Which statement is correct about the rate of chemical reactions? (5 points) It increases when the temperature decreases. It increases when a catalyst is added. It does not depend on the temperature. It does not depend on the presence of catalysts.

Answer:

53676 J

Explanation:

m = 355 g

c = 2.4 J/gºC

ΔT = 63°C

q = mcΔT

  = (355)(2.4)(63)

  = 53676 J

The amount of heat is 53676J to raise the temperature of 355 g of ethanol.

Temperature is a measurement of the amount of energy of the atoms in a system or a physical quantity that expresses hot and cold.

Heat is energy that is transmitted through one body to some other due to a temperature differential. When two bodies of different temperatures come together, energy can be transferred (heat flows) from the hotter to the colder.

It can be determined by the formula:

q =mCΔT.

where, q is heat, m is mass , C is and T is temperature.

Calculation of heat is shown below:

It is given that, mass of ethanol = 355 g, c = [tex]2.4 J/g^{0}[/tex] C, ΔT. = [tex]63^{0} C[/tex]

Now, put the values of given data in heat formula:

q =mCΔT

= 355×2.4×63

=53676J.

Therefore, the amount of heat will be 53676J to raise the temperature of 355 g of ethanol

To know more about heat and temperature click here.

https://brainly.com/question/1429452.

#SPJ2

endothermic

Explanation:

I believe it's an endothermic but I'm not all too sure

Answer:

Pottasium nitrate is highly exothermic!However the dissolution of sodium nitrate in water is endothermic. Heat is absorbed during process.

Answer:

The cation is written first in the name; the anion is written second in the name. Rule 2. When the formula unit contains two or more of the same polyatomic ion, that ion is written in parentheses with the subscript written outside the parentheses.

When writing the formula of a compound that contains polyatomic ion, the metal is written first followed by the central atom in the ion and then other atoms that surround the central atom.

A poly atomic ion refers to an ion that comprises of more than one atom. Such ions are common in chemistry. Examples of polyatomic ions include; PO4^3-, BH4^- etc.

When writing the formula of a compound that contains a polyatomic ion, the metal is written first then the central atom in the ion follows before other atoms that surround the central atom in the ion.

Learn more: https://brainly.com/question/6284546

Answer:

C Region

Explanation:

C Region contains all the liquids as 0 °C is the freezing point of water (Crystals of water are formed leaving it no more in the liquid state) and 100 °C is the boiling point (The water boils leaving it no more in the liquid state).

Hence, All liquids are contained in the C region.

[tex]\rule[225]{225}{2}[/tex]

Hope this helped!

Answer:

0.716

Explanation:

First, write the balanced equation:

3 H2CO3 + 2 Fe(OH)3 ----> Fe2(CO3)3 + 6 H2O

Second, go from the molarity of H2CO3 to liters of Fe(OH)3

(Pull mole ratio from balanced equation)

1.22/1L  x  0.0880/1  x  3molH2CO3/2molFe(OH)3 x 1/0.225L

Use calculator, and you end up with 0.7157333

Round to 0.716

Answer:

See explanation.

Explanation:

Hello there!

In this case, according to the described chemical reaction, we first write the corresponding equation to obtain:

[tex]Cu+2AgNO_3\rightarrow 2Ag+Cu(NO_3)_2[/tex]

Thus, we proceed as follows:

Part 1 of 3: here, since the molar mass of silver and copper (II) nitrate are 107.87 and 187.55 g/mol respectively, and the mole ratio of the former to the latter is 2:1, we can set up the following stoichiometric expression:

[tex]m_{Cu(NO_3)_2}=1.29gAg*\frac{1molAg}{107.87gAg}*\frac{1molCu(NO_3)_2}{2molAg}*\frac{187.55gCu(NO_3)_2}{1molCu(NO_3)_2} \\\\m_{Cu(NO_3)_2}=1.12gCu(NO_3)_2[/tex]

Part 2 of 3: here, the molar mass of copper is 63.55 g/mol and the mole ratio of silver to copper is 2:1, the mass of the former that was used to start the reaction was:

[tex]m_{Cu}=1.29gAg*\frac{1molAg}{107.87gAg}*\frac{1molCu}{2molAg}*\frac{63.55gCu)_2}{1molCu} \\\\m_{Cu}=0.380gCu[/tex]

Part 3 of 3: here, the molar mass of silver nitrate is 169.87 g/mol and their mole ratio 2:2, thus, the mass of initial silver nitrate is:

[tex]m_{AgNO_3}=1.29gAg*\frac{1molAg}{107.87gAg}*\frac{2molAgNO_3}{2molAg}*\frac{169.87gAgNO_3}{1molAgNO_3} \\\\m_{AgNO_3}=2.03gAgNO_3[/tex]

Best regards!

Answer:

Explanation:

its supposed to be not supported not inclusive because you said mix

Answer:

15.5 moles

Explanation:

Applying,

PV = nRT.................. Equation 1

Where P = pressure, V = Volume, n = number of mole, R = molar gas constant, T = Temperature.

Make n the subject of the equation

n = PV/RT............... Equation 2

From the question,

Given: P = 0.899 atm, V = 425 L, T = 24 °C = (273+24) K = 297 K.

Constant: R = 0.083 L.atm/K.mol

Substitute these values into equation 2

n = (0.899×425)/(297×0.083)

n = 15.5 moles

Answer:

0.25 liter

Explanation:

Trust

Answer:

P₂ = 300 atm

Explanation:

Given that,

Initial volume, V₁ = 600 L

Initial pressure, P₁ = 400 atm

We need to find the pressure if the volume is 800 L.

We know that the relation between pressure and volume is given by :

[tex]P\propto \dfrac{1}{V}\\\\\dfrac{P_1}{P_2}=\dfrac{V_2}{V_1}\\\\P_2=\dfrac{P_1V_1}{V_2}\\\\P_2=\dfrac{600\times 400}{800}\\\\P_2=300\ atm[/tex]

So, the new pressure is equal to 300 atm.

Answer:

Pistil

Explanation:

I believe it is the pistil, because the pistil is part of the female reproductive system of a flower. A stamen is for the male reproductive system.

When the average kinetic energy of its particles increases, the object's thermal energy increases. Therefore, the thermal energy of an object increases as its temperature increases.

In chemistry, we define the temperature of a substance as the average kinetic energy of all the atoms or molecules of that substance. Not all of the particles of a substance have the same kinetic energy. At any given time, the kinetic energy of the particles can be represented by a distribution.

In physics, temperature is defined as the average kinetic energy of the particles in an object. ... When particles move more quickly, temperature is higher and an object feels warmer. When particles move more slowly, temperature is lower and an object feels cooler.

乁(ᵔヮᵔ)ㄏ

Answer:

OB. Energy transfer would occur between the copper bars and the surroundings.

Explanation:

We define an isolated system as a system in which there is neither exchange of material nor energy while an open system is one in which materials and energy can be exchanged with the environment.

Given an open system consisting of two copper bars at different temperatures, energy will not only be exchanged between the copper bars but also between the copper bars and the environment.

Answer:

1.52 M

Explanation:

Molarity of a solution is calculated as follows:

Molarity = number of moles (n) ÷ volume (V)

Based on the information given in this question,

Volume of soda (V) = 9.13 L

number of moles = 13.83 mol

Molarity = 13.83 ÷ 9.13

Molarity = 1.52 M

Answer & Explanation: Acid rain occurs when sulfur dioxide and nitrogen oxide are released into the air to create a chemical reaction. When the two mix in the air (oxygen), they will get into the water and mix with other pollutants in the air, making acid rain.

Answer:

   What is acid rain? Acid rain occurs when sulfur dioxide and nitrogen oxide are released into the air to create a chemical reaction. When the two mix in the air (oxygen), they will get into the water and mix with other pollutants in the air, making acid rain.

   What causes acid rain the most? It can be caused by useing nonrenewable resources. Which inclues coal, oil, ect.

   What effects can acid rain have? It causes respiratory issues in animals and humans. When acid rain falls down and flows into the rivers and ponds it affects the aquatic ecosystem. It alters the chemical composition of the water, to a form which is actually harmful to the aquatic ecosystem to survive and causes water pollution  which can harm our fresh water supply.

Answer:

The answer is C density.

Answer:

1.95 M

Explanation:

Molarity is a measure of the molar concentration of a substance (solution). In relation to the volume, it is calculated using the formula as follows;

C1V1 = C2V2

Where;

C1 = initial concentration (M)

C2 = final concentration (M)

V1 = initial volume (L)

V2 = final volume (L)

According to the provided information in this question;

C1 = 14.38 M

C2 = ?

V1 = 1.28 L

V2 = 9.45 L

Using C1V1 = C2V2

14.38 × 1.28 = C2 × 9.45

18.4064 = 9.45 C2

C2 = 18.4064 ÷ 9.45

C2= 1.95 M

Answer:

M1 and M2 are the masses of two. objects exerting the force on each other, and R is the distance. between their centers.

Explanation:

M1 and M2 are the masses of two. objects exerting the force on each other, and R is the distance. between their centers.

Answer:

when the velocity is at a higher *rate of speed*, the faster the object will move!

Explanation:

Answer:

The titration process has quite a few real-world uses, including key roles in the food industry and medical community. The titration process is essentially an analytical technique, as it is used to determine a chemical or physical property of a chemical substance, element, or mixture (such as food). Specifically in the food industry, it is used to allow food manufactuers to determine the quantity of a reactant in a sample. To provide an example, it can be used to find the specific amount of stuff that is usually labeled on the nutrition label, such as sugar, salt, protein, calcium, vitamin C, etc. As for the medical world, pharamcists typically use this process to get the proper mix when compounding medicines. It is used to get the necessary proportions in intravenous drips.

Answer:

ertyuioekgdctifrofy?

Explanation:

Answer:

Iron is limiting reactant

Explanation:

Based on the reaction:

Fe + S → FeS

1 mole of iron reacts per mole of Sulfur

To solve this question we must convert the mass of each reactant to moles using molar masses of each reactant. As the reaction is 1:1, the reactant with the lower amount of moles is limiting reactant.

Moles Fe -Molar mass: 55.845g/mol-

4.68g * (1mol / 55.845g) = 0.0838 moles

Moles S -Molar mass: 32.065g/mol-

2.88g * (1mol / 32.065g) = 0.0898 moles

As the amount of moles of Fe < Moles S,

Iron is limiting reactant

When 4.68 g of iron reacts with 2.88 g of sulfur to produce FeS, iron is the limiting reagent.

If in a chemical reaction two reactants are present and one of them is present in less quantity as compared to other, is known as limiting reagent.

Given chemical reaction is:
Fe + S → FeS

From the stoichiometry of the reaction it is clear that equal moles of both reactant is required for the formation of product, so their mole ratio is 1:1.

Now we calculate the moles by using the formula:

n = W/M, where

W = given mass

M = molar mass

Moles of 4.68g of iron = 4.68g / 55.845g/mole = 0.0838 moles

Moles of 2.88 of sulfur = 2.88g / 32.065g/mole = 0.0898 moles

Moles of iron is less as compare to the sulfur, so it is the limiting reagent.

Hence, iron is the limiting reagent.

To know more about limiting reagent, visit the below link:
https://brainly.com/question/14222359

Answer:

oxygen ion O2-

Explanation:

because it has 8 protons and gave gained 2 electron so O2-.

Answer:

1.)C₃H₈O

2)OH

3.)1-propanol

1.) C4H8O

2.) C2H6O or CH3CH2OH

3.)Ethanol

Explanation:

Hope this help

Answer:

0.375 mols

Explanation:

mol:mass

1 : 44

x :16.5

cross multiply and get the answer

Answer:

Explanation:

I can’t explain but this is the answer LOL

Reaction takes place is

2KClO3 --> 2KCl + 3O2

from above equation 2 moles of potassium chlorate is forming 3 moles of Oxygen gas.

now given 6.83 moles of oxygen and moles of potassium chlorate is missing,

consider x moles of potassium chlorate are needed to form 6.83 moles of oxygen

from above condition, .

3 》》》》2

x 》》》》6.83

3/x = 2/6.83

x = 3×6.83/2

x= 10.245

Answer- 10.245 moles of potassium chlorate are needed to produce 6.83 moles of oxygen gas.