which statement best describes the process of photosynthesis
A. it is the process of producing fruits. B. it is the process of relesing carbon dioxide C.it is the process of converting energy and producing and producing food D.it is the process of absorbing water and releasing nitrogen.

Answers

Answer 1
D is the best statement which describes the process of photosynthesis

Related Questions

what is this element

Answers

Answer:

Oxygen

Explanation:

From the question given above, the following data were obtained:

Number of electrons = 8

Number of protons = 8

Number of Neutrons = 8

Name of element =?

Next, we shall determine the atomic number of the element. This can be obtained as follow:

The atomic number of an element is simply defined as the number of protons in the atom of the element. Mathematically, it is expressed as:

Atomic number = proton number

From the question given above,

Number of protons = 8

Therefore,

Atomic number = 8

Comparing the atomic number of the element (i.e 8) with those in the periodic table, we can conclude that the element is oxygen since no two elements have the same atomic number.

The the balanced equations to: solutions of lithium sulfate and potassium phosphate are mixed together to make lithium phosphate and potassium sulfate

Answers

Answer:

[tex]3Li_2SO_4+2K_3PO_4\rightarrow 2Li_3PO_4+3K_2SO_4[/tex]

Explanation:

Hello!

In this case, when lithium sulfate and potassium phosphate solutions are mixed to yield lithium phosphate and potassium sulfate, the following chemical equation comes up:

[tex]Li_2SO_4+K_3PO_4\rightarrow Li_3PO_4+K_2SO_4[/tex]

However, as atoms are not balanced we apply the inspection method to obtain:

[tex]3Li_2SO_4+2K_3PO_4\rightarrow 2Li_3PO_4+3K_2SO_4[/tex]

Best regards!

Question (2) If your car
gets 27.8 miles to the gallon, how many liters of gasoline are necessary to travel 112 km?
This problem can be solved in short steps or in one longer step. In either case, please show your work.
Use the following conversion factors:
1 mi = 1.609 km
1 gal = 3.785 L

Answers

Answer:

9.48 L.

Explanation:

Hello!

In this case, as the problem mentions a long way to solve it, we are going to apply it because it can provide the answer more rapidly; thus, considering that 112 km are required, 1 mile equals 1.609 km and 1 gallon equals 3.785 liters, we can set up the proportional factor as shown below:

[tex]112km*\frac{1mi}{1.609 km}*\frac{1gal}{27.8mi}*\frac{3.785L}{1gal}[/tex]

Whereas km, mi and gal are cancelled out as it turns out in L; therefore the required liters are:

[tex]9.48L[/tex]

Best regards!

If 2.35 L hydrogen gas react with nitrogen gas to form nitrogen trihydride, how many grams of nitrogen will be needed for the reaction to be completed?



0.98 g


0.49 g


21.93 g


1.47 g

Answers

Answer:

1.47 g

Explanation:

How many moles are in 99.5 grams of titanium? Round your answer to the nearest hundredth. Be sure to include units.

Answers

Answer:

1000

Explanation:

99.5/ 47.87= 2.078≈2.1 mole

true or false
1. resistance provides friction to electron movement
2.high resistance will speed up electron movement
3.a circuit is an open path for electrons to move through
4. in a circuit, electrons move from the low voltage area to the higher
5. in a circuit, the light bulb is called the load

Answers

Answer:1

Explanation: friction is showing us how in the past

The mass of one gallon of water is approximately 3.78 kg or 3780 grams. How many moles are contained in one gallon of water?
a. 102
b. 210
c. 120
d. 201

Answers

Answer:

Number of moles of water = 210 mol

Explanation:

Given data:

Mass of water = 3780 g

Number of moles of water = ?

Solution:

Formula:

Number of moles = mass/molar mass

Molar mass of water = 18 g/mol

Number of moles = 3780 g/ 18 g/mol

Number of moles of water = 210 mol

Not all elements readily fit in the metal or non metal groupings. These elements are called metalloids. Examine the table below and classify W, X and Y as metals, metalloids or non-metals.

W= Lustre: Moderately high
Electrical conductivity: Low
Density: Medium
Melting point: Very high

X= Lustre: Low
Electrical conductivity: Nil
Density: Low
Melting point: Low

Y= Lustre: High
Electrical conductivity: High
Density: High
Melting point: High​

Answers

Brown luster moderately high conductivity

pLeeease help im so tired and i need to SLEEP. Answer the 1s you know
1. How does the mechanical energy of a ball that is starting to fall compare to its total energy just before it hits the floor?
2. When you stand in sunlight, what form of energy is emitted by the sun?
3. An eye doctor wants to design reading glasses that also function as sunglasses. Should the eye doctor use a reflective-transparent material or a reflective-opaque material for the lenses? Support your claim.

Answers

1. when the ball is just starting to fall, it has high potential but low kinetic energy. when it hits the floor, it has high kinetic but low potential energy
2. heat energy
3. reflective-transparent would be best, as they can reflect some light while let other light through, reflective-opaque would be useless in any circumstances because no light at all would be able to get through

Definition in your own words
Will check if you got it from online.

Word: States (Phases) of Matter

Answers

Answer:

Liquid,gas,solid and plasma

Explanation:

There four phases of matter. These phases are the gas phase(steam), the liquid phase(water), the solid phase(Ice) and finally the plasma phase(moucous).

Which of the following statements about sidestream smoke is not true?

a. It is the smoke that a smoker inhales from a cigarette.

b. It is dirtier and has a different chemical makeup than mainstream smoke.

c. It is the smoke that people around the smoker inhale.

d. It is the smoke that results from the burning end of a cigarette.

Answers

Answer: a

Explanation: the smoker actually exhales the sidestream smoke

2. Which number is not a coefficient in the equation,
2C6H14+ 19O2,-- 12CO2,+ 14H2O?

Answers

Answer:

2, 19, 12 and 14 are the coefficients.

An 8.24 gram sample of a hydrated salt is heated until it has a constant mass of 6.20 grams. What was the percent by mass of water contained in the original sample

Answers

Answer:

32.9%

Explanation:

The mass of water present in the original sample can be calculated by the substraction:

m H₂O = sample mass before heating - sample mass after heatingm H₂O = 8.24 g - 6.20 g = 2.04 g

The percent by mass of water can be calculated with the formula:

Water Mass / Original Sample Mass * 100 %[tex]\frac{2.04}{6.20}[/tex] * 100% = 32.9%

There are three states of matter: solid, liquid, and gas. is this true or false

Answers

Answer:

true

Explanation:

Solid, liquid and gases are the only three States of matter

30 POINTS HELPP PLEASE

Answers

1: selective breeding

2:traits

3: crop species

4: domestic

5: diverse

6: artificial

7: uniform

in your opinion if the answer is correct please like n mark MI s brain list

help put them in order

Answers

Answer:

hello

Explanation:

hi

Which of the following statements about tobacco use is not true?

a. Nicotine narrows blood vessels and puts added strain on the heart.

b. Smoking improves athletic performance.

c. Smoking can wreck lungs.

d. Nicotine in smokeless tobacco is addictive.

Answers

Explanation:

b and c statements are not true

if it helps you then plzz mark me brainliest

Answer:

B.) Smoking improves Athletic performance

Explanation:

Useful:
Harmful:
2. Give an example of how Bacteria can be useful and harmful to man.​

Answers

Answer:

normal flora useful

Explanation:

protect the skin

How many molecules are there in a 42.3 g sample of water, H2O?

Answers

Answer:

In order to figure out how many molecules of water are present in that  

48.90-g

sample, you first need to determine how many moles of water you have there.

As you know, a mole is simply a very large collection of molecules. In order to have one mole of something, you need to have exactly  

6.022

10

23

molecules of that something - this is known as Avogadro's number.

In order to get to moles, you must use water's molar mass. A substance's molar mass tells you the mass of one mole of molecules of said substance.

Water has a molar mass of  

18.015 g/mol

. This means that one mole of water molecules has a mass of  

18.015 g

.

So, to sum this up,  

6.022

10

23

molecules of water will amount to  

1 mole

of water, which in turn will have a mass of  

18.015 g

.

Explanation:

Water + Heat
What is proof of a Chemical Reaction?

Answers

Its water vapor bro coz the water will turn into vapor

What is exfoliation?

Answers

Answer:

Exfoliation involves the removal of the oldest dead skin cells on the skin's outermost surface. Exfoliation is involved in all facials, during microdermabrasion or chemical peels. Exfoliation can be achieved by mechanical or chemical means.

Explanation:

I did copy off internet!

:P

can someone help I don't understand how to find the amount for the name.​

Answers

Answer:

A) 6.023*10^23

B)6.023*10^22

Explanation:

AVAGADRO it would take nearly 1 mole of chalk so

1 mole of any substance contain 6.023*10^23 particles.

AVAGADRO it would take nearly 1 mole of ink to print so

1 mole of any substance contain 6.023*10^23 particles.

question: convert 22.63 miles of oxygen to volume

very urgent

Answers

Answer:

506.912 L

Explanation:

From the question given above, the following data were obtained:

Number of mole of O₂ = 22.63 moles

Volume of O₂ =?

Recall:

1 mole of a gas occupy 22.4 L at STP.

With the above information, we obtained the volume occupied by 22.63 moles of O₂ as follow:

1 mole of O₂ occupied 22.4 L at STP.

Therefore, 22.63 moles of O₂ will occupy = 22.63 × 22.4 = 506.912 L at STP.

Thus, 22.63 moles of O₂ is equivalent to 506.912 L.

yo please help. There is an image PLEASE... HELP... MEEEEE

Answers

Answer:

9. B different sounds the dog is exposed to

10. control, dependent, control, control, independent

Explanation:

what happens when copper sulphate reacts with hydrogen
sulphide?​

Answers

Answer:

When hydrogen sulphide gas is passed through a blue solution of copper sulphate, a black precipitate of copper sulphide is obtained and the sulphuric acid so formed remains in the solution. In this reaction, cupric ions (from copper sulphate) combine with sulphide ions (from hydrogen sulfide) to form cupric sulphide.

Answer:

When hydrogen sulphide gas is passed through a blue solution of copper sulphate, a black precipitate of copper sulphide is obtained and the sulphuric acid so formed remains in the solution. In this reaction, cupric ions (from copper sulphate) combine with sulphide ions (from hydrogen sulfide) to form cupric sulphide.

Explanation:

I NEED THIS TODAY, PLEASE HELP.
Write the following elements in decreasing ionic size. Li+, C4+, F-, O2-

70 POINTS

Answers

Answer:

Li+, C4+, O2-, and then F- They're written in decreasing ionic size.

Explanation:

Ionic size means the same thing as ionic radius.  Furthermore, Ionic radius is the distance away from the central atom. Ionic radius increases going from top to bottom and decreases across the periodic table.

Lithium is in the 1st family/group with a charge of +1.  So it has the biggest ionic radius.

Carbon is in the 4th family/group with a charge of +4. So it has a smaller ionic radius than Lithium.

Oxygen is in the 6th family/group with a charge of -2.  So it has a smaller ionic radius than Carbon.

Lastly, Fluorine is in the 7th family/group with a charge of -1. So it has a smaller ionic radius than Oxygen.

What is the term used to describe a phase change from liquid to solid?​

Answers

When a liquid changes into a solid, it is called solidification. When a gas changes into a solid, it is called deposition . When a liquid changes into gas, it is called evaporation. Phase changes are usually caused by changes in temperature or pressure.

Other Questions
Harris runs 12 miles in 2 hours at a steady pace. At this same pace, how far can he run in 45 minutes? if you got a 23/25 on a quiz, what is your grade? How do you determine that? Explain how the issues of states' rights and nullificationaffected the nation during the Age of Jackson. SO I NEED HELP WITH RESEARCH AND I DON'T KNOW HOW TO DO GOOD RESEARCH PLZ GIVE SOME IDEAS AND THE TOPIC IS A PROSTHETIC HAND FOR MY SCIENCE PROJECT ANSWER IF U CAN THANK U! PLS HELP ME IT IS SO HARD What are the differences you can see when you compare the nucleons of a dividing cell with that of a non dividing cell Ben is shopping for tires for his car. After looking at several stores, he decides to purchase his tires from All About Tires. The cost of their tires is shown in the table below. Study the table below... All About Tires... Number of Tires... X... Total Cost... Y... ... 2, $62... ... 3, $93... ... 7, $217... ... 9, $279.... Based on the information in the table, how much will Ben pay for 4 tires? Pls answer my question and explain. Thanks in advance.P.S. If you explain ur answer I will mark u brainiest. Southemers who owned slaves made up __of the population a. 5%b. 30%c. 25%d.10% Given that points A, B, and C are the midpoints of their respective sides, which of the following is true about the figure?Question 2 options:A) B) BCZ YABC) D) ZYX ABC What is a major theme in Romeo & Juliet? What does the map tell us about the population of the United States in 1790? Choose all that apply.the total number of persons living in citiesthe states that made up the US in 1790cities with populations between 10,000 and 250,000 personsthe race and gender composition of the population the total number of people living in the US Thinking The dot plot showspredictions for the winning time in a 200-metersprint. The winner finished the race in 22.3 seconds.Find the greatest percent error for a predictionto the nearest tenth of a percent. Justify youranswer. Tiene Ud. hermanos? S, tengo _____ una hermana. A. con B. Leave as-is; nothing belongs in the blank. C. de D. a The Pythagorean theorem is a2+b2=c2. Solve for b. Can someone plz help with putting the rationales in order from greatest to least I will really appreciate it !!! anyone who is really good at teaching french?i need urgent help. One less than three times a number PLZ HELP!!! I WILL GIVE YOU BRAINLIEST!!!! 100 POINTS!!!!!!!!!!!! In The True Confessions Of Charlotte Doyle Book !!!!!!!!!Imagine that you could give one character in the novel advice to help him or her in the story. Whom would you choose, what would you tell him or her, and why? In a short journal entry of about 150 words, and using details from the novel, describe your advice and explain how it would help the character. Explain how you could decrease the thermal energy of a can of soup you just took out of the pantry.