which statement does not describe fission? a very heavy nucleus splits into several medium-weight nuclei. stable, lightweight nuclei start the process. several neutrons are emitted. a fast neutron starts the process.

Answers

Answer 1

The statement that does not describe fission is: Stable, lightweight nuclei start the process.

What is Fission?

A bigger atom undergoes fission when a neutron collides with it, causing it to excite and split into two smaller atoms, also referred to as fission products. This process is also known as Nuclear Fission. Additionally, additional neutrons are emitted, and these can start a chain reaction. Each atom splits, releasing a huge quantity of energy.

Hence, The statement that does not describe fission is: Stable, lightweight nuclei start the process.

To learn more about Nuclear Fission, use the given link:

https://brainly.in/question/5307142?referrer=searchResults

#SPJ4

Answer 2

The statement that does not describe fission is: Stable, lightweight nuclei start the process.

What is Fission?

A bigger atom undergoes fission when a neutron collides with it, causing it to excite and split into two smaller atoms, also referred to as fission products. This process is also known as Nuclear Fission. Additionally, additional neutrons are emitted, and these can start a chain reaction. Each atom splits, releasing a huge quantity of energy.

Hence, The statement that does not describe fission is: Stable, lightweight nuclei start the process.

To learn more about Nuclear Fission, use the given link:
https://brainly.com/question/27923750
#SPJ4


Related Questions

what will the frequency be if 0.160 kg are subtracted from the original mass? try to solve this problem without finding the force constant of the spring.

Answers

Frequencies in both cases are [tex]& f_2=1.225 \mathrm{H}_z[/tex] and [tex]}} \\& f_2=1.522 \mathrm{H}_z[/tex]

What is frequency ?

The frequency of a repeated event is its number of instances per unit of time. It differs from angular frequency and is sometimes referred to as temporal frequency for clarification. One event occurs per second when measuring frequency in hertz.

The quantity of waves that pass a set location in a predetermined period of time is known as frequency. Therefore, if a wave passes through in half a second, the frequency is 2 per second. The frequency is 100 times per hour if it takes 1/100 of an hour.

According to the given information

We got to know

A) the frequency of two spring

[tex]f=\frac{1}{2 \pi} \sqrt{\frac{k}{m}}[/tex]

for Same spring

[tex]f \propto \frac{1}{\sqrt{m}}[/tex]

So

[tex]& \frac{f_2}{f_1}=\sqrt{\frac{m_1}{m_2}} \Rightarrow f_2=f_1 \sqrt{\frac{m_1}{m_2}} \\[/tex]

[tex]& f_2=1.35 \times \sqrt{\frac{0.75}{(0.16+0.75)}} 2=222=1 \frac{1}{2} \\[/tex]

[tex]& f_2=1.225 \mathrm{H}_z[/tex]

B)

[tex]& f_2=f_1 \sqrt{\frac{m_1}{m_2}} \\& f_2=1.35 \times \sqrt{\frac{0.75}{(0.75-0.16)}} \\& f_2=1.522 \mathrm{H}_z[/tex]

Frequencies in both cases are [tex]& f_2=1.225 \mathrm{H}_z[/tex] and [tex]}} \\& f_2=1.522 \mathrm{H}_z[/tex]

To know ore about Frequency

https://brainly.com/question/13040523

#SPJ4

Listed following are several objects in the solar system. Rank these objects from left to right based on their orbital period around the Sun from shortest to longest. A typical asteroid in the asteroid belt, a trojan asteroid, a typical kuiper belt object, a typical oort cloud object

Answers

All of the objects that have been listed in the question have been ranked on the basis of the orbital period around the Sun from shortest to longest in the solar system below.

The items included are all objects that are present in the solar system other than the planets, moons, and stars. These objects, just like every other body, have an orbit in which they revolve and their revolution takes place around the Sun as well.

The order on the basis of their orbital period around the Sun from shortest to longest is as thus -

A typical asteroid in the asteroid belt, a trojan asteroid, a typical Oort cloud object, a typical Kuiper belt object

The orbital period of the items is also as thus -

A typical asteroid - 3 to 6 years

A trojan asteroid - 150 to 200 years

A typical Oort cloud object - 200 years

A typical Kulper Belt object - About 10,500 years

Learn to know more about Asteroids on

https://brainly.com/question/19161842?referrer=searchResults

#SPJ4

an undamped 2.52 kg2.52 kg horizontal spring oscillator has a spring constant of 21.6 n/m.21.6 n/m. while oscillating, it is found to have a speed of 3.34 m/s3.34 m/s as it passes through its equilibrium position. what is its amplitude ????a of oscillation? ????

Answers

The undamped horizontal spring oscillator has an amplitude of 1.61 m when passing through its equilibrium position during oscillation.

It is given to us that -

Mass of the undamped spring oscillator, m = 2.52 kg

Spring constant during oscillation, k = 21.6 n/m

Speed of the spring oscillator, v = 3.34 m/s

We have to find out the amplitude of oscillation, say A.

According to the concept of Conservation of Energy, we can say that -

[tex]\frac{1}{2} mv^{2} = \frac{1}{2} kA^{2}[/tex] ------ (1)

where,

m = mass of the oscillator

v = speed of oscillation

k = Spring constant

A = Amplitude of oscillation

Now, substituting the given values in equation (1), we have

[tex]\frac{1}{2} mv^{2} = \frac{1}{2} kA^{2}\\= > \frac{1}{2} *2.52*(3.34)^{2} = \frac{1}{2} *21.6*A^{2}\\= > 28.11211 = 10.8A^{2}\\= > A^{2}=2.60\\= > A = 1.61m[/tex]

Therefore, the undamped horizontal spring oscillator has an amplitude of 1.61 m when passing through its equilibrium position during oscillation.

To learn more about undamped oscillator visit https://brainly.com/question/25464597

#SPJ4

If the sun mysteriously gets twice as massive as it is right now, what effect will it have on its pull on mars?.

Answers

If the sun mysteriously gets twice as massive as it is right now, it's pull on Mars will be twice as much.

What would happen if the sun were twice as massive?The Sun is 93 million miles away from Earth on average, but it is still vital to maintaining life as we know it. We would undoubtedly experience substantial changes in our lives if it were to decrease, grow, or change in any manner.Most people agree that the energy that powers planet Earth comes from the sun, which is at the heart of the solar system. Our climate and weather systems are built on the light and heat that our life-supporting star emits, which also helps to support the development of life on Earth. We are also subject to the gravitational pull of the sun, and how quickly we orbit it determines how long a year is.

To learn more about sun, refer to

https://brainly.com/question/25779807

#SPJ4

a student pulls a 60 newton sled with a force having a magnitue of 20 newtons what is the magnitude of the force that the sled exerts n the students

Answers

The magnitude of the force exerted by the sled on the student is 20N

Concept:

Every action on one body causes an equal and opposite response on the other, according to Newton's third rule of motion. It implies that if a body is pulled toward itself by a human, the body will also draw the person toward itself with the same force.

The direction of the body's response to the person will be in opposition to the direction of the person's response to the body.

The sled will similarly exert the same amount of effort on the student to drag him backward in the opposite direction as the student exerts on the sled to pull it forward.

The sled's weight moves in a vertically downward direction, therefore it has no bearing on the reaction force the sled exerts on the learner.

Consequently, the sled's force on the student was of the following magnitude: 20N

Know more about Force at:

https://brainly.com/question/25239010

#SPJ4

A tugboat pulls with a constant net horizontal force of 5000 N and causes the ship to move through a harbor. How much work is done on the ship if it moves a distance of 3000m? ​

Answers

15000000 Joule work is done on the ship if it moves a distance of 3000m.

What is work done?

The amount of force multiplied by the distance moved in the force's direction is known as the work done by a force acting on an item. Work has no direction and only magnitude. Work is a scalar quantity as a result. SI unit of work is joule.

Given parameters:

horizontal force applied on the tugboat is: F = 5000N.

The tugboat moves a distance: d =3000m.

Hence, The work done on the ship is  = Fd =  5000N ×​ 3000m = 15000000 Joule.

Learn more about work here:

brainly.com/question/18094932

#SPJ1

Without his glasses, Isaac can see objects clearly only if they
are less than 4.2 m from his eyes.
What focal length glasses worn 2.1 cm from his eyes
will allow Isaac to see distant objects clearly?
Express your answer using two significant figures.

Answers

Generally speaking, the object distance indicates that the light rays emanating from the object are parallel to one another, resulting in f=-4.221.

What kind of thing is a light ray like?

A ray is defined as a small, usually straight-traveling beam of light. The laser or laser pointer's light beam is an illustration of a ray. According to the ray model of light, a ray moves in a straight line until it encounters an object, such as a mirror or the boundary between two materials.

image distance is v = 4.7 + (2.1 * 10-2) = -4.721 m the negative

means image is formed behind the lens

Generally the object distance is u = ∞ this mean the light ray coming from the object are parallel to each other.

So from lens equation

=-고=수

=> f = -4.721 m

What is a light ray, exactly?

As an electromagnetic wave, light travels in straight lines along narrow beams of light, which are referred to as rays. Despite the fact that reflection or refraction can alter its direction, light always moves in a straight line.

To know more about light ray visit:

https://brainly.com/question/1030839

#SPJ4

A lemming running 2.87 m/s runs off a horizontal cliff. It lands in the water 5.32 m from the base of the cliff. What is the lemming's change in height when it reaches the water?
(Unit = m)

Answers

16.77m is the lemming's change in height when it reaches the water.

An example of a projectile

A thing is said to be in projectile motion when it has been fired into the air. After the initial force that launches the object, it only experiences the force of gravity. It is what it is—a projectile—and the path it took to get there is what it was.

You can tell from the situation that this projectile is a Type 1 projectile, or a horizontal projectile. Before you can resolve this issue, you will need a few things.

You must first examine the information you were given:

Vix = 2.87 m/s

dx = 5.32m

Your height or vertical distance are what you need. The following is the usual formula for projectile displacement:

d = Vit +1/2gt²

Specifically, you only need to enter the y-components to obtain the vertical distance. Now keep in mind that a horizontal projectile initially moves only forward and not vertically. Your vi = om/s, leaving you with the following equation:

dy = Viyt + 1/2 gt²

dy = (0m/s)t + 1/2 gt²

dy = 1/2 gt²

However, if you examine your issue, you will discover that no time has been allotted. You can resolve it using the information provided by deriving it from the x component formula:

dx = Vixt

Plug in your knowledge and find a solution for your ignorance.

dx = Vixt

5.32m = (2.87m/s)t

5.32/2.87= t

t = 1.85s

You can solve for your vertical distance/displacement now that you know the time:

dy = 1/2 gt²

dy = 1/2 (9.8 × 1.85²)

dy = 16.77m.

To know more about projectile visit:

https://brainly.com/question/10285817

#SPJ1

Answer:

the answer is -16.8

Explanation:

it’s negative because your going down and you have to round off to match the significant digits.

isolated in an otherwise quiet country field is a single sound source. when you stand 100 m from this source, the sound level from it is 35 db. what average power is being emitted by the source?

Answers

The average power being emitted by the source is 12.56* 10⁻⁴°⁵ W.

Given that,

Sound level L = 35 db

Distance d = 100 m

We know the formula for L as, ( take I₀ as 10⁻¹²)

L = 10 log(I / I₀) = 35

log(I / I₀) = 3.5

log(10¹²×I ) = 3.5

12 + log I =3.5

log I = 3.5 - 12 = -8.5

I = 10⁻⁸°⁵ W/m²

We know the formula for intensity of sound as I = P/(4πd²)

I = P/(4πd²)

To find out power, make P as the subject,

P = I * 4πd² =  10⁻⁸°⁵ * 4* 3.14* (100)² = 10⁻⁸°⁵ * 10⁴ * 12.56 = 12.56* 10⁻⁴°⁵ W

Thus, the average power being emitted by the source is 12.56* 10⁻⁴°⁵ W.

To know more about power:

https://brainly.com/question/17155292

#SPJ4

A metal cools from an initial temperature of 225 oc to 25 oc and releases 160 j of heat energy. If the mass of the metal is 5. 0 g, what is its specific heat capacity?.

Answers

If a metal cools  while releasing 160 j of heat energy, its specific heat capacity is 1.4222 J/kg. In the event that the metal weighs 5.0 g

Why is specific heat important? What does it mean?

A amount of heat unit unit of mass needed to raise temperature temperature by one degree Celsius is known as the thermal inertia or specific heat. The ability to distinguish between various polymeric composites using specific heat can be useful in calculating the processing temperatures the volume of heat required

T₁ = 225°C

T₂ = 25°C

q = -160 J

m = 5.0 g

As we know,

q = mcΔT

Now,

-160 = 5*c*(T₂-T₁)

-160 = 5*c*(25-225)

c = -160/5(-200)

c = 0.16 J/g°c.

What distinguishes heat capacity from specific heat?

Summary. The heat capacity of a thing is indeed the amount of energy needed to raise its temperature by one degree Celsius. The amount of energy required to raise the temperature od 1 gram of a substance by 1oC is known as its specific heat.

To know more about specific heat capacity visit:

https://brainly.com/question/28302909

#SPJ4

A stationary boat bobs up and down with a period of 2.1 s when it encounters the waves from a moving boat.
What is the frequency of the waves? If the crests of the waves are 8.8 m apart, what is their speed?

Answers

The frequency of the waves is 0.48Hz and  their speed is 4.2m/s.

Define frequency.

The number of waves passing a fixed place in a unit of time is known as frequency.

Given ,

Time ,t is 2.1s

Frequency, F =1/t

                   F =1/2.1

                  F =0.48Hz

A periodic wave's wavelength, or the distance over which the wave's shape repeats, is its spatial period. It is the separation between neighboring wave points that correspond to the same phase, such as two adjacent crests, troughs, or zero crossings. It is a property of both traveling waves and standing waves as well as other spatial wave patterns. The spatial frequency is the wavelength's reciprocal. The Greek letter lambda ( λ) is frequently used to denote wavelength.

Speed ,v = λ / T.

            v = 8.8/2.1

            v  =4.2m/s

To learn more about frequency  use link below:

https://brainly.com/question/254161

#SPJ4

what would a permanently magnetic substance be called? a. soft magnet c. hard magnet b. fast magnet d. quick magnet please select the best answer from the choices provided a b c d

Answers

The ideal response is C. Hard magnets are substances that are permanently magnetic.

What kind of magnet would you say is hard?

An illustration of a naturally hard magnetic substance is iron. The strongest powerful permanent magnets were NdFeB, which are produced from powdered grains of various alloys in a pressure and at high temperatures.

How is a hard magnet created?

Soft magnets possess low values for coercivity (Hc), whereas hard magnets have high values, allowing them to maintain their magnetization even in the absence of any applied field. The hysteresis loops of soft and hard magnets are contrasted in the picture on the right.

To know more about hard magnets visit:

https://brainly.com/question/4030249

#SPJ4

A diatomic element has six bonding electrons, six non-bonding electrons, and 2 anti-bonding electrons. What is the bond order?.

Answers

Bond order for the diatomic element is 2

A bond order is something that pairs two atoms with their atoms.

It is an atomic-level phenomenon in which elements share their electrons to fill their valence shell. It can also bind two or more substances together in a compound.

According to molecular orbital theory, the bond order is half the difference between the bonding and antibonding electrons.

Mathematically, Bond Order = 0.5 (No of bonding electrons - No of anti-bonding electrons)

Bonding electrons of the element = 6

Anti-bonding electrons of the element = 2

Difference = bonding electrons - anti-bonding electrons

= 6 - 2

= 4

Bond order = (0.5)*(difference)

Bond order = (0.5)*(4)
Bond order = 2

Bond order for the diatomic element has six bonding electrons, six non-bonding electrons, and 2 anti-bonding electrons is 2.

To know more about Bond order,

https://brainly.com/question/29577384

#SPJ4

two objects a and b move toward each other with speeds of 10 m/s and 2 m/s, respectively. the mass of a is 2 kg and that of b is 10 kg. after a head-on, perfectly inelastic collision, the speed of a and b is? g

Answers

Answer:

The speed of a and b will be same about 3.333 m/s after collision.

Explanation:

In a perfectly inelastic collision the bodies gets attached to each other after collision .

In this type of collision the final  kinetic energy gets lowered than the initial one. Whereas the momentum before and after the collision still remains constant.

Thus we apply the theory of conservation of momentum.

M1V1+ M2V2 = (M1+M2)V

Thus V= 40/12 =3.33 m/s

Learn more about inelastic collision here https://brainly.com/question/14521843

#SPJ4

suppose that 20 j of work is needed to stretch a spring from a0 cm to 2a0 cm. 80 j of work is needed to stretch it from a1 cm to 2a1 cm. what is the natural length of the spring. note that a0 and a1 are some constants and the unit is cm instead of m

Answers

Let L be the natural length,

Since 20J of work is needed to stretch the spring from a₀ cm to 2a₀ cm,

We have,

20 = k/2 [ (2a₀-L)² - (a₀-L)²] --------- eq 1

Again,

80 J of work is needed to stretch the spring from a₁ cm to 2a₁ cm,

80 = k/2 [ (2a₁-L)² - (a₁-L)²] ---------- eq 2

Now,

eq 2 / eq 1

k/2 [ (2a₀-L)² - (a₀-L)²] / k/2 [ (2a₁-L)² - (a₁-L)²] = (80/20)

a₁(3a₁ - 2L) / a₀(3a₀ - 2L) = 4

3a₁² - 2La₁ / 3a₀² - 2La₀ = 4

3a₁² - 2La₁ = 12a₀² - 8La₀

L(8a₀ - 2a₁) = 12a₀² - 3a₁²

L = (12a₀² - 3a₁²) / (8a₀ - 2a₁)

Therefore the required length of spring or the natural length is (12a₀² - 3a₁²) / (8a₀ - 2a₁).

To know more about spring, refer: https://brainly.com/question/14670501

#SPJ4

The long straight wire in the figure carries a current i that is decreasing with time at a constant rate. The circular loops a, b, and c all lie in a plane containing the wire. The induced emf in each of the loops a, b, and c is such that.

Answers

The induced EMF in each of the loops a, b, and c is such that loop A has a counter-clockwise EMF, loop B has no induced EMF, and loop C has a clockwise EMF.

How is the direction of EMF decided?As given in the figure, the loops a, b, c are decreasing with time.The direction of current is left to right.Due to which ,  current is maximum at loop A and minimum at loop C .We know, if current is maximum then the magnetic field is also maximum.If magnetic field is maximum then induced magnetic field is minimum and hence induced EMF is also minimum.Because the EMF is minimum loop A will rotate counter-clockwise .Since, loop B is along the wire there is no magnetic field hence no EMF .And loop C is at minimum hence more EMF is generated and hence it rotates clockwise .What is EMF ?

The highest potential difference between two electrodes of a galvanic or voltaic cell is what creates electromagnetic force. The characteristic has to do with how readily an element, molecule, or ion tends to gain (gain) or lose electrons.

Can learn more about EMF from

https://brainly.in/question/2132850

#SPJ4

in situ quantification of the active sites turnover frequency and stability of ni-fe oxy hydrooxide for the oxygen evolution reaction

Answers

The intrinsic catalytic characteristics of nanoscale electro catalysts requires quantification of the active site count and site-specific turnover frequency (TOF).

How does turnover frequency and stability of ni-fe oxy hydroxide for the oxygen evolution reaction?

Understanding the intrinsic catalytic characteristics of nanoscale electro catalysts requires quantification of the active site count and site-specific turnover frequency (TOF).

The understanding of Ni-Fe (oxy)hydroxides' electro catalytic activity and stability is hampered by the lack of efficient methods for measuring the Fe active site number and the intrinsic turnover frequency per active Fe site (TOFFe), despite the fact that Fe has been proposed as one of the most active noble-metal-free electro catalysts for the alkaline oxygen evolution reaction (OER).

The direct in situ quantification of the electrochemically active Fe site number and associated TOFFe values of Ni-Fe (oxy)hydroxides using previously unstudied Fe2+/3+ redox electrochemistry in alkaline solutions is described in this article.

To learn more about intrinsic catalyst refer to :

https://brainly.com/question/12507566

#SPJ4

(figure 1) shows the cost of locomotion as a function of body mass. using this plot, determine the amount of energy expended by usain bolt during the 100 m sprint.

Answers

Assuming Usain Bolt begins at rest (with zero initial velocity) and his motion is uniformly accelerated, his position at time t is given by

where a denotes the average acceleration and t denotes the time. Because the distance covered in our problem is S=100 m and the time taken is t=9.58 s, the average acceleration can be calculated by rearranging the previous formula:

1175.50 kg m/s

Usain Bolt's weight is 93.89 kg.

The average velocity in a 100-meter sprint is 12.52 metres per second.

The momentum can be calculated by taking the product of mass and velocity and multiplying it by

The following factors provide momentum:kg m/s

where denotes mass and denotes velocity

Thus, Usain Bolt's momentum can be calculated by plugging in the given values for

To learn more about accelerated please click on below link

https://brainly.com/question/12550364

#SPJ4

When a metal car is struck by lightning, the resulting electric field inside the car is?.

Answers

When a metal car is struck by lightning, the resulting electric field inside the car is zero.

What is Electric field ?

The electric force per unit charge is referred to as the electric field. It is assumed that the field's direction corresponds to the force it would apply to a positive test charge.

The roof and walls of the car provide a path of less resistance than the interior of the car, which is why a person inside a car does not get struck by lightning.

When lightning is present, it is safer to sit under a car than to stand under a tree. Inside the car, there is no electric field.

The metal cage that encloses the occupants of cars protects them from lightning.

Learn more about Electric field here:

https://brainly.com/question/14372859

#SPJ4

which of the following are postulates of the kinetic molecular theory of gases? multiple select question. the average kinetic energy of the gas particles is inversely proportional to the absolute temperature. the gas particles are in constant, random motion although they do move in straight lines. the gas particles do not exert attractive or repulsive forces on each other. collision of gas particles are assumed to be elastic. the volume of gas particles is negligible compared to the volume occupied by the gas.

Answers

The relationship between the absolute temperature and the average kinetic energy of the gas particles is inverse. Gas particle collisions are thought to be elastic.

When compared to the volume that the gas occupies, the volume of the gas particles is insignificant. There are no forces of attraction or repulsion between the gas particle. Although they travel in straight lines, the gas particles are constantly in a random motion.

What is particle collision?

There may be collisions between the particles and the wall during particle flows. The kinetic energy lost upon particle collision can cause frictional heat to be produced, walls to erode, particles to shatter or deform, be aggregated, or substances to become electrified.

What occurs when gases come together?

Gas molecules exclusively interact with one another through collisions; they do not apply any other forces. They don't adhere to one another.  All gas molecule collisions are flawlessly elastic, and all kinetic energy is preserved.

To know more about Collision in gas visit:

https://brainly.com/question/16615446

#SPJ4

Argon gas has several industrial uses, including arc welding and steel making. Argon is nonflammable and nontoxic, and so can be kept at room temperature (T = 19° C). Companies can buy Argon gas in cylinders which are kept at pressure of P = 246 psi. In this problem you may assume that ideal gas law still holds.

A) How much average kinetic energy (in J) does each atom of the argon gas in the cylinder have?

B) If the volume is 197L, how many moles of Argon are inside?

Answers

A. The average kinetic energy for each atom of argon gas in the cylinder is 6.04 × 10⁻²¹ Joule.

B. The number of moles of argon inside the cylinder is 1.38 × 10² mol.

The formula to calculate the average kinetic energy for monoatomic gas is

KE = 3/2 kT

T = the temperature (K)
T = 19 °C = 19 + 273 = 292 Kk = Boltzmann constant = 1.38 × 10⁻²³ J/KKE = the average kinetic energy (J)

KE = 1.5 kT

KE = 1.5 × 1.38 × 10⁻²³ × 292

KE = 6.04 × 10⁻²¹ J

For every ideal gas applies the ideal gas equation

PV = nRT

P = the pressure (Pascal)
P = 246 psi = 246 × 6.89 × 10³ = 1.7 × 10⁶ PascalV = volume (m³)
V = 197 L = 197 ÷ 1,000 m³ = 1.97 × 10⁻¹ m³n = the number of moles (mol)R = ideal gas constant = 8.314 J/mol KT = the temperature (K)

PV = nRT

1.7 × 10⁶ × 1.97 × 10⁻¹ = n × 8.314 × 292

3.35 × 10⁵ = n × 2.43 × 10³

n = 1.38 × 10² mol

Learn more about ideal gas equation here: https://brainly.com/question/25290815

#SPJ4

learning goal: to understand the role of friction in a state of equilibrium. a chair weighing 70.0 n rests on a level floor that is not frictionless. a man pushes on the chair with a force f

Answers

The magnitude of the normal force that the floor exerts on the chair is 93.79 Ncoefficient of static friction μ is 0.32

What is coefficient of static friction?The resistive force of friction (Fr) divided by the normal or perpendicular force (N) pushing the objects together yields the coefficient of friction (fr), which is a numerical value. The formula fr = Fr/N serves as a representation of it."The highest ratio of applied force to normal force with no motion is called the coefficient of static friction." We all understand that a force called friction resists motion. If we carefully notice, there is a point at which the body opposes movement after force is applied to move it from rest.The things that are creating friction determine the coefficient of static friction's value. Its value typically ranges from 0 to 1, but it can also be higher than 1.

Given details :

Weight of chair W = 70 NForce P = 39 NAngle = 38°

1.Force equilibrium in x direction

∑ [tex]F{x}[/tex] = 0

F - 39 cos Ф = 0

As Ф = 38°

F = 39 cos38°

F = 30.73 N

Force equilibrium in y direction

∑ [tex]F{y}[/tex] = 0

N = W + P sin38°

   =  70 + 39 sin38°

N = 93.79 N

Thus the normal force on chair = 93.79 N

From the free body diagram

F = μN

30.73 = μ x 93.79

μ = 30.73 / 93.79 = 0.32

Learn more about coefficient of static friction refer to :

https://brainly.com/question/25534663

#SPJ1

what capacitor in series with a 100ω resistor and a 30.0 mh inductor will give a resonance frequency of 1040 hz ?

Answers

Capacitance is C = [tex]8.126[/tex] × [tex]10^{-4}[/tex]

What is Capacitance ?

A material thing or device's capacitance is its ability to hold electric charge. The ratio of those two values is used to calculate the change in charge in response to an alteration in electric potential.

According to the given information

The RLC circuit's resonant frequency is determined by

f = [tex]\frac{1}{2\pi \sqrt{LC} }[/tex]

L is the circuit's inductance, and C is its capacitance.

By rearranging the equation, we get

C = [tex]\frac{1}{(2\pi) ^{2}f^{2} L }[/tex]

and by substituting the inductance of the circuit L = 30mH = 0.030mH

The resonant frequency f = 1040 Hz

We need to find the value of the capacitance

By substituting the values in C

C = [tex]\frac{1}{(2\pi) ^{2}(1040)^{2}(0.03) }[/tex]

C = 0.0008126 [tex]u[/tex]C

C = [tex]8.126[/tex] × [tex]10^{-4}[/tex]

Capacitance is C = [tex]8.126[/tex] × [tex]10^{-4}[/tex]

To know more about Capacitance

https://brainly.com/question/12644355

#SPJ4

sixteen-year-old michael begins growing a marijuana plant in a corner of his family's garden. his father asks him to remove it because it is illegal. in kohlberg's terms, michael's father is demonstrating reasoning.

Answers

In Kohlberg's terms, Michael's father is demonstrating Conventional reasoning.

According to Kohlberg's Structural Theory of Moral Development, conventional moral reasoning is the second of three levels of moral reasoning. At this level, people have internalized the moral standards and expectations of those closest to them and typically base their moral decisions on these standards and expectations.

In the given question, Michael is unaware that marijuana is prohibited, but his grandfather has instructed him to take it out because it is forbidden. It is unlawful, according to his father. It demonstrates that his father is aware of the laws. He believes that they must follow it since it is their responsibility, or else his son would be punished for breaking the law.

Read more about conventional reasoning on:

https://brainly.com/question/13295787

#SPJ4

what is the concentration of a chemical in an oil spill in ppb if 0.060 mg of it is found in 4600 kg of soil?

Answers

The concentration of an chemical in an oil spill in ppb is 0.013 ppb (approx).

What is concentration?

concentration is the abundance of a constituent divided by the total volume to the  mixture. Several by the  types of mathematical description can be the  distinguished: mass of the  concentration, molar concentration, number and  concentration, and volume concentration.

Calculate the concentration in ppb by multiplying to the  ratio of the mass of solute to  mass of solution by 1 billion or 10 ^9

So here the answer can be calculated by

(10^ 9)(6×10 ^-8)/4600

(Here 0.060 mg = 6 × 10 ^-8 kh)

=  6/460

= 0.013 ppb (approx)

To know more about concentration click-

https://brainly.com/question/17206790

#SPJ1

as like charges move closer together their lines of force bend farther away from the other charge and push together into a smaller space what does this indicate about the size of the forces between them

Answers

This indicates that the size of forces between the like charge are strong.

What is charge?

Electric charge is the property of subatomic particle. This property makes these particles to experience the electric force of attraction and repulsion. there are two type of charges, positive and negative charge. The force experienced by two like charges is of repulsion and that of unlike charges is attraction. These forces are proportional to the extend of charge.

What are like and unlike charges?

The charges that experience the electric force of attraction when brought closer are known as unlike charges. When +ve and -ve charges are brought closer they experience the electric force of attraction. The charges that experience the electric force of repultion when brought closer are known as like charges. When two +ve and +ve charges are brought closer they experience the electric force of repulsion.

To know more about electric charge visit:

https://brainly.com/question/9194793

#SPJ4

current will travel along the path with the highest resistance. please select the best answer from the choices provided t f

Answers

False. Current will travel along the path with the lowest resistance. This is because electrons will take the path of least resistance in order to reach the point of lowest potential energy.

The Principle of Lowest Resistance: Exploring Electron Flow

The concept of electrons traveling along paths of least resistance is a fundamental principle of electrical engineering. This principle, known as the principle of lowest resistance, states that electrons will take the path of least resistance in order to reach the point of lowest potential energy. This phenomenon has implications in various areas of electrical engineering, from circuit design to power distribution.

The basic principle of lowest resistance can be demonstrated with a simple circuit. Imagine a circuit with two parallel paths, one with a higher resistance and one with a lower resistance. When a voltage is applied to the circuit, electrons will flow along the path of least resistance, which in this case is the one with the lower resistance.

Learn more about The Principle of Lowest Resistance:

https://brainly.com/question/14552815

#SPJ4

write voltage drops across the resistor, capacitor, and inductor and the source voltage as a function of time.

Answers

As the charge, ( Q ) is equal and constant, the voltage drop across the capacitor is determined by the value of the capacitor only as V = Q ÷ C.

What is charge?

Charged material experiences a force when it is exposed to an electromagnetic field due to the physical characteristic of electric charge. You might have a positive or negative electric charge. Unlike charges attract one another while like charges repel one another.

As the charge, ( Q ) is equal and constant, the voltage drop across the capacitor is determined by the value of the capacitor only as V = Q ÷ C. A small capacitance value will result in a larger voltage while a large value of capacitance will result in a smaller voltage drop.

While the voltage drop across a resistor is proportional to the current and there is a current at the beginning, the voltage drop across a capacitor is related to its charge and is uncharged at the beginning. However, when charge on the capacitor begins to accumulate, some voltage is now lost across the capacitor.

To learn more about charge visit:https://brainly.com/question/19886264

#SPJ4

What is the acceleration of a racehorse that is running 19 m/s and the
track has a radius of 50 m?

Answers

The acceleration of a racehorse that is running 19 m/s and the track has a radius of 50 m is 7.22 m/s².

What is centripetal acceleration?

Centripetal acceleration, the acceleration of a body in a circular orbit. Since velocity is a vector quantity (that is, it has both magnitude, velocity, and direction), as an object moves along a circular path, its direction and velocity constantly change, resulting in acceleration. The centripetal acceleration ac has a magnitude equal to the square of the body velocity v along the curve divided by the distance r from the center of the circle to the moving body. That is, α = v²/r. Centripetal acceleration has units of meters per second squared. The force that causes this acceleration is also directed toward the center of the circle and is called the centripetal force.

α = v²/r

Where, α = centripetal acceleration

r = radius (50 m)

v = velocity (19 m/s)

α = 19²/50

α = 7.22 m/s²

To know more about centripetal acceleration, visit:

https://brainly.com/question/14465119

#SPJ1

Air in an ideal Diesel cycle is compressed from 4 L to 0.25 L, and then it expands during the constant pressure heat addition process to 0.50 L. Under cold air standard conditions, determine the thermal efficiency of this cycle.

Answers

Under cold air standard conditions, Then the thermal efficiency of this cycle is 61.38%.

n= 1- ((a^x)-1)/(x*e^(x-1) *(a-1)

n=thermal efficiency

e=compression ratio= v1/v2

a=cut off ratio=V3/V2

x=Cp/Cv=1.4 for air

v1=4L

v2=0.25L

v3=0.5 L

e= 4/0.25=16

a= 0.5/0.25 =2

n= 1- ((2^1.4)-1)/(1.4*16^(1.4-1) *(2-1) = .6138 = 61.38%

A system's thermal efficiency is determined by how much work is produced for every unit of heat input. Work is produced by heat engines. The percentage of heat that is converted into usable work is expressed as thermal efficiency.

Learn more about thermal efficiency here:

https://brainly.com/question/29056986

#SPJ4

Other Questions
at the homecoming game, cheerleaders will throw 100 bundled t-shirts into the crowd. the t-shirt sizes consist of 20 small, 30 medium, and the remainder either large or extra large. suppose you catch a t-shirt. what is the probability that you will catch a t-shirt that is not a size medium? Lucas, Mason, Logan, and Jayden have 5 grapefruits. They want to share them equally. How much grapefruit will each person get? SOLVE FOR N3/2 -1/2n= 2n+3N = A ________ includes a buyer, a seller, a product or service and other factors, such as how the physical environment makes one feel.A) post-purchase processB) purchase processC) consumption situationD) psychological situation what is true regarding the comparisons between asynchronous transfer mode (atm) and frame relay (fr)? a. fr has predictable data delays compared to atm where delays are variable b. atm cannot easily support real-time voice, whereas fr readily supports real-time voice c. fr consists of variable sized data frames, whereas atm is comprised of fixed cell sizes d. neither atm nor fr are connection-oriented protocols I want to know how to do this problem a recent survey reported that small businesses spend 24 hours a week marketing their business. a local chamber of commerce claims that small businesses in their area are not growing because these businesses are spending less than 24 hours a week on marketing. the chamber conducts a survey of 58 small businesses within their state and finds that the average amount of time spent on marketing is 22.7 hours a week. assuming that the population standard deviation is 6.1 hours, is there sufficient evidence to support the chamber of commerces claim at the 0.02 level of significance? he three blocks (from left to right in the figure) have masses of 3.38 kg, 0.702 kg and 7.80 kg. the leftmost block has a velocity of 3.51 m/s toward the right, the center block is stationary, and the rightmost block as a velocity of 2.79 m/s toward the left. assuming movement toward the right is positive, what is the velocity of the center-of-mass of this system as pictured (prior to collision)? give your answer with the appropriate sign. (fill in the blank) The study of changes in societies and cultures over time, providing a more historical, macro-level perspective on social networking antidiuretic hormone is: question 3 options: 1) a hormone produced by the adrenal cortex that regulates na+ reabsorption and k+ secretion by the kidneys. 2) hormone produced by the hypothalamus and released by the posterior pituitary. it stimulates the kidneys to reabsorb more water, reducing urine volume. 3) a hormone released by certain cells of the frontal lobe that reduces blood pressure and blood volume by inhibiting nearly all events that promote vasoconstriction and na+ and water retention. 4) a hormone released by certain cells of the heart atria that reduces blood pressure and blood volume by inhibiting nearly all events that promote vasoconstriction and na+ and water retention. Nuclear decay occurs according to first-order kinetics. What is the rate constant for radon-220, which has a half-life of 55. 6 seconds?. -7x + 4y = 24 4x - 4y = 0 solve by substitution - please add explanation and work credit risk implies that the promised yield to maturity on the bond is higher than the expected yield. t/f the nurse is providing passive range of motion (rom) exercises to the hip and knee for a client who is unconscious. after supporting the client's knee with one hand, what action should the nurse take next? A statistic summarizing the strength of association between two metric variables is called the ________.A) product moment correlationB) covariance correlationC) inverse correlationD) bivariate correlationE) F-statistic Lincoln informed the authorities in south carolina that he was going to ______ the island fort in the charleston harbor but not ______ unless the supply ships met with resistance. a coalition is determined by the commitment of its members to a. the formal hierarchy of the coalition. b. collectively focus their action on an intended target. c. maintain regular and accurate communication. d. meet on a regular basis. what is disadvantage and advantage of file link system in traditional at one University? assume that the t-shirt industry is perfectly competitive. if the industry is in long-run equilibrium when the market price of t-shirts is $10: jerome was held hostage by gunmen along with 30 others in a 5-star hotel. he had witnessed the gunmen shoot other hostages and was denied food and water for two whole days. since then, jerome has had trouble sleeping and focusing on his work. sometimes, jerome loses track of where he is and feels like he is back at the hotel. these flashback episodes terrify jerome and disturb his peace of mind. in the context of anxiety and anxiety-related disorders, it can be inferred that jerome shows symptoms suggestive ofA) schizophrenia B) social anxiety disorder. C) post-traumatic stress disorder. D) obsessive-compulsive disorder.