100 POINTS!!!
Which condition is NOT necessary for a hurricane to form?
warm ocean waters
very low air pressure
high air pressure
warm, moist air rising
Answer:
very low air pressure and that's not 100 points
The speed of light in air is 3 x 108 m/s. The speed of light in ice is 2.29 x 108 m/s. What is the refractive index from air to ice?
Answer:
η = 1.31
Explanation:
The formula for the refractive index of from air to some other medium is given by the following formula:
[tex]\eta = \frac{c}{v}\\[/tex]
where,
η = refractive index = ?
c = speed of light in air = 3 x 10⁸ m/s
v = speed of light in ice = 2.29 x 10⁸ m/s
Therefore, using these values in the equation we get:
[tex]\eta = \frac{3\ x\ 10^8\ m/s}{2.29\ x\ 10^8\ m/s} \\[/tex]
η = 1.31
A 500 kg car traveling at 20 m/s rear ends another car of 600 kg at rest. The collision is great enough that the two cars stick together after they collide. How fast will both cars be going after the collision?
Answer: its 50
Explanation:
im waffling does anybody have syrup
You plan to visit a friend who lives 30 miles away. You predict that your average speed for this trip will be 50 miles per hour. How long will your trip take?
0.4 hours (24 centimeters)
0.8 hours (48 centimeters)
0.6 hours (36 minutes)
1.66 hours (~100 minutes)
Answer:
.6 hours
Explanation:
to find time you divide distance by speed
The four balls in the diagram below are made of the same material are sold
Why is the force of gravity between the balls in pair 2 greater than the force of gravity between the balls in pair 1
The balls in pair 2 are closer together than the balls in part 1
The balls in pair 2 have a grater mass than the balls in pair 1
The balls in pair 1 have more rolling friction than the balls in pair 2
The balls in pair 2 have more magnetic force than the balls in pair 2
Answer:
The balls in Pair 2 have a greater mass than the balls in pair 1.
Explanation:
I took the test.
At which point on this graph do reactants begin to produce products as they collide?
Answer:b
Explanation:
i just did the quiz i was look for it too then got it
The point on this graph do reactants begin to produce products as they collide is B.
What is chemical reaction?The chemical reaction is the reaction between two reactants which led to the formation of products.
The products are substances which forms after reaction. The reactants are the substances which are original materials.
This graph shows how the reactants are reacted and products are formed in a chemical reaction.
As the reaction proceeds, the potential energy is higher when reactants begin to produce products.
Thus, the point on this graph do reactants begin to produce products as they collide is B.
Learn more about chemical reaction.
https://brainly.com/question/22817140
#SPJ5
A construction worker transfers 6000000 J in a n 8 hour day of work. What is their average power output? just need a quick answer with the working, thanks
Answer:
208.33 W
Explanation:
Using,
P = W/t.......................... Equation 1
P = Average power output, W = total work, t = total time.
From the question,
Given: W = 6000000 J, t = 8 hours = (8×60×60) = 28800 s
Substitute these values into equation 1
P = 6000000/28800
P = 208.33 W.
Hence the average power output is 208.33 W
HELP YALL!!
Which nucleus completes the following equation?
Answer:
B
Explanation:
Chlorine institute
16+1=17
CI has 17 in the bottom.
Answer:C
Explanation:
Brainliest for correct answer :)
In which circuit will the bulb or bulbs glow brightest?
a-A simple circuit with one bulb and one battery
b-A simple circuit with one bulb and two batteries
C-A simple circuit with two bulbs and one battery
Answer:
B - a simple circuit with one bulb and two batteries.
The circuit that would glow brightest is b - A simple circuit with one bulb and two batteries
Electric circuitThis is the path for transmitting current. It usually consists of an electrical energy source and an electrical load.
In any circuit, the electrical power available is determined by the number of batteries available (energy source) and thus the current.
Ohm's lawSince we know according to Ohm's law V = iR where
V = voltage, i = current and R = load.So, making i subject of the formula, we have i = V/R .
So, i ∝ 1/R this shows that the current is inversely proportional to the load.
Circuit that would glow brightesta simple circuit with more current and less load would glow brightest. So, having a simple circuit with two batteries increases the current in the circuit and having only one bulb means that there is less load in the circuit. Thus, the circuit with one bulb and two batteries will glow brightest.So, the circuit that would glow brightest is b - A simple circuit with one bulb and two batteries
Learn more about electric circuit here:
https://brainly.com/question/19651288
When jumping straight down, you can be seriously injured if you land stiff-legged. One way to avoid injury is to bend your knees upon landing to reduce the force of the impact. A 84.0-kg man just before contact with the ground has a speed of 6.82 m/s. (a) In a stiff-legged landing he comes to a halt in 4.56 ms. Find the magnitude of the average net force that acts on him during this time. (b) When he bends his knees, he comes to a halt in 0.254 s. Find the magnitude of the average net force now. (c) During the landing, the force of the ground on the man points upward, while the force due to gravity points downward. The average net force acting on the man includes both of these forces. Taking into account the directions of the forces, find the magnitude of the force applied by the ground on the man in part (b).
Answer:
a) F = 1.26 10⁵ N, b) F = 2.255 10³ N, c) F_ {soil} = 3078 N
Explanation:
For this exercise we will use the relationship between momentum and moment
I = Δp
F t = p_f -p₀
a) with stiff legs, final speed is zero, initial velocity is down
Ft = 0-p₀
F = m v / t
let's calculate
F = 84.0 6.82 / 4.56 10⁻³
F = 1.26 10⁵ N
b) bending the legs
let's calculate
F = 84.0 6.82 / 0.254
F = 2.255 10³ N
c) It is requested to calculate the force of the ground on the man
∑ F = F_soil -W
F_soil = F + W
F_ {soil} = 2.255 103 + 84 9.8
F_ {soil} = 3078 N
Au cours d'un orage le bruit de tonnerre met 7 secondes pour parvenir aux oreilles d'un observateur _1_ à quelle distance est tombée la foudre sachant que dans l'air le son se propage à la vitesse de 340 m/s . _2_ quel est le temps mis par la lumière de l'éclair pour franchir cette distance à l'aide de chronomètre courants
Answer:
[tex]2380\ \text{m}[/tex]
[tex]7.93\times 10^{-6}\ \text{s}[/tex]
Explanation:
t = Temps mis par la foudre pour parcourir la distance = 7 secondes
v = Vitesse du son dans l'air = 340 m / s
La distance est donnée par
[tex]s=vt\\\Rightarrow s=340\times 7\\\Rightarrow s=2380\ \text{m}[/tex]
L'éclair est tombé à une distance de [tex]2380\ \text{m}[/tex]
c = Speed of light = [tex]3\times 10^8\ \text{m/s}[/tex]
Le temps est donné par
[tex]t=\dfrac{s}{c}\\\Rightarrow t=\dfrac{2380}{3\times 10^8}\\\Rightarrow t=7.93\times 10^{-6}\ \text{s}[/tex]
Le temps mis par la lumière pour parcourir la distance est de [tex]7.93\times 10^{-6}\ \text{s}[/tex].
Which describes the innermost layer of Earth?
Answer and Explanation:Option A->The innermost layer of the earth is known as the core. It is divided into inner core and outer core. It comprises of a high concentration of nickel and iron.
Newton's first law states that objects do not change their velocity unless acted upon
by an outside force. When throwing a ball the ball initially accelerates from the force
provided by your arm and then begins to slow down.
What force(s) are responsible for the deceleration of the ball?
Answer:
Air resistance/Drag (this is the proper term for air resistance) or gravity or friction
It depends on the direction and if you throw it across a surface or if you throw it straight upwards.
I hope this helps!!
Answer:
Newton's first law: An object at rest remains at rest, or if in motion, remains in motion at a constant velocity unless acted on by a net external force.
Explanation:
Which of the following is considered to be a fine motor skill?
Jumping rope
Drawing
Running
Riding bicycle
An object carries a +15.5 µC charge. It is 0.525 m from a -7.25 µC charge. What is the magnitude of the electric force on the object?
Answer:
the force of attraction between the two charges is 3.55 N.
Explanation:
Given;
first charge carried by the object, q₁ = 15.5 µC
second charge carried by the q₂ = -7.25 µC
distance between the two charges, r = 0.525 m
The force of attraction between the two charges is calculated as;
[tex]F = \frac{kq_1q_2}{r^2} \\\\F = \frac{(9\times 10^9)(15\times 10^{-6})(7.25\times 10^{-6})}{(0.525)^2} \\\\F = 3.55 \ N[/tex]
Therefore, the force of attraction between the two charges is 3.55 N.
What could you have done to reduce those errors?
Use the information and picture to answer the following question.
A student creates a poster with two models that show magnified views of the molecular motion in a solid and a liquid.
image
The student forgets to label the models with phases.
Answering which question would BEST help identify which model is in the solid phase?
A.
Which model shows the molecules vibrating in a fixed arrangement?
B.
Which model shows the molecules bouncing around each other?
C.
Which model shows the molecules sliding past each other?
D.
Which model shows the molecules spreading out at different angles?
Answer:
The answer is A
Explanation:
Solids vibrate in a fixed arrangiment, so to find which is a solid look for the one that vibrates in a fixed arrangiment.
According to the forces of attraction, the question which would best identify model is in solid phase is which model shows the molecules vibrating in a fixed arrangement?
What are forces of attraction?Forces of attraction is a force by which atoms in a molecule combine. it is basically an attractive force in nature. It can act between an ion and an atom as well.It varies for different states of matter that is solids, liquids and gases.
The forces of attraction are maximum in solids as the molecules present in solid are tightly held while it is minimum in gases as the molecules are far apart . The forces of attraction in liquids is intermediate of solids and gases.
The physical properties such as melting point, boiling point, density are all dependent on forces of attraction which exists in the substances.
Learn more about forces of attraction,here:
https://brainly.com/question/23841038
#SPJ2
A bat with a mass of 0.35 kg travels at a rate of 15 m/s. What is the animal's momentum?
Answer:
momentum= mass x velocity = 0.35x15= 5.25kgm/s
A 0.22kg mousetrap car has 3.1 J of potential energy due to the spring in the mouse
trap. What is the maximum speed the car will reach? Show your work and include units.
Answer:
r56
Explanation:
The Doppler Effect for sound occurs when:
a) the speed of the wave changes
b) the height of the wave changes
c) the distance between the waves change
d)the moving object decreases in speed
The gravitational force between two bodies is 250N . What will the new force be if one of the masses is tripled?
If one of the masses is tripled, then their product is tripled, and the force between them is tripled. The new force is 750N .
What part of the atom takes up most of the atoms space?
The atom
The electron cloud
The nucleus
The bottom part
Answer:
The electrons
Explanation:
Why does it take a long time to start Penicillin production?
Answer:
the growth of mycelial, by which reduction in carbohydrate level occurs in the medium. Because of this reduction in carbohydrate level
Explanation:
An isloated point charge produce an electric field with magnitude E at a point 2 m away. At a point 1 m from the charge magnitude of the charge is .. A. E B. 2E C. 4E D. E/2
Answer:
the correct answer is C, E’= 4E
Explanation:
In this exercise you are asked to calculate the electric field at a given point
E = [tex]k \frac{q}{r^2}[/tex]
indicates that the field is E for r = 2m
E = [tex]\frac{ k q}{4}[/tex] (1)
the field is requested for a distance r = 1 m
E ’= k \frac{q}{r'^2}
E ’= k q / 1
from equation 1
4E = k q
we substitute
E’= 4E
so the correct answer is C
the energy produced by the internal motion of atoms? electrical , thermal, chemical, nuclear
Answer:
Thermal energy, or heat, is the energy that comes from the movement of atoms and molecules in a substance. Heat increases when these particles move faster. Geothermal energy is the thermal energy in the earth. Motion energy is energy stored in the movement of objects. so the answer is thermal energy
work and power!
______is the amount of work done over time a. Efficiency C. Power b. Newton d. Horsepower
Answer:
The work done in a unit of time is C. Power.
Explanation:
Hope this helps
In a ride in an amusement park, a carriage of mass 450 kg is travelling horizontally at a speed of 18 m/s. It passes through a shallow tank containing stationary water. The tank is of length 9.3 m. The carriage leaves the tank at a speed of 13 m/s. PT 3 a.) Calculate the change in kinetic energy of the cart while it passes through the water tank J (Hint: Change
Answer:
98.
Explanation:
divide
The change in the kinetic energy of the cart is equal to 34875 J.
What is kinetic energy?The energy which is possessed by a moving body because of its motion is known as kinetic energy. Work should be done in order to bring the change in the kinetic energy of a moving object.
The kinetic energy of a moving object can be determined from the formula mentioned below:
K.E. = ½mv² where ‘m’ and 'v' is the mass and velocity of the object.
Given, the mass of the carriage, m = 450 Kg
The speed of the carriage, u = 18 m/s
The initial kinetic energy of the cart = (1/2) × 450 × (18)²
(K.E.)₁ = 72900 J
The final speed of the cart, v = 13 m/s
The final kinetic energy of of the cart = (1/2) × 450 × (13)²
(K.E.)₂ = 38025 J
The change in the kinetic energy of the cart = (K.E.)₂ - (K.E.)₁
Change in the kinetic energy = 72900 - 38025 = 34875 J
Learn more about kinetic energy, here:
brainly.com/question/15764612
#SPJ2
A pathogen has entered your body and you become sick. You develop a fever and vomit. This is your body's way of trying to maintain
HELP FAST
How did the lab activities help you answer the lesson question, "How do atmospheric conditions influence weather patterns?" What did you learn from conducting this lab?
Answer:
not enough
Explanation:
information given
Answer:
Sample Response: In the lab, I discovered the air pressure, air temperature, and relative humidity conditions that create snow, rain, thunderstorms, fog, and clear skies. I learned that low-pressure areas usually experience snowy, rainy, and stormy weather, and that high-pressure areas usually experience either foggy or sunny weather. Knowing how these atmospheric conditions influence weather help weather forecasters predict weather patterns through maps and other information.
(Sorry this was not fast enough )