Which will change will cause the gravitational force between a baseball and a soccerball

Answer:

A. 257600g (i.e 257.6 Kg) of CaO were produced.

B. 202400g (i.e 202.4 Kg) of CO2 were produced.

Explanation:

We'll begin by calculating the mass of CaCO3 present in 5×10² Kg of lime stone. This is illustrated below:

From the question given, the lime stone contains 92% of CaCO3.

Mass of CaCO3 = 92% x 5×10² Kg

Mass of CaCO3 = 92/100 x 5×10² Kg

Mass of CaCO3 = 460 Kg

Therefore, 460 kg of CaCO3 is present in the lime stone.

Next, we shall determine the mass of CaCO3 that was heated and the masses of CaO and CO2 produced from the balanced equation. This is illustrated below:

CaCO3(s) —> CaO(s) + CO2(g)

Molar mass of CaCO3 = 40 + 12 + (16x3) = 100g/mol

Mass of CaCO3 from the balanced equation = 1 x 100 = 100g

Molar mass of CaO = 40 + 16 = 56g

Mass of CaO from the balanced equation = 1 x 56 = 56g

Molar mass of CO2 = 12 + (2x16) = 44g/mol

Mass of CO2 from the balanced equation = 1 x 44 = 44g

Summary:

From the balanced equation above,

100g of CaCO3 were heated to produce 56g of CaO and 44g of CO2.

A. Determination of the mass of quick lime, CaO produced by heating 5×10² Kg of lime stone.

5×10² Kg of lime stone contains 460 Kg (i.e 460×10³ g) of CaCO3.

From the balanced equation above,

100g of CaCO3 were heated to produce 56g of CaO.

Therefore, 460×10³g of CaCO3 will be heated to produce = (460×10³ x 56)/100 = 257600g of CaO.

Therefore, 257600g (i.e 257.6 Kg) of CaO were produced.

B. Determination of mass of carbon dioxide, CO2 produced by heating 5×10² Kg of lime stone.

5×10² Kg of lime stone contains 460 Kg (i.e 460×10³ g) of CaCO3.

From the balanced equation above,

100g of CaCO3 were heated to produce 44g of CO2.

Therefore, Therefore, 460×10³g of CaCO3 will be heated to produce = (460×10³ x 44)/100 = 202400g of CO2.

Therefore, 202400g (i.e 202.4 Kg) of CO2 produced.

Answer:

What are the periodic trends of ionic radii? Check all that apply.

*Ionic radii tend to increase down a group.

Ionic radii tend to decrease across a period.

Anionic radii tend to increase across a period.

*Cationic radii tend to decrease across a period.

*Ionic radii increase when switching from cations to anions in a period.

Answer:

- Ionic Radii Tend To Increase Down A Group.

- Cationic Radii Tend To Decrease Across A Period.

- Ionic Radii Increase When Switching From Cations To Anions In A Period.

Explanation:

i got it correct on edge

Answer:

photosynthesis maybe

Explanation:

bare with me i may be wrong or i may be right it's been a while since i've been in a chem classroom. so basically during photosynthesis a plant is taking the energy from the sun, H2O, and CO2, this ends up being like 6CO2 + 6H20 + (energy), and it converts this energy to glucose (→ C6H12O6 + 6O2 ) so the energy is never used up in this process it is merely changed. i don't really know but i hope it at least helps some

Answer:

You should get the catalyst back already.

Explanation:

A catalyst shouldn't be used up during a chemical reaction. It is used to speed up a reaction, but it shouldn't disappear/be used up by a chemical reaction.

Answer:

Explanation:

The initial chemical energy is 50 J. The arrow for heat is the widest output arrow. The arrow for chemical energy is the shortest output arrow.

Answer:

Where are the answer choices

?

Answer:

Diagram B shows the correct arrangement of electrons in the product.

Magnesium reacts with fluorine to form magnesium fluoride two electrons of magnesium are transferred to the 2 atoms of fluorine and fluorine is the most electronegative element of the periodic table. Option C is correct.

Electronegativity is the tendency or power of an atom to attract the electrons from the metals they are mostly nonmetals and want to complete their octave too.

The most electronegative elements of the periodic table are oxygen, nitrogen, and fluorine, as they are always willing to complete the octave, and fluorine will take electrons from magnesium.

Therefore, Option C is correct if the 2 atoms of fluorine and fluorine are the most electronegative element of the periodic table. Magnesium reacts with fluorine to form magnesium fluoride two electrons of magnesium are transferred.

Learn more about electronegativity, here:

https://brainly.com/question/17762711

#SPJ6

Answer:

2Na + Cl2 ------> 2NaCl

sodium + chlorine = sodium chloride (salt)

Answer:

Sodium chloride NaCl

Explanation:

NaCl will form.

2Na + Cl2 ----> 2NaCl

Each Na atom donates 1 electron from its outermost shell electron to each chlroine atom, so that Na can attain full outermost shell electrons (octet), where it is most stable. Na+ ion is formed after losing 1 electron.

Each chlroine atom gains 1 electron so that it can have 8 outermost shell electrons (stable). It becomes Cl- ion.

Combining Na+ and Cl-, NaCl is formed so that the net charge is 0. To balance the equation, since chlorine exists as diatomic molecule, 2 Na atom reacts with 1 chlorine molecule (2 chlorine atoms) to form 2 NaCl.

Answer : The net ionic equation will be,

[tex]H^{+}(aq)+OH^{-}(aq)\rightarrow H_2O(l)[/tex]

Explanation :

In the net ionic equations, we are not include the spectator ions in the equations.

Spectator ions : The ions present on reactant and product side which do not participate in a reactions. The same ions present on both the sides.

The given balanced ionic equation will be,

[tex]HCl(aq)+NH_4OH(aq)\rightarrow NH_4Cl(aq)+H_2O(l)[/tex]

The ionic equation in separated aqueous solution will be,

[tex]H^+(aq)+Cl^-(aq)+NH_4^+(aq)+OH^-(aq)\rightarrow H_2O(l)+NH_4^+(aq)+Cl^-(aq)[/tex]

In this equation, [tex]NH_4^+\text{ and }Cl^-[/tex] are the spectator ions.

By removing the spectator ions from the balanced ionic equation, we get the net ionic equation.

The net ionic equation will be,

[tex]H^{+}(aq)+OH^{-}(aq)\rightarrow H_2O(l)[/tex]

Answer:

A.

Explanation:

The amount of mass always stays the same, matter cannot be created nor destroyed, it can only change forms. Thus, the answer is A.  

In a chemical reaction the total mass of all the substances taking part in the reaction remains the same. Also, the number of atoms in a reaction remains the same. Mass cannot be created or destroyed in a chemical reaction.

I hope this helps..

Answer:

4.1/  [tex]\frac{41}{10}[/tex]

Explanation

Do the calculation carefully because this calculation has negative term.

I hope you will understand.

3/8 + 7/2 + (-3/5) + 9/8 + (-3/2) + 6/5​

31/5+(-3/5)+(-3/2)

41/10

4.1

Answer:

electronic configuration of Y is 1s²2s²2p⁶3s²3px²3py²3pz¹

Explanation:

The electronic structure of chlorine is 1s²2s²2p⁶3s²3px²3py²3pz¹. The first two electrons are coming from pairs in the 3p levels and are therefore rather easier to remove than if they were unpaired

to remove iodine sublime

to remove sand filter

to remove water evaporate

Explanation:

1. put the mixture in a beaker

2.Heat the mixture using a watch glass filled with cold water, the iodine will sublime at the base of the watch glass.

3.Add water to sand and salt. Stir for salt to diffuse in the water

4.Filter sand from the solution using a filter paper

5.evaporate the remaining water to remain with Salt crystals.

Answer:

c. Chemical bonds are broken, and new ones are formed.

Explanation:

Hope this helps. :)

In a chemical reaction, chemical  bonds are broken, and new ones are formed.

Chemical reactions are defined as reactions which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical reaction.

There are several characteristics of chemical reactions like change in color, change in state , change in odor and change in composition . During chemical reaction there is also formation of precipitate an insoluble mass of substance or even evolution of gases.

There are three types of chemical reactions:

1) inorganic reactions

2)organic reactions

3) biochemical reactions

During chemical reactions atoms are rearranged and changes are accompanied by an energy change as new substances are formed.

Learn more about chemical reactions,here:

https://brainly.com/question/29762834

#SPJ2

Answer:

C. If Assertion is true statement but Reason is false.

Explanation:

The burning of magnesium in air produces magnesium oxide as shown by the equation;

2Mg(s) + O2(g) -----> 2MgO(s)

The magnesium oxide solid is recovered as a white ash. This is a typical example of an oxidation reaction which is also a combustion reaction.

The reason has nothing at all to do with the assertion hence the answer given.

Magnesium oxide is basic just like the oxides of other metals and dissolves in water to yield an alkali.

Answer:

Answer:

C. If Assertion is true statement but Reason is false.

Explanation:

The burning of magnesium in air produces magnesium oxide as shown by the equation;

2Mg(s) + O2(g) -----> 2MgO(s)

The magnesium oxide solid is recovered as a white ash. This is a typical example of an oxidation reaction which is also a combustion reaction.

The reason has nothing at all to do with the assertion hence the answer given.

Magnesium oxide is basic just like the oxides of other metals and dissolves in water to yield an alkali.

Explanation:

Answer:

b

Explanation:

a drug problem consumes the bulk of a persons income because drugs are expensive to buy

A drug problem can quickly consume the bulk of a person income

A drug is any chemical substance that causes a change in an organism's physiology or psychology when consumed. Drug abuse or substance abuse refers to the use of certain chemicals for the purpose of creating pleasurable effects on the brain.

Drug use can have significant and damaging short-term and long-term effects. Taking some drugs can be particularly risky, especially if you take high doses or combine them with other drugs or alcohol.

People of any age, sex or economic status can become addicted to a drug. Certain factors can affect the likelihood and speed of developing an addiction.

The best way to prevent an addiction to a drug is not to take the drug at all. If your doctor prescribes a drug with the potential for addiction, use care when taking the drug and follow the instructions provided by your doctor. Thus you can save your income.

The correct answer is option B.

Learn more about drug problem, refer:

https://brainly.com/question/23284149

#SPJ2

The organelle that is matched correctly is the Cell Wall

The cell wall functions as a protective organelle as well as gives shape to the cell.

The cell wall is an organelle found in prokaryotic cells and plant cells.

Cell walls generally function to protect the cell by delimiting its surroundings the membrane from damage.

They also act as permeable structures to substances as well as give the respective cells their characteristic shapes.

More on cell walls can be found here: https://brainly.com/question/965751

Answer:

i metal

ii nonmetal

iii metal

iv nonmetal

Explanation:

If you look up what the element of a heater is, you get a picture of some sort of rod. It's the heating element of the heater, and must be some type of metal to conduct electricity and warm up. Fishing rods are made of either fiberglass, graphite, or carbon fibre. These are nonmetals. In order for a lightning rod to conduct electricity and bring the lightning down to the ground, it has to be metal. You wouldn't want a metal oven mitt, as that would burn your hand.

Answer:

The enthalpy is increased by the increased heat of the reaction.

Explanation:

In this reaction, as the transition from solid to liquid state, enthalpy increases, that is, the heat applied to change its state is greater and this increases, reaching a mayor disorder.

If the reaction increases its heat, and a liquid state passes, the enthalpy increases, therefore the disorder also and the entropy will also be increased.

Answer:

5.13g of H2O.

Explanation:

We'll begin by writing the balanced equation for the reaction. This is given below:

HBr(aq) + NaOH(aq) —> NaBr(aq) + H2O(l)

Next, we shall determine the masses of HBr and NaOH that reacted and the mass of H2O produced from the balanced equation.

This is illustrated below:

Molar mass of HBr = 1 + 80 = = 81g/mol

Mass of HBr from the balanced equation = 1 x 81 = 81g

Molar mass of NaOH = 23 + 16 + 1 = 40g/mol

Mass of NaOH from the balanced equation = 1 x 40 = 40g

Molar mass of H2O = (2x1) + 16 = 18g/mol

Mass of H2O from the balanced equation = 1 x 18 = 18g

Thus, from the balanced equation above,

81g of HBr reacted with 40g of NaOH to produce 18g of H2O.

Next, we shall determine the limiting reactant. This is illustrated below:

From the balanced equation above,

81g of HBr reacted with 40g of NaOH.

Therefore, 34g of HBr will react with = (34 x 40)/81 = 16.79g of NaOH.

From the calculations made above, we can see that it will take a higher mass (i.e 16.79g) of NaOH than what was given (i.e 11.4g) to react completely with 34g of HBr.

Therefore, NaOH is the limiting reactant and HBr is the excess react.

Finally, we can determine the maximum mass of H2O produced as shown below.

In this case the limiting reactant will used because it will produce the maximum mass of H2O since all of it is consumed in the reaction.

The limiting reactant is NaOH and the maximum mass of H2O produced can be obtained as follow:

From the balanced equation above,

40g of NaOH reacted to produce 18g of H2O.

Therefore, 11.4g of NaOH will react to produce = (11.4 x 18)/40 = 5.13g of H2O.

Therefore, the maximum mass of H2O produced from the reaction is 5.13g.

Answer:

If you know the number of protons and neutrons you have to simply subtract the number of neutrons by number of protons the answer will be number of neutron

Explanation:

Answer:

We can find the amount of electrons through its Atomic number and with the help of electronic configuration

Answer:

The essence including its given problem is outlined in the following segment on the context..

Explanation:

The given values are:

Moles of CO₂,

x = 0.01962

Moles of water,

[tex]\frac{y}{2} =0.01961[/tex]

[tex]y=2\times 0.01961[/tex]

  [tex]=0.03922[/tex]

Compound's mass,

= 0.4647 g

Let the compound's formula will be:

[tex]C_{x}H_{y}O_{z}[/tex]

Combustion's general equation will be:

⇒  [tex]C_{x}H_{y}O_{z}+x+(\frac{y}{4}-\frac{z}{2}) O_{2}=xCO_{2}+\frac{y}{2H_{2}O}[/tex]

On putting the estimated values, we get

⇒  [tex]12\times x=1\times y+16\times z=0.4647[/tex]

⇒  [tex]12\times 0.01962+1\times 0.03922+16\times z=0.4647[/tex]

⇒  [tex]0.27466+16z=0.4647[/tex]

⇒                     [tex]z=0.01187[/tex]

Now,

x : y : z = [tex]0.01962:0.03922:0.01187[/tex]

           = [tex]\frac{0.01962}{0.0118}:\frac{0.03922}{0.0188}:\frac{0.0188}{0.0188}[/tex]

           = [tex]1.6:3.3:1.0[/tex]

           = [tex]3:6:2[/tex]

So that the empirical formula seems to be "C₃H₆O₂".

Answer:OD. Producing light

Explanation:

Answer:

Explanation:

To calculate the number of atoms we must first calculate the number of moles

Molar mass = mass / number of moles

number of moles = mass / Molar mass

Molar mass (K) = 39.10mole

mass = 2.10g

number of moles = 2.10/ 39.10

= 0.0537mol

After that we use the formula

N = n × L

where n is the number of moles

N is the number of entities

L is the Avogadro's constant which is

6.02 × 10^23 entities

Number of K atoms is

N = 0.0537 × 6.02 × 10^13

Hope this helps you.

answer:

a)1.274 g b) 0.013 mole

Explanation:

a) Mass of 1 mol of CuSo4. 5H20=

[tex]63 + 32 + (16 \times 4) + (7 \times 1) + (16 \times 5)[/tex]

=246g

no. moles of CuSo4. 5H2O=

[tex] \frac{mass}{mass \: of \: 1mole} [/tex]

so moles

=

[tex] \frac{3.14}{246} [/tex]

0.013 mole

in the equation

1 mole of sulphuric acid reacts to form 1 mole of CuSo4.5H2O

in other words

0.013 mole of sulphuric acid reacts to form 0.013 mole of CuSo4.5H2O

so mass of 1 mole (Mr) H2So4=

[tex](2 \times 1) + 32 + (16 \times 4)[/tex]

98g

mass of sulphuric acid= mole × mass of 1 mole

so mass= 0.013 × 98

1.274 g

b) In the equation

1 mole of sulphuric acid reacts to form 1 mole of copper(ll) oxide

in other words

0.013 mole of sulphuric acid reacts to form 0.013 mole of copper (ll) oxide

so 0.013 mole of copper(ll) oxide is reacted

Hope it helped and pls mark brainliest

Answer:

A. Supersaturated

Explanation:

i got it right on edge 2021

The heated solution that holds more dissolved solution than it can hold at a lower temperature is supersaturated solution. Therefore, option A is correct.

A solution that contains more solvent than the typical amount that can dissolve at a specific temperature is said to be supersaturated. By introducing a tiny solute crystal known as a seed crystal, the excess dissolved solvent in a super-saturated solution can begin to recrystallize.

A solution that contains more solvent than the typical amount that can dissolve at a specific temperature is said to be supersaturated. A solution is considered supersaturated if it contains more solute than is necessary to saturate it.

A solution that contains more solute than it can hold at a specific temperature is said to be supersaturated. Usually, raising a solution's temperature causes more particles to dissolve, increasing the solute concentration.

Thus, option A is correct.

To learn more about supersaturated solution, follow the link;

https://brainly.com/question/1432936

#SPJ6

Energy storage and transport. Chemical energy transport.

Answer:

to clean the water

Explanation:

Answer:

1:1

Explanation:

There is one mole of zinc (Zn) and one mole of zinc sulfate (ZnSO₄).

The mole ratio is 1:1.

Hope this helps.

Answer:

1:1

Explanation: