Which states of matter change shape when moved? Which states of matter change shape when moved?

Answer: Calcium ion Ca² : 1 s² 2s² 2p ^6 (sorry I don't get 6 similar way as 2) 3s² 3p^6

Also 18 electrons, because Calcium donates two 4s electrons

Explanation:

Answer:

D

Explanation:

When an atom loses an electron the number of electrons exceeds the number of protons. This means that the negative charge induced by the electrons exceeds the positive charge induced by the protons.

Answer and Explanation:

Dado que la capa de ozono protege la vida en la Tierra actuando como filtro de radiaciones nocivas del Sol, su destrucción trae como consecuencia un aumento de la radiacion UV que puede provocar:

- daños en animales y en el hombre: aumento de casos de cáncer de piel, cataratas en ojos, debilitamiento del sistema inmune.

- alteración en el desarrollo de especies vegetales .

- contribución al efecto invernadero y al calentamiento global.

Para revertir el deterioro de la capa de ozono, podemos tomar algunas medidas:

- no utilizar productos que contengan clorofluorocarbonos (CFC), como por ejemplo algunos aerosoles.

- evitar el uso de productos que contengan halones

- evitar el uso de hidrofluorcarbonos (HFCF)

Estos compuestos químicos reaccionan y destruyen el ozono, por lo que si evitamos utilizarlos, con el tiempo la capa de ozono se recuperará.

Answer:

yes you do so you know how strong it is how maluble it's is so it can be customised to it's specific use

Answer:

alloy's properties are usually different from those of its component elements. Alloy constituents are usually measured by mass. Unlike pure metals, most alloys do not have a single melting point; rather, they have a melting range in which the substance is a mixture of solid and liquid.

Alloy steels have a wide range of special properties, such as hardness, toughness, corrosion resistance, magnetizability, and ductility. Nonferrous alloys, mainly copper–nickel, bronze, and aluminum alloys, are much used in coinage.

Pure metals are useful but their applications are often limited to each individual metal's properties. Alloys allow metal mixtures that have increased resistance to oxidation, increased strength, conductivity, and melting point; Essentially any property can be manipulated by adjusting alloy concentrations.

dnt learn all thr properties.

these are the main properties..u can learn thse only. hope it will help u

Answer:

There are 0.16 g of sulphur in 3.0 × 10²¹ atoms.

Explanation:

One mole of a substance contains 6.02 × 10²³ particles

One mole of sulphur atom contains 6.02 × 10²³ atoms

Number of moles of sulphur present in 3.0 × 10²¹ atoms = 3.0 ×10²¹/6.02 10²³

Number of moles of sulphur atom = 0.00498 moles of sulphur atom

The mole of a substance is related to its mass by a quantity known as molar mass which is defined as the mass of one mole of that substance.

Molar mass of sulphur atom = 32 grams per mole (g/mol)

Mass of 0.00498 moles of sulphur atom = 0.00498 moles × 32 g/mol

Mass of sulphur = 0.16 g

Therefore, there are 0.16 g of sulphur in 3.0 × 10²¹ atoms.

I think the answer is: C. An endothermic reaction that decreases in entropy

An endothermic reaction that decreases in entropy. Hence, option C is correct.

Entropy is the energy of a system that is unuseful to do work.

For a reaction to be spontaneous, the Gibbs' Free Energy must be negative.

The equation for Gibbs Free energy is given by:

G= H-TS

Where, G = Gibbs free energy

H = Enthalpy of the reaction

T = Temperature of the system

S = Entropy of the system

Sign convention for all the quantities:

For H: It is negative for exothermic reactions and positive for endothermic reactions

For S:  It is positive when there is an increase in entropy and it is negative when there is a decrease in entropy.

If we want G to be negative, the conditions necessary are:

G= (-ve) - (+ve) = -ve

The product of temperature and entropy must be positive and that will be positive when there is increase in entropy at any temperature.

Hence, option C is correct.

Learn more about enthalpy and entropy, here:

brainly.com/question/8916312

#SPJ5

Answer:

Natural phenomena such as melting glaciers is due to the rise in temperature. This will result to extinction of flora and fauna. Moreover it can cause extreme flooding due to rise in water level in other water bodies such as rivers, lakes

Molality = moles of solute/mass (in kg) of solvent

The solute here is NaCl, of which you have 40 g or 40/58.4428 = 0.6844 moles NaCl.

The solvent here is water, of which you have 1500 g or 1.500 kg H2O.

The molality of the resulting solution would thus be 0.6844 moles NaCl/1.500 kg H2O = 0.4562 mol/kg.

If you have to consider sig figs, then your final answer would have one sig fig (40 g has one sig fig). In that case, your final answer would be 0.5 mol/kg.

Answer:

5 mole of N2O : 112 litre of N2O

5 mole of N2O : 220 g of N2O

Then,

Density = mass/ volume

= 220/112

= 1.96 g per litre

Answer:

the answer is c I believe

Answer:

HCI - BASE

KOH - ACID

H2SO4 - ACID

H30 + :- BASE

NAOH - ACID

Explanation:

Chemical fertilizers raise crop yields, but their heavy usage has hardened the soil, diminished fertility, reinforced pesticides, contaminated air and water, and emitted greenhouse gases, posing health and environmental risks.

Answer: The answer is C

covalent bonds have a lower melting and boiling point

HOPE THIS HELPS !! IF YOU NEED MORE HELP FEEL FREE TO COMMENT IN THE COMMENT SECTION

Answer:

1. B. Ammonia and hexane will not dissolve because one molecule is polar and the other is non polar.

2. 1400 mL

Explanation:

In chemistry, like dissolve like! Ammonia is a polar molecule having a significant dipole moment owing to its three N-H bonds. On the other hand, hexane is a purely non-polar hydrocarbon hence the two substances can never dissolve in each other.

From the dilution formula;

C1V1=C2V2

C1= Initial concentration of the solution

V1 = Initial volume of the solution

C2 = Final concentration of the solution

V2= Final volume of the solution

2.8 M * 750.0 mL = 1.5 M * V2

V2 = 2.8 M * 750.0 mL/1.5 M

V2 = 1400 mL

Answer:

Gases, liquids and solids are all made up of atoms, molecules, and/or ions, but the behaviors of these particles differ in the three phases. ... gas are well separated with no regular arrangement. liquid are close together with no regular arrangement. solid are tightly packed, usually in a regular pattern.

Answer: B

Explanation: sorry if I'm too late but i just did this question and that was the right answer

Answer:

Rhodium-122 < Palladium-109 < Silver-109  <  Cadmium-106 < Indium-110

Explanation:

Atomic number - Number of protons.

The number displayed at the end of the element in this question represents the mass number (Number of protons + Number of neutrons).

The atomic number of the isotopes are given below;

Silver-109  --> 47

Cadmium-106  --> 48

Rhodium-122   --> 45

Indium-110   --> 49

Palladium-109  --> 46

Arranging in order of increasing atomic number from lowest to highest;

Rhodium-122 < Palladium-109 < Silver-109  <  Cadmium-106 < Indium-110

Answer and Explanation:

Dipole-Dipole interactions are weaker than hydrogen bonds.

Hydrogen bonds are a form of dipole-dipole interactions, being the strongest form of dipole-dipole interactions.

#teamtrees #PAW (Plant And Water)

Answer:

Explanation:

It's 21 /

Answer:

47.27 g HNO₃

Explanation:

The reaction between nitric acid (HNO₃) and calcium hydroxide (Ca(OH)₂) is the following:

2HNO₃(aq) + Ca(OH)₂(aq) → Ca(NO₃)₂ + 2H₂O(l)

According to the chemical equation, 2 moles of HNO₃ reacts with 1 mol of Ca(OH)₂. At the point of total neutralization, the total number of moles of  HNO₃ reacts with the total number of moles of Ca(OH)₂:

2 x moles HNO₃ = moles Ca(OH)₂

The number of moles is equal to the product of molarity of the solution (M) and the volume in liters (V):

M(HNO₃) = ?

M(Ca(OH)₂) = 0.73 M

V(HNO₃) = 25.00 mL x 1 L/1000 mL = 0.025 L

V(Ca(OH)₂) = 51.4 mL x 1 L/1000 mL = 0.0514 L

So, we can write the equation at neutralization point as:

2 x (M(HNO₃) x V(HNO₃)) = M(Ca(OH)₂) x V(Ca(OH)₂)

From this, we can calculate the molarity of HNO₃:

M(HNO₃) = (M(Ca(OH)₂) x V(Ca(OH)₂))/2 x V(HNO₃)

               = (0.73 M x 0.0514 L)/(2 x 0.025 L)

               = 0.75 M HNO₃

We can convert the molarity from M (mol/L) to g/L by using the molecular weight of HNO₃:

Mw(HNO₃) = 1 g/mol H + 14 g/mol N + (3 x 16 g/mol O) = 63 g/mol

Finally, we multiply the molarity by the molecular weight to obtain the grams of nitric acid per liter of solution:

0.75 mol/L HNO₃ x 63 g/mol = 47.27 g HNO₃

Answer:

Temporary hardness is a type of water hardness caused by the presence of dissolved bicarbonate minerals (calcium bicarbonate and magnesium bicarbonate). ... However, unlike the permanent hardness caused by sulfate and chloride compounds, this "temporary" hardness can be reduced by boiling the water.

Answer:

Granite

Explanation:

Answer:

Granite

Explanation:

Igneous forms when rock is cooled and hardens by Magma.

And the option granite, which forms as magma cools deep underground

Hope it helps have a Good Day

Answer:

3, 2

Explanation:

Balanced equation:

N2 + 3 H2 = 2 NH3

Answer:

a) 226.6 grams of Cl₂

b) 19.2 grams of C

c) 303.2 grams of TiCl₄ and 70.4 grams of CO₂

Explanation:

The balanced chemical reaction is the following:

TiO₂(s) + C(s) + 2 Cl₂(g) → TiCl₄(s) + CO₂(g)

(a) What mass of Cl₂ gas is needed to react with 1.60 mol TiO₂?

From the chemical equation, 1 mol of TiO₂ reacts with 2 moles of Cl₂. So, the stoichiometric ratio is 2 mol Cl₂/1 mol TiO₂. We multiply this ratio by the moles of TiO₂ we have to calculate the moles of Cl₂ we need:

1.60 mol TiO₂ x 2 mol Cl₂/1 mol TiO₂ = 3.2 mol Cl₂

Now, we convert from moles to mass by using the molecular weight (MW) of Cl₂:

MW(Cl₂) = 35.4 g/mol x 2 = 70.8 g/mol

mass of Cl₂= 3.2 mol x 70.8 g/mol = 226.6 g

Therefore, 226.6 grams of Cl₂ are needed to react with 1.6 mol of TiO₂.

(b) What mass of C is needed to react with 1.60 mol of TiO₂?

From the chemical equation, 1 mol of TiO₂ reacts with 1 moles of C(s). So, the stoichiometric ratio is 1 mol C/1 mol TiO₂. We multiply this ratio by the moles of TiO₂ we have to calculate the moles of C(s) we need:

1.60 mol TiO₂ x 1 mol C(s)/1 mol TiO₂ = 1.60 mol C(s)

So, we convert the moles of C(s) to grams as follows:

MW(C) = 12 g/mol

1.60 mol x 12 g/mol = 19.2 g C(s)

Therefore, a mass of 19.2 grams of C is needed to react with 1.60 mol of TiO₂.

(c) What is the mass of all the products formed by reaction with 1.60 mol of TiO₂?

From the chemical equation, we can notice that 1 mol of TiO₂ produces 1 mol of TiCl₄ and 1 mol of CO₂. So, from 1.60 moles of TiO₂, 1 mol of each product will be produced:

1 mol TiO₂/1 mol TiCl₄ ⇒ 1.60 mol TiO₂/1.60 mol TiCl₄

1 mol TiO₂/1 mol CO₂ ⇒ 1.60 mol TiO₂/1.60 mol CO₂

Finally, we convert the moles to grams by using the molecular weight of each compound:

MW(TiCl₄) = 47.9 g/mol Ti + (35.4 g/mol x 4 Cl) = 189.5 g/mol

1.60 mol x 189.5 g/mol = 303.2 g

MW(CO₂) = 12 g/mol C + (16 g/mol x 2 O) = 44 g/mol

1.60 mol x 44 g/mol = 70.4 g

Therefore, from the reaction of 1.60 mol of TiO₂ are formed 303.2 grams of TiCl₄ and 70.4 grams of CO₂.

Answer:

Explanation:  A conversion factor is a number used to change one set of units to another, by multiplying or dividing. When a conversion is necessary, the appropriate conversion factor to an equal value must be used. For example, to convert inches to feet, the appropriate conversion value is 12 inches equal 1 foot.

Answer:

jjjjajwhejwhswjiwiwvssvwvow9qiwgdvdbslw

Answer:

The volume of solution in liters required to make a 0.250 M solution from 3.52 moles of solute is 14.08 liters of solution

Explanation:

The question relates to the definition of the concentration of a solution which is the number of moles per liter (1 liter = 1 dm³) of solution

Therefore we have;

The concentration of the intended solution = 0.250 M

Therefore, the number of moles per liter of the required resolution = 0.250 moles

Therefore, the concentration of the required solution = 0.250 moles/liter

The volume in liters of the required solution that will have 3.52 moles of the solute is given as follows;

The required volume of solution = The number of moles of the solute/(The concentration of the solution)

∴ The required volume of solution = 3.52 moles/(0.250 moles/liter) = 14.08 liters

The required volume of solution to make a 0.250 M solution from 3.52 moles of solute = 14.08 liters.

Therefore the number of liters required to make a 0.250 M solution from 3.52 moles of solute = 14.08 liters.

Answer:

Ture

Explanation:

Ture

True

True

True