Which shows a triglyceride?

Answer: 2.23 is the difference.

Explanation: Sodium has an electronegativity of 0.93 and Chlorine has an electronegativity of 3.16, so when Sodium and Chlorine form an ionic bond, in which the chlorine takes an electron away from sodium, forming the sodium cation, Na+, and the chloride anion, Cl-.

Answer:  Okay so i don't know how i can explain this but.. OK so Steven placed an ice cream scoop right? and put it under hot water so i would say it would make the ice cream scoop hot? and then using it to scoop the ice cream i could say it would be a melting affection i think

Explanation:

im am so sorry pls forgive me is i am wrong i tried my best so at least give me a like for effort.. i hope u have a great day :)

Answer:

Mg + 2 HCl ⇒ MgCl₂ + H₂

10.1 L

Explanation:

Step 1: Write the balanced equation

Mg + 2 HCl ⇒ MgCl₂ + H₂

Step 2: Calculate the moles corresponding to 10.0 g of Mg

The molar mass of Mg is 24.31 g/mol.

10.0 g × 1 mol/24.31 g = 0.411 mol

Step 3: Calculate the moles of H₂ produced from 0.411 moles of Mg

The molar ratio of Mg to H₂ is 1:1. The moles of H₂ produced are 1/1 × 0.411 mol = 0.411 mol

Step 4: Calculate the volume occupied by 0.411 moles of H₂

0.411 moles of H₂ are at 1.00 atm and 25 °C (298 K). We can calculate the volume occupied using the ideal gas equation.

P × V = n × R × T

V = n × R × T / P

V = 0.411 mol × (0.0821 atm.L/mol.K) × 298 K / 1.00 atm = 10.1 L

Answer:

Antarctic Peninsula, is one of the most important fossil sites on Earth.

hope this helps you ☺️☺️

Fossils that would be expected to be found in Antarctica from more recent times, after it had moved much closer to the South Pole is Antartica peninsula.

Fossils are the preserved remains, impression, or trace of any once-living thing from many years ago. Examples of the fossils include bones, shells, exoskeletons, stone imprints of animals or microbes, objects preserved in amber, hair, petrified wood and DNA remnants.

There are four different types of fossils-

Mold fossils

Cast fossils

Trace fossils or Ichnofossils

True form fossils

Imprints, tracks, and trails can also become fossilized and are called Trace fossils. Dinosaur footprints or worm burrows are the examples.

Living things when get decomposed from the so many years ago and become dirt and rocks are fossils.

Therefore, Fossils that would be expected to be found in Antarctica from more recent times, after it had moved much closer to the South Pole is Antartica peninsula.

Learn more about Fossils, here:

https://brainly.com/question/14988327

#SPJ3

Answer:

increase answer

Explanation:

i hope that is right

Answer:

A

Explanation:

A scientist is a person who conducts scientific research to advance knowledge in an area of interest.

In classical antiquity, there was no real ancient analog of a modern scientist. Instead, philosophers engaged in the philosophical study of nature called natural philosophy, a precursor of natural science. It was not until the 19th century that the term scientist came into regular use after it was coined by the theologian, philosopher, and historian of science William Whewell in 1833.

examples are

Answer:

3mL of 5M NaOH must be added to adjust the pH to 7.20

Explanation:

When NaOH is added to phosphoric acid, H₃PO₄, the reaction that occurs are:

NaOH + H₃PO₄ ⇄ NaH₂PO₄ + H₂O pKa1 = 2.15

NaOH + NaH₂PO₄ ⇄ Na₂HPO₄ + H₂O pKa2 = 7.20

NaOH + Na₂HPO₄ ⇄ Na₃PO₄ + H₂O pKa3 = 12.38

We can adjust the pH at 7.20 = pKa2 if NaH₂PO₄ = Na₂HPO₄. To make that, we must convert, as first, all H₃PO₄ to NaH₂PO₄ and the half of NaH₂PO₄ to Na₂HPO₄. To solve this question we need to find the moles of phophoric acid in the initial solution. 1.5 times these moles are the moles of NaOH that must be added to fix the pH to 7.20:

Moles H₃PO₄:

100mL = 0.100L * (0.100mol / L) = 0.0100 moles H₃PO₄

Moles NaOH:

0.0100 moles H₃PO₄ * 1.5 = 0.0150 moles NaOH

Volume NaOH:

0.0150 moles NaOH * (1L / 5moles) = 3x10⁻³L 5M NaOH are required =

3 mL of 5 Molar NaOH is required to adjust the pH of phosphoric acid.

It is the negative log of the concentration of Hydrogen ions in the solution.

To calculate the volume of NaOH first, calculate the moles of NaOH and H₃PO₄.

Moles of H₃PO₄.

[tex]\rm moles \ of \ H_3PO_4 = 100\rm \ mL = 0.100\rm \ L \times (0.100 \ mol / L)\\\\\rm moles \ of \ H_3PO_4 = 0.01[/tex]

The moles of NaOH:

[tex]\rm Moles \ of \ NaOH =0.01 \ moles \ H_3PO_4\times 1.5 \\\\\rm Moles \ of \ NaOH= 0.0150[/tex]

The volume of NaOH:

[tex]\rm Volume\ of \ NaOH = \rm 0.0150\ moles\ NaOH \times (1 \ L / 5 \ moles) \\\\\rm Volume\ of \ NaOH = 3\times 10^{-3} L[/tex]

Therefore, 3 mL of 5 Molar NaOH is required to adjust the pH of phosphoric acid.

Learn more about pH:

https://brainly.com/question/3262317

Answer:

The reaction will proceed to the right to attain the equilibrium.

Explanation:

Step 1: Write the balanced equation

2 N₂(g) + 3 H₂(g) = 2 NH₃(g)

Step 2: Calculate the reaction quotient

The reaction quotient (Qc) is calculated in the same way as the equilibrium constant (Kc) but it uses the concentrations at any time.

Qc = [NH₃]² / [N₂]² × [H₂]³

Qc = 8.00² / 1.50² × 1.00³ = 28.4

Since Qc ≠ Kc, the reaction is not at equilibrium.

Since Qc < Kc, the reaction will proceed to the right to attain the equilibrium.

Answer:

C. 2Fe + 3Cl2 + 2FeCl3

Explanation:

Hello there!

In this case, according to the given chemical reaction:

Fe + Cl2 → FeCl3

It turns out possible to balance it via cross-multiplying the chlorine atoms as they do not result from a whole number multiplication; it means we get:

Fe + 3Cl2 → 2FeCl3

And we just balance Fe by placing a 2 on Fe:

2Fe + 3Cl2 → 2FeCl3

Thus, the answer is C. 2Fe + 3Cl2 + 2FeCl3  

Regards!

Answer:6CO2/1C6H12O6

Explanation:

Answer:

[Kr] 4d4 5s1

Explanation:

Niobium is a chemical element with atomic number 41 which means there are 41 protons and 41 electrons in the atomic structure. The chemical symbol for Niobium is Nb. Neutron Number and Mass Number of Niobium Mass numbers of typical isotopes of Niobium are 93.

Name of Element : Niobium

Atomic Weight : 92.9

Atomic Number : 41

Group : Transition Elements

Electron Configuration: 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d3

Answer:

O homogeneous mixture

Explanation:

When Kci is dissolved in water it becomes a solute in O homogeneous mixture

Answer:

This really depends on what you belive in honestly, as a christian i belive a supreme being created all but school says something happend with bacteria and evolution or something lol. If this was a serious question and you need an answer for school just search up the evolution theory

Explanation:

Answer:

Precipitation reactions are ones in which at least one of the reactants is in the aqueous phase (i.e., dissolved in water), and a solid forms on the product side which was not present on the reactant side. If all the reactants are solid, then a solid product forming should not be called a precipitate. To be called a precipitate, an insoluble product must form from within solution, either from a solid and solute interacting, or from an interaction strictly between solutes.

Explanation:

Answer:

element has this explanation and is actually the smallest unit with chemical properties

Answer:

The solubility of gases decreases with pressure as that of solids and liquids is not affected.

Answer:

1.0 mole

Explanation:

From the question given above, the following data were obtained:

Volume (V) = 5 L

Temperature (T) = 205 K

Pressure (P) = 340 KPa

Gas constant (R) = 8.31 KPa.L/Kmol

Number of mole (n) =?

Using the ideal gas equation, the number of mole of the gas in the container can be obtained as follow:

PV = nRT

340 × 5 = n × 8.31 × 205

1700 = n × 1703.55

Divide both side by 1703.55

n = 1700 / 1703.55

n = 1.0 mole

Thus, the number of mole of the gas in the container is 1.0 mole

Answer:

Kind of like DNA or a part of DNA

Explanation:

They are what make you a person, no they aren't the same

Answer:

Substances over 7 are categorized as basic, with 7 being the neutral point. Water has a pH level of 7. Substances with pH levels under 7 are categorized as acidic. Vinegar is acidic.

Explanation:

You can change it a little if you want. Hope this helps!

Vinegar is acidic. The only vinegar that has alkaline is apple cider vinegar, but all types of vinegar are acidic.

Answer:

7.3125grams

Explanation:

Molarity is the measure of the molar concentration of a solution. It can be calculated using the formula as follows:

Molarity = number of moles (n) ÷ volume (V)

Based on the information given,

Molarity = 1.25 M

Volume = 100 mL = 100/1000 = 0.1 L

Molarity = n/V

1.25 = n/0.1

n = 1.25 × 0.1

n = 0.125mol

Using the below formula to calculate the mass of NaCl;

mole = mass/molar mass

Molar mass of NaCl = 23 + 35.5 = 58.5g/mol

0.125 = mass/58.5

mass = 0.125 × 58.5

mass = 7.3125 grams

Answer:

bugging milftoon comic milftoon comic milftoon cimicd how many to summon a transgender milftoon cimicd how

Answer:

B

Explanation:

When two distinct elements are chemically combined—i.e., chemical bonds form between their atoms—the result is called a chemical compound. Most elements on Earth bond with other elements to form chemical compounds, such as sodium (Na) and Chloride (Cl), which combine to form table salt (NaCl).

MARK AS BRAINLEST!!

Answer:

Please find the report on the comet below

Explanation:

Specifically in the year 1993, a comet was discovered by three individuals namely: Eugene Shoemaker, Carolyn Shoemaker, and David Levy. The comet was named after the first discoverers as; Shoemaker-Levy 9.

Shoemaker-Levy 9 was reported to have already been in pieces as at the time of discovery. It was believed to have been torn apart by the gravitational force emanating from the biggest of the planets called JUPITER.

In July 1994, Shoemaker-Levy 9 came in contact with Jupiter in what seemed to be the end of the discovered comet. This collision of Shoemaker-Levy 9 with planet Jupiter was said to be the first ever solar systems collision observed.

Answer:

0.244 M.

Explanation:

From the question given above, the following data were obtained:

Molarity of stock solution (M₁) = 1 M

Volume of stock solution (V₁) = 0.305 L

Volume of diluted solution (V₂) = 1.25 L

Molarity of diluted solution (M₂) =?

The molarity of the diluted solution can be obtained by using the dilution formula as illustrated below:

M₁V₁ = M₂V₂

1 × 0.305 = M₂ × 1.25

0.305 = M₂ × 1.25

Divide both side by 1.25

M₂ = 0.305 / 1.25

M₂ = 0.244 M

Thus, the molarity of the diluted solution is 0.244 M

We are given:

Initial Temperature = 90°c

Final Temperature = 120°c

Heat applied(ΔH) = 500 Joules

Specific heat(c) = 0.9 Joules / g°C

Mass of Aluminium(m) = ?

Change in temperature:

ΔT = Final temp. - Inital Temp.

ΔT = 120 - 90

ΔT = 30°c

Calculating the mass:

We know the formula:

ΔH = mcΔT

replacing the values:

500 = m(0.9)(30)

500 = m(27)

m = 500/27

m = 18.52 grams

Answer:

K2S(aq) + BaCl2(aq) = 2KCl(aq) + BaS(s)

In the image attached, it is explained how the solution is balanced.

The number of atoms of any element in the given chemical formula is the number that is written on the foot of the symbol of that element. The   balanced equation is

K[tex]_2[/tex]S(aq) + BaCl[tex]_2[/tex](aq)[tex]\rightarrow[/tex]2KCl(aq) + BaS(s)

Balanced equation is the one in which the total number of atoms of a species on reactant side is equal to the total number of atoms on product side.

The unbalanced equation is

K[tex]_2[/tex]S(aq) + BaCl[tex]_2[/tex](aq) [tex]\rightarrow[/tex]KCl(aq) + BaS(s)

The number of atoms of K on reactant side is 2 while on product side it is 1, so to balance K we need to multiply KCl by 2

K[tex]_2[/tex]S(aq) + BaCl[tex]_2[/tex](aq) [tex]\rightarrow[/tex]2KCl(aq) + BaS(s)

The atoms of sulfur on reactant and product side is 1, so it is balanced.

The atoms of Ba on reactant and product side is 1, so it is balanced.

The atoms of Cl on reactant and product side is 2, so it is balanced.

Therefore the balanced equation is

K[tex]_2[/tex]S(aq) + BaCl[tex]_2[/tex](aq)[tex]\rightarrow[/tex]2KCl(aq) + BaS(s)

Learn more about the balanced equation, here:

https://brainly.com/question/7181548

#SPJ2

Answer:

Attached below is the required diagram .

Explanation:

During the reaction of resorcinol and ethyl acetoacetate there is the production of a transesterification product, and this transesterification product is produced in other to increase the electrophicilty of the carbonyl center.

Attached below is the required diagram .

Answer: 6.04 g

Explanation: In STP conditions, amoint of substance

n = V / Vm = 4.23 l / 22.41 l/mol = 0.188755 mol

Molar mass M(O2) = 32 g/mol  and

mass m = nM

Answer:

1 - Salts required  that can be compared directly, using Ksp values, to estimate solubilities for copper (II) sulfide are - [tex]CaSO_3[/tex] (Option b) ,[tex]BaCrO_4[/tex] (Option c) and [tex]CaS[/tex] (Option d)

2 - Salts  that can be compared directly, using Ksp values, to estimate solubilities for zinc hydroxide are - [tex]Mg(OH)_2[/tex] (Option a)

Explanation:

[tex]K_s_p[/tex] values can be used to compare the solubility of salts that produce ions in a 1:1 ratio.

Because the salts [tex]CaSO_3[/tex] , [tex]BaCrO_4[/tex] and [tex]CaS[/tex]  have a 1:1 ion ratio, the solubilities of options b, c, and d can be compared to salt 1.

[tex]K_s_p[/tex] Values can be used to compare the solubility of salts that produce ions in a 1:2 or 2:1 ratio.

  2. [tex]Zn(OH)_2[/tex] dissociates into ions in ratio 1:2 .

Because the ions in the salt [tex]Mg(OH)_2[/tex] are in a 1:2 ratio, the solubility of salt 2 can be compared to that of salt 'a'.

Hence , Salt 1 is matched with options b , c , d.

              Salt 2 is matched with option a.