Differentiated services describes a field in the ipv4 packet header that contains an 8-bit binary value used to determine the priority of each packet.
What is ipv4 packet?Application data, including usage and source/destination addresses, is contained in an Internet Protocol version 4 (IPv4) packet header. 20 bytes of data make up an IPv4 packet header, which is typically 32 bits long.
A packet is a network communication data unit with fixed or variable lengths. The header, body, and trailer are the three parts that make up a single packet.
A 20-byte header contains almost 13 multipurpose fields that each hold a specific piece of related object information, such as the application, data type, and source and destination addresses. The following are thorough descriptions of each header field:
Version: This only uses four packet header bits and contains the Internet header format.Internet header length (IHL): Information about IP header length is kept in this 32-bit field.Service type (ToS): This lists the network service parameters.Datagram size: This has combined data and header length.Learn more about IPv4 packet
https://brainly.com/question/29316957
#SPJ4
For which of the following network conditions must you use a protocol analyzer or network monitor for further diagnosis? (Choose all that apply.)
a. Cable break
b. Cable short
c. Slow network performance
d. High rate of transmission errors
For Slow network performance and High rate of transmission errors the following network conditions must you use a protocol analyzer or network monitor for further diagnosis.
What is Protocol analyzer?
A Protocol Analyzer is a tool or device that measures and monitors data transmitted over a communication channel. It intercepts data on the communication channel and converts the bits into a meaningful protocol sequence.
A protocol analyzer analyzes and captures data over a communication channel using a combination of software and hardware. It enables the engineer to comprehend the protocol and analyze the captured protocol sequence further. The protocol analyzer is extremely useful in debugging device and bus failures in embedded systems.
To learn more about Protocol analyzer, visit: https://brainly.com/question/28204932
#SPJ4
You are looking for a term that can be used to refer collectively to hard disks and SSDs inside a computer. Which of the following can you use?
-internal hard drives
-SANs
-memory sets
-optical storage devices
Internal hard disks can be used as a general term to refer to hard discs and SSDs found inside of machines.
Describe SSD.
In the hierarchy of computer storage, a solid-state drive (SSD) is a solid-state storage device that employs integrated circuit assemblies to store data persistently, generally using flash memory. Despite the fact that SSDs lack the physical spinning discs and moving read-write heads used in hard disc drives (HDDs) and floppy discs, they are also sometimes referred to as semiconductor storage systems, solid-state devices, or solid-state discs. SSDs have such a lot of intrinsic parallelism for data processing.
To know more about SSD
https://brainly.com/question/4323820
#SPJ4
Which network layer protocol is used if a host without an ip address tries to obtain an ip address from a dhcp server.
A connectionless service paradigm is used by DHCP, which makes use of the User Datagram Protocol (UDP).
DHCP protocol operates at what layer?A client computer on the network can obtain an IP address and other configuration parameters from the server using the application-layer protocol known as DHCP.A network protocol called Dynamic Host Configuration Protocol (DHCP) is used to set up network devices for IP network communication.A DHCP client obtains configuration data from a DHCP server using the DHCP protocol, such as an IP address, a default route, and one or more DNS server addresses.Enhancements to DHCP auto-provisioning have been added for Layer 2 and Layer 3 devices.To learn more about DHCP protocol refer to:
https://brainly.com/question/14234787
#SPJ4
when importing a text file, why is it important to move through each step of the text import wizard? power bi
A data management tool called Data Import Wizard is included in Salesforce's Setup menu.
How do I use text import wizard?the Data tab > Get & Transform Data > Get Data > Legacy Wizards > From Text when it has been enabled (Legacy). The Text Import Wizard will then launch once you double-click the text file you wish to import in the Import Text File dialog box.You may import data from a Microsoft Excel spreadsheet to a worksheet grid with the help of the Import Wizard. Choose the spreadsheet you wish to import in the wizard, then either use the default template or create your own template. You can store the templates you make for later use.To learn more about Data Wizard refer,
https://brainly.com/question/29305580
#SPJ4
we can only make valid predictions for y values within the bounds of the minimum and maximum of x values for a dataset. attempting to predict outside this range is called
We can only make valid predictions for y values within the bounds of the minimum and maximum of x values for a dataset. Attempting to predict outside this range is called extrapolation.
Since, by extrapolating beyond the range of existing data, we are making predictions based on limited assumptions or knowledge. Therefore, predictions made by extrapolation are often considered less reliable and valid than predictions made with data points within the range of existing data.
What are the limitations of extrapolation?Extrapolation relies on limited data points and can lead to inaccurate predictions.It assumes that the data points that are available are representative of the entire population.It assumes that the pattern or trend that is extrapolated will remain constant over time.Extrapolated predictions cannot take into account any changes in the environment or other factors that may affect the outcome.Extrapolation can lead to over-simplified or biased predictions.Learn more about the limitations of extrapolation:
https://brainly.com/question/11106137
#SPJ4
most of the modern programming languages are 3gl and require programmers to have a considerable amount of programming knowledge. group of answer choices true false
It is true that most modern programming languages are 3gl and require programmers to have a considerable amount of programming knowledge.
A programming language is a notation system for creating software applications. The majority of programming languages are conventional text-based languages, although they can also be visual. They are a type of programming language. A third-generation programming language (3GL) is now a high-level computer programming language that is more computer as well as programmer-friendly than the first machine code or second-generation assembly languages, with a less specific focus on the fourth and fifth generations. 3GLs are substantially more machine-independent and programmer-friendly than 2GLs. This incorporates aspects such as better support for aggregate data types and the ability to express notions in a way that benefits the developer rather than the computer. Non-essential aspects are handled by the system in third-generation languages.
Learn more about modern programming languages here:brainly.com/question/26660343
#SPJ4
what is the full path and filename of the grub 2 file that is used for editing the default behavior of the bootloader menu?
The full path and filename of the grub 2 file that is used for editing the default behavior of the bootloader menu is etc/default/grub. The main configuration file to change menu display settings is known as grub and is located in the etc/default/grub.
The latest version of GNU GRUB is known as GRUB2. A bootloader has function as software to run when a computer starts. GRUB2 has main function to load and transfer control to the operating system kernel. The kernel is called Linux, in Fedora. GRUB2 regonize the similar boot functionality as GRUB1 but GRUB2 is also a mainframe-like command-based pre-OS environment and lets more flexibility during the pre-boot phase.
Learn more about grub 2 here, https://brainly.com/question/6845047
#SPJ4
write a(n) e-mail message when you need a formal or written, formatted record of your internal communication.
E-mail :
Subject: Formal Internal Communication
To: [Recipient Name]
From: [Your Name]
Date: [Today's Date]
Dear [Recipient Name],
This message serves as a formal record of our internal communication. [Provide a brief description of the communication].
[Include any relevant details or information].
If you have any questions or concerns, please do not hesitate to contact me.
Sincerely,
[Your Name]
How does one communicate?
The transfer of information is the standard definition of the word communication. A message is transmitted in this case from a transmitter to a recipient utilizing a medium, such as voice, paper, physical movement, or electricity. The word "communication" can alternatively, in a different meaning, refer solely to the data that is being transmitted or to the area of research that looks into such transmissions.
To know more about communication
https://brainly.com/question/22558440
#SPJ4
The value placed within square brackets after an array name is _______________________.a. a subscriptb. an indexc. always an integerd. all of these
Answer: all of these
Explanation:
The open source movement makes _____ available to everyone in an effort to continue to build and improve the functionality of open source software.
Answer: the source code
Explanation:
WILL GIVE BRAINLIEST IF RIGHT Which of these is a NOT function in Python?
input
variable
print
round
The input function is not a NOT function in Python. The input function is a built-in function in Python that is used to read input from the user.
What are built-in functions?A built-in function is a function that is included in the core programming language, and that is available to the programmer without any additional installation or setup.
Built-in functions are typically provided by the language's standard library, and they are designed to perform common or fundamental operations. For example, in the Python programming language, some built-in functions include print, len, abs, max, and min.
These functions are available to the programmer by default, and they can be called directly from within the code.
Built-in functions can be very useful, as they provide a standard set of tools that are available in any Python environment, and they can save the programmer time and effort by providing common operations that are already implemented and tested.
To Know More About Python, Check Out
https://brainly.com/question/11288191
#SPJ1
the enp2s0 network interface has already been assigned the ip configuration 172.16.1.123/16. which command would you use to temporarily configure a second ip address of 192.168.0.123/24 for this network interface?
Individual network device software interfaces are managed by interface configuration (ifcfg) files.
In a specific ifcfg file, only one of the following directives should be used: DHCP HOSTNAME or DHCP FQDN. Only the latter is used if DHCP FQDN and DHCP HOSTNAME are both supplied. These files are used by the system at boot to decide which interfaces to start up and how to configure them. These files are typically identified by the term ifcfg-name, where name is the name of the device that the configuration file governs. By convention, the DEVICE directive's string value in the configuration file's own DEVICE directive serves as the suffix for the ifcfg file.
DEVICE=enp1s0\sBOOTPROTO=none
ONBOOT=yes \sPREFIX=24 \sIPADDR=10.0.1.27
Learn more about configuration here-
https://brainly.com/question/14871898
#SPJ4
TRUE/FALSE as with other programming languages, improper structure, syntax, or systems testing can cause scripts to negatively impact a machine.
Answer: false
Explanation:
b. you are the chief security administrator in your enterprise. you are asked to train every employee, from top-level officers to front gate security officers, to make them aware of various security risks. which training technique should you use?
Gamification.
Using gamification techniques, a boring task can become a fun challenge. Games are a great way to motivate employees because they will focus their attention and actively participate in the activity. Use incentives and techniques for positive reinforcement to at the very least make sure your cybersecurity objective is accomplished. Gamification in the training program will motivate the participants to pay attention. Another definition of true gamification is a system of rewards that constructively reinforces learning.
What is Gamification?
Gamification is the use of game-design elements and game principles in situations that are not game-related. It can also be described as a collection of methods and procedures for resolving issues by utilizing or putting to use game mechanics.
To know more about cybersecurity, check out:
https://brainly.com/question/17367986
#SPJ1
how is the channelized t-1 rate of 1.544 mbps determined? a. 64 frames/second * ((24 ds0s/frame * 8 bits/ds0) * 1 fb) b. 8000 frames/second * ((24 bits/frame) 1 fb) c. 8000 frames/second * ((24 ds0s/frame * 8 bits/ds0) 1 fb) d. 64 frames/second * ((193 bits/frame * 8 bits/ds0) 1 fb)
The channelized T-1 rate of 1.544 Mbps is determined by 64 frames/second ((193 bits/frame 8 bits/DS0) + 1 FB).
What is a channelized T-1 rate?A channelized T-1 supports 24 DS0s; however, a T-1 frame only supports one byte of each DS0 supported. It is to be noted that the T-1 frame rate must be 8000 frames per second and it's frame length is 193 bits long.
A T1 line is a 1.544 Mbps synchronous digital transmission with certain signal characteristics. It is broken into 193 bits frames of 192 data bits + 1 framing bit. These frames occur at a rate of 8,000 per second. This equates to 1.536 Megabits per second.
Unchannelized T1 is a very new development. When T1, or Trunk Level 1, was introduced in the 1950s, it was intended to transport telephone traffic. Because each call is individual, the T1 frame was broken into 24 channels of 8 bits each.
Running at 8 Kbps, each channel has a capacity of 64 Kbps, which is sufficient for one toll-quality phone call. Using a T1 line in this manner is known as "Channelized T1."
Channelized T1 is still widely used today to connect several phone lines to a PBX system. It can replace up to 24 individual pairs of telephone cables. A single T1 line that combines all of those phone lines into a single four-wire connection is frequently significantly less expensive than operating them all individually.
Learn more about channelized T-1:
https://brainly.com/question/16699261?
#SPJ1
how would you deploy network connectivity in the 25 classrooms, 12 faculty offices, and the common areas of the building?
The number of ways to deploy network connectivity in the 25 classrooms, 12 faculty offices and a common area is 5200300 ways
How to distribute network connectivity?We should know that permutation relates to the act of arranging all the members of a set into some sequence or order
The given parameters are
25 classrooms
12 faculty offices and 1 common area
⇒ n[tex]_{P_{r} }[/tex]
= [tex]\frac{25!}{(25-12)!13!}[/tex]
= [tex]\frac{25*24*23*22*21*20*19*18*17*16*15*14}{y13*11*10*9*8*7*6*5*4*3*2*1}[/tex]
Simplifying the expression we have
5200300 ways
Therefore, the network connectivity can be done in 5200300 ways
Read more about permutation and combination on https://brainly.com/question/1216161
#SPJ1
the user hansen7o9 has tried multiple times to access her account but was using the wrong password. she thinks the system has now locked her out. assuming your system employs pam for authentication, which of the following utilities can you use to see if her account was locked out due to failed login attempts?
The utilities that can be used to see if her account was locked out due to failed login attempts are fail lock and pam_tally2. The correct options are A and C.
What is pam tally2 or fail lock utilities?The pam tally2 or faillock utilities, depending on how Pluggable Authentication Modules (PAMs) are used in your system, will enable you to determine whether the user was locked out of the system as a result of unsuccessful login attempts.
Option D is inadmissible. Instead of PAM, the ausearch command is used with AppArmor. B and E are wrong answers. Instead of PAM, SELinux uses the sealert and id -Z commands.
Therefore, the correct options are A. faillock, and C. pam_tally2.
To learn more about fail lock utilities, refer to the link:
https://brainly.com/question/28739318
#SPJ1
The question is incomplete. Your most probably complete question is given below:
Each correct answer represents a complete solution. Choose all that apply.
A. faillock
B. sealert
C. pam_tally2
D. ausearch
E. id -Z
Scannable résumés are: a. written by hand and then scanned b. typed on a typewriter c. created in a word-processing program d. recorded using voice scanning technology please select the best answer from the choices provided a b c d
Resumes that can be scanned are: b. Typed on a typewriter.
What is Scannable resume?In order to compile resume data into a database, a resume must be able to be optically searched by a computer reader when it is in hard copy form. When firms scanned paper papers for employment information for recruiting purposes, these forms of resumes became common.
Once an employer obtains your scannable resume, computer software pulls a summary of data needed from it, comprising components like your name, contact information, skills, work history, years of experience, and education.
How a Scannable resume is used by recruiter?Before a recruiter or HR professional uses a keyword search to find applicants who meet the specifications of a job posting, scanned resumes and their extracted summaries go to sleep soundly. The technique assigns a ranking to candidates, from the best to the worst. After receiving a wake-up call, the pertinent resumes appear on the recruiting screen, where human eyes take over the hiring process.
Standard fonts and crisp, dark type similar to what a laser printer or typewriter with a new ribbon would generate are used in scannable resumes.
(That is not done to impress a boss; rather, it is done to allow the computer to scan the lettering.)
B is the right response as a result.
To know more about scannable resume visit:
https://brainly.com/question/1383483
#SPJ4
true or false: hayao miyazaki's film spirited away is impressive because it uses computer-generated imagery or cgi instead of cel animation.
Computer-generated imagery, or CGI for short, is a word used to describe digitally produced pictures in movies and television.
What Is Computer-Generated Imagery?Computer-generated imagery, or CGI for short, is a word used to describe digitally produced pictures in movies and television. CGI is a subset of visual effects (VFX), which are images that are created or altered by filmmakers and do not actually exist in the real world being filmed or recorded. CGI plays a crucial role in the production of movies and television shows, and it is the main technique used to produce 3D computer graphics for video games.CGI is now a standard feature in everything from low-budget comedy to box office successes thanks to technological advancements. For their innovative usage of CGI, these three movies stand out in particular:Steven Spielberg's Jurassic Park (1993): The arrival of Steven Spielberg's Jurassic Park marked a significant turning point for computer-generated imagery. Numerous critical shots of the dinosaurs—particularly the tyrannosaurus and the velociraptors—in this movie were entirely created using computer graphics. They frightened and astounded people all across the world with their realistic movements, skin texture, and size.To Learn more About Computer-generated imagery, refer to:
https://brainly.com/question/11429665
#SPJ4
which network modes can typically be used for both 2.4 ghz and 5 ghz clients? (select two.) answer 802.11n only 802.11b only 802.11g only 802-11a only 802.11ax only
Your wired devices are linked to a wireless network via the access point while it is in client mode. This mode is appropriate if you want to wirelessly connect a wired device, such as a smart TV, media player, or gaming console, that has an Ethernet port but no wireless functionality.
What network modes for both 2.4 GHz and 5 GHz clients?You can use a wireless LAN access point to connect to a smartphone using this device. Your smartphone can connect to THETA V as you browse the web, saving you the trouble of always having to reconnect to the wireless network.
Therefore, 802.11n, which was adopted in October 2009 and allows for usage in two frequencies, 2.4GHz and 5GHz, with speeds of up to 600Mbps, is the first standard to specify MIMO.
Learn more about network modes here:
https://brainly.com/question/16968501
#SPJ1
if chooseactivity is a javascript promise object that returns a string value, which code should you use to initiate this promise?
if chooseactivity is a JavaScript promise object that returns a string value, the code you should use to initiate this promise is:
chooseActivity
.then(choiceMsɡ => console.log(choiceMsɡ))
.then(choiceMsɡ => console.log(choiceMsɡ));
What is JavaScript?When building websites, applications, servers, and even video games, web developers frequently use the lightweight programming language JavaScript to create more dynamic interactions.
Along with HTML and CSS, developers typically use JavaScript. In order to format HTML elements, the scripting language works well with CSS. User interaction is still maintained by JavaScript despite CSS's inability to do so.
It is worthwhile to learn JavaScript because it is used in the creation of websites, mobile applications, and video games. You can do this by using educational websites like BitDegree or by investigating free JavaScript applications and templates on websites that host source code, like GitHub.
Learn more about JavaScript
https://brainly.com/question/16698901
#SPJ4
Use bubblesort to arrange the numbers 76, 51, 66, 38, 41 and 18 into ascending order. Write the list after each exchange of numbers. How many comparisons are there altogether?.
Below is the complete step wise solution of the arrangement given for the asked bubblesort.
Step-by-step explanation:
Bubble sort Original list is [76, 51, 66, 38, 41, 18] Iteration: 1
> Swap 76 and 51, since they are not in correct order. Now, the list becomes [51, 76, 66, 38, 41, 18]
> Swap 76 and 66, since they are not in correct order. Now, the list becomes [51, 66, 76, 38, 41, 18]
> Swap 76 and 38, since they are not in correct order. Now, the list becomes [51, 66, 38, 76, 41, 18]
> Swap 76 and 41, since they are not in correct order. Now, the list becomes [51, 66, 38, 41, 76, 18]
> Swap 76 and 18, since they are not in correct order. Now, the list becomes [51, 66, 38, 41, 18, 76]
> 5 swaps happened in this iteration
> List after iteration 1 is [51, 66, 38, 41, 18, 76] Iteration: 2
> Swap 66 and 38, since they are not in correct order. Now, the list becomes [51, 38, 66, 41, 18, 76]
> Swap 66 and 41, since they are not in correct order. Now, the list becomes [51, 38, 41, 66, 18, 76]
> Swap 66 and 18, since they are not in correct order. Now, the list becomes [51, 38, 41, 18, 66, 76]
> 3 swaps happened in this iteration
> List after iteration 2 is [51, 38, 41, 18, 66, 76] Iteration: 3
> Swap 51 and 38, since they are not in correct order. Now, the list becomes [38, 51, 41, 18, 66, 76]
> Swap 51 and 41, since they are not in correct order. Now, the list becomes [38, 41, 51, 18, 66, 76]
> Swap 51 and 18, since they are not in correct order. Now, the list becomes [38, 41, 18, 51, 66, 76]
> 3 swaps happened in this iteration
> List after iteration 3 is [38, 41, 18, 51, 66, 76] Iteration: 4
> Swap 41 and 18, since they are not in correct order. Now, the list becomes [38, 18, 41, 51, 66, 76]
> 1 swaps happened in this iteration
> List after iteration 4 is [38, 18, 41, 51, 66, 76] Iteration: 5
> Swap 38 and 18, since they are not in correct order. Now, the list becomes [18, 38, 41, 51, 66, 76]
> 1 swaps happened in this iteration
> List after iteration 5 is [18, 38, 41, 51, 66, 76] Iteration: 6
> 0 swaps happened in this iteration
> List after iteration 6 is [18, 38, 41, 51, 66, 76] Sorted list is [18, 38, 41, 51, 66, 76] total number of comparisons made = 5+4+3+2+1 = 15
To learn more about Bubblesort, visit: https://brainly.com/question/29325734
#SPJ4
here is the wacc function for u.s drug company merck. the wacc calculation has been hidden. what is the wacc
The WACC is 8.1%
What Is Weighted Average Cost of Capital (WACC)?A firm's cost of capital is represented by its weighted average cost of capital (WACC), which assigns a proportional weight to each category of capital.WACC is frequently used as a benchmark rate by businesses and investors to determine the viability of a certain project or purchase.When calculating WACC, the cost of each capital source (debt and equity) is multiplied by the relevant weight by market value, and the results are added up to reach the final result.In discounted cash flow analysis, WACC is sometimes applied as the discount rate for future cash flows.Analysts, investors, and firm management can all benefit from WACC and its formula; each uses it for a different reason. Finding a company's cost of capital is important in corporate finance for a few reasons.WACC = Weight of debt*after tax cost of debt + weight of equity*cost of equity + weight of preferred stock*cost of preferred stock
WACC = 0.888*0.089 + 0.112*0.019 + 0*0
WACC = 0.079032 + 0.002128 + 0
WACC = 0.081 or 8.1%
To learn more about WACC, refer to
https://brainly.com/question/25566972
#SPJ4
What is a major benefit of working with a ready-to-use cloud-based artificial intelligence (ai) vendor service?
1) dedicated infrastructure
2) increased security
3) decreased barrier to entry
4) decreased computing power
The correct option is 4) decreased computing power. Working with a ready-to-use Artificial Intelligence (AI) vendor service in the cloud has many advantages.
The ability of artificial intelligence algorithms to quickly uncover meaningful and practical insights while processing vast amounts of data is one of the most important advantages of using cloud-based AI. Instead of putting employees on show during customer meetings, it will enable AI chatbots to handle those situations.
Thus, employees will have more time to complete administrative and data gathering chores. As a result, employees will have more time for direct client interaction.
Cloud-hosted or containerised services/models, also known as cloud AI developer services, allow development teams and business users to use artificial intelligence (AI) models via APIs, software development kits (SDKs), or applications without needing extensive data science knowledge, according to research firm Gartner. When cloud computing and AI are combined, it encourages the creation of agile solutions, ensuring process effectiveness and lowering mistake rates—both essential components for prompt and decisive services that satisfy the needs of both enterprises and customers.
To learn more about Artificial Intelligence (AI) click here:
brainly.com/question/25573277
#SPJ4
write a for-each loop that prints all elements in a collection of student objects called role. what is required for that loop to work?
A for-each loop is a loop that is only applicable to a group of objects. It will repeatedly loop through the collection, using the subsequent item from the collection each time.
What is the forEach loop ?A for-each loop is a loop that can only be applied to a set of items. It will loop through the collection, using the next item in the collection each time it does so. It begins with the first item in the array and progresses to the last item in the array.Like any other for-loop, it begins with the keyword for.Instead of declaring and initialising a loop counter variable, you declare a variable of the same type as the array's base type, followed by a colon, and then the array name.You can use the loop variable you created instead of an indexed array element in the loop body.class For_Each
{
public static void main(String[] arg)
{
{
int[] marks = { 125, 132, 95, 116, 110 };
int highest_marks = maximum(marks);
System.out.println("The highest score is " + highest_marks);
}
}
public static int maximum(int[] numbers)
{
int maxSoFar = numbers[0];
for (int num : numbers)
{
if (num > maxSoFar)
{
maxSoFar = num;
}
}
return maxSoFar;
}
}
To learn more about for-each loop refer :
https://brainly.com/question/13105126
#SPJ4
______ are the most secure type of backbone because they enable ACL and other security measures to be applied at the switch level
The ability to apply ACL and other security controls at the switch level makes VLAN the most secure type of backbone.
What is a backbone architecture?The backbone architecture describes how the backbone connects the networks that are connected to it and controls how packets from one network go across the backbone to other networks.The backbone component known as the distribution layer that links the LANs together. The core layer joins many backbone networks, frequently between structures.Because each segment of the network connected to the backbone has its own subnet addresses that can be managed individually, a routed backbone provides the main benefit of clearly segmenting each component of the network connected to it.To learn more about Backbone architecture refer to:
https://brainly.com/question/13944451
#SPJ4
Write a program that prints out the numbers in the Fibonacci sequence up until the max number. You can figure out the next number in the Fibonacci sequence by adding the two previous numbers.
The first number is 1 and the second number is 1. To get the third number we take 1 + 1 = 2. To get the fourth number we take the second number plus the third number (1 + 2 = 3).
The program that prints the numbers in the Fibonacci sequence is given as follows:
int main(){
int second_prev = 0;
int prev = 1;
int max;
int i;
int term;
scanf("%d\n", &max);
printf("%d\n%d\n", second_prev, prev);
for(i = 1; i < max; i++){
term = second_prev+prev;
printf("%d\n", term);
second_prev = prev;
prev = term;
}
return 0;
}
What are the steps to build the program?The first step in building the program is identifying the variables of the program, which are given as follows:
int second_prev = 0; -> stores second previous number, stats at zero, it is a convention of the sequence.int prev = 1; -> stores the previous number.int max; -> number of terms in the sequence.int i; -> counter.int term; -> term of the sequence.Then the command to read the max number is given as follows:
scanf("%d\n", &max);
Then the for loop is used to calculate the terms until desired, and the outputs are printed using the printf() command.
More can be learned about the Fibonacci sequence at brainly.com/question/3324724
#SPJ1
A company hosts a web application on an Amazon EC2 instance in a production VPC. Client connections to the application are failing. A SysOps administrator inspects the VPC flow logs and finds the following entry:
2 111122223333 eni-<###> 192.0.2.15 203.0.113.56 40711 443 6 1 40 1418530010 1418530070 REJECT OK
What is a possible cause of these failed connections?
A. A security group is denying traffic on port 443.
B. The EC2 instance is shut down.
C. The network ACL is blocking HTTPS traffic.
D. The VPC has no internet gateway attached.
The network ACL is blocking HTTPS traffic. And gathering broad information.
For usage details and additional information regarding the aforementioned commands, if necessary, see the operating system man pages and the IDS documentation. Execute the following commands, then gather the results: Run ps -elf several times for the client process on UNIX if it's still active. Run the client process's truss/trace on UNIX (if it's available). For some connections, a connection requires the use of a third-party API. Nothing more is necessary if the complete API has already been compiled in the connector. To use a map or process with some APIs, you must first install a client on the integration platform and connect to a server (usually a SQL engine) so that the connection can be made.
Learn more about information here-
https://brainly.com/question/15709585
#SPJ4
it 342 hw 11 (100 pts each) describe how a page fault is handled? what are file attributes? what operations can be performed on files and directories? why are some distinct? compare and contrast sequential to direct access. how is a tree-structured directory different from a acyclic-graph directory?
In the Operating System, once the virtual address that produced the Page Fault is determined, it verifies that the address is genuine and makes sure there are no issues with protection or access.
The system checks to verify if a page frame is free if the virtual address is legitimate. The page replacement algorithm is used to remove a page if there are no empty frames.
Every file and directory has information called file attributes that contain additional details about the file or its contents. Like an On or Off state, they can only be in one of two states: Set or Cleared. Files, folders, volumes, and specific system objects can include attributes.
Various operations that can be performed on Files are Creating, Writing, Reading, Repositioning, Deleting and Truncating.The actions that can be taken on directories include searching, creating, deleting, listing, renaming, link and unlink.
Some operations are different for files and directories because of the way information are stored in them. The management of data on the disc is the responsibility of the file system. Files contain information, which are kept in directories (folders). A directory tree is created when directories store additional directories. The root directory of the entire filesystem is just /.
Access to each element must be made sequentially, starting at the beginning and going through each one one at a time. Any element may be directly accessed by using its index number or address to find it. There is direct access with arrays. CDs had direct access in the tree structured directories.
In a tree-structured directory, a directory's subdirectories or files may exist. Directories can be added or removed using specific system calls.
Sharing of directories or files is not permitted in a tree structure. Directories can exchange files and subdirectories on an acyclic graph, which lacks cycles.
To learn more about Page Fault click here:
brainly.com/question/29506246
#SPJ4
Consider the OSPF routing protocol. Which of the following characteristics are associated with OSPF (as opposed to BGP)? O Finds a least cost path from source to destination. O Policy, rather than performance (e.g., least cost path), determines paths that used O Is an intra-domain routing protocol O Is an inter-domain routing protocol O Floods link state control information
Based on the OSPF routing protocol, the characteristics that are associated with OSPF (as opposed to BGP) include the following;
A. Finds a least cost path from source to destination.
C. Is an intra-domain routing protocol.
D. Floods link state control information.
What is RIP?In Computer technology, RIP is an abbreviation for Routing Information Protocol and it can be defined as an intra-domain routing protocol which is typically designed and developed based on distance vector routing.
What is OSPF?In Computer networking, OSPF is an abbreviation for Open Shortest Path First and it can be defined as an intra-domain routing protocol that is typically designed and developed to always find a least cost path between a source and destination.
Read more on routing protocol here: https://brainly.com/question/14446415
#SPJ1