60 Grams are produced due to the fact that it may not produce more due to the certain capacity that varies on the size of the cube.
Which of these lead (II) salts will dissolve to the greatest extent in water?
a. PbSO4, Ksp = 1.7x10^-8
b. PbI2, Ksp = 6.5x10^-9
c. PbCrO4, Ksp = 1.8x10^-14
d. PbS, Ksp = 2.5x10^-27
e. Pb3(AsO4)2, Ksp = 4.0x10^-36
Answer:
a. PbSO4, Ksp = 1.7x10^-8.
Explanation:
Hello!
In this case, since the solubility product indicates how likely a solid is able to ionize and consequently dissolve in water, we can infer that the larger the solubility product Ksp, the more ions are able dissolve in water; therefore the proper answer goes with the largest Ksp, which is a. PbSO4, Ksp = 1.7x10^-8 since the power goes closer to 1 than the other options.
Best regards!
Which of these mixtures would NOT be separated by using simple distillation?
Ink and water
Salt and water
Sand and water
There is a golden role of solubility, polar solute dissolve in polar solvent and non polar solute dissolve in non polar solvent. Therefore, the correct option is option B that is Salt and water.
What is solution?Solutions are a homogeneous mixture of two or more substances. A solution is a homogeneous mixture of solvent and solute molecules. Solvent is a substance that is in large amount in solution. solute is the substance which is in small amount in a solution. There are two types of mixture that is homogeneous and heterogeneous. Solution is a homogeneous solution.
Salt and water because salt is transparent and will dissolve into the water among given solute, salt NaCl is a polar solute which will dissolve in polar solvent that is water.
Therefore, the correct option is option B that is Salt and water.
To know more about solution, here:
https://brainly.com/question/13812915
#SPJ2
The properties of compund are different from the properties of their constituenr
Answer: Atoms of carbon and hydrogen
Explanation:
Calculate the internal energy of a system (in kiloJoules) that absorbs 14.73 kJ while being compressed with a pressure of 1.54 atm from 5.72 L to 1.0 L. Answer to one decimal space.
The internal energy of a system : 21.9 kJ
Further explanationThe laws of thermodynamics 1 state that energy can be changed but cannot be destroyed or created
The equation is:
ΔU=Q+W
Energy owned by the system is expressed as internal energy (U)
The sign rules for heat and work are set as follows:
• The system receives heat, Q +
• The system releases heat, Q -
• The system does work, W -
• the system accepts work, W +
The system absorbs 14.73 kJ⇒Q=+14.kJ
The system compressed⇒work done on the gas⇒W=+
W=-PΔV
[tex]\tt W=-1.54(1-5.720)\\\\W=7.2688[/tex]
[tex]\tt internal~energy(\Delta U)=Q+W\\\\\Delta U=14.73+7.2688\\\\\Delta U=21.9[/tex]
Plz what’s the answer to this
Answer: E
Explanation:hope this helps you out
Balance the following equations ___Fe + __O2= ___Fe3O4
how many atoms does sodium hypochlorite have?
Answer:
NaClO; the contained elements ae Na, Cl, O.
The chart shows the frequencies of certain colors of visible light. A 2 column table with 4 rows. The first column is labeled light with entries red, violet, green, orange. The second column is labeled frequency in hertz with entries 4.5 times 10 Superscript 14 baseline, 7.5 times 10 Superscript 14 baseline, 6.0 times 10 Superscript 14 baseline, 5.0 times 10 Superscript 14 baseline. Which colors will eject electrons when they strike sodium, which has a frequency threshold of 5.7 × 1014 Hz? violet and green red and orange violet only red, violet, green, and orange
Answer:
Violet only
Explination:
Violet is the only color that will eject electrons when it strikes sodium.
The colors that will eject electrons when there's a strike with sodium from the chart will be A. Violet and green.
ElectronsFrom the complete information, William made a chart in order to illustrate the result of the experiment that was made with the photoelectric effect.
In this case, the colors that will eject electrons when they strike sodium, with the frequency threshold will be violet and green.
This was gotten from the result that the frequencies of light were lower than the frequency threshold.
Learn more about electrons on:
https://brainly.com/question/860094
H20+ SO3 ? Which compound is likely produced by the chemical reaction?
Answer:
h2so4
Explanation:
im big brain.
What name is given to the elements that appear in the right-most column of the periodic
table?
- Alkali metals
- Alkaline earth metals
- Transition metals
- Noble gases
(NOBLE GASES IS ANSWERR)
Answer:
Noble gases... (You already know...)
Explanation:
The right-most column of the periodic table contains atoms with full electron shells, also known as Noble Gases.
Hope this helped!
Answer:
Noble gases
Explanation:
The six elements listed in the last column of the table (Group 18) of the periodic table are collectively referred to as the noble gases. All of the noble gases have the maximum number of electrons possible in their outer shells (two electrons in helium’s outer shell, and eight electrons for all the others), making them stable.
Describe the potential energy of a chemical reaction and how the energy is accessed?
Explanation:
The energy released due to breakage of bond or we can say that protons and electrons go from a structure of higher potential energy to lower potential energy. During this change, potential energy is converted to kinetic energy in form of heat.
Generally chemical potential energy is accessed in form heat, which the difference between the potential energies of reactant and product.
Determine the molarity of a solution prepared by dissolving 0.198 g of "KHP" (C8H5O4K) in enough water to make 125 mL of solution.
When the solution is found and titrated with aqueous sodium hydroxide, the endpoint is reached after the addition of 27.80 mL of base solution. How many moles of NaOH reacted? What is the concentration of the NaOH?
Answer:
0.007756M KHP; 0.0009695 moles NaOH reacts; 0.03488M NaOH.
Explanation:
Potassium hydrogen phthalate, KHP, is a salt used as standard to determine concentration of basic solutions as NaOH solutions.
To find molarity of the KHP solution we need to convert mass of KHP to moles and divide this in 125mL = 0.125L:
Moles KHP -Molar mass: 204.22g/mol-:
0.198g * (1mol / 204.22g) = 0.0009695 moles KHP
Molarity:
0.0009695 moles KHP / 0.125L = 0.007756M KHP
NaOH reacts with KHP as follows:
NaOH + KHP → Na⁺ + KP⁻ + H₂O
That means 1 mole of NaOH reacts per mole of KHP, that means moles of NaOH that reacts are = Moles of KHP added:
0.0009695 moles NaOH reacts
In 27.80mL = 0.02780L the NaOH was contained. Molarity is:
0.0009695 moles NaOH / 0.02780L =
0.03488M NaOH
Moles of NaOH added will be "0.034".
According to the question,
→ [tex]Molarity = \frac{Number \ of \ moles}{Volume}[/tex]
By substituting the values, we get
[tex]= \frac{0.198}{204}\times \frac{1000}{125}[/tex]
[tex]= 0.0077 \ M[/tex]
Let,
The number of moles added be "[tex]M_2[/tex]".Now,
→ [tex]M_1 V_1 = M_2 V_2[/tex]
→ [tex]0.0077\times 125=M_2\times 27.8[/tex]
→ [tex]M_2 = 0.034 \ moles[/tex]
Thus the above answer is appropriate.
Learn more:
https://brainly.com/question/23931328
A competitive high school swimmer takes 56.7 seconds to swim 100. yards. What is his rate in m/min?
m
min
Answer:
96.72 m/min
Explanation:
The following data were obtained from the question:
Time (t) = 56.7 s
Distance (d) = 100 yard
Rate (R) =?
Next, we shall convert 56.7 s to minutes. This can be obtained as follow:
60 s = 1 min
Therefore,
56.7 s = 56.7 s × 1 min /60 s
56.7 s = 0.945 min
Next, we shall convert 100 yard to metre (m). This can be obtained as follow:
1 yard = 0.914 m
Therefore,
100 yard = 100 yard × 0.914 m /1 yard
100 yard = 91.4 m
Finally, we shall determine the rate of the swimmer as follow:
Time (t) = 0.945 min
Distance (d) = 91.4 m
Rate (R) =?
R = d/t
R = 91.4/0.945
R = 96.72 m/min
Thus the rate of the swimmer is 96.72 m/min
Toluene is subjected to the action of the following reagents in the order given: (1) KMnO4,OH-, heat; then H3O (2) HNO3, H2SO4 (3) Br2, FeBr3 What is the final product of this sequence?
Answer:
See image attached
Explanation:
The reaction of toluene with alkaline potassium permanganate in the presence of heat leads to the oxidation of the -CH3 to give benzoic acid.
Reaction benzoic acid with HNO3/H2SO4 yields the nitronium ion (NO2+).
Recall that -COOH is a metal director and deactivated the ring towards electrophilic substitution hence the m-nitrobenzoic acid is formed.
Reaction with FeBr3/Br2 yields the product shown in the image attached.
A compound of copper and sulfur contains 76.84 g of metal and 38.53 g of nonmetal. How many grams of copper are in 3801 kg of the compound? How many grams of sulfur?
Answer:
There are:
2'531,500 g Cu1'269,500 g SExplanation:
First calculate the percentage of Cu and S in the compound:
Total mass = 76.84 g + 38.53 g = 115.37 g% metal (Cu) = 76.84/115.37 * 100% = 66.6%% metal (S) = 38.53/115.37 * 100% = 33.4%These percentages will remain the same no matter how much of the compound we analyze.
Now we calculate the grams of Cu and S in 3801 kg of the compound:
kg Cu = 3801 kg * 66.6/100 = 2531.5 kg Cug Cu = 2531.5 kg * 1000 = 2531500 g Cukg S = 3801 kg * 33.4/100 = 1269.5 kg Sg S = 1269.5 kg * 1000 = 1269500 g SSuppose there is a gaseous mixture of nitrogen and oxygen. If the total pressure of the mixture is 480 mmHg, and the partial pressure of nitrogen is 290 mmHg, calculate the partial pressure of oxygen in the mixture using Dalton's law.
Answer:
Partial pressure of oxygen = 190 mmHg
Explanation:
From the question;
Mixture contains only nitrogen and oxygen
Total pressure of the mixture = 480 mmHg
Partial pressure of nitrogen = 290 mmHg
Dalton's law states that the pressure of a system is as a result of the sum of the partial pressures of the individual components of the mixture. This means that in this mixture;
Pressure of mixture = Partial Pressure of Nitrogen + Partial Pressure of Oxygen
480 = 290 + Partial pressure of oxygen
Partial pressure of oxygen = 480 - 290
Partial pressure of oxygen = 190 mmHg
DO NOT TROLL AND ANSWER WITHOUT THE CORRECT ANSWER! I EXPECT THE CORRECT ANSWER NOT A TROLL SO IF YOU DONT HAVE THE ANSWER DO NOT WRITE ANYTHING. IF YOU TROLL I WILL REPORT YOU
A weather balloon with a volume of 3.40774 L
is released from Earth’s surface at sea level.
What volume will the balloon occupy at an
altitude of 20.0 km, where the air pressure is
10 kPa?
Answer in units of L.
Answer: The volume occupied at an altitude of 20.0 km is 34.5289 L
Explanation:
Boyle's Law: This law states that pressure is inversely proportional to the volume of the gas at constant temperature and number of moles.
[tex]P\propto \frac{1}{V}[/tex] (At constant temperature and number of moles)
where,
[tex]P_1[/tex] = initial pressure of gas = 101.325 kPa ( sea level)
[tex]P_2[/tex] = final pressure of gas = 10 kPa
[tex]V_1[/tex] = initial volume of gas = 3.40774 L
[tex]V_2[/tex] = final volume of gas = ?
Now put all the given values in the above equation, we get the final pressure of gas.
[tex]101.325\times 3.40774=10\times V_2[/tex]
[tex]V_2=34.5289L[/tex]
Therefore, the volume occupied at an altitude of 20.0 km is 34.5289 L
Which of the following statements correctly describes the function of cell parts?
A. The cell membrane determines which type of cell will develop.
B. The nucleus contains all the nutrients that the cell needs.
C. The mitochondria are the power plants of the cell.
D. The genes contain hemoglobin.
The statements correctly describes the function of cell parts is the mitochondria are the power plants of the cell. Therefore, option C is correct.
What do you mean by the mitochondria ?The cytoplasm of a cell contains tiny structures (fluid that surrounds the cell nucleus). The majority of a cell's energy is produced by mitochondria, which also have unique genetic material distinct from that present in the nucleus.
Oxidative phosphorylation, which produces ATP using the energy generated during the oxidation of the food we ingest, is the traditional function of mitochondria.
For the majority of biochemical and physiological activities, including growth, mobility, and equilibrium, ATP is used as the main energy source in turn.
Thus, option C is correct.
To learn more about the mitochondria, follow the link;
https://brainly.com/question/10688306
#SPJ6
in which beakers are the particles moving the most slowly
Answer:
A and D
Explanation:
Which statement describes how phase changes can be diagrammed as a substance is heated?
The phase is on the y-axis and the temperature is on the x-axis.
The temperature is on the y-axis and the phase is on the x-axis.
The time is on the y-axis and the temperature is on the x-axis.
The temperature is on the y-axis and the time is on the x-axis.
Answer:
The temperature is on the y-axis and the time is on the x-axis.
Explanation:
Which statement describes how phase changes can be diagrammed as a substance is heated? (D is the answer)
The phase is on the y-axis and the temperature is on the x-axis.
The temperature is on the y-axis and the phase is on the x-axis.
The time is on the y-axis and the temperature is on the x-axis.
The temperature is on the y-axis and the time is on the x-axis.
Which statement describes the appearance of a temperature-vs.-time graph? (C is the answer)
A horizontal line shows that the temperature increases at a constant rate over time.
A vertical line shows that the temperature decreases at a constant rate over time.
Horizontal lines where the temperature is constant during phase changes connect upward-sloping lines where the temperature increases.
Horizontal lines where the temperature increases are connected by upward-sloping lines where the temperature is constant for each phase.
What is the answer? Please
Answer:
Cell
Explanation:
I just passed this unit a month ago.
Answer:
It is 6. Cell
Explanation:
Cells make up the smallest level of a living organism such as yourself and other living things. The cellular level of an organism is where the metabolic processes occur that keep the organism alive. That is why the cell is called the fundamental unit of life.
I really hope this helped. God bless you and have a great day! :-)
List any three quantum numbers that describe an electron in an atom and state the relationship between any of the two
Explanation:
To completely describe an electron in an atom, four quantum numbers are needed: energy (n), angular momentum (ℓ), magnetic moment (mℓ), and spin (ms).
Please follow me and make me Brainless
If the net force acting on an object is 0 N, the forces are
Since the forces equal to 0, it's balanced because the object isn't moving.
A hutch weighs 150 lbs and it’s base has a length and width of 15 in and 34 in, respectively. What is the pressure exerted by the hutch on the floor?
Answer:0.29
Explanation:
To determine the pressure of the hutch on the floor, we must first calculate the area of the base of the hutch.
A=lw=(15in.)(34in.)=510in.2
We can now use the formula to calculate pressure.
P=FAP=150lbs510in.2P≈0.294lbin.2
Rounding to two significant figures, the pressure exerted by the hutch on the floor is 0.29lbin.2.
If 75J of heat are applied to 8.4 L of a gas at 732 mmHg and 298K, what is the final temperature, in K, of the gas? Cp for an ideal gas is 20.79 J/mol*K.
Answer:
309 K
Explanation:
Step 1: Convert the pressure to atm
We will use the conversion factor 1 atm = 760 mmHg.
732 mmHg × 1 atm/760 mmHg = 0.963 atm
Step 2: Calculate the moles (n) of the ideal gas
We will use the ideal gas equation.
P × V = n × R × T
n = P × V/R × T
n = 0.963 atm × 8.4 L/0.0821 atm.L/mol.K × 298 K
n = 0.33 mol
Step 3: Calculate the temperature change
We will use the following expression.
Q = n × Cp × ΔT
ΔT = Q/n × Cp
ΔT = 75 J/0.33 mol × 20.79 J/mol.K
ΔT = 11 K
Step 4: Calculate the final temperature
T = 298 K + 11 K = 309 K
In a titration, you start with 0.05 M sodium hydroxide (NaOH) and slowly add it to 40 mL of HC1 with an unknown concentration. What is the original concentration of the HC1 if you add a total of 15.4 mL of sodium hydroxide to the HC1 to achieve pH =7?
Answer:
The original concentration of the HCl is: 0.01925 M
Explanation:
Equation:
HCl+NaOH-------> NaCl+H₂O
Volume of NaOH added = 0.05 M
No of moles of NaOH = 15.4 mL [tex]x\frac{1 L}{1000 mL} x\frac{0.05 mol NaOH}{L}[/tex]
= 0.00077 mol NaOH
Then,
Volume of HCl solution = 40 mL x 1/1000 mL
= 0.0400 L
Therefore,
Concentration of HCl = 0.00077 mol/0.0400 L
= 0.01925 M
Now, to find the pH:
pH = -log₁₀[H⁺]
= -log₁₀(2x10⁻⁶)
= 5.7
A gas at -20c occupies volume 140 ml calculate temperature at which the volume of the gas becomes 65 ml pressure constant
Answer:
–156 °C
Explanation:
The following data were obtained from the question:
Initial temperature (T1) = –20 °C
Initial volume (V1) = 140 mL
Final volume (V2) = 65 mL
Final temperature (T2) =?
Pressure = constant.
Next, we shall convert –20 °C to Kelvin temperature. This can be obtained as follow:
T(K) = T(°C) + 273
Initial temperature (T1) = –20 °C
Initial temperature (T1) = –20 °C + 273 = 253 K.
Next, we shall determine the new temperature of the gas as follow:
Initial temperature (T1) = 253 K
Initial volume (V1) = 140 mL
Final volume (V2) = 65 mL
Final temperature (T2) =?
V1/T1 = V2/T2
140/253 = 65/T2
Cross multiply
140 × T2 = 253 × 65
140 × T2 = 16445
Divide both side by 140
T2 = 16445 /140
T2 = 117 K
Finally, we shall convert 117 K to celcius temperature. This can be obtained as follow:
T(°C) = T(K) – 273
T2 = 117 K
T2 = 117 K – 273
T2 = –156 °C
Thus, the new temperature of the gas is –156 °C
Which process is shown in the diagram?
0,
ing
CO, +H,0
Chloroplast
Mitochondrion
Sugar
Heat
o
ATP
Respiration
The cellular respiration process, which generates ATP as the final result, employs oxygen and sugar as reactants. So, the correct option is A.
What is Cellular respiration?Cellular respiration is the process by which organisms combine oxygen with food molecules, channeling the chemical energy from those resources into life-sustaining activities while eliminating carbon dioxide and water as waste.
Both oxygen and glucose are reactants in the mobile respiratory system. ATP is the primary component of mobile respiration; waste products include carbon dioxide and water.
Oxygen might be present or absent while cells are respiring. Nonetheless, the activity is essentially known as "cellular respiration" because the cell seems to "respire" by consuming molecular oxygen (as an acceptor of electron) and exhaling carbon dioxide (as an end product).
Therefore, the correct option is A.
Learn more about Cellular respiration, here:
https://brainly.com/question/29760658
#SPJ7
Your question is incomplete, most probably the complete question is:
The process shown in the diagram produces oxygen and sugar. Which
process uses oxygen and sugar as reactants?
Chloroplast
Mitochondrion
Sugar
CO, +H,0
ATP
Heat
Respiration
A. Cellular respiration
B. Water cycle
c. Transpiration
D. Photosynthesis
ONLY ANSWER IF YOU PLAY ADOPT ME ON ROB.LOX!!! tell me your best pet and user name in your answer plz.
READ!!!!! p.s. i have a fly ride T rex and more! also, STAY ON THE PAGE SO I COULD RESPOND AND WE COULD PLAY! yay!! :) :)
Answer:
I play!!!!!!!!
Explanation:
What does this passage explain about people?
why mothers favor some children over others
the contrasting sides of human nature
why there is harmony in all things
left- and right-handedness
Answer:
the contrasting sides of human nature
Explanation:
I took the test