Answer:
burning causes pollution cutting results furniture
Explanation:
are u a nepali ?
Answer:
burning of wood, new substances are formed and hence it is a chemical change. While cutting the wood into small pieces no new substance is formed, thus it is a physical change. Hence, burning of wood and cutting it into small pieces are considered as two different types of changes.
How are elements and compounds a part of our daily lives?
Answer:
Aluminium (A1) -Used in the production of duralumin alloy for use in the construction of aeroplane bodies. 3. Silicon (Si) -To make microchips 4. Sulphur (S) -To make matches, fireworks and for the manufacture of sulphuric acid 5.
Explanation:
Hope this helped!
Answer:
yes
Explanation:
we use different elements and compounds in our life ex salt and iron but most of the substances found in our environment are mixture btw scientists need to classified substances to work with our substances and to study pure substances hope it helps u
Which of the following equations is not balanced?
Explanation:
i think the answer is first and last
The growth of a plant toward light is called _____.
phototropism
tropism
geotropism
It's called phototropism
Answer:
The answer is (Phototropism)
Question 4 of 10
What is the molarity of a solution of 3 moles (mol) of FeBr3 in 1/2 L water?
A.
3 mol/2L
B.
2L/3 mol
C.
0.5L/3 mol
D.
3 mol/0.5 L
SUBMIT
Answer:
B
Explanation:
Answer:
D. 3 mol/0.5 L
Explanation:
Just took the quiz
what is the density of a 100g piece of titanium if a 10g piece of titanium has a density of 4.506g/cm3?
Possible answers:
A: 45.06g/cm3
B:4.506g/cm3
C: 9.1g/cm3
D: 91g/cm3
Answer:
B. Density stays the same no matter how much of a substance there is.
Explanation:
Density of the substance is the same and it is the measure of its mass per unit volume. Thus, the mass of titanium per 1 cm³ is 4.506 g which is the same for 10 g, 100 g or whatever the mass.
What is density ?Density of a substance is the measure of its mass per unit volume. It describes how closely its particles are packed. Density of an object depends on its bond type, temperature and pressure.
The more denser the object is , more will be its mass distribution per unit volume. Substances denser than water will sink on it otherwise they float on water.
Density is constant for a substance, the distribution of given mass per unit volume is same for all masses. Hence, the density of 100 g Ti is same as that of 10 g. i.e., 4.56 g/cm³.
To find more on density, refer here:
https://brainly.com/question/15164682
#SPJ2
In an experiment conducted between oxygen and chlorine gas it was found that oxygen gas spread much faster than chlorine. What is the explanation for this observation?
Answer:
Because oxygen is lighter
Explanation:
which statement below best describes the movement of particles in a gas?
A- the particles vibrate in a fixed position
B-the particles slide easily past one another
C- the particles move freely and are well separated
D- the particles move freely with little free space between the particles.
Answer:
c the particles are spaced out and move freely
Explanation:
Answer:
C). The particles move freely and are well separated
Explanation:
please help me..........
Answer:
4/6
6/9
8/12
Explanation:
What is Jadi? is it goat? what language is Jadi?
Question 14
1 pts
How many moles of NaCl could be found in 0.4 L of a 0.9 M solution? Round your answer to
two decimal places.
Answer:
0.36mol
Explanation:
Given parameters:
Volume of NaCl = 0.4L
Molarity = 0.9M
Unknown:
Number of moles = ?
Solution:
To find the number of moles, the molarity of a solution is the amount of solute contained in a solution.
Molarity = [tex]\frac{number of moles}{volume}[/tex]
Number of moles = molarity x volume
Insert the parameters and solve;
Number of moles = 0.4 x 0.9 = 0.36mol
how is a solute and a solvent different
Calculate the percent composition of C6H12O6
Answer:
Did you just let your cat walk on your keyboard? XD
Could you explain this a bit better please?
I'll answer the question in the replies of this comment if you can give me a bit more information.
Explanation:
May I have brainliest please? :)
3. Does the siren of a moving police car seem to change pitch to the
police officers inside the car? Why or why not?
Answer:
As the police car moves towards them, the pitch of the police car's siren goes up because the sound waves get closer together in front of the police car. When the police car moves away from the person, the pitch goes down because the waves spread out behind the police and that makes the frequency go down.
Explanation:
When you climb to the top of a water slide, you are gaining:
O A. gravitational kinetic energy.
B. chemical potential energy.
c. gravitational potential energy.
D. chemical kinetic energy.
Answer:
C
Explanation:
You climbing the water slide gives you potential energy and your building gravitational eneergy.
When we climb the top of a water slide we are gaining gravitational kinetic energy. That is we are moving through the surface and thus we experience both kinetic energy and gravitational energy.
What is kinetic energy?Kinetic energy of a body is generated by virtue of its motion. Gravitational energy is a form of energy by which the an object attracts other object to its center of mass. Both forms of energy are directly proportional to the mass of the object.
Potential energy is generated by virtue of the position and height of the object. As the height from surface increases, potential energy increases. Potential energy and kinetic energy together called as mechanical energy of an object.
When starts moving our potential energy is converting to kinetic energy. Hence, when we climb the top of a water slide kinetic energy starts to increase. Thus, option A is correct.
To find more on kinetic energy, refer here:
https://brainly.com/question/26472013
#SPJ2
10 g of copper is heated and the mass increases to 12.5 g. What is the mass of the copper in the new substances?
Answer:
10g
Explanation:
The amount of copper in the heated mass of the new substance produced is still 10g because in any chemical action, mass is always conserved.
According to the law of conservation of matter "matter is neither created nor destroyed in a chemical reaction". The change in mass is only due to oxygen gas that combines with the new copper formed or other substances that joined the mass. The substance will still have the same amount of copper as the original one. Since we started with 10g of copper, we end with 10g of copper.Please help i will give brainliest
How much heat is required to raise the temperature of a 6.21 g sample of iron from 25.0 oC to 79.8 oC?
Answer:
151.1J
Explanation:
Given parameters:
Mass of iron = 6.21g
Initial temperature of iron = 25°C
Final temperature of iron = 79.8°C
Unknown:
Amount of heat = ?
Solution:
The amount of heat require to cause this temperature can be determined using the expression below;
H = m c (T₂ - T₁)
H is the amount of heat
m is the mass
c is the specific heat capacity
T is the temperature
Specific heat capacity of iron 0.444J/g°C
Insert the parameters and solve;
H = 6.21 x 0.444 x (79.8 - 25)
H = 151.1J
Write the electron configuration for the electrons identified by the following quantum numbers:
a) 2, 1, 0, -½
b) 4, 2, 0, -½
c) 5, 3, 2, -½
Thanks!
Answer:
see the answer at the pic
The electron configuration for the electrons as listed are:
a) 1s² 2s² 2p⁵ = 9X
b) 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹⁰ 4p⁶ 5s² 4d⁸ = 46 X
c) 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹⁰ 5p⁶ 6s² 4f¹⁴ 5d¹⁰ 6p⁶ 7s² 5f¹⁴
Using the quantum numbers of the identified electrons to derive the electron configuration ( the representation of the distribution of electrons in the orbit of an atom ) electron configuration of electrons can be calculated using the formula :2n².
where n = orbit number and the various energy levels are represented as 1,2,3,4... while shells of the an atom is written as K,L,M,N
hence the electron configuration of the electrons identified by the quantum numbers are as written above.
Learn more : https://brainly.com/question/20974986
Question 2 (1 point)
Which of the following is the main reason the transition metals are able to exist in different forms?
а.
predictability in ability to bond
B.
unfilled d orbitals
C.
magnetic properties
D.
predictability in number of valence electrons
Answer:
B. Unfilled d orbitals
Explanation:
PLEASE HELP ME !!!!!!!
Answer:
it would be 5,045
Explanation:
because it is closer to 5,000. pls correct me if wrong
Calculate how much Carbon Dioxide IN GRAMS needs to be absorbed to
release 500g of oxygen during photosynthesis.
Answer:
687.5 g of CO2
Explanation:
We'll begin by writing the balanced equation for photosynthesis. This is illustrated below:
6CO2 + 6H2O —> C6H12O6 + 6O2
Next, we shall determine the mass of CO2 absorbed and the mass of O2 released from the balanced equation. This is illustrated below:
Mass of CO2 = 12 + (2 × 16) = 12 + 32
= 44 g/mol
Mass of CO2 from the balanced equation = 6 × 44 = 264 g
Molar mass of O2 = 2 × 16 = 32 g/mol
Mass of O2 from the balanced equation = 6 × 32 = 192 g
Summary:
From the balanced equation above,
264 g of CO2 were absorbed to release 192 g of O2.
Finally, we shall determine the mass of CO2 absorbed to release 500 g of O2. This can be obtained as follow:
From the balanced equation above,
264 g of CO2 were absorbed to release 192 g of O2.
Therefore, Xg of CO2 will be absorbed to release 500 g of O2 i.e
Xg of CO2 = (264 × 500)/192
Xg of CO2 = 687.5 g
Thus, 687.5 g of CO2 will be absorbed to release 500 g of O2.
What are the coefficients that will balance the skeleton equation below?
___GaF3 +___KCN rightwards arrow___Ga(CN)3 + ___KF
A.
1, 3, 1, 3
B.
3, 1, 3, 1
C.
1, 1, 1, 3
D.
1, 3, 3, 1
1 points
QUESTION 6
The previous question is an example of what type of chemical equation?
A.
Synthesis
B.
Decomposition
C.
Single Re-Placement
D.
Double Re-Placement
1, 3, 1, 3
Explanation:
Ga - one on both sides
F - three on both sides
CN - three on both sides
K - three on both sides
But remember that CN was being multiplied by 3 on the right side already, meaning GA(CN)3 didn't mean a coefficient.
Answer:
Double re-placement
The two metals switched dance partners, that means it's a double.
2. What properties do all acids have?
3. Why should you never use taste as a method for testing an unknown substance?
4. What is used to detect the presence of acids?
10. What can you use to detect the presence of a base?
11. What are some common bases that we use every day?
12. How does an antacid help reduce heartburn?
13. What happens when acid and base are mixed
14. What is used to determine the pH of a substance?
15. Describe how the pH scale works. In other words, what is it actually measuring?
17. Why is pH important to our environment?
18. Describe how salt is formed.
Pls help!!!!!
Which models of the atom does the experimental evidence from Bohr's hydrogen experiment support? Explain why these models are compatible with the experimental results.
The models are Daltons, Thompsons, and Rutherfords
Answer:
Rutherfords
Explanation:
The model of the atom supported by Bohr's hydrogen experiment is the Rutherford's model of the atom.
Rutherford through his experiment on gold foil suggested the atomic model of the atom. The model posits that an atom has a small positively charged center(nucleus) where nearly all the mass is concentrated.
Surrounding the nucleus is the large space containing electrons. In the Bohr's model of the atom, he suggested that the extranuclear space of the atom is made up of electrons in specific spherical orbits around the nucleus.List and define the 3 parts of a chemical equation (R->P).
Answer:
R- reactants
arrow- yields
p- products
Explanation:
Below is a phase diagram for Carbon Dioxide. Use this diagram to answer the following question.
In this example we will start the Carbon Dioxide out at a temperature of -20oC and 1 atm of pressure. If the pressure was raised to 100 atm of pressure while still staying at -20oC, what phases would the Carbon Dioxide change between?
When the following equation is balanced, what is the coefficiant for Br?
___I2 +___NaBr rightwards arrow___NaI +_?_Br2
A.
6
B.
3
C.
1
D.
2
1 points
QUESTION 10
The previous question is an example of what type of chemical reaction?
A.
Synthesis
B.
Decomposition
C.
Single Re-Placement
D.
Double Re-Placement
Answer:
1. A 2. C
Explanation:
because it just is
How many orbitals surround the nucleus in a neutral atom of sulfur (S)?
1
3
5
6
Why should a hypothesis be testable?
A. It must be testable in order to be found true or false.
B. It must be testable for the outcome to be predictable.
C. It must be testable for other scientists to consider it reliable.
D. It must be testable if it is to become a scientific theory.
Helpppppp i hate chemistry
I will give brainiest who helps me with the correct answer
I promise
5. Name the compound which contain Strontium, Fluorine, and Oxygen.
Options:
Strontium fluorate
Strontium fluoride
Strontium chlorate
Strontium fluorine
Which state of matter do mercury, orange juice and lava represent?
Answer:
they represent liquid state of matter.
Answer:
they state liquid state of matter .
hope it is helpful to you