-0. 833m/s is the velocity of the centre-of-mass of this system, prior to the collision.
What is Centre-of-mass?
The unique location where the weighted relative position of the distributed mass accumulates to zero is known as the centre of mass of a distribution of mass in space (also known as the balance point). At this location, a force can be applied to produce a linear acceleration alone, not an angular acceleration.
What is Collision?
In physics, the abrupt, violent meeting of two bodies in direct contact is referred to as an impact. Examples of such bodies are two pool cues, a golf club and a ball, a hammer and a nail head, two railroad cars when linked, or a falling object and a floor. The force and the amount of time the objects are in touch, in addition to the materials the two objects are made of, have an impact on the outcome of the impact. It is generally knowledge that a hard steel ball dropped on a steel plate would rebound almost to the original position from where it was dropped, while a ball made of putty or lead will not.
What are the Calculations?
There are typically 3 masses named
m1= 3.38kg
m2= 0.702kg
m3= 7.80kg
Here m2 stays stationary hence its velocity (v2= 0)
Let the final velocity be V
Value of m1 + m2 + m3 = 3.38 + 0.702 + 7.8 = 11.882kg
A/Q V= m1v1/11.882 + m2v2/11.882 + m3v3/11.882
m1v1/11.882= 3.38 * 3.51/11.882= 0.998
m3v3/11.882= 7.8 * (-2.79) /11.882= -1. 831 ( here -ve sign is taken as the velocity of m3 is towards the left which is negative)
Hence, after simplifying V= m1v1/11.882 + m2v2/11.882 + m3v3/11.882 the final answer is -0. 833m/s
To know more about the Centre of mass, check out:
https://brainly.com/question/17088562
#SPJ4
quadrasteer steering systems are being discussed. technician a says at low speeds, the rear wheels turn in the same direction as the front wheels. technician b says at high speeds, the rear wheels turn in the direction opposite to the front wheels. who is correct?
Neither a or b is correct.
What is speed?
An object's velocity (commonly denoted by v) is the rate of change of position over time, or the rate of change of position per unit time. So it's a scalar quantity. The average velocity of an object over a time interval is the distance traveled by the object divided by the duration of the interval. The instantaneous velocity is the limit of the average velocity as the time interval approaches zero. Velocity is not the same as speed.
Velocity is the dimension of distance divided by time. The SI unit for speed is meters per second (m/s), but the most common everyday speed units are kilometers per hour (km/h) or miles per hour (mph) in the US and UK. ). Knots are widely used in air and sea travel.
According to special relativity, the fastest speed at which energy or information can travel is the speed of light in a vacuum c = 299792458 meters/second (approximately 10790000000 km/h or 671000000 mph). Matter can never fully reach the speed of light because it requires infinite energy. In relativity physics, the concept of velocity replaces the classical idea of velocity.
Therefore, Neither a or b is correct
To know more about speed, check out:
https://brainly.com/question/13943409
#SPJ4
place), estimate the hydraulic conductivity [m/d] of the unconfined aquifer. the radius of influence around the pumping well is approximately 500 m
It is not possible for me to accurately estimate the hydraulic conductivity of an unconfined aquifer without additional information.
The hydraulic conductivity of an aquifer is a measure of its ability to transmit water, and it depends on various factors such as the porosity and permeability of the aquifer materials, the depth and thickness of the aquifer, the extent of the aquifer's saturation with water, and the hydraulic gradient within the aquifer.
The radius of influence around a pumping well is not necessarily related to the hydraulic conductivity of an aquifer.
In order to estimate the hydraulic conductivity of an unconfined aquifer, a hydrologist would need to conduct detailed field measurements and possibly use modeling techniques to take into account the various factors that affect the aquifer's ability to transmit water.
Learn more about hydraulic conductivity:
https://brainly.com/question/16227436
#SPJ4
a uniform thin rod of length 0.832 m0.832 m is hung from a horizontal nail passing through a small hole in the rod located 0.084 m0.084 m from the rod's end. when the rod is set swinging about the nail at small amplitude, what is the period Tt of oscillation?
The time period of oscillation is 1.670s
What is time period?
A period of time committed for a specific activity that regularly takes up a portion of a calendar year.
Time period of rod is calculated by
T = 2π [tex]\sqrt{\frac{I}{MgD} }[/tex]
Here,
D = x = [tex]\frac{L}{2} -0.084[/tex]
= 0.332m
The moment of inertia = [tex]I[/tex] = [tex]I_cm + MD^2 \\[/tex]
[tex]= \frac{1}{12} MD^2 + Mx^2[/tex]
Time period = 2π [tex]\sqrt{\frac{I}{MgD} }[/tex]
= 2π [tex]\sqrt{\frac{I}{MgD} }[/tex]
where [tex]I =[/tex] [tex]\frac{1}{12} MD^2 + Mx^2[/tex]
= 2π [tex]\sqrt{\frac{ \frac{1}{12} 0.832^2 + 0.084^2}{9.8 * 0.084}[/tex]
= 2π [tex]\sqrt{ \frac{0.0576 + 0.00059}{0.8232}[/tex]
= 2π * 0.265
= 1.670s
The time period of oscillation is 1.670s
To know more about time period, check out:
https://brainly.com/question/20070798
#SPJ4
evidence from distant supernovae (as well as from studies of the cosmic microwave background) seems to suggest that the universe is doing something that goes against what nearly all astronomers expected just a decade ago. what is this phenomenon, which is variously attributed to things called the cosmological constant, dark energy, or quintessence?
The first light to ever be capable of freely circling the entire universe is what is known as the Cosmic Microwave Background (CMB), and it has since been cooled.
What is Cosmic Microwave Background (CMB) radiation?In 1965, the CMB radiation was unintentionally discovered. Two radio astronomers from the United States, Penzias and Wilson, recorded a signal in their radio telescope that was impossible to attribute to a specific source in the sky. Day or night, summer or winter, it appeared to have the same intensity everywhere. They came to the conclusion that the signal had to originate from outside of our galaxy. It almost came from the beginning of the universe.Their discovery was viewed by scientists as strong support for the "Big Bang" theory. According to this theory, the 'shockwave' of that primordial explosion would still be observable as a subdued 'wallpaper' coming from everywhere behind all galaxies, quasars, and galaxy clusters. As of right now, the Big Bang theory is still the only theory that can satisfactorily account for the CMB's existence. This theory proposes that the Universe initially consisted of a very hot and dense phase that expanded and then naturally cooled; the temperature during this period was so high that neutral atoms could not form for several hundreds of thousands of years. Neutrons and charged particles were the primary components of matter. At that time, light and matter were tightly coupled because electrons and light particles interacted closely. The Universe was opaque as a result of the inability of light to propagate.To Learn more About Cosmic Microwave Background refer to:
https://brainly.com/question/12468898
#SPJ4
multiple-concept example 7 explores the approach taken in problems such as this one. the blades of a ceiling fan have a radius of 0.380 mm and are rotating about a fixed axis with an angular velocity of 1.50rad/s 1.50rad/s . when the switch on the fan is turned to a higher speed, the blades acquire an angular acceleration of 2.00rad/s2 2.00rad/s2 . after 0.500 ss the blades acquire an angular acceleration of 2.00rad/s2 2.00rad/s2 . after 0.500 ss has clapsed since the switch was resct, what is (a) the total acceleration (in m/s2)m/s2) of a point on the tip of a blade and (b)(b) the angle ϕϕ between the total acceleration a→a→ and the centripetal acceleratio
The angle of total acceleration with centripetal acceleration is 13.14 degree.
What is acceleration?
The rate at which an object's velocity with regard to time changes is referred to as acceleration in mechanics. It is a vector quantity to accelerate. The direction of an object's acceleration is determined by the net force that is acting on it. the quantity of acceleration a body undergoes in accordance with Newton's Second Law. For instance, when a vehicle moves from the a standstill (nil velocity, inside of an inertial frame of reference to the a straight line at increasing speeds, it accelerates inside the direction of travel.
Here ,
radius , r = 0.380 m
angular velocity , w = 1.50 rad/s
angular acceleration ,alpha = 2 rad/s^2
after the time 0.5 s
for the final angular velocity
wf = wi + alpha * t
wf = 1.50 + 2 * 1
wf = 2.5 rad/s
Centripetal Acceleration: wf2 * r
ac = 2.5^2 * 0.380 m/s^2
ac = 2.375 m/s^2
for tangential acceleration
at = alpha * r
at = 1.5 * 0.380
at = 0.57 m/s^2
a) for the total acceleration = sqrt(at^2 + ac^2)
total acceleration = sqrt(2.375^2 + 0.57^2)
total acceleration = 2.44 m/s^2
b)
angle =arctan(at/acceleration)
angle = arctan(0.57/2.44)
angle = 13.14 degree
The angle of total acceleration with centripetal acceleration is 13.14 degree
To learn more about acceleration
https://brainly.com/question/26408808
#SPJ4
Ben is measuring the effect that the potential energy of an object has on the height of an object's bounce
Which variable represents the height of an object's bounce?
Independent variable
Confounding variable
Response variable
Explanatory variable
The variable which represents the height of an object's bounce is Option A. Response variable
What is a response variable ?In a study or experiment, the query is focused on the response variable. A variable that explains changes in another variable is an explanatory variable. Anything could have an impact on the response variable.
The variable whose fluctuation depends on other variables is known as a response variable (or dependent variable).
The independent variable, often known as the explanatory variable, and the response variable are frequently connected. In an experiment, the response variable is the thing that changes, frequently as a result of variations in the explanatory factors.
To know more about response variable you may visit the link:
https://brainly.com/question/14662435
#SPJ4
an object is 50 cm from a concave mirror with radius of curvature of magnitude 60 cm. what is the transverse magnification produced by the mirror?
An object is 50 cm from a concave mirror with radius of curvature of magnitude 60 cm. The transverse magnification produced by the mirror is 75 cm.
To find the transverse magnification, the given data is,
object distance=p=50cm
Radius of curvature=R=60cm
What is the magnification?Magnification refers to the image's size in relation to the item that produced it.
The ratio of image length to object length, measured in planes perpendicular to the optical axis, is referred to as linear magnification.
For imaging, optical microscopes combine ocular and objective lenses. The sum of the magnifying powers of the individual lenses produces the observation magnifying power.
then f=R/2
f=60/2
f=30cm
Using mirror formula,
1/f=1/p+1/q
1/30=1/50+1/q
1/30–1/50=1/q
(5–3)/150=1/q
2/150=1/q
2q=150
q=75
The transverse magnification produced by the mirror is 75 cm.
Learn more about Magnification,
https://brainly.com/question/20368024
#SPJ1
the mass of the puck is difficult to measure because it sublimates and looses mass over time. can this explain the difference between the spring constants you found in part 1 and part 2? give your answer as a cer.
The spring stiffness is quantified by the spring constant, or k. For various springs and materials, it varies. The stiffer the spring is and the harder it is to stretch, the larger the spring constant.
F = -kx. The term "spring constant" refers to the proportional constant k. It gauges the stiffness of the spring. A spring exerts a force F = -kx in the direction of its equilibrium position when it is stretched or compressed to a length that differs by an amount x from its equilibrium length. A large value of k indicates that more force is needed to stretch it a given distance than would be necessary to stretch a less stiff spring the same distance.
Learn more about spring constant here-
https://brainly.com/question/14159361
#SPJ4
two inductors of self-inductance l1 and l2 are connected in parallel. the inductors are magnetically shielded from one another so that neither produces flux in the other. show that the self-inductance of the combination is given by 1 l
Voltage is proportional to inductance just as, for resistors, it is proportional to resistance. Now, the (independent) voltages for parallel elements are equal (V₁ = V₂) and the currents (which are generally functions of time) add i(t) = i₁(t) + i₂(t)
This leads to the equation,
i = i₁ + i₂ + i₃ = V [(1/R₁) + (1/R₂) + (1/R₃)] for resistors.
We note that this condition on the currents implies
d₁(t)/dt + d₂(t)/dt = d(it)/dt
Thus, although the inductance equation, ε = -L(di/dt) involves the rate of change of current, as opposed to current itself, the conditions that led to the parallel resistor formula also apply to inductors.
Therefore, 1/L(eq) = 1/L₁ + 1/L₂
Therefore to ensure the independence of the voltage values, it is important that the inductors not be too close together. The requirement is that the field of one inductor not to have significant influence (or "coupling") in the next.
To know more about inductance, refer: https://brainly.com/question/10254645
#SPJ4
what frequency of rotation, in rpm , is required to give an acceleration of 1.4 g to an astronaut's feet, if her feet are 1.1 m from the platform's rotational axis?
The frequency of the rotation having a radius of 1.1 m is 3.53 rpm
The rotational acceleration = 1.4 g
The radius of the rotation = 1.1 m
The frequency of the rotation can be found using the formula,
ω = √(α/r)
where ω is the frequency of the rotation
α is the acceleration of the rotation
r is the radius of the rotation
Let us substitute the known values in the above equation, we get
ω = √ (1.4 x 9.8 / 1.1 )
= √ (13.72 / 1.1)
= √12.47
ω = 3.53
Therefore the frequency of the rotation is 3.53 rpm
Learn more about the frequency of rotation in
https://brainly.com/question/26104992
#SPJ4
4. A meteorite travels at 15 km/s before reaching Earth's
atmosphere. Calculate how far it travels in 12 s. (Distance)
Answer:
180 km
Explanation:
velocity (v) = distance (s) / time (t)
From there we get that the distance is: s=v*t
s = 15 km/s * 12 s
s =180 km
if it is known that the toggle clamp is a machine, what assumptions can be made about it? check all that apply. (you must provide an answer before moving to the next part.)
A toggle clamp is a device that you employ, often but not exclusively as part of a production process, to firmly place components or parts in place.
Explain about toggle clamp.
A toggle clamp's main characteristics are its rapid action and ability to be easily turned on and off by an operator. Toggle clamps also lock in place firmly. Because of this, toggle clamps are frequently employed in production lines where components need to be held firmly and quickly removed during routine manufacturing procedures.
Toggle clamps with standard or light action are often constructed from components of pressed steel that have been zinc-plated.
Depending on the setting in which you work, Stainless Steel is another alternative for Toggle Clamp production. Stainless steel toggle clamps are frequently used in regulated areas where hygiene is crucial, such as the food industry and the pharmaceutical business.
To know more about toggle clamps use link below:
https://brainly.com/question/20729246
#SPJ4
What must be the units for the gravitational constant g in order for gravitational force to have units of newtons?.
To convert gravitational force into newtons sm3/(kgs2), we need to know the units again for gravitational constant g.
what is The short answer to gravity ?The force that attracts two masses to one another in physics is known as gravity. If you can believe it, every every particle of matter in the cosmos pulls on every other particle. When referring to the attraction between anything with energy or mass, the terms attraction and gravity are sometimes used synonymously.
What is so unique about gravitational force?Because it continually attempts to bring masses together and drive them apart, the gravitational force is referred to as attractive. Given that the strength of the gravitational attraction is clearly inversely correlated with the masses of the two interdependent parts, it stands to reason that larger, more galaxies will attract one another would fiercely.
To know more about gravitational force visit:
https://brainly.com/question/12528243
#SPJ4
how do we know that spheroidal stars (stars in the bulge and halo) are older, on average, than disk stars?
There are no blue spheroidal stars.
What is meant by disk stars ?Population I stars are disc stars. They are therefore relatively young stars with circular orbits in the galactic plane. They are typically rich in metal. As a result of the disk's abundance of gas and dust, vigorous star formation occurs there. The spiral arms of the galaxy are where stars develop.
There is always some matter around the star when it originates, and this material collects into a disc around the rotating star's equator. This substance can also condense into solid or gaseous structures in the form of a disc.
The researchers discovered that the thick disc of the galaxy's stars were, in fact, billions of years older than the stars observed elsewhere.
To learn more about disk star refer to :
https://brainly.com/question/29526164
#SPJ4
describe the relationship between the force and length and how the curves differ between a weak spring and a strong spring
The relationship between the force and length is given by F = -kx.
What is hooke's law?
The force a spring applies to items fastened to its ends is proportional to the distance the spring travels from its equilibrium length and is always pointed in the direction of equilibrium.
The equilibrium point of the spring's free end is at x = 0, and if the x-axis of a coordinate system is selected to be parallel to the spring, then
F = -kx.
The term "spring constant" refers to the proportional constant k.
So,
K will be large if the spring is stiff or powerful, and it will be little if the spring is weak.
According to hooke's law
ΔF / Δx = k
Slope of the graph gives "spring constant"
So,
If we consider strong spring, then curve will have high slope.
and if we consider weak spring, then the curve will have low slope.
To know more about hooke's law, check out:
https://brainly.com/question/24637789
#SPJ4
A 4. 0-kilogram object is accelerated at 3. 0 meters per second^2 north by an unbalanced force. The same unbalanced force acting on a 2. 0-kilogram object will accelerate this object toward the north at.
According to the given statement 6.0 m/s² accelerate this object toward the north at.
What is a acceleration explain?Velocity: the rate at which direction and velocity of a moving item vary over time. When something moves faster or slower, it is considered to be accelerating. Motion on a circle increases even while the speed remains constant because the vector will always be changing.
Briefing:The force is directly related to the rate of change in momentum, according to Newton's second law of motion.
F is the energy, m is the mass, and an is the acceleration, so F = ma.
F = 4 × 3
= 12 Newtons
The same force acts on a 2.0 kg object
F = ma
a = F/ m
= 12 /2
= 6.0 m/s²
To know more about Acceleration visit:
https://brainly.com/question/12550364
#SPJ4
in state-of-the-art vacuum systems, pressures as low as 1.00 10-9 pa are being attained. calculate the number of molecules in a 1.30-m3 vessel at this pressure and a temperature of 31.0°c.
Number of molecules in the vessel are n = 3.15 x [tex]10^{11}[/tex] molecules
What pressure ?A physical formula that states that the ratio of an ideal gas's measurable qualities is P (pressure) V (volume) = n (number of moles) R (the gas constant) T. (temperature in Kelvin). It is developed from a synthesis of the Boyle, Charles, and Avogadro gas laws. referred to as the universal gas law.
According to the given information
P = 1.00 x 10-9 Pa
V = 1.30 [tex]m^{3}[/tex]
Temperature T = 26° C = 299.15 K
Known
Gas constant R = 8.314 J/ moles K
Avogadro's constant N = 6.022 x [tex]10^{23}[/tex]
Solution :
PV = n RT
1.00 x [tex]10^{-9}[/tex] x 1.30 = n x 8.314 x 299.15
n = 5.23 x [tex]10^{-13}[/tex] moles
n = 5.23 x [tex]10^{-13}[/tex] x 6.022 x [tex]10^{23}[/tex]
n = 3.15 x [tex]10^{11}[/tex] molecules
Number of molecules in the vessel are n = 3.15 x [tex]10^{11}[/tex] molecules
To know more about Ideal gas
https://brainly.com/question/28257995
#SPJ4
Which of the following graphs shows the correct relationship betwveen the pressure and volume of an ideal gas at a given temperature? Note the origin corresponds to P= 0 and V= 0.
The volume and temperature graph is straight line passing through origin .
The origin corresponds to V = 0 and T = 0, the volume of gas is directly proportional to absolute temperature at constant pressure. so the volume and temperature graph is straight line passing through origin.
The cube (x3) of a unit of length represents a unit of volume in its most basic form. The cubic metre is the comparable unit of volume, for instance, if the metre (m) is chosen as the length unit (m3). [12] So, L3 is the unit dimension for volume, a SI-derived unit. [13] Metric prefixes that are strictly powers of ten are used with the metric units of volume. When prefixes are applied to volume units, which are stated as units of length cubed, the cube operators are applied to the unit of length containing the prefix. Converting from cubic centimeter to cubic meter is demonstrated by the following formula: 2.3 cm3 = 2.3 (cm)3 = 2.3 (0.01 m)3 = 0.0000023 m3 (five zeros).
Learn more about volume here:
https://brainly.com/question/17322215
#SPJ4
how far from the lens must the film in a camera be, if the lens has a 35.0-mm focal length and is being used to photograph a flower 75.0 cm away? explicitly show how you follow the steps in the lenses.
The lens should be kept at a distance of 3.67 cm from the film in the camera to be photographed and convex lens should be used.
Focal length = f = 35.0 mm = 3.5 cm
Distance at which flower is kept = p = 75 cm
The type of lens that should be used = convex
Distance at which camera should be kept = q =
= Using the lens formula
= 1/p + 1/q = 1/f
= 1/75 + 1/q = 1/3.5
= 1/q = 1/3.5 - 1/75
= q = 3.67 cm
So, the film should be kept 3.67 cm behind the convex lens.
To know more about Convex Lens:
https://brainly.com/question/15579518
#SPJ4
A meterstick of negligible mass is placed on a fulcrum at the 0. 4 m mark, with a 1 kg mass hung at the zero mark and a 0. 5 kg mass hung at the 1. 0 m mark. The meterstick is held horizontal and released. Immediately after release, the magnitude of the net torque on the meterstick about the fulcrum is most nearly.
After release, the magnitude of the net torque on the meterstick about the fulcrum is nearly 1 N middot m.
What is fulcrum?The term fulcrum refers to the point or support on which a lever rotates, or to the center of a key activity.
Given, distance between fulcrum and mark , d = 0.4 m
mass hung with fulcrum , m = 1 kg.
Value of another mass , m = 0.5 kg.
distance kept , d' = 1.0 m.
torque= F d- F1 (d1- d)
Torque = m g - m g(d1 - d)
= 1 * 9.8 * 4 - 0.5 * 9.8(1 - 0.4)
Torque = 1N
Thus, the magnitude of the torque on the meterstick about the fulcrum is nearly 1 N middot m.
To know more about fulcrum, refer
https://brainly.com/question/29566369
#SPJ4
a friend of yours is loudly singing a single note at 500 hz while racing toward you at 27.2 m/s on a day when the speed of sound is 343 m/s. what frequency do you hear?
The frequency heard by you is 6305.15 Hz.
Given that,
f₁ = 500 Hz
v₁ = 27.2 m/s
f₂ = ?
v₂ = 343 m/s
If the frequency of a wave is directly proportional to the velocity.
We know that, f = kv
where, f is frequency
k is constant of proportionality
v is velocity
k = f/v
From the above formula, we can write, f₁ /v₁ = f₂ /v₂
We have to find out f₂, f₂ = f₁ *v₂ /v₁
Substituting the values, we have,
f₂ = 500* 343/ 27.2 = 6305.15 Hz
Thus, the frequency heard by you is 6305.15 Hz.
To know more about frequency:
https://brainly.com/question/14789089
#SPJ4
the coefficient of kinetic frition between an object and the surface upon which it is sliding is 0.10. the mass of the object is 8.0 kg. what is the force of friction
The force of friction is 0.8 N.
Friction is the force that prevents motion when the surface of one object comes into contact with the surface of another.
It also has the same SI unit as other forces have as Newton (N).Frictional force can be calculated by the formula F = μ * Fnμ is the coefficient of friction between the surfaces which are in the contact.
Fn is the normal force acting on the object due to its mass.
Mass of the object = m = 8.0 kg
coefficient of kinetic friction between an object and the surface upon which it is sliding = 0.10
Frictional force = F = 8.0 * 0.10
F = 0.8 N
The force of friction is 0.8 N.
To know more about friction,
https://brainly.com/question/20912218
#SPJ4
for supersonic flow in a round duct, if the diameter increases what happens to static pressure? group of answer choices
Answer: it explodes
Explanation:
In the photoelectric effect, a stopping potential of 3.2 V is needed for radiation of wavelength 200 nm.
(a)What is the work function (in eV) of the material?
(b) What is the maximum kinetic energy (in eV) of a photoelectron emitted from a surface whose work function is 5.0 eV when illuminated by a light whose wavelength is 200 nm?
(a) The work function is 7.5(10)¹⁴ Hz.
(b) The kinetic energy of photoelectron is - 1.898 eV
The photoelectric effect consists of the emission of electrons (electric current) that occurs when light falls on a metal surface under certain conditions.
If the light is a stream of photons and each of them has energy, this energy is able to pull an electron out of the crystalline lattice of the metal and communicate, in addition, a kinetic energy.
This is what Einstein proposed:
Light behaves like a stream of particles called photons with an energy
E = h.ν ----- eq1
So, the energy E of the incident photon must be equal to the sum of the Work function Φ of the metal and the kinetic energy K of the photoelectron:
E = Φ + K ----- eq2
Where Φ is the minimum amount of energy required to induce the photoemission of electrons from the surface of a metal, and its value depends on the surface.
In case, Φ = 5eV
So, applying equation (1) in this problem:
E = hν
Where:
h = 4.136(10)⁻¹⁵ eV is Planck constant
ν is the frequency
Now the frequency has an inverse relation with the wavelength
λ = 400(10)⁻⁹ m
ν = c/λ
Being c = 3(10)⁸ m/s is the speed of light in vacuum.
ν = 7.5(10)¹⁴ Hz.
Substituting,
E = 4.136(10)⁻¹⁵ {7.5(10)⁻¹⁰}
E = 3.1 eV
Now,
3.1 eV = 5 ev + K
K = - 1.898 eV
Since a negative kinetic energy is not physically possible, the only explanation is: the conditions for a photoelectric effect were not met, hence the photoelectric effect cannot occur.
Therefore, the main condition for the occurrence of the photoelectric effect is that the energy incident photon must be greater than the work function and E > Φ
To know more about photoelectric, refer: https://brainly.com/question/26465043
#SPJ4
a 0.3175 cm sphere of glucose is placed in a water stream flowing at a rate of 0.15 m/s. the temperature of water is 25 °c. the diffusivity of glucose in water is 0.69 x 10 -5 cm2/s. estimate the mass transfer coefficient.
The mass transfer coefficient, based on the provided statement, is 6.16*10⁻¹² m/s.
What does physics mean when it refers to temperature?Temperature is a unit used to represent hotness or coolness on any of a number of scales, includes Fahrenheit and Celsius. According to temperature, heat energy will naturally move from a hotter (body with a temperature higher) to a colder (body with a temperature lower) (one at a lower temperature).
Briefing:Given,
Diameter of glucose sphere,
D = 0.3175cm
D= 0.003 m
Velocity, V = 0.15m/s
Mass diffusivity, [tex]D_{AB}[/tex] = 0.69*10⁻⁵cm²/s
For flow around sphere
[tex]\text { Sh }=\frac{K_C D}{D_{A B}}=2+0.554 Re^{1 / 2} Sc^{1 / 3}[/tex]
Sh = Sherwood number
D = diameter of sphere
[tex]k_{c}[/tex] = Mass transfer coefficient
[tex]D_{AB}[/tex] = Diffusivity
[tex]R_{e}[/tex] = DVρ/M
Diameter (D) = 0.003m
Velocity (V) = 0.15m/s
ρ = Density of water at 25°C = 996kg/m³
M = Viscosity of water at 25°C at 10⁻³ Pa
[tex]R_{e}[/tex] = 0.003*0.15*996/10⁻³
[tex]R_{e}[/tex] = 448.2
Sc = Schmidt no.
For water at 25°C
Sc = 1.6 (From thermodynamics table)
Kc * 0.003/6.9*10⁻⁸ = 2 + 0.554 ([tex]448^{1/2}[/tex])[tex](1.6^{1/3})[/tex]
4.34*10⁻¹² Kc = 26.76
Kc = 6.16*10⁻¹² m/s
This is the mass transfer coefficient.
To know more about Temperature visit:
https://brainly.com/question/28582105
#SPJ4
The complete question is-
Determine the mass transfer coefficient, kc, for the transfer from a glucose sphere, 0.3175cm in diameter, which is submerged in a 25°C aqueous stream flowing at a bulk velocity of 0.15m/s. The mass diffusivity of glucose in water at 25°C equals 0.69*10⁻⁵cm²/s.
a). Estimate the mass transfer coefficient, k₁
A star was observed to have a planet orbiting it at a distance of 1.12×108 km. The orbital period of the planet is 329 days. Calculate the mass of the star.
The mass of the star would be 9.97 x 10³⁵ Kg.
What is Star? What is centripetal force?Stars are huge celestial bodies made mostly of hydrogen and helium that produce light and heat from the churning nuclear forges inside their cores. We can write the relation absolute magnitude [M] and apparent magnitude [m] as follows : M = m + 5(log₁₀p + 1). The centripetal force is the force needed to make a body move in circular motion. It is given by : F{C} = mv²/rWe have a star was observed to have a planet orbiting it at a distance of 1.12 × 10⁸ km. The orbital period of the planet is 329 days.
Let the mass of star be [M] and that of planet be [m]. Since, the planet revolves around the star, we can write -
F{Centripetal} = F{Gravitation}
mv²/r = GMm/r²
v² = GM/r
(rω)² = GM/r
r²ω² = GM/r
ω² = GM/r³
(2π/T)² = GM/r³
M = (2π/T)² (r³)/G
M = 46.8 x (r³)/G
M = {46.8 x (1.12)³ x (10⁸)³}/{(6.6) x 10 ⁻¹¹}
M = (65.7/6.6) x (10²⁴/ 10 ⁻¹¹)
M = 9.97 x 10³⁵ Kg
Therefore, the mass of the star would be 9.97 x 10³⁵ Kg.
To solve more questions on Stars and astronomy, visit the link below-
brainly.com/question/15581414
#SPJ1
four resistors of 3.40 ohms, 6.54 ohms, 8.32 ohms, and 1.34 ohms are connected in parallel with a 12.0 v battery. find the total resistance, in ohms, of the circuit.
The circuit's overall resistance, measured in ohms, is 9.23A. when a 12.0 v battery is linked in parallel with four resistors that have resistance values of 3.40 ohms, 6.54 ohms, 8.32 ohms, and 1.34 ohms.
How can we determine the circuit's overall resistance?You add up the individual resistances to determine the total overall resistance of several resistors connected in this manner. The formula used for this is as follows: Rtotal = R1 + R2 + R3, and so forth. Example: For these three resistors connected in series, determine the total resistance.
How much resistance is there in total?The sum of each component resistance in a series circuit represents the circuit's overall resistance.
1 / Req = 1 /R1 + 1 / R2 + 1 / R3 + 1 / R4Req = 1.3ohms
Current = V / R
I = 9.23A
To know more about resistance visit:-
https://brainly.com/question/29427458
#SPJ4
A skateboarder traveling at 13.6 meters per second rolls rona stop at the top of a ramp in 2.5 seconds. What is the skateboarder’s acceleration
Answer:
Below
Explanation:
Acceleration = Δ v / Δ t = -13.6 m/s / 2.5 s = - 5.4 m/s^2
( the negative sign shows this to be a deceleration)
compared with the buoyant force of the atmosphere on a 1 liter helium filled balloon the buoyant force of the atmosphere on a nearby 1 liter solid iron block is the same. how do you explain this
The density of fluid which means air is the same for both cases, but the volume of a 1 kg helium balloon is more than the density of iron, so the buoyant force on helium is the same as the buoyant force on iron.
What is Buoyant Force?
The buoyant force is the upward push that a fluid applies to an object when it is submerged in it. The fluid's pressure on the object is what creates the buoyant force. The net upward force results from the fact that the pressure on the bottom of an item is always greater than the force on the top since pressure rises as depth increases.
What is Density?
Mass of a solid substance per unit volume.
d = M/V, where d is density, M is mass, and V is volume, is the formula for density. Grams per cubic centimetre are a typical unit of measurement for density.
Hence, it can be concluded from this that, the buoyant force on both is the same.
To know more about Buoyant force, check out:
https://brainly.com/question/11884584
#SPJ4
at sea level, at a latitude where , a pendulum that takes 2.00 s for a complete swing back and forth has a length of 0.993 m. what is the value of g in m/s 2 at a location where the length of such a pendulum is 0.960 m for period 2.00 s?
The value of acceleration due to gravity in at a location where the length of such a pendulum is 0.960 m for period 2.00 s is 9.48 m/s².
What is the period of oscillation of pendulum?
The period of oscillation of a pendulum is the time taken for the pendulum to complete one cycle.
Mathematically, the period of oscillation is given as;
T = 2π √ (L / g)
where;
T is the period of the oscillationL is the length of the pendulumg is acceleration due to gravityAt a constant period, the final equation becomes;
L₁ / g₁ = L₂ / g₂
g₂ = (g₁L₂) / (L₁)
g₂ = (g₁ x 0.96 ) / (0.993)
g₂ = 0.967 g₁
g₂ = 0.967 x 9.8 m/s²
g₂ = 9.48 m/s²
Learn more about period here; https://brainly.com/question/24255969
#SPJ1