Answer:
A film badge
Explanation:
The film badge dosimeter or film badge is a personal dosimeter used for monitoring cumulative radiation dose due to ionizing radiation. It of a photographic film and a holder. This film badge is used to determine or measure and record the radiation exposure as a result of radiations, x-rays, gamma rays and also beta particles.
All users of medical x-ray equipment (C-arms, fluoro units, therapy units) must wear badges. Those using larger quantities of radioactive materials will also be provided badges. The correct option is A.
What is film badge?Ionising radiation exposure is measured using photographic film for personnel monitoring purposes. A filter that protects part of the film from particular types of radiation may also be present in the film badge, which may contain two or three films with varying sensitivity levels.
A particular kind of passive dosimeter is the film badge. It comprises of a photographic emulsion film in a light-tight wrapping (kept in a holder) that changes optical density in response to ionising radiation. The holder, which also includes several filters (for calculating tissue equivalent amounts), is typically worn on the body's trunk.
So film badge is the device used most commonly today for monitoring the radiation exposure of personnel.
Thus the correct option is A.
To know more about film badge, visit;
https://brainly.com/question/14019863
#SPJ7
please mark all that apply!
Answer:
F G there you go the guy on top is right
Explanation:
F G
the molar mass of CCI2F2
Answer:
The molar mass and molecular weight of CCI2F2 is 315.8271.
Explanation:
what is the best definition of energy?
A. The capacity to measure heat.
B. The capacity to measure mass
C. The capacity to exert strength
D. The capacity to do work
Answer:
D. the capacity to do work
Explanation:
the basic definition of energy is the ability to do work
Lee and some other students working with Dr. Yung were conducting an experiment and ended up with some confusing results. In the experiment, each student combined sodium and hydrogen chloride, but, as shown in the table below, each student ended up with different results. Lee is trying to determine what happened.
In a few minutes, you will see a video of what happened when Lee combined two substances. Before you watch the video, see if you can predict why each student ended up with different results.
Student's name Starting substances Ending substances
Lee sodium and hydrogen chloride hydrogen and sodium chloride
Vera sodium and hydrogen chloride hydrogen, sodium chloride, and sodium
Domingo sodium and hydrogen chloride hydrogen, sodium chloride, and hydrogen chloride
Why do you think Vera and Domingo ended up with three substances after the chemical reaction while Lee only ended up with two?
Answer:
chung long
Explanation:
cause 3 plus 2 =9
A metal object with mass of 29.0 g is heated to 97.0 °C and then transferred to an insulated container containing 95.8 g of water at 20.5 °C. The water temperature rises and the temperature of the metal object falls until they both reach the same final temperature of 23.7 °C. What is the specific heat of this metal object? Assume that all the heat lost by the metal object is absorbed by the water.
Answer:
0.603J/g°C is the specific heat of the metal object
Explanation:
To solve this question we must know the heat given by the metal is equal to the heat absorbed by the water. The change in heat follows the equation:
Q = m*S*ΔT
Where Q is heat in Joules, m is the mass of the substance, S its specific heat and ΔT change in temperature
The equation to solve the problem is:
m(Object)*S(Object)*ΔT(Object) = m(Water)*S(Water)*ΔT(Water)
Where:
m(Object) = 29.0g
S(Object) = ??
ΔT(Object) = (97.0°C - 23.7°C = 73.3°C)
m(Water) = 95.8g
S(Water) = 4.184J/g°C
ΔT(Water) = (23.7°C - 20.5°C = 3.2°C)
29.0g*S(Object)*73.3°C = 95.8g*4.184J/g°C*3.2°C
S (Object) * 2125.7g°C = 1282.6J
S(Object) = 0.603J/g°C is the specific heat of the metal object
4. There are 1.9 moles of Oxygen gas at a pressure of 3.50 atm, and the temperature is 65°C. What is the
volume of the gas? Remember that R = 0.0821 L x atm/Kx mol AND that you must convert °C to K.
Fill in the variables chart:
Answer:
15.06 L
Explanation:
Using the ideal gas law equation:
PV = nRT
Where;
P = pressure (atm)
V = volume (L)
n = number of moles (mol)
R = gas law constant (0.0821 Latm/molK)
T = temperature (K)
According to the information provided in this question,
P = 3.50 atm
n = 1.9 moles
V = ?
T = 65°C = 65 + 273 = 338K
Using PV = nRT
V = nRT/P
V = (1.9 × 0.0821 × 338) ÷ (3.5)
V = 52.725 ÷ 3.5
V = 15.06 L
What is the pOH of a solution of pH 3 acid? (Kw= 1.0 x 10-14)
Answer:
pOH = 11
Explanation:
The pH is an unit of concentration widely used in chemistry to find the quality of a solution.
To solve this question we must, as first, find the [H+] using the pH:
[H+] = 10^-pH
[H+] = 10^-3
Now, using kw:
kw = 1.0x10-14 = [H+] [OH-]
1.0x10-14 = [10^-3] [OH-]
[OH-] = 1.0x10-11
pOH = -log [OH-]
pOH = 11What does a nucleus look like
Answer:
Explanation:
The nucleus is an organelle found in eukaryotic cells. Inside its fully enclosed nuclear membrane, it contains the majority of the cell's genetic material. This material is organized as DNA molecules, along with a variety of proteins, to form chromosomes.
Which of the following processes
release energy?
A. Water evaporating
B. Ice melting
C. steam condensing
D. wax melting
you can test carbon dioxide gas with
Answer:
you can test carbon dioxide gas with calcium hydroxide
hope this is what you're looking for
stay safe and have a nice day
✌◕ ◡ ◕✌
Which process is represented by the label a?
Answer:
Sediment to sedimentary rock (and vice versa) is Compactation and Cementation.
Explanation:
This happens via Lithification, which is the compacting of sediments under pressure.
What is the correct name for the chemical formula N408?
Answer:
molar mass (molar weight)
Explanation:
21.) This substance consists of two or more nonmetal elements in a fixed ratio.
a.) element
b.) mixture
c.) molecule
d.) compound
Answer:
Molecule
Explanation:
when two or more than two non-metal elements are combined then it form Molecule.
ALL THE THINGS YOU SAID ALL THE THINGS YOU SAID RUNING THROUGH MY HEAD RUNNING THROUGH MY HEAD HELPPPP
Answer:
Gamma rays and X-rays
Explanation:
All the things she said
All the things she said
Running through my head
Running through my head
Running through my head
All the things she said
All the things she said
Running through my head
Running through my head
All the things she said
This is not enough
This is not enough
One of your classmates asks you why an ice cube melts in water. Which of the following
would be your best explanation?
a.) The ice cube transfers energy to the air.
b.) The ice cube transfers energy to the water.
c.) Energy is transferred from the ice to the water and from the water to the ice.
d.) The water transfers energy to the ice cube.
Answer:
the answer is B
Explanation:
the ice puts 8ts cold into the water taking it away from the ice
based on the graph below, which statement
Answer:
4. Atmospheric pressure decreases as altitude increases.
Explanation:
hope this helps and is right. p.s i really need brainliest :)
The reaction of an acid and a base will always produce what kind of salt?
A.
a combination of the cation from the acid and the anion from the base
B.
a combination of the cation from a strong base and the anion from a weak acid
C.
neutral salts from the cation of a strong base and the anion from a weak acid
D.
basic salts from the cation of a strong base and a strong acid
E.
depends on the strength of the acid and the base
Explanation:
E maybe i am not sure or C
Is all the biomass consumed by a primary consumer, such as a brine shrimp, transferred to the secondary consumer, such as a gull, when the brine shrimp is eaten? For instance, if a brine shrimp eats 10 g of algae in its life before the gull eats it, does the gull get 10 g of biomass when it eats the brine shrimp? Why or why not?
what is acid? Explain it
Answer:
An acid is a chemical that is posining or sometimes not
Explanation:
This is the best I could explain brainliest
Need help ASAP ( will give 50 points)
Select the correct answer. Which galaxies have light smoothly spread across the
galaxy? A. spiral galaxy B. irregular galaxy C. lenticular galaxy D. elliptical galaxy
Answer:
Your answer would be D, Hope this helps.
HELP PLEASE
1. Locations where volcanoes form far from plate boundaries are called
A. islands
B. hot spots
C. divergent zones
Which of the following phase changes describes what is
happening in the following endothermic process?
H20 (1) + heat --> H2O (g)
O melting
o freezing
o boiling
O condensing
Answer:
I think the answer is boiling
Polar bears are adapted to stay warm by growing thick fur. These organisms most likely live in a what
Answer:
They live in the open snow
Explanation:
pls help me guys please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please please
5) B
6) C
7) B newland, law of octaves
8) A)
29.) What charge would you expect from a Group 1 atom when it becomes an ion?
a.) 2-
b.) 2+
c.) 1-
d.) 1+
Answer:
d
Explanation:
It is 1+ because when the periodic table is drawn well into there groups become cations
3. Which model has properties most similar to chlorine?
Model A
Model B
Model C
Model D
Answer:
bnsjsbbakakaisbsbwnsjznss
Explanation:
cnsjzjsnsnsjs ssnsnsnzksmnznnzna
How GM food are produced?
What is genetic modification (GM) of crops and how is it done? GM is a technology that involves inserting DNA into the genome of an organism. To produce a GM plant, new DNA is transferred into plant cells. Usually, the cells are then grown in tissue culture where they develop into plants.
Answer:
GM is a technology that involves inserting DNA into the genome of an organism. To produce a GM plant, new DNA is transferred into plant cells. Usually, the cells are then grown in tissue culture where they develop into plants. The seeds produced by these plants will inherit the new DNA.
To determine the molar mass of an element, one must know the element's
a. number of isotopes.
b average atomic mass
c avogradro constant
d atomic number
Answer:
d
Explanation:
from you know the atomic number it should be easy to find
To determine the molar mass of an element, one must know the element's atomic number. Therefore, option D is correct.
What is the atomic number ?An element's atomic number (Z) is the number of protons in the nucleus of each atom of that element. This means that the number of protons is the feature that distinguishes each element from all others. Elements differ based on their atomic number.
Because the combined masses of protons and neutrons account for nearly all the mass of a given atom, the atomic mass of a single atom can be calculated by adding the total number of protons and neutrons of that particular isotope.
The atomic mass of any element on the periodic table can be used to calculate its molar mass.
Thus, option D is correct.
To learn more about an atomic number, follow the link;
https://brainly.com/question/16858932
#SPJ6
explain how lithium atom is positive charge
How many grams of water are produced when 12.50 mol oxygen reacts with hydrogen?
Answer: According to reaction below, when one mol of oxygen reacts with two mol of hydrogen, two mol of water is produced. Thus, when 2.5 mol of oxygen reacted with hydrogen, 2 * 2.5 mol = 5 mol of water is produced. The molar mass of water is 18 g/mol.
Explanation:
Not My WORK! I got this info from another site. BUT I HOPE IT HELPS :)