses it attaches it self to dust forming water droplets. Those water droplets are water.
In a double-slit interference experiment you are asked to use laser light of different wavelengths and determine the separation between adjacent maxima. You observe that this separation is greatest when you illuminate the double slit with In a double-slit interference experiment you are asked to use laser light of different wavelengths and determine the separation between adjacent maxima. You observe that this separation is greatest when you illuminate the double slit with:
1. yellow light.
2. red light.
3. blue light.
4. green light.
5. The separation is the same for all wavelengths.
Answer:
we see that the lights with the most extreme wavelength are blue and red
we see that the separation between the interference lines (y) increases linearly with the wavelength for which the phenomenon is best observed in the RED response 2
Explanation:
In Young's double-slit experiment, constructive interference is written by the equation
d sin θ = m λ
where you give the gap separation, lam the length of the donda used and m the order of interference
in many he uses trigonometry to express the synth in confusing the distances on a very distant screen
so θ = y / L
in this experiment the angles are generally very small, so
tan θ = sin θ / cos θ = sin θ
sint θ = y / L
let's replace
d y / L = mλ
y = (m L / d) λ
now let's examine the effect of changing the wavelength
1 yellow lam = 600 10⁻⁹ m
2) red lam = 750 10⁻⁹m
3) blue lam = 450 10⁻⁸ nm
4) green lam = 550 10⁻⁹ nm
we see that the lights with the most extreme wavelength are blue and red
we see that the separation between the interference lines (y) increases linearly with the wavelength for which the phenomenon is best observed in the RED response 2
Select the correct answer. When waves travel through water, why do the moving water particles continue to return to their starting position? A. Waves transfer matter, but not energy. B. Waves transfer both matter and energy. C. Waves transfer energy, but not matter. D. Waves don’t transfer matter or energy.
Waves transfer energy, but not matter. (C)
Answer:
C. Waves transfer energy not matter
Explanation:
wave is a disturbance
Which circuits are parallel circuits?
Answer:
The bottom two lines.
Explanation:
They need their own line of voltage quantity. A parallel circuit has the definition of 'two or more paths for current to flow through.' The voltage does stay the same in each line.
g A mass of 2 kg is attached to a spring whose constant is 7 N/m. The mass is initially released from a point 4 m above the equilibrium position with a downward velocity of 10 m/s, and the subsequent motion takes place in a medium that imparts a damping force numerically equal to 10 times the instantaneous velocity. What is the differential equation for the mass-spring system.
Answer:
mass 20 times of an amazing and all its motion
A high-jumper clears the bar and has a downward velocity of - 5.00 m/s just before landing on an air mattress and bouncing up at 1.0 m/s. The mass of the high-jumper is 60.0 kg. What is the magnitude and direction of the impulse that the air mattress exerts on her
-- As she lands on the air mattress, her momentum is (m v)
Momentum = (60 kg) (5 m/s down) = 300 kg-m/s down
-- As she leaves it after the bounce,
Momentum = (60 kg) (1 m/s up) = 60 kg-m/s up
-- The impulse (change in momentum) is
Change = (60 kg-m/s up) - (300 kg-m/s down)
Magnitude of the change = 360 km-m/s
The direction of the change is up /\ .
The direction of a body or object's movement is defined by its velocity.In its basic form, speed is a scalar quantity.In essence, velocity is a vector quantity.It is the speed at which distance changes.It is the displacement change rate.
Solve the problem ?
Velocity is the pace and direction of an object's movement, whereas speed is the time rate at which an object is travelling along a path.In other words, velocity is a vector, whereas speed is a scalar value. We discuss the conceptive impulse in this puzzle.A high jumper weighing 60.0 kg sprints on the matrix at minus 6 meters per second in the downhill direction before falling to the mattress.her admirer.Speed drops to 0 meters/second.We must determine the impulse's size and presumed direction, which is upward and positive.The change in momentum is then equal to the impulse.The impulse therefore equals m times.the end velocity less the starting velocity.60.0kg times 0 minus minus 6 meters per second is the impulse, therefore.The impulse is 360 kilogram meters per second, or 360 newtons, to put it another way.The second is upward, and the direction.To learn more about magnitude refer
https://brainly.com/question/24468862
#SPJ2
The index of refraction for a certain type of glass is 1.645 for blue light and 1.609 for red light. A beam of white light (one that contains all colors) enters a plate of glass from the air, nair≈1, at an incidence angle of 38.55∘. What is the absolute value of ????, the angle in the glass between blue and red parts of the refracted beams?
Answer:
blue θ₂ = 22.26º
red θ₂ = 22.79º
Explanation:
When a light beam passes from one material medium to another, it undergoes a deviation from the path, described by the law of refraction
n₁ sin θ₁ = n₂ sin θ₂
where n₁ and n₂ are the incident and transmitted media refractive indices and θ are the angles in the media
let's apply this equation to each wavelength
λ = blue
in this case n₁ = 1, n₂ = 1,645
sin θ₂ = n₁/ n₂ sin₂ θ₁
let's calculate
sin θ₂ = 1 / 1,645 sint 38.55
sin θ₂ = 0.37884
θ₂ = sin⁻¹ 0.37884
θ₂ = 22.26º
λ = red
n₂ = 1,609
sin θ₂ = 1 / 1,609 sin 38.55
sin θ₂ = 0.3873
θ₂ = sim⁻¹ 0.3873
θ₂ = 22.79º
the refracted rays are between these two angles
Suppose that when you move the north pole of a bar magnetic toward a coil it induces a positive current in the coil. The strength of the field produced by an electromagnetic can be controlled electronically. Suppose you place a coil near the north pole of an electromagnet and increase the field while keeping everything stationary. Which one of the following will happen? a) A positive current will be induced in the coilb) A negative current will be induced in the coil c) No current will be induced in the coil since there is no relative motion.
Answer:
a) A positive current will be induced in the coil
Explanation:
Electromagnetic induction is the induction of an electric field on a conductor due to a changing magnetic field flux. The change in the flux can be by moving the magnet relative to the conductor, or by changing the intensity of the magnetic field of the magnet. In the case of this electromagnets, the gradual increase in the the electromagnet's field strength will cause a flux change, which will in turn induce an electric current on the coil.
According to Lenz law, the induced current acts in such a way as to negate the motion or action that is producing it. A positive current will be induced on the coil so as to repel any form of attraction between the north pole of the electromagnet and the coil. This law obeys the law of conservation of energy, since work has to be done to move the move them closer to themselves.
Explain how a refrigerator works to cool down warm objects that would otherwise be room temperature
Answer: evaporation
Explanation:
Refrigerators work by causing the refrigerant circulating inside them to change from a liquid into a gas. This process, called evaporation, cools the surrounding area and produces the desired effect.
A force in the negative x-direction is applied for 27 ms to a 0.4 kg mass initially moving at 14 m/s in the x-direction. The force varies in magnitude and delivers an impulse with a magnitude of 32.4 N-s. What is the mass's velocity in the x-direction
Answer:
-67 m/s
Explanation:
We are given that
Mass of ball,m=0.4 kg
Initial speed,u=14 m/s
Impulse,I=-32.4 N-s
Time,t=27 ms=[tex]27\times 10^{-3} s[/tex]
We have to find the mass's velocity in the x- direction.
We know that
[tex]Impulse=mv-mu[/tex]
Substitute the values
[tex]-32.4=0.4v-0.4(14)[/tex]
[tex]-32.4+0.4(14)=0.4 v[/tex]
[tex]-26.8=0.4v[/tex]
[tex]v=\frac{-26.8}{0.4}=-67m/s[/tex]
charged particles from the solar winds ultimately cause ___. a. the earth to maintain it's magnetic field b. the earth to change shape c. the auroras d. strong winds on earth
Answer:
The auroras C.
Explanation:
Three blocks are placed in contact on a horizontal frictionless surface. A constant force of magnitude F is applied to the box of mass M. There is friction between the surfaces of blocks 2M and 3M so the three blocks accelerate together to the right.
Which block has the smallest net force acting on it?
A) M
B) 2M
C) 3M
D) The net force is the same for all three blocks Submit
Answer:
A) M
Explanation:
The three blocks are set in series on a horizontal frictionless surface, whose mutual contact accelerates all system to the same value due to internal forces as response to external force exerted on the box of mass M (Newton's Third Law). Let be F the external force, and F' and F'' the internal forces between boxes of masses M and 2M, as well as between boxes of masses 2M and 3M. The equations of equilibrium of each box are described below:
Box with mass M
[tex]\Sigma F = F - F' = M\cdot a[/tex]
Box with mass 2M
[tex]\Sigma F = F' - F'' = 2\cdot M \cdot a[/tex]
Box with mass 3M
[tex]\Sigma F = F'' = 3\cdot M \cdot a[/tex]
On the third equation, acceleration can be modelled in terms of F'':
[tex]a = \frac{F''}{3\cdot M}[/tex]
An expression for F' can be deducted from the second equation by replacing F'' and clearing the respective variable.
[tex]F' = 2\cdot M \cdot a + F''[/tex]
[tex]F' = 2\cdot M \cdot \left(\frac{F''}{3\cdot M} \right) + F''[/tex]
[tex]F' = \frac{5}{3}\cdot F''[/tex]
Finally, F'' can be calculated in terms of the external force by replacing F' on the first equation:
[tex]F - \frac{5}{3}\cdot F'' = M \cdot \left(\frac{F''}{3\cdot M} \right)[/tex]
[tex]F = \frac{5}{3} \cdot F'' + \frac{1}{3}\cdot F''[/tex]
[tex]F = 2\cdot F''[/tex]
[tex]F'' = \frac{1}{2}\cdot F[/tex]
Afterwards, F' as function of the external force can be obtained by direct substitution:
[tex]F' = \frac{5}{6}\cdot F[/tex]
The net forces of each block are now calculated:
Box with mass M
[tex]M\cdot a = F - \frac{5}{6}\cdot F[/tex]
[tex]M\cdot a = \frac{1}{6}\cdot F[/tex]
Box with mass 2M
[tex]2\cdot M\cdot a = \frac{5}{6}\cdot F - \frac{1}{2}\cdot F[/tex]
[tex]2\cdot M \cdot a = \frac{1}{3}\cdot F[/tex]
Box with mass 3M
[tex]3\cdot M \cdot a = \frac{1}{2}\cdot F[/tex]
As a conclusion, the box with mass M experiments the smallest net force acting on it, which corresponds with answer A.
How much electrical energy is used by a 75 W laptop that is operating for 12
minutes?
"1 watt" means 1 joule of energy per second.
75 W means 75 joules/sec .
Energy = (75 Joule/sec) x (12 min) x (60 sec/min)
Energy = (75 x 12 x 60) (Joule-min-sec / sec-min)
Energy = 54,000 Joules
The exit nozzle in a jet engine receives air at 1200 K, 150 kPa with negligible kinetic energy. The exit pressure is 80 kPa, and the process is reversible and adiabatic. Use constant specific heat at 300 K to find the
Complete question:
The exit nozzle in a jet engine receives air at 1200 K, 150 kPa with negligible kinetic energy. The exit pressure is 80 kPa, and the process is reversible and adiabatic. Use constant specific heat at 300 K to find the exit velocity.
Answer:
The exit velocity is 629.41 m/s
Explanation:
Given;
initial temperature, T₁ = 1200K
initial pressure, P₁ = 150 kPa
final pressure, P₂ = 80 kPa
specific heat at 300 K, Cp = 1004 J/kgK
k = 1.4
Calculate final temperature;
[tex]T_2 = T_1(\frac{P_2}{P_1})^{\frac{k-1 }{k}[/tex]
k = 1.4
[tex]T_2 = T_1(\frac{P_2}{P_1})^{\frac{k-1 }{k}}\\\\T_2 = 1200(\frac{80}{150})^{\frac{1.4-1 }{1.4}}\\\\T_2 = 1002.714K[/tex]
Work done is given as;
[tex]W = \frac{1}{2} *m*(v_i^2 - v_e^2)[/tex]
inlet velocity is negligible;
[tex]v_e = \sqrt{\frac{2W}{m} } = \sqrt{2*C_p(T_1-T_2)} \\\\v_e = \sqrt{2*1004(1200-1002.714)}\\\\v_e = \sqrt{396150.288} \\\\v_e = 629.41 \ m/s[/tex]
Therefore, the exit velocity is 629.41 m/s
The energy band gap of GaAs is 1.4ev. calculate the optimum wavelength of the light for photovoltaic generation in a GaAs solar cell
Answer:
The wavelength is [tex]\lambda = 886 \ nm[/tex]
Explanation:
From the question we are told that
The energy band gap is [tex]E = 1.4 eV[/tex]
Generally the energy of a single photon of light emitted for an electron jump in a GaAS solar cell is mathematically represented as
[tex]E = \frac{hc}{\lambda }[/tex]
Where h is the Planck's constant with values
[tex]h = 4.1357 * 10^{-15} eV[/tex]
and c is the speed of light with values [tex]c = 3*10^{8} \ m/s[/tex]
So
[tex]\lambda = \frac{hc}{E}[/tex]
substituting values
[tex]\lambda = \frac{4.1357 *10^{-15} * 3.0 *10^{8}}{1.4}[/tex]
[tex]\lambda = 886 \ nm[/tex]
A hockey puck on a frozen pond is given an initial speed of 20.0 m/s. If the puck always remains on the ice and slides 115 m before coming to rest, determine the coefficient of kinetic friction between the puck and ice.
Answer:
μ_k = 0.1773
Explanation:
We are given;
Initial velocity;u = 20 m/s
Final velocity;v = 0 m/s (since it comes to rest)
Distance before coming to rest;s = 115 m
Let's find the acceleration using Newton's second law of motion;
v² = u² + 2as
Making a the subject, we have;
a = (v² - u²)/2s
Plugging relevant values;
a = (0² - 20²)/(2 × 115)
a = -400/230
a = -1.739 m/s²
From the question, the only force acting on the puck in the x direction is the force of friction. Since friction always opposes motion, we see that:
F_k = −ma - - - (1)
We also know that F_k is defined by;
F_k = μ_k•N
Where;
μ_k is coefficient of kinetic friction
N is normal force which is (mg)
Since gravity acts in the negative direction, the normal force will be positive.
Thus;
F_k = μ_k•mg - - - (2)
where g is acceleration due to gravity.
Thus,equating equation 1 and 2,we have;
−ma = μ_k•mg
m will cancel out to give;
-a = μ_k•g
μ_k = -a/g
g has a constant value of 9.81 m/s², so;
μ_k = - (-1.739/9.81)
μ_k = 0.1773
The coefficient of kinetic friction between the hockey puck and ice is equal to 0.178
Given the following data:
Initial speed = 20 m/sFinal velocity = 0 m/s (since it came to rest)Distance = 115 mScientific data:
Acceleration due to gravity = 9.8 [tex]m/s^2[/tex]To determine the coefficient of kinetic friction between the hockey puck and ice:
First of all, we would calculate the acceleration of the hockey puck by using the third equation of motion.
[tex]V^2 = U^2 + 2aS\\\\0^2 =20^2 + 2a(115)\\\\-400=230a\\\\a=\frac{-400}{230}[/tex]
Acceleration, a = -1.74 [tex]m/s^2[/tex]
Note: The negative signs indicates that the hockey puck is slowing down or decelerating.
From Newton's Second Law of Motion, we have:
[tex]\sum F_x = F_k + F_n =0\\\\F_k =- F_n\\\\\mu mg =-ma\\\\\mu = \frac{-a}{g}\\\\\mu = \frac{-(-1.74)}{9.8}\\\\\mu = \frac{1.74}{9.8}[/tex]
Coefficient of kinetic friction = 0.178
Read more: https://brainly.com/question/13821217
A hockey puck slides off the edge of a horizontal platform with an initial velocity of 28.0 m/shorizontally in a city where the acceleration due to gravity is 9.81 m/s 2. The puck experiences no significant air resistance as it falls. The height of the platform above the ground is 2.00 m. What is the angle below the horizontal of the velocity of the puck just before it hits the ground
Answer:
θ = 12.60°
Explanation:
In order to calculate the angle below the horizontal for the velocity of the hockey puck, you need to calculate both x and y component of the velocity of the puck, and also you need to use the following formula:
[tex]\theta=tan^{-1}(\frac{v_y}{v_x})[/tex] (1)
θ: angle below he horizontal
vy: y component of the velocity just after the puck hits the ground
vx: x component of the velocity
The x component of the velocity is constant in the complete trajectory and is calculated by using the following formula:
[tex]v_x=v_o[/tex]
vo: initial velocity = 28.0 m/s
The y component is calculated with the following equation:
[tex]v_y^2=v_{oy}^2+2gy[/tex] (2)
voy: vertical component of the initial velocity = 0m/s
g: gravitational acceleration = 9.8 m/s^2
y: height
You solve the equation (2) for vy and replace the values of the parameters:
[tex]v_y=\sqrt{2gy}=\sqrt{2(9.8m/s^2)(2.00m)}=6.26\frac{m}{s}[/tex]
Finally, you use the equation (1) to find the angle:
[tex]\theta=tan^{-1}(\frac{6.26m/s}{28.0m/s})=12.60\°[/tex]
The angle below the horizontal is 12.60°
The angle below the horizontal of the velocity of the puck just before it hits the ground is 12.60°.
Given the following data:
Initial velocity = 28.0 m/s Acceleration due to gravity = 9.81 [tex]m/s^2[/tex]Displacement (height) = 2.00 meters.To find the angle below the horizontal of the velocity of the puck just before it hits the ground:
First of all, we would determine the horizontal and vertical components of the hockey puck.
For horizontal component:
[tex]V_y^2 = U_y^2 + 2aS\\\\V_y^2 = 0^2 + 2(9.81)(2)\\\\V_y^2 = 39.24\\\\V_y = \sqrt{39.24} \\\\V_y = 6.26 \; m/s[/tex]
For vertical component:
[tex]V_x = U_x\\\\V_x = 28.0 \;m/s[/tex]
Now, we can find the angle by using the formula:
[tex]\Theta = tan^{-1} (\frac{V_y}{V_x} )[/tex]
Substituting the values, we have:
[tex]\Theta = tan^{-1} (\frac{6.26}{28.0} )\\\\\Theta = tan^{-1} (0.2236)\\\\\Theta = 12.60[/tex]
Angle = 12.60 degrees.
Read more: https://brainly.com/question/8898885
A 2.4-kg ball falling vertically hits the floor with a speed of 2.5 m/s and rebounds with a speed of 1.5 m/s. What is the magnitude of the impulse exerted on the ball by the floor
Answer:
9.6 Ns
Explanation:
Note: From newton's second law of motion,
Impulse = change in momentum
I = m(v-u).................. Equation 1
Where I = impulse, m = mass of the ball, v = final velocity, u = initial velocity.
Given: m = 2.4 kg, v = 2.5 m/s, u = -1.5 m/s (rebounds)
Substitute into equation 1
I = 2.4[2.5-(-1.5)]
I = 2.4(2.5+1.5)
I = 2.4(4)
I = 9.6 Ns
The magnitude of impulse will be "9.6 Ns".
According to the question,
Mass,
m = 2.4 kgFinal velocity,
v = 2.5 m/sInitial velocity,
u = -1.5 m/sBy using Newton's 2nd law of motion, we get
→ Impulse, [tex]I = m(v-u)[/tex]
By substituting the values, we get
[tex]= 2.4[2.5-(1.5)][/tex]
[tex]= 2.4(2.5+1.5)[/tex]
[tex]= 2.4\times 4[/tex]
[tex]= 9.6 \ Ns[/tex]
Thus the above answer is right.
Learn more about Impulse here:
https://brainly.com/question/15495020
A 73 kg swimmer dives horizontally off a 462 kg raft initially at rest. If the diver's speed immediately after leaving the raft is 5.54 m/s, what is the corresponding raft speed
Answer:
Corresponding raft speed = -0.875 m/s (the minus sign indicates that the raft moves in the direction opposite to the diver)
Explanation:
Law of conservation of momentum gives that the momentum of the diver and the raft before the dive is equal to the momentum of the diver and the raft after the dive.
And since the raft and the diver are initially at rest, the momentum of the diver after the dive is equal and opposite to the momentum experienced by the raft after the dive.
(Final momentum of the diver) + (Final momentum of the raft) = 0
Final Momentum of the diver = (mass of the diver) × (diving velocity of the diver)
Mass of the diver = 73 kg
Diving velocity of the diver = 5.54 m/s
Momentum of the diver = 73 × 5.54 = 404.42 kgm/s
Momentum of the raft = (mass of the raft) × (velocity of the raft)
Mass of the raft = 462 kg
Velocity of the raft = v
Momentum of the raft = 462 × v = (462v) kgm/s
404.42 + 462v = 0
462v = -404.42
v = (-404.42/462) = -0.875 m/s (the minus sign indicates that the raft moves in the direction opposite to the diver)
Hope this Helps!!!
How many diffraction maxima are contained in a region of the Fraunhofer single-slit pattern, subtending an angle of 2.12°, for a slit width of 0.110 mm, using light of wavelength 582 nm?
Answer:
6
Explanation:
We are given that
[tex]\theta=2.12^{\circ}[/tex]
Slid width,a=0.110 mm=[tex]0.11\times 10^{-3} m[/tex]
[tex]1mm=10^{-3} m[/tex]
Wavelength,[tex]\lambda=582 nm=582\times 10^{-9}[/tex] m
[tex]1nm=10^{-9} m[/tex]
We have to find the number of diffraction maxima are contained in a region of the Fraunhofer single-slit pattern.
[tex]asin\theta=\frac{2N+1}{2}\lambda[/tex]
Using the formula
[tex]0.11\times 10^{-3}sin(2.12)=\frac{2N+1}{2}(582\times 10^{-9})[/tex]
[tex]2N+1=\frac{0.11\times 10^{-3}sin(2.12)\times 2}{582\times 10^{-9}}[/tex]
[tex]2N+1=13.98[/tex]
[tex]2N=13.98-1=12.98[/tex]
[tex]N=\frac{12.98}{2}\approx 6[/tex]
Hence, 6 diffraction maxima are contained in a region of the Fraunhofer single-slit pattern
A place-kicker must kick a football from a point 36.0 m (about 40 yards) from the goal. Half the crowd hopes the ball will clear the crossbar, which is 3.05 m high. When kicked, the ball leaves the ground with a speed of 21.6 m/s at an angle of 50.0° to the horizontal.
Required:
By how much does the ball clear or fall short (vertically) of clearing the crossbar?
Answer:
The difference is height is [tex]\Delta h =6.92 \ m[/tex]
Explanation:
From the question we are told that
The distance of ball from the goal is [tex]d = 36.0 \ m[/tex]
The height of the crossbar is [tex]h = 3.05 \ m[/tex]
The speed of the ball is [tex]v = 21.6 \ m/s[/tex]
The angle at which the ball was kicked is [tex]\theta = 50 ^o[/tex]
The height attained by the ball is mathematically represented as
[tex]H = v_v * t - \frac{1}{2} gt^2[/tex]
Where [tex]v_v[/tex] is the vertical component of velocity which is mathematically represented as
[tex]v_v = v * sin (\theta )[/tex]
substituting values
[tex]v_v = 21.6 * (sin (50 ))[/tex]
[tex]v_v = 16.55 \ m/s[/tex]
Now the time taken is evaluated as
[tex]t = \frac{d}{v * cos(\theta )}[/tex]
substituting value
[tex]t = \frac{36}{21.6 * cos(50 )}[/tex]
[tex]t = 2.593 \ s[/tex]
So
[tex]H = 16.55 * 2.593 - \frac{1}{2} * 9.8 * (2.593)^3[/tex]
[tex]H = 9.97 \ m[/tex]
The difference in height is mathematically evaluated as
[tex]\Delta h = H - h[/tex]
substituting value
[tex]\Delta h = 9.97 - 3.05[/tex]
[tex]\Delta h =6.92 \ m[/tex]
A horizontal 790-N merry-go-round of radius 1.60 m is started from rest by a constant horizontal force of 45 N applied tangentially to the merry-go-round. Find the kinetic energy of the merry-go-round after 4.0 s. (Assume it is a solid cylinder. Also assume the force is applied at the outside edge.)
Answer:
404.3 J
Explanation:
Given that
Weight of the merry go round = 790 N
Radius if the merry go round = 1.6 m
Horizontal force applied = 45 N
Time taken = 4 s
To find the mass of the merry go round, we divide the weight by acceleration due to gravity. Thus,
m = F/g
m = 790 / 9.8
m = 80.6 kg
We know that the moment of inertia is given as
I = ½mr², on substitution, we have
I = ½ * 80.6 * 1.6²
I = 103.17 kgm²
Torque = Force applied * radius, so
τ = 45 * 1.6
τ = 72 Nm
To get the angular acceleration, we have,
α = τ / I
α = 72 / 103.17
α = 0.70 rad/s²
Then, the angular velocity is
ω = α * t
ω = 0.7 * 4
ω = 2.8 rad/s
Finally, to get the Kinetic Energy, we have
K.E = ½ * Iω², on substituting, we get
K.E = ½ * 103.17 * 2.8²
K.E = 404.3 J
Therefore, the kinetic energy is 404.3 J
An electron moves at a speed of 1.0 x 104 m/s in a circular path of radius 2 cm inside a solenoid. The magnetic field of the solenoid is perpendicular to the plane of the electron’s path. Calculate (a) the strength of the magnetic field inside the solenoid and (b) the current in the solenoid if it has 25 turns per centimeter.
Answer:
(a) B = 2.85 × [tex]10^{-6}[/tex] Tesla
(b) I = I = 0.285 A
Explanation:
a. The strength of magnetic field, B, in a solenoid is determined by;
r = [tex]\frac{mv}{qB}[/tex]
⇒ B = [tex]\frac{mv}{qr}[/tex]
Where: r is the radius, m is the mass of the electron, v is its velocity, q is the charge on the electron and B is the magnetic field
B = [tex]\frac{9.11*10^{-31*1.0*10^{4} } }{1.6*10^{-19}*0.02 }[/tex]
= [tex]\frac{9.11*10^{-27} }{3.2*10^{-21} }[/tex]
B = 2.85 × [tex]10^{-6}[/tex] Tesla
b. Given that; N/L = 25 turns per centimetre, then the current, I, can be determined by;
B = μ I N/L
⇒ I = B ÷ μN/L
where B is the magnetic field, μ is the permeability of free space = 4.0 ×[tex]10^{-7}[/tex]Tm/A, N/L is the number of turns per length.
I = B ÷ μN/L
= [tex]\frac{2.85*10^{-6} }{4*10^{-7} *25}[/tex]
I = 0.285 A
Your roommate is working on his bicycle and has the bike upside down. He spins the 68.0 cm -diameter wheel, and you notice that a pebble stuck in the tread goes by three times every second. A. What is the pebble's speed? B. What is the pebble's acceleration?
Answer:
a. 6.41 m/s
b. 120.85 m/s^2
Explanation:
The computation is shown below:
a. Pebble speed is
As we know that according to the tangential speed,
[tex]v = r \times \omega[/tex]
[tex]= \frac{0.68}{2} \times 18.84[/tex]
= 6.41 m/s
The 18.84 come from
[tex]= 2 \times 3.14 \times 3[/tex]
= 18.84
b. The pebble acceleration is
[tex]a = \frac{v^2}{r}[/tex]
[tex]= \frac{6.41^2}{0.34}[/tex]
= 120.85 m/s^2
We simply applied the above formulas so that the pebble speed and the pebble acceleration could come and the same is to be considered
Assume you have a rocket in Earth orbit and want to go to Mars. The required change in velocity is ΔV≈9.6km/s . There are two options for the propulsion system --- chemical and electric --- each with a different specific impulse. Recall that the relationship between specific impulse and exhaust velocity is: Vex=g0Isp Using the Ideal Rocket Equation and setting g0=9.81m/s2 , calculate the propellant fraction required to achieve the necessary ΔV for each of propulsion system. Part 1: Cryogenic Chemical Propulsion First, consider a cryogenic chemical propulsion system with Isp≈450s . Enter the required propellant fraction as a proportion with at least 2 decimal places (i.e., enter 0.25 to represent 25%): incorrect Part 2: Electric Propulsion Next, consider an electric propulsion system with Isp≈2000s . Enter the required propellant fraction as a proportion with at least 2 decimal places (i.e., enter 0.25 to represent 25%):
Answer: Part 1: Propellant Fraction (MR) = 8.76
Part 2: Propellant Fraction (MR) = 1.63
Explanation: The Ideal Rocket Equation is given by:
Δv = [tex]v_{ex}.ln(\frac{m_{f}}{m_{e}} )[/tex]
Where:
[tex]v_{ex}[/tex] is relationship between exhaust velocity and specific impulse
[tex]\frac{m_{f}}{m_{e}}[/tex] is the porpellant fraction, also written as MR.
The relationship [tex]v_{ex}[/tex] is: [tex]v_{ex} = g_{0}.Isp[/tex]
To determine the fraction:
Δv = [tex]v_{ex}.ln(\frac{m_{f}}{m_{e}} )[/tex]
[tex]ln(MR) = \frac{v}{v_{ex}}[/tex]
Knowing that change in velocity is Δv = 9.6km/s and [tex]g_{0}[/tex] = 9.81m/s²
Note: Velocity and gravity have different measures, so to cancel them out, transform km in m by multiplying velocity by 10³.
Part 1: Isp = 450s
[tex]ln(MR) = \frac{v}{v_{ex}}[/tex]
ln(MR) = [tex]\frac{9.6.10^{3}}{9.81.450}[/tex]
ln (MR) = 2.17
MR = [tex]e^{2.17}[/tex]
MR = 8.76
Part 2: Isp = 2000s
[tex]ln(MR) = \frac{v}{v_{ex}}[/tex]
ln (MR) = [tex]\frac{9.6.10^{3}}{9.81.2.10^{3}}[/tex]
ln (MR) = 0.49
MR = [tex]e^{0.49}[/tex]
MR = 1.63